On HP OmniBook 7 the keyboard backlight and FnLock keys are handled
directly by the firmware. However, they still trigger WMI events which
results in "Unknown key code" warnings in dmesg.
Add these key codes to the keymap with KE_IGNORE to silence the warnings
since no software action is needed.
Tested-by: Artem S. Tashkinov <aros@gmx.com>
Reported-by: Artem S. Tashkinov <aros@gmx.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221181
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260403080155.169653-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The function sysfs_match_string() can return negative error codes and
the variable assigned to it is the enum 'option'. Which could be an
unsigned int due to different compiler implementations.
Assign signed variable 'ret' to sysfs_match_string(), check for error,
then assign ret to option.
Detected by Smatch:
drivers/platform/x86/uniwill/uniwill-acpi.c:919 usb_c_power_priority_store()
warn: unsigned 'option' is never less than zero.
Fixes: 03ae0a0d09 ("platform/x86: uniwill-laptop: Implement USB-C power priority setting")
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Link: https://patch.msgid.link/20260403070928.802196-1-ethantidmore06@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Ensure the temp value has been properly parsed from the user-provided
buffer and initialized to be used in later operations. While at it,
prefer a convenient kstrtoul() helper.
Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool.
Fixes: ad6ce87e5b ("[PATCH] dell_rbu: changes in packet update mechanism")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Link: https://patch.msgid.link/20260403134240.604837-1-pchelkin@ispras.ru
[ij: add include]
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
pn532_receive_buf() reports the number of accepted bytes to the serdev
core. The current code consumes bytes into recv_skb and may already hand
a complete frame to pn533_recv_frame() before allocating a fresh receive
buffer.
If that alloc_skb() fails, the callback returns 0 even though it has
already consumed bytes, and it leaves recv_skb as NULL for the next
receive callback. That breaks the receive_buf() accounting contract and
can also lead to a NULL dereference on the next skb_put_u8().
Allocate the receive skb lazily before consuming the next byte instead.
If allocation fails, return the number of bytes already accepted.
Fixes: c656aa4c27 ("nfc: pn533: add UART phy driver")
Cc: stable@vger.kernel.org
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Link: https://patch.msgid.link/20260405094003.3-pn533-v2-pengpeng@iscas.ac.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
hp_wmi_hwmon_priv.mode and .pwm are written by hp_wmi_hwmon_write() in
sysfs context and read by hp_wmi_hwmon_keep_alive_handler() in a
workqueue. A concurrent write and keep-alive expiry can observe an
inconsistent mode/pwm pair (e.g. mode=MANUAL with a stale pwm).
Add a mutex to hp_wmi_hwmon_priv protecting mode and pwm. Hold it in
hp_wmi_hwmon_write() across the field update and apply call, and in
hp_wmi_hwmon_keep_alive_handler() before calling apply.
In hp_wmi_hwmon_read(), only the pwm_enable path reads priv->mode; use
scoped_guard() there to avoid holding the lock across unrelated WMI
calls.
Fixes: c203c59fb5 ("platform/x86: hp-wmi: implement fan keep-alive")
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
Link: https://patch.msgid.link/20260407142515.20683-6-emreleno@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
gpu_delta was declared as u8. If the firmware specifies a GPU RPM
lower than the CPU RPM, subtracting them causes an underflow
(e.g. 10 - 20 = 246), which forces the GPU fan to remain clamped at
U8_MAX (100% speed) during operation.
Change gpu_delta to int and use signed arithmetic. Existing signed logic
in hp_wmi_fan_speed_set() correctly handles negative deltas.
Fixes: 46be1453e6 ("platform/x86: hp-wmi: add manual fan control for Victus S models")
Suggested-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
Link: https://patch.msgid.link/20260407142515.20683-5-emreleno@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently, schedule_delayed_work() is used to queue the 90s keep-alive
timer. If a user manually changes the fan speed at T=85s,
schedule_delayed_work() leaves the existing timer in place as it is a
no-op if the work is already pending. This results in the keep-alive
timer firing unnecessarily at T=90s, just 5 seconds after the user
action.
Replace schedule_delayed_work() with mod_delayed_work() to reset the
90s timer whenever fan settings are applied. This guarantees a full 90s
delay after every user interaction, preventing redundant keep-alive
executions and improving efficiency.
Fixes: c203c59fb5 ("platform/x86: hp-wmi: implement fan keep-alive")
Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
Link: https://patch.msgid.link/20260407142515.20683-4-emreleno@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
hp_wmi_apply_fan_settings() uses cancel_delayed_work_sync() to stop
the keep-alive timer in AUTO mode. However, since
hp_wmi_apply_fan_settings() is also called from the keep-alive
handler, a race condition with a sysfs write can cause the handler to
wait on itself, leading to a deadlock.
Replace cancel_delayed_work_sync() with cancel_delayed_work() in
hp_wmi_apply_fan_settings() to avoid the self-flush deadlock.
Fixes: c203c59fb5 ("platform/x86: hp-wmi: implement fan keep-alive")
Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
Link: https://patch.msgid.link/20260407142515.20683-3-emreleno@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
hp_wmi_get_fan_count_userdefine_trigger() can fail, but its return
value was silently ignored in hp_wmi_apply_fan_settings() for
PWM_MODE_MAX/AUTO. Propagate these errors consistently.
Additionally, handle the return value of hp_wmi_apply_fan_settings()
in its callers by adding appropriate warnings on failure, and remove an
unreachable "return 0" at the end of the function.
Fixes: 46be1453e6 ("platform/x86: hp-wmi: add manual fan control for Victus S models")
Signed-off-by: Emre Cecanpunar <emreleno@gmail.com>
Link: https://patch.msgid.link/20260407142515.20683-2-emreleno@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add the newly introduced memory-region-names to all occurences of
ti,*-r5f. This helps adding a name to each memory-region so it is
easier to see what memory regions are for.
Signed-off-by: Markus Schneider-Pargmann (TI) <msp@baylibre.com>
Link: https://patch.msgid.link/20260318-topic-am62a-ioddr-dt-v6-19-v3-3-c41473cb23c3@baylibre.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Extend the PMU test suite to cover overflow interrupts. The test enables
the PMI (Performance Monitor Interrupt), sets counter 0 to one less than
the overflow value, and verifies that an interrupt is raised when the
counter overflows. A guest interrupt handler checks the interrupt cause
and disables further PMU interrupts upon success.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Introduce a basic PMU test that verifies hardware event counting for
four performance counters. The test enables the events for CPU cycles,
instructions retired, branch instructions, and branch misses, runs a
fixed number of loops, and checks that the counter values fall within
expected ranges. It also validates that the host supports PMU and that
the VM feature is enabled.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add helper macros and functions to read and write CPU configuration
registers (cpucfg) from the guest and from the VMM. This interface is
required in upcoming selftests for querying and setting CPU features,
such as PMU capabilities.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Implement irqfd that deliver msi to vCPU and vCPU dmsintc irq injection.
Add pch_msi_set_irq() choice dmsintc to set msi irq by the msg_addr and
implement dmsintc set msi irq.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add device model for DMSINTC interrupt controller, implement basic
create/destroy/set_attr interfaces, and register device model to kvm
device table.
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
vcpu_is_preempted() is performance sensitive that called in function
osq_lock(), here make it as a macro. So that parameter is not parsed
at most time, it can avoid cache line thrashing across numa nodes.
Here is part of UnixBench result on Loongson-3C5000 DualWay machine with
32 cores and 2 numa nodes.
original inline macro
execl 7025.7 6991.2 7242.3
fstime 474.6 703.1 1071
From the test result, making vcpu_is_preempted() as a macro is the best,
and there is some improvment compared with the original function method.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
CSR register LOONGARCH_CSR_GSTAT stores guest VMID information. With
existing implementation method, VMID is per vCPU, similar with ASID in
kernel. LOONGARCH_CSR_GSTAT is written at VM entry even if VMID is not
changed.
Here move LOONGARCH_CSR_GSTAT save/restore in vCPU context switch, and
update LOONGARCH_CSR_GSTAT only when VMID is updated at VM entry. At
most time VM enter/exit is much more frequent than vCPU thread context
switch.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
CSR register LOONGARCH_CSR_EENTRY is shared between host CPU and guest
vCPU, KVM need save and restore LOONGARCH_CSR_EENTRY register. Here move
LOONGARCH_CSR_EENTRY saving in to context switch function rather than VM
entry.
At most time VM enter/exit is much more frequent than vCPU thread context
switch.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add kvm_request_pending() checking firstly in kvm_late_check_requests(),
at most time there is no pending request, then the following pending bit
checking can be skipped.
Also embed function kvm_check_pmu() in to kvm_late_check_requests(), and
put it after the kvm_request_pending() checking.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The function reads LOONGARCH_CSR_CRMD but uses CSR_PRMD_PPLV to
extract the privilege level. While both masks have the same value
(0x3), CSR_CRMD_PLV is the semantically correct constant for CRMD.
Cc: stable@vger.kernel.org
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Tao Cui <cuitao@kylinos.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
In an armv7 system that uses non-3G/1G split and with more than 512MB physical memory, driver load may fail with following error:
section 29 reloc 0 sym '': relocation 42 out of range (0xc2ab9be8 ->
0x7fad5998)
This happens when relocation R_ARM_PREL31 from the unwind section
.ARM.extab and .ARM.exidx are allocated from the VMALLOC space while
.text section is from MODULES_VADDR space. It exceeds the +/-1GB
relocation requirement of R_ARM_PREL31 hence triggers the error.
The fix is to mark .ARM.extab and .ARM.exidx sections as executable so
they can be allocated along with .text section and always meet range
requirement.
Co-developed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reject ADFS disc records with a zero zone count during boot block
validation, before the disc record is used.
When nzones is 0, adfs_read_map() passes it to kmalloc_array(0, ...)
which returns ZERO_SIZE_PTR, and adfs_map_layout() then writes to
dm[-1], causing an out-of-bounds write before the allocated buffer.
adfs_validate_dr0() already rejects nzones != 1 for old-format
images. Add the equivalent check to adfs_validate_bblk() for
new-format images so that a crafted image with nzones == 0 is
rejected at probe time.
Found by syzkaller.
Fixes: f6f14a0d71 ("fs/adfs: map: move map-specific sb initialisation to map.c")
Signed-off-by: Bae Yeonju <iwasbaeyz@gmail.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Birger Koblitz says:
====================
r8152: Add support for the RTL8157 5Gbit USB Ethernet chip
Add support for the RTL8157, which is a 5GBit USB-Ethernet adapter
chip in the RTL815x family of chips.
The RTL8157 uses a different frame descriptor format, and different
SRAM/ADV access methods, plus offers 5GBit/s Ethernet, so support for these
features is added in addition to chip initialization and configuration.
The module was tested with an OEM RTL8157 USB adapter:
[25758.328238] usb 4-1: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
[25758.345565] usb 4-1: New USB device found, idVendor=0bda, idProduct=8157, bcdDevice=30.00
[25758.345585] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=7
[25758.345593] usb 4-1: Product: USB 10/100/1G/2.5G/5G LAN
[25758.345599] usb 4-1: Manufacturer: Realtek
[25758.345605] usb 4-1: SerialNumber: 000300E04C68xxxx
[25758.534241] r8152-cfgselector 4-1: reset SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
[25758.603511] r8152 4-1:1.0: skip request firmware
[25758.653351] r8152 4-1:1.0 eth0: v1.12.13
[25758.689271] r8152 4-1:1.0 enx00e04c68xxxx: renamed from eth0
[25763.271682] r8152 4-1:1.0 enx00e04c68xxxx: carrier on
The RTL8157 adapter was tested against an AQC107 PCIe-card supporting
10GBit/s and an RTL8126 5Gbit PCIe-card supporting 5GBit/s for
performance, link speed and EEE negotiation. Using USB3.2 Gen 1 with
the RTL8157 USB adapter and running iperf3 against the AQC107 PCIe
card resulted in 3.47 Gbits/sec, whereas using USB3.2 Gen2 resulted
in 4.70 Gbits/sec, speeds against the RTL8126-card were the same.
As the code integrates the RTL8157-specific code with existing RTL8156 code
in order to improve code maintainability (instead of adding RTL8157-specific
functions duplicaing most of the RTL8156 code), regression tests were done
with an Edimax EU-4307 V1.0 USB-Ethernet adapter with RTL8156.
The code is based on the out-of-tree r8152 driver published by Realtek under
the GPL.
This patch is on top of linux-next as the code re-uses the 2.5 Gbit EEE
recently added in r8152.c.
Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
====================
Link: https://patch.msgid.link/20260404-rtl8157_next-v7-0-039121318f23@birger-koblitz.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The RTL8157 uses a different packet descriptor format compared to the
previous generation of chips. Add support for this format by adding a
descriptor format structure into the r8152 structure and corresponding
desc_ops functions which abstract the vlan-tag, tx/rx len and
tx/rx checksum algorithms.
Also, add support for the ADV indirect access interface of the RTL8157
and PHY setup.
For initialization of the RTL8157, combine the existing RTL8156B and
RTL8156 init functions and add RTL8157-specific functinality in order
to improve code readability and maintainability.
r8156_init() is now called with RTL_VER_10 and RTL_VER_11 for the RTL8156,
with RTL_VER_12, RTL_VER_13 and RTL_VER_15 for the RTL8156B and with
RTL_VER_16 for the RTL8157 and checks the version for chip-specific code.
Also add USB power control functions for the RTL8157.
Add support for the USB device ID of Realtek RTL8157-based adapters. Detect
the RTL8157 as RTL_VER_16 and set it up.
Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
Link: https://patch.msgid.link/20260404-rtl8157_next-v7-2-039121318f23@birger-koblitz.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The RTL8157 supports 5GBit Link speeds. Add support for this speed
in the setup and setting/getting through ethtool. Also add 5GBit EEE.
Add functionality for setup and ethtool get/set methods.
Signed-off-by: Birger Koblitz <mail@birger-koblitz.de>
Link: https://patch.msgid.link/20260404-rtl8157_next-v7-1-039121318f23@birger-koblitz.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
So far we used the verb cache to restore the GPIO mask, direction and
data bits at PM resume. But, due to the nature of the cache resume
mechanism, the calling order isn't guaranteed, and this might lead to
some inconsistency at the restored state.
For assuring the GPIO verb orders, use the new GPIO helper function to
explicitly set up the GPIO bits, instead of using the codec verb
caches, while keeping the current data bits in ad198x_spec.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260409093826.1317626-6-tiwai@suse.de
The previous implementation of the quirk for CSL Unity BF24B in commit
de65275fc9 ("ALSA: hda/realtek: Add quirk for CSL Unity BF24B")
introduced the unnecessary GPIO caching which leads to a superfluous
write at each init/resume.
Use the new helper to write GPIO bits directly for optimization.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260409093826.1317626-5-tiwai@suse.de
Use a new helper function to clean up the code.
Along with it, make alc_write_gpio() static as well, which is used
only locally in realtek.c.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260409093826.1317626-4-tiwai@suse.de
We used snd_hda_codec_read() for the verb write when a synchronization
is needed after the write, e.g. for the power state toggle or such
cases. It works in principle, but it looks rather confusing and too
hackish.
For improving the code readability, introduce a new helper function,
snd_hda_codec_write_sync(), which is another variant of
snd_hda_codec_write(), and replace the existing snd_hda_codec_read()
calls with this one.
No behavior change but just the code refactoring.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260409093826.1317626-2-tiwai@suse.de
Setting up the interface when suspended/resumeing fail on this card.
Adding a reset and delay quirk will eliminate this problem.
usb 1-1: new full-speed USB device number 2 using xhci-hcd
usb 1-1: New USB device found, idVendor=12d1, idProduct=3a07
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: HUAWEI USB-C HEADSET
usb 1-1: Manufacturer: bestechnic
usb 1-1: SerialNumber: 0296C100000000000000000000000
Signed-off-by: Lianqin Hu <hulianqin@vivo.com>
Link: https://patch.msgid.link/TYUPR06MB62176A18EA7A9DD0AC2826BCD2582@TYUPR06MB6217.apcprd06.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The msnd drivers do not implement system sleep callbacks today, so
they have no defined way to recover DSP state after suspend.
Add common card suspend/resume helpers, rerun the DSP
initialization path on resume, restore the cached capture-source
state, and rearm the shared IRQ for already-open users.
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260409-msnd-pm-support-v1-2-2abef720d0e7@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
System suspend cannot work for msnd today because the PCM trigger
paths reject SNDRV_PCM_TRIGGER_SUSPEND, and the driver has only
refcounted IRQ helpers.
Add the small helpers needed by the PM callbacks and restore master
volume from the cached ALSA mixer state when the DSP is
reinitialized.
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260409-msnd-pm-support-v1-1-2abef720d0e7@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_akm4xxx_init() clears the register and volume caches before
dispatching by codec type. The AK5365 case then returns immediately,
leaving the software cache at zero instead of the documented AK5365
reset defaults.
The AK5365 capture volume controls read from volumes[] and the proc
register dump reads from images[], so the initial capture volume state
and proc output are wrong until a control write happens.
Seed the AK5365 cache with its documented reset defaults instead of
adding a guessed init sequence. The datasheet documents the reset
values and states that MCLK/LRCK changes do not require a PDN/PWN
reset because the chip has a built-in reset-free circuit.
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260408-ak5365-cache-defaults-v1-1-fff639aca3e3@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Since the introduction of d4433c7600 ("drm/i915/gem: Use the proto-context
to handle create parameters (v5)") it has not been possible for VM to change
after context creation so the check will never fail.
Sima's analysis:
This check was added in f7ce8639f6 ("drm/i915/gem: Split the context's
obj:vma lut into its own mutex") but without any hint in the commit
message as to why. In another hunk of that commit there's a hint though in
__eb_add_lut:
/* user racing with ctx set-vm */
This would mean that this bug was introduced in e0695db729 ("drm/i915:
Create/destroy VM (ppGTT) for use with contexts"), which allowed to change
the gem_ctx->vm at runtime, opening up the race that was partially fixed
in the earlier referenced commit about a year later.
But it cannot be exploited anymore in anything remotely recent because
with the introduction of proto-contexts we've made gem_ctx->vm invariant
again, exactly to preemptively close all these potential issues.
Specifically d4433c7600 ("drm/i915/gem: Use the proto-context to handle
create parameters (v5)") is the vm specific part of the proto-context
work.
v3:
- Include Sima's analysis and WARN_ON_ONCE
v4:
- Focus only on latest mainline codebase
References: https://lore.kernel.org/all/20260324151741.29338-1-sosohero200@gmail.com/
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Cc: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patch.msgid.link/20260409053111.8914-1-joonas.lahtinen@linux.intel.com
(cherry picked from commit f6d4afc9ec)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Introduce the capability bit icm_mng_function_id_mode to indicate that
the device firmware uses vhca_id instead of function_id as the effective
identifier for the firmware commands MANAGE_PAGES, QUERY_PAGES, and page
request event.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Akiva Goldberger <agoldberger@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260403090028.137783-3-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The MLX5_PF enum value in mlx5_func_type is used to track firmware
page allocations for the page manager function itself, which is either
the ECPF on SmartNIC systems or the host PF when there is no ECPF.
Rename it to MLX5_SELF to accurately reflect that this counter tracks
pages allocated by the manager for its own use, regardless of whether
it is a PF or ECPF.
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260403090028.137783-2-tariqt@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Since the introduction of d4433c7600 ("drm/i915/gem: Use the proto-context
to handle create parameters (v5)") it has not been possible for VM to change
after context creation so the check will never fail.
Sima's analysis:
This check was added in f7ce8639f6 ("drm/i915/gem: Split the context's
obj:vma lut into its own mutex") but without any hint in the commit
message as to why. In another hunk of that commit there's a hint though in
__eb_add_lut:
/* user racing with ctx set-vm */
This would mean that this bug was introduced in e0695db729 ("drm/i915:
Create/destroy VM (ppGTT) for use with contexts"), which allowed to change
the gem_ctx->vm at runtime, opening up the race that was partially fixed
in the earlier referenced commit about a year later.
But it cannot be exploited anymore in anything remotely recent because
with the introduction of proto-contexts we've made gem_ctx->vm invariant
again, exactly to preemptively close all these potential issues.
Specifically d4433c7600 ("drm/i915/gem: Use the proto-context to handle
create parameters (v5)") is the vm specific part of the proto-context
work.
v3:
- Include Sima's analysis and WARN_ON_ONCE
v4:
- Focus only on latest mainline codebase
References: https://lore.kernel.org/all/20260324151741.29338-1-sosohero200@gmail.com/
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Linus Torvalds <torvalds@linuxfoundation.org>
Cc: Simona Vetter <simona.vetter@ffwll.ch>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Cc: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patch.msgid.link/20260409053111.8914-1-joonas.lahtinen@linux.intel.com
The Top Level Mode Multiplexer (TLMM) in the Qualcomm Hawi SoC
provides GPIO and pinctrl functionality for UFS, SDC and 226
GPIO pins.
Add a DeviceTree binding to describe the TLMM block on Qualcomm's
Hawi SoC.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Convert pinctrl-max77620 devicetree bindings for the MAX77620 PMIC from
TXT to YAML format. This patch does not change any functionality; the
bindings remain the same.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Remove the cavium,thunder-8890 GPIO binding as there are no active
use cases. The binding is unused as the corresponding kernel driver
binds via PCI and not the compatible.
Signed-off-by: Shi Hao <i.shihao.999@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260408093313.17025-1-i.shihao.999@gmail.com
[Bartosz: tweaked the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
tegra_gpio_irq_release_resources() erroneously calls tegra_gpio_enable()
instead of tegra_gpio_disable(). When IRQ resources are released, the
GPIO configuration bit (CNF) should be cleared to deconfigure the pin as
a GPIO. Leaving it enabled wastes power and can cause unexpected behavior
if the pin is later reused for an alternate function via pinctrl.
Fixes: 66fecef5bd ("gpio: tegra: Convert to gpio_irq_chip")
Signed-off-by: Samasth Norway Ananda <samasth.norway.ananda@oracle.com>
Link: https://patch.msgid.link/20260407210247.1737938-1-samasth.norway.ananda@oracle.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Just like the TI J7200 padconf, we lose the context and therefore need
to save it and restore it across suspend/resume states.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
[linusw@kernel.org: rebased on am62l changes]
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add the "brcm,bcm7038-padconf" compatible to the pinctrl-single binding.
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
