Upcoming GNSS (NMEA) port type support requires exporting it via the
GNSS subsystem. On another hand, we still need to do basic WWAN core
work: call the port stop operation, purge queues, release the parent
WWAN device, etc. To reuse as much code as possible, split the port
unregistering function into the deregistration of a regular WWAN port
device, and the common port tearing down code.
In order to keep more code generic, break the device_unregister() call
into device_del() and put_device(), which release the port memory
uniformly.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20260126062158.308598-5-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Upcoming GNSS (NMEA) port type support requires exporting it via the
GNSS subsystem. On another hand, we still need to do basic WWAN core
work: find or allocate the WWAN device, make it the port parent, etc. To
reuse as much code as possible, split the port creation function into
the registration of a regular WWAN port device, and basic port struct
initialization.
To be able to use put_device() uniformly, break the device_register()
call into device_initialize() and device_add() and call device
initialization earlier.
While at it, fix a minor number leak upon WWAN port registration
failure.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://patch.msgid.link/20260126062158.308598-4-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We need information about existing WWAN device children since we remove
the device after removing the last child. Previously, we tracked users
implicitly by checking whether ops was registered and existence of a
child device of the wwan_class class. Upcoming GNSS (NMEA) port type
support breaks this approach by introducing a child device of the
gnss_class class.
And a modem driver can easily trigger a kernel Oops by removing regular
(e.g., MBIM, AT) ports first and then removing a GNSS port. The WWAN
device will be unregistered on removal of a last regular WWAN port. And
subsequent GNSS port removal will cause NULL pointer dereference in
simple_recursive_removal().
In order to support ports of classes other than wwan_class, switch to
explicit references counting. Introduce a dedicated counter to the WWAN
device struct, increment it on every wwan_create_dev() call, decrement
on wwan_remove_dev(), and actually unregister the WWAN device when there
are no more references.
Run tested with wwan_hwsim with NMEA support patches applied and
different port removing sequences.
Reported-by: Daniele Palmas <dnlplm@gmail.com>
Closes: https://lore.kernel.org/netdev/CAGRyCJE28yf-rrfkFbzu44ygLEvoUM7fecK1vnrghjG_e9UaRA@mail.gmail.com/
Suggested-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Link: https://patch.msgid.link/20260126062158.308598-3-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It was used initially for a port id allocation, then removed, and then
accidently introduced again, but it is still unused. Drop it again to
keep code clean.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20260126062158.308598-2-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mike Marciniszyn says:
====================
eth fbnic: Add debugfs for mbx and tx/rx
This patches adds debugfs read of the firmware mailbox tx/rx
and of the tx/rx rings for each napi vector.
====================
Link: https://patch.msgid.link/20260127200644.11640-1-mike.marciniszyn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add debugfs hooks to display tx/rx rings for each napi
vector.
Note that the cloning mechanism in fbnic_ethtool.c for configuration
changes protects against concurrency issues with simultaneous config
changes along with debugs ring accesses.
The configuration switch builds up the new configuration offline,
takes the current config down, which removes the debugfs nv files, and
switches to the new configuration. The new configuration is brought
up which brings the debugfs files back on top of the new configuration
rings.
The interaction with fbnic_queue_stop() and fbnic_queue_start() will
similarly delete and add the files for the indicated vector.
Signed-off-by: Mike Marciniszyn (Meta) <mike.marciniszyn@gmail.com>
Link: https://patch.msgid.link/20260127200644.11640-3-mike.marciniszyn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds reporting the Rx and Tx information
interfacing with the firmware.
The result of reading fbnic/fw_mbx is:
Rx
Rdy: 1 Head: 11 Tail: 10
Idx Len E Addr F H Raw
----------------------------------
00 4096 0 000101fea000 0 1 1000000101fea001
01 4096 0 000101feb000 0 1 1000000101feb001
.
.
.
15 4096 0 000101fe9000 0 1 1000000101fe9001
Tx
Rdy: 1 Head: 4 Tail: 4
Idx Len E Addr F H Raw
----------------------------------
00 0004 1 00010321b000 1 1 000440010321b003
01 0004 1 00010228d000 1 1 000440010228d003
.
.
.
15 0004 1 00010321b000 1 1 000440010321b003
Signed-off-by: Mike Marciniszyn (Meta) <mike.marciniszyn@gmail.com>
Link: https://patch.msgid.link/20260127200644.11640-2-mike.marciniszyn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Many USB network drivers define get_drvinfo functions which add no
value over usbnet_get_drvinfo, only setting the driver name and
version. usbnet_get_drvinfo automatically sets the driver name, and
separate driver versions are now frowned upon in the kernel. Remove all
driver versions and replace these get_drvinfo functions with references
to usbnet_get_drvinfo where possible. Where that is not possible,
remove unnecessary code to set the driver name. Also remove two
unnecessary initializations from aqc111_get_drvinfo, an inaccurate
comment in pegasus.c, and an unused macro in catc.c.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Peter Korsgaard <peter@korsgaard.com> (for dm9601.c)
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Link: https://patch.msgid.link/20260129042435.13395-2-enelsonmoore@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
valis provided a nice repro to crash the kernel:
ip link add p1 type veth peer p2
ip link set address 00:00:00:00:00:20 dev p1
ip link set up dev p1
ip link set up dev p2
ip link add mv0 link p2 type macvlan mode source
ip link add invalid% link p2 type macvlan mode source macaddr add 00:00:00:00:00:20
ping -c1 -I p1 1.2.3.4
He also gave a very detailed analysis:
<quote valis>
The issue is triggered when a new macvlan link is created with
MACVLAN_MODE_SOURCE mode and MACVLAN_MACADDR_ADD (or
MACVLAN_MACADDR_SET) parameter, lower device already has a macvlan
port and register_netdevice() called from macvlan_common_newlink()
fails (e.g. because of the invalid link name).
In this case macvlan_hash_add_source is called from
macvlan_change_sources() / macvlan_common_newlink():
This adds a reference to vlan to the port's vlan_source_hash using
macvlan_source_entry.
vlan is a pointer to the priv data of the link that is being created.
When register_netdevice() fails, the error is returned from
macvlan_newlink() to rtnl_newlink_create():
if (ops->newlink)
err = ops->newlink(dev, ¶ms, extack);
else
err = register_netdevice(dev);
if (err < 0) {
free_netdev(dev);
goto out;
}
and free_netdev() is called, causing a kvfree() on the struct
net_device that is still referenced in the source entry attached to
the lower device's macvlan port.
Now all packets sent on the macvlan port with a matching source mac
address will trigger a use-after-free in macvlan_forward_source().
</quote valis>
With all that, my fix is to make sure we call macvlan_flush_sources()
regardless of @create value whenever "goto destroy_macvlan_port;"
path is taken.
Many thanks to valis for following up on this issue.
Fixes: aa5fd0fb77 ("driver: macvlan: Destroy new macvlan port if macvlan_common_newlink failed.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: valis <sec@valis.email>
Reported-by: syzbot+7182fbe91e58602ec1fe@syzkaller.appspotmail.com
Closes: https: //lore.kernel.org/netdev/695fb1e8.050a0220.1c677c.039f.GAE@google.com/T/#u
Cc: Boudewijn van der Heide <boudewijn@delta-utec.com>
Link: https://patch.msgid.link/20260129204359.632556-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add the support to read the rx alignment errors and update
them in the standard rtnl_link_stats64 structure.
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260129111520.1567097-1-Raju.Rangoju@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit fd580c9830 ("net: sfp: augment SFP parsing with
phy_interface_t bitmap") did not add augumentation for the interface
bitmap in the quirk for Ubiquiti U-Fiber Instant.
The subsequent commit f81fa96d8a ("net: phylink: use
phy_interface_t bitmaps for optical modules") then changed phylink code
for selection of SFP interface: instead of using link mode bitmap, the
interface bitmap is used, and the fastest interface mode supported by
both SFP module and MAC is chosen.
Since the interface bitmap contains also modes faster than 1000base-x,
this caused a regression wherein this module stopped working
out-of-the-box.
Fix this.
Fixes: fd580c9830 ("net: sfp: augment SFP parsing with phy_interface_t bitmap")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260129082227.17443-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit adds SNMP drop count increment for the packets in
per NUMA queues which were introduced in commit b650bf0977
("udp: remove busylock and add per NUMA queues"). note that SNMP
counters are incremented currently by the caller for skb. And
that these skbs on the intermediate queue cannot be counted
there so need similar logic in their error path.
Signed-off-by: Mahdi Faramarzpour <mahdifrmx@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260129083806.204752-1-mahdifrmx@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
One fix for a harmless KMSAN splat.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRRRCHOFoQz/8F5bUaFwuHvBreFYQUCaX0kngAKCRCFwuHvBreF
YXWyAP435W/W/wc/i/R3LCHGxHJFEZHyeH+l3KyKZOQPfQSm/gD+MVk3LdABPfYr
7ZIj/9OoRK+69RLzS4zrA3rzqwkuLQg=
=G0MC
-----END PGP SIGNATURE-----
Merge tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd fix from Jason Gunthorpe:
"One fix for a harmless KMSAN splat"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Initialize batch->kind in batch_clear()
By default, when a kmem_cache is created with SLAB_TYPESAFE_BY_RCU,
slub has to use extra storage for the freelist pointer after each
object, because slub assumes that any bit in the object
can be used by RCU readers.
Because proto_register() is also using SLAB_HWCACHE_ALIGN,
this forces slub to use one extra cache line per object.
We can instead put the slub freelist anywhere in the object,
granted the concurrent RCU readers are not supposed to
use the pointer value.
Add a new (struct sock)sk_freeptr field, in an union
with sk_rcu: No RCU readers would need to look at sk_rcu,
which is only used at free phase.
Tested:
grep . /sys/kernel/slab/TCP/{object_size,slab_size,objs_per_slab}
grep . /sys/kernel/slab/TCPv6/{object_size,slab_size,objs_per_slab}
Before:
/sys/kernel/slab/TCP/object_size:2368
/sys/kernel/slab/TCP/slab_size:2432
/sys/kernel/slab/TCP/objs_per_slab:13
/sys/kernel/slab/TCPv6/object_size:2496
/sys/kernel/slab/TCPv6/slab_size:2560
/sys/kernel/slab/TCPv6/objs_per_slab:12
After this patch, we can pack one more TCPv6 object per slab,
and object_size == slab_size.
/sys/kernel/slab/TCP/object_size:2368
/sys/kernel/slab/TCP/slab_size:2368
/sys/kernel/slab/TCP/objs_per_slab:13
/sys/kernel/slab/TCPv6/object_size:2496
/sys/kernel/slab/TCPv6/slab_size:2496
/sys/kernel/slab/TCPv6/objs_per_slab:13
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260129153458.4163797-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a race condition introduced in v6.18. Andreas Persson discovered this
issue while working with Focusrite Saffire Pro 40 (TCD33070). The fw_card
instance maintains a linked list of pending transactions, which must be
protected against concurrent access. However, a commit b5725cfa41
("firewire: core: use spin lock specific to timer for split transaction")
unintentionally allowed concurrent accesses to this list. Fix this by
adjusting the relevant critical sections to properly serialize access.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCaX00QAAKCRCsLtaWM8Lw
E0G/AP9PAE2Una4WBWNMw24zgyMYJyODekEQEZLr72ksPHMDGQD9GZNKylKogQdi
OquDPN4J93mw4/9DGtCbF8ZEQLAxdwA=
=7hNC
-----END PGP SIGNATURE-----
Merge tag 'firewire-fixes-6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire fix from Takashi Sakamoto:
"Fix a race condition introduced in v6.18.
Andreas Persson discovered this issue while working with Focusrite
Saffire Pro 40 (TCD33070). The fw_card instance maintains a linked
list of pending transactions, which must be protected against
concurrent access.
However, a commit b5725cfa41 ("firewire: core: use spin lock
specific to timer for split transaction") unintentionally allowed
concurrent accesses to this list.
Fix this by adjusting the relevant critical sections to properly
serialize access"
* tag 'firewire-fixes-6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: fix race condition against transaction list
- Correct the RISC-V compat.h COMPAT_UTS_MACHINE architecture name
- Avoid printing a false warning message on kernels with the SiFive and
MIPS errata compiled in
- Address a few warnings generated by sparse in the signal handling code
- Fix a comment typo
-----BEGIN PGP SIGNATURE-----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=X9tE
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- Correct the RISC-V compat.h COMPAT_UTS_MACHINE architecture name
- Avoid printing a false warning message on kernels with the SiFive and
MIPS errata compiled in
- Address a few warnings generated by sparse in the signal handling
code
- Fix a comment typo
* tag 'riscv-for-linus-6.19-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: compat: fix COMPAT_UTS_MACHINE definition
errata/sifive: remove unreliable warn_miss_errata
riscv: fix minor typo in syscall.h comment
riscv: signal: fix some warnings reported by sparse
Toolchain and infrastructure:
- Trigger rebuilds of the newly added 'proc-macro2' crate (and its
dependencies) when the Rust compiler version changes.
- Fix error in '.rsi' targets (macro expanding single targets) under
'O=' pointing to an external (not subdir) folder.
- Fix off-by-one line number in 'rustdoc' KUnit tests.
- Add '-fdiagnostics-show-context' to GCC flags skipped by 'bindgen'.
- Clean objtool warning by adding one more 'noreturn' function.
- Clean 'libpin_init_internal.{so,dylib}' in 'mrproper'.
'kernel' crate:
- Fix build error when using expressions in formatting arguments.
- Mark 'num::Bounded::__new()' as unsafe and clean documentation
accordingly.
- Always inline functions using 'build_assert' with arguments.
- Fix 'rusttest' build error providing the right 'isize_atomic_repr'
type for the host.
'macros' crate:
- Fix 'rusttest' build error by ignoring example.
rust-analyzer:
- Remove assertion that was not true for distributions like NixOS.
- Add missing dependency edges and fix editions for 'quote' and
sysroot crates to provide correct IDE support.
DRM Tyr:
- Fix build error by adding missing dependency on 'CONFIG_COMMON_CLK'.
Plus clean a few typos in docs and comments.
-----BEGIN PGP SIGNATURE-----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=C6JY
-----END PGP SIGNATURE-----
Merge tag 'rust-fixes-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux
Pull Rust fixes from Miguel Ojeda:
"Toolchain and infrastructure:
- Trigger rebuilds of the newly added 'proc-macro2' crate (and its
dependencies) when the Rust compiler version changes
- Fix error in '.rsi' targets (macro expanding single targets) under
'O=' pointing to an external (not subdir) folder
- Fix off-by-one line number in 'rustdoc' KUnit tests
- Add '-fdiagnostics-show-context' to GCC flags skipped by 'bindgen'
- Clean objtool warning by adding one more 'noreturn' function
- Clean 'libpin_init_internal.{so,dylib}' in 'mrproper'
'kernel' crate:
- Fix build error when using expressions in formatting arguments
- Mark 'num::Bounded::__new()' as unsafe and clean documentation
accordingly
- Always inline functions using 'build_assert' with arguments
- Fix 'rusttest' build error providing the right 'isize_atomic_repr'
type for the host
'macros' crate:
- Fix 'rusttest' build error by ignoring example
rust-analyzer:
- Remove assertion that was not true for distributions like NixOS
- Add missing dependency edges and fix editions for 'quote' and
sysroot crates to provide correct IDE support
DRM Tyr:
- Fix build error by adding missing dependency on 'CONFIG_COMMON_CLK'
Plus clean a few typos in docs and comments"
* tag 'rust-fixes-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (28 commits)
rust: num: bounded: clean __new documentation and comments
scripts: generate_rust_analyzer: fix resolution of #[pin_data] macros
drm/tyr: depend on `COMMON_CLK` to fix build error
rust: sync: atomic: Provide stub for `rusttest` 32-bit hosts
kbuild: rust: clean libpin_init_internal in mrproper
rust: proc-macro2: rebuild if the version text changes
rust: num: bounded: add missing comment for always inlined function
rust: sync: refcount: always inline functions using build_assert with arguments
rust: bits: always inline functions using build_assert with arguments
scripts: generate_rust_analyzer: compile sysroot with correct edition
scripts: generate_rust_analyzer: compile quote with correct edition
scripts: generate_rust_analyzer: quote: treat `core` and `std` as dependencies
scripts: generate_rust_analyzer: syn: treat `std` as a dependency
scripts: generate_rust_analyzer: remove sysroot assertion
rust: kbuild: give `--config-path` to `rustfmt` in `.rsi` target
scripts: generate_rust_analyzer: Add pin_init_internal deps
scripts: generate_rust_analyzer: Add pin_init -> compiler_builtins dep
scripts: generate_rust_analyzer: Add compiler_builtins -> core dep
rust: macros: ignore example with module parameters
rust: num: bounded: mark __new as unsafe
...
The hda/intel driver restricts the MSI message address for devices which do
not advertise full 64-bit DMA address space support to 32-bit due to the
former restrictions of the PCI/MSI code which only allowed either 32-bit or
a full 64-bit address range.
This does not work on platforms which have a MSI doorbell address above the
32-bit boundary but do not support the full 64 bit address range.
The PCI/MSI core converted this binary decision to a DMA_BIT_MASK() based
decision, which allows to describe the device limitations precisely.
Convert the driver to provide the exact DMA address limitations to the
PCI/MSI core. That allows devices which do not support the full 64-bit
address space to work on platforms which have a MSI doorbell address above
the 32-bit limit as long as it is within the hardware's addressable range.
[ tglx: Massage changelog ]
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20260129-pci-msi-addr-mask-v4-4-70da998f2750@iscas.ac.cn
The radeon driver restricts the MSI message address for devices older than
the BONAIR generation to 32-bit MSI addresses due to the former
restrictions of the PCI/MSI code which only allowed either 32-bit or full
64-bit address range.
This does not work on platforms which have a MSI doorbell address above the
32-bit boundary but do not support the full 64 bit address range.
The PCI/MSI core converted this binary decision to a DMA_BIT_MASK() based
decision, which allows to describe the device limitations precisely.
Convert the driver to provide the exact DMA address limitations to the
PCI/MSI core. That allows devices which do not support the full 64-bit
address space to work on platforms which have a MSI doorbell address above
the 32-bit limit as long as it is within the hardware's addressable range.
[ tglx: Massage changelog ]
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20260129-pci-msi-addr-mask-v4-3-70da998f2750@iscas.ac.cn
Instead of a 32-bit/64-bit dichotomy, check the MSI address against
the device specific address mask.
This allows platforms with an MSI doorbell address above the 32-bit limit
to work with devices without full 64-bit MSI address support, as long as
the doorbell is within the addressable range of the device.
[ tglx: Massaged changelog ]
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260129-pci-msi-addr-mask-v4-2-70da998f2750@iscas.ac.cn
Some PCI devices have PCI_MSI_FLAGS_64BIT in the MSI capability, but
implement less than 64 address bits. This breaks on platforms where such
a device is assigned an MSI address higher than what's supported.
Currently, no_64bit_msi bit is set for these devices, meaning that only
32-bit MSI addresses are allowed for them. However, on some platforms the
MSI doorbell address is above the 32-bit limit but within the addressable
range of the device.
As a first step to enable MSI on those combinations of devices and
platforms, convert the boolean no_64bit_msi flag to a DMA mask and fixup
the affected usage sites:
- no_64bit_msi = 1 -> msi_addr_mask = DMA_BIT_MASK(32)
- no_64bit_msi = 0 -> msi_addr_mask = DMA_BIT_MASK(64)
- if (no_64bit_msi) -> if (msi_addr_mask < DMA_BIT_MASK(64))
Since no values other than DMA_BIT_MASK(32) and DMA_BIT_MASK(64) are used,
this is functionally equivalent.
This prepares for changing the binary decision between 32 and 64 bit to a
DMA mask based decision which allows to support systems which have a DMA
address space less than 64bit but a MSI doorbell address above the 32-bit
limit.
[ tglx: Massaged changelog ]
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Brett Creeley <brett.creeley@amd.com> # ionic
Reviewed-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Takashi Iwai <tiwai@suse.de> # sound
Link: https://patch.msgid.link/20260129-pci-msi-addr-mask-v4-1-70da998f2750@iscas.ac.cn
This RTC has one "free" register which can be used to store arbitrary
data. Expose it as a nvmem resource in Linux.
Signed-off-by: Lorenz Brun <lorenz@monogon.tech>
Link: https://patch.msgid.link/20251223125728.346073-1-lorenz@monogon.tech
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The Loongson-2K0300's rtc hardware design is similar to that of the
Loongson-1B, but it does not support the alarm feature.
Introduce `LOONGSON_RTC_ALARM_WORKAROUND`, which indicates a chip that
does not support the alarm feature, and rewrite the related logic in
`loongson_rtc_alarm_setting()`.
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://patch.msgid.link/abff68dda2fe6a6601a9e58b31e278d941297fce.1768616276.git.zhoubinbin@loongson.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add "loongson,ls2k0300-rtc" dedicated compatible to represent the RTC
interface of the Loongson-2K0300 chip.
Its hardware design is similar to that of the Loongson-1B, but it does
not support the alarm feature.
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/0c6a4fd221b5bf05f06cae9bb543a5bf7ea59f57.1768616276.git.zhoubinbin@loongson.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The `interrupts` property indicates an RTC alarm interrupt, which is
required for RTCs that support the alarm feature, which is not supported
by the Loongson-1C RTC. We exclude it for a more accurate description.
Changing the `allowed` property is ABI-breaking behavior, but
throughout the existing Loongson DTS{i}, the description of the RTC
nodes conforms to the modified bingding rules.
Thus, the existing Loongson DTS{i} will not be affected.
Fixes: 487ef32cae ("dt-bindings: rtc: Split loongson,ls2x-rtc into SoC-based compatibles")
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/b6295c907410f6708115cba4df0959ee6629f8a5.1768616276.git.zhoubinbin@loongson.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The Renesas RZ/V2N (r9a09g056) RTC is identical to the RZ/V2H
(r9a09g057) variant. Add the compatible string for RZ/V2N and
extend the existing RZ/V2H reset configuration to cover both
variants.
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260125192706.27099-4-ovidiu.panait.rb@renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The IBI_SIR_REQ_REJECT register is a 32-bit bitmap indexed by the
dynamic address of each I3C slave. The DesignWare controller derives
the bit index by folding the 7-bit dynamic address into a 5-bit value,
using the sum of the lower 5 bits and the upper 2 bits, modulo 32.
The current implementation incorrectly uses the device table index
when updating the SIR reject mask, which can result in rejecting or
accepting IBIs for the wrong device.
Compute the SIR reject bit index directly from the dynamic address,
as defined by the controller specification, and use it consistently
when updating the reject mask.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/d4ad8161e604156c60327060ad3d339ebf18fe4f.1769479330.git.adrianhoyin.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Convert dw-i3c-master to use scoped spinlock guards in place of
open-coded spin_lock_irqsave()/spin_unlock_irqrestore() pairs to ensure
locks are always safely released on scope exit.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/79020c006c15dda9d057946530f16cfb4650d450.1769479330.git.adrianhoyin.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The dw_i3c_master_i2c_xfers() function allocates memory for the xfer
structure using dw_i3c_master_alloc_xfer(). If pm_runtime_resume_and_get()
fails, the function returns without freeing the allocated xfer, resulting
in a memory leak.
Add a dw_i3c_master_free_xfer() call to the error path to ensure the
allocated memory is properly freed.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 62fe9d06f5 ("i3c: dw: Add power management support")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260126081121.644099-1-zilin@seu.edu.cn
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Assign the driver PM operations pointer, which is necessary for the PCI
subsystem to put the device into a low power state. Refer to
pci_pm_suspend_noirq() which bails out if the pointer is NULL, before
it has the opportunity to call pci_prepare_to_sleep().
No other actions are necessary as the mipi-i3c-hci driver takes care of
controller state.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260123063325.8210-4-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add system suspend callbacks. Implement them by forcing runtime PM.
Consequently bail out if Runtime PM is not allowed.
On resume from System Suspend (suspend to RAM), rerun Dynamic Address
Assignment to restore addresses for devices that may have lost power.
On resume from System Hibernation (suspend to disk), use the new
i3c_master_do_daa_ext() helper with 'rstdaa' set to true, which
additionally handles the case where devices are assigned different dynamic
addresses after a hibernation boot.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260123063325.8210-3-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
After system hibernation, I3C Dynamic Addresses may be reassigned at boot
and no longer match the values recorded before suspend. Introduce
i3c_master_do_daa_ext() to handle this situation.
The restore procedure is straightforward: issue a Reset Dynamic Address
Assignment (RSTDAA), then run the standard DAA sequence. The existing DAA
logic already supports detecting and updating devices whose dynamic
addresses differ from previously known values.
Refactor the DAA path by introducing a shared helper used by both the
normal i3c_master_do_daa() path and the new extended restore function,
and correct the kernel-doc in the process.
Export i3c_master_do_daa_ext() so that master drivers can invoke it from
their PM restore callbacks.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260123063325.8210-2-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The devs_lock spinlock introduced when adding support for ibi:s was
never initialized.
Fixes: e389b1d72a ("i3c: dw: Add support for in-band interrupts")
Suggested-by: Jani Nurminen <jani.nurminen@windriver.com>
Signed-off-by: Fredrik Markstrom <fredrik.markstrom@est.tech>
Reviewed-by: Ivar Holmqvist <ivar.holmqvist@est.tech>
Link: https://patch.msgid.link/20260116-i3c_dw_initialize_spinlock-v3-1-cf707b6ed75f@est.tech
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
With SEV-TIO the low-level TSM driver is responsible for allocating a
Stream ID. The Stream ID needs to be unique within each IDE partner
port. Fix the Stream ID selection to reuse the host bridge stream
resource id which is a pool of 256 ids per host bridge on AMD platforms.
Otherwise, only one device per-host bridge can establish Selective
Stream IDE.
Fixes: 4be423572d ("crypto/ccp: Implement SEV-TIO PCIe IDE (phase1)")
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://patch.msgid.link/20260123053057.1350569-3-aik@amd.com
[djbw: clarify end user impact in changelog]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
The current number of streams in AMD TSM is 1 which is too little,
the core uses 255. Also, even if the module parameter is increased,
calling pci_ide_set_nr_streams() second time triggers WARN_ON.
Simplify the code by sticking to the PCI core defaults.
Fixes: 4be423572d ("crypto/ccp: Implement SEV-TIO PCIe IDE (phase1)")
Signed-off-by: Alexey Kardashevskiy <aik@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://patch.msgid.link/20260123053057.1350569-2-aik@amd.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
In order to do a user space stacktrace the current task needs to be a user
task that has executed in user space. It use to be possible to test if a
task is a user task or not by simply checking the task_struct mm field. If
it was non NULL, it was a user task and if not it was a kernel task.
But things have changed over time, and some kernel tasks now have their
own mm field.
An idea was made to instead test PF_KTHREAD and two functions were used to
wrap this check in case it became more complex to test if a task was a
user task or not[1]. But this was rejected and the C code simply checked
the PF_KTHREAD directly.
It was later found that not all kernel threads set PF_KTHREAD. The io-uring
helpers instead set PF_USER_WORKER and this needed to be added as well.
But checking the flags is still not enough. There's a very small window
when a task exits that it frees its mm field and it is set back to NULL.
If perf were to trigger at this moment, the flags test would say its a
user space task but when perf would read the mm field it would crash with
at NULL pointer dereference.
Now there are flags that can be used to test if a task is exiting, but
they are set in areas that perf may still want to profile the user space
task (to see where it exited). The only real test is to check both the
flags and the mm field.
Instead of making this modification in every location, create a new
is_user_task() helper function that does all the tests needed to know if
it is safe to read the user space memory or not.
[1] https://lore.kernel.org/all/20250425204120.639530125@goodmis.org/
Fixes: 90942f9fac ("perf: Use current->flags & PF_KTHREAD|PF_USER_WORKER instead of current->mm == NULL")
Closes: https://lore.kernel.org/all/0d877e6f-41a7-4724-875d-0b0a27b8a545@roeck-us.net/
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260129102821.46484722@gandalf.local.home
Andrea reported the dl_server getting stuck for him. He tracked it
down to a state where dl_server_start() saw dl_defer_running==1, but
the dl_server's job is no longer valid at the time of
dl_server_start().
In the state diagram this corresponds to [4] D->A (or dl_server_stop()
due to no more runnable tasks) followed by [1], which in case of a
lapsed deadline must then be A->B.
Now our A has dl_defer_running==1, while B demands
dl_defer_running==0, therefore it must get cleared when the CBS wakeup
rules demand a replenish.
Fixes: a110a81c52 ("sched/deadline: Deferrable dl server")
Reported-by: Andrea Righi arighi@nvidia.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Tested-by: Andrea Righi arighi@nvidia.com
Link: https://lkml.kernel.org/r/20260123161645.2181752-1-arighi@nvidia.com
Link: https://patch.msgid.link/20260130124100.GC1079264@noisy.programming.kicks-ass.net
Rework this code that was totally busted at least as of my most
recent changes. Introduce a separate list for delayed delegations
so that they can't get lost and don't clutter up the returns list.
Add a missing spin_unlock in the helper marking it as a regular
pending return.
Fixes: 0ebe655bd0 ("NFS: add a separate delegation return list")
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Drop the pointless delegation->lock held over setting multiple
atomic bits in different structures, and use separate labels
for the delay vs abort cases.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
This will allow to simplify the error handling flow.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
Replace the integer used as boolean with a bool type, and tidy up
the prototype and top of function comment.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
The caller doesn't check the return value, so drop it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
None of the callers checks the return value, so drop it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
The driver uses separate error printing and error returning at probe()
for locations where the error value is hard-coded and can't be
EPROBE_DEFER. This helps to omit the extra return value check which is
done in dev_err_probe().
Using the dev_err_probe() has some other benefits besides handling the
-EPROBE_DEFER though, like standardizing the print for error numbers.
Some believe thes outweigh the benefit of skipping the extra check.
Use dev_err_probe() consistently in the bd71828 power-supply probe.
Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://patch.msgid.link/aWi_GG74sZRfajA_@mva-rohm
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Jiri Olsa says:
====================
x86/fgraph,bpf: Fix ORC stack unwind from kprobe_multi
hi,
Mahe reported missing function from stack trace on top of kprobe multi
program. It turned out the latest fix [1] needs some more fixing.
v2 changes:
- keep the unwind same as for kprobes, attached function
is part of entry probe stacktrace, not kretprobe [Steven]
- several change in trigger bench [Andrii]
- added selftests for standard kprobes and fentry/fexit probes [Andrii]
Note I'll try to add similar stacktrace adjustment for fentry/fexit
in separate patchset to not complicate this change.
thanks,
jirka
[1] https://lore.kernel.org/bpf/20251104215405.168643-1-jolsa@kernel.org/
---
====================
Link: https://patch.msgid.link/20260126211837.472802-1-jolsa@kernel.org
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Adding support to call bpf_get_stackid helper from trigger programs,
so far added for kprobe multi.
Adding the --stacktrace/-g option to enable it.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260126211837.472802-7-jolsa@kernel.org
Adding test that attaches fentry/fexitand verifies the
ORC stacktrace matches expected functions.
The test is only for ORC unwinder to keep it simple.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260126211837.472802-6-jolsa@kernel.org
Adding test that attaches kprobe/kretprobe and verifies the
ORC stacktrace matches expected functions.
The test is only for ORC unwinder to keep it simple.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260126211837.472802-5-jolsa@kernel.org
