The RTL8224 has a register to configure a pair swap (from ABCD order to
DCBA) providing PCB designers more flexbility when wiring the chip. The
swap parameter has to be set correctly for each of the 4 ports before
the chip can detect a link.
After a reset, this register is (unfortunately) left in a random state,
thus it has to be initialized. On most of the devices the bootloader
does it once for all and we can rely on the value set, on some other it
is not and the kernel has to do it.
The MDI pair swap can be set in the device tree using the property
enet-phy-pair-order. The property is set to 0 to keep the default order
(ABCD), or 1 to reverse the pairs (DCBA).
Signed-off-by: Damien Dejean <dam.dejean@gmail.com>
Link: https://patch.msgid.link/20260318215502.106528-3-dam.dejean@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add property enet-phy-pair-order to the device tree bindings to define
the pair order of the PHY. To simplify PCB design some manufacturers
allow to wire the pairs in a reverse order, and change the order in
software.
The property can be set to 0 to force the normal pair order (ABCD), or 1
to force the reverse pair order (DCBA).
Signed-off-by: Damien Dejean <dam.dejean@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260318215502.106528-2-dam.dejean@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Most local #include in the ethtool command handling is out of order,
with either :
#include "netlink.h"
#include "common.h"
or even :
#include "netlink.h"
#include "common.h"
#include "bitset.h"
One of the reasons is because bitset.h s lacking definitions for
nlattr, netlink_ext_ack, ETH_GSTRING_LEN, and types such as u32, bool,
etc.
Make bitset.h standalone by including <linux/ethtool.h> for
ETH_GSTRING_LEN, and <linux/netlink.h> for nlattr, netlink_ext_ack and
the rest.
While at it, take a pass on ethnl sources to re-order the local
includes :
- put them after the global includes
- add a newline between global and local includes
- alpha-sort the local includes
One notable exception is the cmis.h include, that needs definitions from
module_fw.h. Keep them in this order for now.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260319180555.1531386-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Justin Chen says:
====================
net: bcmasp: Fix issues during driver unbind
Fix two issues when we unbind the driver. We hit a double free of the
WoL irq and a double disable of the clk.
====================
Link: https://patch.msgid.link/20260319234813.1937315-1-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Switch to devm_clk_get_optional() so we can manage the clock ourselves.
We dynamically control the clocks depending on the state of the interface
for power savings. The default state is clock disabled, so unbinding the
driver causes a double disable.
Fixes: 490cb41200 ("net: bcmasp: Add support for ASP2.0 Ethernet controller")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260319234813.1937315-3-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We do not need to free wol_irq since it was instantiated with
devm_request_irq(). So devres will free for us.
Fixes: a2f0751206 ("net: bcmasp: Add support for WoL magic packet")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260319234813.1937315-2-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sabrina Dubroca says:
====================
rtnetlink: add missing attributes in if_nlmsg_size
Once again we have some attributes added by rtnl_fill_ifinfo() that
aren't counted in if_nlmsg_size().
====================
Link: https://patch.msgid.link/cover.1773919462.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rtnl_link_get_slave_info_data_size counts IFLA_INFO_SLAVE_DATA, but
rtnl_link_slave_info_fill adds both IFLA_INFO_SLAVE_DATA and
IFLA_INFO_SLAVE_KIND.
Fixes: ba7d49b1f0 ("rtnetlink: provide api for getting and setting slave info")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://patch.msgid.link/049843b532e23cde7ddba263c0bbe35ba6f0d26d.1773919462.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
smc_rx_splice() allocates one smc_spd_priv per pipe_buffer and stores
the pointer in pipe_buffer.private. The pipe_buf_operations for these
buffers used .get = generic_pipe_buf_get, which only increments the page
reference count when tee(2) duplicates a pipe buffer. The smc_spd_priv
pointer itself was not handled, so after tee() both the original and the
cloned pipe_buffer share the same smc_spd_priv *.
When both pipes are subsequently released, smc_rx_pipe_buf_release() is
called twice against the same object:
1st call: kfree(priv) sock_put(sk) smc_rx_update_cons() [correct]
2nd call: kfree(priv) sock_put(sk) smc_rx_update_cons() [UAF]
KASAN reports a slab-use-after-free in smc_rx_pipe_buf_release(), which
then escalates to a NULL-pointer dereference and kernel panic via
smc_rx_update_consumer() when it chases the freed priv->smc pointer:
BUG: KASAN: slab-use-after-free in smc_rx_pipe_buf_release+0x78/0x2a0
Read of size 8 at addr ffff888004a45740 by task smc_splice_tee_/74
Call Trace:
<TASK>
dump_stack_lvl+0x53/0x70
print_report+0xce/0x650
kasan_report+0xc6/0x100
smc_rx_pipe_buf_release+0x78/0x2a0
free_pipe_info+0xd4/0x130
pipe_release+0x142/0x160
__fput+0x1c6/0x490
__x64_sys_close+0x4f/0x90
do_syscall_64+0xa6/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
BUG: kernel NULL pointer dereference, address: 0000000000000020
RIP: 0010:smc_rx_update_consumer+0x8d/0x350
Call Trace:
<TASK>
smc_rx_pipe_buf_release+0x121/0x2a0
free_pipe_info+0xd4/0x130
pipe_release+0x142/0x160
__fput+0x1c6/0x490
__x64_sys_close+0x4f/0x90
do_syscall_64+0xa6/0x1a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Kernel panic - not syncing: Fatal exception
Beyond the memory-safety problem, duplicating an SMC splice buffer is
semantically questionable: smc_rx_update_cons() would advance the
consumer cursor twice for the same data, corrupting receive-window
accounting. A refcount on smc_spd_priv could fix the double-free, but
the cursor-accounting issue would still need to be addressed separately.
The .get callback is invoked by both tee(2) and splice_pipe_to_pipe()
for partial transfers; both will now return -EFAULT. Users who need
to duplicate SMC socket data must use a copy-based read path.
Fixes: 9014db202c ("smc: add support for splice()")
Signed-off-by: Qi Tang <tpluszz77@gmail.com>
Link: https://patch.msgid.link/20260318064847.23341-1-tpluszz77@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A warm reset on boards using an EEPROM-only strap configuration (where
no MAC address is set in the image) can cause the driver to incorrectly
revert to RGMII mode. This occurs because the ENET_CONFIG_LOAD_STARTED
bit may not persist or behave as expected.
Update pci11x1x_strap_get_status() to use revision-specific validation:
- For PCI11x1x A0: Continue using the legacy check (config load started
or reset protection) to validate the SGMII strap.
- For PCI11x1x B0 and later: Use the newly available
STRAP_READ_USE_SGMII_EN_ bit in the upper strap register to validate
the lower SGMII_EN bit.
This ensures the SGMII interface is correctly identified even after a
warm reboot.
Signed-off-by: Thangaraj Samynathan <thangaraj.s@microchip.com>
Link: https://patch.msgid.link/20260318063228.17110-1-thangaraj.s@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
validate_set() accepted OVS_KEY_ATTR_MPLS as variable-sized payload for
SET/SET_MASKED actions. In action handling, OVS expects fixed-size
MPLS key data (struct ovs_key_mpls).
Use the already normalized key_len (masked case included) and reject
non-matching MPLS action key sizes.
Reject invalid MPLS action payload lengths early.
Fixes: fbdcdd78da ("Change in Openvswitch to support MPLS label depth of 3 in ingress direction")
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Tested-by: Ao Zhou <n05ec@lzu.edu.cn>
Co-developed-by: Yuan Tan <tanyuan98@outlook.com>
Signed-off-by: Yuan Tan <tanyuan98@outlook.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Yang Yang <n05ec@lzu.edu.cn>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20260319080228.3423307-1-n05ec@lzu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ovs_netdev_tunnel_destroy() may run after NETDEV_UNREGISTER already
detached the device. Dropping the netdev reference in destroy can race
with concurrent readers that still observe vport->dev.
Do not release vport->dev in ovs_netdev_tunnel_destroy(). Instead, let
vport_netdev_free() drop the reference from the RCU callback, matching
the non-tunnel destroy path and avoiding additional synchronization
under RTNL.
Fixes: a9020fde67 ("openvswitch: Move tunnel destroy function to oppenvswitch module.")
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Tested-by: Ao Zhou <n05ec@lzu.edu.cn>
Co-developed-by: Yuan Tan <tanyuan98@outlook.com>
Signed-off-by: Yuan Tan <tanyuan98@outlook.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Yang Yang <n05ec@lzu.edu.cn>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20260319074241.3405262-1-n05ec@lzu.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bobby Eshleman says:
====================
selftests/vsock: support nested VM runner for vmtest.sh
This series fixes a few issues trying to launch vmtest.sh in a nested VM
environment and were discovered when trying to prepare the tests for
netdev CI/CD.
When taken together these patches make vmtest.sh work both on bare metal
and in nested VMs, regardless of the outer VM's user, coincidental path
overlaps, or filesystem settings.
====================
Link: https://patch.msgid.link/20260317-vsock-vmtest-nested-fixes-v2-0-0b3f53b80a0f@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The /root mount introduced for nested VM support shadows any host paths
under /root. This breaks systems where the outer VM runs as root and the
vsock_test binary path is something like:
/root/linux/tools/testing/selftests/vsock/vsock_test
Fix this by copying vsock_test into the temporary home directory that
gets mounted as /root in the guest, and using a relative path to invoke
it.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260317-vsock-vmtest-nested-fixes-v2-2-0b3f53b80a0f@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When running vmtest.sh inside a nested VM, there occurs a problem
with stacking two sets of virtiofs/overlay layers (the first set from
the outer VM and the second set from the inner VM). The virtme init
scripts (sshd, udhcpd, etc...) fail to execute basic programs (e.g.,
/bin/cat) and load library dependencies (e.g., libpam) due to ESTALE.
This only occurs when both layers (outer and inner) use virtiofs. Work
around this by using 9p in the inner VM via --force-9p.
Additionally, when the outer VM is read-only, the inner VM's attempt at
populating SSH keys to the root filesystem fails:
virtme-ng-init: mkdir: cannot create directory '/root/.cache': Read-only file system
Work around this by creating a temporary home directory with generated
SSH keys and passing it through to the guest as /root via --rwdir.
Disable strict host key checking in vm_ssh() since the VM will be seen
as a new host each run.
The --rw arg had to be removed to prevent a vng complaint about overlay
(in combination with the other parameters). The guest doesn't really
need write access anyway, so this was probably overly permissive to
begin with.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260317-vsock-vmtest-nested-fixes-v2-1-0b3f53b80a0f@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bonding_priv.h only defined DRV_NAME and DRV_DESCRIPTION, but caused
unnecessary recompilation: it included <generated/utsrelease.h> to
define bond_version, which is used solely in bond_procfs.c. With
CONFIG_LOCALVERSION_AUTO=y, utsrelease.h is regenerated on every git
commit, so any git operation triggered recompilation of bond_main.c
which also included bonding_priv.h.
Remove the header entirely, as suggested by Jakub, given the macros on
this file can be integrated into the C files directly.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260318-bond_uts-v2-1-033fe0d4e903@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add debug for the phy_config_inband() call so we can see which inband
modes are being configured at the PHY.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1w2mFk-0000000DXW2-2PR9@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before this patch, the PPE cpu port configuration used for a specific GDM
device was set just running ndo_init() callback during the device
initialization. The selected PPE cpu port configuration depends on the QDMA
block assigned to the GDM port. The QDMA block is selected according to
the GDM port LAN/WAN configuration as specified in the commit
'8737d7194d ("net: airoha: select QDMA block according LAN/WAN
configuration"). However, the user selected PPE cpu port configuration can
be different with respect to the one hardcoded in the NPU firmware binary.
The hardcoded NPU PPE cpu port configuration is loaded initializing the PPE
engine running the NPU ops ppe_init() callback in airoha_ppe_offload_setup
routine (this is executed at runtime by the netfilter flowtable
infrastructure during flow offloading).
Reset the PPE cpu port configuration in airoha_ppe_hw_init routine in
order to apply the user requested setup according to the device DTS.
Please note this patch is fixing an issue not visible to the user (so we
do not need to backport it) since airoha_eth driver currently supports just
the internal phy available via the MT7530 DSA switch and there are no WAN
interfaces officially supported since PCS/external phy is not merged
mainline yet (it will be posted with following patches).
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260317-airoha-fix-ppe-def-cpu-v1-1-338533d8e234@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The write loop in mxl862xx_api_wrap() computes the word count as
(size + 1) / 2, rounding up for odd-sized structs.
On the last iteration of an odd-sized buffer it reads a full __le16
from data[i], accessing one byte past the end of the caller's struct.
KASAN catches this as a stack-out-of-bounds read during probe (e.g.
from mxl862xx_bridge_config_fwd() because of the odd length of
sizeof(struct mxl862xx_bridge_config) == 49).
The read-back loop already handles this case, it writes only a single
byte when (i * 2 + 1) == size. The write loop lacked the same guard.
In practice the over-read is harmless: the extra stack byte is sent to
the firmware which ignores trailing data beyond the command's declared
payload size.
Apply the same odd-size last-byte handling to the write path: when the
final word contains only one valid byte, send *(u8 *)&data[i] instead
of le16_to_cpu(data[i]). This is endian-safe because data is
__le16-encoded and the low byte is always at the lowest address
regardless of host byte order.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/83356ad9c9a4470dd49b6b3d661c2a8dd85cc6a1.1773803190.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kevin Hao says:
====================
net: macb: Fix two lock warnings when WOL is used
This patch series addresses two lock warnings that occur when using WOL as a
wakeup source on my AMD ZynqMP board.
====================
Link: https://patch.msgid.link/20260318-macb-irq-v2-0-f1179768ab24@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Access to net_device::ip_ptr and its associated members must be
protected by an RCU lock. Since we are modifying this piece of code,
let's also move it to execute only when WAKE_ARP is enabled.
To minimize the duration of the RCU lock, a local variable is used to
temporarily store the IP address. This change resolves the following
RCU check warning:
WARNING: suspicious RCU usage
7.0.0-rc3-next-20260310-yocto-standard+ #122 Not tainted
-----------------------------
drivers/net/ethernet/cadence/macb_main.c:5944 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
5 locks held by rtcwake/518:
#0: ffff000803ab1408 (sb_writers#5){.+.+}-{0:0}, at: vfs_write+0xf8/0x368
#1: ffff0008090bf088 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0xbc/0x1c8
#2: ffff00080098d588 (kn->active#70){.+.+}-{0:0}, at: kernfs_fop_write_iter+0xcc/0x1c8
#3: ffff800081c84888 (system_transition_mutex){+.+.}-{4:4}, at: pm_suspend+0x1ec/0x290
#4: ffff0008009ba0f8 (&dev->mutex){....}-{4:4}, at: device_suspend+0x118/0x4f0
stack backtrace:
CPU: 3 UID: 0 PID: 518 Comm: rtcwake Not tainted 7.0.0-rc3-next-20260310-yocto-standard+ #122 PREEMPT
Hardware name: ZynqMP ZCU102 Rev1.1 (DT)
Call trace:
show_stack+0x24/0x38 (C)
__dump_stack+0x28/0x38
dump_stack_lvl+0x64/0x88
dump_stack+0x18/0x24
lockdep_rcu_suspicious+0x134/0x1d8
macb_suspend+0xd8/0x4c0
device_suspend+0x218/0x4f0
dpm_suspend+0x244/0x3a0
dpm_suspend_start+0x50/0x78
suspend_devices_and_enter+0xec/0x560
pm_suspend+0x194/0x290
state_store+0x110/0x158
kobj_attr_store+0x1c/0x30
sysfs_kf_write+0xa8/0xd0
kernfs_fop_write_iter+0x11c/0x1c8
vfs_write+0x248/0x368
ksys_write+0x7c/0xf8
__arm64_sys_write+0x28/0x40
invoke_syscall+0x4c/0xe8
el0_svc_common+0x98/0xf0
do_el0_svc+0x28/0x40
el0_svc+0x54/0x1e0
el0t_64_sync_handler+0x84/0x130
el0t_64_sync+0x198/0x1a0
Fixes: 0cb8de39a7 ("net: macb: Add ARP support to WOL")
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://patch.msgid.link/20260318-macb-irq-v2-2-f1179768ab24@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The devm_free_irq() and devm_request_irq() functions should not be
executed in an atomic context.
During device suspend, all userspace processes and most kernel threads
are frozen. Additionally, we flush all tx/rx status, disable all macb
interrupts, and halt rx operations. Therefore, it is safe to split the
region protected by bp->lock into two independent sections, allowing
devm_free_irq() and devm_request_irq() to run in a non-atomic context.
This modification resolves the following lockdep warning:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 501, name: rtcwake
preempt_count: 1, expected: 0
RCU nest depth: 1, expected: 0
7 locks held by rtcwake/501:
#0: ffff0008038c3408 (sb_writers#5){.+.+}-{0:0}, at: vfs_write+0xf8/0x368
#1: ffff0008049a5e88 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0xbc/0x1c8
#2: ffff00080098d588 (kn->active#70){.+.+}-{0:0}, at: kernfs_fop_write_iter+0xcc/0x1c8
#3: ffff800081c84888 (system_transition_mutex){+.+.}-{4:4}, at: pm_suspend+0x1ec/0x290
#4: ffff0008009ba0f8 (&dev->mutex){....}-{4:4}, at: device_suspend+0x118/0x4f0
#5: ffff800081d00458 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire+0x4/0x48
#6: ffff0008031fb9e0 (&bp->lock){-.-.}-{3:3}, at: macb_suspend+0x144/0x558
irq event stamp: 8682
hardirqs last enabled at (8681): [<ffff8000813c7d7c>] _raw_spin_unlock_irqrestore+0x44/0x88
hardirqs last disabled at (8682): [<ffff8000813c7b58>] _raw_spin_lock_irqsave+0x38/0x98
softirqs last enabled at (7322): [<ffff8000800f1b4c>] handle_softirqs+0x52c/0x588
softirqs last disabled at (7317): [<ffff800080010310>] __do_softirq+0x20/0x2c
CPU: 1 UID: 0 PID: 501 Comm: rtcwake Not tainted 7.0.0-rc3-next-20260310-yocto-standard+ #125 PREEMPT
Hardware name: ZynqMP ZCU102 Rev1.1 (DT)
Call trace:
show_stack+0x24/0x38 (C)
__dump_stack+0x28/0x38
dump_stack_lvl+0x64/0x88
dump_stack+0x18/0x24
__might_resched+0x200/0x218
__might_sleep+0x38/0x98
__mutex_lock_common+0x7c/0x1378
mutex_lock_nested+0x38/0x50
free_irq+0x68/0x2b0
devm_irq_release+0x24/0x38
devres_release+0x40/0x80
devm_free_irq+0x48/0x88
macb_suspend+0x298/0x558
device_suspend+0x218/0x4f0
dpm_suspend+0x244/0x3a0
dpm_suspend_start+0x50/0x78
suspend_devices_and_enter+0xec/0x560
pm_suspend+0x194/0x290
state_store+0x110/0x158
kobj_attr_store+0x1c/0x30
sysfs_kf_write+0xa8/0xd0
kernfs_fop_write_iter+0x11c/0x1c8
vfs_write+0x248/0x368
ksys_write+0x7c/0xf8
__arm64_sys_write+0x28/0x40
invoke_syscall+0x4c/0xe8
el0_svc_common+0x98/0xf0
do_el0_svc+0x28/0x40
el0_svc+0x54/0x1e0
el0t_64_sync_handler+0x84/0x130
el0t_64_sync+0x198/0x1a0
Fixes: 558e35ccfe ("net: macb: WoL support for GEM type of Ethernet controller")
Cc: stable@vger.kernel.org
Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://patch.msgid.link/20260318-macb-irq-v2-1-f1179768ab24@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
core:
- drm_dev_unplug UAF fix
pagemap:
- lock handling fix
xe:
- A number of teardown fixes
- Skip over non-leaf PTE for PRL generation
- Fix an unitialized variable
- Fix a missing runtime PM reference
i915/display:
- Fix#15771: Screen corruption and stuttering on P14s w/ 3K display
- Fix for PSR entry setup frames count on rejected commit
- Fix OOPS if firmware is not loaded and suspend is attempted
- Fix unlikely NULL deref due to DC6 on probe
amdgpu:
- Fix gamma 2.2 colorop TFs
- BO list fix
- LTO fix
- DC FP fix
- DisplayID handling fix
- DCN 2.01 fix
- MMHUB boundary fixes
- ISP fix
- TLB fence fix
- Hainan pm fix
radeon:
- Hainan pm fix
vmwgfx:
- memory leak fix
- doc warning fix
imagination:
- deadlock fix
- interrupt handling fixes
dw-hdmi-qp:
- multi channel audio fix
-----BEGIN PGP SIGNATURE-----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=U8gh
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2026-03-21' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Regular weekly pull request, from sunny San Diego. Usual suspects in
xe/i915/amdgpu with small fixes all over, then some minor fixes across
a few other drivers. It's probably a bit on the heavy side, but most
of the fix seem well contained,
core:
- drm_dev_unplug UAF fix
pagemap:
- lock handling fix
xe:
- A number of teardown fixes
- Skip over non-leaf PTE for PRL generation
- Fix an uninitialized variable
- Fix a missing runtime PM reference
i915/display:
- Fix#15771: Screen corruption and stuttering on P14s w/ 3K display
- Fix for PSR entry setup frames count on rejected commit
- Fix OOPS if firmware is not loaded and suspend is attempted
- Fix unlikely NULL deref due to DC6 on probe
amdgpu:
- Fix gamma 2.2 colorop TFs
- BO list fix
- LTO fix
- DC FP fix
- DisplayID handling fix
- DCN 2.01 fix
- MMHUB boundary fixes
- ISP fix
- TLB fence fix
- Hainan pm fix
radeon:
- Hainan pm fix
vmwgfx:
- memory leak fix
- doc warning fix
imagination:
- deadlock fix
- interrupt handling fixes
dw-hdmi-qp:
- multi channel audio fix"
* tag 'drm-fixes-2026-03-21' of https://gitlab.freedesktop.org/drm/kernel: (40 commits)
drm/xe: Fix missing runtime PM reference in ccs_mode_store
drm/xe: Open-code GGTT MMIO access protection
drm/xe/lrc: Fix uninitialized new_ts when capturing context timestamp
drm/xe/oa: Allow reading after disabling OA stream
drm/xe: Skip over non leaf pte for PRL generation
drm/xe/guc: Ensure CT state transitions via STOP before DISABLED
drm/xe: Trigger queue cleanup if not in wedged mode 2
drm/xe: Forcefully tear down exec queues in GuC submit fini
drm/xe: Always kill exec queues in xe_guc_submit_pause_abort
drm/xe/guc: Fail immediately on GuC load error
drm/i915/gt: Check set_default_submission() before deferencing
drm/radeon: apply state adjust rules to some additional HAINAN vairants
drm/amdgpu: apply state adjust rules to some additional HAINAN vairants
drm/amdgpu: rework how we handle TLB fences
drm/bridge: dw-hdmi-qp: fix multi-channel audio output
drm: Fix use-after-free on framebuffers and property blobs when calling drm_dev_unplug
drm/amdgpu: Fix ISP segfault issue in kernel v7.0
drm/amdgpu/gmc9.0: add bounds checking for cid
drm/amdgpu/mmhub4.2.0: add bounds checking for cid
drm/amdgpu/mmhub4.1.0: add bounds checking for cid
...
The 'gpu' and 'firmware' nodes are not MMIO devices, so they should not be
under a 'simple-bus'. Additionally, the "raspberrypi,bcm2835-power" node
is part of the firmware, so move it under the 'rpi-firmware' node.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20260320154809.1246064-1-robh@kernel.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The BCM63148 has a brcmper I2C block.
The peripheral range needs to be extended to accommodate
it. The Boot LUT is at offset + 0x10000 so extend it to
cover at least that too, 128 KB.
INTERRUPT_ID_I2C is at (ISR_TABLE3_OFFSET + 19) = 96+19 = 115,
convert back to SPI IRQ 115-32 = 83.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20260218-bcmbca-i2c-dts-v2-7-5373ef82c50c@kernel.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The BCM63138 has a brcmper I2C block.
The interrupt is at INTERRUPT_ID_I2C whic is
(ISR_TABLE3_OFFSET + 19) = 96+115, convert back
to SPI interrupt 115-32 = 83.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20260218-bcmbca-i2c-dts-v2-6-5373ef82c50c@kernel.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The BCM6855 has two brcmper I2C blocks, the second one in
the PERF1 area at 0xff85a800, this is covered by the
current bus range.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Link: https://lore.kernel.org/r/20260218-bcmbca-i2c-dts-v2-4-5373ef82c50c@kernel.org
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The WAN MAC is offset by 1. Set in dts to avoid having to handle this in
userspace.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://lore.kernel.org/r/20260225230827.21715-5-rosenp@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The MAC address from the stock firmware is offset by 1. Define it
properly to avoid having to override it in userspace.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://lore.kernel.org/r/20260225230827.21715-3-rosenp@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The MAC address from the stock firmware is offset by 1. Define it
properly to avoid having to override it in userspace.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://lore.kernel.org/r/20260225230827.21715-2-rosenp@gmail.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The valid range for the pulses-per-revolution devicetree property is
1..4. The current code checks for a range of 1..5. Fix it.
Declare the variable used to retrieve pulses per revolution from
devicetree as u32 (unsigned) to match the of_property_read_u32() API.
The current code uses a postfix decrement when writing the pulses per
resolution into the chip. This has no effect since the value is evaluated
before it is decremented. Fix it by decrementing before evaluating the
value.
Fixes: 7506ebcd66 ("hwmon: (max6639) : Configure based on DT property")
Cc: Naresh Solanki <naresh.solanki@9elements.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Document the Renesas RZ/G3L (R9A08G046) RIIC IP. This is compatible with
the version available on Renesas RZ/V2H (R9A09G057).
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Rename the driver disconnect function so that it reflects the callback
name for consistency with the rest of the kernel (e.g. makes it easier
to grep for).
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Add Milos compatible for the CAMSS CCI interfaces.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Based on Thomas Weißschuh's series to kernel headers to no longer require
an installed libc when build testing the uapi headers, the same can now
be done for the scripts/check-uapi.sh script.
The only required change here is to add the usr/dummy-include include
path.
Link: https://lore.kernel.org/lkml/20260227-kbuild-uapi-libc-v1-0-c17de0d19776@weissschuh.net/ [1]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260306163309.2015837-4-arnd@kernel.org
Signed-off-by: Nicolas Schier <nsc@kernel.org>
When ${CROSS_COMPILE} is set, but ${CC} is not set, the logic in
check-uapi.sh is different from the top-level Makefile, which defaults
to using the cross gcc. This leads to using the native gcc instead of the
cross version, resulting in unexpected false-positive and false-negative
output.
Use the same logic here that we use in Kbuild for consistency.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260306163309.2015837-3-arnd@kernel.org
Signed-off-by: Nicolas Schier <nsc@kernel.org>
While testing ABI changes across all architectures, I found that abidiff
sometimes produces nonsensical output. Further debugging identified
missing or broken libelf support for architecture specific relocations
in ET_REL binaries as the source of the problem[1].
Change the script to no longer produce a relocatable object file but
instead create a shared library for each header. This makes abidiff
work for all of the architectures in upstream linux kernels.
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=33869
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20260306163309.2015837-2-arnd@kernel.org
Signed-off-by: Nicolas Schier <nsc@kernel.org>
Currently, the VFIO DSA driver test only supports the SPR DSA device ID.
Attempting to run the test on newer platforms like DMR or GNR-D results
in a "No driver found" error, causing the test to be skipped.
Refactor dsa_probe() to use a switch statement for checking device IDs.
This improves maintainability and makes it easier to add new device IDs
in the future.
Add the following DSA device IDs to the supported list:
PCI_DEVICE_ID_INTEL_DSA_DMR (0x1212)
PCI_DEVICE_ID_INTEL_DSA_GNRD (0x11fb)
Signed-off-by: Yi Lai <yi1.lai@intel.com>
Reviewed-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20260320010930.481380-1-yi1.lai@intel.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
