When ECAM is enabled, the driver skipped calling dw_pcie_iatu_setup()
before configuring ECAM iATU entries. This left IO and MEM outbound
windows unprogrammed, resulting in broken IO transactions. Additionally,
dw_pcie_config_ecam_iatu() was only called during host initialization,
so ECAM-related iATU entries were not restored after suspend/resume,
leading to failures in configuration space access
To resolve these issues, move the ECAM iATU configuration to
dw_pcie_iatu_setup(), and invoke dw_pcie_iatu_setup() when ECAM is
enabled.
Furthermore, add error checks in dw_pcie_prog_outbound_atu() and
dw_pcie_prog_inbound_atu() such that an error is returned if the caller is
trying to program an iATU that is outside the number of iATUs supported by
the controller.
Fixes: f6fd357f7a ("PCI: dwc: Prepare the driver for enabling ECAM mechanism using iATU 'CFG Shift Feature'")
Reported-by: Maciej W. Rozycki <macro@orcam.me.uk>
Closes: https://lore.kernel.org/all/alpine.DEB.2.21.2511280256260.36486@angie.orcam.me.uk/
Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Co-developed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
[mani: used imperative tone]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hans Zhang <zhanghuabing@ecosda.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable+noautosel@kernel.org # depends on Clean up iATU index usage in dw_pcie_iatu_setup()
Link: https://patch.msgid.link/20260127151038.1484881-8-cassel@kernel.org
The current iATU index usage in dw_pcie_iatu_setup() is a mess.
For outbound address translation the index is incremented before usage.
For inbound address translation the index is incremented after usage.
Incrementing the index after usage make much more sense, and make the
index usage consistent for both outbound and inbound address translation.
Most likely, the overly complicated logic for the outbound address
translation is because the iATU at index 0 is reserved for CFG IOs
(dw_pcie_other_conf_map_bus()), however, we should be able to use the
exact same logic for the indexing of the outbound and inbound iATUs.
(Only the starting index should be different.)
Create two new variables ob_iatu_index and ib_iatu_index, which makes
it more clear from the name itself that it is a zeroes based index,
and only increment the index if the iATU configuration call succeeded.
Since we always check if there is an index available immediately before
programming the iATU, we can remove the useless "ranges exceed outbound
iATU size" warnings, as the code is already unreachable. For the same
reason, we can also remove the useless breaks outside of the while loops.
No functional changes intended.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hans Zhang <zhanghuabing@ecosda.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260127151038.1484881-7-cassel@kernel.org
When dw_pcie_iatu_setup() configures outbound address translation for both
type PCIE_ATU_TYPE_MEM and PCIE_ATU_TYPE_IO, the iATU index to use is
incremented before calling dw_pcie_prog_outbound_atu().
However for msg_atu_index, the index is not incremented before use,
causing the iATU index to be the same as the last configured iATU index,
which means that it will incorrectly use the same iATU index that is
already in use, breaking outbound address translation.
In total there are three problems with this code:
-It assigns msg_atu_index the same index that was used for the last
outbound address translation window, rather than incrementing the index
before assignment.
-The index should only be incremented (and msg_atu_index assigned) if the
use_atu_msg feature is actually requested/in use (pp->use_atu_msg is set).
-If the use_atu_msg feature is requested/in use, and there are no outbound
iATUs available, the code should return an error, as otherwise when this
this feature is used, it will use an iATU index that is out of bounds.
Fixes: e1a4ec1a95 ("PCI: dwc: Add generic MSG TLP support for sending PME_Turn_Off when system suspend")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hans Zhang <zhanghuabing@ecosda.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260127151038.1484881-6-cassel@kernel.org
If siw_get_hdr() returns -EINVAL before set_rx_fpdu_context(),
qp->rx_fpdu can be NULL. The error path in siw_tcp_rx_data()
dereferences qp->rx_fpdu->more_ddp_segs without checking, which
may lead to a NULL pointer deref. Only check more_ddp_segs when
rx_fpdu is present.
KASAN splat:
[ 101.384271] KASAN: null-ptr-deref in range [0x00000000000000c0-0x00000000000000c7]
[ 101.385869] RIP: 0010:siw_tcp_rx_data+0x13ad/0x1e50
Fixes: 8b6a361b8c ("rdma/siw: receive path")
Signed-off-by: YunJe Shin <ioerts@kookmin.ac.kr>
Link: https://patch.msgid.link/20260204092546.489842-1-ioerts@kookmin.ac.kr
Acked-by: Bernard Metzler <bernard.metzler@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
ib_umad_write computes data_len from user-controlled count and the
MAD header sizes. With a mismatched user MAD header size and RMPP
header length, data_len can become negative and reach ib_create_send_mad().
This can make the padding calculation exceed the segment size and trigger
an out-of-bounds memset in alloc_send_rmpp_list().
Add an explicit check to reject negative data_len before creating the
send buffer.
KASAN splat:
[ 211.363464] BUG: KASAN: slab-out-of-bounds in ib_create_send_mad+0xa01/0x11b0
[ 211.364077] Write of size 220 at addr ffff88800c3fa1f8 by task spray_thread/102
[ 211.365867] ib_create_send_mad+0xa01/0x11b0
[ 211.365887] ib_umad_write+0x853/0x1c80
Fixes: 2be8e3ee8e ("IB/umad: Add P_Key index support")
Signed-off-by: YunJe Shin <ioerts@kookmin.ac.kr>
Link: https://patch.msgid.link/20260203100628.1215408-1-ioerts@kookmin.ac.kr
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Merge ACPI support updates related to _OSC evaluation, the handling of
"system resource" device objects, and ACPI-based device enumeration
for 6.20-rc1/7.0-rc1:
- Fix handling of _OSC errors in acpi_run_osc() to avoid failures on
systems where _OSC error bits are set even though the _OSC return
buffer contains acknowledged feature bits (Rafael Wysocki)
- Clean up and rearrange \_SB._OSC handling for general platform
features and USB4 features to avoid code duplication and unnecessary
memory management overhead (Rafael Wysocki)
- Make the ACPI core device enumeration code handle PNP0C01 and PNP0C02
("system resource") device objects directly instead of letting the
legacy PNP system driver handle them to avoid device enumeration
issues on systems where PNP0C02 is present in the _CID list under
ACPI device objects with a _HID matching a proper device driver in
Linux (Rafael Wysocki)
- Drop workarounds for the known device enumeration issues related to
_CID lists containing PNP0C02 (Rafael Wysocki)
- Drop outdated comment regarding removed function in the ACPI-based
device enumeration code (Julia Lawall)
- Make PRP0001 device matching work as expected for ACPI device objects
using it as a _HID for board development and similar purposes (Kartik
Rajput)
- Use async schedule function in acpi_scan_clear_dep_fn() to avoid
races with user space initialization on some systems (Yicong Yang)
* acpi-bus:
ACPI: scan: Use async schedule function in acpi_scan_clear_dep_fn()
ACPI: bus: Align acpi_device_get_match_data() with driver match order
ACPI: scan: Drop outdated comment regarding removed function
ACPI: scan: Use resource_type() for resource type checking
ACPI: bus: Fix typo under sizeof() in acpi_run_osc()
ACPI: bus: Adjust acpi_osc_handshake() parameter list
ACPI: bus: Rework the handling of \_SB._OSC USB4 features
ACPI: bus: Adjust feature mask creation for \_SB._OSC
ACPI: bus: Rework the handling of \_SB._OSC platform features
ACPI: bus: Rename label and use ACPI_FREE() in acpi_run_osc()
ACPI: bus: Split _OSC error processing out of acpi_run_osc()
ACPI: bus: Split _OSC evaluation out of acpi_run_osc()
ACPI: bus: Rework printing debug messages on _OSC errors
ACPI: bus: Fix handling of _OSC errors in acpi_run_osc()
ACPI: PNP: Drop acpi_nonpnp_device_ids[]
platform/x86/intel/vbtn: Stop creating a platform device
platform/x86/intel/hid: Stop creating a platform device
ACPI: PNP: Drop PNP0C01 and PNP0C02 from acpi_pnp_device_ids[]
The tape device driver only supports 3490E devices on Virtual Tape Server
(VTS). There is no point in keeping separated options and modules for
different device types and general hardware support. Consolidate the tape
config option into a single option, which enables the complete tape support
with one singular module called 'tape_s390'. The corresponding module entry
points are adapted and consolidate in tape_init() and tape_exit()
respectively in tape_core.c
The current module author and descriptions of the individual tape
modules are outdated and haven't been changed for quite some time.
Change it to a more generic description that is in line with the
corresponding supported s390 architecture for the single tape module.
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
`css_alloc_subchannel()` calls `device_initialize()` before setting up
the DMA masks. If `dma_set_coherent_mask()` or `dma_set_mask()` fails,
the error path frees the subchannel structure directly, bypassing
the device model reference counting.
Once `device_initialize()` has been called, the embedded struct device
must be released via `put_device()`, allowing the release callback to
free the container structure.
Fix the error path by dropping the initial device reference with
`put_device()` instead of calling `kfree()` directly.
This ensures correct device lifetime handling and avoids potential
use-after-free or double-free issues.
Fixes: e5dcf0025d ("s390/css: move subchannel lock allocation")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Merge ACPI power management updates, ACPI sysfs interface updates, an
ACPI support update related to PCI, and an ACPI device resources
management update for 6.20-rc1/7.0-rc1:
- Rework ACPI PM notification setup for PCI root buses and modify the
ACPI PM setup for devices to register wakeup source objects under
physical (that is, PCI, platform, etc.) devices instead of doing that
under their ACPI companions (Rafael Wysocki)
- Adjust debug messages regarding postponed ACPI PM printed during
system resume to be more accurate (Rafael Wysocki)
- Remove dead code from lps0_device_attach() (Gergo Koteles)
- Start to invoke Microsoft Function 9 (Turn On Display) of the Low-
Power S0 Idle (LPS0) _DSM in the suspend-to-idle resume flow on
systems with ACPI LPS0 support to address a functional issue on
Lenovo Yoga Slim 7i Aura (15ILL9), where system fans and keyboard
backlights fail to resume after suspend (Jakob Riemenschneider)
- Add sysfs attribute cid for exposing _CID lists under ACPI device
objects (Rafael Wysocki)
- Replace sprintf() with sysfs_emit() in all of the core ACPI sysfs
interface code (Sumeet Pawnikar)
- Use acpi_get_local_u64_address() in the code implementing ACPI
support for PCI to evaluate _ADR instead of evaluating that object
directly (Andy Shevchenko)
- Add JWIPC JVC9100 to irq1_level_low_skip_override[] to unbreak
serial IRQs on that system (Ai Chao)
* acpi-pm:
ACPI: x86: s2idle: Invoke Microsoft _DSM Function 9 (Turn On Display)
ACPI: PM: Adjust messages regarding postponed ACPI PM
ACPI: x86: s2idle: Remove dead code in lps0_device_attach()
ACPI: PM: Register wakeup sources under physical devices
ACPI: PCI: PM: Rework root bus notification setup
* acpi-sysfs:
ACPI: sysfs: Replace sprintf() with sysfs_emit()
ACPI: sysfs: Add device cid attribute for exposing _CID lists
* acpi-pci:
ACPI: PCI: simplify code with acpi_get_local_u64_address()
* acpi-resource:
ACPI: resource: Add JWIPC JVC9100 to irq1_level_low_skip_override[]
Merge ARM-related irq subsystem changes based on the recent ACPICA
updates for 6.20-rc1/7.0-rc1:
- Add support for GICv5 ACPI probing on ARM which is based on the
GICv5 MADT structures and ARM IORT IWB node definitions recently
added to ACPICA (Lorenzo Pieralisi)
* acpi-irq:
irqchip/gic-v5: Add ACPI IWB probing
irqchip/gic-v5: Add ACPI ITS probing
irqchip/gic-v5: Add ACPI IRS probing
irqchip/gic-v5: Split IRS probing into OF and generic portions
PCI/MSI: Make the pci_msi_map_rid_ctlr_node() interface firmware agnostic
irqdomain: Add parent field to struct irqchip_fwid
Merge ACPICA changes for 6.20-rc1/7.0-rc1:
- Update the ACPICA code in the kernel to upstream version 20251212
which includes the following changes:
* Add support for new ACPI table DTPR (Michal Camacho Romero)
* Release objects with acpi_ut_delete_object_desc() (Zilin Guan)
* Add UUIDs for Microsoft fan extensions and UUIDs associated with
TPM 2.0 devices (Armin Wolf)
* Fix NULL pointer dereference in acpi_ev_address_space_dispatch()
(Alexey Simakov)
* Add KEYP ACPI table definition (Dave Jiang)
* Add support for the Microsoft display mux _OSI string (Armin Wolf)
* Add definitions for the IOVT ACPI table (Xianglai Li)
* Abort AML bytecode execution on AML_FATAL_OP (Armin Wolf)
* Include all fields in subtable type1 for PPTT (Ben Horgan)
* Add GICv5 MADT structures and Arm IORT IWB node definitions (Jose
Marinho)
* Update Parameter Block structure for RAS2 and add a new flag in
Memory Affinity Structure for SRAT (Pawel Chmielewski)
* Add _VDM (Voltage Domain) object (Pawel Chmielewski)
* acpica: (26 commits)
ACPICA: Refactor for TPR Base/Limit registers bitmasks
ACPICA: Replace TPRn Base and Limit registers
ACPICA: Logfile: Changes for version 20251212
ACPICA: Align comments in TPRn-related structures
ACPICA: Cleanup comments and DTPR Table handle functions
ACPICA: Verify DTPR and TPR Instance buffer pointers
ACPICA: Fix Segmentation Fault error related to DTPR
ACPICA: Create auxiliary ACPI_TPR_AUX_SR structure for iASL compiler
ACPICA: ACPI 6.6: Add _VDM (Voltage Domain) object
ACPICA: actbl3.h: ACPI 6.6: SRAT: New flag in Memory Affinity Structure
ACPICA: actbl2.h: ACPI 6.6: RAS2: Update Parameter Block structure
ACPICA: Add Arm IORT IWB node definitions
ACPICA: Add GICv5 MADT structures
ACPICA: Fix asltests using the Fatal() opcode
ACPICA: ACPI 6.4: PPTT: include all fields in subtable type1
ACPICA: Abort AML bytecode execution when executing AML_FATAL_OP
ACPICA: Define DTPR structure related info tables and data template
ACPICA: Add DTPR table support for the ASL compiler
ACPICA: iASL: Add definitions for the IOVT table
ACPICA: Add support for the Microsoft display mux _OSI string
...
As CAN skbs don't use IP checksums the skb->csum_start variable was used to
store the can-gw CAN frame time-to-live counter together with
skb->ip_summed set to CHECKSUM_UNNECESSARY.
Remove the 'hack' using the skb->csum_start variable and move the content
to can_skb_ext::can_gw_hops of the CAN skb extensions.
The module parameter 'max_hops' has been reduced to a single byte to fit
can_skb_ext::can_gw_hops as the maximum value to be stored is 6.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-6-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch removes struct can_skb_priv which was stored at skb->head and
the can_skb_reserve() helper which was used to shift skb->head.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-5-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The can_skb_priv::frame_len variable is used to cache a previous
calculated CAN frame length to be passed to BQL queueing disciplines.
Move the can_skb_priv::frame_len content to can_skb_ext::can_framelen.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-4-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When routing CAN frames over different CAN interfaces the interface index
skb->iif is overwritten with every single hop. To prevent sending a CAN
frame back to its originating (first) incoming CAN interface another
ifindex variable is needed, which was stored in can_skb_priv::ifindex.
Move the can_skb_priv::ifindex content to can_skb_ext::can_iif.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-3-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
To remove the private CAN bus skb headroom infrastructure 8 bytes need to
be stored in the skb. The skb extensions are a common pattern and an easy
and efficient way to hold private data travelling along with the skb. We
only need the skb_ext_add() and skb_ext_find() functions to allocate and
access CAN specific content as the skb helpers to copy/clone/free skbs
automatically take care of skb extensions and their final removal.
This patch introduces the complete CAN skb extensions infrastructure:
- add struct can_skb_ext in new file include/net/can.h
- add include/net/can.h in MAINTAINERS
- add SKB_EXT_CAN to skbuff.c and skbuff.h
- select SKB_EXTENSIONS in Kconfig when CONFIG_CAN is enabled
- check for existing CAN skb extensions in can_rcv() in af_can.c
- add CAN skb extensions allocation at every skb_alloc() location
- duplicate the skb extensions if cloning outgoing skbs (framelen/gw_hops)
- introduce can_skb_ext_add() and can_skb_ext_find() helpers
The patch also corrects an indention issue in the original code from 2018:
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602010426.PnGrYAk3-lkp@intel.com/
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-2-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The can_skb_priv::skbcnt variable is used to identify CAN skbs in the RX
path analogue to the skb->hash.
As the skb hash is not filled in CAN skbs move the private skbcnt value to
skb->hash and set skb->sw_hash accordingly. The skb->hash is a value used
for RPS to identify skbs. Use it as intended.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://patch.msgid.link/20260201-can_skb_ext-v8-1-3635d790fe8b@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
USB system wakeup need its PHY on, so add the GENPD_FLAG_ACTIVE_WAKEUP
flags to USB PHY genpd configuration.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Fixes: 556f5cf956 ("soc: imx: add i.MX8MP HSIO blk-ctrl")
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Current design will power off all dependent GPC power domains in
imx8mp_blk_ctrl_suspend(), even though the user device has enabled
wakeup capability. The result is that wakeup function never works
for such device.
An example will be USB wakeup on i.MX8MP. PHY device '382f0040.usb-phy'
is attached to power domain 'hsioblk-usb-phy2' which is spawned by hsio
block control. A virtual power domain device 'genpd:3:32f10000.blk-ctrl'
is created to build connection with 'hsioblk-usb-phy2' and it depends on
GPC power domain 'usb-otg2'. If device '382f0040.usb-phy' enable wakeup,
only power domain 'hsioblk-usb-phy2' keeps on during system suspend,
power domain 'usb-otg2' is off all the time. So the wakeup event can't
happen.
In order to further establish a connection between the power domains
related to GPC and block control during system suspend, register a genpd
power on/off notifier for the power_dev. This allows us to prevent the GPC
power domain from being powered off, in case the block control power
domain is kept on to serve system wakeup.
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Fixes: 556f5cf956 ("soc: imx: add i.MX8MP HSIO blk-ctrl")
Cc: stable@vger.kernel.org
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Simplify the error handling in dw_i2c_plat_probe() by consolidating
cleanup operations directly in the error path instead of using a
goto label.
This eliminates the goto statement, makes the error handling more
transparent, and reduces code indirection while maintaining identical
cleanup behavior on probe failure.
Signed-off-by: Artem Shimko <a.shimko.dev@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260130111039.874548-3-a.shimko.dev@gmail.com
The current implementation uses separate calls to acquire and deassert
reset control, requiring manual error handling for the deassertion
operation. This can be simplified using the dedicated devm function that
combines both operations.
Replace devm_reset_control_get_optional_exclusive() with
devm_reset_control_get_optional_exclusive_deasserted(), which handles both
reset acquisition and deassertion in a single call as well as
reset_control_put() which is called automatically on driver detach. This
eliminates the need for explicit deassertion and its associated error
checking while maintaining the same functional behavior through automatic
resource management.
Signed-off-by: Artem Shimko <a.shimko.dev@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260130111039.874548-2-a.shimko.dev@gmail.com
Recently TC maintainer Jamal intentionally a broke reasonable
use case:
https://lore.kernel.org/netdev/aG10rqwjX6elG1Gx@pop-os.localdomain/
Although I tried my best to help by:
1) Strongly objecting this breakage from the very beginning
2) Reverting it and offering a much better solution
3) Offering Jamal for video chat on 8 Jul 2025 and 26 Nov 2025
None of them worked.
So it makes no sense for me to continue caring about this subsystem.
Most importantly, intentionally breaking reasonable use cases is
against my moral, I don't want to get ashamed.
Thanks for the opportunity!
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20260130212021.46610-1-xiyou.wangcong@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some driver use fence->ops to test if a fence was initialized or not.
The problem is that this utilizes internal behavior of the dma_fence
implementation.
So better abstract that into a function.
v2: use a flag instead of testing fence->ops, rename the function, move
to the beginning of the patch set.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/20260120105655.7134-2-christian.koenig@amd.com
The following changes are proposed in the upcoming Linux 7.0:
- Enable LZMA support by default, as it's already in use by Fedora 42/43
and some Android vendors for minimal filesystem sizes;
- Promote DEFLATE and Zstandard out of EXPERIMENTAL status, given that
they have been landed and well-tested for over a year and are
already ready for general use.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Compressed folios for ztailpacking pclusters must be valid before adding
these pclusters to I/O chains. Otherwise, z_erofs_decompress_pcluster()
may assume they are already valid and then trigger a NULL pointer
dereference.
It is somewhat hard to reproduce because the inline data is in the same
block as the tail of the compressed indexes, which are usually read just
before. However, it may still happen if a fatal signal arrives while
read_mapping_folio() is running, as shown below:
erofs: (device dm-1): z_erofs_pcluster_begin: failed to get inline data -4
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
...
pc : z_erofs_decompress_queue+0x4c8/0xa14
lr : z_erofs_decompress_queue+0x160/0xa14
sp : ffffffc08b3eb3a0
x29: ffffffc08b3eb570 x28: ffffffc08b3eb418 x27: 0000000000001000
x26: ffffff8086ebdbb8 x25: ffffff8086ebdbb8 x24: 0000000000000001
x23: 0000000000000008 x22: 00000000fffffffb x21: dead000000000700
x20: 00000000000015e7 x19: ffffff808babb400 x18: ffffffc089edc098
x17: 00000000c006287d x16: 00000000c006287d x15: 0000000000000004
x14: ffffff80ba8f8000 x13: 0000000000000004 x12: 00000006589a77c9
x11: 0000000000000015 x10: 0000000000000000 x9 : 0000000000000000
x8 : 0000000000000000 x7 : 0000000000000000 x6 : 000000000000003f
x5 : 0000000000000040 x4 : ffffffffffffffe0 x3 : 0000000000000020
x2 : 0000000000000008 x1 : 0000000000000000 x0 : 0000000000000000
Call trace:
z_erofs_decompress_queue+0x4c8/0xa14
z_erofs_runqueue+0x908/0x97c
z_erofs_read_folio+0x128/0x228
filemap_read_folio+0x68/0x128
filemap_get_pages+0x44c/0x8b4
filemap_read+0x12c/0x5b8
generic_file_read_iter+0x4c/0x15c
do_iter_readv_writev+0x188/0x1e0
vfs_iter_read+0xac/0x1a4
backing_file_read_iter+0x170/0x34c
ovl_read_iter+0xf0/0x140
vfs_read+0x28c/0x344
ksys_read+0x80/0xf0
__arm64_sys_read+0x24/0x34
invoke_syscall+0x60/0x114
el0_svc_common+0x88/0xe4
do_el0_svc+0x24/0x30
el0_svc+0x40/0xa8
el0t_64_sync_handler+0x70/0xbc
el0t_64_sync+0x1bc/0x1c0
Fix this by reading the inline data before allocating and adding
the pclusters to the I/O chains.
Fixes: cecf864d3d ("erofs: support inline data decompression")
Reported-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-and-tested-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
* kvm-arm64/misc-6.20:
: .
: Misc KVM/arm64 changes for 6.20
:
: - Trivial FPSIMD cleanups
:
: - Calculate hyp VA size only once, avoiding potential mapping issues when
: VA bits is smaller than expected
:
: - Silence sparse warning for the HYP stack base
:
: - Fix error checking when handling FFA_VERSION
:
: - Add missing trap configuration for DBGWCR15_EL1
:
: - Don't try to deal with nested S2 when NV isn't enabled for a guest
:
: - Various spelling fixes
: .
KVM: arm64: nv: Avoid NV stage-2 code when NV is not supported
KVM: arm64: Fix various comments
KVM: arm64: nv: Add trap config for DBGWCR<15>_EL1
KVM: arm64: Fix error checking for FFA_VERSION
KVM: arm64: Fix missing <asm/stackpage/nvhe.h> include
KVM: arm64: Calculate hyp VA size only once
KVM: arm64: Remove ISB after writing FPEXC32_EL2
KVM: arm64: Shuffle KVM_HOST_DATA_FLAG_* indices
KVM: arm64: Fix comment in fpsimd_lazy_switch_to_host()
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/resx:
: .
: Add infrastructure to deal with the full gamut of RESx bits
: for NV. As a result, it is now possible to have the expected
: semantics for some bits such as SCTLR_EL2.SPAN.
: .
KVM: arm64: Add debugfs file dumping computed RESx values
KVM: arm64: Add sanitisation to SCTLR_EL2
KVM: arm64: Remove all traces of HCR_EL2.MIOCNCE
KVM: arm64: Remove all traces of FEAT_TME
KVM: arm64: Simplify handling of full register invalid constraint
KVM: arm64: Get rid of FIXED_VALUE altogether
KVM: arm64: Simplify handling of HCR_EL2.E2H RESx
KVM: arm64: Move RESx into individual register descriptors
KVM: arm64: Add RES1_WHEN_E2Hx constraints as configuration flags
KVM: arm64: Add REQUIRES_E2H1 constraint as configuration flags
KVM: arm64: Simplify FIXED_VALUE handling
KVM: arm64: Convert HCR_EL2.RW to AS_RES1
KVM: arm64: Correctly handle SCTLR_EL1 RES1 bits for unsupported features
KVM: arm64: Allow RES1 bits to be inferred from configuration
KVM: arm64: Inherit RESx bits from FGT register descriptors
KVM: arm64: Extend unified RESx handling to runtime sanitisation
KVM: arm64: Introduce data structure tracking both RES0 and RES1 bits
KVM: arm64: Introduce standalone FGU computing primitive
KVM: arm64: Remove duplicate configuration for SCTLR_EL1.{EE,E0E}
arm64: Convert SCTLR_EL2 to sysreg infrastructure
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/debugfs-fixes:
: .
: Cleanup of the debugfs iterator, which are way more complicated
: than they ought to be, courtesy of Fuad Tabba. From the cover letter:
:
: "This series refactors the debugfs implementations for `idregs` and
: `vgic-state` to use standard `seq_file` iterator patterns.
:
: The existing implementations relied on storing iterator state within
: global VM structures (`kvm_arch` and `vgic_dist`). This approach
: prevented concurrent reads of the debugfs files (returning -EBUSY) and
: created improper dependencies between transient file operations and
: long-lived VM state."
: .
KVM: arm64: Use standard seq_file iterator for vgic-debug debugfs
KVM: arm64: Reimplement vgic-debug XArray iteration
KVM: arm64: Use standard seq_file iterator for idregs debugfs
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/gicv5-prologue:
: .
: Prologue to GICv5 support, courtesy of Sascha Bischoff.
:
: This is preliminary work that sets the scene for the full-blow
: support.
: .
irqchip/gic-v5: Check if impl is virt capable
KVM: arm64: gic: Set vgic_model before initing private IRQs
arm64/sysreg: Drop ICH_HFGRTR_EL2.ICC_HAPR_EL1 and make RES1
KVM: arm64: gic-v3: Switch vGIC-v3 to use generated ICH_VMCR_EL2
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/gicv3-tdir-fixes:
: .
: Address two trapping-related issues when running legacy (i.e. GICv3)
: guests on GICv5 hosts, courtesy of Sascha Bischoff.
: .
KVM: arm64: Correct test for ICH_HCR_EL2_TDIR cap for GICv5 hosts
KVM: arm64: gic: Enable GICv3 CPUIF trapping on GICv5 hosts if required
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/fwb-for-all:
: .
: Allow pKVM's host stage-2 mappings to use the Force Write Back version
: of the memory attributes by using the "pass-through' encoding.
:
: This avoids having two separate encodings for S2 on a given platform.
: .
KVM: arm64: Simplify PAGE_S2_MEMATTR
KVM: arm64: Kill KVM_PGTABLE_S2_NOFWB
KVM: arm64: Switch pKVM host S2 over to KVM_PGTABLE_S2_AS_S1
KVM: arm64: Add KVM_PGTABLE_S2_AS_S1 flag
arm64: Add MT_S2{,_FWB}_AS_S1 encodings
Signed-off-by: Marc Zyngier <maz@kernel.org>
* kvm-arm64/pkvm-no-mte:
: .
: pKVM updates preventing the host from using MTE-related system
: sysrem registers when the feature is disabled from the kernel
: command-line (arm64.nomte), courtesy of Fuad Taba.
:
: From the cover letter:
:
: "If MTE is supported by the hardware (and is enabled at EL3), it remains
: available to lower exception levels by default. Disabling it in the host
: kernel (e.g., via 'arm64.nomte') only stops the kernel from advertising
: the feature; it does not physically disable MTE in the hardware.
:
: The ability to disable MTE in the host kernel is used by some systems,
: such as Android, so that the physical memory otherwise used as tag
: storage can be used for other things (i.e. treated just like the rest of
: memory). In this scenario, a malicious host could still access tags in
: pages donated to a guest using MTE instructions (e.g., STG and LDG),
: bypassing the kernel's configuration."
: .
KVM: arm64: Use kvm_has_mte() in pKVM trap initialization
KVM: arm64: Inject UNDEF when accessing MTE sysregs with MTE disabled
KVM: arm64: Trap MTE access and discovery when MTE is disabled
KVM: arm64: Remove dead code resetting HCR_EL2 for pKVM
Signed-off-by: Marc Zyngier <maz@kernel.org>
PPP channels using chan->direct_xmit prepend the PPP header to a skb and
call dev_queue_xmit() directly. In this mode the skb does not need to be
linear, but the PPP netdevice currently does not advertise
scatter-gather features, causing unnecessary linearization and
preventing GSO.
Enable NETIF_F_SG and NETIF_F_FRAGLIST on PPP devices. In case a linear
buffer is required (PPP compression, multilink, and channels without
direct_xmit), call skb_linearize() explicitly.
Signed-off-by: Qingfang Deng <dqfext@gmail.com>
Link: https://patch.msgid.link/20260129012902.941-1-dqfext@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Computing RESx values is hard. Verifying that they are correct is
harder. Add a debugfs file called "resx" that will dump all the RESx
values for a given VM.
I found it useful, maybe you will too.
Co-developed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260202184329.2724080-21-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Sanitise SCTLR_EL2 the usual way. The most important aspect of
this is that we benefit from SCTLR_EL2.SPAN being RES1 when
HCR_EL2.E2H==0.
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260202184329.2724080-20-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
MIOCNCE had the potential to eat your data, and also was never
implemented by anyone. It's been retrospectively removed from
the architecture, and we're happy to follow that lead.
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260202184329.2724080-19-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
FEAT_TME has been dropped from the architecture. Retrospectively.
I'm sure someone is crying somewhere, but most of us won't.
Clean-up time.
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260202184329.2724080-18-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Now that we embed the RESx bits in the register description, it becomes
easier to deal with registers that are simply not valid, as their
existence is not satisfied by the configuration (SCTLR2_ELx without
FEAT_SCTLR2, for example). Such registers essentially become RES0 for
any bit that wasn't already advertised as RESx.
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260202184329.2724080-17-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
We have now killed every occurrences of FIXED_VALUE, and we can therefore
drop the whole infrastructure. Good riddance.
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260202184329.2724080-16-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Now that we can link the RESx behaviour with the value of HCR_EL2.E2H,
we can trivially express the tautological constraint that makes E2H
a reserved value at all times.
Fun, isn't it?
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260202184329.2724080-15-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Instead of hacking the RES1 bits at runtime, move them into the
register descriptors. This makes it significantly nicer.
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260202184329.2724080-14-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
"Thanks" to VHE, SCTLR_EL2 radically changes shape depending on the
value of HCR_EL2.E2H, as a lot of the bits that didn't have much
meaning with E2H=0 start impacting EL0 with E2H=1.
This has a direct impact on the RESx behaviour of these bits, and
we need a way to express them.
For this purpose, introduce two new constaints that, when the
controlling feature is not present, force the field to RES1 depending
on the value of E2H. Note that RES0 is still implicit,
This allows diverging RESx values depending on the value of E2H,
something that is required by a bunch of SCTLR_EL2 bits.
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260202184329.2724080-13-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
A bunch of EL2 configuration are very similar to their EL1 counterpart,
with the added constraint that HCR_EL2.E2H being 1.
For us, this means HCR_EL2.E2H being RES1, which is something we can
statically evaluate.
Add a REQUIRES_E2H1 constraint, which allows us to express conditions
in a much simpler way (without extra code). Existing occurrences are
converted, before we add a lot more.
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260202184329.2724080-12-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
The FIXED_VALUE qualifier (mostly used for HCR_EL2) is pointlessly
complicated, as it tries to piggy-back on the previous RES0 handling
while being done in a different phase, on different data.
Instead, make it an integral part of the RESx computation, and allow
it to directly set RESx bits. This is much easier to understand.
It also paves the way for some additional changes to that will allow
the full removal of the FIXED_VALUE handling.
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260202184329.2724080-11-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Now that we have the AS_RES1 constraint, it becomes trivial to express
the HCR_EL2.RW behaviour.
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260202184329.2724080-10-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
A bunch of SCTLR_EL1 bits must be set to RES1 when the controlling
feature is not present. Add the AS_RES1 qualifier where needed.
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260202184329.2724080-9-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
So far, when a bit field is tied to an unsupported feature, we set
it as RES0. This is almost correct, but there are a few exceptions
where the bits become RES1.
Add a AS_RES1 qualifier that instruct the RESx computing code to
simply do that.
Reviewed-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Tested-by: Fuad Tabba <tabba@google.com>
Link: https://patch.msgid.link/20260202184329.2724080-8-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
When booting from LEFI firmware, the devicetree is chosen by matching
bridge type and CPU PRID. However, serials on Loongson devices may not
have the same clock frequency across different boards. For example,
CPU UARTs found on Loongson 3A4000 is supplied by the system clock,
which may be either 25MHz or 100MHz.
Luckily, LEFI firmware interface provides information about UART
address and corresponding clock frequency. Let's fixup clock-frequency
properties for serials after FDT selection by matching FDT nodes with
addresses provided by firmware.
Signed-off-by: Yao Zi <me@ziyao.cc>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
