Add MT7902 PCIe specific DMA layout overrides for MCU TXQ index, RX ring
size, and MCU_WA usage. Common layout remains the default for other chips.
This is a prerequisite patch before enabling MT7902 PCIe support.
Co-developed-by: Xiong Huang <xiong.huang@mediatek.com>
Signed-off-by: Xiong Huang <xiong.huang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260219004007.19733-4-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
MT7902 PCIe requires a different wm2_complete_mask value, so introduce a
mutable per-device copy of the default irq_map and override the field
only for this chip. Other devices continue using the shared const
template.
This is a prerequisite patch before enabling MT7902 PCIe support.
Co-developed-by: Xiong Huang <xiong.huang@mediatek.com>
Signed-off-by: Xiong Huang <xiong.huang@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260219004007.19733-3-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Replace explicit napi_disable() calls for RX queues with
mt76_for_each_q_rx() in mt7921e_mac_reset().
This removes hardcoded queue indices and disables all configured
RX queues during reset.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260219004007.19733-2-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Unify all per-chip conditionals under the new is_connac2() helper. This
avoids confusion caused by the previous is_mt7921() check, which
implicitly covered multiple connac2 chipsets and no longer reflected its
actual scope. This is a clean-up only change with no functional impact.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Link: https://patch.msgid.link/20260219004007.19733-1-sean.wang@kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Before sending the current EEPROM data to the firmware, read the
calibration-free data (FT data) from the efuse and merge it with
the existing EEPROM data.
Co-developed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Link: https://patch.msgid.link/20260212090310.3335392-3-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Introduce VAR_TYPE_24 for the MT7992 chipsets, a dual-band variant
supporting 3T3R/2SS on the 2 GHz band and 5T5R/4SS on the 5GHz band.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20260212090310.3335392-2-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
For the MT7992 and MT7990 chipsets, efuse mode is not supported because
there is insufficient space in the efuse to store the calibration data.
Therefore, an additional on-chip EEPROM is added to address this
limitation.
Co-developed-by: Elwin Huang <s09289728096@gmail.com>
Signed-off-by: Elwin Huang <s09289728096@gmail.com>
Co-developed-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Link: https://patch.msgid.link/20260212090310.3335392-1-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
kvmemdup_bpfptr() returns -EFAULT when the user pointer cannot be
copied, and -ENOMEM on allocation failure. The error path always
returned -ENOMEM, misreporting bad addresses as out-of-memory.
Return PTR_ERR(sig) so user space gets the correct errno.
Signed-off-by: Weixie Cui <cuiweixie@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/tencent_C9C5B2B28413D6303D505CD02BFEA4708C07@qq.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
bpf_prog_test_run_skb() uses net->ipv6.ip6_null_entry for
BPF_PROG_TYPE_LWT_XMIT test runs.
It currently checks ipv6_bpf_stub before using ip6_null_entry.
ipv6_bpf_stub will be removed by the CONFIG_IPV6=m support removal
series posted at [1], so switch this check to ipv6_mod_enabled()
instead.
This change depends on that series [1]. Without it, CONFIG_IPV6=m is
still possible, and net->ipv6.ip6_null_entry remains NULL until
the IPv6 module is loaded.
[1] https://lore.kernel.org/netdev/20260320185649.5411-1-fmancera@suse.de/
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Sun Jian <sun.jian.kdev@gmail.com>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Link: https://lore.kernel.org/r/20260323225250.1623542-1-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
If fprobe_entry does not fill the allocated fgraph_data completely, the
unused part does not have to be zeroed.
fgraph_data is a short-lived part of the shadow stack. The preceding
length field allows locating the end regardless of the content.
Link: https://lore.kernel.org/all/20260324084804.375764-1-martin@kaiser.cx/
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Fix compiler warnings about unused parameter, narrowing non-constant
into a smaller type and comparison between integers of different size.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260323231133.859941-1-ameryhung@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Simplify tnum_step() from a 10-variable algorithm into a straight
line sequence of bitwise operations.
Problem Reduction:
tnum_step(): Given a tnum `(tval, tmask)` where `tval & tmask == 0`,
and a value `z` with `tval ≤ z < (tval | tmask)`, find the smallest
`r > z`, a tnum-satisfying value, i.e., `r & ~tmask == tval`.
Every tnum-satisfying value has the form tval | s where s is a subset
of tmask bits (s & ~tmask == 0). Since tval and tmask are disjoint:
tval | s = tval + s
Similarly z = tval + d where d = z - tval, so r > z becomes:
tval + s > tval + d
s > d
The problem reduces to: find the smallest s, a subset of tmask, such
that s > d.
Notice that `s` must be a subset of tmask, the problem now is simplified.
Algorithm:
The mask bits of `d` form a "counter" that we want to increment by one,
but the counter has gaps at the fixed-bit positions. A normal +1 would
stop at the first 0-bit it meets; we need it to skip over fixed-bit
gaps and land on the next mask bit.
Step 1 -- plug the gaps:
d | carry_mask | ~tmask
- ~tmask fills all fixed-bit positions with 1.
- carry_mask = (1 << fls64(d & ~tmask)) - 1 fills all positions
(including mask positions) below the highest non-mask bit of d.
After this, the only remaining 0s are mask bits above the highest
non-mask bit of d where d is also 0 -- exactly the positions where
the carry can validly land.
Step 2 -- increment:
(d | carry_mask | ~tmask) + 1
Adding 1 flips all trailing 1s to 0 and sets the first 0 to 1. Since
every gap has been plugged, that first 0 is guaranteed to be a mask bit
above all non-mask bits of d.
Step 3 -- mask:
((d | carry_mask | ~tmask) + 1) & tmask
Strip the scaffolding, keeping only mask bits. Call the result inc.
Step 4 -- result:
tval | inc
Reattach the fixed bits.
A simple 8-bit example:
tmask: 1 1 0 1 0 1 1 0
d: 1 0 1 0 0 0 1 0 (d = 162)
^
non-mask 1 at bit 5
With carry_mask = 0b00111111 (smeared from bit 5):
d|carry|~tm 1 0 1 1 1 1 1 1
+ 1 1 1 0 0 0 0 0 0
& tmask 1 1 0 0 0 0 0 0
The patch passes my local test: test_verifier, test_progs for
`-t verifier` and `-t reg_bounds`.
CBMC shows the new code is equiv to original one[1], and
a lean4 proof of correctness is available[2]:
theorem tnumStep_correct (tval tmask z : BitVec 64)
-- Precondition: valid tnum and input z
(h_consistent : (tval &&& tmask) = 0)
(h_lo : tval ≤ z)
(h_hi : z < (tval ||| tmask)) :
-- Postcondition: r must be:
-- (1) tnum member
-- (2) z < r
-- (3) for any other member w > z, r <= w
let r := tnumStep tval tmask z
satisfiesTnum64 r tval tmask ∧
tval ≤ r ∧ r ≤ (tval ||| tmask) ∧
z < r ∧
∀ w, satisfiesTnum64 w tval tmask → z < w → r ≤ w := by
-- unfold definition
unfold tnumStep satisfiesTnum64
simp only []
refine ⟨?_, ?_, ?_, ?_, ?_⟩
-- the solver proves each conjunct
· bv_decide
· bv_decide
· bv_decide
· bv_decide
· intro w hw1 hw2; bv_decide
[1] https://github.com/eddyz87/tnum-step-verif/blob/master/main.c
[2] https://pastebin.com/raw/czHKiyY0
Signed-off-by: Hao Sun <hao.sun@inf.ethz.ch>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Reviewed-by: Harishankar Vishwanathan <harishankar.vishwanathan@gmail.com>
Link: https://lore.kernel.org/r/20260320162336.166542-1-hao.sun@inf.ethz.ch
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This was renamed in commit 23ef9d4397 ("kcfi: Rename CONFIG_CFI_CLANG
to CONFIG_CFI") as it is now a compiler-agnostic option. Using the wrong
name results in the code getting compiled out. Meaning the CFI failures
for btf_dtor_kfunc_t would still trigger.
Fixes: 99fde4d062 ("bpf, btf: Enforce destructor kfunc type with CFI")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20260312183818.2721750-1-cmllamas@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Since commit 603b441623 ("bpf: Update the bpf_prog_calc_tag to use
SHA256") made BPF program tags use SHA-256 instead of SHA-1, the header
<crypto/sha1.h> no longer needs to be included. Remove the relevant
inclusions so that they no longer unnecessarily come up in searches for
which kernel code is still using the obsolete SHA-1 algorithm.
Since net/ipv6/addrconf.c was relying on the transitive inclusion of
<crypto/sha1.h> (for an unrelated purpose) via <linux/filter.h>, make it
include <crypto/sha1.h> explicitly in order to keep that file building.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Acked-by: Paul Chaignon <paul.chaignon@gmail.com>
Link: https://lore.kernel.org/r/20260314214555.112386-1-ebiggers@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In NAN, we have one set of (HT, VHT, HE) capabilities for all bands,
which means that we will need to process those capabilities without a
given sband.
To prepare for that, remove the sband argument from
ieee80211_ht_cap_ie_to_sta_ht_cap and ieee80211_he_cap_ie_to_sta_he_cap
and pass our own capabilities instead.
For ieee80211_vht_cap_ie_to_sta_vht_cap, make the sband argument
optional, since it is also used to check if there is at least one channel
that supports 80 MHz.
(Note that this check doesn't make much sense, but this can be handled in
a different patch.)
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260320141504.e42ef1f0eabb.If994d6346f00219437e22043e7bf2395b827b34a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In case of an error in ieee80211_add_virtual_monitor,
SDATA_STATE_RUNNING should be cleared as it was set in this function.
Do it there instead of in the error path of ieee80211_do_open.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260320141312.5546126313b1.I689dba2f54069b259702e8d246cedf79a73b82c6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Devices that support UNII-9 will call ieee80211_channel_to_freq_khz
with a channel number that can go up to 253.
Allow the new channel numbers in ieee80211_channel_to_freq_khz.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260320102034.efcb7ea1de3c.Ifa4b75a24466de2a1d5707181c9c487618236e4b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently we have only one user for a channel context: the link.
With NAN, a new type of the channel context user will be added - the NAN
channel.
To prepare for this, we need to separate the channel context code from
the link code.
Removes the link argument from ieee80211_find_chanctx. Since the issue that led
to commit 5e0c422d12 ("wifi: mac80211: reserve chanctx during find") - that
added the link argument - is relevant for any user of the channel context, add
a boolean to the chanctx itself, indicating that the chanctx is in the process
of getting used.
When this indication is set, the reference count of the channel context
will be incremented by one, so even if it is getting released from a link
(or another user) it won't be freed.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260320101954.232499e2a41f.I0b735a607e1ec7aa5749ab01c794ef99dbe82b7f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Just add support for ELR, and nothing else since the spec
isn't really all that well-specified yet.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260320101624.77af6463920e.I257e525a461c350bed87cfaefc52de25e37afcfb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
for_each_chanctx_user_* is an iterator that visits all types of chanctx
users, including the (to be added) NAN channels, and not only the link.
ieee80211_get_chanctx_max_required_bw wasn't changed to use this new
iterator, do it now.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20260320101556.4691916c7877.I9660f3945f4dccdb6d41a06ec4e74161e5ac65a4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Replace the deprecated[1] strncpy() with strscpy_pad() for copying the
interface name into a tracepoint entry.
The source "sdata->name" is a NUL-terminated char[IFNAMSIZ] buffer
populated via NUL-guaranteeing paths: strscpy() in ieee80211_if_add(),
snprintf() in ieee80211_add_virtual_monitor(), or memcpy() from
ndev->name in ieee80211_if_add() and netdev_notify()
(net/mac80211/iface.c). In the memcpy() cases, the source ndev->name
is itself always NUL-terminated (populated via snprintf() or strscpy()
in __dev_alloc_name() and dev_prep_valid_name() in net/core/dev.c).
The destination "local_vifs[i].vif.vif_name" is a char[IFNAMSIZ] field
in struct trace_vif_entry, stored in a __dynamic_array within the trace
ring buffer. Since ring buffer entries are not zeroed on allocation,
strscpy_pad() is used to zero-fill trailing bytes and prevent exposing
stale ring buffer contents to userspace readers of tracefs.
No behavioral change: since interface names are always at most 15
characters plus a NUL terminator, strscpy_pad() with size IFNAMSIZ (16)
produces identical output to the original strncpy().
Link: https://github.com/KSPP/linux/issues/90 [1]
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20260323172015.work.146-kees@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A few small cleanups and bug fixes across ath drivers.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ/mtSHzPUi16IfDEksFbugiYzLewUCacKeTQAKCRAsFbugiYzL
e6cDAP9C0c6rdwSGYJQO6FPIlU+tNGTpjU11mGORR4gWSlVPywEA6tjY4rGCv3zO
1NNhMun+Ps6WsM63LPHgyeQ45Z8TzgI=
=u+bs
-----END PGP SIGNATURE-----
Merge tag 'ath-next-20260324' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git patches for v7.1 (PR #2)
A few small cleanups and bug fixes across ath drivers.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The DRM_TTM_KUNIT_TEST config option should default
to KUNIT_ALL_TESTS so that if all tests are enabled then
it is included, but currently the 'default KUNIT_ALL_TESTS'
statement is shadowed by an unconditional 'default n',
meaning that this second default statement is currently dead code.
This dead code was found by kconfirm, a static analysis
tool for Kconfig.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20260323124118.1414913-1-julianbraha@gmail.com
The implicit FILEID_INO32_GEN encoder was changed to be explicit,
so we need to fix the detection.
When mounting overlayfs with upperdir and lowerdir on different ext4
filesystems, the expected kmsg log is:
overlayfs: "xino" feature enabled using 32 upper inode bits.
But instead, since the regressing commit, the kmsg log was:
overlayfs: "xino" feature enabled using 2 upper inode bits.
Fixes: e21fc2038c ("exportfs: make ->encode_fh() a mandatory method for NFS export")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Scheduling of work items with an async workqueue opens the door to
potential races between multiple instances of a work item.
While the frame transfer function is now protected against races, using
a workqueue doesn't provide much benefit considering the limited cost of
creating a job transfer.
Replace the usage of the work queue with direct function calls.
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The scheduling of a new buffer transfer in the IVC driver is triggered
by two occurrences of the "frame completed" interrupt.
The first interrupt occurrence identifies when all image data have been
transferred to the ISP, the second occurrence identifies when the
post-transfer VBLANK has completed and a new buffer can be transferred.
Under heavy system load conditions the actual execution of the workqueue
item might be delayed and two items might happen to run concurrently,
leading to a new frame transfer being triggered while the previous one
has not yet finished.
This error condition is only visible because the driver maintains a
status variable that counts the number of interrupts since the last
transfer, and warns in case an IRQ happens before the counter has been
reset.
To ensure sequential execution of the worqueue items and avoid a double
buffer transfer to run concurrently, protect the whole function body
with the spinlock that so far was solely used to reset the counter and
inspect the interrupt counter variable at the beginning of the buffer
transfer function.
As soon as the ongoing transfer completes, the workqueue item will be
re-scheduled and will consume the pending buffer.
Cc: stable@vger.kernel.org
Fixes: f0b3984d82 ("media: platform: Add Renesas Input Video Control block driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The list of buffers (`rzv2h_ivc::buffers.queue`) is protected by a
spinlock (`rzv2h_ivc::buffers.lock`). However, in
`rzv2h_ivc_transfer_buffer()`, which runs in a separate workqueue, the
`list_del()` call is executed without holding the spinlock, which makes
it possible for the list to be concurrently modified
Fix that by removing a buffer from the list in the lock protected section.
Cc: stable@vger.kernel.org
Fixes: f0b3984d82 ("media: platform: Add Renesas Input Video Control block driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Barnabás Pőcze <barnabas.pocze+renesas@ideasonboard.com>
[assign ivc->buffers.curr in critical section as reported by Barnabas]
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Bit 20 should be written in this register to stop frame processing.
So fix that, as well as the poll condition.
Cc: stable@vger.kernel.org
Fixes: f0b3984d82 ("media: platform: Add Renesas Input Video Control block driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Barnabás Pőcze <barnabas.pocze+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The documentation prescribes that invalid formats should not be set,
so do a single write to ensure that both the CLFMT and DTYPE fields
are set to valid values.
Cc: stable@vger.kernel.org
Fixes: f0b3984d82 ("media: platform: Add Renesas Input Video Control block driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Barnabás Pőcze <barnabas.pocze+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
According to the documentation there are writable reserved bits in the
register and those should not be set to 0. So use `rzv2h_ivc_update_bits()`
with a proper bitmask.
Cc: stable@vger.kernel.org
Fixes: f0b3984d82 ("media: platform: Add Renesas Input Video Control block driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Barnabás Pőcze <barnabas.pocze+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The vertical blanking settings for the IVC block are dependent on
settings in the ISP. This was originally set to calculate as the
worst-case possible value, but it seems that this can cause the IVC
block to hang. Instead calculate the vblank to match the default
settings (which are currently all the driver sets anyway).
Cc: stable@vger.kernel.org
Fixes: f0b3984d82 ("media: platform: Add Renesas Input Video Control block driver")
Signed-off-by: Daniel Scally <dan.scally+renesas@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Purple Fringe Correction module is enabled by default with a POR
configuration which might not be correct for the lens/sensor combination
in use.
If the Purple Fringe Correction module has to be used, it needs to be
supported in the driver's uAPI and properly configured by userspace.
As the driver doesn't support it at the moment, bypass it by default.
Reviewed-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Iridix Tonemap engine, if not bypassed, applies a digital gain
in order to compensate under-exposed images.
This however breaks the exposure and gain regulation performed on the
sensor.
If the Iridix Tonemap has to be used, it need to be supported in the
ISP uAPI and properly configured by userspace.
As the driver doesn't support it at the moment, bypass it by default.
Reviewed-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Mali C55 Iridix block has a digital gain function and tone mapping
function, whose enablement is controlled by two different bits
in the BYPASS_3 register.
Unfortunately, the "Gain" and "Tonemap" bypass bit definitions are the
wrong way around. Swap them.
Cc: stable@vger.kernel.org
Fixes: d5f281f3dd ("media: mali-c55: Add Mali-C55 ISP driver")
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Mali C55 driver uses an auto-suspend delay of 2000 milli-seconds.
As the delay is quite large, it is certainly possible that two
consecutive calls to enable_streams() do not go through a suspend of the
peripheral, meaning we cannot rely on POW register values for the ISP
configuration.
To prevent a streaming session to be initialized with settings from the
previous one, reset the full ISP configuration to know state disabling or
bypassing all the ISP blocks the driver supports.
Cc: stable@vger.kernel.org
Fixes: d5f281f3dd ("media: mali-c55: Add Mali-C55 ISP driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Mali C55 driver initializes the ISP in two points:
1) At probe time it disables ISP blocks by configuring them in bypass
mode
2) At enable_streams() it initializes the crop rectangles and the image
processing pipeline using the current image format
However, as ISP blocks are configured by userspace, if their
configuration is not reset, from the second enable_streams() call
onwards the ISP configuration will depend on the previous streaming
session configuration.
To re-initialize the ISP completely at enable_streams() time consolidate
the ISP block bypass configuration and the image processing path
configuration in a single function to be called at enabled_streams()
time.
Cc: stable@vger.kernel.org
Fixes: d5f281f3dd ("media: mali-c55: Add Mali-C55 ISP driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Some bad copy&paste happened in the description of the ISP block types
and AWB_CONFIG got mixed up with SHADING_CONFIG.
Fix it by assigning to each block the correct type.
As only the comment is changed, there is no uABI breakage or regression.
Cc: stable@vger.kernel.org
Fixes: d5f281f3dd ("media: mali-c55: Add Mali-C55 ISP driver")
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Reviewed-by: Barnabás Pőcze <barnabas.pocze@ideasonboard.com>
Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Wenyuan Li <2063309626@qq.com> says:
The driver currently ignores the return values of several I2C operations
during register writes, which could lead to silent failures and
inconsistent device state.
Link: https://patch.msgid.link/tencent_579D057AC557914CF739A2D9EAD045CE7306@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert existing debug and error prints to dev_err() to provide better
diagnostic information. Use the %pe format specifier to print
human-readable error strings for I2C failures.
Signed-off-by: Wenyuan Li <2063309626@qq.com>
Link: https://patch.msgid.link/tencent_A26B55F062F2B9C282A142BFC8BCDB1B9105@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver currently ignores the return values of several I2C operations
during register writes, which could lead to silent failures and
inconsistent device state.
Fix this by:
- Moving variable declarations to the beginning of the function (C90).
- Checking the return value of every i2c_master_send() and recv() call.
- Returning the actual error code if it's negative, or -EIO if the
transfer was incomplete.
Signed-off-by: Wenyuan Li <2063309626@qq.com>
Link: https://patch.msgid.link/tencent_579D057AC557914CF739A2D9EAD045CE7306@qq.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The memcpy function assumes the dynamic array notif->matches is at least
as large as the number of bytes to copy. Otherwise, results->matches may
contain unwanted data. To guarantee safety, extend the validation in one
of the checks to ensure sufficient packet length.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Cc: stable@vger.kernel.org
Fixes: 5ac54afd4d ("wifi: iwlwifi: mvm: Add handling for scan offload match info notification")
Signed-off-by: Alexey Velichayshiy <a.velichayshiy@ispras.ru>
Link: https://patch.msgid.link/20260207150335.1013646-1-a.velichayshiy@ispras.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When a driver is probed through __driver_attach(), the bus' match()
callback is called without the device lock held, thus accessing the
driver_override field without a lock, which can cause a UAF.
Fix this by using the driver-core driver_override infrastructure taking
care of proper locking internally.
Note that calling match() from __driver_attach() without the device lock
held is intentional. [1]
Also note that we do not enable the driver_override feature of struct
bus_type, as SPI - in contrast to most other buses - passes "" to
sysfs_emit() when the driver_override pointer is NULL. Thus, printing
"\n" instead of "(null)\n".
Link: https://lore.kernel.org/driver-core/DGRGTIRHA62X.3RY09D9SOK77P@kernel.org/ [1]
Reported-by: Gui-Dong Han <hanguidong02@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220789
Fixes: 5039563e7c ("spi: Add driver_override SPI device attribute")
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260324005919.2408620-12-dakr@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
cputemp_is_visible() validates the channel index against
CPUTEMP_CHANNEL_NUMS, but currently uses '>' instead of '>='.
As a result, channel == CPUTEMP_CHANNEL_NUMS is not rejected even though
valid indices are 0 .. CPUTEMP_CHANNEL_NUMS - 1.
Fix the bounds check by using '>=' so invalid channel indices are
rejected before indexing the core bitmap.
Fixes: bf3608f338 ("hwmon: peci: Add cputemp driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260323002352.93417-3-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The hwmon sysfs ABI expects tempN_crit_hyst to report the temperature at
which the critical condition clears, not the hysteresis delta from the
critical limit.
The peci cputemp driver currently returns tjmax - tcontrol for
crit_hyst_type, which is the hysteresis margin rather than the
corresponding absolute temperature.
Return tcontrol directly, and update the documentation accordingly.
Fixes: bf3608f338 ("hwmon: peci: Add cputemp driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260323002352.93417-2-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The custom avs0_enable and avs1_enable sysfs attributes access PMBus
registers through the exported API helpers (pmbus_read_byte_data,
pmbus_read_word_data, pmbus_write_word_data, pmbus_update_byte_data)
without holding the PMBus update_lock mutex. These exported helpers do
not acquire the mutex internally, unlike the core's internal callers
which hold the lock before invoking them.
The store callback is especially vulnerable: it performs a multi-step
read-modify-write sequence (read VOUT_COMMAND, write VOUT_COMMAND, then
update OPERATION) where concurrent access from another thread could
interleave and corrupt the register state.
Add pmbus_lock_interruptible()/pmbus_unlock() around both the show and
store callbacks to serialize PMBus register access with the rest of the
driver.
Fixes: 038a9c3d1e ("hwmon: (pmbus/isl68137) Add driver for Intersil ISL68137 PWM Controller")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260319173055.125271-3-sanman.pradhan@hpe.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
ina233_read_word_data() reads MFR_READ_VSHUNT via pmbus_read_word_data()
but has two issues:
1. The return value is not checked for errors before being used in
arithmetic. A negative error code from a failed I2C transaction is
passed directly to DIV_ROUND_CLOSEST(), producing garbage data.
2. MFR_READ_VSHUNT is a 16-bit two's complement value. Negative shunt
voltages (values with bit 15 set) are treated as large positive
values since pmbus_read_word_data() returns them zero-extended in an
int. This leads to incorrect scaling in the VIN coefficient
conversion.
Fix both issues by adding an error check, casting to s16 for proper
sign extension, and clamping the result to a valid non-negative range.
The clamp is necessary because read_word_data callbacks must return
non-negative values on success (negative values indicate errors to the
pmbus core).
Fixes: b64b6cb163 ("hwmon: Add driver for TI INA233 Current and Power Monitor")
Cc: stable@vger.kernel.org
Signed-off-by: Sanman Pradhan <psanman@juniper.net>
Link: https://lore.kernel.org/r/20260319173055.125271-2-sanman.pradhan@hpe.com
[groeck: Fixed clamp to avoid losing the sign bit]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
of_parse_phandle() returns a device_node reference that must be released with
of_node_put(). The original code never freed r5_core_node on any exit path,
causing a memory leak.
Fix this by using the automatic cleanup attribute __free(device_node) which
ensures of_node_put() is called when the variable goes out of scope.
Fixes: d5fe2fec6c ("EDAC: Add a driver for the AMD Versal NET DDR controller")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Cc: <stable@kernel.org>
Link: https://patch.msgid.link/20260323-versalnet-v1-1-4ab3012635ef@gmail.com
