Add clock drivers for the EIC7700 SoC. The clock controller on the ESWIN
EIC7700 provides various clocks to different IP blocks within the SoC.
Signed-off-by: Yifeng Huang <huangyifeng@eswincomputing.com>
Tested-by: Marcel Ziswiler <marcel@ziswiler.com> # ebc77
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Xuyang Dong <dongxuyang@eswincomputing.com>
Tested-by: Bo Gan <ganboing@gmail.com> # hfp550
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add the devres variant of clk_hw_register_divider_parent_data() for
registering a divider clock with parent clk data instead of parent
name.
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Xuyang Dong <dongxuyang@eswincomputing.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The quirk flag DSI_PHY_7NM_QUIRK_PRE_V4_1 is renamed to
DSI_PHY_7NM_QUIRK_V4_0 to better reflect the actual hardware revision
it applies to. (Only SM8150 uses it, its hardware revision is 4.0)
No functional change.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Pengyu Luo <mitltlatltl@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/707416/
Link: https://lore.kernel.org/r/20260226122958.22555-3-mitltlatltl@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
On current firmware versions, RPI_FIRMWARE_SET_CLOCK_STATE doesn't
actually power off the clock. To achieve meaningful power savings, the
clock rate must be set to the minimum before disabling. This might be
fixed in future firmware releases.
Rather than pushing rate management to clock consumers, handle it
directly in the clock framework's prepare/unprepare callbacks. In
unprepare, set the rate to the minimum before disabling the clock.
In prepare, for clocks marked with `maximize` (currently v3d),
restore the rate to the maximum after enabling.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Document FocalTech FT3519 support by adding the compatible. It's 10
point touchscreen, which is compatible with FT3518
Signed-off-by: Bhushan Shah <bhushan.shah@machinesoul.in>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260314-edt-ft3519-v3-1-5ee91b408ed6@machinesoul.in
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
sizeof returns size_t. Use the zu specifier for it. Fixes on x86-64:
error: format ‘%u’ expects argument of type ‘unsigned int’, but
argument 5 has type ‘long unsigned int’ [-Werror=format=]
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260321034227.3900-1-rosenp@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Create read-only debugfs entries for LOGINIT, LOGRM, and LOGINTR, which
are the three primary printf logging buffers from GSP-RM. LOGPMU will
be added at a later date, as it requires support for its RPC message
first.
This patch uses the `pin_init_scope` feature to create the entries.
`pin_init_scope` solves the lifetime issue over the `DEBUGFS_ROOT`
reference by delaying its acquisition until the time the entry is
actually initialized.
Co-developed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Tested-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260319212658.2541610-7-ttabi@nvidia.com
[ Rebase onto Coherent<T> changes. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Create the 'nova_core' root debugfs entry when the driver loads.
Normally, non-const global variables need to be protected by a
mutex. Instead, we use unsafe code, as we know the entry is never
modified after the driver is loaded. This solves the lifetime
issue of the mutex guard, which would otherwise have required the
use of `pin_init_scope`.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Tested-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260319212658.2541610-6-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Replace the module_pci_driver! macro with an explicit module
initialization using the standard module! macro and InPlaceModule
trait implementation. No functional change intended, with the
exception that the driver now prints a message when loaded.
This change is necessary so that we can create a top-level "nova_core"
debugfs entry when the driver is loaded.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Tested-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260319212658.2541610-5-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Implement the BinaryWriter trait for Coherent<[u8]>, enabling DMA
coherent allocations to be exposed as readable binary files. The
implementation handles offset tracking and bounds checking, copying data
from the coherent allocation to userspace via write_dma().
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Tested-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260319212658.2541610-4-ttabi@nvidia.com
[ Rebase onto Coherent<T> changes. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add UserSliceWriter::write_dma() to copy data from a Coherent<[u8]> to
userspace. This provides a safe interface for copying DMA buffer
contents to userspace without requiring callers to work with raw
pointers.
Because write_dma() and write_slice() have common code, factor that code
out into a helper function, write_raw().
The method handles bounds checking and offset calculation internally,
wrapping the unsafe copy_to_user() call.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Tested-by: Eliot Courtney <ecourtney@nvidia.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260319212658.2541610-3-ttabi@nvidia.com
[ Rebase onto Coherent<T> changes; remove unnecessary turbofish from
cast(). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Add job that executes the IGT test suite for rk3588-rock-5b.
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Qualcomm apq8016 and apq8096 DUTS are moved to Collabora lava
farm. So enable these jobs to use lava and update expectation
files.
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Co-developed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Uprev mesa to adapt to the latest changes in Mesa CI, such as:
- LAVA overlay-based firmware handling
- Container/job rule separation
- Removal of the python-artifacts job
- Use lava-job-submitter container to submit jobs
- Use of the Alpine container for LAVA jobs
- Various other CI improvements
- Remove bare-metal jobs and disable apq8016 and apq8096 jobs,
as these have been migrated to the Collabora LAVA farm
- Fix issues with rebase with external fixes branch
- Update expectation files
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Co-developed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
asus-C436FA-Flip-hatch has fewer devices available in the LAVA lab and
drm-ci uses only 2 DUTs, causing tests to time out. Update drm-ci to
use puff instead of hatch so the tests can run on 5 DUTs.
Also increase parallel count for amly jobs to 3.
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The sm8350-hdk jobs are short and each test takes around 2–3 minutes and
the full job completes in about 10 minutes. Running 4 parallel jobs uses
4 devices at once, which is not needed. Set parallel to 2 to reduce
device usage.
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Add a test to make sure that variable length stack writes
scrubs STACK_SPILL into STACK_MISC.
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260324215938.81733-2-alexei.starovoitov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
- Fix typo to ensure .builtin-dtbs.S is properly cleaned
- Fix '==' bashism in scripts/kconfig/merge_config.sh
- Fix awk error in scripts/kconfig/merge_config.sh when base
configuration is empty
- Fix inconsistent indentation in scripts/kconfig/merge_config.sh
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR74yXHMTGczQHYypIdayaRccAalgUCacL9RwAKCRAdayaRccAa
lnpJAP9h7iW5/MGjLt8ErvH0a5CrHEZRqJUEqQfJa1haYa6gxwD+NnREu4V5YetJ
xVoqHLpD/A26xGCmkuMxWasZ156LOQY=
=8CH+
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-7.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild fixes from Nathan Chancellor:
"This mostly addresses some issues with the awk conversion in
scripts/kconfig/merge_config.sh.
- Fix typo to ensure .builtin-dtbs.S is properly cleaned
- Fix '==' bashism in scripts/kconfig/merge_config.sh
- Fix awk error in scripts/kconfig/merge_config.sh when base
configuration is empty
- Fix inconsistent indentation in scripts/kconfig/merge_config.sh"
* tag 'kbuild-fixes-7.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
scripts: kconfig: merge_config.sh: fix indentation
scripts: kconfig: merge_config.sh: pass output file as awk variable
scripts: kconfig: merge_config.sh: fix unexpected operator warning
kbuild: Delete .builtin-dtbs.S when running make clean
Add a name() method to the `Device` type, which returns a CStr that
contains the device name.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Tested-by: John Hubbard <jhubbard@nvidia.com>
Tested-by: Eliot Courtney <ecourtney@nvidia.com>
Link: https://patch.msgid.link/20260319212658.2541610-2-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Extend fat_test with coverage for FAT timestamp edge cases that are not
currently exercised.
Add tests for fat_time_unix2fat() clamping at the UTC boundaries and
when time_offset pushes an otherwise valid timestamp outside the FAT
date range. Also cover the NULL time_cs path used by existing callers,
and verify fat_truncate_atime() truncation across timezone offsets.
Link: https://patch.msgid.link/20260315222404.9678-1-aviv.daum@gmail.com
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: avivdaum <aviv.daum@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
These clocks are used by PCIe lanes, but we're missing from the
definition.
Suggested-by: Charalampos Mitrodimas <charmitro@posteo.net>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/20260304-rk3568-bri-r2-pro-fix-pcie-v4-1-37abd7ba29d0@ixit.cz
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The mphy reset signal is used to reset the physical adapter. Resetting
other components while leaving the mphy unreset may occasionally prevent
the UFS controller from successfully linking up with the device.
This addresses an intermittent hardware bug where the UFS link fails to
establish under specific timing conditions with certain chips. While
difficult to reproduce initially, this issue was consistently observed in
downstream testing and requires explicit mphy reset control for full
stability.
Fixes: c75e5e010f ("scsi: arm64: dts: rockchip: Add UFS support for RK3576 SoC")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/1773277913-29580-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable the One Time Programmable Controller (OTPC) in RK3528 and add
an initial nvmem fixed layout.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260312213019.13965-4-heiko@sntech.de
Enable the One Time Programmable Controller (OTPC) in RK356x and add
an initial nvmem fixed layout.
Tested-by: Diederik de Haas <diederik@cknow-tech.com> # NanoPi R5S, PineNote
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260312213019.13965-3-heiko@sntech.de
Add supports-clkreq and the corresponding pinmux configurations for PCIe
ASPM L1 substates on the Rock 5B, 5B+ and 5T.
The supports-clkreq flag informs the PCIe controller that the hardware
routing for the CLKREQ# sideband signal is present. This enables support
for PCIe ASPM (Active State Power Management) L1 substates, allowing for
better power efficiency.
Cc: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/20260316073621.39027-1-linux.amoon@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Provide aliases for the SD and eMMC interfaces, so that the operating
system can assign stable interface names.
On Linux this is only relevant when booting without partition UUID
based root device identification, e.g. when booting without an
initramfs. In that case booting with e.g. root=/dev/mmcblk0p2 is
unreliable without this patch as the device numbers changed based
on device probe order.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260317-sige5-mmc-aliases-v1-1-ee93a1571802@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add support for all six SPDIF transmitters found in the RK3576.
The nodes have been taken over from the BSP kernel and checked
against the TRM (power domain descriptions from chapter 6.3.2,
addresses from "Table 1-1 Address Mapping", interrupt from
"Table 1-3 RK3576 Interrupt Connection List" (TRM numbers are
off by 32 due to SGI/PPI not being numbered separately). The
TRM lacks a proper clock tree, but fortunately are quite obvious
for the SPDIF IP.
Note, that the RK3576 also has 3 SPDIF receivers, which need their
own binding and are not handled in this patch.
A typical use case for the SPDIF transmitters is audio support for
the Displayport (DP) controller. DP requires inserting PCUV control
bits, which requires software support when using I2S. The SPDIF IP
can add it automatically and thus is preferred.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://patch.msgid.link/20260316-rk3576-spdif-v1-2-acb75088b560@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Khadas Edge 2L is a single board computer based on the Rockchip
RK3576 SoC.
Add basic device tree support for this board. Currently, only eMMC
and UART are enabled, allowing the board to boot into a basic Linux
system via the serial console.
Signed-off-by: Gray Huang <gray.huang@wesion.com>
Link: https://patch.msgid.link/20260317090731.600787-3-gray.huang@wesion.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Calling smp_processor_id() on:
- In CONFIG_DEBUG_PREEMPT=y, if preemption/irq is disabled, then it does
not print any warning.
- In CONFIG_DEBUG_PREEMPT=n, it doesn't do anything apart from getting
__smp_processor_id
So with both CONFIG_DEBUG_PREEMPT=y/n, in preemption disabled section it is
better to cache the value. It saves a few cycles. Though tiny, repeated
adds up.
timer_clear_idle() is called with interrupts disabled. So cache the value
once.
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Mukesh Kumar Chaurasiya (IBM) <mkchauras@gmail.com>
Link: https://patch.msgid.link/20260323193630.640311-5-sshegde@linux.ibm.com
The DEVMAP_HASH branch in dev_map_redirect_multi() uses
hlist_for_each_entry_safe() to iterate hash buckets, but this function
runs under RCU protection (called from xdp_do_generic_redirect_map()
in softirq context). Concurrent writers (__dev_map_hash_update_elem,
dev_map_hash_delete_elem) modify the list using RCU primitives
(hlist_add_head_rcu, hlist_del_rcu).
hlist_for_each_entry_safe() performs plain pointer dereferences without
rcu_dereference(), missing the acquire barrier needed to pair with
writers' rcu_assign_pointer(). On weakly-ordered architectures (ARM64,
POWER), a reader can observe a partially-constructed node. It also
defeats CONFIG_PROVE_RCU lockdep validation and KCSAN data-race
detection.
Replace with hlist_for_each_entry_rcu() using rcu_read_lock_bh_held()
as the lockdep condition, consistent with the rcu_dereference_check()
used in the DEVMAP (non-hash) branch of the same functions. Also fix
the same incorrect lockdep_is_held(&dtab->index_lock) condition in
dev_map_enqueue_multi(), where the lock is not held either.
Fixes: e624d4ed4a ("xdp: Extend xdp_redirect_map with broadcast support")
Signed-off-by: David Carlier <devnexen@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260320072645.16731-1-devnexen@gmail.com
alarm_timer_forward() passes arguments to alarm_forward() in the wrong
order:
alarm_forward(alarm, timr->it_interval, now);
However, alarm_forward() is defined as:
u64 alarm_forward(struct alarm *alarm, ktime_t now, ktime_t interval);
and uses the second argument as the current time:
delta = ktime_sub(now, alarm->node.expires);
Passing the interval as "now" results in incorrect delta computation,
which can lead to missed expirations or incorrect overrun accounting.
This issue has been present since the introduction of
alarm_timer_forward().
Fix this by swapping the arguments.
Fixes: e7561f1633 ("alarmtimer: Implement forward callback")
Signed-off-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260323061130.29991-1-zhanxusheng@xiaomi.com
Document @regs and @step parameters for arch_ptrace_report_syscall_entry()
and arch_ptrace_report_syscall_exit() that were missing from the kernel-doc
comments.
Signed-off-by: Kit Dallege <xaum.io@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Assisted-by: Claude:claude-opus-4-6
Link: https://patch.msgid.link/20260315170941.65913-1-xaum.io@gmail.com
numa_set_mempolicy_home_node() was introduced in libnuma 2.0.18, not
2.0.16, via:
8f2ffc8965
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260306182215.2088991-1-dave@stgolabs.net
Use LIBNUMA_TEST to conditionally add -lnuma to LDLIBS.
Guard numa header includes with #ifdef LIBNUMA_VER_SUFFICIENT
to allow compilation without libnuma installed.
Co-developed-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Nylon Chen <nylon.chen@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260301-20260128_nylon_chen_sifive_com-v3-1-995ab4cc71aa@sifive.com
Now that the UAPI headers provide the required definitions, use those.
Some symbols have been renamed, adapt to those.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Now that the UAPI headers provide the required definitions, use those.
Some symbols have been renamed, adapt to those.
Also adapt the include path for the custom sign-file rule in the
bpf selftests.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
This header is going to be used from scripts/sign-file.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
This structure definition is used outside the kernel proper.
For example in kmod and the kernel build environment.
To allow reuse, move it to a new UAPI header.
While it is not a true UAPI, it is a common practice to have
non-UAPI interface definitions in the kernel's UAPI headers.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
The purpose of the constant it is not entirely clear from its name.
As this constant is going to be exposed in a UAPI header, give it a more
specific name for clarity. As all its users call it 'marker', use that
wording in the constant itself.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
This enum originates in generic cryptographic code and has a very
generic name. Nowadays it is only used for module signatures.
As this enum is going to be exposed in a UAPI header, give it a more
specific name for clarity and consistency.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Only PKCS#7 signatures are used today.
Remove the unused enum values. As this enum is used in on-disk data,
preserve the numeric value.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
This definition duplicates a definition from an internal kernel header
which is going to be renamed.
To get rid of an instance of the old name, drop the definition.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
