The per-STA bandwidth handling is completely confusing, given
the function names etc.
Move everything to sta_info.c and rename the functions to
accurately reflect what they return:
- ieee80211_sta_bw_capability()
- ieee80211_sta_current_bw() can return the appropriate
bandwidth in the desired direction (a new enum)
At any given time, the bandwidth with which we expect to receive
frames from a station may differ from the bandwidth with which
we may transmit frames to the station; this will happen either
during RX OMI negotiation, or for a long time if the station
used an HT Notify Channel Width frame. We also implement the
(VHT) Operating Mode Notification as an asymmetric setting, even
if the spec would seem to imply it could be symmetric.
Also rename the 'cur_max_bandwidth' value to 'op_mode_bw' which
matches the 'op_mode_nss', indicating more clearly what it _is_
rather than how it's _used_. It's not quite precise (NSS is)
since it's also HT chanwidth notification, but that seems OK.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.09ae71b74d5c.Ib59c2ac82e030559d1f7d462f06ba3488a090946@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Instead of validating the AP operation elements and PHY regulatory
individually in each caller, which missed CSA and color change,
pass the channel to the beacon parsing function and validate the
parameters there. This adds it to the missing places.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.2a334f0bc247.I2e0b12ce5eddd422a553d10ba2ed7dcd0fbb1871@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In addition to providing HE/EHT/UHR operation, also check
and provide HT/VHT operation, so that drivers have it and
can use it, e.g. to correctly calculate station bandwidth.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.32ad98454543.Ia9692671b699164edcc0bdaf4fdbdbefc50b18f8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If any of these are present, the code only assigns pointers when
they're also long enough. Instead of ignoring them in that case,
reject the configuration instead.
Also add error messages to existing error paths.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.40c24d7ee2df.Ib1368e4d8e33a396f332a38a6ba6708fd188f143@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The HT/VHT/HE/EHT/UHR operation can change, and might thus be
updated on each beacon update. Move them to the beacon struct
and parse them out of the beacon also on updates, not just on
starting the AP.
This also fixes checks in two ways:
- Regulatory checks in nl80211_validate_ap_phy_operation() are
now done also on updates, disallowing enabling HE/EHT/UHR on
channels that don't allow that after start. This checks only
operation now, but clients can't use it without operation.
- NL80211_ATTR_UHR_OPERATION is now required whenever UHR is
present in the beacon, and rejected otherwise.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.f70758a46904.I0d21120b41eed661eefc61d5417dadaae7145845@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are three versions of this function, but now there's
no caller to ieee80211_sta_cap_rx_bw() and the chandef is
always given. Rename the functions to have one underscore
less and rely on the chandef being passed.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.62f48003f11c.Ib84ab7aeab8b278ab46d85b142a66bf330909eb6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, the initial STA bandwidth is set during each
parsing of HT/VHT/... elements to the station capabilities,
multiple times, in a confusing way that's not very good in
the case of NAN stations either.
For now, keep the NULL chandef pointer and all that, but
clean up the initial handling of NSS/BW capabilities and
then apply the VHT operation mode on top of that. This
clarifies the code and the client code now also handles
the bandwidth change from Operating Mode Notification in
association response.
The HT code is completely unnecessary now, since the VHT
(soon to be renamed) function will be called and handles
HT as well.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.a4d88eb27a8d.Id7a316e75e7e3dce2023d987e6939060f5286378@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Move ieee80211_sta_init_nss() from VHT code to station code,
and disentangle it from rate control. This way, it becomes
clearer when 'rx_nss' is set up.
While doing this, fix the client side code to set up
link_sta->op_mode_nss instead of link_sta->pub->rx_nss for
the opmode element in association response, and remove the
(now wrong) comment about handling that in the function.
type=cleanup
ticket=none
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-on: https://gerritwcs.ir.intel.com/c/iwlwifi-stack-dev/+/273695
Tested-by: iil_jenkins iil_jenkins <EC.GER.UNIX.IIL.JENKINS@INTEL.COM>
tested: iil_jenkins iil_jenkins <EC.GER.UNIX.IIL.JENKINS@INTEL.COM>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.bef3d07beeb6.I97fb93ccc1b366110ab23de58fcd73676cdd85d6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This function is only called for at least HT capable stations,
so doesn't need to differentiate 20/20_NOHT. Also, the check
for VHT 160 MHz support is wrong, since a station could have
support for both and the AP is using 80+80, but nothing cares
anyway, so we don't need that.
Simplify the function and move it to util.c since it now no
longer is related to VHT, and also doesn't need a station.
Also use the new function in ieee80211_get_sta_bw() for the
chandef calculations, it just needs to handle the 20/20-noht
separately; while at it fix that to handle HE stations.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.7b0be1059436.I573add4e3ed68b15f8b45122d053ac523afe4025@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The opmode change notification is entirely unused by existing
userspace except for printing out the values. As such, there's
no need to keep it perfectly accurate, and the implementation
in mac80211 doesn't report it correctly today. Add a note in
the documentation that it may not differentiate 80+80 and 160.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.87d5b1ce688f.Ia9a0769d52dcfe56f7b0dff903ed14db3ef04920@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This function is only used by TDLS, but is more or less equivalent
to ieee80211_sta_cap_rx_bw() (which takes OMI into account, but that
won't be used in TDLS), except it tries to differentiate 80+80 and
160, but then caller doesn't care about that. Remove the function.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.138728393e2b.I4ea9221cafcfd034dda430e76de82eec59ab1e71@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When getting the station's bandwidth for TDLS chanctx
updates, pass the chandef so that the band can be used
in _ieee80211_sta_cap_rx_bw(), instead of this using
ieee80211_sta_cap_rx_bw() which looks it up from the
link.
This removes the last user of ieee80211_sta_cap_rx_bw().
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.cc7c1590e953.Id2381d2b5a9d1ded170501976240d4fca23ee35c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When getting the bandwidth the station uses in order to
calculate the channel context's min_def, pass the channel
for the link to _ieee80211_sta_cap_rx_bw() instead of using
ieee80211_sta_cap_rx_bw(), which looks it up.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.d2bdf106a39f.I6ae07289a272dd9e27118f9fa324a4865f994003@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When an HT channel width update comes in, don't use the
capability of the station, but rather set it to max as
the capability will be taken into account anyway when
using the value.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.bab6e4195d78.I9683605229ed1b75ff5a9c14e967762e88b3fc36@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Instead of calculating the individual maximum for each
station from its capabilities, just unconditionally set
cur_max_bandwidth to IEEE80211_STA_RX_BW_MAX. This still
works because cur_max_bandwidth is only used together
with the capabilities of the station anyway, and then
adjusted by HT channel width notification or VHT opmode
notification action frames.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.43cdb11b5c7e.I99a7ea2ab10b6fffb68a401a26b98d546e428c11@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The NAN guards here make little sense, just don't WARN inside
the function (and return maximum instead of minimum). Otherwise
we need to guard more calls, such as in EHT in the future.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260415144514.be6bc3fd5fdf.I38ce6c763c361a3ce50618e820a0818eb18e49dd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The error message emitted by nl80211_validate_key_link_id() when a group
key install on an MLO wdev is missing the link ID reads "link ID must
for MLO group key", which is missing the words "be set". This makes the
error harder to grep and parse in userspace logs, and is reported
verbatim by wpa_supplicant via its nl80211 extack relay, e.g.:
wpa_supplicant: nl80211: kernel reports: link ID must for MLO group key
The sibling error strings in the same helper already use grammatical
phrasing ("link ID not allowed for pairwise key", "invalid link ID for
MLO group key", "link ID not allowed for non-MLO group key"). Fix this
one to match.
No functional change.
Fixes: e7a7b84e33 ("wifi: cfg80211: Add link_id parameter to various key operations for MLO")
Signed-off-by: Louis Kotze <loukot@gmail.com>
Link: https://patch.msgid.link/20260414122728.92234-1-loukot@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Duplicate entries in wiphy->cipher_suites do not describe any
additional capability, but cfg80211 currently accepts them and leaves
individual consumers to deal with them.
One such consumer is the WEXT compatibility code, which appends a WEP
key length for each WEP cipher entry it sees. Repeated WEP entries can
therefore overflow the fixed iw_range::encoding_size array returned by
SIOCGIWRANGE.
Reject duplicate cipher suite entries in wiphy_register() instead.
This keeps the cipher suite invariant in one place and makes malformed
wiphy descriptions fail early with -EINVAL, rather than relying on a
single cfg80211 user to handle duplicates correctly.
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Yuqi Xu <xuyuqiabc@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Link: https://patch.msgid.link/20260413123000.1480661-1-n05ec@lzu.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The arm-linux-gnueabi-gcc compiler, align the field followed by union
members, causing size of struct ieee80211_rx_status over skb->cb
(48 bytes). By investigation, the union member starts at offset 32,
and the offset of next field rate_idx is 36 instead of expected 33, and
the total size is (unexpected) 52.
When compiling rtw88 driver, it throws:
In file included from /work/linux-src/linux-stable/include/linux/string.h:386,
from /work/linux-src/linux-stable/include/linux/bitmap.h:13,
from /work/linux-src/linux-stable/include/linux/cpumask.h:11,
from /work/linux-src/linux-stable/include/linux/smp.h:13,
from /work/linux-src/linux-stable/include/linux/lockdep.h:14,
from /work/linux-src/linux-stable/include/linux/mutex.h:17,
from /work/linux-src/linux-stable/include/linux/kernfs.h:11,
from /work/linux-src/linux-stable/include/linux/sysfs.h:16,
from /work/linux-src/linux-stable/include/linux/kobject.h:20,
from /work/linux-src/linux-stable/include/linux/dmi.h:6,
from pci.c:5:
In function 'fortify_memcpy_chk',
inlined from 'rtw_pci_rx_napi.constprop' at pci.c:1095:4:
/work/linux-src/linux-stable/include/linux/fortify-string.h:569:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning]
569 | __write_overflow_field(p_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
After this patch, the size of struct ieee80211_rx_status is 48.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260411072509.1556635-1-pkshih@realtek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the final version of 802.11be-2024, Transition Delay and Padding
Delay subfield are for both EMLSR and EMLMR. Depending if the mode is
EMLSR or EMLMR, the interpretation of the encoded value might change.
Define all the constants and helpers to interpret delay subfields both
in EMLSR and EMLMR mode.
Signed-off-by: Pablo Martin-Gomez <pmartin-gomez@freebox.fr>
Link: https://patch.msgid.link/20260410170429.343617-4-pmartin-gomez@freebox.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the finalized version of 802.11be-2024, the EMLMR delay values have
been merged in the EMLSR Padding/Transition Delay subfields and
therefore the subfield EMLMR Delay has been converted to a reserved field.
Signed-off-by: Pablo Martin-Gomez <pmartin-gomez@freebox.fr>
Link: https://patch.msgid.link/20260410170429.343617-3-pmartin-gomez@freebox.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In Table 9-417m of 802.11be-2024, Transition Timeout is defined up
to value 10 for a Transition Timeout of 64TUs. The value 11 is reserved
and does not correspond to a Transition Timeout of 128TUs.
Signed-off-by: Pablo Martin-Gomez <pmartin-gomez@freebox.fr>
Link: https://patch.msgid.link/20260410170429.343617-2-pmartin-gomez@freebox.fr
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A yield-triggered crash can happen when a newly forked sched_entity
enters the fair class with se->rel_deadline unexpectedly set.
The failing sequence is:
1. A task is forked while se->rel_deadline is still set.
2. __sched_fork() initializes vruntime, vlag and other sched_entity
state, but does not clear rel_deadline.
3. On the first enqueue, enqueue_entity() calls place_entity().
4. Because se->rel_deadline is set, place_entity() treats se->deadline
as a relative deadline and converts it to an absolute deadline by
adding the current vruntime.
5. However, the forked entity's deadline is not a valid inherited
relative deadline for this new scheduling instance, so the conversion
produces an abnormally large deadline.
6. If the task later calls sched_yield(), yield_task_fair() advances
se->vruntime to se->deadline.
7. The inflated vruntime is then used by the following enqueue path,
where the vruntime-derived key can overflow when multiplied by the
entity weight.
8. This corrupts cfs_rq->sum_w_vruntime, breaks EEVDF eligibility
calculation, and can eventually make all entities appear ineligible.
pick_next_entity() may then return NULL unexpectedly, leading to a
later NULL dereference.
A captured trace shows the effect clearly. Before yield, the entity's
vruntime was around:
9834017729983308
After yield_task_fair() executed:
se->vruntime = se->deadline
the vruntime jumped to:
19668035460670230
and the deadline was later advanced further to:
19668035463470230
This shows that the deadline had already become abnormally large before
yield_task_fair() copied it into vruntime.
rel_deadline is only meaningful when se->deadline really carries a
relative deadline that still needs to be placed against vruntime. A
freshly forked sched_entity should not inherit or retain this state.
Clear se->rel_deadline in __sched_fork(), together with the other
sched_entity runtime state, so that the first enqueue does not interpret
the new entity's deadline as a stale relative deadline.
Fixes: 82e9d0456e ("sched/fair: Avoid re-setting virtual deadline on 'migrations'")
Analyzed-by: Hui Tang <tanghui20@huawei.com>
Analyzed-by: Zhang Qiao <zhangqiao22@huawei.com>
Signed-off-by: Zicheng Qu <quzicheng@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260424071113.1199600-1-quzicheng@huawei.com
Similar to how pick_next_entity() must dequeue delayed entities, so too must
wakeup_preempt_fair(). Any delayed task being found means it is eligible and
hence past the 0-lag point, ready for removal.
Worse, by not removing delayed entities from consideration, it can skew the
preemption decision, with the end result that a short slice wakeup will not
result in a preemption.
tip/sched/core tip/sched/core +this patch
cyclictest slice (ms) (default)2.8 8 8
hackbench slice (ms) (default)2.8 20 20
Total Samples | 22559 22595 22683
Average (us) | 157 64( 59%) 59( 8%)
Median (P50) (us) | 57 57( 0%) 58(- 2%)
90th Percentile (us) | 64 60( 6%) 60( 0%)
99th Percentile (us) | 2407 67( 97%) 67( 0%)
99.9th Percentile (us) | 3400 2288( 33%) 727( 68%)
Maximum (us) | 5037 9252(-84%) 7461( 19%)
Fixes: f12e148892 ("sched/fair: Prepare pick_next_task() for delayed dequeue")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260422093400.319251-1-vincent.guittot@linaro.org
Vincent reported that my rework of his original patch lost a little
something.
Specifically it got the return value wrong; it should not compare
against the old se->vlag, but rather against the current value. Since
the thing that matters is if the effective vruntime of an entity is
affected and the thing needs repositioning or not.
Fixes: 059258b0d4 ("sched/fair: Prevent negative lag increase during delayed dequeue")
Reported-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://patch.msgid.link/20260423094107.GT3102624%40noisy.programming.kicks-ass.net
The convert_chmap_v3() has a loop with its increment size of
cs_desc->wLength, but we forgot to validate cs_desc->wLength itself,
which may lead to potential endless loop by a malformed descriptor.
Add a proper size check to abort the loop for plugging the hole.
Fixes: ecfd41166b ("ALSA: usb-audio: Validate UAC3 cluster segment descriptors")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20260427152224.15276-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
At parsing UAC3 streams, we allocate a PD object at each time, and
either assign or free it. But there is a case where the PD object may
be leaked; namely, in __snd_usb_parse_audio_interface() loop, when an
audioformat shares the same endpoint with others, it's put to a link
and returns from snd_usb_add_audio_stream(), but the PD is forgotten
afterwards. Overall, the treatment of PD object in the parser code is
a bit flaky, and we should be more careful about the object ownership.
This patch tries to fix the above case and improve the code a bit.
The pd object is now managed with the auto-cleanup in the loop, and
the ownership is updated when the pd object gets assigned to the
stream, which guarantees the release of the leftover object.
Fixes: 7edf3b5e6a ("ALSA: usb-audio: AudioStreaming Power Domain parsing")
Link: https://patch.msgid.link/20260427151508.12544-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The previous fix to handle the error from setup_card() caused a
regression for the models that have no dedicated input device;
snd_usb_caiaq_input_init() just returns -EINVAL, and we treat it as a
fatal error although it should be ignored.
As a regression fix, change the error code to -ENODEV, and ignore this
error in the callee, to continue probing.
Fixes: 28abd224db ("ALSA: caiaq: Handle probe errors properly")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221423
Link: https://patch.msgid.link/20260427145642.6637-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The previous fix for handling the error from setup_card() missed that
an internal URB cdev->ep1_in_urb might have been already submitted
beforehand. In the normal case, this URB gets killed at the
disconnection, but in the error path, we didn't do it, hence there can
be a potential leak.
Fix it in the error path for setup_card(), too.
Fixes: 28abd224db ("ALSA: caiaq: Handle probe errors properly")
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20260427123819.890185-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
On VXLAN over IPsec egress, xfrm{4,6}_transport_output() blindly
overwrite inner_transport_header (== the inner TCP header saved in VXLAN
iptunnel_handle_offloads() -> skb_reset_inner_headers()) with the
current transport_header (== the VXLAN outer UDP header set by
udp_tunnel_xmit_skb()).
This was a latent bug, harmless until commit [1] added a doff validation
check in qdisc_pkt_len_segs_init() for encapsulated GSO packets. With
the wrong inner_transport_header set by xfrm, qdisc_pkt_len_segs_init()
interprets inner_transport_header as a TCP header, reads doff=0 from the
upper byte of the VNI and drops the packet with DROP_REASON_SKB_BAD_GSO.
Besides the use in GSO to determine the header size of segmented
packets, inner_transport_header might be used by drivers to set up
inner checksum offloading by pointing the HW to the inner transport
header. A quick browse through available drivers shows that mlx5 uses
skb->csum_start specifically for this scenario, while others either
don't support VXLAN over IPsec crypto offload (ixgbe) or the HW is
capable of parsing the packets itself (nfp, Chelsio).
But in all cases, it is more correct to let the inner_transport_header
point to the innermost header instead of overwriting it in xfrm.
So fix this by guarding all four inner header save sites in
xfrm_output.c (xfrm{4,6}_transport_output, xfrm{4,6}_tunnel_encap_add)
with a check for skb->inner_protocol. When inner_protocol is set, a
tunnel layer (VXLAN, Geneve, GRE, etc.) has already saved the correct
inner header offsets and they must not be overwritten. When
inner_protocol is zero, no prior tunnel encapsulation exists and xfrm
must save the inner headers itself. The tunnel mode checks are only
added for completion, since they aren't strictly required, as
xfrm_output() forces software GSO in tunnel mode before encap.
This makes the previously added test pass:
# ./tools/testing/selftests/drivers/net/hw/ipsec_vxlan.py
TAP version 13
1..4
ok 1 ipsec_vxlan.test_vxlan_ipsec_crypto_offload.outer_v4_inner_v4
ok 2 ipsec_vxlan.test_vxlan_ipsec_crypto_offload.outer_v4_inner_v6
ok 3 ipsec_vxlan.test_vxlan_ipsec_crypto_offload.outer_v6_inner_v4
ok 4 ipsec_vxlan.test_vxlan_ipsec_crypto_offload.outer_v6_inner_v6
# Totals: pass:4 fail:0 xfail:0 xpass:0 skip:0 error:0
[1] commit 7fb4c19670 ("net: pull headers in qdisc_pkt_len_segs_init()")
Fixes: f1bd7d659e ("xfrm: Add encapsulation header offsets while SKB is not encrypted")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
There are VXLAN tests and IPsec tests, but there is no test that
combines the two protocols and exercises the tunnel-over-ipsec code
paths. Fix that by adding a traffic test with VXLAN and IPsec using
crypto offload. This is runnable on HW which supports ESP offload (so no
nsim unfortunately).
Traffic is done with iperf3 and the test validates that there are no
packet drops and iperf3 can get to at least 100 Mbps (a very
conservative value on today's crypto offload HW, as it can typically
reach multi-Gbps rates).
Ran right now, the test fails due to a recently exposed bug in xfrm,
which will be fixed in the next patch:
# ./tools/testing/selftests/drivers/net/hw/ipsec_vxlan.py
TAP version 13
1..4
# Check| At ./tools/testing/selftests/drivers/net/hw/ipsec_vxlan.py,
# line 161, in test_vxlan_ipsec_crypto_offload:
# Check| ksft_eq(drops_after - drops_before, 0,
# Check failed 189 != 0 TX drops during VXLAN+IPsec
# Check| At ./tools/testing/selftests/drivers/net/hw/ipsec_vxlan.py,
# line 163, in test_vxlan_ipsec_crypto_offload:
# Check| ksft_ge(bw_gbps, 0.1,
# Check failed 0.0015058278404812596 < 0.1 Minimum 100Mbps over
# VXLAN+IPsec
not ok 1 ipsec_vxlan.test_vxlan_ipsec_crypto_offload.outer_v4_inner_v4
...
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The default timeout of cmd() is 5 seconds and Iperf3Runner requests the
iperf3 client to run for 10 seconds, which clearly doesn't work since
commit [1] enforced the timeout parameter.
Use a value derived from duration as timeout (+5 seconds for
startup/teardown/various other overhead).
[1] commit f0bd193166 ("selftests: net: fix timeout passed as positional argument to communicate()")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
In aw88395_i2c_probe(), if `devm_gpiod_get_optional()` fails, it returns
an ERR_PTR() error pointer. The current code only prints a message and
continues execution, leaving `aw88395->reset_gpio` as an invalid pointer.
Later, in `aw88395_hw_reset()`, this invalid pointer is passed to
`gpiod_set_value_cansleep()`, which dereferences it and causes a kernel
panic.
For optional GPIOs, `devm_gpiod_get_optional()` returns NULL if the GPIO
is not defined in the DT, which is safe. If it returns an ERR_PTR, it
means a real error occurred (e.g., -EPROBE_DEFER) and the probe must be
aborted.
Also, since the GPIO is optional, remove the dev_err() log in
aw88395_hw_reset() when the GPIO is missing to match the optional
semantics. This also fixes a potential NULL pointer dereference as
aw_pa is not initialized when aw88395_hw_reset() is called.
Signed-off-by: wangdicheng <wangdicheng@kylinos.cn>
Link: https://patch.msgid.link/20260428023408.46420-1-wangdich9700@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
coreboot_table_populate() iterates over firmware-provided table entries
with no validation that the entries stay within the mapped memory
region. A corrupt table with a large `entry->size` advances `ptr_entry`
past the mapped region, causing an out-of-bounds read on the next
iteration.
Add a check before dereferencing `ptr_entry` to ensure the entry header
is readable, and a second check after reading `entry->size` to ensure
the full entry stays within the mapped region.
Pass `len` from coreboot_table_probe() into coreboot_table_populate() to
make the mapped region size available for validation.
Signed-off-by: Titouan Ameline de Cadeville <titouan.ameline@gmail.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Link: https://lore.kernel.org/r/20260426214739.117131-1-titouan.ameline@gmail.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
netpoll_setup() decides whether to auto-populate the local source
address by testing np->local_ip.ip, which only inspects the first 4
bytes of the union inet_addr storage.
For an IPv6 netpoll whose caller-supplied local address has a zero
high-32 bits (::1, ::<suffix>, IPv4-mapped ::ffff:a.b.c.d, etc.), this
misdetects the address as unset (which they are not, but the first
4 bytes are empty), calls netpoll_take_ipv6() and overwrites it with
whatever matching link-local/global address the device happens to expose
first.
Introduce a helper netpoll_local_ip_unset() that picks the correct
family-aware test (ipv6_addr_any() for IPv6, !.ip for IPv4) and use it
from netpoll_setup().
Reproducer is something like:
echo "::2" > local_ip
echo 1 > enabled
cat local_ip
# before this fix: 2001:db8::1 (caller-supplied ::2 was clobbered)
# after this fix: ::2
Fixes: b7394d2429 ("netpoll: prepare for ipv6")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260424-netpoll_fix-v1-1-3a55348c625f@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tcp_clamp_probe0_to_user_timeout() computes remaining time in jiffies
using subtraction with an unsigned lvalue. If elapsed probing time
exceeds the configured TCP_USER_TIMEOUT, the underflow yields a large
value.
This ends up re-arming the probe timer for a full backoff interval
instead of expiring immediately, delaying connection teardown beyond
the configured timeout.
Fix this by preventing underflow so user-set timeout expiration is
handled correctly without extending the probe timer.
Fixes: 344db93ae3 ("tcp: make TCP_USER_TIMEOUT accurate for zero window probes")
Link: https://lore.kernel.org/r/20260414013634.43997-1-ahacigu.linux@gmail.com
Signed-off-by: Altan Hacigumus <ahacigu.linux@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260424014639.54110-1-ahacigu.linux@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some physical adapters on Power systems do not support segmentation
offload when the MSS is less than 224 bytes. Attempting to send such
packets causes the adapter to freeze, stopping all traffic until
manually reset.
Implement ndo_features_check to disable GSO for packets with small MSS
values. The network stack will perform software segmentation instead.
The 224-byte minimum matches ibmvnic
commit <f10b09ef68> ("ibmvnic: Enforce stronger sanity checks
on GSO packets")
which uses the same physical adapters in SEA configurations.
The issue occurs specifically when the hardware attempts to perform
segmentation (gso_segs > 1) with a small MSS. Single-segment GSO packets
(gso_segs == 1) do not trigger the problematic LSO code path and are
transmitted normally without segmentation.
Add an ndo_features_check callback to disable GSO when MSS < 224 bytes.
Also call vlan_features_check() to ensure proper handling of VLAN packets,
particularly QinQ (802.1ad) configurations where the hardware parser may
not support certain offload features.
Validated using iptables to force small MSS values. Without the fix,
the adapter freezes. With the fix, packets are segmented in software
and transmission succeeds. Comprehensive regression testing completedd
(MSS tests, performance, stability).
Fixes: 8641dd8579 ("ibmveth: Add support for TSO")
Cc: stable@vger.kernel.org
Reviewed-by: Brian King <bjking1@linux.ibm.com>
Tested-by: Shaik Abdulla <shaik.abdulla1@ibm.com>
Tested-by: Naveed Ahmed <naveedaus@in.ibm.com>
Signed-off-by: Mingming Cao <mmc@linux.ibm.com>
Link: https://patch.msgid.link/20260424162917.65725-1-mmc@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
neigh_xmit always releases the skb, except when no neighbour table is
found. But even the first added user of neigh_xmit (mpls) relied on
neigh_xmit to release the skb (or queue it for tx).
sashiko reported:
If neigh_xmit() is called with an uninitialized neighbor table (for
example, NEIGH_ND_TABLE when IPv6 is disabled), it returns -EAFNOSUPPORT
and bypasses its internal out_kfree_skb error path. Because the return
value of neigh_xmit() is ignored here, does this leak the SKB?
Assume full ownership and remove the last code path that doesn't
xmit or free skb.
Fixes: 4fd3d7d9e8 ("neigh: Add helper function neigh_xmit")
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260424145843.74055-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With CONFIG_IP_MROUTE_MULTIPLE_TABLES=n, ipmr_fib_lookup()
does not check if net->ipv4.mrt is NULL.
Since default_device_exit_batch() is called after ->exit_rtnl(),
a device could receive IGMP packets and access net->ipv4.mrt
during/after ipmr_rules_exit_rtnl().
If ipmr_rules_exit_rtnl() had already cleared it and freed the
memory, the access would trigger null-ptr-deref or use-after-free.
Let's fix it by using RCU helper and free mrt after RCU grace
period.
In addition, check_net(net) is added to mroute_clean_tables()
and ipmr_cache_unresolved() to synchronise via mfc_unres_lock.
This prevents ipmr_cache_unresolved() from putting skb into
c->_c.mfc_un.unres.unresolved after mroute_clean_tables()
purges it.
For the same reason, timer_shutdown_sync() is moved after
mroute_clean_tables().
Since rhltable_destroy() holds mutex internally, rcu_work is
used, and it is placed as the first member because rcu_head
must be placed within <4K offset. mr_table is alraedy 3864
bytes without rcu_work.
Note that IP6MR is not yet converted to ->exit_rtnl(), so this
change is not needed for now but will be.
Fixes: b22b018674 ("ipmr: Convert ipmr_net_exit_batch() to ->exit_rtnl().")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260423053456.4097409-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reported a kernel BUG triggered from pn_socket_sendmsg() via
pn_socket_autobind():
kernel BUG at net/phonet/socket.c:213!
RIP: 0010:pn_socket_autobind net/phonet/socket.c:213 [inline]
RIP: 0010:pn_socket_sendmsg+0x240/0x250 net/phonet/socket.c:421
Call Trace:
sock_sendmsg_nosec+0x112/0x150 net/socket.c:797
__sock_sendmsg net/socket.c:812 [inline]
__sys_sendto+0x402/0x590 net/socket.c:2280
...
pn_socket_autobind() calls pn_socket_bind() with port 0 and, on
-EINVAL, assumes the socket was already bound and asserts that the
port is non-zero:
err = pn_socket_bind(sock, ..., sizeof(struct sockaddr_pn));
if (err != -EINVAL)
return err;
BUG_ON(!pn_port(pn_sk(sock->sk)->sobject));
return 0; /* socket was already bound */
However pn_socket_bind() also returns -EINVAL when sk->sk_state is not
TCP_CLOSE, even when the socket has never been bound and pn_port() is
still 0. In that case the BUG_ON() fires and panics the kernel from a
user-triggerable path.
Treat the "bind returned -EINVAL but pn_port() is still 0" case as a
regular error and propagate -EINVAL to the caller instead of crashing.
Existing callers already translate a non-zero return from
pn_socket_autobind() into -ENOBUFS/-EAGAIN, so returning -EINVAL here
only changes behaviour from panic to a normal errno.
Fixes: ba113a94b7 ("Phonet: common socket glue")
Reported-by: syzbot+706f5eb79044e686c794@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=706f5eb79044e686c794
Suggested-by: Remi Denis-Courmont <courmisch@gmail.com>
Signed-off-by: Morduan Zang <zhangdandan@uniontech.com>
Signed-off-by: zhanjun <zhanjun@uniontech.com>
Acked-by: Rémi Denis-Courmont <remi@remlab.net>
Link: https://patch.msgid.link/87A8960A2045AF3C+20260423010557.138124-1-zhangdandan@uniontech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Weiming Shi says:
====================
net/sched: taprio: fix NULL pointer dereference in class dump
Patch 1/2 is the fix: replace NULL entries in q->qdiscs[] with the
global &noop_qdisc singleton so that control-plane dump paths, as well
as the existing NULL guards in the data-plane enqueue/dequeue paths,
cannot deref a NULL child qdisc.
Patch 2/2 is a tdc regression test that drives the graft + delete +
class-dump sequence on a multi-queue netdevsim device. It panics the
vulnerable kernel and passes on the fixed one.
====================
Link: https://patch.msgid.link/20260422161958.2517539-2-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a regression test for the NULL pointer dereference fixed in the
previous commit. Before the fix, taprio_graft() stored NULL into
q->qdiscs[cl - 1] when an explicitly grafted child qdisc was deleted
via RTM_DELQDISC; the next RTM_GETTCLASS dump then crashed the kernel
in taprio_dump_class() while reading child->handle.
The test installs a taprio root qdisc on a multi-queue netdevsim
device, grafts a pfifo child onto class 8001:1, deletes that child,
and then performs a class dump. On a fixed kernel the dump succeeds
and all eight taprio classes are listed; on an unpatched kernel the
class dump crashes, which surfaces as a test failure.
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260422161958.2517539-4-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a TAPRIO child qdisc is deleted via RTM_DELQDISC, taprio_graft()
is called with new == NULL and stores NULL into q->qdiscs[cl - 1].
Subsequent RTM_GETTCLASS dump operations walk all classes via
taprio_walk() and call taprio_dump_class(), which calls taprio_leaf()
returning the NULL pointer, then dereferences it to read child->handle,
causing a kernel NULL pointer dereference.
The bug is reachable with namespace-scoped CAP_NET_ADMIN on any kernel
with CONFIG_NET_SCH_TAPRIO enabled. On systems with unprivileged user
namespaces enabled, an unprivileged local user can trigger a kernel
panic by creating a taprio qdisc inside a new network namespace,
grafting an explicit child qdisc, deleting it, and requesting a class
dump. The RTM_GETTCLASS dump itself requires no capability.
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000007: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f]
RIP: 0010:taprio_dump_class (net/sched/sch_taprio.c:2478)
Call Trace:
<TASK>
tc_fill_tclass (net/sched/sch_api.c:1966)
qdisc_class_dump (net/sched/sch_api.c:2326)
taprio_walk (net/sched/sch_taprio.c:2514)
tc_dump_tclass_qdisc (net/sched/sch_api.c:2352)
tc_dump_tclass_root (net/sched/sch_api.c:2370)
tc_dump_tclass (net/sched/sch_api.c:2431)
rtnl_dumpit (net/core/rtnetlink.c:6864)
netlink_dump (net/netlink/af_netlink.c:2325)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6959)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
</TASK>
Fix this by substituting &noop_qdisc when new is NULL in
taprio_graft(), a common pattern used by other qdiscs (e.g.,
multiq_graft()) to ensure the q->qdiscs[] slots are never NULL.
This makes control-plane dump paths safe without requiring individual
NULL checks.
Since the data-plane paths (taprio_enqueue and taprio_dequeue_from_txq)
previously had explicit NULL guards that would drop/skip the packet
cleanly, update those checks to test for &noop_qdisc instead. Without
this, packets would reach taprio_enqueue_one() which increments the root
qdisc's qlen and backlog before calling the child's enqueue; noop_qdisc
drops the packet but those counters are never rolled back, permanently
inflating the root qdisc's statistics.
After this change *old can be a valid qdisc, NULL, or &noop_qdisc.
Only call qdisc_put(*old) in the first case to avoid decreasing
noop_qdisc's refcount, which was never increased.
Fixes: 665338b2a7 ("net/sched: taprio: dump class stats for the actual q->qdiscs[]")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Tested-by: Weiming Shi <bestswngs@gmail.com>
Link: https://patch.msgid.link/20260422161958.2517539-3-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The main channel Received Signal Strength Indicator (RSSI) measurement
is used to determine whether an RF field is present or not. RSSI != 0
is interpreted as an RF Field is present. This does not take RF noise
and measurement inaccuracy into account, and results in false positives
in the field.
Define a noise level and make sure the RF field is only interpreted as
present when the RSSI is above the noise level.
Fixes: 851ee3cbf8 ("NFC: trf7970a: Don't turn on RF if there is already an RF field")
Signed-off-by: Paul Geurts <paul.geurts@prodrive-technologies.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Mark Greer <mgreer@animalcreek.com>
Link: https://patch.msgid.link/20260422100930.581237-1-paul.geurts@prodrive-technologies.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move init_completion(&spisg->completion) to before devm_request_irq()
to avoid a potential race condition where an interrupt could fire
before the completion structure is initialized.
Fixes: cef9991e04 ("spi: Add Amlogic SPISG driver")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260428-amlogic-spisg-v1-1-8eecc3b446d6@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
