hv_crash_c_entry() is a C function that is entered without a stack,
and this is only allowed for functions that have the __naked attribute,
which informs the compiler that it must not emit the usual prologue and
epilogue or emit any other kind of instrumentation that relies on a
stack frame.
So split up the function, and set the __naked attribute on the initial
part that sets up the stack, GDT, IDT and other pieces that are needed
for ordinary C execution. Given that function calls are not permitted
either, use the existing long return coded in an asm() block to call the
second part of the function, which is an ordinary function that is
permitted to call other functions as usual.
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> # asm parts, not hv parts
Reviewed-by: Mukesh Rathor <mrathor@linux.microsoft.com>
Acked-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: linux-hyperv@vger.kernel.org
Fixes: 94212d3461 ("x86/hyperv: Implement hypervisor RAM collection into vmcore")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
This reverts commit 36d6cbb621.
Calling this as a passthrough hypercall leaves the VM in an inconsistent
state. Revert before it is released.
Signed-off-by: Wei Liu <wei.liu@kernel.org>
livepatch_trampoline relies on livepatch sysfs and livepatch-sample.ko.
When CONFIG_LIVEPATCH is disabled or the samples module isn't built, the
test fails with ENOENT and causes false failures in minimal CI configs.
Skip the test when livepatch sysfs or the sample module is unavailable.
Also avoid writing to livepatch sysfs when it's not present.
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20260309104448.817401-1-sun.jian.kdev@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Patch 1/2 added PID filtering to the probe_user BPF program to avoid
cross-test interference from the global connect() hooks.
With the interference removed, drop the serial_ prefix and remove the
stale TODO comment so the test can run in parallel.
Tested:
./test_progs -t probe_user -v
./test_progs -j$(nproc) -t probe_user
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260306083330.518627-2-sun.jian.kdev@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test installs a kprobe on __sys_connect and checks that
bpf_probe_write_user() can modify the syscall argument. However, any
concurrent thread in any other test that calls connect() will also
trigger the kprobe and have its sockaddr silently overwritten, causing
flaky failures in unrelated tests.
Constrain the hook to the current test process by filtering on a PID
stored as a global variable in .bss. Initialize the .bss value from
user space before bpf_object__load() using bpf_map__set_initial_value(),
and validate the bss map value size to catch layout mismatches.
No new map is introduced and the test keeps the existing non-skeleton
flow.
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260306083330.518627-1-sun.jian.kdev@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Correct the early return from the i.MX remoteproc prepare operation,
which prevented the platform-specific prepare function to be reached.
Ensure that the Mediatek SCP clock is released during system suspend,
after the recent refactoring to avoid issues with the clock framework's
prepare lock.
Correct the type of the subsys_name_len field in the sysmon event
QMI message, as the recent introduction of big endian support in the QMI
encoder highlighted the type mismatch and resulted in a failure to
encode the message.
Roll back the devm_ioremap_resource_wc() to a devm_ioremap_wc() in the
Qualcomm WCNSS remoteproc driver, after reports that requesting this
resource fails on some platforms.
-----BEGIN PGP SIGNATURE-----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=7ekE
-----END PGP SIGNATURE-----
Merge tag 'rproc-v7.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc fixes from Bjorn Andersson:
- Correct the early return from the i.MX remoteproc prepare
operation, which prevented the platform-specific prepare
function from being reached
- Ensure that the Mediatek SCP clock is released during system
suspend after the recent refactoring to avoid issues with the
clock framework's prepare lock.
- Correct the type of the subsys_name_len field in the sysmon
event QMI message, as the recent introduction of big endian
support in the QMI encoder highlighted the type mismatch and
resulted in a failure to encode the message
- Roll back the devm_ioremap_resource_wc() to a devm_ioremap_wc()
in the Qualcomm WCNSS remoteproc driver, after reports that
requesting this resource fails on some platforms
* tag 'rproc-v7.0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: imx_rproc: Fix unreachable platform prepare_ops
remoteproc: mediatek: Unprepare SCP clock during system suspend
remoteproc: sysmon: Correct subsys_name_len type in QMI request
remoteproc: qcom_wcnss: Fix reserved region mapping failure
The module_attach test contains subtests which check that unloading a
module while there are BPF programs attached to its functions is not
possible because the module is still referenced.
The problem is that the test calls the generic unload_module() helper
function which is used for module cleanup after test_progs terminate and
tries to wait until all module references are released. This
unnecessarily slows down the module_attach subtests since each
unsuccessful call to unload_module() takes about 1 second.
Introduce try_unload_module() which takes the number of retries as a
parameter. Make unload_module() call it with the currently used amount
of 10000 retries but call it with just 1 retry from module_attach tests
as it is always expected to fail. This speeds up the module_attach()
test significantly.
Before:
# time ./test_progs -t module_attach
[...]
Summary: 1/14 PASSED, 0 SKIPPED, 0 FAILED
real 0m5.011s
user 0m0.293s
sys 0m0.108s
After:
# time ./test_progs -t module_attach
[...]
Summary: 1/14 PASSED, 0 SKIPPED, 0 FAILED
real 0m0.350s
user 0m0.197s
sys 0m0.063s
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Tested-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20260306101628.3822284-1-vmalik@redhat.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Report the ability to support SoundWire clock-stop mode 1 if this is
enabled in ACPI. Mode 1 allows the device to lose state, so it can
reduce power consumption in clock-stop. Also add the necessary
handling to wait for re-enumeration on resume.
This does not use sdw_slave_read_prop(), because that also fills in
other properties from ACPI that were not previously set by the driver
and this has been observed to break some systems. Instead, the
"mipi-sdw-clock-stop-mode1-supported" property is checked directly.
When a SoundWire peripheral has been put into clock-stop mode 1 it
must be re-enumerated after the clock is restarted. A new flag
sdw_in_clock_stop_1 is set to true in cs35l56_sdw_clk_stop() if the
SoundWire core notifies that it is entering clock-stop 1.
cs35l56_sdw_handle_unattach() will wait for re-enumeration if
sdw_in_clock_stop_1 is true.
sdw_in_clock_stop_1 will be reset to false when an ATTACH notification
is received in cs35l56_sdw_update_status().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260311142153.2201761-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The filesystem UUID was only being loaded into super_block sb when an
external journal device was in use. When mounting without an external
journal, the UUID remained unset, which prevented the computation of
a filesystem ID (fsid), which could be confirmed via `stat -f -c "%i"`
and thus user space could not use fanotify correctly.
A missing filesystem ID causes fanotify to return ENODEV when marking
the filesystem for events like FAN_CREATE, FAN_DELETE, FAN_MOVED_TO,
and FAN_MOVED_FROM. As a result, applications relying on fanotify
could not monitor these events on JFS filesystems without an external
journal.
Moved the UUID initialization so it is always performed during mount,
ensuring the superblock UUID is consistently available.
Signed-off-by: João Paredes <joaommp@yahoo.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
In lbmRead(), the I/O event waited for by wait_event() finishes before
it goes to sleep, and the lbmIODone() prematurely sets the flag to
lbmDONE, thus ending the wait. This causes wait_event() to return before
lbmREAD is cleared (because lbmDONE was set first), the premature return
of wait_event() leads to the release of lbuf before lbmIODone() returns,
thus triggering the use-after-free vulnerability reported in [1].
Moving the operation of setting the lbmDONE flag to after clearing lbmREAD
in lbmIODone() avoids the use-after-free vulnerability reported in [1].
[1]
BUG: KASAN: slab-use-after-free in rt_spin_lock+0x88/0x3e0 kernel/locking/spinlock_rt.c:56
Call Trace:
blk_update_request+0x57e/0xe60 block/blk-mq.c:1007
blk_mq_end_request+0x3e/0x70 block/blk-mq.c:1169
blk_complete_reqs block/blk-mq.c:1244 [inline]
blk_done_softirq+0x10a/0x160 block/blk-mq.c:1249
Allocated by task 6101:
lbmLogInit fs/jfs/jfs_logmgr.c:1821 [inline]
lmLogInit+0x3d0/0x19e0 fs/jfs/jfs_logmgr.c:1269
open_inline_log fs/jfs/jfs_logmgr.c:1175 [inline]
lmLogOpen+0x4e1/0xfa0 fs/jfs/jfs_logmgr.c:1069
jfs_mount_rw+0xe9/0x670 fs/jfs/jfs_mount.c:257
jfs_fill_super+0x754/0xd80 fs/jfs/super.c:532
Freed by task 6101:
kfree+0x1bd/0x900 mm/slub.c:6876
lbmLogShutdown fs/jfs/jfs_logmgr.c:1864 [inline]
lmLogInit+0x1137/0x19e0 fs/jfs/jfs_logmgr.c:1415
open_inline_log fs/jfs/jfs_logmgr.c:1175 [inline]
lmLogOpen+0x4e1/0xfa0 fs/jfs/jfs_logmgr.c:1069
jfs_mount_rw+0xe9/0x670 fs/jfs/jfs_mount.c:257
jfs_fill_super+0x754/0xd80 fs/jfs/super.c:532
Reported-by: syzbot+1d38eedcb25a3b5686a7@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=1d38eedcb25a3b5686a7
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Add check_dtpage() to validate dtpage_t integrity, focusing on
preventing index/pointer overflows from on-disk corruption.
Key checks:
- maxslot must be exactly DTPAGEMAXSLOT (128) as defined for dtpage
slot array.
- freecnt bounded by [0, DTPAGEMAXSLOT-1] (slot[0] reserved for header).
- freelist validity: -1 when freecnt=0; 1~DTPAGEMAXSLOT-1 when non-zero,
with linked list checks (no duplicates, proper termination via next=-1).
- stblindex bounds: must be within range that avoids overlapping with
stbl itself (stblindex < DTPAGEMAXSLOT - stblsize).
- nextindex bounded by stbl size (stblsize << L2DTSLOTSIZE). stbl entries
validity: within 1~DTPAGEMAXSLOT-1, no duplicates(excluding invalid
entries marked as -1).
Invoked when loading dtpage (in BT_GETPAGE macro context) to catch
corruption early before directory operations trigger out-of-bounds access.
Signed-off-by: Yun Zhou <yun.zhou@windriver.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
The nand-controller.yaml binding requires a child node (e.g. nand@0) under
the NAND controller. However, the driver currently assigns the controller's
of_node directly to the NAND chip.
Search for the first child node with the "nand" prefix and assign it to
chip->of_node. This filters out properties such as "partition" that may be
placed under the controller node in some older DTS files.
Fall back to using the controller's of_node if no suitable child node is
found to maintain backward compatibility.
This issue went unnoticed because the default behavior works for most NAND
chips.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The nand-controller.yaml binding requires a child node (e.g. nand@0) under
the NAND controller. However, the driver currently assigns the controller's
of_node directly to the NAND chip.
Search for the first child node with the "nand" prefix and assign it to
chip->of_node. This filters out properties such as "partition" that may be
placed under the controller node in some older DTS files.
Fall back to using the controller's of_node if no suitable child node is
found to maintain backward compatibility.
This issue went unnoticed because the default behavior works for most NAND
chips.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The nand-controller.yaml binding requires a child node (e.g. nand@0) under
the NAND controller. However, the driver currently assigns the controller's
of_node directly to the NAND chip.
Search for the first child node with the "nand" prefix and assign it to
chip->of_node. This filters out properties such as "partition" that may be
placed under the controller node in some older DTS files.
Fall back to using the controller's of_node if no suitable child node is
found to maintain backward compatibility.
This issue went unnoticed because the default behavior works for most NAND
chips.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Refactor nand_resume() to use scoped_guard() instead of explicit
mutex_lock/unlock. This improves code safety by ensuring the mutex
is always released through the RAII-based cleanup infrastructure.
The behavior is functionally equivalent. The mutex is released at the
end of the scoped block, after which wake_up_all() is called to
preserve the original locking semantics.
Signed-off-by: Richard Lyu <richard.lyu@suse.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
When oops_panic_write is set, the driver disables interrupts and
switches to PIO polling mode but still falls through into the DMA
path. DMA cannot be used reliably in panic context, so make the
DMA path an else branch to ensure only PIO is used during panic
writes.
Fixes: c1ac2dc34b ("mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling")
Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
nand_lock() and nand_unlock() call into chip->ops.lock_area/unlock_area
without holding the NAND device lock. On controllers that implement
SET_FEATURES via multiple low-level PIO commands, these can race with
concurrent UBI/UBIFS background erase/write operations that hold the
device lock, resulting in cmd_pending conflicts on the NAND controller.
Add nand_get_device()/nand_release_device() around the lock/unlock
operations to serialize them against all other NAND controller access.
Fixes: 92270086b7 ("mtd: rawnand: Add support for manufacturer specific lock/unlock operation")
Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Some bootloaders like recent versions of U-Boot may install some DMI
properties with empty values rather than not populate them. This manages
to make its way through the validator and cleanup resulting in a rogue
hyphen being appended to the card longname.
Fixes: 4e01e5dbba ("ASoC: improve the DMI long card code in asoc-core")
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Link: https://patch.msgid.link/20260306174707.283071-2-casey.connolly@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Example is wrong, the reg property of the flash is always matching the
node name.
Fixes: 68cd8ef484 ("dt-bindings: mtd: st,spear600-smi: convert to DT schema")
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
These properties must be set because they overwrite the default values,
especially #size-cells which is 0 for most controllers and is 'const: 1'
here.
Fixes: 68cd8ef484 ("dt-bindings: mtd: st,spear600-smi: convert to DT schema")
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The description mixes two nodes. There is the controller, and there is
the flash. Describe the flash (which itself can be considered an mtd
device, unlike the top level controller), and move the st,smi-fast-mode
property inside, as this property is flash specific and should not live
in the parent controller node.
Fixes: 68cd8ef484 ("dt-bindings: mtd: st,spear600-smi: convert to DT schema")
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Enable the Qualcomm WCD937x headphone audio codec as a loadable module,
as it is now required on the QCM6490 IDP platform.
Signed-off-by: Ajay Kumar Nandam <ajay.nandam@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260121102606.1753970-1-ajay.nandam@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The DmaGspMem pointer accessor methods (gsp_write_ptr, gsp_read_ptr,
cpu_read_ptr, cpu_write_ptr, advance_cpu_read_ptr,
advance_cpu_write_ptr) dereference a raw pointer to DMA memory, creating
an intermediate reference before calling volatile read/write methods.
This is undefined behavior since DMA memory can be concurrently modified
by the device.
Fix this by moving the implementations into a gsp_mem module in fw.rs
that uses the dma_read!() / dma_write!() macros, making the original
methods on DmaGspMem thin forwarding wrappers.
An alternative approach would have been to wrap the shared memory in
Opaque, but that would have required even more unsafe code.
Since the gsp_mem module lives in fw.rs (to access firmware-specific
binding field names), GspMem, Msgq and their relevant fields are
temporarily widened to pub(super). This will be reverted once IoView
projections are available.
Cc: Gary Guo <gary@garyguo.net>
Closes: https://lore.kernel.org/nouveau/DGUT14ILG35P.1UMNRKU93JUM1@kernel.org/
Fixes: 75f6b1de81 ("gpu: nova-core: gsp: Add GSP command queue bindings and handling")
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Link: https://patch.msgid.link/20260309225408.27714-1-dakr@kernel.org
[ Use pub(super) where possible; replace bitwise-and with modulo
operator analogous to [1]. - Danilo ]
Link: https://lore.kernel.org/all/20260129-nova-core-cmdq1-v3-1-2ede85493a27@nvidia.com/ [1]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
All Qualcomm SoCs starting from SM8650 provide access to the Qualcomm
Trusted Execution Environment (QTEE) through the SMCInvoke interface,
implemented by the QCOMTEE driver. QTEE runs in the Secure World domain
on ARM64 CPUs and exposes secure services to Linux running in the Normal
World domain.
This change enables the QCOMTEE driver as a module to support
communication with QTEE.
QCOMTEE has been tested on a Qualcomm RB3Gen2 board by loading and
executing a Trusted Application via tests hosted at
github.com/qualcomm/minkipc.
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Reviewed-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Tested-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Reviewed-by: Amirreza Zarrabi <amirreza.zarrabi@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260114-qcom_qcomtee_defconfig-v4-1-ec676311171f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In docg3_release(), the docg3 pointer is obtained from
cascade->floors[0]->priv before the loop that calls
doc_release_device() on each floor. doc_release_device() frees the
docg3 struct via kfree(docg3) at line 1881. After the loop,
docg3->cascade->bch dereferences the already-freed pointer.
Fix this by accessing cascade->bch directly, which is equivalent
since docg3->cascade points back to the same cascade struct, and
is already available as a local variable. This also removes the
now-unused docg3 local variable.
Fixes: c8ae3f744d ("lib/bch: Rework a little bit the exported function names")
Cc: stable@vger.kernel.org
Signed-off-by: James Kim <james010kim@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
A flex array can be used to reduce the allocation to 1.
And actually mtdconcat was using the pointer + 1 trick to point to the
overallocated area. Better alternatives exist.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Simpler to reason about and avoids having to free nodes separately.
Also add __counted_by attribute for extra runtime analysis.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The function name in the kdoc comment is different from the name of the
function being documented, fix it.
Fixes: 43db6366fc ("mtd: Add driver for concatenating devices")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603041232.fNDHNtUa-lkp@intel.com/
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The LPVO USB GPIB adapter apparently uses an FTDI 8U232AM with the
default PID, but this device id is already handled by the ftdi_sio
serial driver.
Stop binding to the default PID to avoid breaking existing setups with
FTDI 8U232AM.
Anyone using this driver should blacklist the ftdi_sio driver and add
the device id manually through sysfs (e.g. using udev rules).
Fixes: fce79512a9 ("staging: gpib: Add LPVO DIY USB GPIB driver")
Fixes: e6ab504633 ("staging: gpib: Destage gpib")
Cc: Dave Penkler <dpenkler@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260305151729.10501-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb_role_switch_is_parent() was walking up to the parent node and checking
for the "usb-role-switch" property regardless of the type of the passed
fwnode. This could cause unrelated device nodes to be probed as potential
role switch parent, leading to spurious matches and "-EPROBE_DEFER" being
returned infinitely.
Till now only Type-B connector node will have a parent node which may
present "usb-role-switch" property and register the role switch device.
For Type-C connector node, its parent node will always be a Type-C chip
device which will never register the role switch device. However, it may
still present a non-boolean "usb-role-switch = <&usb_controller>" property
for historical compatibility.
So restrict the helper to only operate on Type-B connector when attempting
to get the role switch from parent node.
Fixes: 6fadd72943 ("usb: roles: get usb-role-switch from parent")
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Tested-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260309074313.2809867-3-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 1366cd228b.
The fwnode_usb_role_switch_get() returns NULL only if no connection is
found, returns ERR_PTR(-EPROBE_DEFER) if connection is found but deferred
probe is needed, or a valid pointer of usb_role_switch.
When switching from a NULL check to IS_ERR_OR_NULL(), usb_role_switch_get()
returns NULL and overwrites the ERR_PTR(-EPROBE_DEFER) returned by
fwnode_usb_role_switch_get(). This causes the deferred probe indication to
be lost, preventing the USB role switch from ever being retrieved.
Fixes: 1366cd228b ("tcpm: allow looking for role_sw device in the main node")
Cc: stable <stable@kernel.org>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Tested-by: Arnaud Ferraris <arnaud.ferraris@collabora.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260309074313.2809867-2-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The network device outlived its parent gadget device during
disconnection, resulting in dangling sysfs links and null pointer
dereference problems.
A prior attempt to solve this by removing SET_NETDEV_DEV entirely [1]
was reverted due to power management ordering concerns and a NO-CARRIER
regression.
A subsequent attempt to defer net_device allocation to bind [2] broke
1:1 mapping between function instance and network device, making it
impossible for configfs to report the resolved interface name. This
results in a regression where the DHCP server fails on pmOS.
Use device_move to reparent the net_device between the gadget device and
/sys/devices/virtual/ across bind/unbind cycles. This preserves the
network interface across USB reconnection, allowing the DHCP server to
retain their binding.
Introduce gether_attach_gadget()/gether_detach_gadget() helpers and use
__free(detach_gadget) macro to undo attachment on bind failure. The
bind_count ensures device_move executes only on the first bind.
[1] https://lore.kernel.org/lkml/f2a4f9847617a0929d62025748384092e5f35cce.camel@crapouillou.net/
[2] https://lore.kernel.org/linux-usb/795ea759-7eaf-4f78-81f4-01ffbf2d7961@ixit.cz/
Fixes: 40d133d7f5 ("usb: gadget: f_ncm: convert to new function interface with backward compatibility")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260309-f-ncm-revert-v2-7-ea2afbc7d9b2@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit e065c6a7e4.
This commit is being reverted as part of a series-wide revert.
By deferring the net_device allocation to the bind() phase, a single
function instance will spawn multiple network devices if it is symlinked
to multiple USB configurations.
This causes regressions for userspace tools (like the postmarketOS DHCP
daemon) that rely on reading the interface name (e.g., "usb0") from
configfs. Currently, configfs returns the template "usb%d", causing the
userspace network setup to fail.
Crucially, because this patch breaks the 1:1 mapping between the
function instance and the network device, this naming issue cannot
simply be patched. Configfs only exposes a single 'ifname' attribute per
instance, making it impossible to accurately report the actual interface
name when multiple underlying network devices can exist for that single
instance.
All configurations tied to the same function instance are meant to share
a single network device. Revert this change to restore the 1:1 mapping
by allocating the network device at the instance level (alloc_inst).
Reported-by: David Heidelberg <david@ixit.cz>
Closes: https://lore.kernel.org/linux-usb/70b558ea-a12e-4170-9b8e-c951131249af@ixit.cz/
Fixes: 56a512a9b4 ("usb: gadget: f_ncm: align net_device lifecycle with bind/unbind")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260309-f-ncm-revert-v2-6-ea2afbc7d9b2@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 7a7930c0f9.
This commit is being reverted as part of a series-wide revert.
By deferring the net_device allocation to the bind() phase, a single
function instance will spawn multiple network devices if it is symlinked
to multiple USB configurations.
This causes regressions for userspace tools (like the postmarketOS DHCP
daemon) that rely on reading the interface name (e.g., "usb0") from
configfs. Currently, configfs returns the template "usb%d", causing the
userspace network setup to fail.
Crucially, because this patch breaks the 1:1 mapping between the
function instance and the network device, this naming issue cannot
simply be patched. Configfs only exposes a single 'ifname' attribute per
instance, making it impossible to accurately report the actual interface
name when multiple underlying network devices can exist for that single
instance.
All configurations tied to the same function instance are meant to share
a single network device. Revert this change to restore the 1:1 mapping
by allocating the network device at the instance level (alloc_inst).
Reported-by: David Heidelberg <david@ixit.cz>
Closes: https://lore.kernel.org/linux-usb/70b558ea-a12e-4170-9b8e-c951131249af@ixit.cz/
Fixes: 56a512a9b4 ("usb: gadget: f_ncm: align net_device lifecycle with bind/unbind")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260309-f-ncm-revert-v2-5-ea2afbc7d9b2@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 0c0981126b.
This commit is being reverted as part of a series-wide revert.
By deferring the net_device allocation to the bind() phase, a single
function instance will spawn multiple network devices if it is symlinked
to multiple USB configurations.
This causes regressions for userspace tools (like the postmarketOS DHCP
daemon) that rely on reading the interface name (e.g., "usb0") from
configfs. Currently, configfs returns the template "usb%d", causing the
userspace network setup to fail.
Crucially, because this patch breaks the 1:1 mapping between the
function instance and the network device, this naming issue cannot
simply be patched. Configfs only exposes a single 'ifname' attribute per
instance, making it impossible to accurately report the actual interface
name when multiple underlying network devices can exist for that single
instance.
All configurations tied to the same function instance are meant to share
a single network device. Revert this change to restore the 1:1 mapping
by allocating the network device at the instance level (alloc_inst).
Reported-by: David Heidelberg <david@ixit.cz>
Closes: https://lore.kernel.org/linux-usb/70b558ea-a12e-4170-9b8e-c951131249af@ixit.cz/
Fixes: 56a512a9b4 ("usb: gadget: f_ncm: align net_device lifecycle with bind/unbind")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260309-f-ncm-revert-v2-4-ea2afbc7d9b2@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 56a512a9b4.
This commit is being reverted as part of a series-wide revert.
By deferring the net_device allocation to the bind() phase, a single
function instance will spawn multiple network devices if it is symlinked
to multiple USB configurations.
This causes regressions for userspace tools (like the postmarketOS DHCP
daemon) that rely on reading the interface name (e.g., "usb0") from
configfs. Currently, configfs returns the template "usb%d", causing the
userspace network setup to fail.
Crucially, because this patch breaks the 1:1 mapping between the
function instance and the network device, this naming issue cannot
simply be patched. Configfs only exposes a single 'ifname' attribute per
instance, making it impossible to accurately report the actual interface
name when multiple underlying network devices can exist for that single
instance.
All configurations tied to the same function instance are meant to share
a single network device. Revert this change to restore the 1:1 mapping
by allocating the network device at the instance level (alloc_inst).
Reported-by: David Heidelberg <david@ixit.cz>
Closes: https://lore.kernel.org/linux-usb/70b558ea-a12e-4170-9b8e-c951131249af@ixit.cz/
Fixes: 56a512a9b4 ("usb: gadget: f_ncm: align net_device lifecycle with bind/unbind")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260309-f-ncm-revert-v2-3-ea2afbc7d9b2@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit fde0634ad9.
This commit is being reverted as part of a series-wide revert.
By deferring the net_device allocation to the bind() phase, a single
function instance will spawn multiple network devices if it is symlinked
to multiple USB configurations.
This causes regressions for userspace tools (like the postmarketOS DHCP
daemon) that rely on reading the interface name (e.g., "usb0") from
configfs. Currently, configfs returns the template "usb%d", causing the
userspace network setup to fail.
Crucially, because this patch breaks the 1:1 mapping between the
function instance and the network device, this naming issue cannot
simply be patched. Configfs only exposes a single 'ifname' attribute per
instance, making it impossible to accurately report the actual interface
name when multiple underlying network devices can exist for that single
instance.
All configurations tied to the same function instance are meant to share
a single network device. Revert this change to restore the 1:1 mapping
by allocating the network device at the instance level (alloc_inst).
Reported-by: David Heidelberg <david@ixit.cz>
Closes: https://lore.kernel.org/linux-usb/70b558ea-a12e-4170-9b8e-c951131249af@ixit.cz/
Fixes: 56a512a9b4 ("usb: gadget: f_ncm: align net_device lifecycle with bind/unbind")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260309-f-ncm-revert-v2-2-ea2afbc7d9b2@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 0d6c8144ca.
This commit is being reverted as part of a series-wide revert.
By deferring the net_device allocation to the bind() phase, a single
function instance will spawn multiple network devices if it is symlinked
to multiple USB configurations.
This causes regressions for userspace tools (like the postmarketOS DHCP
daemon) that rely on reading the interface name (e.g., "usb0") from
configfs. Currently, configfs returns the template "usb%d", causing the
userspace network setup to fail.
Crucially, because this patch breaks the 1:1 mapping between the
function instance and the network device, this naming issue cannot
simply be patched. Configfs only exposes a single 'ifname' attribute per
instance, making it impossible to accurately report the actual interface
name when multiple underlying network devices can exist for that single
instance.
All configurations tied to the same function instance are meant to share
a single network device. Revert this change to restore the 1:1 mapping
by allocating the network device at the instance level (alloc_inst).
Reported-by: David Heidelberg <david@ixit.cz>
Closes: https://lore.kernel.org/linux-usb/70b558ea-a12e-4170-9b8e-c951131249af@ixit.cz/
Fixes: 56a512a9b4 ("usb: gadget: f_ncm: align net_device lifecycle with bind/unbind")
Cc: stable <stable@kernel.org>
Signed-off-by: Kuen-Han Tsai <khtsai@google.com>
Link: https://patch.msgid.link/20260309-f-ncm-revert-v2-1-ea2afbc7d9b2@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dp_altmode_configure sets the signaling rate to the current
configuration's rate and then shifts the value to the Select
Configuration bitfield. On the initial configuration, dp->data.conf
is 0 to begin with, so the signaling rate field is never set, which
leads to some DisplayPort Alt Mode partners sending NAK to the
Configure message.
Set the signaling rate to the capabilities supported by both the
port and the port partner. If the cable supports DisplayPort Alt Mode,
then include its capabilities as well.
Fixes: a17fae8fc3 ("usb: typec: Add Displayport Alternate Mode 2.1 Support")
Cc: stable <stable@kernel.org>
Signed-off-by: RD Babiera <rdbabiera@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260310204106.3939862-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The condition for checking the disabled pinctrl state incorrectly checks
gf->enabled_state instead of gf->disabled_state. This causes misleading
error messages and could lead to incorrect behavior when only one of the
pinctrl states is defined.
Fix the condition to properly check gf->disabled_state.
Fixes: 9d3b5086f6 ("mtd: physmap_of_gemini: Handle pin control")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
This patch adds the necessary PCI ID for Intel Nova Lake -H
devices.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Cc: stable <stable@kernel.org>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260309130204.208661-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Similar to other Huawei LTE modules using this quirk, this version with
another vid/pid suffers from spurious wakeups.
Setting the quirk fixes the issue for this device as well.
Cc: stable <stable@kernel.org>
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260306172817.2098898-1-wse@tuxedocomputers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As noticed in the discussion [1] the Baikal SoC and platforms
are not going to be finalized, hence remove stale code.
Link: https://lore.kernel.org/lkml/22b92ddf-6321-41b5-8073-f9c7064d3432@infradead.org/ [1]
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Michal reported and debgged a NULL pointer dereference bug in the
recently added portli debugfs files
Oops is caused when there are more port registers counted in
xhci->max_ports than ports reported by Supported Protocol capabilities.
This is possible if max_ports is more than maximum port number, or
if there are gaps between ports of different speeds the 'Supported
Protocol' capabilities.
In such cases port->rhub will be NULL so we can't reach xhci behind it.
Add an explicit NULL check for this case, and print portli in hex
without dereferencing port->rhub.
Reported-by: Michal Pecio <michal.pecio@gmail.com>
Closes: https://lore.kernel.org/linux-usb/20260304103856.48b785fd.michal.pecio@gmail.com
Fixes: 384c57ec72 ("usb: xhci: Add debugfs support for xHCI Port Link Info (PORTLI) register.")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260304223639.3882398-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
