error is initialized to -EPROTO but set by some of the internal
functions, unfortunately the last two checks assume error is set to
-EPROTO already for the failure case. Ensure it is by setting it
before these checks.
Fixes: 3d28e2397a ("apparmor: add support loading per permission tagging")
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
AppArmor dfas need a minimum of two states to be valid. State 0 is the
default trap state, and State 1 the default start state. When verifying
the dfa ensure that this is the case.
Fixes: c27c6bd2c4 ("apparmor: ensure that dfa state tables have entries")
Signed-off-by: John Johansen <john.johansen@canonical.com>
- Fix ordering of dma-buf cleanup versus device disabling in vfio-pci.
(Matt Evans)
- Resolve an inconsistent and incorrect use of spinlock-irq in the
virtio vfio-pci variant by conversion to mutex and proceed to
modernize and simplify driver with use of guards. (Alex Williamson)
- Resurrect the removal of the remaining class_create() call in vfio,
replacing with const struct class and class_register().
(Jori Koolstra, Alex Williamson)
- Fix NULL pointer dereference, properly serialize interrupt setup,
and cleanup interrupt state tracking in the cdx vfio bus driver.
(Prasanna Kumar T S M, Alex Williamson)
-----BEGIN PGP SIGNATURE-----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=54Nf
-----END PGP SIGNATURE-----
Merge tag 'vfio-v7.1-rc1-pt2' of https://github.com/awilliam/linux-vfio
Pull more VFIO updates from Alex Williamson:
- Fix ordering of dma-buf cleanup versus device disabling in vfio-pci
(Matt Evans)
- Resolve an inconsistent and incorrect use of spinlock-irq in the
virtio vfio-pci variant by conversion to mutex and proceed to
modernize and simplify driver with use of guards (Alex Williamson)
- Resurrect the removal of the remaining class_create() call in vfio,
replacing with const struct class and class_register() (Jori
Koolstra, Alex Williamson)
- Fix NULL pointer dereference, properly serialize interrupt setup, and
cleanup interrupt state tracking in the cdx vfio bus driver (Prasanna
Kumar T S M, Alex Williamson)
* tag 'vfio-v7.1-rc1-pt2' of https://github.com/awilliam/linux-vfio:
vfio/cdx: Consolidate MSI configured state onto cdx_irqs
vfio/cdx: Serialize VFIO_DEVICE_SET_IRQS with a per-device mutex
vfio/cdx: Fix NULL pointer dereference in interrupt trigger path
vfio: replace vfio->device_class with a const struct class
vfio/virtio: Use guard() for bar_mutex in legacy I/O
vfio/virtio: Use guard() for migf->lock where applicable
vfio/virtio: Use guard() for list_lock where applicable
vfio/virtio: Convert list_lock from spinlock to mutex
vfio/pci: Clean up DMABUFs before disabling function
- a new charlieplex GPIO keypad driver
- an update to aw86927 driver to support 86938 chip
- an update for Chrome OS EC keyboard driver to support Fn-<key> keymap
extension
- an UAF fix in debugfs teardown in EDT touchscreen driver
- a number of conversions for input drivers to use guard() and __free()
cleanup primitives
- several drivers for bus mice (inport, logibm) and other very old
devices have been removed
- OLPC HGPK PS/2 protocol has been removed as it's been broken and
inactive for 10 something years
- dedicated kpsmoused has been removed from psmouse driver
- other assorted cleanups and fixups.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaeji/QAKCRBAj56VGEWX
nGHgAP4n7O4oAR9Oik3zKLN095LPpMumqSMTQ8o3TpKzNWql2AEAscjPpRoCGdPA
94CsBVwFYBYkiWd2l5lye7WvK2tNrgI=
=pNNY
-----END PGP SIGNATURE-----
Merge tag 'input-for-v7.1-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a new charlieplex GPIO keypad driver
- an update to aw86927 driver to support 86938 chip
- an update for Chrome OS EC keyboard driver to support Fn-<key> keymap
extension
- an UAF fix in debugfs teardown in EDT touchscreen driver
- a number of conversions for input drivers to use guard() and __free()
cleanup primitives
- several drivers for bus mice (inport, logibm) and other very old
devices have been removed
- OLPC HGPK PS/2 protocol has been removed as it's been broken and
inactive for 10 something years
- dedicated kpsmoused has been removed from psmouse driver
- other assorted cleanups and fixups
* tag 'input-for-v7.1-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (101 commits)
Input: charlieplex_keypad - add GPIO charlieplex keypad
dt-bindings: input: add GPIO charlieplex keypad
dt-bindings: input: add settling-time-us common property
dt-bindings: input: add debounce-delay-ms common property
Input: imx_keypad - fix spelling mistake "Colums" -> "Columns"
Input: edt-ft5x06 - fix use-after-free in debugfs teardown
Input: ims-pcu - fix heap-buffer-overflow in ims_pcu_process_data()
Input: ct82c710 - remove driver
Input: mk712 - remove driver
Input: logibm - remove driver
Input: inport - remove driver
Input: qt1070 - inline i2c_check_functionality check
Input: qt1050 - inline i2c_check_functionality check
Input: aiptek - validate raw macro indices before updating state
Input: gf2k - skip invalid hat lookup values
Input: xpad - add RedOctane Games vendor id
Input: xpad - remove stale TODO and changelog header
Input: usbtouchscreen - refactor endpoint lookup
Input: aw86927 - add support for Awinic AW86938
dt-bindings: input: awinic,aw86927: Add Awinic AW86938
...
- Use list_add_tail_rcu() for walking eventfs children
The children link list is protected by SRCU and list walkers can walk the
list with only using SRCU. Using just list_add_tail() on weakly ordered
architectures can cause issues. Instead use list_add_tail_rcu().
- Hold eventfs_mutex and SRCU for remount walk events
The trace_apply_options() walks the tracefs_inodes where some are eventfs
inodes and eventfs_remount() is called which in turn calls
eventfs_set_attr(). This walk only holds normal RCU read locks, but the
eventfs_mutex and SRCU should be held. Add a eventfs_remount_(un)lock()
helpers to take the necessary locks before iterating the list.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaekrdRQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6ql43AP9evY7U3aOAfPV9Zz6UEZe37Px4rDf5
7R8Udq3BxI4c0AEArooS0KILZsWnGYFfgq2KbJM4Wq4j5xHcj9VBp95WvQM=
=1RCW
-----END PGP SIGNATURE-----
Merge tag 'tracefs-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracefs fixes from Steven Rostedt:
- Use list_add_tail_rcu() for walking eventfs children
The linked list of children is protected by SRCU and list walkers can
walk the list with only using SRCU. Using just list_add_tail() on
weakly ordered architectures can cause issues. Instead use
list_add_tail_rcu().
- Hold eventfs_mutex and SRCU for remount walk events
The trace_apply_options() walks the tracefs_inodes where some are
eventfs inodes and eventfs_remount() is called which in turn calls
eventfs_set_attr(). This walk only holds normal RCU read locks, but
the eventfs_mutex and SRCU should be held.
Add a eventfs_remount_(un)lock() helpers to take the necessary locks
before iterating the list.
* tag 'tracefs-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Hold eventfs_mutex and SRCU when remount walks events
eventfs: Use list_add_tail_rcu() for SRCU-protected children list
- Fix month in date timestamp used to create failure directories
On failure, a directory is created to store the logs and config file to
analyze the failure. The Perl function localtime is used to create the
data timestamp of the directory. The month passed back from that
function starts at 0 and not 1, but the timestamp used does not account
for that. Thus for April 20, 2026, the timestamp of 20260320 is used,
instead of 20260420.
- Save the logfile to the failure directory
Just the test log is saved to the directory on failure, but there's
useful information in the full logfile that can be helpful to analyzing
the failure. Save the logfile as well.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaeknTxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qm9hAP9jPNvXaCqvcGfz9QN2fEOs7sWWVOAQ
gryZ8Nyqn4CmswD/aQkYBVRSeWsvUrbw7WYrFvEOH0hUfKD6CaFLaA6EigE=
=ONM2
-----END PGP SIGNATURE-----
Merge tag 'ktest-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest
Pull ktest updates from Steven Rostedt:
- Fix month in date timestamp used to create failure directories
On failure, a directory is created to store the logs and config file
to analyze the failure. The Perl function localtime is used to create
the data timestamp of the directory. The month passed back from that
function starts at 0 and not 1, but the timestamp used does not
account for that. Thus for April 20, 2026, the timestamp of 20260320
is used, instead of 20260420.
- Save the logfile to the failure directory
Just the test log was saved to the directory on failure, but there's
useful information in the full logfile that can be helpful to
analyzing the failure. Save the logfile as well.
* tag 'ktest-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
ktest: Add logfile to failure directory
ktest: Fix the month in the name of the failure directory
- Make undefsyms_base.c into a real file
The file undefsyms_base.c is used to catch any symbols used by a remote
ring buffer that is made for use of a pKVM hypervisor. As it doesn't share
the same text as the rest of the kernel, referencing any symbols within
the kernel will make it fail to be built for the standalone hypervisor.
A file was created by the Makefile that checked for any symbols that could
cause issues. There's no reason to have this file created by the Makefile,
just create it as a normal file instead.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaekbsxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qr0MAQCHMFK56uzmMvQJg5Tfhtb+grY7ryo4
j0rjLkNQBovmxwD/XylBDkhxr8IQ72jU04e+xuXzrqoT18U7XvQEVpPgkQQ=
=dQi0
-----END PGP SIGNATURE-----
Merge tag 'trace-ring-buffer-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull ring-buffer fix from Steven Rostedt:
- Make undefsyms_base.c into a real file
The file undefsyms_base.c is used to catch any symbols used by a
remote ring buffer that is made for use of a pKVM hypervisor. As it
doesn't share the same text as the rest of the kernel, referencing
any symbols within the kernel will make it fail to be built for the
standalone hypervisor.
A file was created by the Makefile that checked for any symbols that
could cause issues. There's no reason to have this file created by
the Makefile, just create it as a normal file instead.
* tag 'trace-ring-buffer-v7.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Make undefsyms_base.c a first-class citizen
Only a very small update for kgdb this cycle: a single patch from Kexin Sun
that fixes some outdated comments.
Signed-off-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEELzVBU1D3lWq6cKzwfOMlXTn3iKEFAmno2OcACgkQfOMlXTn3
iKHVNw/+IXsSmpUTllkwlzmib+D7zYVEoyLOdoBRQyJDjjT9Qe811budkIs02sIk
NUgMBnffInU73lCw2TbRpKag9+dl8ZglKFvM3UpElFzY5ePnUc/fHeFtsXdzVjSK
PVzL3fCtN66R1MuMeCdMNjhtSVHNJCrclj0We39JRgli7kWK1zH6kY8X/j/ExBTR
9S5e3/9Yn/V9Z2Z33lwBMCKLHyd/5r0ezKbvfVGmqT/sTE/IbTcTfVMipEHGtHfA
JHs5PC+1obJ9jeq/1c1fV8tZ8kO+VjGI0yUibbWEBmPx0pVUW/FG1z+WwhlbcyOl
cyhKQ7d4h4e718M+bWAXeoRGk9bXyAWHqWojM98Xh+TvR2H20qAzUC44qeT9tt7B
SOfvZM4Xwsn+uYqmthtMqLMqe8VIX2WbUVjsntYZ46fRTq8RAUY3z7yLv6bm7N4l
p4i7/cdCsbzi+tN6uaKANywvt9ygEAcPILGfMhfIS4Pa7aQ/JVjKgxKhP1bUuH9u
ftqIcJwvX3d8MDQY4FsLpsRToj3rADfr35HnQCc7fmqRIFi7++fXzPerktdF/5Sd
6NMR0+mdFewdW9JfYKGZMTybf9XXyC+F6HlKgNOBddPje7qQlLUIQBajn71W753i
TNKI5Go6idMgWEukNVXGD2XqObyKD2eBgCj/42Kc8bDfo7D66UA=
=MegD
-----END PGP SIGNATURE-----
Merge tag 'kgdb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb update from Daniel Thompson:
"Only a very small update for kgdb this cycle: a single patch from
Kexin Sun that fixes some outdated comments"
* tag 'kgdb-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kgdb: update outdated references to kgdb_wait()
uprobe_multi usage message not in sync with the list of subtests it
actually supports.
Add the missing subtests in the help message.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/bpf/20260421-uprobe_multi_usage-v1-1-4c51675955e6@bootlin.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
If a typedef is defined both in a base and in a split BTF, after
deduplication a single instance should be found in the base BTF.
Suggested-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260417083319.32716-2-atenart@kernel.org
When deduplicating definitions for a module, typedef defined in the base
are not removed. This is because the hash used for base types differs
from the one used in the deduplication logic in btf_dedup_struct_type.
This was introduced by the referenced commit when moving the typedef
deduplication logic handling from btf_dedup_ref_type to
btf_dedup_struct_type, as this also changed the hash logic
(btf_hash_common to btf_hash_typedef).
This also impacts other types referencing those typedef (e.g. const). In
my test, the BTF section size of the openvswitch module went from 31KB
to 45KB.
Fixes: 3781413465 ("libbpf: Fix BTF dedup to support recursive typedef definitions").
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/bpf/20260417083319.32716-1-atenart@kernel.org
The file_reader/on_open_expect_fault fails consistently on my system.
It expects a page fault on first dynptr read of some range the exe
file of the current process because it has paged out that page range
earlier. However a lot can happen to that range (which depending on
the actual memory layout could contain text section, data section,
sections )related to dynamic linking...) between the moment it was
paged out and the moment the bpf program expected to hit a pagefault
actually run.
A bit of instrumentation with mincore() shows that pages from that
range were accessed several times before the program is run. In
particular the call of file_reader__load() seems to fault all the
range in.
Move the call to madvise(MADV_PAGEOUT) to just before attaching the
program to minimize the risk of having those page pulled back in from
under our feet.
Signed-off-by: Jerome Marchand <jmarchan@redhat.com>
Acked-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20260420134637.2513867-1-jmarchan@redhat.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
In xe_devcoredump_snapshot_free(), ss->gt may be NULL when the snapshot
was never fully populated (e.g., when cleanup is triggered without a
prior capture). Guard the xe_guc_capture_put_matched_nodes() call with
IS_ERR_OR_NULL() to prevent a null dereference.
In xe_devcoredump_free(), the deferred work is only queued when a
coredump is captured, so guard cancel_work_sync() with a check on
coredump->captured.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patch.msgid.link/20260326181017.2060209-1-zhanjun.dong@intel.com
Mykyta Yatsenko says:
====================
bpf: Add support for sleepable tracepoint programs
This series adds support for sleepable BPF programs attached to raw
tracepoints (tp_btf, raw_tp) and classic tracepoints (tp).
The motivation is to allow BPF programs on syscall
tracepoints to use sleepable helpers such as bpf_copy_from_user(),
enabling reliable user memory reads that can page-fault.
This series removes restriction for faultable tracepoints:
Patch 1 modifies __bpf_trace_run() to support sleepable programs.
Patch 2 introduces bpf_prog_run_array_sleepable() to support new usecase.
Patch 3 adds sleepable support for classic tracepoints
(BPF_PROG_TYPE_TRACEPOINT) by introducing trace_call_bpf_faultable()
and restructuring perf_syscall_enter/exit() to run BPF programs in
faultable context.
Patch 4 allows BPF_TRACE_RAW_TP, BPF_PROG_TYPE_RAW_TRACEPOINT, and
BPF_PROG_TYPE_TRACEPOINT programs to be loaded as sleepable, with
load-time and attach-time checks to reject sleepable programs on
non-faultable tracepoints.
Patch 5 adds libbpf SEC_DEF handlers: tp_btf.s, raw_tp.s,
raw_tracepoint.s, tp.s, and tracepoint.s.
Patch 6 adds selftests covering tp_btf.s, raw_tp.s, and tp.s positive
cases using bpf_copy_from_user() plus negative tests for non-faultable
tracepoints.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
---
Changes in v13:
- Invert if (prog->sleepable) check in bpf_prog_run_array_sleepable()
- Link to v12: https://patch.msgid.link/20260422-sleepable_tracepoints-v12-0-744bf0e3b311@meta.com
Changes in v12:
- Style improvement in the bpf_prog_run_array_sleepable(): use guard(rcu)(), remove
unnecessary defensive programming artifacts.
- Link to v11: https://patch.msgid.link/20260421-sleepable_tracepoints-v11-0-d8ff138d6f05@meta.com
Changes in v11:
- Avoid running dummy prog in the bpf_prog_run_array_sleepable()
- Migrate selftests from nanosleep() to getcwd() to avoid issues with the
different struct layouts.
- Link to v10: https://patch.msgid.link/20260415-sleepable_tracepoints-v10-0-161f40b33dd7@meta.com
Changes in v10:
- Guard per-prog recursion check in bpf_prog_run_array_sleepable()
with prog->active NULL check, following the same pattern as
commit 7dc211c115 for prog->stats. dummy_bpf_prog has NULL
active field and can appear in the array via
bpf_prog_array_delete_safe() fallback on allocation failure.
- Link to v9: https://patch.msgid.link/20260410-sleepable_tracepoints-v9-0-e719e664e84c@meta.com
Changes in v9:
- Fixed "classic raw tracepoints" to "raw tracepoints (tp_btf, raw_tp)"
in commit message
- Added bpf_prog_get_recursion_context() guard to
__bpf_prog_test_run_raw_tp() to protect per-CPU private stack from
concurrent sleepable test runs
- Added new bpf_prog_run_array_sleepable() without is_uprobe parameter,
remove all changes in bpf_prog_run_array_uprobe()
- Refactored attach_tp() to use prefix array uniformly (matching
attach_raw_tp() pattern), removing hardcoded strcmp() bare-name checks.
- Recursion check in __bpf_prog_test_run_raw_tp()
- Refactored selftests
- Link to v8: https://patch.msgid.link/20260330-sleepable_tracepoints-v8-0-2e323467f3a0@meta.com
Changes in v8:
- Fix sleepable tracepoint support in bpf_prog_test_run() (Kumar, sashiko)
- Link to v7: https://patch.msgid.link/20260325-sleepable_tracepoints-v6-0-2b182dacea13@meta.com
Changes in v7:
- Add recursion check (bpf_prog_get_recursion_context()) to make sure
private stack is safe when sleepable program is preempted by itself
(Alexei, Kumar)
- Use combined rcu_read_lock_dont_migrate() instead of separate
rcu_read_lock()/migrate_disable() calls for non-sleepable path (Alexei)
- Link to v6: https://lore.kernel.org/bpf/20260324-sleepable_tracepoints-v6-0-81bab3a43f25@meta.com/
Changes in v6:
- Remove recursion check from trace_call_bpf_faultable(), sleepable
tracepoints are called from syscall enter/exit, no recursion is
possible.(Kumar)
- Refactor bpf_prog_run_array_uprobe() to support tracepoints
usecase cleanly (Kumar)
- Link to v5: https://lore.kernel.org/r/20260316-sleepable_tracepoints-v5-0-85525de71d25@meta.com
Changes in v5:
- Addressed AI review: zero initialize struct pt_regs in
perf_call_bpf_enter(); changed handling tp.s and tracepoint.s in
attach_tp() in libbpf.
- Updated commit messages
- Link to v4: https://lore.kernel.org/r/20260313-sleepable_tracepoints-v4-0-debc688a66b3@meta.com
Changes in v4:
- Follow uprobe_prog_run() pattern with explicit rcu_read_lock_trace()
instead of relying on outer rcu_tasks_trace lock
- Add sleepable support for classic raw tracepoints (raw_tp.s)
- Add sleepable support for classic tracepoints (tp.s) with new
trace_call_bpf_faultable() and restructured perf_syscall_enter/exit()
- Add raw_tp.s, raw_tracepoint.s, tp.s, tracepoint.s SEC_DEF handlers
- Replace growing type enumeration in error message with generic
"program of this type cannot be sleepable"
- Use PT_REGS_PARM1_SYSCALL (non-CO-RE) in BTF test
- Add classic raw_tp and classic tracepoint sleepable tests
- Link to v3: https://lore.kernel.org/r/20260311-sleepable_tracepoints-v3-0-3e9bbde5bd22@meta.com
Changes in v3:
- Moved faultable tracepoint check from attach time to load time in
bpf_check_attach_target(), providing a clear verifier error message
- Folded preempt_disable removal into the sleepable execution path
patch
- Used RUN_TESTS() with __failure/__msg for negative test case instead
of explicit userspace program
- Reduced series from 6 patches to 4
- Link to v2: https://lore.kernel.org/r/20260225-sleepable_tracepoints-v2-0-0330dafd650f@meta.com
Changes in v2:
- Address AI review points - modified the order of the patches
- Link to v1: https://lore.kernel.org/bpf/20260218-sleepable_tracepoints-v1-0-ec2705497208@meta.com/
---
====================
Link: https://patch.msgid.link/20260422-sleepable_tracepoints-v13-0-99005dff21ef@meta.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Cover all three sleepable tracepoint types (tp_btf.s, raw_tp.s, tp.s)
and sys_exit (via bpf_task_pt_regs) with functional tests using
bpf_copy_from_user() on getcwd. Verify alias and bare SEC variants,
bpf_prog_test_run_raw_tp() with BPF_F_TEST_RUN_ON_CPU rejection,
attach-time rejection on non-faultable tracepoints, and load-time
rejection for sleepable tp_btf on non-faultable tracepoints.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20260422-sleepable_tracepoints-v13-6-99005dff21ef@meta.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Allow BPF_PROG_TYPE_RAW_TRACEPOINT, BPF_PROG_TYPE_TRACEPOINT, and
BPF_TRACE_RAW_TP (tp_btf) programs to be sleepable by adding them
to can_be_sleepable().
For BTF-based raw tracepoints (tp_btf), add a load-time check in
bpf_check_attach_target() that rejects sleepable programs attaching
to non-faultable tracepoints with a descriptive error message.
For raw tracepoints (raw_tp), add an attach-time check in
bpf_raw_tp_link_attach() that rejects sleepable programs on
non-faultable tracepoints. The attach-time check is needed because
the tracepoint name is not known at load time for raw_tp.
The attach-time check for classic tracepoints (tp) in
__perf_event_set_bpf_prog() was added in the previous patch.
Replace the verbose error message that enumerates allowed program
types with a generic "Program of this type cannot be sleepable"
message, since the list of sleepable-capable types keeps growing.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20260422-sleepable_tracepoints-v13-4-99005dff21ef@meta.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Add trace_call_bpf_faultable(), a variant of trace_call_bpf() for
faultable tracepoints that supports sleepable BPF programs. It uses
rcu_tasks_trace for lifetime protection and
bpf_prog_run_array_sleepable() for per-program RCU flavor selection,
following the uprobe_prog_run() pattern.
Restructure perf_syscall_enter() and perf_syscall_exit() to run BPF
programs before perf event processing. Previously, BPF ran after the
per-cpu perf trace buffer was allocated under preempt_disable,
requiring cleanup via perf_swevent_put_recursion_context() on filter.
Now BPF runs in faultable context before preempt_disable, reading
syscall arguments from local variables instead of the per-cpu trace
record, removing the dependency on buffer allocation. This allows
sleepable BPF programs to execute and avoids unnecessary buffer
allocation when BPF filters the event. The perf event submission
path (buffer allocation, fill, submit) remains under preempt_disable
as before. Since BPF no longer runs within the buffer allocation
context, the fake_regs output parameter to perf_trace_buf_alloc()
is no longer needed and is replaced with NULL.
Add an attach-time check in __perf_event_set_bpf_prog() to reject
sleepable BPF_PROG_TYPE_TRACEPOINT programs on non-syscall
tracepoints, since only syscall tracepoints run in faultable context.
This prepares the classic tracepoint runtime and attach paths for
sleepable programs. The verifier changes to allow loading sleepable
BPF_PROG_TYPE_TRACEPOINT programs are in a subsequent patch.
To: Peter Zijlstra <peterz@infradead.org>
To: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com> # for BPF bits
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Link: https://lore.kernel.org/bpf/20260422-sleepable_tracepoints-v13-3-99005dff21ef@meta.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Add bpf_prog_run_array_sleepable() for running BPF program arrays
on faultable tracepoints. Unlike bpf_prog_run_array_uprobe(), it
includes per-program recursion checking for private stack safety
and hardcodes is_uprobe to false.
Skip dummy_bpf_prog at the top of the loop. When
bpf_prog_array_delete_safe() replaces a detached program with
dummy_bpf_prog on allocation failure, the dummy is statically
allocated and has NULL active, stats, and aux fields. Identify
it by prog->len == 0, since every real program has at least one
instruction.
Keep bpf_prog_run_array_uprobe() unchanged for uprobe callers.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20260422-sleepable_tracepoints-v13-2-99005dff21ef@meta.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Rework __bpf_trace_run() to support sleepable BPF programs by using
explicit RCU flavor selection, following the uprobe_prog_run() pattern.
For sleepable programs, use rcu_read_lock_tasks_trace() for lifetime
protection with migrate_disable(). For non-sleepable programs, use the
regular rcu_read_lock_dont_migrate().
Remove the preempt_disable_notrace/preempt_enable_notrace pair from
the faultable tracepoint BPF probe wrapper in bpf_probe.h, since
migration protection and RCU locking are now handled per-program
inside __bpf_trace_run().
Adapt bpf_prog_test_run_raw_tp() for sleepable programs: reject
BPF_F_TEST_RUN_ON_CPU since sleepable programs cannot run in hardirq
or preempt-disabled context, and call __bpf_prog_test_run_raw_tp()
directly instead of via smp_call_function_single(). Rework
__bpf_prog_test_run_raw_tp() to select RCU flavor per-program and
add per-program recursion context guard for private stack safety.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20260422-sleepable_tracepoints-v13-1-99005dff21ef@meta.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
TAS5832 is in same family with TAS5827/28/30.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260414015441.2439-1-baojun.xu@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The NVMe Base Specification 8.3.5.5.9 states that the session key Ks
shall be computed from the ephemeral DH key by applying the hash
function selected by the HashID parameter.
The current implementation stores the raw DH shared secret as the
session key without hashing it. This causes redundant hash operations:
1. Augmented challenge computation (section 8.3.5.5.4) requires
Ca = HMAC(H(g^xy mod p), C). The code compensates by hashing the
unhashed session key in nvme_auth_augmented_challenge() to produce
the correct result.
2. PSK generation (section 8.3.5.5.9) requires PSK = HMAC(Ks, C1 || C2)
where Ks should already be H(g^xy mod p). As the DH shared secret
is always larger than the HMAC block size, HMAC internally hashes
it before use, accidentally producing the correct result.
When using secure channel concatenation with bidirectional
authentication, this results in hashing the DH value three times: twice
for augmented challenge calculations and once during PSK generation.
Fix this by:
- Modifying nvme_auth_gen_shared_secret() to hash the DH shared secret
once after computation: Ks = H(g^xy mod p)
- Removing the hash operation from nvme_auth_augmented_challenge()
as the session key is now already hashed
- Updating session key buffer size from DH key size to hash output size
- Adding specification references in comments
This avoid storing the raw DH shared secret and reduces the number of
hash operations from three to one when using secure channel
concatenation.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Add a bpf_tcp_ca selftest for the TCP_NODELAY restriction in
bpf-tcp-cc.
Update bpf_cubic to exercise init() and cwnd_event_tx_start(),
and check that both callbacks reject bpf_setsockopt(TCP_NODELAY)
with -EOPNOTSUPP.
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260421155804.135786-5-kafai.wan@linux.dev
Add a sockops selftest for the TCP_NODELAY restriction in
BPF_SOCK_OPS_HDR_OPT_LEN_CB and BPF_SOCK_OPS_WRITE_HDR_OPT_CB.
With BPF_SOCK_OPS_WRITE_HDR_OPT_CB_FLAG enabled,
bpf_setsockopt(TCP_NODELAY) returns -EOPNOTSUPP from
BPF_SOCK_OPS_HDR_OPT_LEN_CB and BPF_SOCK_OPS_WRITE_HDR_OPT_CB, avoiding
unbounded recursion and kernel stack overflow.
Other cases continue to work as before, including
BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB.
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://patch.msgid.link/20260421155804.135786-4-kafai.wan@linux.dev
A BPF TCP congestion control program can call bpf_setsockopt() from
its callbacks. In current kernels, if it calls
bpf_setsockopt(TCP_NODELAY) from cwnd_event_tx_start(), the call can
re-enter the TCP transmit path before the outer tcp_transmit_skb()
has completed and advanced the send head.
This can re-trigger CA_EVENT_TX_START and lead to unbounded recursion:
tcp_transmit_skb()
-> tcp_event_data_sent()
-> tcp_ca_event(sk, CA_EVENT_TX_START)
-> cwnd_event_tx_start()
-> bpf_setsockopt(TCP_NODELAY)
-> tcp_push_pending_frames()
-> tcp_write_xmit()
-> tcp_transmit_skb()
This leads to unbounded recursion and can overflow the kernel stack.
Reject TCP_NODELAY with -EOPNOTSUPP for bpf-tcp-cc by introducing
a dedicated setsockopt proto for BPF_PROG_TYPE_STRUCT_OPS TCP
congestion control programs. To keep it simple, all tcp-cc ops is
rejected for TCP_NODELAY.
Fixes: 7e41df5dbb ("bpf: Add a few optnames to bpf_setsockopt")
Suggested-by: Martin KaFai Lau <martin.lau@linux.dev>
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://patch.msgid.link/20260421155804.135786-3-kafai.wan@linux.dev
A BPF_SOCK_OPS program can enable
BPF_SOCK_OPS_WRITE_HDR_OPT_CB_FLAG and then call
bpf_setsockopt(TCP_NODELAY) from BPF_SOCK_OPS_HDR_OPT_LEN_CB or
BPF_SOCK_OPS_WRITE_HDR_OPT_CB.
In these callbacks, bpf_setsockopt(TCP_NODELAY) can reach
__tcp_sock_set_nodelay(), which can call tcp_push_pending_frames().
>From BPF_SOCK_OPS_HDR_OPT_LEN_CB, tcp_push_pending_frames() can call
tcp_current_mss(), which calls tcp_established_options() and re-enters
bpf_skops_hdr_opt_len().
BPF_SOCK_OPS_HDR_OPT_LEN_CB
-> bpf_setsockopt(TCP_NODELAY)
-> tcp_push_pending_frames()
-> tcp_current_mss()
-> tcp_established_options()
-> bpf_skops_hdr_opt_len()
-> BPF_SOCK_OPS_HDR_OPT_LEN_CB
>From BPF_SOCK_OPS_WRITE_HDR_OPT_CB, tcp_push_pending_frames() can call
tcp_write_xmit(), which calls tcp_transmit_skb(). That path recomputes
header option length through tcp_established_options() and
bpf_skops_hdr_opt_len() before re-entering bpf_skops_write_hdr_opt().
BPF_SOCK_OPS_WRITE_HDR_OPT_CB
-> bpf_setsockopt(TCP_NODELAY)
-> tcp_push_pending_frames()
-> tcp_write_xmit()
-> tcp_transmit_skb()
-> tcp_established_options()
-> bpf_skops_hdr_opt_len()
-> bpf_skops_write_hdr_opt()
-> BPF_SOCK_OPS_WRITE_HDR_OPT_CB
This leads to unbounded recursion and can overflow the kernel stack.
Reject TCP_NODELAY with -EOPNOTSUPP in bpf_sock_ops_setsockopt()
when bpf_setsockopt() is called from
BPF_SOCK_OPS_HDR_OPT_LEN_CB or BPF_SOCK_OPS_WRITE_HDR_OPT_CB.
Fixes: 7e41df5dbb ("bpf: Add a few optnames to bpf_setsockopt")
Closes: https://lore.kernel.org/bpf/d1d523c9-6901-4454-a183-94462b8f3e4e@std.uestc.edu.cn/
Reported-by: Quan Sun <2022090917019@std.uestc.edu.cn>
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Link: https://patch.msgid.link/20260421155804.135786-2-kafai.wan@linux.dev
Describe Waveshare 7" DSI panel which uses ILI9881 as a panel
controller. This panel requires two voltags supplies, so add separate
iovcc supply.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260418-waveshare-dsi-touch-v4-1-b249f3e702bd@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
LVDS transmitter used in the Microsoft Surface RT.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260417064953.20511-2-clamor95@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
- Add support for CONFIG_PAGE_TABLE_CHECK and enable it in
debug_defconfig. s390 can only tell user from kernel PTEs via the mm,
so mm_struct is now passed into pxx_user_accessible_page() callbacks
- Expose the PCI function UID as an arch-specific slot attribute in
sysfs so a function can be identified by its user-defined id while
still in standby. Introduces a generic ARCH_PCI_SLOT_GROUPS hook in
drivers/pci/slot.c
- Refresh s390 PCI documentation to reflect current behavior and cover
previously undocumented sysfs attributes
- zcrypt device driver cleanup series: consistent field types, clearer
variable naming, a kernel-doc warning fix, and a comment explaining
the intentional synchronize_rcu() in pkey_handler_register()
- Provide an s390 arch_raw_cpu_ptr() that avoids the detour via
get_lowcore() using alternatives, shrinking defconfig by ~27 kB
- Guard identity-base randomization with kaslr_enabled() so nokaslr
keeps the identity mapping at 0 even with
CONFIG_RANDOMIZE_IDENTITY_BASE=y
- Build S390_MODULES_SANITY_TEST as a module only by requiring
KUNIT && m, since built-in would not exercise module loading
- Remove the permanently commented-out HMCDRV_DEV_CLASS create_class()
code in the hmcdrv driver
- Drop stale ident_map_size extern conflicting with asm/page.h
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmno78kACgkQjYWKoQLX
FBiHbggAmW5hPIDf4F8HLomMREaaQb7QAyYwfeefwhcFUXSMu8td8S68aN4UkOnS
DGSFjb+V6Nqd+ewrF7IS9pRU9YFsmBqo3MnLdcJ/ojZFz8BlwoAi+E4AD1a38hY2
9zh2siPBMjydqBRUn6zjsK8auk4e8r44iS5MNNMXDF2ePE/PnPKTm93GhbtnnM6r
a7mQkiPbi6j0sN/UU+pQkhS4fm2XNaGpCGGX0W0v2RdLIYZ9zQQdg4TaEsjQ5wZA
OC3P8LG3OyJjnxsY2J8PIKK0VM0JP67KUGnQOi1y8HbN1LkFfAWF6CK7tsyUE/JM
TYg7ENs2mUMmaa8niOGkiXzjjAxD0g==
=NpmP
-----END PGP SIGNATURE-----
Merge tag 's390-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
- Add support for CONFIG_PAGE_TABLE_CHECK and enable it in
debug_defconfig. s390 can only tell user from kernel PTEs via the mm,
so mm_struct is now passed into pxx_user_accessible_page() callbacks
- Expose the PCI function UID as an arch-specific slot attribute in
sysfs so a function can be identified by its user-defined id while
still in standby. Introduces a generic ARCH_PCI_SLOT_GROUPS hook in
drivers/pci/slot.c
- Refresh s390 PCI documentation to reflect current behavior and cover
previously undocumented sysfs attributes
- zcrypt device driver cleanup series: consistent field types, clearer
variable naming, a kernel-doc warning fix, and a comment explaining
the intentional synchronize_rcu() in pkey_handler_register()
- Provide an s390 arch_raw_cpu_ptr() that avoids the detour via
get_lowcore() using alternatives, shrinking defconfig by ~27 kB
- Guard identity-base randomization with kaslr_enabled() so nokaslr
keeps the identity mapping at 0 even with RANDOMIZE_IDENTITY_BASE=y
- Build S390_MODULES_SANITY_TEST as a module only by requiring KUNIT &&
m, since built-in would not exercise module loading
- Remove the permanently commented-out HMCDRV_DEV_CLASS create_class()
code in the hmcdrv driver
- Drop stale ident_map_size extern conflicting with asm/page.h
* tag 's390-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: Fix warning about wrong kernel doc comment
PCI: s390: Expose the UID as an arch specific PCI slot attribute
docs: s390/pci: Improve and update PCI documentation
s390/pkey: Add comment about synchronize_rcu() to pkey base
s390/hmcdrv: Remove commented out code
s390/zcrypt: Slight rework on the agent_id field
s390/zcrypt: Explicitly use a card variable in _zcrypt_send_cprb
s390/zcrypt: Rework MKVP fields and handling
s390/zcrypt: Make apfs a real unsigned int field
s390/zcrypt: Rework domain processing within zcrypt device driver
s390/zcrypt: Move inline function rng_type6cprb_msgx from header to code
s390/percpu: Provide arch_raw_cpu_ptr()
s390: Enable page table check for debug_defconfig
s390/pgtable: Add s390 support for page table check
s390/pgtable: Use set_pmd_bit() to invalidate PMD entry
mm/page_table_check: Pass mm_struct to pxx_user_accessible_page()
s390/boot: Respect kaslr_enabled() for identity randomization
s390/Kconfig: Make modules sanity test a module-only option
s390/setup: Drop stale ident_map_size declaration
Replace sprintf() with sysfs_emit() in param_get_audit() and
param_get_mode(). sysfs_emit() is preferred for formatting sysfs output
because it provides safer bounds checking. Add terminating newlines as
suggested by checkpatch.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Remove the redundant if check in sk_peer_get_label() and return
ERR_PTR(-ENOPROTOOPT) directly.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Use kmemdup_nul() to copy 'value' instead of using memcpy() followed by
a manual NUL termination. No functional changes.
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: John Johansen <john.johansen@canonical.com>
We can batch admin commands submitted through io_uring_cmd passthrough,
which means bd->last may be false and skips the doorbell write to
aggregate multiple commands per write. If a subsequent command can't be
dispatched for whatever reason, we have to provide the blk-mq ops'
commit_rqs callback in order to ensure we properly update the doorbell.
Fixes: 58e5bdeb9c ("nvme: enable uring-passthrough for admin commands")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Section 8.3.4.5.5 of the NVMe Base Specification 2.1 describes what is
included in the Response Value (RVAL) hash and SC_C should be included.
Currently we are hardcoding 0 instead of using the correct SC_C value.
Update the host and target code to use the SC_C when calculating the
RVAL instead of using 0.
Fixes: e88a7595b5 ("nvme-tcp: request secure channel concatenation")
Reviewed-by: Chris Leech <cleech@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Curently after the host sends a REPLACETLSPSK we free the TLS keys as
part of calling nvmet_auth_sq_free() on success. This means when the
host sends a follow up REPLACETLSPSK we return CONCAT_MISMATCH as the
check for !nvmet_queue_tls_keyid(req->sq) fails.
A previous attempt to fix this involed not calling nvmet_auth_sq_free()
on successful connections, but that results in memory leaks. Instead we
should not clear `tls_key` in nvmet_auth_sq_free(), as that was
incorrectly wiping the tls keys which are used for the session.
This patch ensures we correctly free the ephemeral session key on
connection, yet we don't free the TLS key unless closing the connection.
Reviewed-by: Chris Leech <cleech@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
In an attempt to fix REPLACETLSPSK we stopped freeing the secrets on
successful connections. This resulted in memory leaks in the kernel, so
let's revert the commit. A improved fix is being developed to just avoid
clearing the tls_key variable.
This reverts commit 2e6eb6b277.
Closes: https://lore.kernel.org/linux-nvme/CAHj4cs-u3MWQR4idywptMfjEYi4YwObWFx4KVib35dZ5HMBDdw@mail.gmail.com
Reviewed-by: Chris Leech <cleech@redhat.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The command was never dispatched for the driver's "host path error", so
the command was never actually initialized and there's no corresponding
submit trace for the completion.
Reported-by: Minsik Jeon <hmi.jeon@samsung.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEIbPD0id6easf0xsudhRwX5BBoF4FAmnobFATHHdlaS5saXVA
a2VybmVsLm9yZwAKCRB2FHBfkEGgXhafB/wMvf8yu4FgapbSRIlPboeW/ONDyuHd
k0y1a0IFMQLspWfCxK8+snEcHT3g9xzG3ksqcnac0SPgzqxQ4dlK/c7Xr+5EBXuf
TEt/bHrt6KT5BUpb1k/XxcdoObCsvZd3vfqR020OsHijw1Ni9PrdqeZxk56/vFJs
nvgyKvsrAEyfALOH1Vgwg0gNWpqJBj1KcT3Kl1o4p5lwQzVpUREZii6RyvgXT/pu
mckN63FrEPOpDaJllHmCPcfFSzqNi+wFQcFxm35w9rDQsVdnMsRWoJbcXNYW5QGM
+KOZ1/tzw4Z3queW78hcxsH6sXiElLDsJgtDohBhxbVvUXy+xHrJCOm5
=4Ke3
-----END PGP SIGNATURE-----
Merge tag 'hyperv-next-signed-20260421' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V updates from Wei Liu:
- Fix cross-compilation for hv tools (Aditya Garg)
- Fix vmemmap_shift exceeding MAX_FOLIO_ORDER in mshv_vtl (Naman Jain)
- Limit channel interrupt scan to relid high water mark (Michael
Kelley)
- Export hv_vmbus_exists() and use it in pci-hyperv (Dexuan Cui)
- Fix cleanup and shutdown issues for MSHV (Jork Loeser)
- Introduce more tracing support for MSHV (Stanislav Kinsburskii)
* tag 'hyperv-next-signed-20260421' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
x86/hyperv: Skip LP/VP creation on kexec
x86/hyperv: move stimer cleanup to hv_machine_shutdown()
Drivers: hv: vmbus: fix hyperv_cpuhp_online variable shadowing
mshv: Add tracepoint for GPA intercept handling
mshv_vtl: Fix vmemmap_shift exceeding MAX_FOLIO_ORDER
tools: hv: Fix cross-compilation
Drivers: hv: vmbus: Export hv_vmbus_exists() and use it in pci-hyperv
mshv: Introduce tracing support
Drivers: hv: vmbus: Limit channel interrupt scan to relid high water mark
snd_microii_spdif_switch_put() returns 0 when the requested
vendor register value differs from the cached one.
This comparison was inverted by the resume-support conversion,
so real SPDIF switch toggles are ignored while no-op writes still
issue SET_CUR and report success.
Return early only when the requested value matches the cached one.
Fixes: 288673beae ("ALSA: usb-audio: Add resume support for MicroII SPDIF ctls")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260421-microii-spdif-switch-fix-v1-1-5c50dc28b88f@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_emuusb_set_samplerate() unconditionally notifies the E-MU
SampleRate Extension Unit control after issuing SET_CUR.
If snd_usb_mixer_set_ctl_value() fails, the control value has not
changed, yet snd_usb_mixer_notify_id() still invalidates the cache and
emits a value-change event to userspace.
Notify the control only after a successful write.
Fixes: 7d2b451e65 ("ALSA: usb-audio - Added functionality for E-mu 0404USB/0202USB/TrackerPre")
Cc: stable@vger.kernel.org
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260421-alsa-emuusb-samplerate-notify-v1-1-8b63bbc1d7f1@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add more trace coverage to amdxdna job handling and mailbox receive
processing to make driver execution easier to debug.
Extend the xdna_job trace event to record the command opcode in
addition to the job sequence number. Use the enhanced tracepoint in
the job run, sent-to-device, signaled-fence, and job-free paths so
that trace output can be correlated with the command being executed.
Also add debug-point tracing when a command is received through the
submit ioctl path, and add a trace event when the mailbox RX worker
runs.
These changes improve visibility into job lifetime transitions and
mailbox activity, which helps debug command flow and scheduler issues.
Signed-off-by: Max Zhen <max.zhen@amd.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260421181502.1970263-1-lizhi.hou@amd.com
