All instances of macb_config currently have the .usrio set, but most of
them use &macb_default_usrio. In fact, there is no need to duplicate
this across all macb_config instances. Remove the .usrio setting from
instances that use &macb_default_usrio, and ensure that the default is
selected at runtime when no other value is explicitly set.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://patch.msgid.link/20260310-macb-cleanup-v1-3-928c1a91a7dc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All instances of macb_config currently have the .init field set, but most
of them use macb_init(). In fact, there is no need to duplicate this
across all macb_config instances. Introduce a new macb_init() function
that executes the specific .init if it is set; otherwise, it runs a
default initialization function.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://patch.msgid.link/20260310-macb-cleanup-v1-2-928c1a91a7dc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All instances of macb_config currently have .clk_init set, but most of
them use macb_clk_init(). In fact, there is no need to duplicate this
across all macb_config instances. Introduce a new macb_clk_init()
function that executes the specific .clk_init if it is set; otherwise,
it runs the default clock initialization function.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://patch.msgid.link/20260310-macb-cleanup-v1-1-928c1a91a7dc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests to local_termination.sh to verify that link-local frames
arrive. On some switches the DSA driver uses bridges to connect the
user ports to their CPU ports. More "intelligent" switches typically
don't forward link-local frames, but may trap them to an internal
microcontroller. The driver may have to change trapping rules, so
link-local frames end up on the DSA CPU ports instead of being
silently dropped or trapped to the internal microcontroller of the
switch.
Add two tests which help to validate this has been done correctly:
- Link-local STP BPDU should arrive at the Linux netdev when the
bridge has STP disabled (BR_NO_STP), in which case the bridge
forwards them rather than consuming them in the control plane
- Link-local LLDP should arrive at standalone ports (and the test
should be skipped on bridged ports similar to how it is done
for the IEEE1588v2/PTP tests)
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/1a67081b2ede1e6d2d32f7dd54ae9688f3566152.1773166131.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A user can set conn_timeout to any value via
setsockopt(TIPC_CONN_TIMEOUT), including values less than 4. When a
SYN is rejected with TIPC_ERR_OVERLOAD and the retry path in
tipc_sk_filter_connect() executes:
delay %= (tsk->conn_timeout / 4);
If conn_timeout is in the range [0, 3], the integer division yields 0,
and the modulo operation triggers a divide-by-zero exception, causing a
kernel oops/panic.
Fix this by clamping conn_timeout to a minimum of 4 at the point of use
in tipc_sk_filter_connect().
Oops: divide error: 0000 [#1] SMP KASAN NOPTI
CPU: 0 UID: 0 PID: 119 Comm: poc-F144 Not tainted 7.0.0-rc2+
RIP: 0010:tipc_sk_filter_rcv (net/tipc/socket.c:2236 net/tipc/socket.c:2362)
Call Trace:
tipc_sk_backlog_rcv (include/linux/instrumented.h:82 include/linux/atomic/atomic-instrumented.h:32 include/net/sock.h:2357 net/tipc/socket.c:2406)
__release_sock (include/net/sock.h:1185 net/core/sock.c:3213)
release_sock (net/core/sock.c:3797)
tipc_connect (net/tipc/socket.c:2570)
__sys_connect (include/linux/file.h:62 include/linux/file.h:83 net/socket.c:2098)
Fixes: 6787927475 ("tipc: buffer overflow handling in listener socket")
Cc: stable@vger.kernel.org
Signed-off-by: Mehul Rao <mehulrao@gmail.com>
Reviewed-by: Tung Nguyen <tung.quang.nguyen@est.tech>
Link: https://patch.msgid.link/20260310170730.28841-1-mehulrao@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extend the so_peek_off selftest to ensure the socket peek offset is handled
correctly after both MSG_PEEK and actual data consumption.
Verify that the peek offset advances by the same amount as the number of
bytes read when performing a read with MSG_PEEK.
After exercising SO_PEEK_OFF via MSG_PEEK, drain the receive queue with a
non-peek recv() and verify that it can receive all the content in the
buffer and SO_PEEK_OFF returns back to 0.
The verification after actual data consumption was suggested by Miao Wang
when the original so_peek_off selftest was introduced.
Link: https://lore.kernel.org/all/7B657CC7-B5CA-46D2-8A4B-8AB5FB83C6DA@gmail.com/
Suggested-by: Miao Wang <shankerwangmiao@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Signed-off-by: Soichiro Ueda <the.latticeheart@gmail.com>
Link: https://patch.msgid.link/20260310072832.127848-1-the.latticeheart@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If request_threaded_irq() fails during the PTP message IRQ setup, the
newly created IRQ mapping is never disposed. Indeed, the
ksz_ptp_irq_setup()'s error path only frees the mappings that were
successfully set up.
Dispose the newly created mapping if the associated
request_threaded_irq() fails at setup.
Cc: stable@vger.kernel.org
Fixes: d0b8fec8ae ("net: dsa: microchip: Fix symetry in ksz_ptp_msg_irq_{setup/free}()")
Signed-off-by: Bastien Curutchet (Schneider Electric) <bastien.curutchet@bootlin.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20260309-ksz-ptp-irq-fix-v1-1-757b3b985955@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never
initialized because inet6_init() exits before ndisc_init() is called which
initializes it. If bpf_redirect_neigh() is called with explicit AF_INET6
nexthop parameters, __bpf_redirect_neigh_v6() can skip the IPv6 FIB lookup
and call bpf_out_neigh_v6() directly. bpf_out_neigh_v6() then calls
ip_neigh_gw6(), which uses ipv6_stub->nd_tbl.
BUG: kernel NULL pointer dereference, address: 0000000000000248
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:skb_do_redirect+0x44f/0xf40
Call Trace:
<TASK>
? srso_alias_return_thunk+0x5/0xfbef5
? __tcf_classify.constprop.0+0x83/0x160
? srso_alias_return_thunk+0x5/0xfbef5
? tcf_classify+0x2b/0x50
? srso_alias_return_thunk+0x5/0xfbef5
? tc_run+0xb8/0x120
? srso_alias_return_thunk+0x5/0xfbef5
__dev_queue_xmit+0x6fa/0x1000
? srso_alias_return_thunk+0x5/0xfbef5
packet_sendmsg+0x10da/0x1700
? srso_alias_return_thunk+0x5/0xfbef5
__sys_sendto+0x1f3/0x220
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x101/0xf80
? exc_page_fault+0x6e/0x170
? srso_alias_return_thunk+0x5/0xfbef5
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Fix this by adding an early check in bpf_out_neigh_v6(). If IPv6 is
disabled, drop the packet before neighbor lookup.
Suggested-by: Fernando Fernandez Mancera <fmancera@suse.de>
Fixes: ba452c9e99 ("bpf: Fix bpf_redirect_neigh helper api to support supplying nexthop")
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20260307-net-nd_tbl_fixes-v4-4-e2677e85628c@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never
initialized because inet6_init() exits before ndisc_init() is called which
initializes it. If bpf_redirect_neigh() is called from tc with an explicit
nexthop of nh_family == AF_INET6, bpf_out_neigh_v4() takes the AF_INET6
branch and calls ip_neigh_gw6(), which relies on ipv6_stub->nd_tbl.
BUG: kernel NULL pointer dereference, address: 0000000000000248
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:skb_do_redirect+0xb93/0xf00
Call Trace:
<TASK>
? srso_alias_return_thunk+0x5/0xfbef5
? __tcf_classify.constprop.0+0x83/0x160
? srso_alias_return_thunk+0x5/0xfbef5
? tcf_classify+0x2b/0x50
? srso_alias_return_thunk+0x5/0xfbef5
? tc_run+0xb8/0x120
? srso_alias_return_thunk+0x5/0xfbef5
__dev_queue_xmit+0x6fa/0x1000
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? alloc_skb_with_frags+0x58/0x200
packet_sendmsg+0x10da/0x1700
? srso_alias_return_thunk+0x5/0xfbef5
__sys_sendto+0x1f3/0x220
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x101/0xf80
? exc_page_fault+0x6e/0x170
? srso_alias_return_thunk+0x5/0xfbef5
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Fix this by adding an early check in the AF_INET6 branch of
bpf_out_neigh_v4(). If IPv6 is disabled, unlock RCU and drop the packet.
Suggested-by: Fernando Fernandez Mancera <fmancera@suse.de>
Fixes: ba452c9e99 ("bpf: Fix bpf_redirect_neigh helper api to support supplying nexthop")
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20260307-net-nd_tbl_fixes-v4-3-e2677e85628c@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never
initialized because inet6_init() exits before ndisc_init() is called
which initializes it. If bonding ARP/NS validation is enabled, an IPv6
NS/NA packet received on a slave can reach bond_validate_na(), which
calls bond_has_this_ip6(). That path calls ipv6_chk_addr() and can
crash in __ipv6_chk_addr_and_flags().
BUG: kernel NULL pointer dereference, address: 00000000000005d8
Oops: Oops: 0000 [#1] SMP NOPTI
RIP: 0010:__ipv6_chk_addr_and_flags+0x69/0x170
Call Trace:
<IRQ>
ipv6_chk_addr+0x1f/0x30
bond_validate_na+0x12e/0x1d0 [bonding]
? __pfx_bond_handle_frame+0x10/0x10 [bonding]
bond_rcv_validate+0x1a0/0x450 [bonding]
bond_handle_frame+0x5e/0x290 [bonding]
? srso_alias_return_thunk+0x5/0xfbef5
__netif_receive_skb_core.constprop.0+0x3e8/0xe50
? srso_alias_return_thunk+0x5/0xfbef5
? update_cfs_rq_load_avg+0x1a/0x240
? srso_alias_return_thunk+0x5/0xfbef5
? __enqueue_entity+0x5e/0x240
__netif_receive_skb_one_core+0x39/0xa0
process_backlog+0x9c/0x150
__napi_poll+0x30/0x200
? srso_alias_return_thunk+0x5/0xfbef5
net_rx_action+0x338/0x3b0
handle_softirqs+0xc9/0x2a0
do_softirq+0x42/0x60
</IRQ>
<TASK>
__local_bh_enable_ip+0x62/0x70
__dev_queue_xmit+0x2d3/0x1000
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? packet_parse_headers+0x10a/0x1a0
packet_sendmsg+0x10da/0x1700
? kick_pool+0x5f/0x140
? srso_alias_return_thunk+0x5/0xfbef5
? __queue_work+0x12d/0x4f0
__sys_sendto+0x1f3/0x220
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x101/0xf80
? exc_page_fault+0x6e/0x170
? srso_alias_return_thunk+0x5/0xfbef5
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Fix this by checking ipv6_mod_enabled() before dispatching IPv6 packets to
bond_na_rcv(). If IPv6 is disabled, return early from bond_rcv_validate()
and avoid the path to ipv6_chk_addr().
Suggested-by: Fernando Fernandez Mancera <fmancera@suse.de>
Fixes: 4e24be018e ("bonding: add new parameter ns_targets")
Signed-off-by: Ricardo B. Marlière <rbm@suse.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20260307-net-nd_tbl_fixes-v4-2-e2677e85628c@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
From: Jakub Kicinski <kuba@kernel.org>
Make sure disable_ipv6_mod itself is not part of the IPv6 module,
in case core code wants to refer to it. We will remove support
for IPv6=m soon, this change helps make fixes we commit before
that less messy.
Link: https://patch.msgid.link/20260307-net-nd_tbl_fixes-v4-1-e2677e85628c@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When retrans mount option was introduced, the default value was set
as 1. However, in the light of some bugs that this has exposed recently
we should change it to 0 and retain the old behaviour before this option
was introduced.
Cc: <stable@vger.kernel.org>
Reviewed-by: Bharath SM <bharathsm@microsoft.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When looking up open handles to be re-used in cifs_open(), calling
cifs_get_{writable,readable}_path() is wrong as it will look up for
the first matching open handle, and if @file->f_flags doesn't match,
it will ignore the remaining open handles in
cifsInodeInfo::openFileList that might potentially match
@file->f_flags.
For writable and readable handles, fix this by calling
__cifs_get_writable_file() and __find_readable_file(), respectively,
with FIND_OPEN_FLAGS set.
With the patch, the following program ends up with two opens instead
of three sent over the wire.
```
#define _GNU_SOURCE
#include <unistd.h>
#include <string.h>
#include <fcntl.h>
int main(int argc, char *argv[])
{
int fd;
fd = open("/mnt/1/foo", O_CREAT | O_WRONLY | O_TRUNC, 0664);
close(fd);
fd = open("/mnt/1/foo", O_DIRECT | O_WRONLY);
close(fd);
fd = open("/mnt/1/foo", O_WRONLY);
close(fd);
fd = open("/mnt/1/foo", O_DIRECT | O_WRONLY);
close(fd);
return 0;
}
```
```
$ mount.cifs //srv/share /mnt/1 -o ...
$ gcc test.c && ./a.out
```
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Reviewed-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Cc: David Howells <dhowells@redhat.com>
Cc: linux-cifs@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
parse_server_interfaces() initializes interface socket addresses with
CIFS_PORT. When the mount uses a non-default port this overwrites the
configured destination port.
Later, cifs_chan_update_iface() copies this sockaddr into server->dstaddr,
causing reconnect attempts to use the wrong port after server interface
updates.
Use the existing port from server->dstaddr instead.
Cc: stable@vger.kernel.org
Fixes: fe856be475 ("CIFS: parse and store info on iface queries")
Tested-by: Dr. Thomas Orgis <thomas.orgis@uni-hamburg.de>
Reviewed-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Henrique Carvalho <henrique.carvalho@suse.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Christian Brauner <brauner@kernel.org> says:
Add three new clone3() flags for pidfd-based process lifecycle
management.
=== CLONE_AUTOREAP ===
CLONE_AUTOREAP makes a child process auto-reap on exit without ever
becoming a zombie. This is a per-process property in contrast to the
existing auto-reap mechanism via SA_NOCLDWAIT or SIG_IGN for SIGCHLD
which applies to all children of a given parent.
Currently the only way to automatically reap children is to set
SA_NOCLDWAIT or SIG_IGN on SIGCHLD. This is a parent-scoped property
affecting all children which makes it unsuitable for libraries or
applications that need selective auto-reaping of specific children while
still being able to wait() on others.
CLONE_AUTOREAP stores an autoreap flag in the child's signal_struct.
When the child exits do_notify_parent() checks this flag and causes
exit_notify() to transition the task directly to EXIT_DEAD. Since the
flag lives on the child it survives reparenting: if the original parent
exits and the child is reparented to a subreaper or init the child still
auto-reaps when it eventually exits. This is cleaner than forcing the
subreaper to get SIGCHLD and then reaping it. If the parent doesn't care
the subreaper won't care. If there's a subreaper that would care it
would be easy enough to add a prctl() that either just turns back on
SIGCHLD and turns off auto-reaping or a prctl() that just notifies the
subreaper whenever a child is reparented to it.
CLONE_AUTOREAP can be combined with CLONE_PIDFD to allow the parent to
monitor the child's exit via poll() and retrieve exit status via
PIDFD_GET_INFO. Without CLONE_PIDFD it provides a fire-and-forget
pattern. No exit signal is delivered so exit_signal must be zero.
CLONE_THREAD and CLONE_PARENT are rejected: CLONE_THREAD because
autoreap is a process-level property, and CLONE_PARENT because an
autoreap child reparented via CLONE_PARENT could become an invisible
zombie under a parent that never calls wait().
The flag is not inherited by the autoreap process's own children. Each
child that should be autoreaped must be explicitly created with
CLONE_AUTOREAP.
=== CLONE_NNP ===
CLONE_NNP sets no_new_privs on the child at clone time. Unlike
prctl(PR_SET_NO_NEW_PRIVS) which a process sets on itself, CLONE_NNP
allows the parent to impose no_new_privs on the child at creation
without affecting the parent's own privileges. CLONE_THREAD is rejected
because threads share credentials. CLONE_NNP is useful on its own for
any spawn-and-sandbox pattern but was specifically introduced to enable
unprivileged usage of CLONE_PIDFD_AUTOKILL.
=== CLONE_PIDFD_AUTOKILL ===
This flag ties a child's lifetime to the pidfd returned from clone3().
When the last reference to the struct file created by clone3() is closed
the kernel sends SIGKILL to the child. A pidfd obtained via pidfd_open()
for the same process does not keep the child alive and does not trigger
autokill - only the specific struct file from clone3() has this
property. This is useful for container runtimes, service managers, and
sandboxed subprocess execution - any scenario where the child must die
if the parent crashes or abandons the pidfd or just wants a throwaway
helper process.
CLONE_PIDFD_AUTOKILL requires both CLONE_PIDFD and CLONE_AUTOREAP. It
requires CLONE_PIDFD because the whole point is tying the child's
lifetime to the pidfd. It requires CLONE_AUTOREAP because a killed child
with no one to reap it would become a zombie - the primary use case is
the parent crashing or abandoning the pidfd so no one is around to call
waitpid(). CLONE_THREAD is rejected because autokill targets a process
not a thread.
If CLONE_NNP is specified together with CLONE_PIDFD_AUTOKILL an
unprivileged user may spawn a process that is autokilled. The child
cannot escalate privileges via setuid/setgid exec after being spawned.
If CLONE_PIDFD_AUTOKILL is specified without CLONE_NNP the caller must
have have CAP_SYS_ADMIN in its user namespace.
* patches from https://patch.msgid.link/20260226-work-pidfs-autoreap-v5-0-d148b984a989@kernel.org:
selftests/pidfd: add CLONE_PIDFD_AUTOKILL tests
selftests/pidfd: add CLONE_NNP tests
selftests/pidfd: add CLONE_AUTOREAP tests
pidfd: add CLONE_PIDFD_AUTOKILL
clone: add CLONE_NNP
clone: add CLONE_AUTOREAP
Link: https://patch.msgid.link/20260226-work-pidfs-autoreap-v5-0-d148b984a989@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add tests for CLONE_PIDFD_AUTOKILL:
- autokill_basic: Verify closing the clone3 pidfd kills the child.
- autokill_requires_pidfd: Verify AUTOKILL without CLONE_PIDFD fails.
- autokill_requires_autoreap: Verify AUTOKILL without CLONE_AUTOREAP
fails.
- autokill_rejects_thread: Verify AUTOKILL with CLONE_THREAD fails.
- autokill_pidfd_open_no_effect: Verify only the clone3 pidfd triggers
autokill, not pidfd_open().
- autokill_requires_cap_sys_admin: Verify AUTOKILL without CLONE_NNP
fails with -EPERM for an unprivileged caller.
- autokill_without_nnp_with_cap: Verify AUTOKILL without CLONE_NNP
succeeds with CAP_SYS_ADMIN.
Link: https://patch.msgid.link/20260226-work-pidfs-autoreap-v5-6-d148b984a989@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add tests for the new CLONE_NNP flag:
- nnp_sets_no_new_privs: Verify a child created with CLONE_NNP has
no_new_privs set while the parent does not.
- nnp_rejects_thread: Verify CLONE_NNP | CLONE_THREAD is rejected
with -EINVAL since threads share credentials.
- autoreap_no_new_privs_unset: Verify a plain CLONE_AUTOREAP child
does not get no_new_privs.
Link: https://patch.msgid.link/20260226-work-pidfs-autoreap-v5-5-d148b984a989@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add tests for the new CLONE_AUTOREAP clone3() flag:
- autoreap_without_pidfd: CLONE_AUTOREAP without CLONE_PIDFD works
(fire-and-forget)
- autoreap_rejects_exit_signal: CLONE_AUTOREAP with non-zero
exit_signal fails
- autoreap_rejects_parent: CLONE_AUTOREAP with CLONE_PARENT fails
- autoreap_rejects_thread: CLONE_AUTOREAP with CLONE_THREAD fails
- autoreap_basic: child exits, pidfd poll works, PIDFD_GET_INFO returns
correct exit code, waitpid() returns -ECHILD
- autoreap_signaled: child killed by signal, exit info correct via pidfd
- autoreap_reparent: autoreap grandchild reparented to subreaper still
auto-reaps
- autoreap_multithreaded: autoreap process with sub-threads auto-reaps
after last thread exits
- autoreap_no_inherit: grandchild forked without CLONE_AUTOREAP becomes
a regular zombie
Link: https://patch.msgid.link/20260226-work-pidfs-autoreap-v5-4-d148b984a989@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Replace the global cgroup_file_kn_lock with a per-cgroup_file spinlock
to eliminate cross-cgroup contention as it is not really protecting
data shared between different cgroups.
The lock is initialized in cgroup_add_file() alongside timer_setup().
No lock acquisition is needed during initialization since the cgroup
directory is being populated under cgroup_mutex and no concurrent
accessors exist at that point.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add lockless checks before acquiring cgroup_file_kn_lock:
1. READ_ONCE(cfile->kn) NULL check to skip torn-down files.
2. READ_ONCE(cfile->notified_at) rate-limit check to skip when
within the notification interval. If within the interval, arm
the deferred timer via timer_reduce() and confirm it is pending
before returning -- if the timer fired in between, fall through
to the lock path so the notification is not lost.
Both checks have safe error directions -- a stale read can only
cause unnecessary lock acquisition, never a missed notification.
The critical section is simplified to just taking a kernfs_get()
reference and updating notified_at.
Annotate cfile->kn and cfile->notified_at write sites with
WRITE_ONCE() to pair with the lockless readers.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
cgroup_file_notify() calls kernfs_notify() while holding the global
cgroup_file_kn_lock. kernfs_notify() does non-trivial work including
wake_up_interruptible() and acquisition of a second global spinlock
(kernfs_notify_lock), inflating the hold time.
Take a kernfs_get() reference under the lock and call kernfs_notify()
after dropping it, following the pattern from cgroup_file_show().
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Tejun Heo <tj@kernel.org>
Add a new clone3() flag CLONE_PIDFD_AUTOKILL that ties a child's
lifetime to the pidfd returned from clone3(). When the last reference to
the struct file created by clone3() is closed the kernel sends SIGKILL
to the child. A pidfd obtained via pidfd_open() for the same process
does not keep the child alive and does not trigger autokill - only the
specific struct file from clone3() has this property.
This is useful for container runtimes, service managers, and sandboxed
subprocess execution - any scenario where the child must die if the
parent crashes or abandons the pidfd.
CLONE_PIDFD_AUTOKILL requires both CLONE_PIDFD (the whole point is tying
lifetime to the pidfd file) and CLONE_AUTOREAP (a killed child with no
one to reap it would become a zombie). CLONE_THREAD is rejected because
autokill targets a process not a thread.
The clone3 pidfd is identified by the PIDFD_AUTOKILL file flag set on
the struct file at clone3() time. The pidfs .release handler checks this
flag and sends SIGKILL via do_send_sig_info(SIGKILL, SEND_SIG_PRIV, ...)
only when it is set. Files from pidfd_open() or open_by_handle_at() are
distinct struct files that do not carry this flag. dup()/fork() share the
same struct file so they extend the child's lifetime until the last
reference drops.
CLONE_PIDFD_AUTOKILL uses a privilege model based on CLONE_NNP: without
CLONE_NNP the child could escalate privileges via setuid/setgid exec
after being spawned, so the caller must have CAP_SYS_ADMIN in its user
namespace. With CLONE_NNP the child can never gain new privileges so
unprivileged usage is allowed. This is a deliberate departure from the
pdeath_signal model which is reset during secureexec and commit_creds()
rendering it useless for container runtimes that need to deprivilege
themselves.
Link: https://patch.msgid.link/20260226-work-pidfs-autoreap-v5-3-d148b984a989@kernel.org
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a new clone3() flag CLONE_NNP that sets no_new_privs on the child
process at clone time. This is analogous to prctl(PR_SET_NO_NEW_PRIVS)
but applied at process creation rather than requiring a separate step
after the child starts running.
CLONE_NNP is rejected with CLONE_THREAD. It's conceptually a lot simpler
if the whole thread-group is forced into NNP and not have single threads
running around with NNP.
Link: https://patch.msgid.link/20260226-work-pidfs-autoreap-v5-2-d148b984a989@kernel.org
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a new clone3() flag CLONE_AUTOREAP that makes a child process
auto-reap on exit without ever becoming a zombie. This is a per-process
property in contrast to the existing auto-reap mechanism via
SA_NOCLDWAIT or SIG_IGN for SIGCHLD which applies to all children of a
given parent.
Currently the only way to automatically reap children is to set
SA_NOCLDWAIT or SIG_IGN on SIGCHLD. This is a parent-scoped property
affecting all children which makes it unsuitable for libraries or
applications that need selective auto-reaping of specific children while
still being able to wait() on others.
CLONE_AUTOREAP stores an autoreap flag in the child's signal_struct.
When the child exits do_notify_parent() checks this flag and causes
exit_notify() to transition the task directly to EXIT_DEAD. Since the
flag lives on the child it survives reparenting: if the original parent
exits and the child is reparented to a subreaper or init the child still
auto-reaps when it eventually exits.
CLONE_AUTOREAP can be combined with CLONE_PIDFD to allow the parent to
monitor the child's exit via poll() and retrieve exit status via
PIDFD_GET_INFO. Without CLONE_PIDFD it provides a fire-and-forget
pattern where the parent simply doesn't care about the child's exit
status. No exit signal is delivered so exit_signal must be zero.
CLONE_AUTOREAP is rejected in combination with CLONE_PARENT. If a
CLONE_AUTOREAP child were to clone(CLONE_PARENT) the new grandchild
would inherit exit_signal == 0 from the autoreap parent's group leader
but without signal->autoreap. This grandchild would become a zombie that
never sends a signal and is never autoreaped - confusing and arguably
broken behavior.
The flag is not inherited by the autoreap process's own children. Each
child that should be autoreaped must be explicitly created with
CLONE_AUTOREAP.
Link: https://github.com/uapi-group/kernel-features/issues/45
Link: https://patch.msgid.link/20260226-work-pidfs-autoreap-v5-1-d148b984a989@kernel.org
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The DesignWare I3C master controller ACKs IBIs as soon as a valid
Device Address Table (DAT) entry is present. This can create a race
between device attachment (after DAA) and the point where the client
driver enables IBIs via i3c_device_enable_ibi().
Set DEV_ADDR_TABLE_SIR_REJECT in the DAT entry during
attach_i3c_dev() and reattach_i3c_dev() so that IBIs are rejected
by default. The bit is managed thereafter by the existing
dw_i3c_master_set_sir_enabled() function, which clears it in
enable_ibi() after ENEC is issued, and restores it in disable_ibi()
after DISEC.
Fixes: 1dd728f5d4 ("i3c: master: Add driver for Synopsys DesignWare IP")
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/53f5b8cbdd8af789ec38b95b02873f32f9182dd6.1770962368.git.adrianhoyin.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The DesignWare I3C master driver creates a virtual I2C adapter to
provide backward compatibility with I2C devices. However, the current
implementation does not associate this virtual adapter with any
Device Tree node.
Propagate the of_node from the I3C master platform device to the
virtual I2C adapter's device structure. This ensures that standard
I2C aliases are correctly resolved and bus numbering remains consistent.
Signed-off-by: Peter Yin <peteryin.openbmc@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260302075645.1492766-1-peteryin.openbmc@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Explain these atomic flags to improve code readability. For example, the
flag IMA_DIGSIG is to indicate we mustn't update a file's security.ima
on close because the file already has IMA signature. The code comments
for the first three flags come from commit 0d73a55208 ("ima:
re-introduce own integrity cache lock") with a minor tweak.
Signed-off-by: Coiby Xu <coxu@redhat.com>
[zohar@linux.ibm.com: remove duplicate "integrity violation", unnecessary commas]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
These casts assume that the struct attribute is at the beginning of struct
edac_dev_sysfs_block_attribute. This is can silently break if the field is
moved, either manually or through struct randomization.
Use proper member syntax to get the field address and drop the casts.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260223-sysfs-const-edac-v1-3-3ff0b87249e7@weissschuh.net
Disruption of the MIPI I3C HCI controller's internal state can cause
i3c_hci_bus_disable() to fail when attempting to shut down the bus.
In the code paths where bus disable is invoked - bus clean-up and runtime
suspend - the controller does not need to remain operational afterward, so
a full controller reset is a safe recovery mechanism.
Add a fallback to issue a software reset when disabling the bus fails.
This ensures the bus is reliably halted even if the controller's state
machine is stuck or unresponsive.
The fallback is used both during bus clean-up and in the runtime suspend
path. In the latter case, ensure interrupts are quiesced after reset.
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-15-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Shared interrupts may fire unexpectedly, including during periods when the
controller is not yet fully initialized. Commit b9a15012a1
("i3c: mipi-i3c-hci: Add optional Runtime PM support") addressed this issue
for the runtime-suspended state, but the same problem can also occur before
the bus is enabled for the first time.
Ensure the IRQ handler ignores interrupts until initialization is complete
by making consistent use of the existing irq_inactive flag. The flag is
now set to false immediately before enabling the bus.
To guarantee correct ordering with respect to the IRQ handler, protect
all transitions of irq_inactive with the same spinlock used inside the
handler.
Fixes: b8460480f6 ("i3c: mipi-i3c-hci: Allow for Multi-Bus Instances")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-14-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The DMA ring halts whenever a transfer encounters an error. The interrupt
handler previously attempted to detect this situation and restart the ring
if a transfer completed at the same time. However, this restart logic runs
entirely in interrupt context and is inherently racy: it interacts with
other paths manipulating the ring state, and fully serializing it within
the interrupt handler is not practical.
Move this error-recovery logic out of the interrupt handler and into the
transfer-processing path (i3c_hci_process_xfer()), where serialization and
state management are already controlled. Introduce a new optional I/O-ops
callback, handle_error(), invoked when a completed transfer reports an
error. For DMA operation, the implementation simply calls the existing
dequeue function, which safely aborts and restarts the ring when needed.
This removes the fragile ring-restart logic from the interrupt handler and
centralizes error handling where proper sequencing can be ensured.
Fixes: ccdb2e0e3b ("i3c: mipi-i3c-hci: Add Intel specific quirk to ring resuming")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-13-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Several parts of the MIPI I3C HCI driver duplicate the same sequence for
queuing a transfer, waiting for completion, and handling timeouts. This
logic appears in five separate locations and will be affected by an
upcoming fix.
Refactor the repeated code into a new helper, i3c_hci_process_xfer(), and
store the timeout value in the hci_xfer structure so that callers do not
need to pass it as a separate parameter.
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-12-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The DMA dequeue path attempts to restart the ring after aborting an
in-flight transfer, but the current sequence is incomplete. The controller
must be brought out of the aborted state and the ring control registers
must be programmed in the correct order: first clearing ABORT, then
re-enabling the ring and asserting RUN_STOP to resume operation.
Add the missing controller resume step and update the ring control writes
so that the ring is restarted using the proper sequence.
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-11-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The internal control command descriptor used for no-op commands includes a
Transaction ID (TID) field, but the no-op command constructed in
hci_dma_dequeue_xfer() omitted it. As a result, the hardware receives a
no-op descriptor without the expected TID.
This bug has gone unnoticed because the TID is currently not validated in
the no-op completion path, but the descriptor format requires it to be
present.
Add the missing TID field when generating a no-op descriptor so that its
layout matches the defined command structure.
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-10-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The logic used to abort the DMA ring contains several flaws:
1. The driver unconditionally issues a ring abort even when the ring has
already stopped.
2. The completion used to wait for abort completion is never
re-initialized, resulting in incorrect wait behavior.
3. The abort sequence unintentionally clears RING_CTRL_ENABLE, which
resets hardware ring pointers and disrupts the controller state.
4. If the ring is already stopped, the abort operation should be
considered successful without attempting further action.
Fix the abort handling by checking whether the ring is running before
issuing an abort, re-initializing the completion when needed, ensuring that
RING_CTRL_ENABLE remains asserted during abort, and treating an already
stopped ring as a successful condition.
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-9-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The DMA ring bookkeeping in the MIPI I3C HCI driver is updated from two
contexts: the DMA ring dequeue path (hci_dma_dequeue_xfer()) and the
interrupt handler (hci_dma_xfer_done()). Both modify the ring's
in-flight transfer state - specifically rh->src_xfers[] and
xfer->ring_entry - but without any serialization. This allows the two
paths to race, potentially leading to inconsistent ring state.
Serialize access to the shared ring state by extending the existing
spinlock to cover the DMA dequeue path and the entire interrupt handler.
Since the core IRQ handler now holds this lock, remove the per-function
locking from the PIO and DMA sub-handlers.
Additionally, clear the completed entry in rh->src_xfers[] in
hci_dma_xfer_done() so it cannot be matched or completed again.
Finally, place the ring restart sequence under the same lock in
hci_dma_dequeue_xfer() to avoid concurrent enqueue or completion
operations while the ring state is being modified.
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-8-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The HCI DMA dequeue path (hci_dma_dequeue_xfer()) may be invoked for
multiple transfers that timeout around the same time. However, the
function is not serialized and can race with itself.
When a timeout occurs, hci_dma_dequeue_xfer() stops the ring, processes
incomplete transfers, and then restarts the ring. If another timeout
triggers a parallel call into the same function, the two instances may
interfere with each other - stopping or restarting the ring at unexpected
times.
Add a mutex so that hci_dma_dequeue_xfer() is serialized with respect to
itself.
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-7-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The I3C subsystem allows multiple transfers to be queued concurrently.
However, the MIPI I3C HCI driver's DMA enqueue path, hci_dma_queue_xfer(),
lacks sufficient serialization.
In particular, the allocation of the enqueue_ptr and its subsequent update
in the RING_OPERATION1 register, must be done atomically. Otherwise, for
example, it would be possible for 2 transfers to be allocated the same
enqueue_ptr.
Extend the use of the existing spinlock for that purpose. Keep a count of
the number of xfers enqueued so that it is easy to determine if the ring
has enough space.
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-6-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The MIPI I3C HCI driver currently uses separate spinlocks for different
contexts (PIO vs. DMA rings). This split is unnecessary and complicates
upcoming fixes. The driver does not support concurrent PIO and DMA
operation, and it only supports a single DMA ring, so a single lock is
sufficient for all paths.
Introduce a unified spinlock in struct i3c_hci, switch both PIO and DMA
code to use it, and remove the per-context locks.
No functional change is intended in this patch.
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-5-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Prepare for fixing a race in the DMA ring enqueue path when handling
parallel transfers. Move all DMA mapping out of hci_dma_queue_xfer()
and into a new helper that performs the mapping up front.
This refactoring allows the upcoming fix to extend the spinlock coverage
around the enqueue operation without performing DMA mapping under the
spinlock.
No functional change is intended in this patch.
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-4-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The MIPI I3C HCI host controller driver does not implement Hot-Join
handling, yet Hot-Join response control defaults to allowing devices to
Hot-Join the bus. Configure HC_CONTROL_HOT_JOIN_CTRL to NACK all Hot-Join
attempts.
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-3-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The MIPI I3C HCI driver currently returns -ETIME for various timeout
conditions, while other I3C master drivers consistently use -ETIMEDOUT
for the same class of errors. Align the HCI driver with the rest of the
subsystem by replacing all uses of -ETIME with -ETIMEDOUT.
Fixes: 9ad9a52cce ("i3c/master: introduce the mipi-i3c-hci driver")
Cc: stable@vger.kernel.org
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306072451.11131-2-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
