In decode_choice(), the boundary check before get_len() uses the
variable `len`, which is still 0 from its initialization at the top of
the function:
unsigned int type, ext, len = 0;
...
if (ext || (son->attr & OPEN)) {
BYTE_ALIGN(bs);
if (nf_h323_error_boundary(bs, len, 0)) /* len is 0 here */
return H323_ERROR_BOUND;
len = get_len(bs); /* OOB read */
When the bitstream is exactly consumed (bs->cur == bs->end), the check
nf_h323_error_boundary(bs, 0, 0) evaluates to (bs->cur + 0 > bs->end),
which is false. The subsequent get_len() call then dereferences
*bs->cur++, reading 1 byte past the end of the buffer. If that byte
has bit 7 set, get_len() reads a second byte as well.
This can be triggered remotely by sending a crafted Q.931 SETUP message
with a User-User Information Element containing exactly 2 bytes of
PER-encoded data ({0x08, 0x00}) to port 1720 through a firewall with
the nf_conntrack_h323 helper active. The decoder fully consumes the
PER buffer before reaching this code path, resulting in a 1-2 byte
heap-buffer-overflow read confirmed by AddressSanitizer.
Fix this by checking for 2 bytes (the maximum that get_len() may read)
instead of the uninitialized `len`. This matches the pattern used at
every other get_len() call site in the same file, where the caller
checks for 2 bytes of available data before calling get_len().
Fixes: ec8a8f3c31 ("netfilter: nf_ct_h323: Extend nf_h323_error_boundary to work on bits as well")
Signed-off-by: Vahagn Vardanian <vahagn@redrays.io>
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20260225130619.1248-2-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
While today all our DGFX platforms have LMTT, we already started
preparation to do not rely on this assumption. Add check for the
LMTT presence and return default page size as VRAM/LMEM alignment
if there is no LMTT.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260221152230.7071-4-michal.wajdeczko@intel.com
There is no need to always request VRAM BO to have 2MB alignment
as for now this is required by the LMTT only, which could be not
present on some platforms with VRAM.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260221152230.7071-3-michal.wajdeczko@intel.com
When we are about to provision VRAM/LMEM for VF, there is no point
in using semi-automatic flag that supports fallback to the SMEM.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260221152230.7071-2-michal.wajdeczko@intel.com
In cs35l56_hda_posture_put() assign ucontrol->value.integer.value[0] to
a long instead of an unsigned long. ucontrol->value.integer.value[0] is
a long.
This fixes the sparse warning:
sound/hda/codecs/side-codecs/cs35l56_hda.c:256:20: warning: unsigned value
that used to be signed checked against zero?
sound/hda/codecs/side-codecs/cs35l56_hda.c:252:29: signed value source
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 73cfbfa9ca ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Link: https://patch.msgid.link/20260226111728.1700431-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The driver obtains sw_attr.num_ifs from firmware via dpsw_get_attributes()
but never validates it against DPSW_MAX_IF (64). This value controls
iteration in dpaa2_switch_fdb_get_flood_cfg(), which writes port indices
into the fixed-size cfg->if_id[DPSW_MAX_IF] array. When firmware reports
num_ifs >= 64, the loop can write past the array bounds.
Add a bound check for num_ifs in dpaa2_switch_init().
dpaa2_switch_fdb_get_flood_cfg() appends the control interface (port
num_ifs) after all matched ports. When num_ifs == DPSW_MAX_IF and all
ports match the flood filter, the loop fills all 64 slots and the control
interface write overflows by one entry.
The check uses >= because num_ifs == DPSW_MAX_IF is also functionally
broken.
build_if_id_bitmap() silently drops any ID >= 64:
if (id[i] < DPSW_MAX_IF)
bmap[id[i] / 64] |= ...
Fixes: 539dda3c5d ("staging: dpaa2-switch: properly setup switching domains")
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/SYBPR01MB78812B47B7F0470B617C408AAF74A@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, the churn state is printed only in sysfs. Add netlink support
so users could get the state via netlink.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20260224020215.6012-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The kernel-mode PPPoE relay feature and its two associated ioctls
(PPPOEIOCSFWD and PPPOEIOCDFWD) are not used by any existing userspace
PPPoE implementations. The most commonly-used package, RP-PPPoE [1],
handles the relaying entirely in userspace.
This legacy code has remained in the driver since its introduction in
kernel 2.3.99-pre7 for over two decades, but has served no practical
purpose.
Remove the unused relay code.
[1] https://dianne.skoll.ca/projects/rp-pppoe/
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Link: https://patch.msgid.link/20260224015053.42472-1-dqfext@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
udpgro_frglist.sh and udpgro_bench.sh are the flakiest tests
currently in NIPA. They fail in the same exact way, TCP GRO
test stalls occasionally and the test gets killed after 10min.
These tests use veth to simulate GRO. They attach a trivial
("return XDP_PASS;") XDP program to the veth to force TSO off
and NAPI on.
Digging into the failure mode we can see that the connection
is completely stuck after a burst of drops. The sender's snd_nxt
is at sequence number N [1], but the receiver claims to have
received (rcv_nxt) up to N + 3 * MSS [2]. Last piece of the puzzle
is that senders rtx queue is not empty (let's say the block in
the rtx queue is at sequence number N - 4 * MSS [3]).
In this state, sender sends a retransmission from the rtx queue
with a single segment, and sequence numbers N-4*MSS:N-3*MSS [3].
Receiver sees it and responds with an ACK all the way up to
N + 3 * MSS [2]. But sender will reject this ack as TCP_ACK_UNSENT_DATA
because it has no recollection of ever sending data that far out [1].
And we are stuck.
The root cause is the mess of the xmit return codes. veth returns
an error when it can't xmit a frame. We end up with a loss event
like this:
-------------------------------------------------
| GSO super frame 1 | GSO super frame 2 |
|-----------------------------------------------|
| seg | seg | seg | seg | seg | seg | seg | seg |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
-------------------------------------------------
x ok ok <ok>| ok ok ok <x>
\\
snd_nxt
"x" means packet lost by veth, and "ok" means it went thru.
Since veth has TSO disabled in this test it sees individual segments.
Segment 1 is on the retransmit queue and will be resent.
So why did the sender not advance snd_nxt even tho it clearly did
send up to seg 8? tcp_write_xmit() interprets the return code
from the core to mean that data has not been sent at all. Since
TCP deals with GSO super frames, not individual segment the crux
of the problem is that loss of a single segment can be interpreted
as loss of all. TCP only sees the last return code for the last
segment of the GSO frame (in <> brackets in the diagram above).
Of course for the problem to occur we need a setup or a device
without a Qdisc. Otherwise Qdisc layer disconnects the protocol
layer from the device errors completely.
We have multiple ways to fix this.
1) make veth not return an error when it lost a packet.
While this is what I think we did in the past, the issue keeps
reappearing and it's annoying to debug. The game of whack
a mole is not great.
2) fix the damn return codes
We only talk about NETDEV_TX_OK and NETDEV_TX_BUSY in the
documentation, so maybe we should make the return code from
ndo_start_xmit() a boolean. I like that the most, but perhaps
some ancient, not-really-networking protocol would suffer.
3) make TCP ignore the errors
It is not entirely clear to me what benefit TCP gets from
interpreting the result of ip_queue_xmit()? Specifically once
the connection is established and we're pushing data - packet
loss is just packet loss?
4) this fix
Ignore the rc in the Qdisc-less+GSO case, since it's unreliable.
We already always return OK in the TCQ_F_CAN_BYPASS case.
In the Qdisc-less case let's be a bit more conservative and only
mask the GSO errors. This path is taken by non-IP-"networks"
like CAN, MCTP etc, so we could regress some ancient thing.
This is the simplest, but also maybe the hackiest fix?
Similar fix has been proposed by Eric in the past but never committed
because original reporter was working with an OOT driver and wasn't
providing feedback (see Link).
Link: https://lore.kernel.org/CANn89iJcLepEin7EtBETrZ36bjoD9LrR=k4cfwWh046GB+4f9A@mail.gmail.com
Fixes: 1f59533f9c ("qdisc: validate frames going through the direct_xmit path")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260223235100.108939-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Update the vsock child_ns_mode documentation to include the new
write-once semantics of setting child_ns_mode. The semantics are
implemented in a preceding patch in this series.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260223-vsock-ns-write-once-v3-3-c0cde6959923@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Two administrator processes may race when setting child_ns_mode as one
process sets child_ns_mode to "local" and then creates a namespace, but
another process changes child_ns_mode to "global" between the write and
the namespace creation. The first process ends up with a namespace in
"global" mode instead of "local". While this can be detected after the
fact by reading ns_mode and retrying, it is fragile and error-prone.
Make child_ns_mode write-once so that a namespace manager can set it
once and be sure it won't change. Writing a different value after the
first write returns -EBUSY. This applies to all namespaces, including
init_net, where an init process can write "local" to lock all future
namespaces into local mode.
Fixes: eafb64f40c ("vsock: add netns to vsock core")
Suggested-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Co-developed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260223-vsock-ns-write-once-v3-2-c0cde6959923@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The child_ns_mode sysctl parameter becomes write-once in a future patch
in this series, which breaks existing tests. This patch updates the
tests to respect this new policy. No additional tests are added.
Add "global-parent" and "local-parent" namespaces as intermediaries to
spawn namespaces in the given modes. This avoids the need to change
"child_ns_mode" in the init_ns. nsenter must be used because ip netns
unshares the mount namespace so nested "ip netns add" breaks exec calls
from the init ns. Adds nsenter to the deps check.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260223-vsock-ns-write-once-v3-1-c0cde6959923@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acquiring an uninitialized raw_spin_lock is invalid and may trigger
unexpected behavior or spin_bug.
Fixes: f78d206f3d ("Coresight: Add Coresight TMC Control Unit driver")
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20260219-fix-spin-lock-issue-v1-1-557f7d513d7e@oss.qualcomm.com
This function will be necessary to determine the upper limit of
rx-page-size.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260223204155.1783580-15-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If set, take rx_page_size into consideration when calculating
the page shift in Multi Packet WQE mode.
The queue config is saved in the mlx5e_rq_opt_param struct which is
added to the mlx5e_channel_param struct. Now the configuration can be
read from the struct instead of adding it as an argument to all call
sites. For consistency, the queue config is assigned in
mlx5e_build_channel_param().
The queue configuration is read only from queue management ops
as that's the only place where it is currently useful. Furthermore,
netdev_queue_config() expects netdev->queue_mgmt_ops to be
set which is not always the case (representor netdevs).
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260223204155.1783580-14-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
For now allow only PAGE_SIZE. A subsequent patch will add support for
high order pages in zero-copy mode.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260223204155.1783580-13-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The formula uses the system page size but does not account
for high order pages.
One way to fix this would be to adapt the formula to take
into account the pool order. This would require calculating it
for every allocation or adding an additional rq struct member to
hold the bias max.
However, the above is not really needed as the driver doesn't
check the bias value. It has other means to calculate the expected
number of fragments based on context.
This patch simply sets the value to the max possible value. A sanity
check is added during queue init phase to avoid having really big pages
from using more fragments than the type can fit.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260223204155.1783580-12-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
An upcoming patch will allow setting the page order for RX
pages to be greater than 0. Make sure that the drop page will
also be allocated with the right size when that happens.
Take extra care when calculating the drop page size to
account for page_shift < PAGE_SHIFT which can happen for xsk.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260223204155.1783580-11-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Instead of unconditionally setting the page_pool to 0, calculate it from
page_shift for MPWQE case.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260223204155.1783580-10-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Adapt the rx path in SHAMPO mode to calculate page size based on
configured page_shift when dealing with payload data.
This is necessary as an upcoming patch will add support for using
different page sizes.
This change has no functional changes.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260223204155.1783580-9-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The channel parameters from struct mlx5_qmgmt_data are
built in mlx5e_queue_mem_alloc() but are not used.
mlx5e_open_channel() builds the channel parameters internally and those
parameters will be the ones that are used when opening the queue.
This patch drops the unused parameters.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260223204155.1783580-8-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The xsk parameter configuration (struct mlx5e_xsk_param) is passed
around many places during parameter calculation. It is used to contain
channel specific information (as opposed to the global info from
struct mlx5e_params).
Upcoming changes will need to push similar channel specific rq
configuration. Instead of adding one more parameter to all these
functions, create a new container structure that has optional rq
specific parameters. The xsk parameter will be the first of such kind.
The new container struct is itself optional. That means that before
checking its members, it has to be checked itself for validity.
This patch has no functional changes.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260223204155.1783580-7-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently the allocation and filling of the xsk channel
parameters was done in mlx5e_open_xsk().
Move this responsibility out of mlx5e_open_xsk() and have
the function take an already filled mlx5e_channel_param.
mlx5e_open_channel() already allocates channel parameters.
The only precaution that is needed is to call
mlx5e_build_xsk_channel_param() before mlx5e_open_xsk().
mlx5e_xsk_enable_locked() now allocates and fills the xsk parameters.
For simplicity, link the xsk parameters in struct mlx5e_channel_params
so that channel params can be passed around.
This patch has no functional changes.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260223204155.1783580-6-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
mlx5e_build_xsk_cparam() is meant to be the alternative
to mlx5e_build_channel_param(). It calculates only the parameters
that it requires using the previously configured mlx5e_xsk_param.
Move this function to params.c to be alongside
mlx5e_build_channel_param() and give it a similar name.
Expose the function as it will be needed by upcoming changes.
This patch has no functional changes.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260223204155.1783580-5-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Calculating max_xsk_wqebbs seems large enough to deserve its own
function. It will make upcoming changes easier.
This patch has no functional changes.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260223204155.1783580-4-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Calculating parameters for striding rq is large enough
to deserve its own function. As the names are also very long
it is very easy to hit on the 80 char limitation every time
a change is made. This is an additional sign that it should
be extracted into its own function.
This patch has no functional change.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260223204155.1783580-3-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This structure is used under different names: rq_param, rq_params,
param, rqp. Refactor the code to use a single name: rq_param.
This patch has no functional change.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260223204155.1783580-2-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use per-regulator supply names in pmic "spacemit,p1" node to specify
each board's power tree topology and match the updated dt-binding.
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Alex Elder <elder@riscstar.com>
Link: https://lore.kernel.org/r/20260206-spacemit-p1-v4-3-8f695d93811e@riscstar.com
Signed-off-by: Yixun Lan <dlan@kernel.org>
The backward compatibility code for the previous incarnation of
platform MSI was removed in e989424899 ("genirq/msi: Remove
platform MSI leftovers"), but the comment about that removal is
still present. Remove it.
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # LX2160ARDB, LS2088ARDB
Tested-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Link: https://lore.kernel.org/r/20260224100936.3752303-7-maz@kernel.org
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Get rid of most of the fsl_mc MSI infrastructure, which is now replaced
by common code.
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # LX2160ARDB, LS2088ARDB
Tested-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Link: https://lore.kernel.org/r/20260224100936.3752303-6-maz@kernel.org
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Add the tiny bit of infrastructure required to use platform MSI
instead of the current hack. This means providing a write_msi_msg
callback, as well as irq domain and devid retrieval helpers.
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # LX2160ARDB, LS2088ARDB
Tested-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Link: https://lore.kernel.org/r/20260224100936.3752303-3-maz@kernel.org
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Only the root device generates MSIs (it is the only one talking to
the ITS), so propagating the domain is pretty pointless. Remove it.
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> # LX2160ARDB, LS2088ARDB
Tested-by: Sascha Bischoff <sascha.bischoff@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Link: https://lore.kernel.org/r/20260224100936.3752303-2-maz@kernel.org
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Guillaume reported crashes via corrupted RCU callback function pointers
during KUnit testing. The crash was traced back to the pidfs rhashtable
conversion which replaced the 24-byte rb_node with an 8-byte rhash_head
in struct pid, shrinking it from 160 to 144 bytes.
struct kthread (without CONFIG_BLK_CGROUP) is also 144 bytes. With
CONFIG_SLAB_MERGE_DEFAULT and SLAB_HWCACHE_ALIGN both round up to
192 bytes and share the same slab cache. struct pid.rcu.func and
struct kthread.affinity_node both sit at offset 0x78.
When a kthread exits via make_task_dead() it bypasses kthread_exit() and
misses the affinity_node cleanup. free_kthread_struct() frees the memory
while the node is still linked into the global kthread_affinity_list. A
subsequent list_del() by another kthread writes through dangling list
pointers into the freed and reused memory, corrupting the pid's
rcu.func pointer.
Instead of patching free_kthread_struct() to handle the missed cleanup,
consolidate all kthread exit paths. Turn kthread_exit() into a macro
that calls do_exit() and add kthread_do_exit() which is called from
do_exit() for any task with PF_KTHREAD set. This guarantees that
kthread-specific cleanup always happens regardless of the exit path -
make_task_dead(), direct do_exit(), or kthread_exit().
Replace __to_kthread() with a new tsk_is_kthread() accessor in the
public header. Export do_exit() since module code using the
kthread_exit() macro now needs it directly.
Reported-by: Guillaume Tucker <gtucker@gtucker.io>
Tested-by: Guillaume Tucker <gtucker@gtucker.io>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: David Gow <davidgow@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/20260224-mittlerweile-besessen-2738831ae7f6@brauner
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 4d13f4304f ("kthread: Implement preferred affinity")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Currently, exfat uses truncate_inode_pages() in exfat_evict_inode().
However, truncate_inode_pages() does not mark the mapping as exiting,
so reclaim may still install shadow entries for the mapping until
the inode teardown completes.
In older kernels like Linux 5.10, if shadow entries are present
at that point,clear_inode() can hit
BUG_ON(inode->i_data.nrexceptional);
To align with VFS eviction semantics and prevent this situation,
switch to truncate_inode_pages_final() in ->evict_inode().
Other filesystems were updated to use truncate_inode_pages_final()
in ->evict_inode() by commit 91b0abe36a ("mm + fs: store shadow
entries in page cache")'.
Signed-off-by: Yang Wen <anmuxixixi@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
The variable name_len is checked to see if it's larger than the macro
NTFS_MAX_NAME_LEN however this condition is impossible because name_len
is of type u8 and NTFS_MAX_NAME_LEN is hardcoded to be 255.
Detected by Smatch:
fs/ntfs/namei.c:1175 __ntfs_link() warn:
impossible condition '(name_len > 255) => (0-255 > 255)'
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
The variable err is confirmed to be 0 and then never reassigned in the
success path. The function then returns with ERR_PTR(err) which just
equals NULL and can be misleading.
Detected by Smatch:
fs/ntfs/namei.c:1091 ntfs_mkdir() warn:
passing zero to 'ERR_PTR'
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Make the top and bottom borders be that same length to
avoid a documentation build error:
Documentation/filesystems/ntfs.rst:159: ERROR: Malformed table.
Bottom border or header rule does not match top border.
(top)
======================= ===================================================
(bottom)
======================= ==================================================
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
The variable ctx can be null and once confirmed to be null in its error
path goes to label err_out. Once there it can be immediately dereferenced
by the function ntfs_attr_put_search_ctx() which has no null pointer check.
Detected by Smatch:
fs/ntfs/ea.c:687 ntfs_new_attr_flags() error:
we previously assumed 'ctx' could be null (see line 577)
Add null pointer check before running ntfs_attr_put_search_ctx() in
error path.
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Most symbols for the clock descriptions (arrays) don't have a cmu_
prefix and all symbols have a _clks suffix where appropriate.
Update the few outliers to also fall into this same scheme for
consistency.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260205-clk-gs101-symbol-names-v1-1-a7d9a7a4d108@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
In a typical system using the Samsung S2MPG10 PMIC, an S2MPG11 is used
as a sub-PMIC.
The interface for both is the ACPM firmware protocol, so update the
binding to allow the relevant node and update the example here to
describe the connection for both PMICs.
Since we have two PMICs here, but can not use the 'reg' property (as
the addressing is based on software, i.e. the ACPM firmware), the node
names reflect that with their respective suffix. The existing 'pmic'
therefore becomes deprecated in favour of 'pmic-1'.
While at it, update the example.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260210-s2mpg1x-regulators-v8-1-c429d709c0e0@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
