Interval tree uses [start, end] as a region which stores in the tree.
In raid1, it uses the wrong end value. For example:
bio(A,B) is too big and needs to be split to bio1(A,C-1), bio2(C,B).
The region of bio1 is [A,C] and the region of bio2 is [C,B]. So bio1 and
bio2 overlap which is not right.
Fix this problem by using right end value of the region.
Fixes: d0d2d8ba04 ("md/raid1: introduce wait_for_serialization")
Signed-off-by: Xiao Ni <xni@redhat.com>
Link: https://lore.kernel.org/linux-raid/20260305011839.5118-2-xni@redhat.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
- Revert "tracing: Remove pid in task_rename tracing output"
A change was made to remove the pid field from the task_rename event
because it was thought that it was always done for the current task and
recording the pid would be redundant. This turned out to be incorrect and
there are a few corner case where this is not true and caused some
regressions in tooling.
- Fix the reading from user space for migration
The reading of user space uses a seq lock type of logic where it uses a
per-cpu temporary buffer and disables migration, then enables preemption,
does the copy from user space, disables preemption, enables migration and
checks if there was any schedule switches while preemption was enabled. If
there was a context switch, then it is considered that the per-cpu buffer
could be corrupted and it tries again. There's a protection check that
tests if it takes a hundred tries, it issues a warning and exits out to
prevent a live lock.
This was triggered because the task was selected by the load balancer to
be migrated to another CPU, every time preemption is enabled the migration
task would schedule in try to migrate the task but can't because migration
is disabled and let it run again. This caused the scheduler to schedule out
the task every time it enabled preemption and made the loop never exit
(until the 100 iteration test triggered).
Fix this by enabling and disabling preemption and keeping migration
enabled if the reading from user space needs to be done again. This will
let the migration thread migrate the task and the copy from user space
will likely pass on the next iteration.
- Fix trace_marker copy option freeing
The "copy_trace_marker" option allows a tracing instance to get a copy of
a write to the trace_marker file of the top level instance. This is
managed by a link list protected by RCU. When an instance is removed, a
check is made if the option is set, and if so synchronized_rcu() is
called. The problem is that an iteration is made to reset all the flags to
what they were when the instance was created (to perform clean ups) was
done before the check of the copy_trace_marker option and that option was
cleared, so the synchronize_rcu() was never called.
Move the clearing of all the flags after the check of copy_trace_marker to
do synchronize_rcu() so that the option is still set if it was before and
the synchronization is performed.
- Fix entries setting when validating the persistent ring buffer
When validating the persistent ring buffer on boot up, the number of
events per sub-buffer is added to the sub-buffer meta page. The validator
was updating cpu_buffer->head_page (the first sub-buffer of the per-cpu
buffer) and not the "head_page" variable that was iterating the
sub-buffers. This was causing the first sub-buffer to be assigned the
entries for each sub-buffer and not the sub-buffer that was supposed to be
updated.
- Use "hash" value to update the direct callers
When updating the ftrace direct callers, it assigned a temporary callback
to all the callback functions of the ftrace ops and not just the
functions represented by the passed in hash. This causes an unnecessary
slow down of the functions of the ftrace_ops that is not being modified.
Only update the functions that are going to be modified to call the
ftrace loop function so that the update can be made on those functions.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCacAMahQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qr0sAQCoI4L3iAR5HU1z8dw2GWhOz9fTnzfw
9VPRZAsga9J5xgEA1Y0bvKBM0UPHFAL2POkaILYV1aT00lZ7aIVHPqfdYgA=
=OoGW
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Revert "tracing: Remove pid in task_rename tracing output"
A change was made to remove the pid field from the task_rename event
because it was thought that it was always done for the current task
and recording the pid would be redundant. This turned out to be
incorrect and there are a few corner case where this is not true and
caused some regressions in tooling.
- Fix the reading from user space for migration
The reading of user space uses a seq lock type of logic where it uses
a per-cpu temporary buffer and disables migration, then enables
preemption, does the copy from user space, disables preemption,
enables migration and checks if there was any schedule switches while
preemption was enabled. If there was a context switch, then it is
considered that the per-cpu buffer could be corrupted and it tries
again. There's a protection check that tests if it takes a hundred
tries, it issues a warning and exits out to prevent a live lock.
This was triggered because the task was selected by the load balancer
to be migrated to another CPU, every time preemption is enabled the
migration task would schedule in try to migrate the task but can't
because migration is disabled and let it run again. This caused the
scheduler to schedule out the task every time it enabled preemption
and made the loop never exit (until the 100 iteration test
triggered).
Fix this by enabling and disabling preemption and keeping migration
enabled if the reading from user space needs to be done again. This
will let the migration thread migrate the task and the copy from user
space will likely pass on the next iteration.
- Fix trace_marker copy option freeing
The "copy_trace_marker" option allows a tracing instance to get a
copy of a write to the trace_marker file of the top level instance.
This is managed by a link list protected by RCU. When an instance is
removed, a check is made if the option is set, and if so
synchronized_rcu() is called.
The problem is that an iteration is made to reset all the flags to
what they were when the instance was created (to perform clean ups)
was done before the check of the copy_trace_marker option and that
option was cleared, so the synchronize_rcu() was never called.
Move the clearing of all the flags after the check of
copy_trace_marker to do synchronize_rcu() so that the option is still
set if it was before and the synchronization is performed.
- Fix entries setting when validating the persistent ring buffer
When validating the persistent ring buffer on boot up, the number of
events per sub-buffer is added to the sub-buffer meta page. The
validator was updating cpu_buffer->head_page (the first sub-buffer of
the per-cpu buffer) and not the "head_page" variable that was
iterating the sub-buffers. This was causing the first sub-buffer to
be assigned the entries for each sub-buffer and not the sub-buffer
that was supposed to be updated.
- Use "hash" value to update the direct callers
When updating the ftrace direct callers, it assigned a temporary
callback to all the callback functions of the ftrace ops and not just
the functions represented by the passed in hash. This causes an
unnecessary slow down of the functions of the ftrace_ops that is not
being modified. Only update the functions that are going to be
modified to call the ftrace loop function so that the update can be
made on those functions.
* tag 'trace-v7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ftrace: Use hash argument for tmp_ops in update_ftrace_direct_mod
ring-buffer: Fix to update per-subbuf entries of persistent ring buffer
tracing: Fix trace_marker copy link list updates
tracing: Fix failure to read user space from system call trace events
tracing: Revert "tracing: Remove pid in task_rename tracing output"
pxa: fix broken I2C communication on Armada 3700 with recovery
fsi: fix device_node reference leak in probe
cp2615: fix NULL-deref when serial string is missing
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmm/trAACgkQFA3kzBSg
KbaRxQ//a6yPhI6jQ8NDNnaO3c/RwvLbJsOyh7y7Q3cXl1IVbb6bPEY/PWJBGGeK
XbmtqdT8vR7sh/OoxwSJYH70ZtRi0aWpL5adabiOl8VJhnW3rABrWS5WIBgm9djL
k6p+lnTGNJHWw3PzwVb7lzkgkmyolc2g6qzpTJJd+it39G/ChPTt6vOU6wNgWSMK
auRY59FBRwMkKymMt1co77bmvi/ehFm/Ohsjs4/bGkPr/Ngq6wVtm7tcdu5drShR
VcexM+yu92pLBr7zR/p89E36W7aqWPGl8K7aYyDJjYXDHcOcRJAHjKi4lf+boCNa
ze4dg66Hj6ONVgxOF5lTFGP3ITPg/JP02kskRlVqzJsZdm8hIQraq5eJEUBF0rWZ
WsA/E8SuGeNe3hDck5YyoaNbpww0Ph1y+MgNglMXS/hKedEZL7ku5mU66wA1gjjm
ek18V0rAFiBP3Ch7vTK4Se1CE1TUUSNoPdEwdPU5/3T8ZZLbgRewr4z5FPL2+Yb+
NdGy6ZPV7rRYXxQVVbNTQ9c4h4cuBYZgnrRGfYXyXXyQ77m5mZlMBa4emPoNExtO
9U2fxbfHU2QBTG0lMOWkbEtMc1bVSvYtDwv1X2gFsdkOy+tmyCDkDHsp0hqao0oo
C5rlOYTl/9U6byrpBe8GiCrKHNNmtiuSDJzRUhdXHb8JqqPqp+c=
=m7EX
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- fix broken I2C communication on Armada 3700 with recovery
- fix device_node reference leak in probe (fsi)
- fix NULL-deref when serial string is missing (cp2615)
* tag 'i2c-for-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: pxa: defer reset on Armada 3700 when recovery is used
i2c: fsi: Fix a potential leak in fsi_i2c_probe()
i2c: cp2615: fix serial string NULL-deref at probe
- Improve Qemu MCE-injection behavior by only using
AMD SMCA MSRs if the feature bit is set.
- Fix the relative path of gettimeofday.c inclusion
in vclock_gettime.c
- Fix a boot crash on UV clusters when a socket is
marked as 'deconfigured' which are mapped to the
SOCK_EMPTY (0xffff [short -1]) node ID by the UV firmware,
while Linux APIs expect NUMA_NO_NODE (0xffffffff [int -1]).
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=uIqH
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
- Improve Qemu MCE-injection behavior by only using AMD SMCA MSRs if
the feature bit is set
- Fix the relative path of gettimeofday.c inclusion in vclock_gettime.c
- Fix a boot crash on UV clusters when a socket is marked as
'deconfigured' which are mapped to the SOCK_EMPTY node ID by
the UV firmware, while Linux APIs expect NUMA_NO_NODE.
The difference being (0xffff [unsigned short ~0]) vs [int -1]
* tag 'x86-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/platform/uv: Handle deconfigured sockets
x86/entry/vdso: Fix path of included gettimeofday.c
x86/mce/amd: Check SMCA feature bit before accessing SMCA MSRs
- Fix a PMU driver crash on AMD EPYC systems, caused by
a race condition in x86_pmu_enable()
- Fix a possible counter-initialization bug in x86_pmu_enable()
- Fix a counter inheritance bug in inherit_event() and
__perf_event_read()
- Fix an Intel PMU driver branch constraints handling bug
found by UBSAN
- Fix the Intel PMU driver's new Off-Module Response (OMR)
support code for Diamond Rapids / Nova lake, to fix a snoop
information parsing bug
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=jp5H
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
- Fix a PMU driver crash on AMD EPYC systems, caused by
a race condition in x86_pmu_enable()
- Fix a possible counter-initialization bug in x86_pmu_enable()
- Fix a counter inheritance bug in inherit_event() and
__perf_event_read()
- Fix an Intel PMU driver branch constraints handling bug
found by UBSAN
- Fix the Intel PMU driver's new Off-Module Response (OMR)
support code for Diamond Rapids / Nova lake, to fix a snoop
information parsing bug
* tag 'perf-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix OMR snoop information parsing issues
perf/x86/intel: Add missing branch counters constraint apply
perf: Make sure to use pmu_ctx->pmu for groups
x86/perf: Make sure to program the counter value for stopped events on migration
perf/x86: Move event pointer setup earlier in x86_pmu_enable()
and fix a false positive warning with Clang jump tables.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=W/aM
-----END PGP SIGNATURE-----
Merge tag 'objtool-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fixes from Ingo Molnar:
"Fix three more livepatching related build environment bugs, and a
false positive warning with Clang jump tables"
* tag 'objtool-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix Clang jump table detection
livepatch/klp-build: Fix inconsistent kernel version
objtool/klp: fix mkstemp() failure with long paths
objtool/klp: fix data alignment in __clone_symbol()
caused by the locking context-analysis changes.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmm/ovMRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1hiMA/+MiNrnVNtbLBib1HOeYeli7MLFZ4VqTj5
MPHvRPXX/RyfFYa1pr9tQZUOMa7xTL8Dk5qiyQ1gDvCKrT16LR8/7sNelK395csz
WJIzb4Ec4ugIQXtS3hUhNLc4yffGmLd2aSV66OomSEQ7wDD5+yXtyq7rXeX2bYAt
kTQ6OR0WanHIgrBRJWrFazYhBt0ZNNDfEczjbbDY/816qG/6Q46G+NiTDKWV0G83
8Ll7FrIVBj8q+8XlzUDmmbDP9eCMGK2Nj++l7AlUqxPO0qNo+8PpQseOp7qoOerx
IAE6fOHPuY/VnAJYHc/hnCVN92Dzs4UQjpYXCL7bME7TdiIVVDfE4mACa/47O6K1
ifyWxM8RM4UWEeb1QRb73VgLvl8v9biul0twBjnRXW0bFCHCm8s7qR/1HSU7y/wf
3C55EtjV3uKyNAqHlwrtLQv+RdYjgxzKWTjcNp0kz5eoE1Bs1KLX3xwZR5xN6/jO
EYVZCp480wphYc0rs7+FNerYDQW3RXDhZMTei19De8OPDeQPYxAGkscyyCgwguyR
ks8FEFAYJgT9c9tLU44ziZG56zeOqJcj2mq95er6XpOzVyn2txLD2YDpoyE3mB55
pTwzLT3I4I75eB6l5IQObqliQkxK3i9LNELWZiHVP97LPsukTSbiFvCBso7mmi+2
Eg2Vcp/RqD8=
=o1hi
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
"Fix a sparse build error regression in <linux/local_lock_internal.h>
caused by the locking context-analysis changes"
* tag 'locking-urgent-2026-03-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
include/linux/local_lock_internal.h: Make this header file again compatible with sparse
The call to mipi_dsi_host_register triggers a callback to mtk_dsi_bind,
which uses dev_get_drvdata to retrieve the mtk_dsi struct, so this
structure needs to be stored inside the driver data before invoking it.
As drvdata is currently uninitialized it leads to a crash when
registering the DSI DRM encoder right after acquiring
the mode_config.idr_mutex, blocking all subsequent DRM operations.
Fixes the following crash during mediatek-drm probe (tested on Xiaomi
Smart Clock x04g):
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000040
[...]
Modules linked in: mediatek_drm(+) drm_display_helper cec drm_client_lib
drm_dma_helper drm_kms_helper panel_simple
[...]
Call trace:
drm_mode_object_add+0x58/0x98 (P)
__drm_encoder_init+0x48/0x140
drm_encoder_init+0x6c/0xa0
drm_simple_encoder_init+0x20/0x34 [drm_kms_helper]
mtk_dsi_bind+0x34/0x13c [mediatek_drm]
component_bind_all+0x120/0x280
mtk_drm_bind+0x284/0x67c [mediatek_drm]
try_to_bring_up_aggregate_device+0x23c/0x320
__component_add+0xa4/0x198
component_add+0x14/0x20
mtk_dsi_host_attach+0x78/0x100 [mediatek_drm]
mipi_dsi_attach+0x2c/0x50
panel_simple_dsi_probe+0x4c/0x9c [panel_simple]
mipi_dsi_drv_probe+0x1c/0x28
really_probe+0xc0/0x3dc
__driver_probe_device+0x80/0x160
driver_probe_device+0x40/0x120
__device_attach_driver+0xbc/0x17c
bus_for_each_drv+0x88/0xf0
__device_attach+0x9c/0x1cc
device_initial_probe+0x54/0x60
bus_probe_device+0x34/0xa0
device_add+0x5b0/0x800
mipi_dsi_device_register_full+0xdc/0x16c
mipi_dsi_host_register+0xc4/0x17c
mtk_dsi_probe+0x10c/0x260 [mediatek_drm]
platform_probe+0x5c/0xa4
really_probe+0xc0/0x3dc
__driver_probe_device+0x80/0x160
driver_probe_device+0x40/0x120
__driver_attach+0xc8/0x1f8
bus_for_each_dev+0x7c/0xe0
driver_attach+0x24/0x30
bus_add_driver+0x11c/0x240
driver_register+0x68/0x130
__platform_register_drivers+0x64/0x160
mtk_drm_init+0x24/0x1000 [mediatek_drm]
do_one_initcall+0x60/0x1d0
do_init_module+0x54/0x240
load_module+0x1838/0x1dc0
init_module_from_file+0xd8/0xf0
__arm64_sys_finit_module+0x1b4/0x428
invoke_syscall.constprop.0+0x48/0xc8
do_el0_svc+0x3c/0xb8
el0_svc+0x34/0xe8
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
Code: 52800022 941004ab 2a0003f3 37f80040 (29005a80)
Fixes: e4732b590a ("drm/mediatek: dsi: Register DSI host after acquiring clocks and PHY")
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20260225094047.76780-1-l.scorcia@gmail.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
While this configuration is otherwise identical to mt8173, according
to Android kernel sources, this SoC does need smi_id_en.
Signed-off-by: Val Packett <val@packett.cool>
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/5f880f1334aa93184afee3e36132ca42628821fb.1771863641.git.l.scorcia@gmail.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Add support for the MediaTek mt8167 SoC: the DSI PHY found
in this chip is fully compatible with the one found in the mt2701 SoC.
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/92530e0a31eca1feb822f5c5fd4ac894937dd6c7.1771863641.git.l.scorcia@gmail.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
If a device has a framebuffer available it might be already used as
display by simple-framebuffer or simpledrm when mediatek-drm is probed.
This is actually helpful when porting to a new device as
framebuffers are simple to setup in device trees and fbcon can be
used to monitor the kernel boot process.
When drm-mediatek loads a new fb device is initialized, however
fbcon remains attached to the initial framebuffer which is no longer
connected to the actual display - the early fb is never removed.
We can gracefully transition from framebuffer handling to drm-managed
display by calling aperture_remove_all_conflicting_devices before
registering mediatek-drm. This takes care of unloading other fb
devices/drivers and disconnects fbcon which then automatically
reconnects to mediatekdrmfb as soon as it's available.
The function is invoked just before drm_dev_register() to kick out
the existing framebuffer as late as possible to reduce the time the
screen is unresponsive.
Signed-off-by: Luca Leonardo Scorcia <l.scorcia@gmail.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20260212192605.263160-1-l.scorcia@gmail.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Parse optional maxim,rfs-ohms values to derive the per-channel output
current scale (mA per step) for the IIO current ABI.
Behavior changes:
- If maxim,rfs-ohms is present, IIO_CHAN_INFO_SCALE becomes available
and reports mA/step derived from Rfs.
- If maxim,rfs-ohms is missing, SCALE is not exposed to keep older DTs
working without requiring updates.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The Maxim DS4422/DS4424 and DS4402/DS4404 current DACs determine their
full-scale output current via external resistors (Rfs) connected to the
FSx pins. Without knowing these values, the full-scale range of the
hardware is undefined.
Add the 'maxim,rfs-ohms' property to describe these physical components.
This property is required to provide a complete description of the
hardware configuration.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Refactor the driver to use the regmap API.
Replace the driver-specific mutex and manual shadow buffers with the
standard regmap infrastructure for locking and caching.
This ensures the cache is populated from hardware at probe, preventing
state desynchronization (e.g. across suspend/resume).
Define access tables to validate the different register maps of DS44x2
and DS44x4.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The DS4402/DS4404 variants operate with a 5-bit resolution (31 steps),
whereas the DS4422/DS4424 support 7-bit (127 steps).
Previously, the driver enforced a hardcoded 7-bit mask (DS4424_DAC_MASK)
for all variants. This allowed users to write values exceeding the 5-bit
range to DS4402/DS4404 devices, resulting in silent truncation or
undefined behavior.
Add a `result_mask` field to the chip_info structure to define the valid
data range for each variant. Use this mask to:
1. Correctly mask register values in read_raw().
2. Return -EINVAL in write_raw() if the input value exceeds the
variant's capabilities.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add I2C/OF IDs for DS4402 and DS4404 and set the correct channel count.
Follow-up changes add per-variant scaling based on external Rfs.
Co-developed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David Jander <david@protonic.nl>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add compatible strings for Maxim DS4402 and DS4404 current DACs.
These devices are 5-bit variants of the DS4422/DS4424 family.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The DS4422/DS4424 and DS4402/DS4404 datasheets do not specify a minimum
delay between power-up (POR) and the availability of the I2C interface.
The driver previously used `usleep_range(1000, 1200)` to enforce a ~1ms
delay. Replace this with `fsleep(1000)` to allow the kernel to select
the most efficient sleep mechanism while retaining the existing
conservative delay to ensure device readiness.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Some bridges, such as the TI SN65DSI83, require the HS clock to be
running in order to lock its PLL during its own pre-enable function.
Without this change, the bridge gives the following error:
sn65dsi83 14-002c: failed to lock PLL, ret=-110
sn65dsi83 14-002c: Unexpected link status 0x01
sn65dsi83 14-002c: reset the pipe
Move the necessary functions from enable to pre-enable.
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Tested-by: Chen-Yu Tsai <wenst@chromium.org> # Chromebooks
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20260120-mtkdsi-v1-1-b0f4094f3ac3@gmail.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Refactor the driver to use device match data instead of checking ID enums
in a switch statement.
Define a `ds4424_chip_info` structure to hold variant-specific attributes
(currently just the channel count) and attach it directly to the I2C and
OF device ID tables.
This simplifies the probe function and makes it easier to add support for
new variants like DS4402/DS4404.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Rename the static `ds4424_info` structure to `ds4424_iio_info`.
The previous name was generic and could be confused with chip-specific
data structures (like the upcoming `ds4424_chip_info`). The new name
explicitly indicates that this structure holds the IIO framework
callbacks.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Sort the header inclusions alphabetically. This improves readability and
simplifies adding new includes in the future.
Group subsystem-specific headers (linux/iio/*) separately at the end
to clarify subsystem context.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Replace pr_err() with dev_err_ratelimited() in the RAW read path to avoid
log spam on repeated I2C failures and to include the device context.
Use %pe to print errno names for faster debugging. Use the parent
device context to identify the physical hardware causing the error.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Refactor the raw access logic to use standard GENMASK() and BIT()
macros. Use abs() for magnitude calculation to simplify the logic and
make the data flow clearer.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmm3G/UeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGZJUH/R0vQ3Vha48QDEic
1NREwaHxAoTFi0i3y7OPPklqrP2V09D1qg4Q6fExYQVTQgV6F2DRjVbyPKrmr4ay
BA6aHrUdnFngYHpDlI1b1r7rJiAIN4WFHl7StO70bS+EB+UPsP9cfP3CKXUfKfqT
kyHXzUrd5QnjYmlb9rQw1E6rzsRamNtGUtZf7TwDidJYjtm3sPeDHUkjyRy4xkYd
UouIu6W7UXoicl38bJAgaWBY5BiYtjN6ktnY4/gcqDeqYd7mTM3Eb1B+OSXgFfip
F0OYfJhfWn+63WnPA+1I5jXWC1UrdVXTMK/NTYjhmGlfdmkLcWDlNGtu+qKZbpwj
fmF3Kyo=
=6nX1
-----END PGP SIGNATURE-----
Merge tag 'v7.0-rc4' into togreg
Linux 7.0-rc4
Required for the ds4422 series which is build upon;
5187e03b81 ("iio: dac: ds4424: reject -128 RAW value")
The DMA channel was requested in nxp_sar_adc_buffer_postenable() but
was only released in nxp_sar_adc_buffer_software_do_predisable().
This caused a DMA channel resource leak when operating in trigger mode.
Fix this by moving dma_request_chan() from
nxp_sar_adc_buffer_postenable() into
nxp_sar_adc_buffer_software_do_postenable(), ensuring the DMA channel
is only requested in software mode.
Fixes: 4434072a89 ("iio: adc: Add the NXP SAR ADC support for the s32g2/3 platforms")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
On the J721S2 platform, pinctrl contexts must be saved and restored during
suspend-to-ram, just like on the J7200. So use ti,j7200-padconf compatible.
Signed-off-by: Thomas Richard (TI) <thomas.richard@bootlin.com>
Link: https://patch.msgid.link/20260313-j721s2-s2r-pinctrl-v1-1-a6f80c641037@bootlin.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Add an overlay to use the PEB-AV-15 AV-Adapter. It's a small expansion board
using a Lontium LT8912B DSI->HDMI bridge and a TLV320AIC3007 audio codec.
Signed-off-by: Dominik Haller <d.haller@phytec.de>
Link: https://patch.msgid.link/20260320212349.420951-6-d.haller@phytec.de
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Add the second DSI instance and its corresponding phy to the main domain
include file.
Signed-off-by: Dominik Haller <d.haller@phytec.de>
Reviewed-by: Beleswar Padhi <b-padhi@ti.com>
Link: https://patch.msgid.link/20260320212349.420951-5-d.haller@phytec.de
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Add the TI SN65DSI83 MIPI-DSI->LVDS bridge that can be populated on the
phyCORE-AM68x/TDA4x.
Signed-off-by: Dominik Haller <d.haller@phytec.de>
Link: https://patch.msgid.link/20260320212349.420951-3-d.haller@phytec.de
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Assign the dss clocks in the base dts so that display overlays can be
used in any combination.
Signed-off-by: Dominik Haller <d.haller@phytec.de>
Link: https://patch.msgid.link/20260320212349.420951-2-d.haller@phytec.de
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Verdin AM62 board does not have external pullups on eMMC DAT1-DAT7 pins.
Enable internal pullups on DAT1-DAT7 considering:
- without a host-side pullup, these lines rely solely on the eMMC
device's internal pullup (R_int, 10kohm-150kohm per JEDEC), which may
exceed the recommended 50kohm max for 1.8V VCCQ
- JEDEC JESD84-B51 Table 200 requires host-side pullups (R_DAT,
10kohm-100kohm) on all data lines to prevent bus floating
Fixes: 316b80246b ("arm64: dts: ti: add verdin am62")
Cc: stable@vger.kernel.org
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://patch.msgid.link/20260320073032.10427-1-francesco@dolcini.it
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Use the proper kernel-doc format and struct member names to avoid
kernel-doc warnings:
Warning: include/linux/iio/common/st_sensors.h:184 struct member 'int1'
not described in 'st_sensor_data_ready_irq'
Warning: ../include/linux/iio/common/st_sensors.h:184 struct member 'int2'
not described in 'st_sensor_data_ready_irq'
Warning: ../include/linux/iio/common/st_sensors.h:184 struct member
'stat_drdy' not described in 'st_sensor_data_ready_irq'
Warning: ../include/linux/iio/common/st_sensors.h:184 struct member 'ig1'
not described in 'st_sensor_data_ready_irq'
Warning: ../include/linux/iio/common/st_sensors.h:219 struct member
'num_ch' not described in 'st_sensor_settings'
Warning: ../include/linux/iio/common/st_sensors.h:263 struct member
'num_data_channels' not described in 'st_sensor_data'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Check the return value of the FIFO bypass regmap_write() before
proceeding to disable interrupts.
Fixes: ff8093fa6b ("iio: accel: adxl313: add buffered FIFO watermark with interrupt handling")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Return the error code from regmap_bulk_read() instead of 0 so
that I/O failures are properly propagated.
Fixes: cbbb819837 ("iio: dac: ad5770r: Add AD5770R support")
Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Temperature was wrongly represented as 12-bit signed, confirmed by checking
the datasheet. Even if the temperature is negative, the value in the
register stays unsigned.
Fixes: 12ed27863e iio: accel: Add driver support for ADXL355
Signed-off-by: Valek Andrej <andrej.v@skyrain.eu>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The sys_foo() naming scheme used by the syscall wrappers may collide
with application symbols. Especially as 'sys_' is an obvious naming
scheme an application may choose for its own custom systemcall wrappers.
Avoid these conflicts by using an leading underscore which moves the
names into the implementation's namespace. This naming scheme was chosen
over a '__nolibc_' prefix, as these functions are not an implementation
detail but a documented interface meant to be used by applications.
While this may break some existing users, adapting them should be
straightforward. Given that nolibc is most-likely vendored, no
unexpected breakage should happen. No in-tree users are affected.
These conflicts happen when compiling some of the kernel selftests
with nolibc.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260319-nolibc-namespacing-v1-1-33c22eaddb5e@weissschuh.net
Users might use -Wundef, so also use it in the nolibc testsuite to
ensure no warnings are triggered.
The existing line with warning options is getting too long,
so move all warnings to a dedicated line.
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://patch.msgid.link/20260318-nolibc-wundef-v1-2-fcb7f9ac7298@weissschuh.net
With -std=c89 the macro __STDC_VERSION__ is not defined.
While undefined identifiers in '#if' directives are assumed to be '0',
with -Wundef a warning is emitted.
Avoid the warning by explicitly falling back to '0' if __STDC_VERSION__
is not provided by the preprocessor.
Fixes: 37219aa5b1 ("tools/nolibc: add __nolibc_static_assert()")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260318-nolibc-wundef-v1-1-fcb7f9ac7298@weissschuh.net
Add support for the GNU extensions 'program_invocation_name' and
'program_invocation_short_name'. These are useful to print error
messages, which by convention include the program name.
As these are global variables which take up memory even if not used,
similar to 'errno', gate them behind NOLIBC_IGNORE_ERRNO.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://patch.msgid.link/20260318-nolibc-err-h-v4-1-08247a694bd9@weissschuh.net
Instead of defining REALLY_SLOW_IO before including io.h, add the
required additional calls of native_io_delay() to the related functions
in arch/x86/include/asm/floppy.h.
Drop REALLY_SLOW_IO now too as it has no users.
[ bp: Merge the REALLY_SLOW_IO removal into this patch. ]
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/20260119182632.596369-4-jgross@suse.com
The io_delay() paravirt hook is in no way performance critical and all users
setting it to a different function than native_io_delay() are using an empty
function as replacement.
Allow replacing the hook with a bool indicating whether native_io_delay()
should be called.
[ bp: Massage commit message. ]
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/20260119182632.596369-3-jgross@suse.com
Commit
22cc5ca5de ("x86/paravirt: Move halt paravirt calls under CONFIG_PARAVIRT")
moved some paravirt hooks from the CONFIG_PARAVIRT_XXL umbrella to
CONFIG_PARAVIRT, but missed to move the associated "#include <asm/paravirt.h>"
in irqflags.h from CONFIG_PARAVIRT_XXL to CONFIG_PARAVIRT.
This hasn't resulted in build failures yet, as all use cases of irqflags.h had
paravirt.h included via other header files, even without CONFIG_PARAVIRT_XXL
being set.
In order to allow changing those other header files, e.g. by no longer
including paravirt.h, fix irqflags.h by moving inclusion of paravirt.h under
the CONFIG_PARAVIRT umbrella.
[ bp: Massage commit message. ]
Fixes: 22cc5ca5de ("x86/paravirt: Move halt paravirt calls under CONFIG_PARAVIRT")
Closes: https://lore.kernel.org/oe-kbuild-all/202601152203.plJOoOEF-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://patch.msgid.link/20260119182632.596369-2-jgross@suse.com
The counter driver can use HW channels 1 and 2, while the PWM driver can
use HW channels 0, 1, 2, 3, 4, 6, 7.
The dev member is assigned both by the counter driver and the PWM driver
for channels 1 and 2, to their own struct device instance, overwriting
the previous value.
The sub-drivers race to assign their own struct device pointer to the
same struct rz_mtu3_channel's dev member.
The dev member of struct rz_mtu3_channel is used by the counter
sub-driver for runtime PM.
Depending on the probe order of the counter and PWM sub-drivers, the
dev member may point to the wrong struct device instance, causing the
counter sub-driver to do runtime PM actions on the wrong device.
To fix this, use the parent pointer of the counter, which is assigned
during probe to the correct struct device, not the struct device pointer
inside the shared struct rz_mtu3_channel.
Cc: stable@vger.kernel.org
Fixes: 0be8907359 ("counter: Add Renesas RZ/G2L MTU3a counter driver")
Signed-off-by: Cosmin Tanislav <cosmin-gabriel.tanislav.xa@renesas.com>
Link: https://lore.kernel.org/r/20260130122353.2263273-6-cosmin-gabriel.tanislav.xa@renesas.com
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
