Ring resizing copies pending SQEs from the old SQE array into the new
one so submissions queued before the resize can still be consumed
afterwards.
That copy currently walks the SQ head/tail range directly. This is only
correct when there is no SQ array indirection. With a regular SQ array,
each pending SQ entry contains an index into the SQE array. After resize,
ctx->sq_array is repointed at the newly allocated array, so pending
entries lose their old logical-to-physical mapping and may submit the
wrong SQE.
Remember the old and new SQ arrays while migrating pending SQ entries. For
each pending entry, copy the SQE selected by the old array into the new
destination slot and rebuild the new array entry to point at the copied
SQE. Keep invalid user-provided entries invalid so the normal submission
path still drops them after resize.
Fixes: 79cfe9e59c ("io_uring/register: add IORING_REGISTER_RESIZE_RINGS")
Signed-off-by: guzebing <guzebing1612@gmail.com>
Link: https://patch.msgid.link/20260608133316.3656440-1-guzebing1612@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The patch removes the automatic plug/unplug operations from __submit_bio()
that were added to cache nsecs time when no explicit plug is used.
The plug mechanism is most effective when batching multiple I/O
operations together. Creating a plug for every bio submission
provides minimal benefit while adding function call overhead and
stack usage for every I/O operation.
Below is performance comparison with the latest upstream kernel.
Iotype qd nj rmix mpstat busy mpstat busy without plug
Randrw 1 20 100 53% 24%
Randrw 1 40 100 70% 24%
Randrw 1 20 70 40% 24%
Randrw 1 40 70 60% 26%
Randrw 1 20 0 14% 6%
Randrw 1 40 0 20% 7%
Fixes: 060406c61c ("block: add plug while submitting IO")
Signed-off-by: Wen Xiong <wenxiong@linux.ibm.com>
Reviewed-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260616143121.878021-1-wenxiong@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
blkdev_uring_cmd() checks IORING_URING_CMD_REISSUE to determine whether
this is the first issue. However, this flag lives in cmd->flags instead
of issue_flags.
Coincidentally, IO_URING_F_NONBLOCK shares bit 31 with
IORING_URING_CMD_REISSUE. As a result, the SQE read was never performed,
bic->len remained zero, and every BLOCK_URING_CMD_DISCARD failed with
-EINVAL.
Fix it by checking cmd->flags as intended.
Cc: stable@vger.kernel.org
Fixes: 212ec34e4e ("block: only read from sqe on initial invocation of blkdev_uring_cmd")
Signed-off-by: Yitang Yang <yi1tang.yang@gmail.com>
Link: https://patch.msgid.link/20260616155129.406057-1-yi1tang.yang@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Jakub Kicinski says:
====================
tls: reject the combination of TLS and sockmap
There are no known TLS+sockmap users and it has some known
hard to solve bugs. Let's reject this configuration as we
discussed a number of times.
====================
Link: https://patch.msgid.link/20260614014102.461064-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TLS and sockmap are mutually exclusive. We already have a test
for the sockmap side rejecting kTLS, add the inverse test matching
patch 1 of this series.
Link: https://patch.msgid.link/20260614014102.461064-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With the sockmap + kTLS tests gone, the BPF-side support in test_sockmap
is dead: the tls_sock_map map and bpf_prog3 (which redirected skbs into
it) are no longer referenced. Remove them, along with the now-unused
bpf_write_pass() helper.
bpf_prog3 was progs[2], so renumber the progs[] users in test_sockmap.c:
the sockops program drops to progs[2] and the sk_msg tx programs to
progs[3..7]. Shrink the map/prog arrays from 9 to 8 and drop the
tls_sock_map entry (the last one) from map_names[] to match.
Link: https://patch.msgid.link/20260614014102.461064-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The combination of sockmap and TLS is no longer supported - installing
the TLS ULP on a sockmap socket (and vice versa) is now rejected. Remove
the tests that exercise the combination along with their BPF program;
the file covered nothing but sockmap sockets holding kTLS contexts.
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://patch.msgid.link/20260614014102.461064-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TLS and sockmap are now mutually exclusive. Try to delete the code
from sendmsg and recvmsg path which is now obviously dead.
The main goal is to delete enough code for AI security scanners
to no longer bother us with sockmap related bugs. At the same
time retain the code in case someone has the cycles to fix
all of this and make the integration work, again.
If the integration does not get restored we can wipe the rest
of the skmsg code from TLS in two or three releases.
The changes on the Tx side are deeper since that's where most
of the bugs are, Rx side simply takes the data from sockmap
and gives it to the user. On Tx split record handling and
rolling back the iterator were the two problem areas.
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260614014102.461064-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
TLS and sockmap (BPF psock) integration hides a lot of latent bugs.
Bugs which may be more or less relevant for real users but they
are definitely exploitable.
We could not find anyone actively using this integration so let's
reject this config. Adding a TLS socket to a sockmap was already
rejected by sk_psock_init() through the inet_csk_has_ulp() check.
We need to reject the attempts to configure the TLS keys (rather
than adding the ULP itself) because checking prior to the ULP
installation is tricky without risking a race with sockmap getting
added in parallel (sockmap does not hold the socket lock).
This patch is a minimal rejection of the feature. Subsequent patch
in the series will do a light dead code removal. Full cleanup would
require a major rewrite of the Tx path, we don't need skmsg any more.
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/20260614014102.461064-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
atm: remove more dead code
Commit 6deb535950 ("net: remove unused ATM protocols and legacy
ATM device drivers") removed a good chunk of old ATM drivers.
Our goal going forward is to limit the ATM support to PPPoATM
used in ADSL deployments.
A recent burst of AI generated fixes for net/atm/signaling.c and
net/atm/svc.c made me look closer at the remaining code. PPPoATM runs
over permanent virtual circuits (PF_ATMPVC) with a statically
configured VPI/VCI. We can drop switched virtual circuits (SVCs)
and user-space signaling (atmsigd) support. While digging around
I noticed a few more obviously dead pieces of code.
Annoyingly, I have applied one "fix" to QoS config which will
now make net conflict with this series :/
====================
Link: https://patch.msgid.link/20260615194416.752559-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ATM removals have left a number of uAPI headers and ioctl
definitions with no in-kernel implementation behind them:
- device headers for adapters deleted with the legacy PCI/SBUS drivers:
atm_eni.h, atm_he.h, atm_idt77105.h, atm_nicstar.h, atm_zatm.h and
the atmtcp pair atm_tcp.h / <linux/atm_tcp.h>
- protocol headers for the removed CLIP, LANE and MPOA stacks:
atmarp.h, atmclip.h, atmlec.h, atmmpc.h
- atmsvc.h and the SVC / p2mp / local-address ioctls in atmdev.h
(ATM_{GET,RST,ADD,DEL}ADDR, ATM_{ADD,DEL,GET}LECSADDR,
ATM_{ADD,DROP}PARTY) left behind by the SVC and address-registry
removals
None of these are referenced by any remaining in-tree code.
Let's try to delete all this. Chances are nobody cares about
these headers any more. I'm keeping this separate from the
kernel side code changes for ease of revert, in case I am
proven wrong...
Link: https://patch.msgid.link/20260615194416.752559-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The PHY operations are vestiges of the SAR/framer split used by the
removed PCI/SBUS ATM adapters:
- atmdev_ops::phy_put / ::phy_get (register accessors) are never called
by the core and solos-pci only listed them as NULL
- struct atmphy_ops and atm_dev::phy have no users at all - nothing
assigns or dereferences them
Remove all of them. atm_dev::phy_data is kept: solos-pci repurposes it
to stash its per-port channel index.
Link: https://patch.msgid.link/20260615194416.752559-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
atmdev_ops::pre_send (a TX pre-processing hook) and ::send_bh (a
bottom-half capable send variant) have no implementation behind them:
no remaining ATM driver sets either, so vcc_sendmsg() always skipped
pre_send and the raw AAL0/AAL5 paths always fell back to ->send().
The drivers that used these hooks were removed with the legacy ATM
adapters.
Drop both operations and the dead branches that tested for them.
Link: https://patch.msgid.link/20260615194416.752559-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
atmdev_ops::change_qos() was the hook for renegotiating the traffic
parameters of an already-connected VCC, driven from SO_ATMQOS on a
connected socket (and previously from the SVC as_modify path, now gone).
None of the ATM drivers left in tree implement it - solos-pci only listed
change_qos = NULL - so atm_change_qos() always returned -EOPNOTSUPP.
Drop the operation and return -EOPNOTSUPP directly.
Link: https://patch.msgid.link/20260615194416.752559-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ATM switched virtual circuits (SVCs) are set up and torn down by a
user-space signaling daemon (atmsigd) which the kernel talks to over
a dedicated "sigd" socket: the kernel marshals Q.2931-style requests
(as_connect, as_listen, as_accept, as_close, ...) to the daemon and
applies the results to PF_ATMSVC sockets. This is the machinery behind
classical SVC use and was the foundation for LANE / MPOA, all of which
have been removed.
DSL deployments do not use any of this. PPPoATM and BR2684 run over
permanent virtual circuits (PF_ATMPVC) with a statically configured
VPI/VCI; no atmsigd, no Q.2931. Neither remaining ATM driver
(solos-pci, the USB DSL modems) is reachable through the SVC path.
Remove the SVC socket family and the signaling interface:
- delete net/atm/svc.c, net/atm/signaling.c and signaling.h
- drop atmsvc_init()/atmsvc_exit() and the PF_ATMSVC registration and
module alias
- drop the ATMSIGD_CTRL ioctl (sigd_attach) and the /proc/net/atm/svc
file
- fold the SVC branch out of atm_change_qos(); all sockets are PVCs now
The obsolete ATM_SETSC ioctl stub is left in place (it already just
warns and returns 0), as is the struct atm_vcc SVC bookkeeping shared
with the queueing layer.
Link: https://patch.msgid.link/20260615194416.752559-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/atm/addr.c maintained the per-device lists of local NSAP addresses
(dev->local) and ILMI-learned LECS addresses (dev->lecs). These exist
solely to serve SVC signaling: the lists are populated through the
ATM_{ADD,DEL,RST}ADDR / ATM_{ADD,DEL,GET}LECSADDR ioctls used by the
atmsigd / ILMI daemons, and consumed when registering addresses with the
signaling daemon. The LECS list belonged to LAN Emulation, which has
been removed.
With no SVC users in a DSL-only configuration these lists are always
empty, so drop the registry entirely:
- remove the ADDR/LECSADDR/RSTADDR ioctls
- drop the now-always-empty "atmaddress" sysfs attribute
- remove the dev->local / dev->lecs lists, structs and enums
- delete net/atm/addr.c and net/atm/addr.h
The device ESI ("MAC" address) and its ATM_{G,S}ETESI ioctls and
"address" sysfs attribute are retained - the USB DSL modems populate
the ESI.
Link: https://patch.msgid.link/20260615194416.752559-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The SONET_* ioctls are SONET/SDH PHY controls that atm_dev_ioctl() and
the compat path only ever forwarded to the driver's ->ioctl() handler.
The PHY drivers that implemented them (the S/UNI library and the framers
on the removed PCI/SBUS adapters) are gone, and neither surviving driver
services them: solos-pci has no ->ioctl, and usbatm handles only
ATM_QUERYLOOP. They now uniformly return an error regardless.
Drop the SONET compat passthrough and the SONET cases in atm_dev_ioctl(),
along with the now-unused linux/sonet.h includes. The SONET_* uAPI
definitions are untouched.
Link: https://patch.msgid.link/20260615194416.752559-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The atmdev_ops::send_oam device operation and the atm_vcc::push_oam
callback were the kernel's interface for raw F4/F5 OAM cell exchange.
Nothing assigns them a non-NULL value and nothing ever invokes them:
the core only ever initialises push_oam to NULL (in vcc_create() and the
AAL init helpers) and the Solos driver only lists send_oam = NULL for
documentation. The drivers that actually drove OAM through these hooks
were removed along with the legacy ATM adapters.
Drop both callbacks and the NULL initialisers.
Link: https://patch.msgid.link/20260615194416.752559-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
AAL3/4 is an obsolete connection-oriented ATM adaptation layer that has
seen no real use since the SMDS-era hardware it was designed for (90s?).
We are only maintaining ATM support in-tree to keep PPPoATM running,
and PPPoATM runs over AAL5.
Drop the "raw" AAL3/4 transport (atm_init_aal34()) and the ATM_AAL34
cases in the connect and traffic-parameter paths. A vcc_connect() with
qos.aal == ATM_AAL34 now fails with -EPROTOTYPE.
uAPI cleanup is performed later, separately.
Link: https://patch.msgid.link/20260615194416.752559-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IORING_OP_RECV_ZC is a read operation. Audit only tracks file/socket
creation, not subsequent reads. Set audit_skip to align with
audit-userspace uringop_table.h.
Fixes: 11ed914bbf ("io_uring/zcrx: add io_recvzc request")
Suggested-by: Steve Grubb <sgrubb@redhat.com>
Signed-off-by: Ricardo Robaina <rrobaina@redhat.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://patch.msgid.link/20260616123632.3209545-1-rrobaina@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The normal task_work path used a tw_pending bit to ensure the callback
was only added once: the mpscq drains incrementally, so a single
tctx_task_work() run can take the queue through empty -> non-empty
several times, and each transition would otherwise re-add the already
pending callback_head. This corrupts the task_work list, and is what
tw_pending protects again.
This can go away, if we stop running the task_work as soon as the queue
empties.
Suggested-by: Caleb Sander Mateos <csander@purestorage.com>
Reviewed-by: Caleb Sander Mateos <csander@purestorage.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Finalize commit c33c794828 ("mm: ptep_get() conversion") and
replace direct page table entry dereferencing with the proper
accessors (ptep_get(), pmdp_get(), etc.).
Override the default getter implementations even though they are
currently identical: pud_clear(), p4d_clear(), and pgd_clear()
require corresponding architecture-specific getters, but these
are not yet defined. This avoids a dependency loop.
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The variable WQE mode must be validated against
the maximum slots supported by HW. The max supported
value is 64K. Adding a max and min check and fail if user
supplied value is more than the max supported and zero.
Fixes: d8ea645d69 ("RDMA/bnxt_re: Handle variable WQE support for user applications")
Link: https://patch.msgid.link/r/20260615224751.232802-10-selvin.xavier@broadcom.com
Reviewed-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
While dumping the info on MR using the rdma tool, we
dump the mr_hwq which is a kernel pointer. There is
no need to expose this value for end user. So avoid
it.
Fixes: 7363eb76b7 ("RDMA/bnxt_re: Support driver specific data collection using rdma tool")
Link: https://patch.msgid.link/r/20260615224751.232802-9-selvin.xavier@broadcom.com
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Free the toggle page only after firmware teardown completes so that
an NQ interrupt arriving during bnxt_qplib_destroy_cq() won't write
the toggle value to an already-freed page. Move free_page() after
bnxt_qplib_destroy_cq.
Fixes: e275919d96 ("RDMA/bnxt_re: Share a page to expose per CQ info with userspace")
Link: https://patch.msgid.link/r/20260615224751.232802-4-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Free the toggle page only after firmware teardown completes so that
an NQ interrupt arriving during bnxt_qplib_destroy_srq() won't write
the toggle values to an already-freed page. Move free_page() after
bnxt_qplib_destroy_srq().
Fixes: 181028a0d8 ("RDMA/bnxt_re: Share a page to expose per SRQ info with userspace")
Link: https://patch.msgid.link/r/20260615224751.232802-3-selvin.xavier@broadcom.com
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
dpi is initialized only for BNXT_RE_ALLOC_WC_PAGE, but copied
for all the cases. So initialize the dpi to 0.
Fixes: eee6268421 ("RDMA/bnxt_re: Move the UAPI methods to a dedicated file")
Fixes: 360da60d6c ("RDMA/bnxt_re: Enable low latency push")
Link: https://patch.msgid.link/r/20260615224751.232802-2-selvin.xavier@broadcom.com
Reviewed-by: Anantha Prabhu <anantha.prabhu@broadcom.com>
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Heiko Carstens says:
===================
This is supposed to improve s390 idle time accounting, and brings it
back to the state it was before arch_cpu_idle_time() was removed from
s390 [3].
In result all cpu time accounting is done by the s390 architecture backend
again, instead of having a mix of architecure specific and common code
accounting (common code: idle, s390 architecture: everything else).
===================
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
During regcache initialization, if an error occurs in the
cache_ops->populate callback, and if cache operations include an exit
callback, the error code from populate() is overwritten with the return
value from exit(). This hides the error condition from the caller of
regcache_init(), and can cause NULL pointer dereferences when the regcache
is later accessed.
Fixes: 94a3a95f03 ("regcache: Add ->populate() callback to separate from ->init()")
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Link: https://patch.msgid.link/20260616114429.1852456-1-flavra@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The YAML conversion added me as maintainer but I can't recall being
asked nor do I want to maintain it. Thierry has created the YAML file
and works for the company which contributed the driver.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Thierry Reding <thierry.reding@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260616060910.1480-2-wsa+renesas@sang-engineering.com
Convert Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt to
the YAML schema so the i2c-mux-reg binding is validated by
dt_binding_check. Faithful port of the existing properties; no
semantic change.
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260608-i2c-mux-reg-base-bus-num-v2-1-776e313f213a@nexthop.ai
davinci_i2c_probe() registers a cpufreq transition notifier before adding
the I2C adapter. If i2c_add_numbered_adapter() fails, the probe error path
releases the device resources without unregistering the notifier.
Add a dedicated error path to unregister the cpufreq notifier after
i2c_add_numbered_adapter() fails.
Fixes: 82c0de11b7 ("i2c: davinci: Add cpufreq support")
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Cc: <stable@vger.kernel.org> # v2.6.36+
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260610030513.2651018-1-haoxiang_li2024@163.com
In cci_probe() the controller's interrupt is requested using a devres
managed API, and in cci_probe() error path and cci_remove() it'd be
safe to rely on devres mechanism to free and shutdown the interrupt,
thus explicit disable_irq() calls can be removed as unnecessary ones.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260515234121.1607425-5-vladimir.zapolskiy@linaro.org
On probe or runtime errors cci_reset() is called and it should be coupled
with cci_init(), instead of doing this on caller's side, embed cci_init()
directly into the cci_reset() function.
This is a non-functional change, cci_reset() and cci_init() function
bodies are reordered.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260515234121.1607425-4-vladimir.zapolskiy@linaro.org
The cci_init() function is not supposed to fail, and it never returns
a non-zero, so it'd make sense to convert its signature to void.
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260515234121.1607425-3-vladimir.zapolskiy@linaro.org
- Fix discrepancy in --dump-tasks option
Due to a mistake, rtla-timerlat-hist used the CLI syntax "--dump-task"
instead of the documented "--dump-tasks". Change the option to match
both documentation and the other timerlat tool, rtla-timerlat-top.
- Extend coverage of runtime tests
Cover both top and hist tools in all applicable test cases, add tests
for a few uncovered options, and extend checks for some existing tests.
- Add unit tests for actions
rtla's actions feature is implemented in its source file and contains
non-trivial parsing logic. Cover it with unit tests.
- Stop record trace on interrupt
Fix a bug where an interval exists after receiving a signal in which
the main instance is stopped but the record instance is not, leading to
discrepancies in reported results and sometimes rtla hanging.
- Restore continue flag in actions_perform()
Fix a bug where rtla always continues tracing after hitting a threshold
even if the continue action was triggered just once, and add tests
verifying that the flag is reset properly.
- Migrate command line interface to libsubcmd
Replace rtla's argument parsing using getopt_long() with libsubcmd, used
by perf and objtool, to reuse existing code and auto-generate better
help messages. Extensive unit tests are included to detect regressions.
- Add -A/--aligned option to timerlat tools
Add an option to align timerlat threads, based on the recently
introduced TIMERLAT_ALIGN option of the timerlat tracer, together with
unit tests and documentation.
- Document tests in README
Document how to run unit and runtime tests in rtla's README.txt,
including the dependencies needed to run them.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCajBedhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qoCyAQCdWOebZIJmDbuIPaJFXNlpF0JWg6ly
/1fHtM/TXA9l3gD+P4RrfWqwNzk1B1/jOfTma6kpIVW3rIWE+Kts1X3Dswk=
=4CXs
-----END PGP SIGNATURE-----
Merge tag 'trace-tools-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull RTLA tool updates from Steven Rostedt:
- Fix discrepancy in --dump-tasks option
Due to a mistake, rtla-timerlat-hist used the CLI syntax
"--dump-task" instead of the documented "--dump-tasks". Change the
option to match both documentation and the other timerlat tool,
rtla-timerlat-top.
- Extend coverage of runtime tests
Cover both top and hist tools in all applicable test cases, add tests
for a few uncovered options, and extend checks for some existing
tests.
- Add unit tests for actions
rtla's actions feature is implemented in its source file and contains
non-trivial parsing logic. Cover it with unit tests.
- Stop record trace on interrupt
Fix a bug where an interval exists after receiving a signal in which
the main instance is stopped but the record instance is not, leading
to discrepancies in reported results and sometimes rtla hanging.
- Restore continue flag in actions_perform()
Fix a bug where rtla always continues tracing after hitting a
threshold even if the continue action was triggered just once, and
add tests verifying that the flag is reset properly.
- Migrate command line interface to libsubcmd
Replace rtla's argument parsing using getopt_long() with libsubcmd,
used by perf and objtool, to reuse existing code and auto-generate
better help messages. Extensive unit tests are included to detect
regressions.
- Add -A/--aligned option to timerlat tools
Add an option to align timerlat threads, based on the recently
introduced TIMERLAT_ALIGN option of the timerlat tracer, together
with unit tests and documentation.
- Document tests in README
Document how to run unit and runtime tests in rtla's README.txt,
including the dependencies needed to run them.
* tag 'trace-tools-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits)
rtla: Document tests in README
Documentation/rtla: Add -A/--aligned option
rtla/tests: Add unit tests for -A/--aligned option
rtla/timerlat: Add -A/--aligned CLI option
rtla/tests: Add unit tests for CLI option callbacks
rtla/tests: Add unit tests for _parse_args() functions
rtla: Parse cmdline using libsubcmd
tools subcmd: allow parsing distinct --opt and --no-opt
tools subcmd: support optarg as separate argument
rtla: Add libsubcmd dependency
rtla/tests: Add runtime tests for restoring continue flag
rtla/tests: Run runtime tests in temporary directory
rtla/tests: Add unit test for restoring continue flag
rtla/actions: Restore continue flag in actions_perform()
rtla: Stop the record trace on interrupt
rtla/tests: Add unit tests for actions module
rtla/tests: Add runtime tests for -C/--cgroup
rtla/tests: Add runtime test for -k and -u options
rtla/tests: Add runtime test for -H/--house-keeping
rtla/tests: Cover all hist options in runtime tests
...
A partial read will store the completed byte count in io->bytes_done.
The regular completion path applies io_fixup_rw_res() so that, when the
following operation reaches EOF, the number of bytes already read is
returned.
The iopoll completion path does not apply this fixup to the return value
and can return zero instead.
Use the fixup result when updating the CQE, and the raw result for the
reissue check.
Cc: stable@vger.kernel.org
Fixes: 4d9cb92ca4 ("io_uring/rw: fix short rw error handling")
Signed-off-by: Michael Wigham <michael@wigham.net>
Link: https://patch.msgid.link/20260613225240.34032-1-michael@wigham.net
Signed-off-by: Jens Axboe <axboe@kernel.dk>
NOP file-acquisition support choses between a fixed (registered) file and
a normal fget()'d file based on its own IORING_NOP_FIXED_FILE flag in
sqe->nop_flags. However, a request's REQ_F_FIXED_FILE is set
independently from the generic IOSQE_FIXED_FILE sqe flag during request
init, before the issue handler runs.
If a NOP is submitted with IOSQE_FIXED_FILE set (so REQ_F_FIXED_FILE is
set) but without IORING_NOP_FIXED_FILE, io_nop() takes the normal path
and grabs a real reference via io_file_get_normal(). On completion,
io_put_file() only drops the reference when REQ_F_FIXED_FILE is clear,
so the fget()'d file is never released and leaks:
BUG: memory leak
unreferenced object 0xffff88800f42c240 (size 176):
kmem_cache_alloc_noprof+0x358/0x440
alloc_empty_file+0x57/0x180
path_openat+0x44/0x1e50
do_file_open+0x121/0x200
do_sys_openat2+0xa7/0x150
__x64_sys_openat+0x82/0xf0
Decide between fixed and normal file acquisition from REQ_F_FIXED_FILE,
the same way io_assign_file() does for every other opcode, and fold
IORING_NOP_FIXED_FILE into REQ_F_FIXED_FILE at prep time.
Cc: stable@vger.kernel.org
Fixes: a85f31052b ("io_uring/nop: add support for testing registered files and buffers")
Reported-by: syzbot+2cd473471e77bda12b0e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?id=879092631b98f73a28ea405adacfa5bb34a14a25
Signed-off-by: Vasileios Almpanis <vasilisalmpanis@gmail.com>
Link: https://patch.msgid.link/20260615144619.482749-1-vasilisalmpanis@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Dump the stack to the buffer on timerlat uret threashold event
Record the stack trace in the buffer for THREAD_URET as well as
THREAD_CONTEXT when the threshold is hit. Otherwise, if the threshold was
not hit at task wakeup, but was at task return, it will not produce a
stack trace making it harder to debug.
- Have osnoise trace prints print to all buffers
The osnoise tracer is allowed to print to the main buffer. Add a
osnoise_print() helper function and use trace_array_vprintk() to print
osnoise output.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCajDrBBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qgpwAQDmFBFP3dU6LiGp6U3UTYauAApah401
zXfmNxbGFO5rmwEAxIHCzoG3OZgrjrYhrkW9qBZDho7+1Frt7vphK71fYAE=
=0ayh
-----END PGP SIGNATURE-----
Merge tag 'trace-latency-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing latency updates from Steven Rostedt:
- Dump the stack to the buffer on timerlat uret threashold event
Record the stack trace in the buffer for THREAD_URET as well as
THREAD_CONTEXT when the threshold is hit. Otherwise, if the threshold
was not hit at task wakeup, but was at task return, it will not
produce a stack trace making it harder to debug.
- Have osnoise trace prints print to all buffers
The osnoise tracer is allowed to print to the main buffer. Add a
osnoise_print() helper function and use trace_array_vprintk() to
print osnoise output.
* tag 'trace-latency-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/osnoise: Array printk init and cleanup
tracing/osnoise: Dump stack on timerlat uret threshold event
- eprobes: BTF support for dereferencing pointers
. tracing/eprobes: Allow use of BTF names to dereference pointers. Add syntax
to the parsing of eprobes to typecast structure pointer trace event fields,
enabling BTF-based dereferencing instead of relying on manual offsets.
- probes: Improvements and robustness enhancements
. tracing: Use flexible array for entry fetch code. Store probe entry fetch
instructions in the probe_entry_arg allocation via a flexible array
member to simplify memory allocation and lifetime management.
. tracing: Replace BUG_ON with lockdep_assert_held in uprobe_buffer functions.
Replace BUG_ON() calls with lockdep_assert_held() in uprobe buffer
enable/disable paths to prevent kernel crashes and better verify lock ownership.
. tracing/probes: Ensure the uprobe buffer size is bigger than event size.
Add a BUILD_BUG_ON() assertion to guarantee that the per-CPU uprobe
working buffer size is always larger than the maximum probe event size.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmowny4bHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bLCAH/R4476TaJKhS6iAaMILz
6RaWmbbsrf4BjgMX3PnM3ROJo5oT3lZG3HQZIbrIdpAO8baB0uRLM8LXv3fteSkC
5C+tfAnTg7vGP1XbdGiDLKPcJUgVQo+SOjhT9f7VpTB/nhsNWC3aFVIxeLcbx89U
g3S9cMZ5ErBDnWsDiQ6v2mhNKJa+0f6egutSV7drN1yUkToPAnCfi9UrbMh/Tesh
zYhWcBCCcj3/JFUlPMcqamCWn12162jNp2dqZXTcsMYMOQpFUygeqIVdXlaH5wAp
niBpZrslP46hF84OBIdF8g8yP0xUnTToRMQmyFbeqTU1gmvBNeCV0VLoFB+02/OW
ujA=
=et3e
-----END PGP SIGNATURE-----
Merge tag 'probes-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
- BTF support for dereferencing pointers
Add syntax to the parsing of eprobes to typecast structure pointer
trace event fields, enabling BTF-based dereferencing instead of
relying on manual offsets.
- Improvements and robustness enhancements
- Use flexible array for entry fetch code.
Store probe entry fetch instructions in the probe_entry_arg
allocation via a flexible array member to simplify memory
allocation and lifetime management.
- Replace BUG_ON with lockdep_assert_held in uprobe_buffer functions
Replace BUG_ON() calls with lockdep_assert_held() in uprobe buffer
enable/disable paths to prevent kernel crashes and better verify
lock ownership.
- Ensure the uprobe buffer size is bigger than event size.
Add a BUILD_BUG_ON() assertion to guarantee that the per-CPU
uprobe working buffer size is always larger than the maximum probe
event size.
* tag 'probes-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/eprobes: Allow use of BTF names to dereference pointers
tracing: Replace BUG_ON with lockdep_assert_held in uprobe_buffer functions
tracing: Use flexible array for entry fetch code
tracing/probes: Ensure the uprobe buffer size is bigger than event size
- bootconfig: Render kernel subtree as cmdline string at build time
. bootconfig: move xbc_snprint_cmdline() to lib/bootconfig.c. Move the
xbc_snprint_cmdline() function and its buffer from main.c to the shared
lib/bootconfig.c parser library so it can be reused by userspace tools.
. tools/bootconfig: render kernel.* subtree as cmdline string with -C. Add a
new -C option to print the kernel.* subtree as a flat command-line string
at build time, allowing early parameter injection without runtime parsing.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmown+YbHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8blVEIAJpMmmEIjiiCIdAEfJKL
MTZo8C7V8sX+N3jmeaMmQNjkVfQuBbc4ORUtaZdxBs3E8BznN/zDs3ujSXfzbCe5
1Hc5A95g+ZXY+83ylCCAem6qTsWfYSN3j7oiyBx0CrRrXy7KupInE1BePMTg1DnZ
cAas3RLn5Qjyzg/yKMpkJNgCV/HxBCIAOXOF3F00S5THU5F1/W6VU3s8BpCU2mJK
nQXYGW7XfRkVhhQlkmBF5pfo5yPDeq7louxVCIw4AVJLHWIgxQ3v/d1wR24wu+kT
bZfDnsq0FVGeyjtRiX6iqFVc/zkQWhWrEFMbY3JNwW9lq4PT6nMH1ss1fNC3Ub1i
CJ8=
=apxi
-----END PGP SIGNATURE-----
Merge tag 'bootconfig-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull bootconfig updates from Masami Hiramatsu:
- bootconfig: move xbc_snprint_cmdline() to lib/bootconfig.c
Move the xbc_snprint_cmdline() function and its buffer from
main.c to the shared lib/bootconfig.c parser library so it
can be reused by userspace tools.
- render kernel.* subtree as cmdline string with -C
Add a new -C option to print the kernel.* subtree as a flat
command-line string at build time, allowing early parameter
injection without runtime parsing.
* tag 'bootconfig-v7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tools/bootconfig: render kernel.* subtree as cmdline string with -C
bootconfig: move xbc_snprint_cmdline() to lib/bootconfig.c
Several fixes and improvements to resctrl test and a change to
kselftest document to clarify the use of FORCE_TARGETS build
variable.
-----BEGIN PGP SIGNATURE-----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=FpFT
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-next-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
"Several fixes and improvements to resctrl tests and a change to
kselftest document to clarify the use of FORCE_TARGETS build variable"
* tag 'linux_kselftest-next-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kselftest: fix doc for ksft_test_result_report()
selftests/resctrl: Reduce L2 impact on CAT test
selftests/resctrl: Simplify perf usage in CAT test
selftests/resctrl: Remove requirement on cache miss rate
selftests/resctrl: Raise threshold at which MBM and PMU values are compared
selftests/resctrl: Increase size of buffer used in MBM and MBA tests
selftests/resctrl: Support multiple events associated with iMC
selftests/resctrl: Prepare for parsing multiple events per iMC
selftests/resctrl: Do not store iMC counter value in counter config structure
selftests/resctrl: Reduce interference from L2 occupancy during cache occupancy test
selftests/resctrl: Improve accuracy of cache occupancy test
docs: kselftest: Document the FORCE_TARGETS build variable
Fixes to tool and kunit core and new features to both to support
JUnit XML (primitive) and backtrace suppression API:
- bug/kunit: Core support for suppressing warning backtraces
- kunit: tool: Parse and print the reason tests are skipped
- kunit: tool: Add (primitive) support for outputting JUnit XML
- kunit:tool: Don't write to stdout when it should be disabled
- kunit: Add backtrace suppression self-tests
- drm: Suppress intentional warning backtraces in scaling unit tests
- kunit: Add documentation for warning backtrace suppression API
- kunit: Fix spelling mistakes in comments and messages
- gen_compile_commands: Ignore libgcc.a
- kunit: qemu_configs: Add or1k / openrisc configuration
-----BEGIN PGP SIGNATURE-----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=nc4g
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
"Fixes to tool and kunit core and new features to both to support JUnit
XML (primitive) and backtrace suppression API:
- Core support for suppressing warning backtraces
- Parse and print the reason tests are skipped
- Add (primitive) support for outputting JUnit XML
- Don't write to stdout when it should be disabled
- Add backtrace suppression self-tests
- Suppress intentional warning backtraces in scaling unit tests
- Add documentation for warning backtrace suppression API
- Fix spelling mistakes in comments and messages
- gen_compile_commands: Ignore libgcc.a
- qemu_configs: Add or1k / openrisc configuration"
* tag 'linux_kselftest-kunit-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit:tool: Don't write to stdout when it should be disabled
kunit: tool: Add (primitive) support for outputting JUnit XML
kunit: tool: Parse and print the reason tests are skipped
kunit: Add documentation for warning backtrace suppression API
drm: Suppress intentional warning backtraces in scaling unit tests
kunit: Add backtrace suppression self-tests
bug/kunit: Core support for suppressing warning backtraces
kunit: Fix spelling mistakes in comments and messages
kunit: qemu_configs: Add or1k / openrisc configuration
gen_compile_commands: Ignore libgcc.a
* Only trigger interrupts that defined ActiveBoth in ACPI on boot
-----BEGIN PGP SIGNATURE-----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=jCBH
-----END PGP SIGNATURE-----
Merge tag 'intel-gpio-v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/andy/linux-gpio-intel into gpio/for-current
intel-gpio for v7.1-1
* Only trigger interrupts that defined ActiveBoth in ACPI on boot
The MIN_RMA size checks in fadump_setup_param_area() use
(MIN_RMA * 1024 * 1024), which is evaluated in int and can
overflow when MIN_RMA is increased to values such as SZ_2G,
triggering compiler warnings such as:
warning: integer overflow in expression of type 'int'
results in '0' [-Woverflow]
Define MIN_RMA directly in bytes using SZ_1M and update the
callers accordingly. This avoids repeated unit conversions and
prevents integer overflow.
Also convert MIN_RMA back to MB when populating the firmware
architecture vector, since firmware expects the value in MB.
Suggested-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Sayali Patil <sayalip@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/310b040acef712fdc79e3e37d0f4c2213938b556.1781589284.git.sayalip@linux.ibm.com
During a syscall restart, block KUAP so that pending interrupts can be
replayed. The original KUAP state is not restored before returning to
userspace, causing subsequent userspace accesses to fault and eventually
trigger bad_access_pkey(), crashing the kernel.
The original KUAP register values are already saved in
arch_enter_from_user_mode(). Restore them on the syscall restart exit
path before returning to userspace.
Fixes: bee25f97ad ("powerpc: Enable GENERIC_ENTRY feature")
Reported-by: Sayali Patil <sayalip@linux.ibm.com>
Closes: https://lore.kernel.org/linuxppc-dev/fcd11556-27ac-4cd7-8c77-50716dec6985@linux.ibm.com/
Signed-off-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
Tested-by: Sayali Patil <sayalip@linux.ibm.com>
[Maddy: Added Closes tag]
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260615162617.2861795-1-mkchauras@gmail.com
- rework of dm-ima
- introduce dm-inlinecrypt
- fix wrong return value in dm-ioctl
- fix rcu stall when polling
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRnH8MwLyZDhyYfesYTAyx9YGnhbQUCajAXChQcbXBhdG9ja2FA
cmVkaGF0LmNvbQAKCRATAyx9YGnhbaiMAP9WzwyH3Y/cOdpdFoqqPi7IsXZisJPo
rFiAVL4rOgF3kQD/RRp5dkn4iKSYovjZr3+i6a7srxIkpfDEf4kP2mOJBAk=
=2jnV
-----END PGP SIGNATURE-----
Merge tag 'for-7.2/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka:
- small cleanups in dm-vdo, dm-raid, dm-cache, dm-zoned-metadata
- rework of dm-ima
- introduce dm-inlinecrypt
- fix wrong return value in dm-ioctl
- fix rcu stall when polling
* tag 'for-7.2/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-zoned-metadata: Use strscpy() to copy device name
dm cache: make smq background work limit configurable
dm-inlinecrypt: add support for hardware-wrapped keys
dm: limit target bio polling to one shot
dm-ioctl: report an error if a device has no table
dm: add documentation for dm-inlinecrypt target
dm-inlinecrypt: add target for inline block device encryption
block: export blk-crypto symbols required by dm-inlinecrypt
dm-ima: use active table's size if available
dm-ima: Fail more gracefully in dm_ima_measure_on_*
dm-ima: Handle race between rename and table swap
dm-ima: Fix issues with dm_ima_measure_on_device_rename
dm-ima: remove new_map from dm_ima_measure_on_device_clear
dm-ima: Fix UAF errors and measuring incorrect context
dm-ima: don't copy the active table to the inactive table
dm-ima: Remove status_flags from dm_ima_measure_on_table_load()
dm-ima: remove broken last_target_measured logic
dm-ima: remove dm_ima_reset_data()
dm-raid: only requeue bios when dm is suspending
dm vdo: use get_random_u32() where appropriate
mlxbf3_gpio_probe() logs a devm_gpiochip_add_data() failure but still
returns success. That leaves the platform device bound even though the
GPIO chip was not registered.
Return the registration error so probe failure matches the missing
gpiochip state.
Fixes: cd33f216d2 ("gpio: mlxbf3: Add gpio driver support")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260615091918.43333-1-pengpeng@iscas.ac.cn
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
