It has been reported that since commit 752a0d1d48 ("arm64: mm:
Provide level hint for flush_tlb_page()"), the arm64
check_hugetlb_options selftest has been locking up while running "Check
child hugetlb memory with private mapping, sync error mode and mmap
memory".
This is due to hugetlb (and THP) helpers casting their PMD/PUD entries
to PTE and calling __ptep_set_access_flags(), which issues a
__flush_tlb_page(). Now that this is hinted for level 3, in this case,
the TLB entry does not get evicted and we end up in a spurious fault
loop.
Fix this by creating a __ptep_set_access_flags_anysz() function which
takes the pgsize of the entry. It can then add the appropriate hint. The
"_anysz" approach is the established pattern for problems of this class.
Reported-by: Aishwarya TCV <Aishwarya.TCV@arm.com>
Fixes: 752a0d1d48 ("arm64: mm: Provide level hint for flush_tlb_page()")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
A few fields in structs containing regulator initialisation data for Dell
laptops are initialised to 0 and NULL. Drop the explicit initialisation as
redundant.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Define regulators and gpio for ov5675 in MSI Prestige 14 AI EVO+ laptop.
Signed-off-by: Antti Laakso <antti.laakso@linux.intel.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
[Sakari Ailus: Drop redundant initialisation to 0 and NULL.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The tps68470 daisy chain make use of gpio 1 and 2. When in use, these
gpios must be configured as inputs without pull-up.
Signed-off-by: Antti Laakso <antti.laakso@linux.intel.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The tps68470 supports i2c daisy chain, which need to be configured by
gpio-tps68470 driver. Add daisy chain information to software node.
Signed-off-by: Antti Laakso <antti.laakso@linux.intel.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Defer probe if endpoint is not yet available. And do it before acquiring
clock, gpio and regulators.
Signed-off-by: Antti Laakso <antti.laakso@linux.intel.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
After media_pipeline_start() was called, the media graph is assumed to
be validated. It won't be validated again if a second stream starts.
The imx-media-csi driver, however, changes hardware configuration in the
link_validate() callback. This can result in started streams with
misconfigured hardware.
In the concrete example, the ipu2_csi1 is driven by a parallel video
input. After the media pipeline has been started with this
configuration, a second stream is configured to use ipu1_csi0 with
MIPI-CSI input from imx6-mipi-csi2. This may require the reconfiguration
of ipu1_csi0 with ipu_set_csi_src_mux(). Since the media pipeline is
already running, link_validate won't be called, and the ipu1_csi0 won't
be reconfigured. The resulting video is broken, because the ipu1_csi0 is
misconfigured, but no error is reported.
Move ipu_set_csi_src_mux from csi_link_validate to csi_start to ensure
that input to ipu1_csi0 is configured correctly when starting the
stream. This is a local reconfiguration in ipu1_csi0 and is possible
while the media pipeline is running.
Since csi_start() is called with priv->lock already locked,
csi_set_src() must not lock priv->lock again. Thus, the mutex_lock() is
dropped.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Fixes: 4a34ec8e47 ("[media] media: imx: Add CSI subdev driver")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Request the upstream mbus_config in csi_start, which starts the stream,
instead of caching it in link_validate.
This allows to get rid of the mbus_cfg field in the struct csi_priv and
avoids state in the driver.
Fixes: 4a34ec8e47 ("[media] media: imx: Add CSI subdev driver")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Adhering to Linux kernel coding style guidelines (Chapter 3: Indentation).
Signed-off-by: Ayush Kumar <ayushkr0s@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The LVDS Panel was never shipped from Beacon, and there are device
tree errors, so rather than trying to fix them, remove it instead.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260325162735.24467-1-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
When checking dts involving the r9a06g032.dtsi file, the following kind
of warnings are reported:
Missing property '#address-cells' in node xxx, using 0 as fallback
Indeed, #address-cells is not present in the GIC interrupt controller
node.
Fix it adding the missing property.
Value '0' is correct because:
1. GIC interrupt controller does not have children,
2. interrupt-map property in PCI node and in IRQ mux node consists of
several components and the component related to "parent unit
address", which size is defined by '#address-cells' of the node
pointed to by the interrupt-parent component, is not used (=0)
No functional change.
Signed-off-by: Herve Codina (Schneider Electric) <herve.codina@bootlin.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260325095718.388157-1-herve.codina@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The Renesas RZ/V2N SoC (a.k.a. r9a09g056) comes with 4 CA55
cores and 1 CM33 core.
While the user manual doesn't explicitly specify which cores
should have access to particular watchdogs, it turns out that
(similarly to the Renesas RZ/V2H(P)) it only makes sense for
Linux to use WDT1.
Remove DT nodes wdt{0,2,3} from the RZ/V2N SoC specific dtsi
to make it compliant with the original design intent.
This change is harmless as there are no users for the nodes
being stripped out of this device tree.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260324225239.19136-2-fabrizio.castro.jz@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The RZ/G3E SMARC SoM has a fixed 100 MHz reference clock generator
for PCIe. Model it as a fixed-clock and assign it to the PCIe port.
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # RZ/V2N EVK
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260318085119.44717-4-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The KSZ9131 schema does not document the "txdv-skew-psec" property,
neither does the kernel driver support this property. It does however
document and support the "txen-skew-psec" property. Fix what is likely
a copy-paste error from the matching "rxdv-skew-psec" property, use the
"txen-skew-psec" property instead of the "txdv-skew-psec" property.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tested-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260313164008.40933-5-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The Microchip KSZ9131 PHY schema indicates that the compatible string
"ethernet-phy-id0022.1640" must not be followed by any other compatible
string. Drop trailing "ethernet-phy-ieee802.3-c22" to match the schema.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260313164008.40933-4-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The Realtek RTL8211F PHY schema indicates that the compatible string
"ethernet-phy-id001c.c916" must not be followed by any other compatible
string. Drop trailing "ethernet-phy-ieee802.3-c22" to match the schema.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260313164008.40933-3-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The Realtek RTL8211E PHY schema indicates that the compatible string
"ethernet-phy-id001c.c915" must not be followed by any other compatible
string. Drop trailing "ethernet-phy-ieee802.3-c22" to match the schema.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260313164008.40933-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
When hv_pci_assign_numa_node() processes a device that does not have
HV_PCI_DEVICE_FLAG_NUMA_AFFINITY set or has an out-of-range
virtual_numa_node, the device NUMA node is left unset. On x86_64,
the uninitialized default happens to be 0, but on ARM64 it is
NUMA_NO_NODE (-1).
Tests show that when no NUMA information is available from the Hyper-V
host, devices perform best when assigned to node 0. With NUMA_NO_NODE
the kernel may spread work across NUMA nodes, which degrades
performance on Hyper-V, particularly for high-throughput devices like
MANA.
Always set the device NUMA node to 0 before the conditional NUMA
affinity check, so that devices get a performant default when the host
provides no NUMA information, and behavior is consistent on both
x86_64 and ARM64.
Fixes: 999dd956d8 ("PCI: hv: Add support for protocol 1.3 and support PCI_BUS_RELATIONS2")
Signed-off-by: Long Li <longli@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
The Renesas RZ/V2N SoC (a.k.a. r9a09g056) comes with 4 watchdogs.
As it turns out, it only makes sense for Linux to have access to
WDT1.
Remove the clock and reset entries for WDT{0,2,3} to prevent
interfering with the CM33 core.
This change is harmless as only WDT1 is currently used in Linux,
there are no users for the WDT{0,2,3} IPs.
Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260324225239.19136-3-fabrizio.castro.jz@renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The watchdog timeout is signaled using an interrupt and, on this
interrupt, a software initiated reset is performed.
This software initiated reset performs, in the end, a hardware system
reset using SWRST_REQ of RSTCTRL register.
The watchdog itself is able to control directly the hardware system
reset without any operation done by the interrupt handler. This feature
allows the watchdog to not depend on the software to reset the system
when a watchdog timeout occurs.
Indeed, when the watchdog timeout occurs, the watchdog requests a system
reset using its own hardware dedicated line but this reset source is
disabled at the reset controller level.
To benefit of this feature and be robust against software issues, enable
watchdogs reset sources.
Suggested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Herve Codina (Schneider Electric) <herve.codina@bootlin.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260324120435.243641-2-herve.codina@bootlin.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
struct_size() is what is normally used when a flexible array member is
present to avoid accidental mistakes. pm_size is still needed for the
memcpy() call below.
Added __counted_by for extra runtime analysis.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260324021103.13651-1-rosenp@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Initialized and left to themselves some boards with analog inputs,
on some modern platforms can throw critical errors which prevents
even digital from working thereafter. If analog is never used this
module parameter allows analog to be disabled on a card by card
basis.
It is already possible to disable analog audio.
For example, to disable for Hauppauge QuadHD with analog functionality:
options cx23885 disable_analog_video=56,57
can be placed insode of /etc/modprobe.d/cx23885.conf
Signed-off-by: Bradford Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
dvb_crc32() does exactly the same computation as the crc32_be() library
function. Just call crc32_be() instead.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Same as 461v2, but uses Montage ds3103c instead of ds3103b
Signed-off-by: Bradford Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Hauppauge 416e products have moved to using the 3103C satellite
demod. This demod behaves mostly like a 3103b, but has
different initialization, clocking, and lock operations.
This Linux code was reverse egineered entirely
using a Windows reference driver.
Signed-off-by: Bradford Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: fix a few minor checkpatch issues]
[hverkuil: fixed two minor sparse issues]
The Hauppauge HVR-935, HVR-955, and HVR-975 have moved
from cx231xx bridge to em2828x bridge.
The following USB device id's are new:
2040:0360 - HVR-935 ISOC transport
2040:8360 - HVR-935 Bulk transport
2040:0366 - HVR-955 ISOC transport
2040:8366 - HVR-955 Bulk transport
2040:036a - HVR-975 ISOC transport
2040:836a - HVR-975 Bulk transport
The devices all now utilize si2177 tuner. Capabilities are:
- Digital TV
- Composite video input
- S-Video input
- Analog stereo input
HVR-935 has DVB-C/T/T2 demod (si2168).
HVR-955 has ATSC/QAM demod (lgdt3306a).
HVR-975 has both ATSC/QAM and DVB-C/T/T2 demods.
Signed-off-by: Bradford Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: a few minor checkpatch fixes]
The si2177 is very closely related to si2157, with slight differences
when doing analog operations. Digital is left as is, but analog needs
to be configured specially because the signal is internally demodulated
and CVBS video is output directly from the tuner.
Verified locked and working with all supported standards.
Signed-off-by: Bradford Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Fix em28xx driver to accommodate a device with two i2c client demods.
The em28xx driver already had a multi frontend aware device struct,
with two fe, just not two i2c client demods. Since Hauppauge HVR975
has transitioned from cx231xx to em2828X, this is required for full
functionality of the devices.
Signed-off-by: Bradford Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
When the driver was converted to VB2 the original function to fix
green frame detection was removed and a default vb2 dqbuf function
was used instead. This vb2 dqbuf function leads to green frames not
being detected and correupting stream captures.
The vidioc_dqbuf function checks the greenscreen flag, and, if set
resets the stream to discard the green frame and decode a real frame.
Signed-off-by: Bradford Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
New revision of Hauppauge USB Live2 switches from cx231xx usb bridge
to Empia em2828X bridge. Inputs for the USB Live2 remain the same:
- Composite video
- S-Video
- Analog stereo audio
Signed-off-by: Bradford Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The empia em2828X usb bridge contains previous functionality,
but also contains an embedded video decoder. The implemented
capabilities include composite and s-video inputs, as well as
analog TV. Analog TV is expected in CVBS format, it must be
demodulated already.
Media controller decoder entity is included so pipeline
verification passes and graph is properly constructed.
Analog TV bits based off cx231xx driver.
Signed-off-by: Bradford Love <brad@nextdimension.cc>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: fix a few minor checkpatch issues]
Mark the first 128 MiB of DRAM as reserved. The first 128 MiB of DRAM
may optionally be used by TFA and other firmware for its own purposes,
and in such case, Linux must not use this memory.
On this platform, U-Boot runs in EL3 and starts TFA BL31 and Linux from
a single combined fitImage. U-Boot has full access to all memory in the
0x40000000..0xbfffffff range, as well memory in the memory banks in the
64-bit address ranges, and therefore U-Boot patches this full complete
view of platform memory layout into the DT that is passed to the next
stage.
The next stage is TFA BL31 and then the Linux kernel. The TFA BL31 does
not modify the DT passed from U-Boot to TFA BL31 and then to Linux with
any new reserved-memory {} node to reserve memory areas used by the TFA
BL31 to prevent the next stage from using those areas, which lets Linux
to use all of the available DRAM as described in the DT that was passed
in by U-Boot, including the areas that are newly utilized by TFA BL31.
In case of high DRAM utilization, for example in case of four instances
of "memtester 3900M" running in parallel, unless the memory used by TFA
BL31 is properly reserved, Linux may use and corrupt the memory used by
TFA BL31, which would often lead to system becoming unresponsive.
Until TFA BL31 can properly fill its own reserved-memory node into the
DT, and to assure older versions of TFA BL31 do not cause problems, add
explicitly reserved-memory {} node which prevents Linux from using the
first 128 MiB of DRAM.
Note that TFA BL31 can be adjusted to use different memory areas, this
newly added reserved-memory {} node follows longer-term practice on the
R-Car SoCs where the first 128 MiB of DRAM is reserved for firmware use.
In case user does modify TFA BL31 to use different memory ranges, they
must either use a future version of TFA BL31 which properly patches a
reserved-memory {} node into the DT, or they must adjust the address
ranges of this reserved-memory {} node accordingly.
Fixes: a719915e76 ("arm64: dts: renesas: r8a779g3: Add Retronix R-Car V4H Sparrow Hawk board support")
Cc: stable@vger.kernel.org
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260324143342.17872-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
A set of fixes for DMA-mapping subsystem, which resolve false-positive
warnings from KMSAN and DMA-API debug (Shigeru Yoshida and Leon
Romanovsky) as well as a simple build fix (Miguel Ojeda).
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSrngzkoBtlA8uaaJ+Jp1EFxbsSRAUCacP+awAKCRCJp1EFxbsS
RB0IAP94SD5YWfKauuYfXw0uxuy0POZR7rNX93y1LMxuorU+9QEAucOy9wIfjxKC
Sc6U+fR4cmmIUKKnj7DCiR/EW8cOuQU=
=b7th
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-7.0-2026-03-25' into dma-mapping-for-next
dma-mapping fixes for Linux 7.0
A set of fixes for DMA-mapping subsystem, which resolve false-positive
warnings from KMSAN and DMA-API debug (Shigeru Yoshida and Leon
Romanovsky) as well as a simple build fix (Miguel Ojeda).
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
The first byte of an i2c SMBUS message is the size, and it should be
verified to ensure that it is in the range of 0..I2C_SMBUS_BLOCK_MAX
before processing it.
This is the same logic that was added in commit a6e04f05ce ("i2c:
tegra: check msg length in SMBUS block read") to the i2c tegra driver.
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Andi Shyti <andi.shyti@kernel.org>
Cc: stable <stable@kernel.org>
Assisted-by: gkh_clanker_2000
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/2026022314-rely-scrubbed-4839@gregkh
IS_ERR_OR_NULL() already uses likely(!ptr) internally. checkpatch points
out the nesting: Remove the explicit use of likely().
Change generated with coccinelle.
Signed-off-by: Philipp Hahn <phahn-oss@avm.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260310-b4-is_err_or_null-v1-59-bd63b656022d@avm.de
As stated in the d70f60ad96 ("i2c: designware: Remove
not-going-to-be-supported code for Baikal SoC") the Baikal
platforms are not supported and the respective driver code
was removed. Remove the currently unused bindings.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260224115210.3499191-1-andriy.shevchenko@linux.intel.com
Currently the slot width in non-TDM mode is always kept at the POR value
of 32 bits, regardless of the sample width, which doesn't work well for
some codecs such as NAU8822.
Set the slot width according to the sample width in non-TDM mode, which
is what other CPU DAI drivers do.
Tested on the following RK3576 configurations:
- SAI2 + NAU8822 (codec as the clock master), custom board
- SAI1 + ES8388 (codec as the clock master), RK3576 EVB1
- SAI2 + RT5616 (SAI as the clock master), FriendlyElec NanoPi M5
NAU8822 didn't work prior to this patch but works after the patch. Other
two configurations work both before and after the patch.
Fixes: cc78d1eaab ("ASoC: rockchip: add Serial Audio Interface (SAI) driver")
Signed-off-by: Alexey Charkov <alchark@flipper.net>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20260318-sai-slot-width-v1-1-1f68186f71e3@flipper.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert rockchip-max98090.txt to yaml to allow dt-schema validation.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260324135508.839142-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because the HDP peripheral both depends on debug and firewall
configuration, when CONFIG_STM32_FIREWALL is present, use the
stm32 firewall framework to be able to check these configuration against
the relevant controllers.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Clément Le Goffic <legoffic.clement@gmail.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://lore.kernel.org/r/20260226-debug_bus-v6-12-5d794697798d@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add the stm32 debug bus driver that is responsible of checking the
debug subsystem accessibility before probing the related peripheral
drivers.
This driver is OP-TEE dependent and relies on the STM32 debug access
PTA.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Link: https://lore.kernel.org/r/20260226-debug_bus-v6-6-5d794697798d@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add the stm32_firewall_get_grant_all_access() API to be able to fetch
all firewall references in an access-controllers property and try to grant
access to all of them.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://lore.kernel.org/r/20260226-debug_bus-v6-5-5d794697798d@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Current implementation restricts the check on the firewall controller
being the bus parent. Change this by using the controller referenced
in each firewall queries.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Link: https://lore.kernel.org/r/20260226-debug_bus-v6-4-5d794697798d@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Document the stm32 debug bus. The debug bus is responsible for
checking the debug sub-system accessibility before probing any related
drivers.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260226-debug_bus-v6-3-5d794697798d@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
HDP being functional depends on the debug configuration on the platform
that can be checked using the access-controllers property, document it.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Linus Walleij <linusw@kernel.org>
Link: https://lore.kernel.org/r/20260226-debug_bus-v6-2-5d794697798d@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Document the access-controllers for coresight peripherals in case some
access checks need to be performed to use them.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260226-debug_bus-v6-1-5d794697798d@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
