net is already set, derived from nf_conn.
I don't see how the device could be living in a different netns
than the conntrack entry.
Remove the extra variable and re-use existing one.
Signed-off-by: Florian Westphal <fw@strlen.de>
After commit 07919126ec ("netfilter: annotate NAT helper hook pointers
with __rcu"), sparse can warn about type/address-space mismatches when
RCU-dereferencing NAT helper hook function pointers.
The hooks are __rcu-annotated and accessed via rcu_dereference(), but the
combination of complex function pointer declarators and the WRITE_ONCE()
machinery used by RCU_INIT_POINTER()/rcu_assign_pointer() can confuse
sparse and trigger false positives.
Introduce typedefs for the NAT helper function types, so __rcu applies to
a simple "fn_t __rcu *" pointer form. Also replace local typeof(hook)
variables with "fn_t *" to avoid propagating __rcu address space into
temporaries.
No functional change intended.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603022359.3dGE9fwI-lkp@intel.com/
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
A lockdep circular locking dependency warning can be triggered
reproducibly when using a force-feedback gamepad with uinput (for
example, playing ELDEN RING under Wine with a Flydigi Vader 5
controller):
ff->mutex -> udev->mutex -> input_mutex -> dev->mutex -> ff->mutex
The cycle is caused by four lock acquisition paths:
1. ff upload: input_ff_upload() holds ff->mutex and calls
uinput_dev_upload_effect() -> uinput_request_submit() ->
uinput_request_send(), which acquires udev->mutex.
2. device create: uinput_ioctl_handler() holds udev->mutex and calls
uinput_create_device() -> input_register_device(), which acquires
input_mutex.
3. device register: input_register_device() holds input_mutex and
calls kbd_connect() -> input_register_handle(), which acquires
dev->mutex.
4. evdev release: evdev_release() calls input_flush_device() under
dev->mutex, which calls input_ff_flush() acquiring ff->mutex.
Fix this by introducing a new state_lock spinlock to protect
udev->state and udev->dev access in uinput_request_send() instead of
acquiring udev->mutex. The function only needs to atomically check
device state and queue an input event into the ring buffer via
uinput_dev_event() -- both operations are safe under a spinlock
(ktime_get_ts64() and wake_up_interruptible() do not sleep). This
breaks the ff->mutex -> udev->mutex link since a spinlock is a leaf in
the lock ordering and cannot form cycles with mutexes.
To keep state transitions visible to uinput_request_send(), protect
writes to udev->state in uinput_create_device() and
uinput_destroy_device() with the same state_lock spinlock.
Additionally, move init_completion(&request->done) from
uinput_request_send() to uinput_request_submit() before
uinput_request_reserve_slot(). Once the slot is allocated,
uinput_flush_requests() may call complete() on it at any time from
the destroy path, so the completion must be initialised before the
request becomes visible.
Lock ordering after the fix:
ff->mutex -> state_lock (spinlock, leaf)
udev->mutex -> state_lock (spinlock, leaf)
udev->mutex -> input_mutex -> dev->mutex -> ff->mutex (no back-edge)
Fixes: ff46255123 ("Input: uinput - switch to the new FF interface")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/CABXGCsMoxag+kEwHhb7KqhuyxfmGGd0P=tHZyb1uKE0pLr8Hkg@mail.gmail.com/
Signed-off-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Link: https://patch.msgid.link/20260407075031.38351-1-mikhail.v.gavrilov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
PPC_RAW_LI32 is not a valid macro in the PowerPC BPF JIT. Use PPC_LI32,
which correctly handles immediate loads for large values.
Fixes the build error introduced when adding fsession support on ppc32.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202604040212.jIxEd2DW-lkp@intel.com/
Fixes: 92258b5bf1 ("powerpc32/bpf: Add fsession support")
Signed-off-by: Abhishek Dubey <adubey@linux.ibm.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260408055301.232745-1-adubey@linux.ibm.com
VESA backlight enable is possible when
BACKLIGHT_AUX_ENABLE_CAPABLE is true via AUX command or when
BACKLIGHT_PIN_ENABLE_CAPABLE is true via eDP connector pin.
Similarly, backlight brightness adjustment can be
done via AUX-based control or PWM pin-based control.
It means there can be three configurations:
1) Full AUX-based: Enable and adjustment both via AUX. We currently
support this (apart from the AUX luminance-based backlight control).
2) Hybrid: Enable via the BL_ENABLE pin, adjustment via either AUX or
PWM.
3) Fully PWM pin-based: Enable via the BL_ENABLE pin, adjustment via
PWM.
Since that only 1 is supported as of now we need to make
sure we do not try to manipulate backlight when
BACKLIGHT_AUX_ENABLE_CAPABLE is not set.
Also fix return value when condition is not fulfilled.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/work_items/15907
Fixes: 0fb03890d1 ("drm/i915/backlight: Check if VESA backlight is possible")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patch.msgid.link/20260407030710.1440046-1-suraj.kandpal@intel.com
Andrea Mayer says:
====================
seg6: fix dst_cache sharing in seg6 lwtunnel
The seg6 lwtunnel encap uses a single per-route dst_cache shared
between seg6_input_core() and seg6_output_core(). These two paths
can perform the post-encap SID lookup in different routing contexts
(e.g., ip rules matching on the ingress interface, or VRF table
separation). Whichever path runs first populates the cache, and the
other reuses it blindly, bypassing its own lookup.
Patch 1 fixes this by splitting the cache into cache_input and
cache_output. Patch 2 adds a selftest that validates the isolation.
====================
Link: https://patch.msgid.link/20260404004405.4057-1-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest that verifies the dst_cache in seg6 lwtunnel is not
shared between the input (forwarding) and output (locally generated)
paths.
The test creates three namespaces (ns_src, ns_router, ns_dst)
connected in a line. An SRv6 encap route on ns_router encapsulates
traffic destined to cafe::1 with SID fc00::100. The SID is
reachable only for forwarded traffic (from ns_src) via an ip rule
matching the ingress interface (iif veth-r0 lookup 100), and
blackholed in the main table.
The test verifies that:
1. A packet generated locally on ns_router does not reach
ns_dst with an empty cache, since the SID is blackholed;
2. A forwarded packet from ns_src populates the input cache
from table 100 and reaches ns_dst;
3. A packet generated locally on ns_router still does not
reach ns_dst after the input cache is populated,
confirming the output path does not reuse the input
cache entry.
Both the forwarded and local packets are pinned to the same CPU
with taskset, since dst_cache is per-cpu.
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Justin Iurman <justin.iurman@gmail.com>
Link: https://patch.msgid.link/20260404004405.4057-3-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The seg6 lwtunnel uses a single dst_cache per encap route, shared
between seg6_input_core() and seg6_output_core(). These two paths
can perform the post-encap SID lookup in different routing contexts
(e.g., ip rules matching on the ingress interface, or VRF table
separation). Whichever path runs first populates the cache, and the
other reuses it blindly, bypassing its own lookup.
Fix this by splitting the cache into cache_input and cache_output,
so each path maintains its own cached dst independently.
Fixes: 6c8702c60b ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Cc: stable@vger.kernel.org
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Justin Iurman <justin.iurman@gmail.com>
Link: https://patch.msgid.link/20260404004405.4057-2-andrea.mayer@uniroma2.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The querier-interval test adds h1 (currently a slave of the VRF created
by simple_if_init) to a temporary bridge br1 acting as an outside IGMP
querier. The kernel VRF driver (drivers/net/vrf.c) calls cycle_netdev()
on every slave add and remove, toggling the interface admin-down then up.
Phylink takes the PHY down during the admin-down half of that cycle.
Since h1 and swp1 are cable-connected, swp1 also loses its link may need
several seconds to re-negotiate.
Use setup_wait_dev $h1 0 which waits for h1 to return to UP state, so the
test can rely on the link being back up at this point.
Fixes: 4d8610ee8b ("selftests: net: bridge: add vlan mcast_querier_interval tests")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://patch.msgid.link/c830f130860fd2efae08bfb9e5b25fd028e58ce5.1775424423.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
net: pull gso packet headers in core stack
Most ndo_start_xmit() methods expects headers of gso packets
to be already in skb->head.
net/core/tso.c users are particularly at risk, because tso_build_hdr()
does a memcpy(hdr, skb->data, hdr_len);
qdisc_pkt_len_segs_init() already does a dissection of gso packets.
Use pskb_may_pull() instead of skb_header_pointer() to make
sure drivers do not have to reimplement this.
First patch is a small cleanup to ease second patch review.
====================
Link: https://patch.msgid.link/20260403221540.3297753-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most ndo_start_xmit() methods expects headers of gso packets
to be already in skb->head.
net/core/tso.c users are particularly at risk, because tso_build_hdr()
does a memcpy(hdr, skb->data, hdr_len);
qdisc_pkt_len_segs_init() already does a dissection of gso packets.
Use pskb_may_pull() instead of skb_header_pointer() to make
sure drivers do not have to reimplement this.
Some malicious packets could be fed, detect them so that we can
drop them sooner with a new SKB_DROP_REASON_SKB_BAD_GSO drop_reason.
Fixes: e876f208af ("net: Add a software TSO helper API")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260403221540.3297753-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reduce indentation level by returning early if the transport header
was not set.
Add an unlikely() clause as this is not the common case.
No functional change.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260403221540.3297753-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sashiko points out that we use qops in __net_mp_open_rxq()
but never validate they are null. This was introduced when
check was moved from netdev_rx_queue_restart().
Look at ops directly instead of the locking config.
qops imply netdev_need_ops_lock(). We used netdev_need_ops_lock()
initially to signify that the real_num_rx_queues check below
is safe without rtnl_lock, but I'm not sure if this is actually
clear to most people, anyway.
Fixes: da7772a2b4 ("net: move mp->rx_page_size validation to __net_mp_open_rxq()")
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Link: https://patch.msgid.link/20260404001938.2425670-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
socat v1.8.1.0 now defaults to shut-null, it sends an extra
0-length UDP packet when sender disconnects. This breaks
our tests which expect the exact packet sequence.
Add shut-none which was the old default where necessary.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Joe Damato <joe@dama.to>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260404230103.2719103-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch fixes an issue where reading the MAC address from the eFUSE
fails due to a race condition.
The root cause was identified by comparing the driver's behavior with a
custom U-Boot port. In U-Boot, the MAC address was read successfully
every time because the driver was loaded later in the boot process, giving
the hardware ample time to initialize. In Linux, reading the eFUSE
immediately returns all zeros, resulting in a fallback to a random MAC address.
Hardware cold-boot testing revealed that the eFUSE controller requires a
short settling time to load its internal data. Adding a 2000-5000us
delay after the reset ensures the hardware is fully ready, allowing the
native MAC address to be read consistently.
Fixes: 02ff155ea2 ("net: stmmac: Add glue driver for Motorcomm YT6801 ethernet controller")
Reported-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Closes: https://lore.kernel.org/24cfefff-1233-4745-8c47-812b502d5d19@tuxedocomputers.com
Signed-off-by: Johan Alvarado <contact@c127.dev>
Reviewed-by: Yao Zi <me@ziyao.cc>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/fc5992a4-9532-49c3-8ec1-c2f8c5b84ca1@smtp-relay.sendinblue.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Amery Hung says:
====================
Allow referenced dynptr to be overwritten when siblings exists
The patchset conditionally allow a referenced dynptr to be overwritten
when its siblings (original dynptr or dynptr clone) exist. Do it before
the verifier relation tracking refactor to mimimize verifier changes at
a time.
====================
Link: https://patch.msgid.link/20260406150548.1354271-1-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Test overwriting referenced dynptr and clones to make sure it is only
allow when there is at least one other dynptr with the same ref_obj_id.
Also make sure slice is still invalidated after the dynptr's stack slot
is destroyed.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260406150548.1354271-3-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The verifier currently does not allow overwriting a referenced dynptr's
stack slot to prevent resource leak. This is because referenced dynptr
holds additional resources that requires calling specific helpers to
release. This limitation can be relaxed when there are multiple copies
of the same dynptr. Whether it is the orignial dynptr or one of its
clones, as long as there exists at least one other dynptr with the same
ref_obj_id (to be used to release the reference), its stack slot should
be allowed to be overwritten.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260406150548.1354271-2-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When a non-{add,sub} alu op such as xor is performed on a scalar
register that previously had a BPF_ADD_CONST delta, the else path
in adjust_reg_min_max_vals() only clears dst_reg->id but leaves
dst_reg->delta unchanged.
This stale delta can propagate via assign_scalar_id_before_mov()
when the register is later used in a mov. It gets a fresh id but
keeps the stale delta from the old (now-cleared) BPF_ADD_CONST.
This stale delta can later propagate leading to a verifier-vs-
runtime value mismatch.
The clear_id label already correctly clears both delta and id.
Make the else path consistent by also zeroing the delta when id
is cleared. More generally, this introduces a helper clear_scalar_id()
which internally takes care of zeroing. There are various other
locations in the verifier where only the id is cleared. By using
the helper we catch all current and future locations.
Fixes: 98d7ca374b ("bpf: Track delta between "linked" registers.")
Reported-by: STAR Labs SG <info@starlabs.sg>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260407192421.508817-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Consider the case of rX += rX where src_reg and dst_reg are pointers to
the same bpf_reg_state in adjust_reg_min_max_vals(). The latter first
modifies the dst_reg in-place, and later in the delta tracking, the
subsequent is_reg_const(src_reg)/reg_const_value(src_reg) reads the
post-{add,sub} value instead of the original source.
This is problematic since it sets an incorrect delta, which sync_linked_regs()
then propagates to linked registers, thus creating a verifier-vs-runtime
mismatch. Fix it by just skipping this corner case.
Fixes: 98d7ca374b ("bpf: Track delta between "linked" registers.")
Reported-by: STAR Labs SG <info@starlabs.sg>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20260407192421.508817-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Several GPON ONT SFP sticks based on Realtek RTL960x report
1000BASE-LX at 1300MBd in their EEPROM but can operate at 2500base-X.
On hosts capable of 2500base-X (e.g. Banana Pi R3 / MT7986), the
kernel negotiates only 1G because it trusts the incorrect EEPROM data.
Add quirks for:
- Hisense-Leox LXT-010S-H
- Hisense ZNID-GPON-2311NA
- HSGQ HSGQ-XPON-Stick
Each quirk advertises 2500base-X and ignores TX_FAULT during the
module's ~40s Linux boot time.
Tested on Banana Pi R3 (MT7986) with OpenWrt 25.12.1, confirmed
2.5Gbps link and full throughput with flow offloading.
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Suggested-by: Marcin Nita <marcin.nita@leolabs.pl>
Signed-off-by: John Pavlick <jspavlick@posteo.net>
Link: https://patch.msgid.link/20260406132321.72563-1-jspavlick@posteo.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, ath12k AHB (in IPQ5332) uses SCM calls to authenticate the
firmware image to bring up userpd. From IPQ5424 onwards, Q6 firmware can
directly communicate with the Trusted Management Engine - Lite (TME-L),
eliminating the need for SCM calls for userpd bring-up.
Hence, to enable IPQ5424 device support, use qcom_mdt_load_no_init() and
skip the SCM call as Q6 will directly authenticate the userpd firmware.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01243-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.6-01275-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ5424 hw1.0 AHB WLAN.WBE.1.6-01275-QCAHKSWPL_SILICONZ-1
Signed-off-by: Sowmiya Sree Elavalagan <sowmiya.elavalagan@oss.qualcomm.com>
Co-developed-by: Saravanakumar Duraisamy <quic_saradura@quicinc.com>
Signed-off-by: Saravanakumar Duraisamy <quic_saradura@quicinc.com>
Co-developed-by: Raj Kumar Bhagat <raj.bhagat@oss.qualcomm.com>
Signed-off-by: Raj Kumar Bhagat <raj.bhagat@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260407-ath12k-ipq5424-v5-6-8e96aa660ec4@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Add a new ath12k_hw_version_map entry for the AHB based WiFi 7 device
IPQ5424.
Reuse most of the ath12k_hw_version_map fields such as hal_ops,
hal_desc_sz, tcl_to_wbm_rbm_map, and hal_params from IPQ5332. The
register addresses differ on IPQ5424, hence set hw_regs temporarily
to NULL and populated it in a subsequent patch.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01243-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.6-01275-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ5424 hw1.0 AHB WLAN.WBE.1.6-01275-QCAHKSWPL_SILICONZ-1
Signed-off-by: Raj Kumar Bhagat <raj.bhagat@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260407-ath12k-ipq5424-v5-3-8e96aa660ec4@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Add ath12k_hw_params for the ath12k AHB-based WiFi 7 device IPQ5424.
The WiFi device IPQ5424 is similar to IPQ5332. Most of the hardware
parameters like hw_ops, wmi_init, ring_mask, etc., are the same between
IPQ5424 and IPQ5332, hence use these same parameters for IPQ5424.
Some parameters are specific to IPQ5424; initially set these to
0 or NULL, and populate them in subsequent patches.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01243-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ5332 hw1.0 AHB WLAN.WBE.1.6-01275-QCAHKSWPL_SILICONZ-1
Tested-on: IPQ5424 hw1.0 AHB WLAN.WBE.1.6-01275-QCAHKSWPL_SILICONZ-1
Signed-off-by: Saravanakumar Duraisamy <quic_saradura@quicinc.com>
Signed-off-by: Raj Kumar Bhagat <raj.bhagat@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260407-ath12k-ipq5424-v5-2-8e96aa660ec4@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Add the device-tree bindings for the ATH12K AHB wifi device IPQ5424.
Signed-off-by: Raj Kumar Bhagat <raj.bhagat@oss.qualcomm.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20260407-ath12k-ipq5424-v5-1-8e96aa660ec4@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Recent commit [1] moved station statistics collection to an earlier stage
of the disconnect flow. With this change in place, ath10k fails to resolve
the station entry when handling a peer stats event triggered during
disconnect, resulting in log messages such as:
wlp58s0: deauthenticating from 74:1a:e0:e7:b4:c8 by local choice (Reason: 3=DEAUTH_LEAVING)
ath10k_pci 0000:3a:00.0: not found station for peer stats
ath10k_pci 0000:3a:00.0: failed to parse stats info tlv: -22
The failure occurs because ath10k relies on ieee80211_find_sta_by_ifaddr()
for station lookup. That function uses local->sta_hash, but by the time
the peer stats request is triggered during disconnect, mac80211 has
already removed the station from that hash table, leading to lookup
failure.
Before commit [1], this issue was not visible because the transition from
IEEE80211_STA_NONE to IEEE80211_STA_NOTEXIST prevented ath10k from sending
a peer stats request at all: ath10k_mac_sta_get_peer_stats_info() would
fail early to find the peer and skip requesting statistics.
Fix this by switching the lookup path to ath10k_peer_find(), which queries
ath10k's internal peer table. At the point where the firmware emits the
peer stats event, the peer entry is still present in the driver's list,
ensuring lookup succeeds.
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00309-QCARMSWPZ-1
Fixes: a203dbeeca ("wifi: mac80211: collect station statistics earlier when disconnect") # [1]
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/ath10k/57671b89-ec9f-4e6c-992c-45eb8e75929c@molgen.mpg.de
Signed-off-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de>
Link: https://patch.msgid.link/20260325-ath10k-station-lookup-failure-v1-1-2e0c970f25d5@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
In single-wiphy design, when more than one radio is registered as a
single-wiphy in the mac80211 layer, the following warnings are seen:
1. debugfs: File 'ath12k' in directory 'phy0' already present!
2. debugfs: File 'simulate_fw_crash' in directory 'pci-0000:57:00.0' already present!
debugfs: File 'device_dp_stats' in directory 'pci-01777777777777777777777:57:00.0' already present!
When more than one radio is registered as a single-wiphy, symlinks for
all the radios are created in the same debugfs directory:
/sys/kernel/debug/ieee80211/phyX/ath12k, resulting in warning 1. When a
symlink is created for the first radio, since the 'ath12k' directory is
not present, it will be created and no warning will be thrown. But when
symlink is created for more than one radio, since the 'ath12k'
directory was already created for symlink for radio 1, a warning is
thrown complaining that 'ath12k' directory is already present. To resolve
warning 1, create symlink for each radio in separate debugfs directories.
For the first radio, the symlink will always be the 'ath12k' directory.
This ensures that the existing directory structure is retained for
single-wiphy and multi-wiphy architectures. In single-wiphy architecture
with multiple radios, create symlink in separate debugfs directories
introduced by mac80211.
Existing debugfs directory in single-wiphy architecture:
/sys/kernel/debug/ieee80211/phyX/ath12k is a symlink to
/sys/kernel/debug/ath12k/pci-0001:01:00.0/macY
Proposed debugfs directory in single-wiphy architecture with one radio:
/sys/kernel/debug/ieee80211/phyX/ath12k is a symlink to
/sys/kernel/debug/ath12k/pci-0001:01:00.0/mac0
Proposed debugfs directory in single-wiphy architecture with more than
one radio:
/sys/kernel/debug/ieee80211/phyX/radio0/ath12k is a symlink to
/sys/kernel/debug/ath12k/pci-0001:01:00.0/mac0 and
/sys/kernel/debug/ieee80211/phyX/radioY/ath12k is a symlink to
/sys/kernel/debug/ath12k/pci-0001:01:00.0/macY
Where X is phy index and Y is radio index, seen in
'iw phyX info | grep Idx'. Two symlinks for the first radio are to ensure
compatibility with the existing design. Add radio_idx inside ar, to track
the radio index in probing order.
API ath12k_debugfs_pdev_create() that creates SoC entries is called more
than once when hardware group starts up, resulting in warning 2. To
resolve this warning, remove all other calls to this API and add one
inside the ath12k_core_pdev_create(). This API carries all pdev-specific
initializations and can conveniently hold a call to
ath12k_debugfs_pdev_create().
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Co-developed-by: Harshitha Prem <harshitha.prem@oss.qualcomm.com>
Signed-off-by: Harshitha Prem <harshitha.prem@oss.qualcomm.com>
Signed-off-by: Roopni Devanathan <roopni.devanathan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260402051402.3903795-1-roopni.devanathan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Currently, a vdev that is created is considered active for partner link
population. In case of an MLD station, non-associated link vdevs can be
created but not started. Yet, they are added as partner links. This leads
to the creation of stale FW partner entries which accumulate and cause
assertions.
To resolve this issue, check if the vdev is started and operating on a
chosen frequency, i.e., arvif->is_started, instead of checking if the vdev
is created, i.e., arvif->is_created. This determines if the vdev is active
or not and skips adding it as a partner link if it's inactive.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.6-01181-QCAHKSWPL_SILICONZ-1
Signed-off-by: Avula Sri Charan <quic_asrichar@quicinc.com>
Signed-off-by: Roopni Devanathan <roopni.devanathan@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20260330040732.1847263-1-roopni.devanathan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
ath12k_ah_to_ar() is returning radio from the given hardware based on the
radio index passed. But, the variable that radio index is received at is
wrongly named 'hw_link_id', which points to the hardware link index that
comes from the firmware. This affects readability.
Resolve this by renaming 'hw_link_id' to 'radio_idx'.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1
Signed-off-by: Roopni Devanathan <roopni.devanathan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Link: https://patch.msgid.link/20260331045834.1181924-1-roopni.devanathan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Andrey Grodzovsky says:
====================
tracing: Fix kprobe attachment when module shadows vmlinux symbol
When a kernel module exports a symbol with the same name as an existing
vmlinux symbol, kprobe attachment fails with -EADDRNOTAVAIL because
number_of_same_symbols() counts matches across both vmlinux and all
loaded modules, returning a count greater than 1.
This series takes a different approach from v1-v4, which implemented a
libbpf-side fallback parsing /proc/kallsyms and retrying with the
absolute address. That approach was rejected (Andrii Nakryiko, Ihor
Solodrai) because ambiguous symbol resolution does not belong in libbpf.
Following Ihor's suggestion, this series fixes the root cause in the
kernel: when an unqualified symbol name is given and the symbol is found
in vmlinux, prefer the vmlinux symbol and do not scan loaded modules.
This makes the skeleton auto-attach path work transparently with no
libbpf changes needed.
Patch 1: Kernel fix - return vmlinux-only count from
number_of_same_symbols() when the symbol is found in vmlinux,
preventing module shadows from causing -EADDRNOTAVAIL.
Patch 2: Selftests using bpf_fentry_shadow_test which exists in both
vmlinux and bpf_testmod - tests unqualified (vmlinux) and
MOD:SYM (module) attachment across all four attach modes, plus
kprobe_multi with the duplicate symbol.
Changes since v6 [1]:
- Fix comment style: use /* on its own line instead of networking-style
/* text on opener line (Alexei Starovoitov).
[1] https://lore.kernel.org/bpf/20260407165145.1651061-1-andrey.grodzovsky@crowdstrike.com/
====================
Link: https://patch.msgid.link/20260407203912.1787502-1-andrey.grodzovsky@crowdstrike.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_fentry_shadow_test exists in both vmlinux (net/bpf/test_run.c) and
bpf_testmod (bpf_testmod.c), creating a duplicate symbol condition when
bpf_testmod is loaded. Add subtests that verify kprobe behavior with
this duplicate symbol:
In attach_probe:
- dup-sym-{default,legacy,perf,link}: unqualified attach succeeds
across all four modes, preferring vmlinux over module shadow.
- MOD:SYM qualification attaches to the module version.
In kprobe_multi_test:
- dup_sym: kprobe_multi attach with kprobe and kretprobe succeeds.
bpf_fentry_shadow_test is not invoked via test_run, so tests verify
attach and detach succeed without triggering the probe.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Link: https://lore.kernel.org/r/20260407203912.1787502-3-andrey.grodzovsky@crowdstrike.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When an unqualified kprobe target exists in both vmlinux and a loaded
module, number_of_same_symbols() returns a count greater than 1,
causing kprobe attachment to fail with -EADDRNOTAVAIL even though the
vmlinux symbol is unambiguous.
When no module qualifier is given and the symbol is found in vmlinux,
return the vmlinux-only count without scanning loaded modules. This
preserves the existing behavior for all other cases:
- Symbol only in a module: vmlinux count is 0, falls through to module
scan as before.
- Symbol qualified with MOD:SYM: mod != NULL, unchanged path.
- Symbol ambiguous within vmlinux itself: count > 1 is returned as-is.
Fixes: 926fe783c8 ("tracing/kprobes: Fix symbol counting logic by looking at modules as well")
Fixes: 9d8616034f ("tracing/kprobes: Add symbol counting check when module loads")
Suggested-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Link: https://lore.kernel.org/r/20260407203912.1787502-2-andrey.grodzovsky@crowdstrike.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add iter_buf_null_fail with two tests and a test runner:
- iter_buf_null_deref: verifier must reject direct dereference of
ctx->key (PTR_TO_BUF | PTR_MAYBE_NULL) without a null check
- iter_buf_null_check_ok: verifier must accept dereference after
an explicit null check
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Reviewed-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Qi Tang <tpluszz77@gmail.com>
Link: https://lore.kernel.org/r/20260407145421.4315-1-tpluszz77@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This gets the memory sizes from the nodes and stores the limit
as 50% of those. I think eventually we should drop the limits
once we have memcg aware shrinking, but this should be more NUMA
friendly, and I think seems like what people would prefer to
happen on NUMA aware systems.
Cc: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This enable NUMA awareness for the shrinker on the
ttm pools.
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
The list_lru will now handle numa for us, so no need to keep
separate pool types for it. Just consolidate into the global ones.
This adds a debugfs change to avoid dumping non-existant orders due
to this change.
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This is an initial port of the TTM pools for
write combined and uncached pages to use the list_lru.
This makes the pool's more NUMA aware and avoids
needing separate NUMA pools (later commit enables this).
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Dave Chinner <david@fromorbit.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
This uses the newly introduced per-node gpu tracking stats,
to track GPU memory allocated via TTM and reclaimable memory in
the TTM page pools.
These stats will be useful later for system information and
later when mem cgroups are integrated.
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: linux-mm@kvack.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
While discussing memcg intergration with gpu memory allocations,
it was pointed out that there was no numa/system counters for
GPU memory allocations.
With more integrated memory GPU server systems turning up, and
more requirements for memory tracking it seems we should start
closing the gap.
Add two counters to track GPU per-node system memory allocations.
The first is currently allocated to GPU objects, and the second
is for memory that is stored in GPU page pools that can be reclaimed,
by the shrinker.
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: linux-mm@kvack.org
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Zi Yan <ziy@nvidia.com>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When a CREATE returns STATUS_STOPPED_ON_SYMLINK, smb2_check_message()
returns success without any length validation, leaving the symlink
parsers as the only defense against an untrusted server.
symlink_data() walks SMB 3.1.1 error contexts with the loop test "p <
end", but reads p->ErrorId at offset 4 and p->ErrorDataLength at offset
0. When the server-controlled ErrorDataLength advances p to within 1-7
bytes of end, the next iteration will read past it. When the matching
context is found, sym->SymLinkErrorTag is read at offset 4 from
p->ErrorContextData with no check that the symlink header itself fits.
smb2_parse_symlink_response() then bounds-checks the substitute name
using SMB2_SYMLINK_STRUCT_SIZE as the offset of PathBuffer from
iov_base. That value is computed as sizeof(smb2_err_rsp) +
sizeof(smb2_symlink_err_rsp), which is correct only when
ErrorContextCount == 0.
With at least one error context the symlink data sits 8 bytes deeper,
and each skipped non-matching context shifts it further by 8 +
ALIGN(ErrorDataLength, 8). The check is too short, allowing the
substitute name read to run past iov_len. The out-of-bound heap bytes
are UTF-16-decoded into the symlink target and returned to userspace via
readlink(2).
Fix this all up by making the loops test require the full context header
to fit, rejecting sym if its header runs past end, and bound the
substitute name against the actual position of sym->PathBuffer rather
than a fixed offset.
Because sub_offs and sub_len are 16bits, the pointer math will not
overflow here with the new greater-than.
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Shyam Prasad N <sprasad@microsoft.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Bharath SM <bharathsm@microsoft.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Cc: stable <stable@kernel.org>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Assisted-by: gregkh_clanker_t1000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The bounds check uses (u8 *)ea + nlen + 1 + vlen as the end of the EA
name and value, but ea_data sits at offset sizeof(struct
smb2_file_full_ea_info) = 8 from ea, not at offset 0. The strncmp()
later reads ea->ea_data[0..nlen-1] and the value bytes follow at
ea_data[nlen+1..nlen+vlen], so the actual end is ea->ea_data + nlen + 1
+ vlen. Isn't pointer math fun?
The earlier check (u8 *)ea > end - sizeof(*ea) only guarantees the
8-byte header is in bounds, but since the last EA is placed within 8
bytes of the end of the response, the name and value bytes are read past
the end of iov.
Fix this mess all up by using ea->ea_data as the base for the bounds
check.
An "untrusted" server can use this to leak up to 8 bytes of kernel heap
into the EA name comparison and influence which WSL xattr the data is
interpreted as.
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Shyam Prasad N <sprasad@microsoft.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Bharath SM <bharathsm@microsoft.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Cc: stable <stable@kernel.org>
Assisted-by: gregkh_clanker_t1000
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When flushing out outstanding glock work during an unmount, gfs2_log_flush()
can be called when sdp->sd_jdesc has already been deallocated and sdp->sd_jdesc
is NULL. Commit 35264909e9 ("gfs2: Fix NULL pointer dereference in
gfs2_log_flush") added a check for that to gfs2_log_flush() itself, but it
missed the sdp->sd_jdesc dereference in gfs2_log_release(). Fix that.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202604071139.HNJiCaAi-lkp@intel.com/
Fixes: 35264909e9 ("gfs2: Fix NULL pointer dereference in gfs2_log_flush")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
