A child socket inherits the listener's bpf_sock_ops_cb_flags via
sk_clone_lock(). If its setup fails in tcp_v4_syn_recv_sock() /
tcp_v6_syn_recv_sock(), the child is freed through put_and_exit, where
inet_csk_prepare_forced_close() drops the socket lock and tcp_done() runs
without it.
If BPF_SOCK_OPS_STATE_CB_FLAG was inherited, tcp_done() -> tcp_set_state()
calls tcp_call_bpf(), which expects the lock and trips sock_owned_by_me():
WARNING: include/net/sock.h:1799 at tcp_set_state+0x433/0x550
RIP: 0010:tcp_set_state+0x433/0x550 include/net/sock.h:1799
Call Trace:
<IRQ>
tcp_done+0xba/0x250 net/ipv4/tcp.c:5095
tcp_v4_syn_recv_sock+0x850/0xa50 net/ipv4/tcp_ipv4.c:1787
tcp_check_req+0xf30/0x1360 net/ipv4/tcp_minisocks.c:926
tcp_v4_rcv+0x1047/0x1b50 net/ipv4/tcp_ipv4.c:2164
</IRQ>
The child is freed before it is ever established, so it should run no
sock_ops callback. Clear its cb flags in inet_csk_prepare_for_destroy_sock(),
the common point for the IPv4, IPv6 and chtls forced-close paths and for the
MPTCP ->syn_recv_sock() failure path (dispose_child), which reaches tcp_done()
on a child that was never established too.
Suggested-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Fixes: d44874910a ("bpf: Add BPF_SOCK_OPS_STATE_CB")
Signed-off-by: Sechang Lim <rhkrqnwk98@gmail.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260611092923.1895982-1-rhkrqnwk98@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A comment in drivers/net/ethernet/sis/sis900.h incorrectly refers to
CONFIG_VLAN_802_1Q instead of CONFIG_VLAN_8021Q. Correct it.
Discovered while searching for CONFIG_* symbols referenced in code but
not defined in any Kconfig file.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260609175656.20574-1-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Minor updates to the XDP metadata documentation:
- s/union/struct/ for xsk_tx_metadata
- document nested request and completion metadata fields
- point capability queries at the xsk-features attribute
- fix grammar in the XDP RX metadata guide
- typos
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20260609201224.1191391-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The xdp.py test test_xdp_native_adjst_head_grow_data crashes when run on
a bnxt machine (and also crashes in NIPA).
It seems that the bug is an underflow in bnxt_rx_multi_page_skb, which
builds the skb head:
napi_build_skb(data_ptr - bp->rx_offset, rxr->rx_page_size);
The problem with this expression is that in page mode, rx_offset is:
bp->rx_offset = NET_IP_ALIGN + XDP_PACKET_HEADROOM;
Which evaluates (at least on x86_64) to 258.
The test test_xdp_native_adjst_head_grow_data tests a case where the
head is adjusted by -256.
When this test runs, data_ptr is shifted to frag_start + 2 (where
frag_start = page_address(page) + offset).
Then, bnxt_rx_multi_page_skb is invoked and the napi_build_skb
expression subtracts 258, landing at an address before frag_start. This
could be either the previous fragment or the previous physical page when
the offset is < 256 (e.g. if the fragment started at offset 0).
When the skb is freed, the page pool fragment reference is dropped on
either the wrong page or the wrong frag of the right page. In either
case, the corrupted reference count can lead to the page being
prematurely recycled while still in use. Once (incorrectly) recycled, it
can be handed out again and on driver teardown this would result in a
double free.
The commit under fixes updated this code to handle the case where the
native page size is >= 64k, but it unintentionally broke the head grow
case.
To fix this, add an offset field to struct bnxt_sw_rx_bd, mirroring the
existing offset field in struct bnxt_sw_rx_agg_bd. Populate it on
allocation and preserve it on reuse.
In bnxt_rx_multi_page_skb, use the newly added offset field to compute
the fragment start and pass that to napi_build_skb. Adjust the layout
with skb_reserve.
There are two cases, the non-adjustment case and the adjustment case.
In both cases, the skb is built at page_address(page) + offset to
account for the case where the native page size >= 64K and skb_reserve
is called with data_ptr - (page_address(page) + offset). That
difference equals bp->rx_offset when data_ptr was not moved, or
bp->rx_offset + xdp_adjust when XDP adjusted the head.
Re-running the failing test with this commit applied causes the test to
run successfully to completion.
The other rx_skb_func implementations don't have this issue.
Fixes: f6974b4c2d ("bnxt_en: Fix page pool logic for page size >= 64K")
Signed-off-by: Joe Damato <joe@dama.to>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20260609204458.2237787-2-joe@dama.to
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enabling the RX Buffer Unavailable (RBUE) interrupt is counterproductive
and can trigger a MAC interrupt storm under heavy RX pressure. When the
DMA runs out of RX descriptors it fires RBUE continuously until software
refills the ring.
However, RBUE is redundant: the normal RX completion interrupt (RIE)
already triggers NAPI, which processes completed descriptors and refills
the ring, causing the DMA to resume. The RBUE handler itself only sets
handle_rx - the same outcome as RIE.
On Agilex5 under heavy RX pressure, the MAC interrupt (which includes
RBUE) was observed firing 1,821,811,555 times against only 2,618,627
actual RX completions - a ~695x ratio - confirming the severity of the
storm.
RBUE does not provide OOM recovery. If page_pool is exhausted,
stmmac_rx_refill() cannot advance the DMA tail pointer, the DMA stays
suspended, and RBUE fires again on the next NAPI completion - a storm
with no forward progress. This patch trades that storm for a clean
stall with the same RX outcome. Proper OOM recovery is a pre-existing
gap outside the scope of this fix.
Note: as a consequence of disabling RBUE, the rx_buf_unav_irq ethtool
counter will always read 0 on XGMAC2 devices. This behaviour is already
inconsistent across DWMAC core versions.
Remove RBUE from XGMAC_DMA_INT_DEFAULT_EN and XGMAC_DMA_INT_DEFAULT_RX
to prevent the interrupt storm while keeping normal RX handling intact.
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Nazim Amirul <muhammad.nazim.amirul.nazle.asmade@altera.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260609121703.9736-1-muhammad.nazim.amirul.nazle.asmade@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ACCEPT and DONE are the two downcalls of the handshake genl
family, both intended for use by the trusted handshake agent
(tlshd). ACCEPT already requires GENL_ADMIN_PERM; DONE has
no privilege check at all.
The fd-lookup in handshake_nl_done_doit() only confirms that
some pending handshake request exists for the supplied sockfd;
it does not authenticate the sender. An unprivileged process
that guesses or observes a valid sockfd can therefore submit
a DONE with HANDSHAKE_A_DONE_STATUS == 0, leaving the kernel
consumer to proceed as if the handshake succeeded. A non-zero
status on a forged DONE tears down a legitimate in-flight
handshake before tlshd can report its real result.
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260609141831.90694-1-cel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tushar Vyavahare says:
====================
selftests/xsk: simplify UMEM setup
This series simplifies UMEM handling in selftests/xsk.
It centralizes UMEM property setup through helpers, moves UMEM ownership
from ifobject to socket-owned state, and normalizes umem_size/mmap_size
usage across the touched paths.
====================
Link: https://patch.msgid.link/20260608130938.958793-1-tushar.vyavahare@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
UMEM teardown currently recomputes the munmap() length from frame
geometry, shared-UMEM adjustment, and hugepage rounding. This duplicates
setup-time logic in cleanup and relies on re-deriving the mapping size
instead of using the size originally established for the mapping.
Store the final mapping length in xsk_umem_info as mmap_size when the
UMEM mapping is created, and use that value during teardown.
Also join the RX worker thread before cleanup in the single-thread
path. This establishes synchronization before reading umem->mmap_size
in teardown and avoids a potential visibility race.
This removes duplicated size arithmetic in cleanup and makes munmap()
use the canonical mapping size recorded at setup time.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20260608130938.958793-5-tushar.vyavahare@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace remaining open-coded `umem->num_frames * umem->frame_size`
calculations in test_xsk.c with the existing `umem_size()` helper.
This keeps UMEM size computation centralized, avoids duplicated arithmetic,
and improves readability with no intended behavior change.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20260608130938.958793-4-tushar.vyavahare@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move UMEM ownership from ifobject to xsk_socket_info and access it
through xsk->umem.
Allocate one shared umem_real in ifobject_create() and let all
sockets reference it through xsk->umem, while keeping ownership in
xsk_arr[0]. Keep the existing goto-based error path in
ifobject_create() and free the allocation once in ifobject_delete().
Reset the existing umem_real in __test_spec_init() with memset()
instead of reallocating it.
Preserve shared-UMEM behavior by copying RX UMEM state into a TX-local
UMEM state in thread_common_ops_tx() and reset base_addr/next_buffer
before TX socket configuration.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Link: https://patch.msgid.link/20260608130938.958793-3-tushar.vyavahare@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
UMEM properties are set via open-coded field assignments in multiple test
paths, which makes updates noisy and error-prone.
Introduce two helpers to set UMEM properties through a single interface.
This keeps setup logic consistent across tests and makes future refactoring
simpler.
No functional behavior change is intended.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20260608130938.958793-2-tushar.vyavahare@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The affected pinctrl drivers either check for the presence of a standard
property or read a property documented with an 8-bit cell encoding.
Using boolean or u32 helpers for those cases disagrees with the binding.
Use a presence helper for "gpio-ranges" and read
"microchip,spi-present-mask" with the u8 helper documented by the
binding.
Assisted-by: Codex:gpt-5-5
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add description for the EC firmware running on Hamoa/Purwa and Glymur
reference devices.
Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
Co-developed-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Co-developed-by: Anvesh Jain P <anvesh.p@oss.qualcomm.com>
Signed-off-by: Anvesh Jain P <anvesh.p@oss.qualcomm.com>
Link: https://patch.msgid.link/20260511-add-driver-for-ec-v9-1-e5437c39b7f8@oss.qualcomm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Add a tdc test that checks the act_pedit extended L4 header mode does not
edit a packet whose IPv4 protocol does not match the selected transport
header.
The test installs an ingress pedit rule that sets the UDP destination
port, then injects a TCP packet with dport 2222. The UDP and TCP
destination ports sit at the same L4 offset, so a buggy kernel rewrites
the TCP dport. A second flower filter matches TCP dport 2222 and drops
the packet through an indexed gact action; the test then verifies via
JSON that this action saw exactly one packet, i.e. the dport was left
untouched and still matched 2222.
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The extended IPv4 L4 header mode in act_pedit can select TCP or UDP
header fields without confirming that the IPv4 protocol field matches
the selected transport header.
That lets a rule written for TCP or UDP modify unrelated payload bytes
in a packet carrying a different protocol.
Verify that the IPv4 header is long enough, that the protocol matches
the selected TCP or UDP header, and that the packet is not a non-initial
fragment before applying TCP or UDP extended header edits.
Cc: stable+noautosel@kernel.org # in real rule sets the match confirms this before calling the action
Signed-off-by: Samuel Moelius <sam.moelius@trailofbits.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix agp_amd64_probe error propagation.
- Require carveout when PASID is not enabled amdxdna.
- Clear variable to prevent second unbind in amdxdna.
- Add separate Kconfig option for DMABUF_HEAPS_SYSTEM_CC_SHARED.
-----BEGIN PGP SIGNATURE-----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=yfKW
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2026-06-11' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next-fixes for v7.2:
- Fix agp_amd64_probe error propagation.
- Require carveout when PASID is not enabled amdxdna.
- Clear variable to prevent second unbind in amdxdna.
- Add separate Kconfig option for DMABUF_HEAPS_SYSTEM_CC_SHARED.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/c7a9dbb0-a5c8-4e67-904e-1a52b3de9bb4@linux.intel.com
Apple Silicon devices integrate a vast array of sensors, monitoring
current, power, temperature, and voltage across almost every part of
the system. The sensors themselves are all connected to the System
Management Controller (SMC). The SMC firmware exposes the data
reported by these sensors via its standard FourCC-based key-value
API. The SMC is also responsible for monitoring and controlling any
fans connected to the system, exposing them in the same way.
For reasons known only to Apple, each device exposes its sensors with
an almost totally unique set of keys. This is true even for devices
which share an SoC. An M1 Mac mini, for example, will report its core
temperatures on different keys to an M1 MacBook Pro. Worse still, the
SMC does not provide a way to enumerate the available keys at runtime,
nor do the keys follow any sort of reasonable or consistent naming
rules that could be used to deduce their purpose. We must therefore
know which keys are present on any given device, and which function
they serve, ahead of time.
Add a schema so that we can describe the available sensors for a given
Apple Silicon device in the Devicetree.
Reviewed-by: Neal Gompa <neal@gompa.dev>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20251215-macsmc-subdevs-v6-1-0518cb5f28ae@gmail.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
In is_full_charged(), power_supply_get_by_name() is called to
obtain a reference to the fuel_gauge power supply. If the
voltage check (uV >= desc->fullbatt_uV) succeeds, the function
returns true directly without releasing the reference, leaking
the refcount.
Fix this by setting a flag and jumping to the out label where
power_supply_put() properly drops the reference.
Cc: stable@vger.kernel.org
Fixes: e132fc6bb8 ("power: supply: charger-manager: Make decisions focussed on battery status")
Signed-off-by: WenTao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20260611005322.53096-1-vulab@iscas.ac.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
If dts property power-supplies has multiple values, then accessing to
psy->supplied_from[i-1] in __power_supply_populate_supplied_from will
overrun supplied_from array.
Fixes: f6e0b081fb ("power_supply: Populate supplied_from hierarchy from the device tree")
Signed-off-by: Lucas Tsai <lucas_tsai@richtek.com>
Link: https://patch.msgid.link/20260609114403.3896073-1-lucas_tsai@richtek.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The 1920x1080@60 modedb entry has one too many initializers before
its sync field: a stray "0" occupies the sync slot, which shifts the
remaining values by one field. The entry therefore decodes as
sync = 0, vmode = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT (0x3,
i.e. FB_VMODE_INTERLACED | FB_VMODE_DOUBLE), and flag =
FB_VMODE_NONINTERLACED, instead of the intended sync = positive H/V,
vmode = non-interlaced.
fb_find_mode() then returns a 1920x1080 mode flagged as interlaced +
doublescan with active-low syncs. Drivers that honour var->vmode and
var->sync when programming display timing enable doublescan and the
wrong sync polarity, corrupting the output.
Drop the stray initializer so sync and vmode hold their intended
values (positive H/V sync, non-interlaced), matching the adjacent
1920x1200 entry.
Fixes: c8902258b2 ("fbdev: modedb: Add 1920x1080 at 60 Hz video mode")
Cc: stable@vger.kernel.org
Signed-off-by: Steffen Persvold <spersvold@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
-----BEGIN PGP SIGNATURE-----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=/21W
-----END PGP SIGNATURE-----
Merge tag 'pci-v7.1-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci fix from Bjorn Helgaas:
- Add Frank Li as PCI endpoint reviewer (Frank Li)
* tag 'pci-v7.1-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
MAINTAINERS: Add Frank Li as PCI endpoint reviewer
cxl: Add dummy function for cxl_memdev_attach_region for !CONFIG_CXL_REGION
cxl/region: Introduce devm_cxl_probe_mem()
cxl/memdev: Introduce cxl_class_memdev_type
cxl/memdev: Pin parents for entire memdev lifetime
cxl/region: Resolve region deletion races
cxl/region: Block region delete during region creation
Add a dummy function that returns -EOPNOTSUPP for cxl_memdev_attach_region
when CONFIG_CXL_REGION is not enabled. This allow sbuilding when
cxl/core/region.o isn't built.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202606100401.GOjzpKHo-lkp@intel.com/
Fixes: 9b1e70e8f9ec ("cxl/region: Introduce devm_cxl_probe_mem()")
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <djbw@kernel.org>
Link: https://patch.msgid.link/20260610001324.260268-1-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
To date, platform firmware maps accelerator memory and accelerator drivers
simply want an address range that they can map themselves. This typically
results in a single region being auto-assembled upon registration of a
memory device. Use the @attach mechanism of devm_cxl_add_memdev()
parameter to retrieve that region while also adhering to CXL subsystem
locking and lifetime rules. As part of adhering to current object lifetime
rules, if the region or the CXL port topology is invalidated, the CXL core
arranges for the accelertor driver to be detached as well.
The locking and lifetime rules were validated with Dave's work-in-progress
cxl-type-2 support for cxl_test.
devm_cxl_add_classdev() supports the general memory expansion flow where
region assembly is optional, dynamic, and user controlled.
Cc: Alejandro Lucero <alucerop@amd.com>
Signed-off-by: Dan Williams <djbw@kernel.org>
Reviewed-by: Alejandro Lucero <alucerop@amd.com>
Tested-by: Alejandro Lucero <alucerop@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260519210158.1499795-6-djbw@kernel.org
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
In preparation for memdev's without mailbox related infrastructure,
introduce cxl_class_memdev_type as a superset of a cxl_memdev_type.
Effectively the only difference is that cxl_class_memdev_type exports
common sysfs attributes where cxl_memdev_type has none.
Related to this is all the cxl_mem_probe() paths that assume the presence
of a class device mailbox are updated to skip that requirement.
Co-developed-by: Alejandro Lucero <alucerop@amd.com>
Signed-off-by: Alejandro Lucero <alucerop@amd.com>
Signed-off-by: Dan Williams <djbw@kernel.org>
Tested-by: ALejandro Lucero <alucerop@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260519210158.1499795-5-djbw@kernel.org
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
In order to be able to manage the driver that uses a memdev attach
mechanism the parent needs to stick around for the
device_release_driver(cxlmd->dev.parent) event.
Fixes: 29317f8dc6 ("cxl/mem: Introduce cxl_memdev_attach for CXL-dependent operation")
Signed-off-by: Dan Williams <djbw@kernel.org>
Reviewed-by: Alejandro Lucero <alucerop@amd.com>
Tested-by: ALejandro Lucero <alucerop@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260519210158.1499795-4-djbw@kernel.org
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Sungwoo noticed that the sysfs trigger to delete a region may try to delete
a region multiple times. It also has no exclusion relative to the kernel
releasing the region via CXL root device teardown.
Instead of installing new cxl root devres actions per region, use the
existing root decoder unregistration event to remove all remaining regions.
An xarray of regions replaces a devres list of regions.
This handles 3 separate issues with the old approach:
1/ sysfs users racing to delete the same region: no longer possible now
that the regions_lock is held over the lookup and deletion.
2/ multiple actions triggering deletion of the same region: solved by
erasing regions while holding @regions_lock, and only proceeding on
successful erasure.
3/ userspace racing devres_release_all() to trigger the devres not found
warning: solved by sysfs unregistration not requiring a release action
Fixes: 779dd20cfb ("cxl/region: Add region creation support")
Reported-by: Sungwoo Kim <iam@sung-woo.kim>
Closes: http://lore.kernel.org/20260427032010.916681-2-iam@sung-woo.kim
Signed-off-by: Dan Williams <djbw@kernel.org>
Reviewed-by: Alejandro Lucero <alucerop@amd.com>
Tested-by: ALejandro Lucero <alucerop@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260519210158.1499795-3-djbw@kernel.org
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Expand the range lock, rename it "regions_lock", to disable region deletion
in the critical period between construct_region() and attach_target(), as
well as the period between device_add() and registering the remove actions.
Otherwise, userspace can confuse the kernel. It can violate the assumption
the region stays registered through the completion of cxl_add_to_region().
It can violate the assumption that devm_add_action_or_reset() is working
with a live 'struct cxl_region'.
It is ok for the region to disappear outside of those windows as that
mirrors device hotplug flows where the proper locks are held.
Fixes: a32320b71f ("cxl/region: Add region autodiscovery")
Signed-off-by: Dan Williams <djbw@kernel.org>
Reviewed-by: Alejandro Lucero <alucerop@amd.com>
Tested-by: ALejandro Lucero <alucerop@amd.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://patch.msgid.link/20260519210158.1499795-2-djbw@kernel.org
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
It's rare to find a system that has more than 4 sockets,
but a system can have more than 4 NUMA nodes if each socket
exposes its chiplets as separate NUMA nodes.
In particular, our CI caught a failure in this test on a system with
two sockets, each containing an 'AMD EPYC 7601 32-Core Processor'.
Bump the limit to 32, just in case.
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-ID: <20260612150038.1277394-1-mlevitsk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I have volunteered to review PCI endpoint-related changes. Add myself as a
reviewer to be notified when related patches are posted.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Link: https://patch.msgid.link/20260611210007.529205-1-Frank.Li@oss.nxp.com
Translate the documentation file '3.Early-stage.rst' into Portuguese.
This section addresses corporate kernel development constraints,
the balance between company secrecy and the open-loop approach,
and the use of NDAs or Linux Foundation programs to avoid
integration issues.
Signed-off-by: Daniel Pereira <danielmaraboo@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260601192346.192752-1-danielmaraboo@gmail.com>
This update includes the "Purpose of Defconfigs" section translated
to Brazilian Portuguese.
Signed-off-by: Amanda Corrêa <amandacorreasilvax@gmail.com>
Acked-by: Daniel Pereira <danielmaraboo@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260604031840.17236-1-amandacorreasilvax@gmail.com>
Fix a grammar issue to improve readability
Signed-off-by: Manuel Ebner <manuelebner@mailbox.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260605190055.15921-2-manuelebner@mailbox.org>
Translate the "Use trimmed interleaved replies in email discussions"
and "Don't get discouraged - or impatient" sections in
Documentation/translations/ja_JP/process/submitting-patches.rst.
Keep the wording close to the English text and wrap lines to match
the style used in the surrounding Japanese translation.
Signed-off-by: Akiyoshi Kurita <weibu@redadmin.org>
Acked-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260606035954.27605-1-weibu@redadmin.org>
Fix minor grammatical error in the administration guide.
Signed-off-by: Brigham Campbell <me@brighamcampbell.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260609070618.12566-1-me@brighamcampbell.com>
CONFIG_DEBUG_SLAB was removed in commit 2a19be61a6 ("mm/slab: remove
CONFIG_SLAB from all Kconfig and Makefile"), but references to it
remained in documentation. The English documentation was updated to
refer to CONFIG_SLUB_DEBUG in commit 5969fbf302 ("docs:
submit-checklist: structure by category"), but these translations were
never similarly updated. Update them.
Discovered while searching for CONFIG_* symbols referenced in the
kernel but not defined in any Kconfig file.
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260611010014.412841-1-enelsonmoore@gmail.com>
A couple of driver specific fixes for v7.1, a small targetted fix for
hardware error handling on DesignWare controllers and another for
handling of custom chip select managmenet on Qualcomm GENI controllers.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmosRy4ACgkQJNaLcl1U
h9DIigf8CYkVGrJ/PRXvWUcF4xwiwyO1GsM15cDN3LVUC6dD2P2DzHjxVvr5KvzI
J+ZS7Dyh/TDTZxdCS1foHsQWALtwNfLMqVQHk/YdJDH7ELVQkHzyxUwVa9RJtexM
d7HHtCoYivANp3CQugJVXux11cRinRCU8aCBvcj7/o26tRxFmvoRT9U7jsAJULyG
7Mb03RCsOlxi2cOGRSTq3a4b2GanoxD+z7zKde99jTI5haA7oWR3XLEgLSBf5REl
PUEwTkrPopTqESELOZe+YinGwLhVljAkSX+f6yAAVbk33aW2hSmveNpb5wK40dRF
E3NmCpAxjcAxo0iIBfVjUHGXIK8now==
=8A3s
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v7.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of driver specific fixes: a small targeted fix for hardware
error handling on DesignWare controllers and another for handling of
custom chip select management on Qualcomm GENI controllers"
* tag 'spi-fix-v7.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: dw: fix race between IRQ handler and error handler on SMP
spi: qcom-geni: Fix cs_change handling on the last transfer
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> says:
Current ASoC supports snd_soc_daifmt_parse_format() which can specify DAI
format by "dai-format" property from DT.
But strictly speaking, it is SW settings, so doesn't match to DT's policy.
Current ASoC is supporting auto format select via
snd_soc_dai_ops :: .auto_selectable_formats.
But the user is very few today.
DT doesn't need to specify the DAI format via "dai-format", if both CPU
and Codec drivers were supporting .auto_selectable_formats. It will be
automatically selected from .auto_selectable_formats.
But, I noticed that current auto format select method can't handle all cases.
For example, current .auto_selectable_formats is like below
static u64 xxx_auto_formats[] = {
(A) /* First Priority */
SND_SOC_POSSIBLE_DAIFMT_I2S |
SND_SOC_POSSIBLE_DAIFMT_LEFT_J |
SND_SOC_POSSIBLE_DAIFMT_NB_NF |
SND_SOC_POSSIBLE_DAIFMT_NB_IF | (x)
SND_SOC_POSSIBLE_DAIFMT_IB_NF |
SND_SOC_POSSIBLE_DAIFMT_IB_IF, (x)
/* Second Priority */
(B) SND_SOC_POSSIBLE_DAIFMT_DSP_A | (y)
SND_SOC_POSSIBLE_DAIFMT_DSP_B, (y)
};
It try to find DAI format from (A) first, and next it will use (A | B).
But it can't handle the format if some format were independent.
For example, DSP_x (y) can't use with xB_IF (x), etc.
So, I would like to update the method. New method doesn't use OR.
It try to find DAI format from (a), next it will use (b).
static u64 xxx_auto_formats[] = {
(a) /* First Priority */
SND_SOC_POSSIBLE_DAIFMT_I2S |
SND_SOC_POSSIBLE_DAIFMT_LEFT_J |
SND_SOC_POSSIBLE_DAIFMT_NB_NF |
SND_SOC_POSSIBLE_DAIFMT_NB_IF |
SND_SOC_POSSIBLE_DAIFMT_IB_NF |
SND_SOC_POSSIBLE_DAIFMT_IB_IF,
/* Second Priority */
(b) SND_SOC_POSSIBLE_DAIFMT_DSP_A |
SND_SOC_POSSIBLE_DAIFMT_DSP_B |
SND_SOC_POSSIBLE_DAIFMT_NB_NF |
SND_SOC_POSSIBLE_DAIFMT_IB_NF,
};
Switch old method to new method, Current auto select user need to update
.auto_selectable_formats. Fortunately, current few users doesn't have
above limitation. update (A)(B) to (a)(b) style is possible.
a = A
b = A | B
I would like to update method, and add .auto_selectable_formats
support on all drivers.
One note is that auto select might not find best format on some CPU/Codec
combination. So "dai-format" is necessary anyway.
And, there haven't been any big problems on .auto_selectable_formats,
because there were few users.
But if all drivers try to use this, it cannot be denied that they may
encounter unknown problems... In such case, "dai-format" can help, though.
Link: https://patch.msgid.link/87v7bs36m0.wl-kuninori.morimoto.gx@renesas.com
"Simple Audio Card", "Audio Graph Card", "Audio Graph Card2" are
possible to set DAI format via DT.
OTOH, ASoC is supporting .auto_selectable_formats to select DAI
format automatically. Let's recommend to use it on "Audio Graph Card2".
One note is that it keeps supporting DAI format setting via DT.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ik7s36k2.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current DAI supports auto format selection. It allow to have array like
below.
(X) static u64 xxx_auto_formats[] = {
(A) /* First Priority */
SND_SOC_POSSIBLE_DAIFMT_I2S |
SND_SOC_POSSIBLE_DAIFMT_LEFT_J,
/* Second Priority */
(B) SND_SOC_POSSIBLE_DAIFMT_DSP_A |
SND_SOC_POSSIBLE_DAIFMT_DSP_B,
};
It try to find available format from I2S/LEFT_J first (A).
Then, try to find from I2S/LEFT_J/DSP_A/DSP_B if couldn't find (A)+(B).
(OR:ed)
In this method, it can't handle if there is format combination.
For example, some driver has pattern.
Pattern1
I2S/RIFHT_J/LEFT_J (FORMAT) and NB_NF/IB_IF/IB_NF/NB_IF (INV)_
Pattern2
DSP_A/DSP_B (FORMAT) and NB_NF/ IB_NF
Because it will try to OR Pattern1 and Pattern2, un-supported
pattern might be selected.
This patch update method not to use OR, and assumes full format array.
Above sample (X) need to be
static u64 xxx_auto_formats[] = {
/* First Priority */
SND_SOC_POSSIBLE_DAIFMT_I2S |
SND_SOC_POSSIBLE_DAIFMT_LEFT_J,
/* Second Priority */
SND_SOC_POSSIBLE_DAIFMT_I2S |
SND_SOC_POSSIBLE_DAIFMT_LEFT_J |
SND_SOC_POSSIBLE_DAIFMT_DSP_A |
SND_SOC_POSSIBLE_DAIFMT_DSP_B,
};
Note: It doesn't support Multi CPU/Codec for now
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87jys836k8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current auto select format start with the highest priority format and
gradually add lower priority formats one by one, and search matched
format. Like A+X -> A+B+X -> A+B+C+X+Y... (a)
But in this method, we can't handle format if HW has some kind of
patterns, like A+X or B+Y etc (b).
Current drivers are using (a) style, this patch switch to use (b) style.
This is needed before update auto select format method.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87ldco36kf.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current auto select format start with the highest priority format and
gradually add lower priority formats one by one, and search matched
format. Like A+X -> A+B+X -> A+B+C+X+Y... (a)
But in this method, we can't handle format if HW has some kind of
patterns, like A+X or B+Y etc (b).
Current drivers are using (a) style, this patch switch to use (b) style.
This is needed before update auto select format method.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87mrx436kl.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current auto select format start with the highest priority format and
gradually add lower priority formats one by one, and search matched
format. Like A+X -> A+B+X -> A+B+C+X+Y... (a)
But in this method, we can't handle format if HW has some kind of
patterns, like A+X or B+Y etc (b).
Current drivers are using (a) style, this patch switch to use (b) style.
This is needed before update auto select format method.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87o6hk36kp.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Because it is confusable during debugging ASoC FW update, tidyup
auto format style not to use array if single pattern case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87pl2036kt.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
