The F81214E is a LPC/eSPI to 2 UART Super I/O chip.
Functionally, it is the same as the F81216E. The only difference
is that the F81216E has 4 UART ports, whereas the F81214E has 2
UART ports.
Signed-off-by: Ravi Rama <ravi.rama@nexthop.ai>
Link: https://patch.msgid.link/20260313194731.2671-1-ravi.rama@nexthop.ai
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The net_device is allocated during function instance creation and
registered during the bind phase with the gadget device as its sysfs
parent. When the function unbinds, the parent device is destroyed, but
the net_device survives, resulting in dangling sysfs symlinks:
console:/ # ls -l /sys/class/net/usb0
lrwxrwxrwx ... /sys/class/net/usb0 ->
/sys/devices/platform/.../gadget.0/net/usb0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0
ls: .../gadget.0/net/usb0: No such file or directory
Use device_move() to reparent the net_device between the gadget device
tree and /sys/devices/virtual across bind and unbind cycles. During the
final unbind, calling device_move(NULL) moves the net_device to the
virtual device tree before the gadget device is destroyed. On rebinding,
device_move() reparents the device back under the new gadget, ensuring
proper sysfs topology and power management ordering.
To maintain compatibility with legacy composite drivers (e.g., multi.c),
the borrowed_net flag is used to indicate whether the network device is
shared and pre-registered during the legacy driver's bind phase.
Fixes: f466c63538 ("usb: gadget: f_rndis: convert to new function interface with backward compatibility")
Cc: stable@vger.kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260320-usb-net-lifecycle-v1-7-4886b578161b@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The net_device is allocated during function instance creation and
registered during the bind phase with the gadget device as its sysfs
parent. When the function unbinds, the parent device is destroyed, but
the net_device survives, resulting in dangling sysfs symlinks:
console:/ # ls -l /sys/class/net/usb0
lrwxrwxrwx ... /sys/class/net/usb0 ->
/sys/devices/platform/.../gadget.0/net/usb0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0
ls: .../gadget.0/net/usb0: No such file or directory
Use device_move() to reparent the net_device between the gadget device
tree and /sys/devices/virtual across bind and unbind cycles. During the
final unbind, calling device_move(NULL) moves the net_device to the
virtual device tree before the gadget device is destroyed. On rebinding,
device_move() reparents the device back under the new gadget, ensuring
proper sysfs topology and power management ordering.
To maintain compatibility with legacy composite drivers (e.g., multi.c),
the bound flag is used to indicate whether the network device is shared
and pre-registered during the legacy driver's bind phase.
Fixes: 8cedba7c73 ("usb: gadget: f_subset: convert to new function interface with backward compatibility")
Cc: stable@vger.kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260320-usb-net-lifecycle-v1-6-4886b578161b@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The net_device is allocated during function instance creation and
registered during the bind phase with the gadget device as its sysfs
parent. When the function unbinds, the parent device is destroyed, but
the net_device survives, resulting in dangling sysfs symlinks:
console:/ # ls -l /sys/class/net/usb0
lrwxrwxrwx ... /sys/class/net/usb0 ->
/sys/devices/platform/.../gadget.0/net/usb0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0
ls: .../gadget.0/net/usb0: No such file or directory
Use device_move() to reparent the net_device between the gadget device
tree and /sys/devices/virtual across bind and unbind cycles. During the
final unbind, calling device_move(NULL) moves the net_device to the
virtual device tree before the gadget device is destroyed. On rebinding,
device_move() reparents the device back under the new gadget, ensuring
proper sysfs topology and power management ordering.
To maintain compatibility with legacy composite drivers (e.g., multi.c),
the bound flag is used to indicate whether the network device is shared
and pre-registered during the legacy driver's bind phase.
Fixes: b29002a157 ("usb: gadget: f_eem: convert to new function interface with backward compatibility")
Cc: stable@vger.kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260320-usb-net-lifecycle-v1-5-4886b578161b@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The net_device is allocated during function instance creation and
registered during the bind phase with the gadget device as its sysfs
parent. When the function unbinds, the parent device is destroyed, but
the net_device survives, resulting in dangling sysfs symlinks:
console:/ # ls -l /sys/class/net/usb0
lrwxrwxrwx ... /sys/class/net/usb0 ->
/sys/devices/platform/.../gadget.0/net/usb0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0
ls: .../gadget.0/net/usb0: No such file or directory
Use device_move() to reparent the net_device between the gadget device
tree and /sys/devices/virtual across bind and unbind cycles. During the
final unbind, calling device_move(NULL) moves the net_device to the
virtual device tree before the gadget device is destroyed. On rebinding,
device_move() reparents the device back under the new gadget, ensuring
proper sysfs topology and power management ordering.
To maintain compatibility with legacy composite drivers (e.g., multi.c),
the bound flag is used to indicate whether the network device is shared
and pre-registered during the legacy driver's bind phase.
Fixes: fee562a645 ("usb: gadget: f_ecm: convert to new function interface with backward compatibility")
Cc: stable@vger.kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260320-usb-net-lifecycle-v1-4-4886b578161b@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The class/subclass/protocol options are suspectible to race conditions
as they can be accessed concurrently through configfs.
Use existing mutex to protect these options. This issue was identified
during code inspection.
Fixes: 73517cf49b ("usb: gadget: add RNDIS configfs options for class/subclass/protocol")
Cc: stable@vger.kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260320-usb-net-lifecycle-v1-2-4886b578161b@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
geth_alloc() increments the reference count, but geth_free() fails to
decrement it. This prevents the configuration of attributes via configfs
after unlinking the function.
Decrement the reference count in geth_free() to ensure proper cleanup.
Fixes: 02832e56f8 ("usb: gadget: f_subset: add configfs support")
Cc: stable@vger.kernel.org
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260320-usb-net-lifecycle-v1-1-4886b578161b@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When Power Delivery is not supported, the source is unable to obtain the
current capability from the Source PDO. As a result, typec-power-opmode
needs to be added to advertise such capability.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260330063518.719345-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the current implementation, if a cable's alternate mode enter operation
is not supported, the tbt->plug[TYPEC_PLUG_SOP_P] pointer is cleared by the
time tbt_enter_mode() is called. This prevents the driver from identifying
the cable's VDO.
As a result, the Thunderbolt connection falls back to the default
TBT_CABLE_USB3_PASSIVE speed, even if the cable supports higher speeds.
To ensure the correct VDO value is used during mode entry, calculate and
store the enter_vdo earlier during the initialization phase in tbt_ready().
Cc: stable <stable@kernel.org>
Fixes: 100e257386 ("usb: typec: Add driver for Thunderbolt 3 Alternate Mode")
Tested-by: Madhu M <madhu.m@intel.corp-partner.google.com>
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://patch.msgid.link/20260324103012.1417616-1-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The typec plug alternate mode is already registered as part of the bus.
When both class and bus are set for a device, device_add() attempts to
create the "subsystem" symlink in the device's sysfs directory twice, once
for the bus and once for the class.
This results in a duplicate filename error during registration,
causing the alternate mode registration to fail with warnings:
cannot create duplicate filename '/devices/pci0000:00/0000:00:1f.0/
PNP0C09:00/GOOG0004:00/cros-ec-dev.1.auto/cros_ec_ucsi.3.auto/typec/
port1/port1-cable/port1-plug0/port1-plug0.0/subsystem'
typec port0-plug0: failed to register alternate mode (-17)
cros_ec_ucsi.3.auto: failed to registers svid 0x8087 mode 1
Cc: stable <stable@kernel.org>
Fixes: 67ab454262 ("usb: typec: Set the bus also for the port and plug altmodes")
Tested-by: Madhu M <madhu.m@intel.corp-partner.google.com>
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://patch.msgid.link/20260324102903.1416210-1-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dwc2_gadget_exit_clock_gating() internally calls call_gadget() macro,
which expects hsotg->lock to be held since it does spin_unlock/spin_lock
around the gadget driver callback invocation.
However, dwc2_hsotg_udc_stop() calls dwc2_gadget_exit_clock_gating()
without holding the lock. This leads to:
- spin_unlock on a lock that is not held (undefined behavior)
- The lock remaining held after dwc2_gadget_exit_clock_gating() returns,
causing a deadlock when spin_lock_irqsave() is called later in the
same function.
Fix this by acquiring hsotg->lock before calling
dwc2_gadget_exit_clock_gating() and releasing it afterwards, which
satisfies the locking requirement of the call_gadget() macro.
Fixes: af076a41f8 ("usb: dwc2: also exit clock_gating when stopping udc while suspended")
Cc: stable <stable@kernel.org>
Signed-off-by: Juno Choi <juno.choi@lge.com>
Link: https://patch.msgid.link/20260324014910.2798425-1-juno.choi@lge.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit b81ac4395b ("usb: gadget: uvc: allow for application to cleanly
shutdown") introduced two stages of synchronization waits totaling 1500ms
in uvc_function_unbind() to prevent several types of kernel panics.
However, this timing-based approach is insufficient during power
management (PM) transitions.
When the PM subsystem starts freezing user space processes, the
wait_event_interruptible_timeout() is aborted early, which allows the
unbind thread to proceed and nullify the gadget pointer
(cdev->gadget = NULL):
[ 814.123447][ T947] configfs-gadget.g1 gadget.0: uvc: uvc_function_unbind()
[ 814.178583][ T3173] PM: suspend entry (deep)
[ 814.192487][ T3173] Freezing user space processes
[ 814.197668][ T947] configfs-gadget.g1 gadget.0: uvc: uvc_function_unbind no clean disconnect, wait for release
When the PM subsystem resumes or aborts the suspend and tasks are
restarted, the V4L2 release path is executed and attempts to access the
already nullified gadget pointer, triggering a kernel panic:
[ 814.292597][ C0] PM: pm_system_irq_wakeup: 479 triggered dhdpcie_host_wake
[ 814.386727][ T3173] Restarting tasks ...
[ 814.403522][ T4558] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000030
[ 814.404021][ T4558] pc : usb_gadget_deactivate+0x14/0xf4
[ 814.404031][ T4558] lr : usb_function_deactivate+0x54/0x94
[ 814.404078][ T4558] Call trace:
[ 814.404080][ T4558] usb_gadget_deactivate+0x14/0xf4
[ 814.404083][ T4558] usb_function_deactivate+0x54/0x94
[ 814.404087][ T4558] uvc_function_disconnect+0x1c/0x5c
[ 814.404092][ T4558] uvc_v4l2_release+0x44/0xac
[ 814.404095][ T4558] v4l2_release+0xcc/0x130
Address the race condition and NULL pointer dereference by:
1. State Synchronization (flag + mutex)
Introduce a 'func_unbound' flag in struct uvc_device. This allows
uvc_function_disconnect() to safely skip accessing the nullified
cdev->gadget pointer. As suggested by Alan Stern, this flag is protected
by a new mutex (uvc->lock) to ensure proper memory ordering and prevent
instruction reordering or speculative loads. This mutex is also used to
protect 'func_connected' for consistent state management.
2. Explicit Synchronization (completion)
Use a completion to synchronize uvc_function_unbind() with the
uvc_vdev_release() callback. This prevents Use-After-Free (UAF) by
ensuring struct uvc_device is freed after all video device resources
are released.
Fixes: b81ac4395b ("usb: gadget: uvc: allow for application to cleanly shutdown")
Cc: stable <stable@kernel.org>
Suggested-by: Alan Stern <stern@rowland.harvard.edu>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jimmy Hu <hhhuuu@google.com>
Link: https://patch.msgid.link/20260320065427.1374555-1-hhhuuu@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Another Silicon Motion flash drive also randomly work incorrectly
(lsusb does not list the device) on Huawei hisi platforms during
500 reboot cycles, and the DELAY_INIT quirk fixes this issue.
Signed-off-by: Miao Li <limiao@kylinos.cn>
Cc: stable <stable@kernel.org>
Link: https://patch.msgid.link/20260319053927.264840-1-limiao870622@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
echi_brcm_wait_for_sof() gets called after disabling interrupts
in ehci_brcm_hub_control(). Use the atomic version of poll_timeout
to fix the warning.
Fixes: 9df231511b ("usb: ehci: Add new EHCI driver for Broadcom STB SoC's")
Cc: stable <stable@kernel.org>
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260318185707.2588431-1-justin.chen@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Winbond w25q256jw device:
- Supports lock/unlock via SR.
- Has Top/Bottom (TB) protect bit.
- Uses Status Register bit 6 as the Top/Bottom (TB) protect bit.
- Supports four Block Protect (BP) bits.
Update the flash parameters by enabling SPI_NOR_HAS_LOCK, SPI_NOR_HAS_TB,
SPI_NOR_TB_SR_BIT6 and SPI_NOR_4BIT_BP. Without these flags, the locking
configuration is incorrect.
Reference:
https://www.winbond.com/hq/support/documentation/levelOne.jsp?__locale=en&DocNo=DA00-W25Q256JW.1
Signed-off-by: Eliav Farber <farbere@amazon.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav (Google) <pratyush@kernel.org>
TCPCI maxim driver directly writes to the charger's register space to
set charger mode depending on the power role. As MAX77759 chg driver
exists, this WAR is not required.
Instead, use a regulator interface to source vbus when typec is in
source power mode. In other power modes, this regulator will be turned
off if active.
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260325-max77759-charger-v9-6-4486dd297adc@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for MAX77759 battery charger driver. This is a 4A 1-Cell
Li+/LiPoly dual input switch mode charger. While the device can support
USB & wireless charger inputs, this implementation only supports USB
input. This implementation supports both buck and boost modes.
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260325-max77759-charger-v9-5-4486dd297adc@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a helper function to find the selector for a given value in a linear
range array. The selector should be such that the value it represents
should be higher or equal to the given value.
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20260325-max77759-charger-v9-4-4486dd297adc@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add register bitmasks for charger function.
In addition split the charger IRQs further such that each bit represents
an IRQ downstream of charger regmap irq chip. In addition populate the
ack_base to offload irq ack to the regmap irq chip framework.
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260325-max77759-charger-v9-3-4486dd297adc@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a regulator supply property for vbus. This notifies the regulator
provider to source vbus when Type-C operates in Source power mode,
while turn off sourcing vbus when operating in Sink mode or
disconnected.
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260325-max77759-charger-v9-2-4486dd297adc@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Extend the max77759 binding to reference power-supply schema, so that
PMIC node can reference its supplier. Also, add regulator property to
control CHGIN (OTG) voltage.
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260325-max77759-charger-v9-1-4486dd297adc@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In case of insufficient bandwidth usb_submit_urb()
returns -ENOSPC. Translating this to -EIO is not
optimal. There are insufficient resources not
an error. EBUSY is a better fit.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260325145537.372993-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The spec for Embedded USB2 Version 2.0 adds a new feature
request. This needs to be added to uapi for monitoring.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260319144715.2957358-2-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds the USB authentication extensions to the
uapi chapter 9 declarations, so that user space tools
correctly operate on the descriptor and commands.
This is necessary for sniffing and debugging in gadget
mode to correctly work, even though the kernel
does not use these requests in host mode.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://patch.msgid.link/20260319144715.2957358-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The top-level part defines variable number of clocks and interrupts, and
each "if:then:" block narrows them. It however narrows only the
maxItems leaving minItems undefined, which then takes different values
depending on dtschema being used.
Recommended style is to avoid ambiguity in such case, thus if top-level
part has broad constraints, then each "if:then:" must specify both upper
and lower limits.
Add missing constraints, mostly minItems but also maxItems for one
variant.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260323-dt-bindings-snps-qcom-dwc3-cleanup-v2-2-3bcd37c0a5b5@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After moving the binding to style with combined wrapper+device (so one
node) there is no child node required. Drop the stale comment about it.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260323-dt-bindings-snps-qcom-dwc3-cleanup-v2-1-3bcd37c0a5b5@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Cadence USBSSP (CDNSP) controller was previously only accessible
through PCI, coupling the gadget driver with the PCI glue layer into a
single monolithic module (cdnsp-udc-pci). This prevented using the
CDNSP IP on SoC/platform designs that expose the controller through
device tree. It restructures the driver to decouple the CDNSP gadget
from PCI.
- Introduce CONFIG_USB_CDNSP as a standalone tristate (analogous to
CONFIG_USB_CDNS3), with USB_CDNSP_GADGET and USB_CDNSP_HOST as
bool sub-options. The gadget code builds as a separate cdnsp.ko
module.
- Regroup USBSSP and CDNS3 Kconfig options under the USB_CDNS_SUPPORT
menu so they appear properly grouped in menuconfig.
- Refactor cdnsp-pci.c into a thin PCI-to-platform wrapper (similar
to cdns3-pci-wrap.c) that registers a platform device and passes
PCI resources and platform data to the common platform driver.
- Auto-detect the controller version (USBSS vs USBSSP) at runtime by
reading the DRD/OTG Device ID register in cdns_drd_init(), and select
the appropriate gadget init function (cdns3_gadget_init or
cdnsp_gadget_init) based on cdns->version. This follows the same
pattern already used for host initialization.
- Fix gadget-export.h to use IS_REACHABLE() keyed on the tristate
module config (CONFIG_USB_CDNS3/CONFIG_USB_CDNSP) instead of
IS_ENABLED() on the bool gadget config. The bool configs are always
'y' when enabled, causing IS_ENABLED/IS_REACHABLE to always return
true and resulting in link errors when cdns-usb-common is built-in
but the gadget module is loadable.
- Add missing MODULE_LICENSE()/MODULE_DESCRIPTION() and
EXPORT_SYMBOL_GPL() to the cdns3 and cdnsp gadget modules, required
by modpost.
- Pass override_apb_timeout through cdns3_platform_data so the PCI
wrapper can communicate PCI-specific APB timeout values to the
common driver.
This patch is Assisted-by: Cursor:claude-4.6-opus
Signed-off-by: Peter Chen <peter.chen@cixtech.com>
Acked-by: Pawel Laszczak <pawell@cadence.com>
Link: https://patch.msgid.link/20260316064831.274865-3-peter.chen@cixtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update the Cadence USBSS DRD binding to document that it also covers
the USBSSP (SuperSpeed Plus, USB 3.1 gen2x1) controller. Both USBSS
and USBSSP share the same DRD/OTG register interface, so the driver
auto-detects the controller version at runtime — no additional
compatible string is needed.
Changes to the binding:
- Update title and add description
- maximum-speed: add super-speed-plus
This patch is Assisted-by: Cursor:claude-4.6-opus
Signed-off-by: Peter Chen <peter.chen@cixtech.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260316064831.274865-2-peter.chen@cixtech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add names to the memory-region-names for easier identification of memory
regions. As the meaning of the second memory region can be different
also require the use of memory-region-names if memory-region is in use.
Signed-off-by: Markus Schneider-Pargmann (TI) <msp@baylibre.com>
Link: https://lore.kernel.org/r/20260318-topic-am62a-ioddr-dt-v6-19-v3-2-c41473cb23c3@baylibre.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Split up the region reserved for the firmware image in more specific
sections to expose the full fixed layout. Especially the LPM metadata
section is important for bootloaders as it contains information about
how to exit IO+DDR. This is read by the bootloader but is written by the
firmware.
Signed-off-by: Markus Schneider-Pargmann (TI) <msp@baylibre.com>
Link: https://lore.kernel.org/r/20260318-topic-am62a-ioddr-dt-v6-19-v3-1-c41473cb23c3@baylibre.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
FUSB302 fails to probe with -EINVAL if its interrupt line is connected via
an I2C GPIO expander, such as TI TCA6416.
Switch the interrupt handler to a threaded one, which also works behind
such GPIO expanders.
Cc: stable <stable@kernel.org>
Fixes: 309b6341d5 ("usb: typec: fusb302: Revert incorrect threaded irq fix")
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Heikki Krogerus <heikki.krogrerus@linux.intel.com>
Link: https://patch.msgid.link/20260317-fusb302-irq-v2-1-dbabd5c5c961@flipper.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Existing checks for VID/PID/DID in the driver are redundant since the
driver is already matched to the device via I2C device ID and OF
compatible strings, and they preclude the use of fallback compatibles.
Remove them to make the driver slimmer and adding new clones easier.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Link: https://patch.msgid.link/20260318-husb311-v4-4-69e029255430@flipper.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As stated in [1], ETEK ET7304 is identical to Richtek RT1715, except for
the VID value in its registers, so reflect it in the bindings via a
fallback compatible.
As there are various TCPCI chips by different vendors reimplementing the
registers and behavior of the RT1711H/RT1715, fallback compatibles will
scale better.
Link: https://lore.kernel.org/all/20260220-et7304-v3-2-ede2d9634957@gmail.com/ [1]
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260318-husb311-v4-2-69e029255430@flipper.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Hynetek Semiconductor Co., Ltd. focuses on intelligent energy control
technology, mainly for the intelligent fast charging and digital energy
fields.
Link: https://en.hynetek.com/
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Link: https://patch.msgid.link/20260318-husb311-v4-1-69e029255430@flipper.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some SpacemiT K1 boards (like OrangePi R2S) provide USB VBUS
through a controllable regulator. Add support for the optional
vbus-supply property so the regulator can be properly managed
in host mode instead of left always-on. Note that this doesn't
apply to USB Hub downstream ports with different VBUS supplies.
The enabled and disabled actions of the regulator are handled
automatically by devm_regulator_get_enable_optional().
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Anand Moon <linux.amoon@gmail.com>
Link: https://patch.msgid.link/20260326100010.3588454-2-amadeus@jmu.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add compatible string for DWC3 USB controller found in SpacemiT K3 SoC.
The USB2.0 host controller in K3 SoC actually use DWC3 IP but only support
USB2.0 functionality, thus in the hardware layer, it has only one USB2 PHY.
While in K1 SoC, the USB controller has both USB2 and USB3 Combo PHY
connected, but able to work in a reduced USB2.0 mode which requres only
one USB2 PHY, leaves the USB3 Combo PHY to PCIe controller. So both K1
and K3 SoC are able to work in the USB2.0 mode which requires one PHY.
Explicitly reduce number of phy property to minimal one.
Signed-off-by: Yixun Lan <dlan@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260320-02-k3-usb20-support-v2-1-308ea0e44038@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function usb_gadget_udc_start() was renamed to
usb_gadget_udc_start_locked() by commit 286d9975a8 ("usb: gadget:
udc: core: Prevent soft_connect_store() race"). Update the comment
in usb_gadget_udc_set_speed() accordingly.
Assisted-by: unnamed:deepseek-v3.2 coccinelle
Signed-off-by: Kexin Sun <kexinsun@smail.nju.edu.cn>
Link: https://patch.msgid.link/20260321110006.8484-1-kexinsun@smail.nju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the chip indicates its "Connection Orientation" standard output control
in STANDARD_OUTPUT_CAPABILITIES register, it can do the thing by
programming CONFIG_STANDARD_OUTPUT register. Due to the optional feature,
the chip which not present this capability currently doesn't have a way to
correctly set the data path. This add the support to set orientation via
a simple GPIO.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260319-support-setting-orientation-use-gpio-v4-2-ab6dfa8610c2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Type-C chip know the cable orientation and then normally will set the
switch channel to correctly configure the data path. Some chips itself
support to output the control signal by indicating the capability in
bit[0] of STANDARD_OUTPUT_CAPABILITIES register and do it in
CONFIG_STANDARD_OUTPUT register. For PTN5110 which doesn't present this
capability currently there is no way to achieve the orientation setting.
Add an optional "orientation-gpios" property to achieve the same purpose.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260319-support-setting-orientation-use-gpio-v4-1-ab6dfa8610c2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Document the Renesas UPD720201/UPD720202 USB 3.0 xHCI Host Controller,
which connects over PCIe and requires specific power supplies to
start up.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260324-topic-sm8650-ayaneo-pocket-s2-upd-bindings-v2-1-b86a1543b76b@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Onboard USB hubs might be nested. Add the reference for the generic
usb-hub.yaml binding and lift the restriction on peer-hub.
A (downstream) hub might only be connected on USB High-Speed lines.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260313141220.1843488-1-alexander.stein@ew.tq-group.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
