There is an existing comedi_request_region(dev, start, len) function
used by COMEDI drivers for legacy devices to request an I/O port region
starting at a specified base address (which must be non-zero) and with a
specified length. It uses request_region(). On success, it sets
dev->iobase and dev->iolen and returns 0. There is a alternative
function __comedi_request_region(dev, start, len) which does the same
thing without setting dev->iobase and dev->iolen.
Most hardware devices have restrictions on the allowed I/O port base
address and alignment, so add new functions
comedi_check_request_region(dev, start, len, minstart, maxend, minalign)
and __comedi_check_request_region(dev, start, len, minstart, maxend,
minalign) to perform these additional checks. Turn the original
functions into static inline wrapper functions that call the new
functions.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20260130170416.49994-2-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that all the bits are properly addressed, provide a mechanism
for testing ESA mode guests in nested configurations.
Signed-off-by: Hendrik Brueckner <brueckner@linux.ibm.com>
[farman@us.ibm.com: Updated commit message]
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
The prefix page address occupies a different number
of bits for z/Architecture versus ESA mode. Adjust the
definition to cover both, and permit an ESA mode
address within the nested codepath.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
In the event that a nested guest is put in ESA mode,
ensure that some bits are scrubbed from the shadow SCB.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Linux/KVM runs in z/Architecture-only mode. Although z/Architecture
is built upon a long history of hardware refinements, any other
CPU mode is not permitted.
Allow a userspace to explicitly enable the use of ESA mode for
nested guests, otherwise usage will be rejected.
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
"uapi/drm/vc4_drm.h" is already included through "vc4_drv.h". Therefore,
remove its direct inclusion from several files.
Suggested-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Link: https://patch.msgid.link/20260330-vc4-misc-fixes-v1-6-92defc940a29@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Switch from request_irq()/free_irq() to the device-managed alternative
devm_request_irq(), letting device-managed resource cleanup handle IRQ
teardown automatically.
While here, inline vc4_irq_prepare() into vc4_irq_install() since it's
the only caller.
Reviewed-by: Melissa Wen <mwen@igalia.com>
Link: https://patch.msgid.link/20260330-vc4-misc-fixes-v1-5-92defc940a29@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
The hotplug testing only tries reading a trace remote buffer, loaded
before a CPU is offline. Extend this testing to cover:
* A trace remote buffer loaded after a CPU is offline.
* A trace remote buffer loaded before a CPU is online.
Because of these added test cases, move the hotplug testing into a
separate hotplug.tc file.
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://patch.msgid.link/20260401045100.3394299-3-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
When a trace_buffer is created while a CPU is offline, this CPU is
cleared from the trace_buffer CPU mask, preventing the creation of a
non-consuming iterator (ring_buffer_iter). For trace remotes, it means
the iterator fails to be allocated (-ENOMEM) even though there are
available ring buffers in the trace_buffer.
For non-consuming reads of trace remotes, skip missing ring_buffer_iter
to allow reading the available ring buffers.
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Link: https://patch.msgid.link/20260401045100.3394299-2-vdonnefort@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
It is not necessary to update REG_RX_CPU_IDX register for each iteration
of the descriptor loop in airoha_qdma_fill_rx_queue routine.
Move REG_RX_CPU_IDX configuration out of the descriptor loop and rely on
the last queue head value updated in the descriptor loop.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260331-airoha-cpu-idx-out-off-loop-v1-1-75c66b428f50@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix a simple naming issue in the documentation: the completion
routine is called bi_end_io and not bi_complete.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20260401135854.125109-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Regression tests for the shared-block NULL derefs fixed in the previous
two patches:
- fw: attempt to attach an empty fw filter to a shared block and
verify the configuration is rejected with EINVAL.
- flow: create a flow filter on a shared block without a baseclass
and verify the configuration is rejected with EINVAL.
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Reviewed-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260331050217.504278-3-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
flow_change() calls tcf_block_q() and dereferences q->handle to derive
a default baseclass. Shared blocks leave block->q NULL, causing a NULL
deref when a flow filter without a fully qualified baseclass is created
on a shared block.
Check tcf_block_shared() before accessing block->q and return -EINVAL
for shared blocks. This avoids the null-deref shown below:
=======================================================================
KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f]
RIP: 0010:flow_change (net/sched/cls_flow.c:508)
Call Trace:
tc_new_tfilter (net/sched/cls_api.c:2432)
rtnetlink_rcv_msg (net/core/rtnetlink.c:6980)
[...]
=======================================================================
Fixes: 1abf272022 ("net: sched: tcindex, fw, flow: use tcf_block_q helper to get struct Qdisc")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260331050217.504278-2-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The old-method path in fw_classify() calls tcf_block_q() and
dereferences q->handle. Shared blocks leave block->q NULL, causing a
NULL deref when an empty cls_fw filter is attached to a shared block
and a packet with a nonzero major skb mark is classified.
Reject the configuration in fw_change() when the old method (no
TCA_OPTIONS) is used on a shared block, since fw_classify()'s
old-method path needs block->q which is NULL for shared blocks.
The fixed null-ptr-deref calling stack:
KASAN: null-ptr-deref in range [0x0000000000000038-0x000000000000003f]
RIP: 0010:fw_classify (net/sched/cls_fw.c:81)
Call Trace:
tcf_classify (./include/net/tc_wrapper.h:197 net/sched/cls_api.c:1764 net/sched/cls_api.c:1860)
tc_run (net/core/dev.c:4401)
__dev_queue_xmit (net/core/dev.c:4535 net/core/dev.c:4790)
Fixes: 1abf272022 ("net: sched: tcindex, fw, flow: use tcf_block_q helper to get struct Qdisc")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260331050217.504278-1-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When a bio is allocated from the mempool with REQ_ALLOC_CACHE set and
later completed, bio_put() places it into the per-cpu bio_alloc_cache
via bio_put_percpu_cache() instead of freeing it back to the
mempool/slab. The slab allocation remains tracked by kmemleak, but the
only reference to the bio is through the percpu cache's free_list,
which kmemleak fails to trace through percpu memory. This causes
kmemleak to report the cached bios as unreferenced objects.
Use symmetric kmemleak_free()/kmemleak_alloc() calls to properly track
bios across percpu cache transitions:
- bio_put_percpu_cache: call kmemleak_free() when a bio enters the
cache, unregistering it from kmemleak tracking.
- bio_alloc_percpu_cache: call kmemleak_alloc() when a bio is taken
from the cache for reuse, re-registering it so that genuine leaks
of reused bios remain detectable.
- __bio_alloc_cache_prune: call kmemleak_alloc() before bio_free() so
that kmem_cache_free()'s internal kmemleak_free() has a matching
allocation to pair with.
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://patch.msgid.link/20260326144058.2392319-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The following fix in sched/urgent:
e08d007f9d ("sched/debug: Fix avg_vruntime() usage")
is in conflict with this pending commit in sched/core:
4823725d9d ("sched/fair: Increase weight bits for avg_vruntime")
Both modify the same variable definition and initialization blocks,
resolve it by merging the two.
Conflicts:
kernel/sched/debug.c
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently, kvm_arch_vcpu_load() unconditionally restores guest CSRs,
HGATP, and AIA state. However, when a VCPU is loaded back on the same
physical CPU, and no other KVM VCPU has run on this CPU since it was
last put, the hardware CSRs and AIA registers are still valid.
This patch optimizes the vcpu_load path by skipping the expensive CSR
and AIA writes if all the following conditions are met:
1. It is being reloaded on the same CPU (vcpu->arch.last_exit_cpu == cpu).
2. The CSRs are not dirty (!vcpu->arch.csr_dirty).
3. No other VCPU used this CPU (vcpu == __this_cpu_read(kvm_former_vcpu)).
To ensure this fast-path doesn't break corner cases:
- Live migration and VCPU reset are naturally safe. KVM initializes
last_exit_cpu to -1, which guarantees the fast-path won't trigger.
- The 'csr_dirty' flag tracks runtime userspace interventions. If
userspace modifies guest configurations (e.g., hedeleg via
KVM_SET_GUEST_DEBUG, or CSRs including AIA via KVM_SET_ONE_REG),
the flag is set to skip the fast path.
With the 'csr_dirty' safeguard proven effective, it is safe to
include kvm_riscv_vcpu_aia_load() inside the skip logic now.
Signed-off-by: Jinyu Tang <tjytimi@163.com>
Reviewed-by: Nutty Liu <nutty.liu@hotmail.com>
Reviewed-by: Andrew Jones <andrew.jones@oss.qualcomm.com>
Reviewed-by: Radim Krčmář <radim.krcmar@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260227121008.442241-1-tjytimi@163.com
Signed-off-by: Anup Patel <anup@brainfault.org>
After commit a9165b83c1 ("io_uring/rw: always setup io_async_rw for
read/write requests") which moved the iovec allocation into the prep
path and stores it in req->async_data where it now gets freed as part of
the request lifecycle, this comment is now outdated.
Remove it and clean up the goto as well.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://patch.msgid.link/20260401173511.4052303-1-joannelkoong@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Buffers are now dma-mapped earlier and we can sg_dma_len(), otherwise,
since it's walking with for_each_sgtable_dma_sg(), it might wrongfully
reject some configurations. As a bonus, it'd now be able to use larger
chunks if dma addresses are coalesced e.g by iommu.
Fixes: 8c0cab0b7bf7 ("io_uring/zcrx: always dma map in advance")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/03b219af3f6cfdd1cf64679b8bab7461e47cc123.1774780198.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Now that area->is_mapped is set earlier before niovs array is allocated,
io_zcrx_free_area -> io_zcrx_unmap_area in an error path can try to
clear dma addresses for unallocated niovs, fix it.
Fixes: 8c0cab0b7bf7 ("io_uring/zcrx: always dma map in advance")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://patch.msgid.link/cbcb7749b5a001ecd4d1c303515ce9403215640c.1774780198.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In the SDSP probe path, qcom_scm_assign_mem() is used to assign the
reserved memory to the configured VMIDs, but its return value was not checked.
Fail the probe if the SCM call fails to avoid continuing with an
unexpected/incorrect memory permission configuration.
This issue was found by an in-house analysis workflow that extracts AST-based
information and runs static checks, with LLM assistance for triage, and was
confirmed by manual code review.
No hardware testing was performed.
Fixes: c3c0363bc7 ("misc: fastrpc: support complete DMA pool access to the DSP")
Cc: stable@vger.kernel.org # 6.11-rc1
Signed-off-by: Xingjing Deng <xjdeng@buaa.edu.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260131065539.2124047-1-xjdeng@buaa.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fastrpc_init_create_static_process() may free cctx->remote_heap on the
err_map path but does not clear the pointer. Later, fastrpc_rpmsg_remove()
frees cctx->remote_heap again if it is non-NULL, which can lead to a
double-free if the INIT_CREATE_STATIC ioctl hits the error path and the rpmsg
device is subsequently removed/unbound.
Clear cctx->remote_heap after freeing it in the error path to prevent the
later cleanup from freeing it again.
This issue was found by an in-house analysis workflow that extracts AST-based
information and runs static checks, with LLM assistance for triage, and was
confirmed by manual code review.
No hardware testing was performed.
Fixes: 0871561055 ("misc: fastrpc: Add support for audiopd")
Cc: stable@vger.kernel.org # 6.2+
Signed-off-by: Xingjing Deng <xjdeng@buaa.edu.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260129234140.410983-1-xjdeng@buaa.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
syzbot reported a memory leak [1], because commit 4e1da516de ("comedi:
Add reference counting for Comedi command handling") did not consider
the exceptional exit case in do_cmd_ioctl() where runflags is not set.
This caused chanlist not to be properly freed by do_become_nonbusy(),
as it only frees chanlist when runflags is correctly set.
Added a check in do_become_nonbusy() for the case where runflags is not
set, to properly free the chanlist memory.
[1]
BUG: memory leak
backtrace (crc 844a0efa):
__comedi_get_user_chanlist drivers/comedi/comedi_fops.c:1815 [inline]
do_cmd_ioctl.part.0+0x112/0x350 drivers/comedi/comedi_fops.c:1890
do_cmd_ioctl drivers/comedi/comedi_fops.c:1858 [inline]
Fixes: 4e1da516de ("comedi: Add reference counting for Comedi command handling")
Reported-by: syzbot+f238baf6ded841b5a82e@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f238baf6ded841b5a82e
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: stable <stable@kernel.org> # 6.19
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20260310111104.70959-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`struct comedi_device` is the main controlling structure for a COMEDI
device created by the COMEDI subsystem. It contains a member `spinlock`
containing a spin-lock that is initialized by the COMEDI subsystem, but
is reserved for use by a low-level driver attached to the COMEDI device
(at least since commit 25436dc9d8 ("Staging: comedi: remove RT
code")).
Some COMEDI devices (those created on initialization of the COMEDI
subsystem when the "comedi.comedi_num_legacy_minors" parameter is
non-zero) can be attached to different low-level drivers over their
lifetime using the `COMEDI_DEVCONFIG` ioctl command. This can result in
inconsistent lock states being reported when there is a mismatch in the
spin-lock locking levels used by each low-level driver to which the
COMEDI device has been attached. Fix it by reinitializing
`dev->spinlock` before calling the low-level driver's `attach` function
pointer if `CONFIG_LOCKDEP` is enabled.
Reported-by: syzbot+cc9f7f4a7df09f53c4a4@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=cc9f7f4a7df09f53c4a4
Fixes: ed9eccbe89 ("Staging: add comedi core")
Cc: stable <stable@kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20260225132427.86578-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`me2600_xilinx_download()` loads the firmware that was requested by
`request_firmware()`. It is possible for it to overrun the source
buffer because it blindly trusts the file format. It reads a data
stream length from the first 4 bytes into variable `file_length` and
reads the data stream contents of length `file_length` from offset 16
onwards. Although it checks that the supplied firmware is at least 16
bytes long, it does not check that it is long enough to contain the data
stream.
Add a test to ensure that the supplied firmware is long enough to
contain the header and the data stream. On failure, log an error and
return `-EINVAL`.
Fixes: 85acac6109 ("Staging: comedi: add me_daq driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20260205140130.76697-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
`me4000_xilinx_download()` loads the firmware that was requested by
`request_firmware()`. It is possible for it to overrun the source
buffer because it blindly trusts the file format. It reads a data
stream length from the first 4 bytes into variable `file_length` and
reads the data stream contents of length `file_length` from offset 16
onwards.
Add a test to ensure that the supplied firmware is long enough to
contain the header and the data stream. On failure, log an error and
return `-EINVAL`.
Note: The firmware loading was totally broken before commit ac584af599
("staging: comedi: me4000: fix firmware downloading"), but that is the
most sensible target for this fix.
Fixes: ac584af599 ("staging: comedi: me4000: fix firmware downloading")
Cc: stable <stable@kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20260205133949.71722-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the driver's COMEDI "attach" handler function (`atmio16d_attach()`)
returns an error, the COMEDI core will call the driver's "detach"
handler function (`atmio16d_detach()`) to clean up. This calls
`reset_atmio16d()` unconditionally, but depending on where the error
occurred in the attach handler, the device may not have been
sufficiently initialized to call `reset_atmio16d()`. It uses
`dev->iobase` as the I/O port base address and `dev->private` as the
pointer to the COMEDI device's private data structure. `dev->iobase`
may still be set to its initial value of 0, which would result in
undesired writes to low I/O port addresses. `dev->private` may still be
`NULL`, which would result in null pointer dereferences.
Fix `atmio16d_detach()` by checking that `dev->private` is valid
(non-null) before calling `reset_atmio16d()`. This implies that
`dev->iobase` was set correctly since that is set up before
`dev->private`.
Fixes: 2323b27630 ("Staging: comedi: add ni_at_atmio16d driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://patch.msgid.link/20260128150011.5006-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The IBRD, IBWRT, IBCMD, and IBWAIT ioctl handlers use a gpib_descriptor
pointer after board->big_gpib_mutex has been released. A concurrent
IBCLOSEDEV ioctl can free the descriptor via close_dev_ioctl() during
this window, causing a use-after-free.
The IO handlers (read_ioctl, write_ioctl, command_ioctl) explicitly
release big_gpib_mutex before calling their handler. wait_ioctl() is
called with big_gpib_mutex held, but ibwait() releases it internally
when wait_mask is non-zero. In all four cases, the descriptor pointer
obtained from handle_to_descriptor() becomes unprotected.
Fix this by introducing a kernel-only descriptor_busy reference count
in struct gpib_descriptor. Each handler atomically increments
descriptor_busy under file_priv->descriptors_mutex before releasing the
lock, and decrements it when done. close_dev_ioctl() checks
descriptor_busy under the same lock and rejects the close with -EBUSY
if the count is non-zero.
A reference count rather than a simple flag is necessary because
multiple handlers can operate on the same descriptor concurrently
(e.g. IBRD and IBWAIT on the same handle from different threads).
A separate counter is needed because io_in_progress can be cleared from
unprivileged userspace via the IBWAIT ioctl (through general_ibstatus()
with set_mask containing CMPL), which would allow an attacker to bypass
a check based solely on io_in_progress. The new descriptor_busy
counter is only modified by the kernel IO paths.
The lock ordering is consistent (big_gpib_mutex -> descriptors_mutex)
and the handlers only hold descriptors_mutex briefly during the lookup,
so there is no deadlock risk and no impact on IO throughput.
Signed-off-by: Adam Crosser <adam.crosser@praetorian.com>
Cc: stable <stable@kernel.org>
Reviewed-by: Dave Penkler <dpenkler@gmail.com>
Tested-by: Dave Penkler <dpenkler@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver iterates over the registered USB interfaces during GPIB
attach and takes a reference to their USB devices until a match is
found. These references are never released which leads to a memory leak
when devices are disconnected.
Fix the leak by dropping the unnecessary references.
Fixes: fce79512a9 ("staging: gpib: Add LPVO DIY USB GPIB driver")
Cc: stable <stable@kernel.org> # 6.13
Cc: Dave Penkler <dpenkler@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260310105127.17538-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The following errors were reported for a s390 randconfig build
of the fluke gpib driver:
>> drivers/gpib/eastwood/fluke_gpib.c:1002:23: error: call to undeclared function 'ioremap'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
1002 | nec_priv->mmiobase = ioremap(e_priv->gpib_iomem_res->start,
| ^
>> drivers/gpib/eastwood/fluke_gpib.c:1002:21: error: incompatible integer to pointer conversion assigning to 'void *' from 'int' [-Wint-conversion]
1002 | nec_priv->mmiobase = ioremap(e_priv->gpib_iomem_res->start,
| ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1003 | resource_size(e_priv->gpib_iomem_res));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpib/eastwood/fluke_gpib.c:1036:33: error: incompatible integer to pointer conversion assigning to 'void *' from 'int' [-Wint-conversion]
1036 | e_priv->write_transfer_counter = ioremap(e_priv->write_transfer_counter_res->start,
| ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1037 | resource_size(e_priv->write_transfer_counter_res));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Add HAS_IOMEM dependency to Kconfig for fluke driver option
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601221748.AFAqHieJ-lkp@intel.com/
Fixes: baf8855c91 ("staging: gpib: fix address space mixup")
Cc: stable <stable@kernel.org>
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://patch.msgid.link/20260202094755.4259-1-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Auto counter reload may have a group of events with software events
present within it. The software event PMU isn't the x86_hybrid_pmu and
a container_of operation in intel_pmu_set_acr_caused_constr (via the
hybrid helper) could cause out of bound memory reads. Avoid this by
guarding the call to intel_pmu_set_acr_caused_constr with an
is_x86_event check.
Fixes: ec980e4fac ("perf/x86/intel: Support auto counter reload")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Thomas Falcon <thomas.falcon@intel.com>
Link: https://patch.msgid.link/20260312194305.1834035-1-irogers@google.com
John reported that stress-ng-yield could make his machine unhappy and
managed to bisect it to commit b3d99f43c7 ("sched/fair: Fix
zero_vruntime tracking").
The commit in question changes avg_vruntime() from a function that is
a pure reader, to a function that updates variables. This turns an
unlocked sched/debug usage of this function from a minor mistake into
a data corruptor.
Fixes: af4cf40470 ("sched/fair: Add cfs_rq::avg_vruntime")
Fixes: b3d99f43c7 ("sched/fair: Fix zero_vruntime tracking")
Reported-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260401132355.196370805@infradead.org
John reported that stress-ng-yield could make his machine unhappy and
managed to bisect it to commit b3d99f43c7 ("sched/fair: Fix
zero_vruntime tracking").
The combination of yield and that commit was specific enough to
hypothesize the following scenario:
Suppose we have 2 runnable tasks, both doing yield. Then one will be
eligible and one will not be, because the average position must be in
between these two entities.
Therefore, the runnable task will be eligible, and be promoted a full
slice (all the tasks do is yield after all). This causes it to jump over
the other task and now the other task is eligible and current is no
longer. So we schedule.
Since we are runnable, there is no {de,en}queue. All we have is the
__{en,de}queue_entity() from {put_prev,set_next}_task(). But per the
fingered commit, those two no longer move zero_vruntime.
All that moves zero_vruntime are tick and full {de,en}queue.
This means, that if the two tasks playing leapfrog can reach the
critical speed to reach the overflow point inside one tick's worth of
time, we're up a creek.
Additionally, when multiple cgroups are involved, there is no guarantee
the tick will in fact hit every cgroup in a timely manner. Statistically
speaking it will, but that same statistics does not rule out the
possibility of one cgroup not getting a tick for a significant amount of
time -- however unlikely.
Therefore, just like with the yield() case, force an update at the end
of every slice. This ensures the update is never more than a single
slice behind and the whole thing is within 2 lag bounds as per the
comment on entity_key().
Fixes: b3d99f43c7 ("sched/fair: Fix zero_vruntime tracking")
Reported-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: John Stultz <jstultz@google.com>
Link: https://patch.msgid.link/20260401132355.081530332@infradead.org
Martin Schiller says:
====================
net/x25: Fix overflow and double free
This patch set includes 2 fixes:
The first removes a potential double free of received skb
The second fixes an overflow when accumulating packets with the more-bit
set.
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
====================
Link: https://patch.msgid.link/20260331-x25_fraglen-v4-0-3e69f18464b4@dev.tdt.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a check to ensure that `x25_sock.fraglen` does not overflow.
The `fraglen` also needs to be resetted when purging `fragment_queue` in
`x25_clear_queues()`.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Suggested-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://patch.msgid.link/20260331-x25_fraglen-v4-2-3e69f18464b4@dev.tdt.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When alloc_skb fails in x25_queue_rx_frame it calls kfree_skb(skb) at
line 48 and returns 1 (error).
This error propagates back through the call chain:
x25_queue_rx_frame returns 1
|
v
x25_state3_machine receives the return value 1 and takes the else
branch at line 278, setting queued=0 and returning 0
|
v
x25_process_rx_frame returns queued=0
|
v
x25_backlog_rcv at line 452 sees queued=0 and calls kfree_skb(skb)
again
This would free the same skb twice. Looking at x25_backlog_rcv:
net/x25/x25_in.c:x25_backlog_rcv() {
...
queued = x25_process_rx_frame(sk, skb);
...
if (!queued)
kfree_skb(skb);
}
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Link: https://patch.msgid.link/20260331-x25_fraglen-v4-1-3e69f18464b4@dev.tdt.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Jeremy Kerr says:
====================
net: mctp: improvements for NULL-EID addressing
Currently, our focus for the MCTP routing implementation has been for
MCTP bus-owner devices. In this case, we will generally have an EID
assigned during local transmit, and have routes established before
expecting to receive.
We also want to handle non-bus-owner cases, where:
- we may need to send control protocol messages (like Discovery Notify)
before any local addresses have been assigned, particularly as part
of acquiring a local address assignment; and
- we will likely want to receive incoming messages before we have
routing established.
This series improves handling for these cases, by handling NULL EIDs
as source / destination addresses where possible.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
====================
Link: https://patch.msgid.link/20260331-dev-mctp-null-eids-v1-0-b4d047372eaf@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, if we receive a physically-addressed packet for the local
stack, we perform a route_lookup_null to find a matching device-based
route. If a route is present, it will always have the ->output fn set to
mctp_dst_input, which provides our delivery mechanism.
However, if we don't yet have any local addresses assigned, we won't
have any local routes to lookup, so this will fail. One of the use-cases
for physical addressing is initial address assignment on endpoint nodes,
where we would have no addresses, and therefore no local routes.
Instead of iterating routes (looking for one matching the dev), just
create a suitable mctp_dst for the device directly.
Add a testcase for the no-route case too.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20260331-dev-mctp-null-eids-v1-3-b4d047372eaf@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If we're operating as a non-bus-owner endpoint, we may want to perform
MCTP communication to get an address assigned. In this case, we'll have
no local addresses, but can TX just fine either with extended routing,
or where a direct route exists.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20260331-dev-mctp-null-eids-v1-2-b4d047372eaf@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Rather than querying the output device for its address in
mctp_local_output, set up the source address when we're populating the
dst structure. If no address is assigned, use MCTP_ADDR_NULL.
This will allow us more flexibility when routing for NULL-source-eid
cases. For now though, we still reject a NULL source address in the
output path.
We need to update the tests a little, so that addresses are assigned
before we do the dst lookups.
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20260331-dev-mctp-null-eids-v1-1-b4d047372eaf@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Here are some new modem and io_edgeport device ids.
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iJEEABYKADkWIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCac47RhsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDIACgkQC8XNwux9ZQj6ogD+J7RkeU4bfuFIJVYjDlZD
mY8ocNFYW62JJAE1ItNwkQcA/3YYUjmFTDZMCV3HtJsdqqVvFCDOo8Mv4Es1k2GJ
OicD
=dd+4
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-7.0-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB serial device ids for 7.0-rc7
Here are some new modem and io_edgeport device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-7.0-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: option: add MeiG Smart SRM825WN
USB: serial: io_edgeport: add support for Blackbox IC135A
USB: serial: option: add support for Rolling Wireless RW135R-GL
The mmap callback reads bo->madv without holding madv_lock, racing with
concurrent DRM_IOCTL_VC4_GEM_MADVISE calls that modify the field under
the same lock. Add the missing locking to prevent the data race.
Fixes: b9f19259b8 ("drm/vc4: Add the DRM_IOCTL_VC4_GEM_MADVISE ioctl")
Reviewed-by: Melissa Wen <mwen@igalia.com>
Link: https://patch.msgid.link/20260330-vc4-misc-fixes-v1-4-92defc940a29@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
When vc4_save_hang_state() encounters an early return condition, it
returns without freeing the previously allocated `kernel_state`,
leaking memory.
Add the missing kfree() calls by consolidating the early return paths
into a single place.
Fixes: 214613656b ("drm/vc4: Add an interface for capturing the GPU state after a hang.")
Reviewed-by: Melissa Wen <mwen@igalia.com>
Link: https://patch.msgid.link/20260330-vc4-misc-fixes-v1-3-92defc940a29@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
The hang state's BO array is allocated separately with kzalloc() in
vc4_save_hang_state() but never freed in vc4_free_hang_state(). Add the
missing kfree() for the BO array before freeing the hang state struct.
Fixes: 214613656b ("drm/vc4: Add an interface for capturing the GPU state after a hang.")
Reviewed-by: Melissa Wen <mwen@igalia.com>
Link: https://patch.msgid.link/20260330-vc4-misc-fixes-v1-2-92defc940a29@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
The vc4_v3d_bind() function acquires a runtime PM reference via
pm_runtime_resume_and_get() to access V3D registers during setup.
However, this reference is never released after a successful bind.
This prevents the device from ever runtime suspending, since the
reference count never reaches zero.
Release the runtime PM reference by adding pm_runtime_put_autosuspend()
after autosuspend is configured, allowing the device to runtime suspend
after the delay.
Fixes: 266cff37d7 ("drm/vc4: v3d: Rework the runtime_pm setup")
Reviewed-by: Melissa Wen <mwen@igalia.com>
Link: https://patch.msgid.link/20260330-vc4-misc-fixes-v1-1-92defc940a29@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
It(ID 31b2:0111 JU Jiu) reports a MIN value -12800 for volume control, but
will mute when setting it less than -10880.
Thanks to my girlfriend Kagura for reporting this issue.
Cc: Kagura <me@mail.kagurach.uk>
Cc: stable@vger.kernel.org
Signed-off-by: Cryolitia PukNgae <cryolitia.pukngae@linux.dev>
Link: https://patch.msgid.link/20260402-syy-v1-1-068d3bc30ddc@linux.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
