fec_decode_bufs() assumes that the parity bytes of the first RS codeword
it decodes are never split across parity blocks.
This assumption is false. Consider v->fec->block_size == 4096 &&
v->fec->roots == 17 && fio->nbufs == 1, for example. In that case, each
call to fec_decode_bufs() consumes v->fec->roots * (fio->nbufs <<
DM_VERITY_FEC_BUF_RS_BITS) = 272 parity bytes.
Considering that the parity data for each message block starts on a
block boundary, the byte alignment in the parity data will iterate
through 272*i mod 4096 until the 3 parity blocks have been consumed. On
the 16th call (i=15), the alignment will be 4080 bytes into the first
block. Only 16 bytes remain in that block, but 17 parity bytes will be
needed. The code reads out-of-bounds from the parity block buffer.
Fortunately this doesn't normally happen, since it can occur only for
certain non-default values of fec_roots *and* when the maximum number of
buffers couldn't be allocated due to low memory. For example with
block_size=4096 only the following cases are affected:
fec_roots=17: nbufs in [1, 3, 5, 15]
fec_roots=19: nbufs in [1, 229]
fec_roots=21: nbufs in [1, 3, 5, 13, 15, 39, 65, 195]
fec_roots=23: nbufs in [1, 89]
Regardless, fix it by refactoring how the parity blocks are read.
Fixes: 6df90c02ba ("dm-verity FEC: Fix RS FEC repair for roots unaligned to block size (take 2)")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
At most 25 entries in dm_verity_fec_io::erasures are used: the maximum
number of FEC roots plus one. Therefore, set the array size
accordingly. This reduces the size of dm_verity_fec_io by 912 bytes.
Note: a later commit introduces a constant DM_VERITY_FEC_MAX_ROOTS,
which allows the size to be more clearly expressed as
DM_VERITY_FEC_MAX_ROOTS + 1. This commit just fixes the size first.
Fixes: a739ff3f54 ("dm verity: add support for forward error correction")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
dm_verity_fec::corrected seems to have been intended to count the number
of corrected blocks. However, it actually counted the number of calls
to fec_decode_bufs() that corrected at least one error. That's not the
same thing. For example, in low-memory situations correcting a single
block can require many calls to fec_decode_bufs().
Fix it to count corrected blocks instead.
Fixes: ae97648e14 ("dm verity fec: Expose corrected block count via status")
Cc: Shubhankar Mishra <shubhankarm@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fix verity_fec_ctr() to reject too-small hash devices by correctly
taking hash_start into account.
Note that this is necessary because dm-verity doesn't call
dm_bufio_set_sector_offset() on the hash device's bufio client
(v->bufio). Thus, dm_bufio_get_device_size(v->bufio) returns a size
relative to 0 rather than hash_start. An alternative fix would be to
call dm_bufio_set_sector_offset() on v->bufio, but then all the code
that reads from the hash device would have to be adjusted accordingly.
Fixes: a739ff3f54 ("dm verity: add support for forward error correction")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Fix verity_fec_ctr() to reject too-small FEC devices by correctly
computing the number of parity blocks as 'f->rounds * f->roots'.
Previously it incorrectly used 'div64_u64(f->rounds * f->roots,
v->fec->roots << SECTOR_SHIFT)' which is a much smaller value.
Note that the units of 'rounds' are blocks, not bytes. This matches the
units of the value returned by dm_bufio_get_device_size(), which are
also blocks. A later commit will give 'rounds' a clearer name.
Fixes: a739ff3f54 ("dm verity: add support for forward error correction")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Surface Pro 3 button ACPI driver to a
platform one.
After this change, the subordinate input device and wakeup source class
device will be registered under the platform device used for driver
binding instead of its ACPI companion.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3207406.CbtlEUcBR6@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/1881356.TLkxdtWsSY@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The wakeup source added by device_init_wakeup() in surface_button_add()
needs to be dropped during driver removal, so update the driver to do
that.
Fixes: 19351f3407 ("platform/x86: surfacepro3: Support for wakeup from suspend-to-idle")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/4368848.1IzOArtZ34@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The local variable region_count in create_log_context() is declared as
unsigned int (32-bit), but dm_sector_div_up() returns sector_t (64-bit).
When a device-mapper target has a sufficiently large ti->len with a small
region_size, the division result can exceed UINT_MAX. The truncated
value is then used to calculate bitset_size, causing clean_bits,
sync_bits, and recovering_bits to be allocated far smaller than needed
for the actual number of regions.
Subsequent log operations (log_set_bit, log_clear_bit, log_test_bit) use
region indices derived from the full untruncated region space, causing
out-of-bounds writes to kernel heap memory allocated by vmalloc.
This can be reproduced by creating a mirror target whose region_count
overflows 32 bits:
dmsetup create bigzero --table '0 8589934594 zero'
dmsetup create mymirror --table '0 8589934594 mirror \
core 2 2 nosync 2 /dev/mapper/bigzero 0 \
/dev/mapper/bigzero 0'
The status output confirms the truncation (sync_count=1 instead of
4294967297, because 0x100000001 was truncated to 1):
$ dmsetup status mymirror
0 8589934594 mirror 2 254:1 254:1 1/4294967297 ...
This leads to a kernel crash in core_in_sync:
BUG: scheduling while atomic: (udev-worker)/9150/0x00000000
RIP: 0010:core_in_sync+0x14/0x30 [dm_log]
CR2: 0000000000000008
Fixing recursive fault but reboot is needed!
Fix by widening the local region_count to sector_t and adding an
explicit overflow check before the value is assigned to lc->region_count.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
When failing to acquire the root_lock in dm_cache_metadata_abort because
the block_manager is read-only, the temporary block_manager created
outside the root_lock is not properly released, causing a memory leak.
Reproduce steps:
This can be reproduced by reloading a new table while the metadata
is read-only. While the second call to dm_cache_metadata_abort is
caused by lack of support for table preload in dm-cache, mentioned
in commit 9b1cc9f251 ("dm cache: share cache-metadata object across
inactive and active DM tables"), it exposes the memory leak in
dm_cache_metadata_abort when the function is called multiple times.
Specifically, dm-cache fails to sync the new cache object's mode during
preresume, creating the reproducer condition.
This issue could also occur through concurrent metadata_operation_failed
calls due to races in cache mode updates, but the table preload scenario
below provides a reliable reproducer.
1. Create a cache device with some faulty trailing metadata blocks
dmsetup create cmeta <<EOF
0 200 linear /dev/sdc 0
200 7992 error
EOF
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 262144 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 131072 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 1 writethrough smq 0"
2. Suspend and resume the cache to start a new metadata transaction and
trigger metadata io errors on the next metadata commit.
dmsetup suspend cache
dmsetup resume cache
3. Write to the cache device to update metadata
fio --filename=/dev/mapper/cache --name test --rw=randwrite --bs=4k \
--randrepeat=0 --direct=1 --size 64k
4. Preload the same table
dmsetup reload cache --table "$(dmsetup table cache)"
5. Resume the new table. This triggers the memory leak.
dmsetup suspend cache
dmsetup resume cache
kmemleak logs:
<snip>
unreferenced object 0xffff8880080c2010 (size 16):
comm "dmsetup", pid 132, jiffies 4294982580
hex dump (first 16 bytes):
00 38 b9 07 80 88 ff ff 6a 6b 6b 6b 6b 6b 6b a5 ...
backtrace (crc 3118f31c):
kmemleak_alloc+0x28/0x40
__kmalloc_cache_noprof+0x3d9/0x510
dm_block_manager_create+0x51/0x140
dm_cache_metadata_abort+0x85/0x320
metadata_operation_failed+0x103/0x1e0
cache_preresume+0xacd/0xe70
dm_table_resume_targets+0xd3/0x320
__dm_resume+0x1b/0xf0
dm_resume+0x127/0x170
<snip>
Fixes: 352b837a55 ("dm cache: Fix ABBA deadlock between shrink_slab and dm_cache_metadata_abort")
Signed-off-by: Ming-Hung Tsai <mtsai@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Allow the file system to limit the size processed in a single
bounce operation. This is needed when generating integrity data
so that the size of a single integrity segment can't overflow.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a set of helpers for file system initiated integrity information.
These include mempool backed allocations and verifying based on a passed
in sector and size which is often available from file system completion
routines.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
File systems that generate integrity will need this, so move it out
of the block private or blk-mq specific headers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Return the status from verify instead of directly stashing it in the bio,
and rename the helpers to use the usual bio_ prefix for things operating
on a bio.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Factor out a helper to see if the block device has an integrity checksum
from bdev_stable_writes so that it can be reused for other checks.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add a helper to set the seed and check flag based on useful defaults
from the profile.
Note that this includes a small behavior change, as we now only set the
seed if any action is set, which is fine as nothing will look at it
otherwise.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split the logic to see if a bio needs integrity metadata from
bio_integrity_prep into a reusable helper than can be called from
file system code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Kanchan Joshi <joshi.k@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Tested-by: Anuj Gupta <anuj20.g@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Intel Smart Connect disabling ACPI
driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/24282289.6Emhk5qWAg@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Intel Rapid Start Technology (rst) ACPI
driver to a platform one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3599223.QJadu78ljV@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In addition to the digital volume adjustment, infineon peb2466 codec
has an analog adjustment which can be set to either 0dB or +/-6dB.
At the time being it is defined as a switch and appears in 'alsamixer'
like a 'mute'.
This adjustment isn't a mute, change it to a 'volume' with an
associated dB range.
With this change, this adjustment now appears in 'alsamixer' as a
standard volume slider which can have two positions.
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Acked-by: Herve Codina <herve.codina@bootlin.com>
Link: https://patch.msgid.link/418fe76d1c9efc8182ab57b6b426a8c723e025fe.1773056714.git.chleroy@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
In cs35l56_test_parse_xu_onchip_spkid() the first two loops used
local i to index an array and num_gpios/num_pulls to count how
many entries it had seen. But both i and num_* started at 0 and
incremented on each loop so were identical. Remove i from these
loops.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260309115651.1090368-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When UBLK_F_NO_AUTO_PART_SCAN is set, GD_SUPPRESS_PART_SCAN is cleared
unconditionally, including for unprivileged daemons. Keep it consistent
with the code block for setting GD_SUPPRESS_PART_SCAN by not clearing
it for unprivileged daemons.
In reality this isn't a problem because ioctl(BLKRRPART) requires
CAP_SYS_ADMIN, but it is more reliable to not clear the bit.
Cc: Alexander Atanasov <alex@zazolabs.com>
Fixes: 8443e2087e ("ublk: add UBLK_F_NO_AUTO_PART_SCAN feature flag")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the EEEPC laptop ACPI driver to a platform
one.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/3329436.5fSG56mABF@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/3681264.iIbC2pHGDl@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
People previously asked for the notification CQE to have a different
user_data value from the main request completion. It's useful to
separate buffer and request handling logic and avoid separately
refcounting the request.
Let the user pass the notification user_data in sqe->addr3. If zero,
it'll inherit sqe->user_data as before. It doesn't change the rules for
when the user can expect a notification CQE, and it should still check
the IORING_CQE_F_MORE flag.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Enable IORING_SEND_VECTORIZED with registered buffers for
IORING_OP_SEND_ZC. Set IORING_SEND_VECTORIZED for all msg send requests
to differentiate if the vectorised version is expected.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
One the things the user has always keep in mind is that any user
pointers they put into an SQE is not going to be read by the kernel
until submission happens, and the user has to ensure the pointee stays
alive until then. For example, snippet below will lead to UAF of the on
stack variable ts. Instead of passing the timeout value as a pointer
allow to store it immediately in the SQE. The user has to set a new flag
called IORING_TIMEOUT_IMMEDIATE_ARG, in which case sqe->addr for timeout
or sqe->addr2 for timeout update requests will be interpreted as a time
value in nanosecods.
void prep_timeout(struct io_uring_sqe *sqe) {
struct __kernel_timespec ts = {...};
prep_timeout(sqe, &ts);
}
void submit() {
sqe = get_sqe();
prep_timeout(sqe);
io_uring_submit();
}
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It'll be more convenient for next patches to keep ktime in requests
instead of timespec64. Convert everything to ktime right after user
argument parsing at request prep time.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There is some duplication for timespec checks that can be deduplicated
with a new function, and it'll be extended in next patches.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Zero check unused SQE fields addr3 and pad2 for timeout and timeout
update requests. They're not needed now, but could be used sometime
in the future.
Cc: stable@vger.kernel.org
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split out zcrx uapi into a separate file. It'll be easier to manage it
this way, and that reduces the size of a not so small io_uring.h. Since
there are users that expect that zcrx definitions come with io_uring.h,
it includes the new file.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add constants for zcrx features and supported registration flags that
can be reused by the query code. I was going to add another registration
flag, and this patch helps to avoid duplication and keeps changes
specific to zcrx files.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_send_zc and io_sendmsg_zc started different but now the only real
difference between them is how registered buffers are imported and
which net helper we use. Avoid duplication and combine them into a
single function.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Unify send and sendmsg zerocopy paths for importing registered buffers
and make io_send_zc_import() responsible for that. It's a preparation
patch making the next change simpler.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The name "flags" is too overloaded, so rename the variable in
io_sendmsg_zc() into msg_flags to stress that it contains MSG_*.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_uring_cmd_sock() originally supported two ioctl-based cmd_op
operations. Over time, additional operations were added with tail calls
to their helpers.
This approach resulted in the new operations sharing an ioctl check
with the original operations.
io_uring_cmd_sock() now supports 6 operations, so let's move the
implementation of the original two into their own helper, reducing
io_uring_cmd_sock() to a simple dispatcher.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Convert the Renesas SDHI SD/SDIO controller driver using SYS-DMAC from
an open-coded dev_pm_ops structure to DEFINE_RUNTIME_DEV_PM_OPS() and
pm_ptr(). This simplifies the code, and reduces kernel size in case
CONFIG_PM is disabled.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This patch describes the two MMC controllers of the Loongson-2K0300 SoC,
one providing an eMMC interface and the other exporting an SD/SDIO
interface.
Its hardware design is similar to that of the Loongson-2K2000, but it
suffers from hardware defects such as missing CMD48 interrupts.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
More Loongson SoCs will be added, gathering all SoC private data
(`loongson2_mmc_pdata`) together to make the code clearer.
No functional change intended.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add "loongson,ls2k0300-mmc" dedicated compatible to represent the
eMMC/SD/SDIO controller interface of the Loongson-2K0300 chip.
Its hardware design is similar to that of the Loongson-2K2000, but it
suffers from hardware defects such as missing CMD48 interrupts.
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
In all cases in which a struct acpi_driver is used for binding a driver
to an ACPI device object, a corresponding platform device is created by
the ACPI core and that device is regarded as a proper representation of
underlying hardware. Accordingly, a struct platform_driver should be
used by driver code to bind to that device. There are multiple reasons
why drivers should not bind directly to ACPI device objects [1].
Overall, it is better to bind drivers to platform devices than to their
ACPI companions, so convert the Acer wireless ACPI driver to a platform
one.
After this change, the subordinate input device will be registered
under the platform device used for driver binding instead of its ACPI
companion.
While this is not expected to alter functionality, it changes sysfs
layout and so it will be visible to user space.
Link: https://lore.kernel.org/all/2396510.ElGaqSPkdT@rafael.j.wysocki/ [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2032103.PYKUYFuaPT@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
To facilitate subsequent conversion of the driver to a platform one,
make it install an ACPI notify handler directly instead of using
a .notify() callback in struct acpi_driver.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/10810967.nUPlyArG6x@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In sdhci_bst_alloc_bounce_buffer(), if dma_alloc_coherent() fails, the
function immediately returns -ENOMEM without releasing the reserved
memory, which results in a memory leak.
Add the missing of_reserved_mem_device_release() call before returning
-ENOMEM to properly clean up the reserved memory.
Fixes: 695824f456 ("mmc: sdhci: add Black Sesame Technologies BST C1200 controller driver")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The mux branch contains updates to the mux core along with some
corresponding changes for a couple of consumer drivers, including an mmc
driver. Let's merge it into the next branch to get it tested and queued for
the next release.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Some hardware designs route data or control signals through a mux to
support multiple devices on a single sdhi controller.
In particular SolidRun RZ/G2L/G2LC/V2L System on Module use a mux for
switching between soldered eMMC and an optional microSD on a carrier
board, e.g. for development or provisioning.
SD/SDIO/eMMC are not well suited for runtime switching between different
cards, however boot-time selection is possible and useful - in
particular considering dt overlays.
Add support for an optional SD/SDIO/eMMC mux defined in dt, and select
it during probe.
Similar functionality already exists in other places, e.g. i2c-omap.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The multiplexer subsystem was initially designed to be completely
hidden, relying on consumers to "select MULTIPLEXER" explicitly.
Drivers implementing multiplexers depend on this hidden symbol.
This prevents users from manually enabling both the mux core and any of
the multiplexer drivers.
All multiplexer drivers in drivers/mux/ can operate standalone without a
consumer. This is particularly useful in a device-tree, where a default
state can be set through the idle-state property.
Over time, several drivers have added "select MULTIPLEXER" dependencies,
some of which require a mux and some consider it optional. v7.0-rc1
shows 15 such occurrences in Kconfig files, in a variety of subsystems.
The natural step forward to allow enabling mux core and drivers would be
adding a prompt and help text to the existing symbol.
This violates the general Kbuild advice to avoid selecting visible
symbols for all existing consumers of the mux core.
Add the new config symbol MUX_CORE with a prompt and help text as a
wrapper for users to enable manually. This avoids existing consumers
automatically selecting a visible symbol.
Change the MULTIPLEXER symbol from tristate to bool. This avoids complex
dependencies if users were to attempt a configuration where the mux is a
module but one of its consumers is built-in, as well as difficulties
keeping the state of visible and invisible symbols in sync.
Further convert the "menu ... depends on ..." structure to "if ... menu
... endmenu endif". These are functionally equivalent, but the new
structure is more efficient and can support future source statements
within the conditional block.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add mux controller support for data or control lines that are muxed
between a host and multiple cards.
There are several devices supporting a choice of eMMC or SD on a single
board by both dip switch and gpio, e.g. Renesas RZ/G2L SMARC SoM and
SolidRun RZ/G2L SoM.
In-tree dts for the Renesas boards currently rely on preprocessor macros
and gpio hogs to describe the respective cards.
By adding mux-states property to sdhi controller description, boards can
correctly describe the mux that already exists in hardware - and drivers
can coordinate between mux selection and probing for cards.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
