dcache_clean_poc_nosync does not wait for the data cache clean to
complete. Later, we wait for completion of all scatter-gather entries
together.
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tangquan Zheng <zhengtangquan@oppo.com>
Tested-by: Xueyuan Chen <xueyuan.chen21@gmail.com>
Signed-off-by: Barry Song <baohua@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260228221239.59903-1-21cnbao@gmail.com
dcache_by_myline_op ensures completion of the data cache operations for a
region, while dcache_by_myline_op_nosync only issues them without waiting.
This enables deferred synchronization so completion for multiple regions
can be handled together later.
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Ada Couprie Diaz <ada.coupriediaz@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tangquan Zheng <zhengtangquan@oppo.com>
Tested-by: Xueyuan Chen <xueyuan.chen21@gmail.com>
Signed-off-by: Barry Song <baohua@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260228221216.59886-1-21cnbao@gmail.com
rust:
- Fix safety issue in dma_read! and dma_write!.
nova-core:
- Fix UB in DmaGspMem pointer accessors.
- Fix stack overflow in GSP memory allocation.
loongsoon:
- mark drm driver as unmaintained
msm:
- Core:
- Adjusted msm_iommu_pagetable_prealloc_allocate() allocation type
- DPU:
- Fixed blue screens on Hamoa laptops by reverting the LM reservation
- Fixed the size of the LM block on several platforms
- Dropped usage of %pK (again)
- Fixed smatch warning on SSPP v13+ code
- Fixed INTF_6 interrupts on Lemans
- DSI:
- Fixed DSI PHY revision on Kaanapali
- Fixed pixel clock calculation for the bonded DSI mode panels with
compression enabled
- DT bindings:
- Fixed DisplayPort description on Glymur
- Fixed model name in SM8750 MDSS schema
- GPU:
- Added MODULE_DEVICE_TABLE to the GPU driver
- Fix bogus protect error on X2-85
- Fix dma_free_attrs() buffer size
- Gen8 UBWC fix for Glymur
i915:
- Avoid hang when configuring VRR [icl]
- Fix sg_table overflow with >4GB folios
- Fix PSR Selective Update handling
- Fix eDP ALPM read-out sequence
amdgpu:
- SMU13 fix
- SMU14 fix
- Fixes for bringup hw testing
- Kerneldoc fix
- GC12 idle power fix for compute workloads
- DCCG fixes
amdkfd:
- Fix missing BO unreserve in an error path
ivpu:
- drop unnecessary bootparams register setting
amdxdna:
- fix runtime/suspend resume deadlock
bridge:
- ti-sn65dsi83: fix DSI rounding and dual LVDS
gud:
- fix NULL crtc dereference on display disable
-----BEGIN PGP SIGNATURE-----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=Aqmr
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2026-03-14' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"The weekly drm fixes. This is mostly msm fixes across the functions,
with amdgpu and i915. It also has a core rust fix and changes in
nova-core to take advantage of it, and otherwise just has some minor
driver fixes, and marks loongsoon as orphaned.
rust:
- Fix safety issue in dma_read! and dma_write!
nova-core:
- Fix UB in DmaGspMem pointer accessors
- Fix stack overflow in GSP memory allocation
loongsoon:
- mark drm driver as unmaintained
msm:
- Core:
- Adjusted msm_iommu_pagetable_prealloc_allocate() allocation type
- DPU:
- Fixed blue screens on Hamoa laptops by reverting the LM
reservation
- Fixed the size of the LM block on several platforms
- Dropped usage of %pK (again)
- Fixed smatch warning on SSPP v13+ code
- Fixed INTF_6 interrupts on Lemans
- DSI:
- Fixed DSI PHY revision on Kaanapali
- Fixed pixel clock calculation for the bonded DSI mode panels
with compression enabled
- DT bindings:
- Fixed DisplayPort description on Glymur
- Fixed model name in SM8750 MDSS schema
- GPU:
- Added MODULE_DEVICE_TABLE to the GPU driver
- Fix bogus protect error on X2-85
- Fix dma_free_attrs() buffer size
- Gen8 UBWC fix for Glymur
i915:
- Avoid hang when configuring VRR [icl]
- Fix sg_table overflow with >4GB folios
- Fix PSR Selective Update handling
- Fix eDP ALPM read-out sequence
amdgpu:
- SMU13 fix
- SMU14 fix
- Fixes for bringup hw testing
- Kerneldoc fix
- GC12 idle power fix for compute workloads
- DCCG fixes
amdkfd:
- Fix missing BO unreserve in an error path
ivpu:
- drop unnecessary bootparams register setting
amdxdna:
- fix runtime/suspend resume deadlock
bridge:
- ti-sn65dsi83: fix DSI rounding and dual LVDS
gud:
- fix NULL crtc dereference on display disable"
* tag 'drm-fixes-2026-03-14' of https://gitlab.freedesktop.org/drm/kernel: (44 commits)
drm/amd: Set num IP blocks to 0 if discovery fails
drm/amdkfd: Unreserve bo if queue update failed
drm/amd/display: Check for S0i3 to be done before DCCG init on DCN21
drm/amd/display: Add missing DCCG register entries for DCN20-DCN316
gpu: nova-core: gsp: fix UB in DmaGspMem pointer accessors
drm/loongson: Mark driver as orphaned
accel/amdxdna: Fix runtime suspend deadlock when there is pending job
gpu: nova-core: fix stack overflow in GSP memory allocation
accel/ivpu: Remove boot params address setting via MMIO register
drm/i915/dp: Read ALPM caps after DPCD init
drm/i915/psr: Write DSC parameters on Selective Update in ET mode
drm/i915/dsc: Add helper for writing DSC Selective Update ET parameters
drm/i915/dsc: Add Selective Update register definitions
drm/i915/psr: Repeat Selective Update area alignment
drm/i915: Fix potential overflow of shmem scatterlist length
drm/i915/vrr: Configure VRR timings after enabling TRANS_DDI_FUNC_CTL
drm/bridge: ti-sn65dsi83: halve horizontal syncs for dual LVDS output
drm/bridge: ti-sn65dsi83: fix CHA_DSI_CLK_RANGE rounding
drm/gud: fix NULL crtc dereference on display disable
drm/sitronix/st7586: fix bad pixel data due to byte swap
...
nested_svm_vmrun() currently stores the return value of
nested_svm_copy_vmcb12_to_cache() in a local variable 'err', separate
from the generally used 'ret' variable. This is done to have a single
call to kvm_skip_emulated_instruction(), such that we can store the
return value of kvm_skip_emulated_instruction() in 'ret', and then
re-check the return value of nested_svm_copy_vmcb12_to_cache() in 'err'.
The code is unnecessarily confusing. Instead, call
kvm_skip_emulated_instruction() in the failure path of
nested_svm_copy_vmcb12_to_cache() if the return value is not -EFAULT,
and drop 'err'.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260306210900.1933788-3-yosry@kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
- Improve workqueue stall diagnostics: dump all busy workers (not just
running ones), show wall-clock duration of in-flight work items, and
add a sample module for reproducing stalls.
- Fix POOL_BH vs WQ_BH flag namespace mismatch in pr_cont_worker_id().
- Rename pool->watchdog_ts to pool->last_progress_ts and related
functions for clarity.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCabRyOg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGaAEAP9xJvKzVtyXBMWxIQNJKqN58VaT/5bNk3tYfm3O
ZOuBrQD+Lsxjvv/pSSKFscZJ/x0dthdYncYI8DF3/G6Lnf+LDAc=
=MT3y
-----END PGP SIGNATURE-----
Merge tag 'wq-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue fixes from Tejun Heo:
- Improve workqueue stall diagnostics: dump all busy workers (not just
running ones), show wall-clock duration of in-flight work items, and
add a sample module for reproducing stalls
- Fix POOL_BH vs WQ_BH flag namespace mismatch in pr_cont_worker_id()
- Rename pool->watchdog_ts to pool->last_progress_ts and related
functions for clarity
* tag 'wq-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Rename show_cpu_pool{s,}_hog{s,}() to reflect broadened scope
workqueue: Add stall detector sample module
workqueue: Show all busy workers in stall diagnostics
workqueue: Show in-flight work item duration in stall diagnostics
workqueue: Rename pool->watchdog_ts to pool->last_progress_ts
workqueue: Use POOL_BH instead of WQ_BH when checking pool flags
- Hide PF_EXITING tasks from cgroup.procs to avoid exposing dead tasks
that haven't been removed yet, fixing a systemd timeout issue on
PREEMPT_RT.
- Call rebuild_sched_domains() directly in CPU hotplug instead of
deferring to a workqueue, fixing a race where online/offline CPUs
could briefly appear in stale sched domains.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCabRyLQ4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGXk4APwKw2HtGyI3OQAHfDBL+wlblPtf8acz0zpDwGCT
9+TWFQD/Rhmtvkb/X/LTwT5PKJksoHOfkD4MqmVMGStKGdxtBAY=
=DJ17
-----END PGP SIGNATURE-----
Merge tag 'cgroup-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- Hide PF_EXITING tasks from cgroup.procs to avoid exposing dead tasks
that haven't been removed yet, fixing a systemd timeout issue on
PREEMPT_RT
- Call rebuild_sched_domains() directly in CPU hotplug instead of
deferring to a workqueue, fixing a race where online/offline CPUs
could briefly appear in stale sched domains
* tag 'cgroup-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Don't expose dead tasks in cgroup
cgroup/cpuset: Call rebuild_sched_domains() directly in hotplug
Simplifies allocations by using a flexible array member in this struct.
Add __counted_by to get extra runtime analysis. Move counting variable
assignment immediately after allocation as required by __counted_by.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://patch.msgid.link/20260313215637.6371-1-rosenp@gmail.com
Simplifies allocations by using a flexible array member in this struct.
Add __counted_by to get extra runtime analysis. Move counting variable
assignment to right after allocation as required by __counted_by.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Link: https://patch.msgid.link/20260313215900.6724-1-rosenp@gmail.com
Currently, there are two helpers to match the root compatible value
against an of_device_id array:
- of_machine_device_match() returns true if a match is found,
- of_machine_get_match_data() returns the match data if a match is
found.
However, there is no helper that returns the actual of_device_id
structure corresponding to the match, leading to code duplication in
various drivers.
Fix this by reworking of_machine_device_match() to return the actual
match structure, and renaming it to of_machine_get_match().
Retain the old of_machine_device_match() functionality using a cheap
static inline wrapper around the new of_machine_get_match() helper.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/14e1c03d443b1a5f210609ec3a1ebbaeab8fb3d9.1772468323.git.geert+renesas@glider.be
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
- Fix data races flagged by KCSAN: add missing READ_ONCE()/WRITE_ONCE()
annotations for lock-free accesses to module parameters and dsq->seq.
- Fix silent truncation of upper 32 enqueue flags (SCX_ENQ_PREEMPT and
above) when passed through the int sched_class interface.
- Documentation updates: scheduling class precedence, task ownership
state machine, example scheduler descriptions, config list cleanup.
- Selftest fix for format specifier and buffer length in
file_write_long().
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCabRyHg4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGZiWAQCmUOHiGAk73p9DDn6Zyrm+o/iQm/iOinchBeUs
ZiG0bgEAn15giAnLCA5Zs6cG7PemxBH1v7ctyzTjh1VsBds0rwo=
=zXix
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- Fix data races flagged by KCSAN: add missing READ_ONCE()/WRITE_ONCE()
annotations for lock-free accesses to module parameters and dsq->seq
- Fix silent truncation of upper 32 enqueue flags (SCX_ENQ_PREEMPT and
above) when passed through the int sched_class interface
- Documentation updates: scheduling class precedence, task ownership
state machine, example scheduler descriptions, config list cleanup
- Selftest fix for format specifier and buffer length in
file_write_long()
* tag 'sched_ext-for-7.0-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Use WRITE_ONCE() for the write side of scx_enable helper pointer
sched_ext: Fix enqueue_task_scx() truncation of upper enqueue flags
sched_ext: Documentation: Update sched-ext.rst
sched_ext: Use READ_ONCE() for scx_slice_bypass_us in scx_bypass()
sched_ext: Documentation: Mention scheduling class precedence
sched_ext: Document task ownership state machine
sched_ext: Use READ_ONCE() for lock-free reads of module param variables
sched_ext/selftests: Fix format specifier and buffer length in file_write_long()
sched_ext: Use WRITE_ONCE() for the write side of dsq->seq update
bpf_map__fprintf is unused so delete it, the header file declaring it
and the now unused static helper functions.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
dump_insn and arch_is_uncond_branch are declared in
intel-pt-insn-decoder.c which is unconditionally part of all perf
builds. Don't declare weak versions of these symbols that will be unused.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Function is only used by symsrc__init in symbol-elf.c, make static to
reduce scope. Switch to not passing the argument by value but as a
pointer.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
- Fix stale build ID in module MMAP2 records in events synthesized for
pre-existing processes.
- Fix rust cross compilation.
- hashmap__new() error pointer return handling fixes.
- Fix off-by-one bug in outside of functions check on the disasm code.
- Update header copies of kernel headers, including prctl.h, mount.h, fs.h,
irq_vectors.h, perf_event.h, gfp_types.h, kvm.h, cpufeatures.h msr-index.h,
also the syscall tables files that introduced the 'rseq_slice_yield' syscall.
- Finish removal of ETM_OPT_* on the ARM coresight support, needed to sync
the coresight-pmu.h header with the kernel sources.
- Make in-target rule robust against too long argument error.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCabQnlgAKCRCyPKLppCJ+
J0IWAQCeY+O8/Jn4UsLwYdDqP8merPdD6uqyOocb83CTz1TOVAEA0Szl3dkKDrAt
uZMwyfgBMqxmNtYkzJ5DIZzMGJTT8Qs=
=BE0p
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v7.0-1-2026-03-13' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix stale build ID in module MMAP2 records in events synthesized for
pre-existing processes
- Fix rust cross compilation
- hashmap__new() error pointer return handling fixes
- Fix off-by-one bug in outside of functions check on the disasm code
- Update header copies of kernel headers, including prctl.h, mount.h,
fs.h, irq_vectors.h, perf_event.h, gfp_types.h, kvm.h, cpufeatures.h
msr-index.h, also the syscall tables files that introduced the
'rseq_slice_yield' syscall
- Finish removal of ETM_OPT_* on the ARM coresight support, needed to
sync the coresight-pmu.h header with the kernel sources
- Make in-target rule robust against too long argument error
* tag 'perf-tools-fixes-for-v7.0-1-2026-03-13' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (22 commits)
perf synthetic-events: Fix stale build ID in module MMAP2 records
perf annotate loongarch: Fix off-by-one bug in outside check
perf ftrace: Fix hashmap__new() error checking
perf annotate: Fix hashmap__new() error checking
perf cs-etm: Sync coresight-pmu.h header with the kernel sources
perf cs-etm: Finish removal of ETM_OPT_*
tools headers UAPI: Update tools' copy of linux/coresight-pmu.h
tools headers: Update the syscall tables and unistd.h, to support the new 'rseq_slice_yield' syscall
perf disasm: Fix off-by-one bug in outside check
tools arch x86: Sync msr-index.h to pick MSR_{OMR_[0-3],CORE_PERF_GLOBAL_STATUS_SET}
tools headers UAPI: Sync x86's asm/kvm.h with the kernel sources
tools headers x86 cpufeatures: Sync with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
tools headers: Update the linux/gfp_types.h copy with the kernel sources
perf beauty: Update the linux/perf_event.h copy with the kernel sources
perf beauty: Update the arch/x86/include/asm/irq_vectors.h copy with the kernel sources
perf beauty: Sync UAPI linux/fs.h with kernel sources
perf beauty: Sync linux/mount.h copy with the kernel sources
tools build: Fix rust cross compilation
perf build: Prevent "argument list too long" error
...
- Revert IRQ entry/exit path optimization that incorrectly cleared some
PSW bits before irqentry_exit(), causing boot failures with linux-next
and HRTIMER_REARM_DEFERRED (which only uncovered the problem)
- Fix zcrypt code to show CCA card serial numbers even when the default
crypto domain is offline by selecting any domain available, preventing
empty sysfs entries
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmm0UXkACgkQjYWKoQLX
FBg+fQf/Xm2n+N1GOw1/Xm7Vlw8x9+oaOxVwQUATRnF3Km6HL3DYyNzqTUS6ANcx
oSCkFhZapk8DuQeB/gkMeLiGYMSrh73X0DapoSp4YQdMPwLyRt+0VNDJs2OppZrS
mmlbodxYiQcLcVd0PMkx+YIJ2QbMsqkB2/rQh/icksG2HCIA029p5LowZ7Xcb2q+
zUbP1QbWkmY6ZD2KFpiIvnJnVo0zlJIc0LZAuRS7r470TlSSRrlCuhP7Zdm0P3jQ
Jc33/SQ2NrHO5c+CRbqzql8QdXBMJKAyHhp+lH53G/BuGCynsZbP2+cVev+eXxJw
Xq7j1P4kHh8Wy83d5OvjVk/JTTpSfQ==
=Blff
-----END PGP SIGNATURE-----
Merge tag 's390-7.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Revert IRQ entry/exit path optimization that incorrectly cleared
some PSW bits before irqentry_exit(), causing boot failures with
linux-next and HRTIMER_REARM_DEFERRED (which only uncovered the
problem)
- Fix zcrypt code to show CCA card serial numbers even when the
default crypto domain is offline by selecting any domain available,
preventing empty sysfs entries
* tag 's390-7.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: Enable AUTOSEL_DOM for CCA serialnr sysfs attribute
s390: Revert "s390/irq/idle: Remove psw bits early"
If the entry is NULL the value is meaningless so early return NULL to
avoid an increment of NULL. This was happening in calls from
has_stitched_lbr when running the "perf record LBR tests". The return
value isn't used in that case, so returning NULL as no effect.
Fixes: 42bbabed09 ("perf tools: Add hw_idx in struct branch_stack")
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add myself, Dexuan, and Long as maintainers. Deepak is stepping down
from these responsibilities.
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
In the error path of mshv_map_user_memory(), calling vfree() directly on
the region leaves the MMU notifier registered. When userspace later unmaps
the memory, the notifier fires and accesses the freed region, causing a
use-after-free and potential kernel panic.
Replace vfree() with mshv_partition_put() to properly unregister
the MMU notifier before freeing the region.
Fixes: b9a66cd5cc ("mshv: Add support for movable memory regions")
Signed-off-by: Stanislav Kinsburskii <skinsburskii@linux.microsoft.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmm0YQoTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi1J3B/wMbep9iQcnasEmsj1FIcTCx777ytsk
9QifY6OeWnJ1rmNlFqshkQOYZO/fNced0zS1uRvVusS+bSwjWAGHV44p/PuhHlXN
A7mHf9oN0vh+ET1qgRaPvBdPuIZFLcqffmlzpCLW4fNvCXNqJH+kR237RdPLS557
+g8mMgv2dCa3xBRjIz2QCZaY1ZetMgwpbBSfJHmQ6gLHctc6MQhz42Yr9xb3NCo7
mUDPbuEvyMBgfxzS3HsYDNQ0NIg3RvesTTSzrgYY45ZTl69FCuYf8lGADRap3kvR
wDQqwa9J2UefErw4crR4zHmpZIswrt4jyGbYbQp+GWWNX1IAHZLjVE70
=URMd
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-7.0-rc4' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A small pile of CephFS and messenger bug fixes, all marked for stable"
* tag 'ceph-for-7.0-rc4' of https://github.com/ceph/ceph-client:
libceph: Fix potential out-of-bounds access in ceph_handle_auth_reply()
libceph: Use u32 for non-negative values in ceph_monmap_decode()
MAINTAINERS: update email address of Dongsheng Yang
libceph: reject preamble if control segment is empty
libceph: admit message frames only in CEPH_CON_S_OPEN state
libceph: prevent potential out-of-bounds reads in process_message_header()
ceph: do not skip the first folio of the next object in writeback
ceph: fix memory leaks in ceph_mdsc_build_path()
ceph: add a bunch of missing ceph_path_info initializers
ceph: fix i_nlink underrun during async unlink
Commit adefb2ccea ("drm/v3d: create a dedicated lock for dma fence")
split `fence_lock` from `queue_lock` because v3d_job_update_stats() was
taking `queue_lock` to protect `job->file_priv` during stats collection
in the IRQ handler. Using the same lock for both DMA fence signaling and
stats protection in a IRQ context caused issues on PREEMPT_RT.
Since then, the stats infrastructure has been reworked: v3d_stats is now
refcounted and jobs hold their own references to stats objects, so
v3d_job_update_stats() no longer takes `queue_lock` at all.
With the original reason for the split gone, merge `fence_lock` back
into `queue_lock` to simplify the locking scheme.
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260306-v3d-reset-locking-improv-v3-6-49864fe00692@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
To remove the file_priv NULL-ing dance needed to check if the file
descriptor is open, move the per-fd reset counter into v3d_stats, which
is heap-allocated and refcounted, outliving the fd as long as jobs
reference it.
This change allows the removal of the last `queue_lock` usage to protect
`job->file_priv` and avoids possible NULL ptr dereference issues due to
lifetime mismatches.
Also, to simplify locking, replace both the global and per-fd locked
reset counters with atomics.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260306-v3d-reset-locking-improv-v3-5-49864fe00692@igalia.com
Co-developed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Have each job hold its own references to the per-fd and global stats
objects. This eliminates the need for `queue_lock` protection in the
stats update path, since the job's stats pointers are guaranteed to
remain valid for the job's entire lifetime regardless of file descriptor
closure.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260306-v3d-reset-locking-improv-v3-4-49864fe00692@igalia.com
Co-developed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Convert `v3d_stats` from embedded structs to heap-allocated, refcounted
objects. This decouples the stats lifetime from the containing
structures (this is, `v3d_queue_state` and `v3d_file_priv`), allowing
jobs to safely hold their own references to stats objects even after the
file descriptor is closed.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260306-v3d-reset-locking-improv-v3-3-49864fe00692@igalia.com
Co-developed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
The `v3d_stats` sequence counter uses regular seqcount helpers, which
carry lockdep annotations that expect a consistent IRQ context between
all writers. However, lockdep is unable to detect that v3d's readers
are never in IRQ or softirq context, and that for CPU job queues, even
the write side never is. This led to false positive that were previously
worked around by conditionally disabling local IRQs under
IS_ENABLED(CONFIG_LOCKDEP).
Switch to the raw seqcount helpers which skip lockdep tracking entirely.
This is safe because jobs are fully serialized per queue: the next job
can only be queued after the previous one has been signaled, so there is
no scope for the start and update paths to race on the same seqcount.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260306-v3d-reset-locking-improv-v3-2-49864fe00692@igalia.com
Co-developed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
drm_sched_entity_init() can fail but its return value is currently being
ignored in v3d_open(). Check the return value and properly unwind
on failure by destroying any already-initialized scheduler entities.
Fixes: 57692c94dc ("drm/v3d: Introduce a new DRM driver for Broadcom V3D V3.x+")
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260306-v3d-reset-locking-improv-v3-1-49864fe00692@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
The Digital Video Port (DVP, the 16-bit variant) of the RK3568 VICAP
is broken out to the PF5 mainboard expansion header.
Enable it in the device tree overlay for the WolfVision PF5 IO
Expander board.
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Gerald Loacker <gerald.loacker@wolfvision.net>
Tested-by: Gerald Loacker <gerald.loacker@wolfvision.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Link: https://patch.msgid.link/20260313-wv-io-expander-vicap-v1-1-11001fb3b744@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add a helper to get a pointer to the corresponding VMCB field given an LBR
MSR index, and use it to dedup the handling in svm_{g,s}et_msr().
No functional change intended.
Suggested-by: Yosry Ahmed <yosry@kernel.org>
Reviewed-by: Yosry Ahmed <yosry@kernel.org>
Link: https://patch.msgid.link/20260310220414.2569208-1-seanjc@google.com
[sean: use KVM_BUG_ON() instead of BUILD_BUG(), clang ain't smart enough]
Signed-off-by: Sean Christopherson <seanjc@google.com>
The colorop state blob property handling had memory leaks during state
duplication, destruction, and reset operations. The implementation
failed to follow the established pattern from drm_crtc's handling of
DEGAMMA/GAMMA blob properties.
Issues fixed:
- drm_colorop_atomic_destroy_state() was freeing state memory without
releasing the blob reference, causing a leak
- drm_colorop_reset() was directly freeing old state with kfree()
instead of properly destroying it, leaking blob references
- drm_colorop_cleanup() had duplicate blob cleanup code
Changes:
- Add __drm_atomic_helper_colorop_destroy_state() helper to properly
release blob references before freeing state memory
- Update drm_colorop_atomic_destroy_state() to call the helper
- Fix drm_colorop_reset() to use drm_colorop_atomic_destroy_state()
for proper cleanup of old state
- Simplify drm_colorop_cleanup() to use the common destruction path
This matches the well-tested pattern used by drm_crtc since 2016 and
ensures proper reference counting throughout the state lifecycle.
Co-developed by Claude Sonnet 4.5.
Fixes: cfc27680ee ("drm/colorop: Introduce new drm_colorop mode object")
Cc: Simon Ser <contact@emersion.fr>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Daniel Stone <daniels@collabora.com>
Cc: Melissa Wen <mwen@igalia.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Louis Chauvet <louis.chauvet@bootlin.com>
Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: <stable@vger.kernel.org> #v6.19+
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Link: https://patch.msgid.link/20260312204145.829714-1-harry.wentland@amd.com
schedule_dsq_reenq() always uses schedule_deferred() which falls back to
irq_work. However, callers like schedule_reenq_local() already hold the
target rq lock, and scx_bpf_dsq_reenq() may hold it via the ops callback.
Add a locked_rq parameter so schedule_dsq_reenq() can use
schedule_deferred_locked() when the target rq is already held. The locked
variant can use cheaper paths (balance callbacks, wakeup hooks) instead of
always bouncing through irq_work.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
SCX_ENQ_IMMED makes enqueue to local DSQs succeed only if the task can start
running immediately. Otherwise, the task is re-enqueued through ops.enqueue().
This provides tighter control but requires specifying the flag on every
insertion.
Add SCX_OPS_ALWAYS_ENQ_IMMED ops flag. When set, SCX_ENQ_IMMED is
automatically applied to all local DSQ enqueues including through
scx_bpf_dsq_move_to_local().
scx_qmap is updated with -I option to test the feature and -F option for
IMMED stress testing which forces every Nth enqueue to a busy local DSQ.
v2: - Cover scx_bpf_dsq_move_to_local() path (now has enq_flags via ___v2).
- scx_qmap: Remove sched_switch and cpu_release handlers (superseded by
kernel-side wakeup_preempt_scx()). Add -F for IMMED stress testing.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
scx_bpf_dsq_move_to_local() moves a task from a non-local DSQ to the
current CPU's local DSQ. This is an indirect way of dispatching to a local
DSQ and should support enq_flags like direct dispatches do - e.g.
SCX_ENQ_HEAD for head-of-queue insertion and SCX_ENQ_IMMED for immediate
execution guarantees.
Add scx_bpf_dsq_move_to_local___v2() with an enq_flags parameter. The
original becomes a v1 compat wrapper passing 0. The compat macro is updated
to a three-level chain: v2 (7.1+) -> v1 (current) -> scx_bpf_consume
(pre-rename). All in-tree BPF schedulers are updated to pass 0.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Add enq_flags parameter to consume_dispatch_q() and consume_remote_task(),
passing it through to move_{local,remote}_task_to_local_dsq(). All callers
pass 0.
No functional change. This prepares for SCX_ENQ_IMMED support on the consume
path.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Add SCX_ENQ_IMMED enqueue flag for local DSQ insertions. Once a task is
dispatched with IMMED, it either gets on the CPU immediately and stays on it,
or gets reenqueued back to the BPF scheduler. It will never linger on a local
DSQ behind other tasks or on a CPU taken by a higher-priority class.
rq_is_open() uses rq->next_class to determine whether the rq is available,
and wakeup_preempt_scx() triggers reenqueue when a higher-priority class task
arrives. These capture all higher class preemptions. Combined with reenqueue
points in the dispatch path, all cases where an IMMED task would not execute
immediately are covered.
SCX_TASK_IMMED persists in p->scx.flags until the next fresh enqueue, so the
guarantee survives SAVE/RESTORE cycles. If preempted while running,
put_prev_task_scx() reenqueues through ops.enqueue() with
SCX_TASK_REENQ_PREEMPTED instead of silently placing the task back on the
local DSQ.
This enables tighter scheduling latency control by preventing tasks from
piling up on local DSQs. It also enables opportunistic CPU sharing across
sub-schedulers - without this, a sub-scheduler can stuff the local DSQ of a
shared CPU, making it difficult for others to use.
v2: - Rewrite is_curr_done() as rq_is_open() using rq->next_class and
implement wakeup_preempt_scx() to achieve complete coverage of all
cases where IMMED tasks could get stranded.
- Track IMMED persistently in p->scx.flags and reenqueue
preempted-while-running tasks through ops.enqueue().
- Bound deferred reenq cycles (SCX_REENQ_LOCAL_MAX_REPEAT).
- Misc renames, documentation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Add scx_vet_enq_flags() stub and call it from scx_dsq_insert_preamble() and
scx_dsq_move(). Pass dsq_id into preamble so the vetting function can
validate flag and DSQ combinations.
No functional change. This prepares for SCX_ENQ_IMMED which will populate the
vetting function.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Split task_should_reenq() into local_task_should_reenq() and
user_task_should_reenq(). The local variant takes reenq_flags by pointer.
No functional change. This prepares for SCX_ENQ_IMMED which will add
IMMED-specific logic to the local variant.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Previously tlb invalidations issued by __flush_tlb_page() did not
contain a level hint. From the core API documentation, this function is
clearly only ever intended to target level 3 (PTE) tlb entries:
| 4) ``void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)``
|
| This time we need to remove the PAGE_SIZE sized translation
| from the TLB.
However, the arm64 documentation is more relaxed allowing any last level:
| this operation only invalidates a single, last-level page-table
| entry and therefore does not affect any walk-caches
It turns out that the function was actually being used to invalidate a
level 2 mapping via flush_tlb_fix_spurious_fault_pmd(). The bug was
benign because the level hint was not set so the HW would still
invalidate the PMD mapping, and also because the TLBF_NONOTIFY flag was
set, the bounds of the mapping were never used for anything else.
Now that we have the new and improved range-invalidation API, it is
trival to fix flush_tlb_fix_spurious_fault_pmd() to explicitly flush the
whole range (locally, without notification and last level only). So
let's do that, and then update __flush_tlb_page() to hint level 3.
Reviewed-by: Linu Cherian <linu.cherian@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
[catalin.marinas@arm.com: use "level 3" in the __flush_tlb_page() description]
[catalin.marinas@arm.com: tweak the commit message to include the core API text]
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
By using the same variable for both the return of poll_timeout_us and
the return of the polled function guc_wait_ucode, the return value of
the latter is overwritten and lost after exiting the polling loop. Since
guc_wait_ucode returns -1 on GuC load failure, we lose that information
and always continue as if the GuC had been loaded correctly.
This is fixed by simply using 2 separate variables.
Fixes: a4916b4da4 ("drm/xe/guc: Refactor GuC load to use poll_timeout_us()")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patch.msgid.link/20260303001732.2540493-2-daniele.ceraolospurio@intel.com
Build all dtbs based on SolidRun i.MX8MP SoM with symbols (adding -@ to
dtc flags) to allow applying of device-tree overlays e.g. by the
bootloader.
The SoM has a basler camera connector that can be configured for a
particular camera by device-tree overlay. By extension all boards based
on this SoM have this connector and should support device-tree overlays.
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
imx8mp.dtsi includes a default port@1 node with an empty placeholder
endpoint intended for linking to a dsi bridge or panel.
HummingBoard Pulse mini-hdmi dtsi described a new endpoint node with a
different label attached.
This duplicate label causes confusion and is suspected to also cause
errors during dsi_attach.
Remove the duplicate node and link to the one defined in soc dtsi.
Further remove the unnecessary attach-bridge property.
Fixes: 2a222aa2be ("arm64: dts: add description for solidrun imx8mp hummingboard variants")
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Fix the polarity in vmmc regulator node for the gpio from active-high to
active-low. This is a cosmetic change as regulator default to active-low
unless property enable-active-high was also specified - ignoring the
flag on gpio handle.
Fixes: a009c0c66e ("arm64: dts: add description for solidrun imx8mp som and cubox-m")
Fixes: 2a222aa2be ("arm64: dts: add description for solidrun imx8mp hummingboard variants")
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
IRQ mapping is already present. Add the missing DMA interrupt. This is
similar to commit 0b4c46f9ad ("arm64: dts: imx8qm-ss-hsio: Wire up
DMA IRQ for PCIe")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Add device tree overlay to support the MayQueen PixPaper e-paper display
on the NXP i.MX93 FRDM board. The display is connected via LPSPI3
interface and uses GPIO pins for reset, busy and DC control.
The overlay configures:
- LPSPI3 pinmux for SPI communication (MOSI, MISO, CLK, CE0)
- PixPaper display device with proper GPIO assignments
- SPI frequency set to 1MHz for stable operation
Enable Open-EP Community pixpaper-213-c support on NXP i.MX93.
Signed-off-by: Wig Cheng <onlywig@gmail.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
The MBa8MP-RAS314 mainboard has an integrated PHY connected to the EQOS
ethernet controller which can support up to five queues. Configure
these queues in the same manor as done on the imx8mp-evk.
Setting DMA to threas mode is necessary to prevent FIFO overflows, see
commit 0bc3e333a0 ("arm64: dts: imx8mp-evk: configure multiple queues
on eqos")
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
