Replace drm_of_find_panel_or_bridge() with the newer
devm_drm_of_get_bridge() helper which simplifies the code by:
- Automatically handling both panel and bridge cases internally
- Managing the panel-to-bridge conversion when needed
- Using devres for resource management, eliminating manual cleanup
This removes the need for explicit panel-to-bridge conversion via
devm_drm_panel_bridge_add_typed() and the associated error handling path.
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-20-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Replace dev_* logging calls with their DRM equivalents.
This aligns with the DRM subsystem's logging infrastructure and provides
better integration with DRM debugging mechanisms. The drm_* helpers
automatically include device information and integrate with DRM's
debug category filtering.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-19-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Convert the tilcdc driver to use DRM managed resources (drmm_* APIs)
to eliminate resource lifetime issues, particularly in probe deferral
scenarios.
This conversion addresses potential use-after-free bugs by ensuring
proper cleanup ordering through the DRM managed resource framework.
The changes include:
- Replace drm_crtc_init_with_planes() with drmm_crtc_alloc_with_planes()
- Replace drm_universal_plane_init() with drmm_universal_plane_alloc()
- Replace drm_simple_encoder_init() with drmm_simple_encoder_alloc()
- Remove manual cleanup in tilcdc_crtc_destroy() and error paths
- Remove drm_encoder_cleanup() from encoder error handling paths
- Use drmm_add_action_or_reset() for remaining cleanup operations
This approach is recommended by the DRM subsystem for improved resource
lifetime management and is particularly important for drivers that may
experience probe deferral.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-18-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The DRM core documentation recommends against using dev_private:
"Instead of using this pointer it is recommended that drivers use
embed the struct &drm_device in their larger per-device structure."
This patch refactors the tilcdc driver to follow this recommendation
by embedding struct drm_device within struct tilcdc_drm_private and
replacing all dev->dev_private accesses with the ddev_to_tilcdc_priv()
helper macro that uses container_of().
This change aligns the driver with modern DRM best practices.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-17-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Refactor the driver initialization to use modern DRM managed resource
APIs, simplifying the code.
The tilcdc_init and tilcdc_fini wrapper functions are removed since they
served no purpose after the component framework was eliminated. Their
logic is integrated directly into probe and remove.
Key changes:
- Use devm_drm_dev_alloc() instead of drm_dev_alloc().
- Use drmm_mode_config_init() instead of drm_mode_config_init().
- Align the remove path with the probe error path to ensure consistent
cleanup ordering in both success and failure cases.
- Adjust platform_set_drvdata() to store the private structure instead
of the drm_device, matching the new allocation pattern.
These changes reduce error-prone code while maintaining the same
functional behavior.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-16-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Move tilcdc_init/fini functions adjacent to the probe and remove functions
in preparation for cleanup and modernization. This improves readability
for subsequent commits that will refactor these functions.
No functional changes, only code reorganization.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-15-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Use the drm_module_platform_driver() helper macro to simplify driver
registration. This macro handles both the platform driver registration
and the drm_firmware_drivers_only() check, making the custom init/exit
functions unnecessary.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-14-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The tilcdc driver previously supported a sub-module system where
external display drivers (panels, encoders) could register themselves
through tilcdc_module_init() and be automatically initialized through
a module list. This infrastructure became unused after the component
framework support and panel driver was removed.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-13-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The tilcdc_external module describes the encoder part of the tilcdc
driver. Rename it to tilcdc_encoder for better clarity and to make
the naming more consistent with DRM subsystem conventions, where
encoder-related files typically use "encoder" in their names.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-12-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Remove the "external_" prefix from encoder and connector members in the
tilcdc driver. These are internal driver structures and the "external"
naming is misleading. The simpler names better reflect that these are
the primary encoder and connector managed by this driver.
Also rename tilcdc_attach_external_device() to tilcdc_encoder_create()
for consistency and to better describe the function's purpose.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-11-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The num_encoders/encoders and num_connectors/connectors arrays in
tilcdc_drm_private are never populated or used by the driver.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-10-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Remove the tilcdc_panel_info structure and its associated helper
function as the structure contains only redundant or unused parameters.
Most panel configuration parameters in tilcdc_panel_info are either:
- Already represented by existing DRM mode flags (invert_pxl_clk,
sync_edge via DRM_BUS_FLAG_*), or
- Set to identical values across all instances (panel_info_default),
making them effectively constants
The removed fifo_th field is already handled by priv->fifo_th when set.
Other removed fields (tft_alt_mode, raster_order) were always set to 0
in the only instance (panel_info_default) and thus had no effect.
This simplifies the code by eliminating unnecessary abstraction while
preserving all functional behavior.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-8-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The tilcdc driver previously used the component framework to bind
external encoder subdrivers (specifically the TDA998x HDMI encoder).
With the removal of these subdrivers in previous commits, the component
framework is no longer needed.
This commit removes all component framework infrastructure including:
- Component master operations and bind/unbind callbacks
- The is_componentized flag and conditional code paths
- tilcdc_get_external_components() and tilcdc_add_component_encoder()
- TDA998x-specific panel configuration
The driver now uses a simplified initialization path that directly
attaches external devices via the DRM bridge API, eliminating the
complexity of dual code paths for componentized vs non-componentized
configurations.
This cleanup removes approximately 140 lines of code and makes the
driver initialization flow more straightforward.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-7-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The tilcdc panel subdriver is a legacy, non-standard driver that has been
replaced by the standard panel-dpi driver and panel-simple infrastructure.
With the device tree bindings removed and all in-tree users migrated to
use panel-dpi, this driver no longer has any associated device tree
bindings or users. The panel-dpi driver combined with DRM bus flags
provides equivalent functionality in a standard way that is compatible
with the broader DRM panel ecosystem.
This removal eliminates 400+ lines of redundant code and completes the
migration to standard panel handling.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-6-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
To maintain backward compatibility while removing the deprecated
tilcdc_panel driver, add a tilcdc_panel_legacy subdriver that converts
the legacy "ti,tilcdc,panel" devicetree binding to the standard
panel-dpi binding at early boot.
The conversion uses an embedded device tree overlay that is applied and
modified during subsys_initcall. The process:
- Apply embedded overlay to create a tilcdc-panel-dpi node with
port/endpoint connections to the LCDC
- Copy all properties from the legacy panel node to the new
tilcdc-panel-dpi node
- Copy display-timings from the legacy panel
- Convert legacy panel-info properties (invert-pxl-clk, sync-edge) to
standard display timing properties (pixelclk-active, syncclk-active)
- Disable the legacy panel by removing its compatible property to
prevent the deprecated driver from binding
The result is a standard tilcdc-panel-dpi node with proper endpoints and
timing properties, allowing the DRM panel infrastructure to work with
legacy devicetrees without modification.
Other legacy panel-info properties are not migrated as they consistently
use default values across all mainline devicetrees and can be hardcoded
in the tilcdc driver.
This feature is optional via CONFIG_DRM_TILCDC_PANEL_LEGACY and should
only be enabled for systems with legacy devicetrees containing
"ti,tilcdc,panel" nodes.
Suggested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/all/1d9a9269-bfda-4d43-938b-2df6b82b9369@ideasonboard.com/
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-5-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Migrate CRTC mode configuration to use standard DRM bus flags in
preparation for removing the tilcdc_panel driver and its custom
tilcdc_panel_info structure.
Add support for DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE and
DRM_BUS_FLAG_SYNC_DRIVE_NEGEDGE flags to control pixel clock and sync
signal edge polarity, while maintaining backward compatibility with the
existing tilcdc panel info structure.
Simplify several hardware parameters by setting them to fixed defaults
based on common usage across existing device trees:
- DMA burst size: 16 (previously configurable via switch statement)
- AC bias frequency: 255 (previously panel-specific)
- FIFO DMA request delay: 128 (previously panel-specific)
These parameters show no variation in real-world usage, so hardcoding
them simplifies the driver without losing functionality.
Preserve FIFO threshold configurability by detecting the SoC type, as
this parameter varies between AM33xx (8) and DA850 (16) platforms.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-4-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The tilcdc hardware does not generate VESA-compliant sync signals. It
aligns the vertical sync (VS) on the second edge of the horizontal sync
(HS) instead of the first edge. To compensate for this hardware
behavior, the driver applies a timing adjustment in mode_fixup().
Previously, this adjustment was conditional based on the simulate_vesa_sync
flag, which was only set when using external encoders. This appears
problematic because:
1. The timing adjustment seems needed for the hardware behavior regardless
of whether an external encoder is used
2. The external encoder infrastructure is driver-specific and being
removed due to design issues
3. Boards using tilcdc without bridges (e.g., am335x-evm, am335x-evmsk)
may not be getting the necessary timing adjustments
Remove the simulate_vesa_sync flag and apply the VESA sync timing
adjustment unconditionally, ensuring consistent behavior across all
configurations. While it's unclear if the previous conditional behavior
was causing actual issues, the unconditional adjustment better reflects
the hardware's characteristics.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-3-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Mark the ti,tilcdc,panel binding as deprecated in the documentation.
This legacy binding should no longer be used for new designs. Users
should migrate to the standard DRM panel bindings instead.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-2-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Convert the device tree binding documentation for tilcdc
from plain text to DT binding schema.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Kory Maincent (TI.com) <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260123-feature_tilcdc-v5-1-5a44d2aa3f6f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
For common cases (HZ=100, 250 or 1000), these helpers are at most one
multiply, so there is no point calling a tiny function.
Keep them out of line for HZ=300 and others.
This saves cycles in TCP fast path, among other things.
$ scripts/bloat-o-meter -t vmlinux.old vmlinux.new
add/remove: 0/8 grow/shrink: 25/89 up/down: 530/-3474 (-2944)
...
nla_put_msecs 193 - -193
message_stats_print 2131 920 -1211
Total: Before=25365208, After=25362264, chg -0.01%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260210170226.57209-1-edumazet@google.com
- Implement masked user access
- Add support for internal only per-CPU instructions and inline the bpf_get_smp_processor_id() and bpf_get_current_task()
- Fix pSeries MSI-X allocation failure when quota is exceeded
- Fix recursive pci_lock_rescan_remove locking in EEH event handling
- Support tailcalls with subprogs & BPF exceptions on 64bit
- Extend "trusted" keys to support the PowerVM Key Wrapping Module (PKWM)
Thanks to: Abhishek Dubey, Christophe Leroy, Gaurav Batra, Guangshuo Li, Jarkko
Sakkinen, Mahesh Salgaonkar, Mimi Zohar, Miquel Sabaté Solà, Nam Cao, Narayana
Murty N, Nayna Jain, Nilay Shroff, Puranjay Mohan, Saket Kumar Bhaskar, Sourabh
Jain, Srish Srinivasan, Venkat Rao Bagalkote,
-----BEGIN PGP SIGNATURE-----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=zJoL
-----END PGP SIGNATURE-----
Merge tag 'powerpc-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates for 7.0
- Implement masked user access
- Add bpf support for internal only per-CPU instructions and inline the
bpf_get_smp_processor_id() and bpf_get_current_task() functions
- Fix pSeries MSI-X allocation failure when quota is exceeded
- Fix recursive pci_lock_rescan_remove locking in EEH event handling
- Support tailcalls with subprogs & BPF exceptions on 64bit
- Extend "trusted" keys to support the PowerVM Key Wrapping Module
(PKWM)
Thanks to Abhishek Dubey, Christophe Leroy, Gaurav Batra, Guangshuo Li,
Jarkko Sakkinen, Mahesh Salgaonkar, Mimi Zohar, Miquel Sabaté Solà, Nam
Cao, Narayana Murty N, Nayna Jain, Nilay Shroff, Puranjay Mohan, Saket
Kumar Bhaskar, Sourabh Jain, Srish Srinivasan, and Venkat Rao Bagalkote.
* tag 'powerpc-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (27 commits)
powerpc/pseries: plpks: export plpks_wrapping_is_supported
docs: trusted-encryped: add PKWM as a new trust source
keys/trusted_keys: establish PKWM as a trusted source
pseries/plpks: add HCALLs for PowerVM Key Wrapping Module
pseries/plpks: expose PowerVM wrapping features via the sysfs
powerpc/pseries: move the PLPKS config inside its own sysfs directory
pseries/plpks: fix kernel-doc comment inconsistencies
powerpc/smp: Add check for kcalloc() failure in parse_thread_groups()
powerpc: kgdb: Remove OUTBUFMAX constant
powerpc64/bpf: Additional NVR handling for bpf_throw
powerpc64/bpf: Support exceptions
powerpc64/bpf: Add arch_bpf_stack_walk() for BPF JIT
powerpc64/bpf: Avoid tailcall restore from trampoline
powerpc64/bpf: Support tailcalls with subprogs
powerpc64/bpf: Moving tail_call_cnt to bottom of frame
powerpc/eeh: fix recursive pci_lock_rescan_remove locking in EEH event handling
powerpc/pseries: Fix MSI-X allocation failure when quota is exceeded
powerpc/iommu: bypass DMA APIs for coherent allocations for pre-mapped memory
powerpc64/bpf: Inline bpf_get_smp_processor_id() and bpf_get_current_task/_btf()
powerpc64/bpf: Support internal-only MOV instruction to resolve per-CPU addrs
...
- Fix device reference leak in error path
- Check if system provides a 64-bit free running platform counter
- Minor fixes in debug code
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCaYuPEgAKCRD3ErUQojoP
X3z9AQCfvU14/vkMab/iXt7mn7yf1CZbvo7cczAMA8XTRvLNUQD7BL+6tHqSxwCh
rZax1BQR8TKArZYWkdOADtldog0plQ4=
=NhTL
-----END PGP SIGNATURE-----
Merge tag 'parisc-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
- Fix device reference leak in error path
- Check if system provides a 64-bit free running platform counter
- Minor fixes in debug code
* tag 'parisc-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: lba_pci: Add debug code to show IO and PA ranges
parisc: Detect 64-bit free running platform counter
parisc: Fix minor printk issues in iosapic debug code
parisc: Enhance debug code for PAT firmware
parisc: Add PDC PAT call to get free running 64-bit counter
parisc: Fix module path output in qemu tables
parisc: Export model name for MPE/ix
parisc: Prevent interrupts during reboot
parisc: Print hardware IDs as 4 digit hex strings
parisc: kernel: replace kfree() with put_device() in create_tree_node()
There are a handful of new SoCs this time, all of these are
more or less related to chips in a wider family:
- SpacemiT Key Stone K3 is an 8-core risc-v chip, and the first
widely available RVA23 implementation. Note that this is
entirely unrelated with the similarly named Texas Instruments
K3 chip family that follwed the TI Keystone2 SoC.
- The Realtek Kent family of SoCs contains three chip models
rtd1501s, rtd1861b and rtd1920s, and is related to their earlier
Set-top-box and NAS products such as rtd1619, but is built
on newer Arm Cortex-A78 cores.
- The Qualcomm Milos family includes the Snapdragon 7s Gen 3
(SM7635) mobile phone SoC built around Armv9 Kryo cores of the Arm
Cortex-A720 generation. This one is used in the Fairphone Gen 6
- Qualcomm Kaanapali is a new SoC based around eight high
performance Oryon CPU cores
- NXP i.MX8QP and i.MX952 are both feature reduced versions of
chips we already support, i.e. the i.MX8QM and i.MX952, with
fewer CPU cores and I/O interfaces.
As part of a cleanup, a number of SoC specific devicetree files got
removed because they did not have a single board using the .dtsi files
and they were never compile tested as a result: Samsung s3c6400,
ST spear320s, ST stm32mp21xc/stm32mp23xc/stm32mp25xc, Renesas
r8a779m0/r8a779m2/r8a779m4/r8a779m6/r8a779m7/r8a779m8/r8a779mb/
r9a07g044c1/r9a07g044l1/r9a07g054l1/r9a09g047e37, and TI am3703/am3715.
All of these could be restored easily if a new board gets merged.
Broadcom/Cavium/Marvell ThunderX2 gets removed along with its only
machine, as all remaining users are assumed to be using ACPI
based firmware.
A relatively small number of 43 boards get added this time, and
almost all of them for arm64. Aside from the reference boards for
the newly added SoCs, this includes:
- Three server boards use 32-bit ASpeed BMCs
- One more reference board for 32-bit Microchip LAN9668
- 64-bit Arm single-board computers based on Amlogic s905y4,
CIX sky1, NXP ls1028a/imx8mn/imx8mp/imx91/imx93/imx95,
Qualcomm qcs6490/qrb2210 and Rockchip rk3568/rk3588s
- Carrier board for SOMs using Intel agilex5, Marvell Armada 7020,
NXP iMX8QP, Mediatek mt8370/mt8390 and rockchip rk3588
- Two mobile phones using Snapdragon 845
- A gaming device and a NAS box, both based on Rockchips rk356x
On top of the newly added boards and SoCs, there is a lot of
background activity going into cleanups, in particular towards
getting a warning-free dtc build, and the usual work on adding
support for more hardware on the previously added machines.
-----BEGIN PGP SIGNATURE-----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=IK23
-----END PGP SIGNATURE-----
Merge tag 'soc-dt-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC devicetree updates from Arnd Bergmann:
"There are a handful of new SoCs this time, all of these are more or
less related to chips in a wider family:
- SpacemiT Key Stone K3 is an 8-core risc-v chip, and the first
widely available RVA23 implementation. Note that this is entirely
unrelated with the similarly named Texas Instruments K3 chip family
that follwed the TI Keystone2 SoC.
- The Realtek Kent family of SoCs contains three chip models
rtd1501s, rtd1861b and rtd1920s, and is related to their earlier
Set-top-box and NAS products such as rtd1619, but is built on newer
Arm Cortex-A78 cores.
- The Qualcomm Milos family includes the Snapdragon 7s Gen 3 (SM7635)
mobile phone SoC built around Armv9 Kryo cores of the Arm
Cortex-A720 generation. This one is used in the Fairphone Gen 6
- Qualcomm Kaanapali is a new SoC based around eight high performance
Oryon CPU cores
- NXP i.MX8QP and i.MX952 are both feature reduced versions of chips
we already support, i.e. the i.MX8QM and i.MX952, with fewer CPU
cores and I/O interfaces.
As part of a cleanup, a number of SoC specific devicetree files got
removed because they did not have a single board using the .dtsi files
and they were never compile tested as a result: Samsung s3c6400, ST
spear320s, ST stm32mp21xc/stm32mp23xc/stm32mp25xc, Renesas
r8a779m0/r8a779m2/r8a779m4/r8a779m6/r8a779m7/r8a779m8/r8a779mb/
r9a07g044c1/r9a07g044l1/r9a07g054l1/r9a09g047e37, and TI
am3703/am3715. All of these could be restored easily if a new board
gets merged.
Broadcom/Cavium/Marvell ThunderX2 gets removed along with its only
machine, as all remaining users are assumed to be using ACPI based
firmware.
A relatively small number of 43 boards get added this time, and almost
all of them for arm64. Aside from the reference boards for the newly
added SoCs, this includes:
- Three server boards use 32-bit ASpeed BMCs
- One more reference board for 32-bit Microchip LAN9668
- 64-bit Arm single-board computers based on Amlogic s905y4, CIX
sky1, NXP ls1028a/imx8mn/imx8mp/imx91/imx93/imx95, Qualcomm
qcs6490/qrb2210 and Rockchip rk3568/rk3588s
- Carrier board for SOMs using Intel agilex5, Marvell Armada 7020,
NXP iMX8QP, Mediatek mt8370/mt8390 and rockchip rk3588
- Two mobile phones using Snapdragon 845
- A gaming device and a NAS box, both based on Rockchips rk356x
On top of the newly added boards and SoCs, there is a lot of
background activity going into cleanups, in particular towards getting
a warning-free dtc build, and the usual work on adding support for
more hardware on the previously added machines"
* tag 'soc-dt-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (757 commits)
dt-bindings: intel: Add Agilex eMMC support
arm64: dts: socfpga: agilex: add emmc support
arm64: dts: intel: agilex5: Add simple-bus node on top of dma controller node
ARM: dts: socfpga: fix dtbs_check warning for fpga-region
ARM: dts: socfpga: add #address-cells and #size-cells for sram node
dt-bindings: altera: document syscon as fallback for sys-mgr
arm64: dts: altera: Use lowercase hex
dt-bindings: arm: altera: combine Intel's SoCFPGA into altera.yaml
arm64: dts: socfpga: agilex5: Add IOMMUS property for ethernet nodes
arm64: dts: socfpga: agilex5: add support for modular board
dt-bindings: intel: Add Agilex5 SoCFPGA modular board
arm64: dts: socfpga: agilex5: Add dma-coherent property
arm64: dts: realtek: Add Kent SoC and EVB device trees
dt-bindings: arm: realtek: Add Kent Soc family compatibles
ARM: dts: samsung: Drop s3c6400.dtsi
ARM: dts: nuvoton: Minor whitespace cleanup
MAINTAINERS: Add Falcon DB
arm64: dts: a7k: add COM Express boards
ARM: dts: microchip: Drop usb_a9g20-dab-mmx.dtsi
arm64: dts: rockchip: Fix rk3588 PCIe range mappings
...
Running ethtool repeatedly with a transceiver unknown to the driver or
firmware will cause the driver to spam the kernel logs with "unknown
xcvr type" messages which can distract from real issues; and this isn't
interesting information outside of debugging. Fix this by rate limiting
the output so that there are still notifications but not so many that
they flood the log.
Using dev_dbg_once() would reduce the number of messages further, but
this would miss the case where a different unknown transceiver type is
plugged in, and its status is requested.
Fixes: 4d03e00a21 ("ionic: Add initial ethtool support")
Signed-off-by: Eric Joyner <eric.joyner@amd.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Link: https://patch.msgid.link/20260206224651.1491-1-eric.joyner@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
ipv6: tcp: no longer rebuild fl6 at each transmit
TCP v6 spends a good amount of time rebuilding a fresh fl6 at each
transmit in inet6_csk_xmit()/inet6_csk_route_socket().
TCP v4 caches the information in inet->cork.fl.u.ip4 instead.
This series changes TCP v6 to behave the same, saving cpu cycles
and reducing cache line misses and stack use.
====================
Link: https://patch.msgid.link/20260206173426.1638518-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After prior patches, inet6_csk_xmit() can reuse inet->cork.fl.u.ip6
if __sk_dst_check() returns a valid dst.
Otherwise call inet6_csk_route_socket() to refresh inet->cork.fl.u.ip6
content and get a new dst.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260206173426.1638518-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As explained in commit 85d05e2817 ("ipv6: change inet6_sk_rebuild_header()
to use inet->cork.fl.u.ip6"):
TCP v6 spends a good amount of time rebuilding a fresh fl6 at each
transmit in inet6_csk_xmit()/inet6_csk_route_socket().
TCP v4 caches the information in inet->cork.fl.u.ip4 instead.
After this patch, passive TCP ipv6 flows have correctly initialized
inet->cork.fl.u.ip6 structure.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260206173426.1638518-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of using private @fl6 and @final variables
use respectively inet->cork.fl.u.ip6 and np->final.
As explained in commit 85d05e2817 ("ipv6: change inet6_sk_rebuild_header()
to use inet->cork.fl.u.ip6"):
TCP v6 spends a good amount of time rebuilding a fresh fl6 at each
transmit in inet6_csk_xmit()/inet6_csk_route_socket().
TCP v4 caches the information in inet->cork.fl.u.ip4 instead.
After this patch, active TCP ipv6 flows have correctly initialized
inet->cork.fl.u.ip6 structure.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260206173426.1638518-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert inet6_csk_route_socket() to use np->final instead of an
automatic variable to get rid of a stack canary.
Convert inet6_csk_xmit() and inet6_csk_update_pmtu() to use
inet->cork.fl.u.ip6 instead of @fl6 automatic variable.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260206173426.1638518-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Get rid of @fl6 and &final variables in ip6_datagram_dst_update().
Use instead inet->cork.fl.u.ip6 and np->final so that a stack canary
is no longer needed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260206173426.1638518-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of using an automatic variable, use np->final
to get rid of the stack canary in inet6_sk_rebuild_header().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260206173426.1638518-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit b409a7f717 ("ipv6: colocate inet6_cork in
inet_cork_full") we have room in ipv6_pinfo to hold daddr/final
in case they need to be populated in fl6_update_dst() calls.
This will allow stack canary removal in IPv6 tx fast paths.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260206173426.1638518-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are are a number of to firmware drivers, in particular the TEE
subsystem:
- a bus callback for TEE firmware that device drivers can register to
- sysfs support for tee firmware information
- minor updates to platform specific TEE drivers for AMD, NXP, Qualcomm
and the generic optee driver
- ARM SCMI firmware refactoring to improve the protocol discover
among other fixes and cleanups
- ARM FF-A firmware interoperability improvements
The reset controller and memory controller subsystems gain support for
additional hardware platforms from Mediatek, Renesas, NXP, Canaan and
SpacemiT.
Most of the other changes are for random drivers/soc code. Among
a number of cleanups and newly added hardware support, including:
- Mediatek MT8196 DVFS power management and mailbox support
- Qualcomm SCM firmware and MDT loader refactoring, as part of
the new Glymur platform support.
- NXP i.MX9 System Manager firmware support for accessing the
syslog
- Minor updates for TI, Renesas, Samsung, Apple, Marvell and AMD
SoCs.
-----BEGIN PGP SIGNATURE-----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=rUYH
-----END PGP SIGNATURE-----
Merge tag 'soc-drivers-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"There are are a number of to firmware drivers, in particular the TEE
subsystem:
- a bus callback for TEE firmware that device drivers can register to
- sysfs support for tee firmware information
- minor updates to platform specific TEE drivers for AMD, NXP,
Qualcomm and the generic optee driver
- ARM SCMI firmware refactoring to improve the protocol discover
among other fixes and cleanups
- ARM FF-A firmware interoperability improvements
The reset controller and memory controller subsystems gain support for
additional hardware platforms from Mediatek, Renesas, NXP, Canaan and
SpacemiT.
Most of the other changes are for random drivers/soc code. Among a
number of cleanups and newly added hardware support, including:
- Mediatek MT8196 DVFS power management and mailbox support
- Qualcomm SCM firmware and MDT loader refactoring, as part of the
new Glymur platform support.
- NXP i.MX9 System Manager firmware support for accessing the syslog
- Minor updates for TI, Renesas, Samsung, Apple, Marvell and AMD
SoCs"
* tag 'soc-drivers-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (171 commits)
bus: fsl-mc: fix an error handling in fsl_mc_device_add()
reset: spacemit: Add SpacemiT K3 reset driver
reset: spacemit: Extract common K1 reset code
reset: Create subdirectory for SpacemiT drivers
dt-bindings: soc: spacemit: Add K3 reset support and IDs
reset: canaan: k230: drop OF dependency and enable by default
reset: rzg2l-usbphy-ctrl: Add suspend/resume support
reset: rzg2l-usbphy-ctrl: Propagate the return value of regmap_field_update_bits()
reset: gpio: check the return value of gpiod_set_value_cansleep()
reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV
reset: imx8mp-audiomix: Extend the driver usage
reset: imx8mp-audiomix: Switch to using regmap API
reset: imx8mp-audiomix: Drop unneeded macros
soc: fsl: qe: qe_ports_ic: Consolidate chained IRQ handler install/remove
soc: mediatek: mtk-cmdq: Add mminfra_offset adjustment for DRAM addresses
soc: mediatek: mtk-cmdq: Extend cmdq_pkt_write API for SoCs without subsys ID
soc: mediatek: mtk-cmdq: Add pa_base parsing for hardware without subsys ID support
soc: mediatek: mtk-cmdq: Add cmdq_get_mbox_priv() in cmdq_pkt_create()
mailbox: mtk-cmdq: Add driver data to support for MT8196
mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction
...
These are the usual updates, enabling mode newly merged device drivers for
various Arm and RISC-V based platforms in the defconfig files. The Renesas
and NXP defconfig files also get a refresh for modified Kconfig options.
-----BEGIN PGP SIGNATURE-----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=tlG5
-----END PGP SIGNATURE-----
Merge tag 'soc-defconfig-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC defconfig updates from Arnd Bergmann:
"These are the usual updates, enabling mode newly merged device drivers
for various Arm and RISC-V based platforms in the defconfig files.
The Renesas and NXP defconfig files also get a refresh for modified
Kconfig options"
* tag 'soc-defconfig-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
riscv: defconfig: spacemit: k3: enable clock support
ARM: defconfig: turn off CONFIG_EXPERT
ARM: defconfig: move entries
arm64: defconfig: Enable configurations for Kontron SMARC-sAM67
ARM: imx_v4_v5_defconfig: update for v6.19-rc1
arm64: defconfig: Enable Apple Silicon drivers
arm64: select APPLE_PMGR_PWRSTATE for ARCH_APPLE
arm64: defconfig: Enable Mediatek HDMIv2 driver
ARM: shmobile: defconfig: Refresh for v6.19-rc1
arm64: defconfig: Enable PCIe for the Renesas RZ/G3S SoC
arm64: defconfig: Enable RZ/G3E USB3 PHY driver
arm64: defconfig: Enable EC drivers for Qualcomm-based laptops
arm64: defconfig: Enable options for Qualcomm Milos SoC
ARM: imx_v6_v7_defconfig: enable EPD regulator needed for Kobo Clara 2e
ARM: imx_v6_v7_defconfig: Configure CONFIG_SND_SOC_FSL_ASOC_CARD as module
ARM: multi_v7_defconfig: enable DA9052 and MC13XXX
arm64: defconfig: enable clocks, interconnect and pinctrl for Qualcomm Kaanapali
arm64: defconfig: Drop duplicate CONFIG_OMAP_USB2 entry
arm64: defconfig: Enable missing AMD/Xilinx drivers
A series from Thomas Weißschuh cleans up the UAPI header files to no
longer contain any references to Kconfig symbols, as these make no sense
in userspace. The build-time check for these was originally added by Sam
Ravnborg in linux-2.6.28, and a later version started warning for all
newly added CONFIG_* checks here but kept a list of known exceptions. With
the last exceptions gone from that list, the warning is now unconditional
in 'make headers_install'.
John Garry contributed a cleanup of cpumask_of_node().
-----BEGIN PGP SIGNATURE-----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=A57a
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic header updates from Arnd Bergmann:
"A series from Thomas Weißschuh cleans up the UAPI header files to no
longer contain any references to Kconfig symbols, as these make no
sense in userspace.
The build-time check for these was originally added by Sam Ravnborg in
linux-2.6.28, and a later version started warning for all newly added
CONFIG_* checks here but kept a list of known exceptions. With the
last exceptions gone from that list, the warning is now unconditional
in 'make headers_install'.
John Garry contributed a cleanup of cpumask_of_node()"
* tag 'asm-generic-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
scripts: headers_install.sh: Remove config leak ignore machinery
x86/uapi: Stop leaking kconfig references to userspace
nios2: uapi: Remove custom asm/swab.h from UAPI
ARM: uapi: Drop PSR_ENDSTATE
ARC: Always use SWAPE instructions for __arch_swab32()
include/asm-generic/topology.h: Remove unused definition of cpumask_of_node()
-----BEGIN PGP SIGNATURE-----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=wU6p
-----END PGP SIGNATURE-----
Merge tag 'nf-next-26-02-06' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Florian Westphal says:
====================
netfilter: updates for net-next
The following patchset contains Netfilter updates for *net-next*:
1) Fix net-next-only use-after-free bug in nf_tables rbtree set:
Expired elements cannot be released right away after unlink anymore
because there is no guarantee that the binary-search blob is going to
be updated. Spotted by syzkaller.
2) Fix esoteric bug in nf_queue with udp fraglist gro, broken since
6.11. Patch 3 adds extends the nfqueue selftest for this.
4) Use dedicated slab for flowtable entries, currently the -512 cache
is used, which is wasteful. From Qingfang Deng.
5) Recent net-next update extended existing test for ip6ip6 tunnels, add
the required /config entry. Test still passed by accident because the
previous tests network setup gets re-used, so also update the test so
it will fail in case the ip6ip6 tunnel interface cannot be added.
6) Fix 'nft get element mytable myset { 1.2.3.4 }' on big endian
platforms, this was broken since code was added in v5.1.
7) Fix nf_tables counter reset support on 32bit platforms, where counter
reset may cause huge values to appear due to wraparound.
Broken since reset feature was added in v6.11. From Anders Grahn.
8-11) update nf_tables rbtree set type to detect partial
operlaps. This will eventually speed up nftables userspace: at this
time userspace does a netlink dump of the set content which slows down
incremental updates on interval sets. From Pablo Neira Ayuso.
* tag 'nf-next-26-02-06' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next:
netfilter: nft_set_rbtree: validate open interval overlap
netfilter: nft_set_rbtree: validate element belonging to interval
netfilter: nft_set_rbtree: check for partial overlaps in anonymous sets
netfilter: nft_set_rbtree: fix bogus EEXIST with NLM_F_CREATE with null interval
netfilter: nft_counter: fix reset of counters on 32bit archs
netfilter: nft_set_hash: fix get operation on big endian
selftests: netfilter: add IPV6_TUNNEL to config
netfilter: flowtable: dedicated slab for flow entry
selftests: netfilter: nft_queue.sh: add udp fraglist gro test case
netfilter: nfnetlink_queue: do shared-unconfirmed check before segmentation
netfilter: nft_set_rbtree: don't gc elements on insert
====================
Link: https://patch.msgid.link/20260206153048.17570-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add cleanup for failure paths in qcom_ethqos_serdes_powerup(). This
was missing calling phy_exit() and phy_power_off() at appropriate
failure points.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Tested-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Reviewed-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Link: https://patch.msgid.link/E1voPUH-000000083ji-25FH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mentioned struct has an hole and uses unnecessary wide type to
store MAC length and indexes of very small arrays.
It's also embedded into the skb_extensions, and the latter, due
to recent CAN changes, may exceeds the 192 bytes mark (3 cachelines
on x86_64 arch) on some reasonable configurations.
Reordering and the sec_path fields, shrinking xfrm_offload.orig_mac_len
to 16 bits and xfrm_offload.{len,olen,verified_cnt} to u8, we can save
16 bytes and keep skb_extensions size under control.
Before:
struct sec_path {
int len;
int olen;
int verified_cnt;
/* XXX 4 bytes hole, try to pack */$
struct xfrm_state * xvec[6];
struct xfrm_offload ovec[1];
/* size: 88, cachelines: 2, members: 5 */
/* sum members: 84, holes: 1, sum holes: 4 */
/* last cacheline: 24 bytes */
};
After:
struct sec_path {
struct xfrm_state * xvec[6];
struct xfrm_offload ovec[1];
/* typedef u8 -> __u8 */ unsigned char len;
/* typedef u8 -> __u8 */ unsigned char olen;
/* typedef u8 -> __u8 */ unsigned char verified_cnt;
/* size: 72, cachelines: 2, members: 5 */
/* padding: 1 */
/* last cacheline: 8 bytes */
};
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Steffen Klassert <steffen.klassert@secunet.com>
Link: https://patch.msgid.link/83846bd2e3fa08899bd0162e41bfadfec95e82ef.1770398071.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Michael Chan says:
====================
bnxt_en: Add RSS context resource check
Add missing logic to check that we have enough RSS contexts. This
will make the recent change to increase the use of RSS contexts for
a larger RSS indirection table more complete.
====================
Link: https://patch.msgid.link/20260207235118.1987301-1-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bnxt_need_reserve_rings() checks all resources except HW RSS contexts
to determine if a new reservation is required. For completeness, add
the check for HW RSS contexts. This makes the code more complete after
the recent commit to increase the number of RSS contexts for a larger
RSS indirection table:
Fixes: 51b9d3f948 ("bnxt_en: Use a larger RSS indirection table on P5_PLUS chips")
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260207235118.1987301-3-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bnxt_need_reserve_rings() checks 6 ring resources against the reserved
values to determine if a new reservation is needed. Factor out the code
to collect the total resources into a new helper function
bnxt_get_total_resources() to make the code cleaner and easier to read.
Instead of individual scalar variables, use the struct bnxt_hw_rings to
hold all the ring resources. Using the struct, hwr.cp replaces the nq
variable and the chip specific hwr.cp_p5 replaces cp on newer chips.
There is no change in behavior. This will make it easier to check the
RSS context resource in the next patch.
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Joe Damato <joe@dama.to>
Link: https://patch.msgid.link/20260207235118.1987301-2-michael.chan@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 93d73005bf ("x86/entry/vdso: Rename vdso_image_* to
vdso*_image") updated the vdso .gitignore file with the new filenames,
which is certainly not incorrect.
However, while adding new generated names is obviously the right thing
to do, you should *not* immediately remove the old filenames from the
.gitignore file when things move around or get renamed, because people
still have those old generated files in their build trees - and they
haven't suddenly become valid files to commit to the repository just
because they were moved or renamed.
While it's mostly just a slight visual nuisance for 'git status' that
can be fixed up with a clean build tree, it can become more serious than
that: see for example commit 04a3389b35 ("Remove stale generated
'genheaders' file").
That commit removed up a stale generated file that had been carelessly
committed by a kernel developer because it wasn't properly ignored any
more and thus showed up as a new file in their tree.
Fixes: 93d73005bf ("x86/entry/vdso: Rename vdso_image_* to vdso*_image")
Cc: Peter Anvin <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Future extensions with psock will override their own sk->sk_write_space
callback. This patch ensures that the overridden sk_write_space can be
invoked by MPTCP.
INDIRECT_CALL is used to keep the default path optimised.
Note that sk->sk_write_space was never called directly with MPTCP
sockets, so changing it to sk_stream_write_space in the init, and using
it from mptcp_write_space() is not supposed to change the current
behaviour.
This patch is shared early to ease discussions around future RFC and
avoid confusions with this "fix" that is needed for different future
extensions.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Co-developed-by: Gang Yan <yangang@kylinos.cn>
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260206-net-next-mptcp-write_space-override-v2-1-e0b12be818c6@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RX/TX flow-control bitmaps (rx_fc_pfvf_bmap and tx_fc_pfvf_bmap)
are allocated by cgx_lmac_init() but never freed in cgx_lmac_exit().
Unbinding and rebinding the driver therefore triggers kmemleak:
unreferenced object (size 16):
backtrace:
rvu_alloc_bitmap
cgx_probe
Free both bitmaps during teardown.
Fixes: e740003874 ("octeontx2-af: Flow control resource management")
Cc: stable@vger.kernel.org
Signed-off-by: Bo Sun <bo@mboxify.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Jijie Shao <shaojijie@huawei.com>
Link: https://patch.msgid.link/20260206130925.1087588-2-bo@mboxify.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Update IOMMU docs to use stable identifiers
* Print unhashed pointers on fatal stack overflows
-----BEGIN PGP SIGNATURE-----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=Rqoq
-----END PGP SIGNATURE-----
Merge tag 'x86_misc_for_7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Dave Hansen:
"The usual smattering of x86/misc changes.
The IPv6 patch in here surprised me in a couple of ways. First, the
function it inlines is able to eat a lot more CPU time than I would
have expected. Second, the inlining does not seem to bloat the kernel,
at least in the configs folks have tested.
- Inline x86-specific IPv6 checksum helper
- Update IOMMU docs to use stable identifiers
- Print unhashed pointers on fatal stack overflows"
* tag 'x86_misc_for_7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/traps: Print unhashed pointers on stack overflow
Documentation/x86: Update IOMMU spec references to use stable identifiers
x86/lib: Inline csum_ipv6_magic()
Breno Leitao says:
====================
net: netconsole: convert to NBCON console infrastructure
This series adds support for the nbcon (new buffer console) infrastructure
to netconsole, enabling lock-free, priority-based console operations that
are safer in crash scenarios.
The implementation is introduced in three steps:
0) Extend printk to expose CPU and taskname (task->comm) where the
printk originated from. (Thanks John and Petr for the support in
getting this done)
1) Refactor the message fragmentation logic into a reusable helper function
2) Extend nbcon support to non-extended (basic) consoles using the same
infrastructure.
The initial discussion about it appeared a while ago in [1], in order to
solve Mike's HARDIRQ-safe -> HARDIRQ-unsafe lock order warning, and the root
cause is that some hosts were calling IRQ unsafe locks from inside console
lock.
At that time, we didn't have the CON_NBCON_ATOMIC_UNSAFE yet. John
kindly implemented CON_NBCON_ATOMIC_UNSAFE in 187de7c212 ("printk:
nbcon: Allow unsafe write_atomic() for panic"), and now we can
implement netconsole on top of nbcon.
Important to note that netconsole continues to call netpoll and the
network TX helpers with interrupt disable, given the TX are called with
target_list_lock.
====================
Link: https://patch.msgid.link/20260206-nbcon-v7-0-62bda69b1b41@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the CPU and task name captured at printk() time from
nbcon_write_context instead of querying the current execution context.
This provides accurate information about where the message originated,
rather than where netconsole happens to be running.
For CPU, use wctxt->cpu instead of raw_smp_processor_id().
For taskname, use wctxt->comm directly which contains the task
name captured at printk time.
This change ensures netconsole outputs reflect the actual context that
generated the log message, which is especially important when the
console driver runs asynchronously in a dedicated thread.
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260206-nbcon-v7-4-62bda69b1b41@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
