Define and advertise AMX CPUIDs (0x1E.0x1) to userspace when the leaf is
supported by the host.
Intel Diamond Rapids adds new AMX instructions to support new formats
and memory operations [*], and introduces the CPUID subleaf 0x1E.0x1
to centralize the discrete AMX feature bits within EAX.
Since these AMX features have no actual kernel usages, define them as
KVM-only features in reverse_cpuid.h.
In addition to the new features, CPUID 0x1E.0x1.EAX[bits 0-3] are
aliaseed positions of existing AMX feature bits distributed across the
0x7 leaves. To avoid duplicate feature names, name these aliases with an
*_ALIAS suffix, and define them in reverse_cpuid.h as KVM-only features
as well.
Advertise new CPUID subleaf 0x1E.0x1 with its AMX CPUID feature bits to
userspace for guest use. It's safe since no additional enabling work
is needed in the host kernel.
[*]: Intel Architecture Instruction Set Extensions and Future Features
(rev.059).
Tested-by: Xudong Hao <xudong.hao@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://patch.msgid.link/20251120050720.931449-3-zhao1.liu@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Define the feature flag for MOVRS and advertise support to userspace when
the feature is supported by the host.
MOVRS is a new set of instructions introduced in the Intel platform
Diamond Rapids, to provide load instructions that carry a read-shared
hint.
Functionally, MOVRS family is equivalent to existing load instructions,
but its read-shared hint indicates that the source memory location is
likely to become read-shared by multiple processors, i.e., read in the
future by at least one other processor before it is written (assuming it
is ever written in the future). This hint could optimize the behavior of
the caches, especially shared caches, for this data for future reads by
multiple processors. Additionally, MOVRS family also includes a software
prefetch instruction, PREFETCHRST2, that carries the same read-shared
hint. [*]
MOVRS family is enumerated by CPUID single-bit (0x7.0x1.EAX[bit 31]).
Since it's on a densely-populated CPUID leaf and some other bits on
this leaf have kernel usages, define this new feature in cpufeatures.h,
but hide it in /proc/cpuinfo due to lack of current kernel usage.
Advertise MOVRS bit to userspace directly. It's safe, since there's no
new VMX controls or additional host enabling required for guests to use
this feature.
[*]: Intel Architecture Instruction Set Extensions and Future Features
(rev.059).
Tested-by: Xudong Hao <xudong.hao@intel.com>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://patch.msgid.link/20251120050720.931449-2-zhao1.liu@intel.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
A collection of a few more small fixes for HD- and USB-audio,
including a regression fix for the OOB fix that was included in
the previous PR.
-----BEGIN PGP SIGNATURE-----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=MH0R
-----END PGP SIGNATURE-----
Merge tag 'sound-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of a few more small fixes for HD- and USB-audio,
including a regression fix for the OOB fix that was included
in the previous pull request"
* tag 'sound-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: ALC269 fixup for Lenovo Yoga Book 9i 13IRU8 audio
ALSA: hda/realtek: Add quirk for Samsung 730QED to fix headphone
ALSA: usb-audio: Use the right limit for PCM OOB check
ALSA: usb-audio: Fix use-after-free in snd_usb_mixer_free()
ALSA: hda/realtek: Fix headset mic for TongFang X6AR55xU
ALSA: ctxfi: Fix potential OOB access in audio mixer handling
selftests: ALSA: Remove unused variable in utimer-test
ALSA: usb-audio: Add delay quirk for MOONDROP Moonriver2 Ti
ALSA: scarlett2: Fix buffer overflow in config retrieval
ALSA: usb: Increase volume range that triggers a warning
The xchk_xfile_*_descr macros call kasprintf, which can fail to allocate
memory if the formatted string is larger than 16 bytes (or whatever the
nofail guarantees are nowadays). Some of them could easily exceed that,
and Jiaming Zhang found a few places where that can happen with syzbot.
The descriptions are debugging aids and aren't required to be unique, so
let's just pass in static strings and eliminate this path to failure.
Note this patch touches a number of commits, most of which were merged
between 6.6 and 6.14.
Cc: r772577952@gmail.com
Cc: <stable@vger.kernel.org> # v6.12
Fixes: ab97f4b1c0 ("xfs: repair AGI unlinked inode bucket lists")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jiaming Zhang <r772577952@gmail.com>
If we're trying to replace an xattr in a shortform attr structure and
the old entry fits the new entry, we can just memcpy and exit without
having to delete, compact, and re-add the entry (or worse use the attr
intent machinery). For parent pointers this only advantages renaming
where the filename length stays the same (e.g. mv autoexec.bat
scandisk.exe) but for regular xattrs it might be useful for updating
security labels and the like.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
After a recent fsmark benchmarking run, I observed that the overhead of
parent pointers on file creation and deletion can be a bit high. On a
machine with 20 CPUs, 128G of memory, and an NVME SSD capable of pushing
750000iops, I see the following results:
$ mkfs.xfs -f -l logdev=/dev/nvme1n1,size=1g /dev/nvme0n1 -n parent=0
meta-data=/dev/nvme0n1 isize=512 agcount=40, agsize=9767586 blks
= sectsz=4096 attr=2, projid32bit=1
= crc=1 finobt=1, sparse=1, rmapbt=1
= reflink=1 bigtime=1 inobtcount=1 nrext64=1
= exchange=0 metadir=0
data = bsize=4096 blocks=390703440, imaxpct=5
= sunit=0 swidth=0 blks
naming =version 2 bsize=4096 ascii-ci=0, ftype=1, parent=0
log =/dev/nvme1n1 bsize=4096 blocks=262144, version=2
= sectsz=4096 sunit=1 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
= rgcount=0 rgsize=0 extents
= zoned=0 start=0 reserved=0
So we created 40 AGs, one per CPU. Now we create 40 directories and run
fsmark:
$ time fs_mark -D 10000 -S 0 -n 100000 -s 0 -L 8 -d ...
# Version 3.3, 40 thread(s) starting at Wed Dec 10 14:22:07 2025
# Sync method: NO SYNC: Test does not issue sync() or fsync() calls.
# Directories: Time based hash between directories across 10000 subdirectories with 180 seconds per subdirectory.
# File names: 40 bytes long, (16 initial bytes of time stamp with 24 random bytes at end of name)
# Files info: size 0 bytes, written with an IO size of 16384 bytes per write
# App overhead is time in microseconds spent in the test not doing file writing related system calls.
parent=0 parent=1
================== ==================
real 0m57.573s real 1m2.934s
user 3m53.578s user 3m53.508s
sys 19m44.440s sys 25m14.810s
$ time rm -rf ...
parent=0 parent=1
================== ==================
real 0m59.649s real 1m12.505s
user 0m41.196s user 0m47.489s
sys 13m9.566s sys 20m33.844s
Parent pointers increase the system time by 28% overhead to create 32
million files that are totally empty. Removing them incurs a system
time increase of 56%. Wall time increases by 9% and 22%.
For most filesystems, each file tends to have a single owner and not
that many xattrs. If the xattr structure is shortform, then all xattr
changes are logged with the inode and do not require the the xattr
intent mechanism to persist the parent pointer.
Therefore, we can speed up parent pointer operations by calling the
shortform xattr functions directly if the child's xattr is in short
format. Now the overhead looks like:
$ time fs_mark -D 10000 -S 0 -n 100000 -s 0 -L 8 -d ...
parent=0 parent=1
================== ==================
real 0m58.030s real 1m0.983s
user 3m54.141s user 3m53.758s
sys 19m57.003s sys 21m30.605s
$ time rm -rf ...
parent=0 parent=1
================== ==================
real 0m58.911s real 1m4.420s
user 0m41.329s user 0m45.169s
sys 13m27.857s sys 15m58.564s
Now parent pointers only increase the system time by 8% for creation and
19% for deletion. Wall time increases by 5% and 9% now.
Close the performance gap by creating helpers for the attr set, remove,
and replace operations that will try to make direct shortform updates,
and fall back to the attr intent machinery if that doesn't work. This
works for regular xattrs and for parent pointers.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The dp parameter to this function is an alias of args->dp, so remove it
for clarity before we go adding new callers.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In debugging other problems with generic/753, it turns out that it's
possible for the system go to down in the middle of a remote xattr set
operation such that the leaf block entry is marked incomplete and
valueblk is set to zero. Make this no longer a failure.
Cc: <stable@vger.kernel.org> # v4.15
Fixes: 13791d3b83 ("xfs: scrub extended attribute leaf space")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
In the previous patches, we observed that it's possible for there to be
freemap entries with zero size but a nonzero base. This isn't an
inconsistency per se, but older kernels can get confused by this and
corrupt the block, leading to corruption.
If we see this, flag the xattr structure for optimization so that it
gets rebuilt.
Cc: <stable@vger.kernel.org> # v4.15
Fixes: 13791d3b83 ("xfs: scrub extended attribute leaf space")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Check for erroneous overlapping freemap regions and collisions between
freemap regions and the xattr leaf entry array.
Note that we must explicitly zero out the extra freemaps in
xfs_attr3_leaf_compact so that the in-memory buffer has a correctly
initialized freemap array to satisfy the new verification code, even if
subsequent code changes the contents before unlocking the buffer.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Replace all the open-coded callsites with a single static inline helper.
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
xfs/592 and xfs/794 both trip this assertion in the leaf block freemap
adjustment code after ~20 minutes of running on my test VMs:
ASSERT(ichdr->firstused >= ichdr->count * sizeof(xfs_attr_leaf_entry_t)
+ xfs_attr3_leaf_hdr_size(leaf));
Upon enabling quite a lot more debugging code, I narrowed this down to
fsstress trying to set a local extended attribute with namelen=3 and
valuelen=71. This results in an entry size of 80 bytes.
At the start of xfs_attr3_leaf_add_work, the freemap looks like this:
i 0 base 448 size 0 rhs 448 count 46
i 1 base 388 size 132 rhs 448 count 46
i 2 base 2120 size 4 rhs 448 count 46
firstused = 520
where "rhs" is the first byte past the end of the leaf entry array.
This is inconsistent -- the entries array ends at byte 448, but
freemap[1] says there's free space starting at byte 388!
By the end of the function, the freemap is in worse shape:
i 0 base 456 size 0 rhs 456 count 47
i 1 base 388 size 52 rhs 456 count 47
i 2 base 2120 size 4 rhs 456 count 47
firstused = 440
Important note: 388 is not aligned with the entries array element size
of 8 bytes.
Based on the incorrect freemap, the name area starts at byte 440, which
is below the end of the entries array! That's why the assertion
triggers and the filesystem shuts down.
How did we end up here? First, recall from the previous patch that the
freemap array in an xattr leaf block is not intended to be a
comprehensive map of all free space in the leaf block. In other words,
it's perfectly legal to have a leaf block with:
* 376 bytes in use by the entries array
* freemap[0] has [base = 376, size = 8]
* freemap[1] has [base = 388, size = 1500]
* the space between 376 and 388 is free, but the freemap stopped
tracking that some time ago
If we add one xattr, the entries array grows to 384 bytes, and
freemap[0] becomes [base = 384, size = 0]. So far, so good. But if we
add a second xattr, the entries array grows to 392 bytes, and freemap[0]
gets pushed up to [base = 392, size = 0]. This is bad, because
freemap[1] hasn't been updated, and now the entries array and the free
space claim the same space.
The fix here is to adjust all freemap entries so that none of them
collide with the entries array. Note that this fix relies on commit
2a2b5932db ("xfs: fix attr leaf header freemap.size underflow") and
the previous patch that resets zero length freemap entries to have
base = 0.
Cc: <stable@vger.kernel.org> # v2.6.12
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Back in commit 2a2b5932db ("xfs: fix attr leaf header freemap.size
underflow"), Brian Foster observed that it's possible for a small
freemap at the end of the end of the xattr entries array to experience
a size underflow when subtracting the space consumed by an expansion of
the entries array. There are only three freemap entries, which means
that it is not a complete index of all free space in the leaf block.
This code can leave behind a zero-length freemap entry with a nonzero
base. Subsequent setxattr operations can increase the base up to the
point that it overlaps with another freemap entry. This isn't in and of
itself a problem because the code in _leaf_add that finds free space
ignores any freemap entry with zero size.
However, there's another bug in the freemap update code in _leaf_add,
which is that it fails to update a freemap entry that begins midway
through the xattr entry that was just appended to the array. That can
result in the freemap containing two entries with the same base but
different sizes (0 for the "pushed-up" entry, nonzero for the entry
that's actually tracking free space). A subsequent _leaf_add can then
allocate xattr namevalue entries on top of the entries array, leading to
data loss. But fixing that is for later.
For now, eliminate the possibility of confusion by zeroing out the base
of any freemap entry that has zero size. Because the freemap is not
intended to be a complete index of free space, a subsequent failure to
find any free space for a new xattr will trigger block compaction, which
regenerates the freemap.
It looks like this bug has been in the codebase for quite a long time.
Cc: <stable@vger.kernel.org> # v2.6.12
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Sinc commit 79a6d1bfe1 ("can: gs_usb: gs_usb_receive_bulk_callback():
unanchor URL on usb_submit_urb() error") a failing resubmit URB will print
an info message.
In the case of a short read where netdev has not yet been assigned,
initialize as NULL to avoid dereferencing an undefined value. Also report
the error value of the failed resubmit.
Fixes: 79a6d1bfe1 ("can: gs_usb: gs_usb_receive_bulk_callback(): unanchor URL on usb_submit_urb() error")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/all/20260119181904.1209979-1-kuba@kernel.org/
Link: https://patch.msgid.link/20260120-gs_usb-fix-error-message-v1-1-6be04de572bc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Introduce a new command for KVM_MEMORY_ENCRYPT_OP ioctl that can be used
to enable fetching of endorsement key certificates from userspace via
the new KVM_EXIT_SNP_REQ_CERTS exit type. Also introduce a new
KVM_X86_SEV_SNP_REQ_CERTS KVM device attribute so that userspace can
query whether the kernel supports the new command/exit.
Suggested-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Tested-by: Liam Merwick <liam.merwick@oracle.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Link: https://patch.msgid.link/20260109231732.1160759-3-michael.roth@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
For SEV-SNP, the host can optionally provide a certificate table to the
guest when it issues an attestation request to firmware (see GHCB 2.0
specification regarding "SNP Extended Guest Requests"). This certificate
table can then be used to verify the endorsement key used by firmware to
sign the attestation report.
While it is possible for guests to obtain the certificates through other
means, handling it via the host provides more flexibility in being able
to keep the certificate data in sync with the endorsement key throughout
host-side operations that might resulting in the endorsement key
changing.
In the case of KVM, userspace will be responsible for fetching the
certificate table and keeping it in sync with any modifications to the
endorsement key by other userspace management tools. Define a new
KVM_EXIT_SNP_REQ_CERTS event where userspace is provided with the GPA of
the buffer the guest has provided as part of the attestation request so
that userspace can write the certificate data into it while relying on
filesystem-based locking to keep the certificates up-to-date relative to
the endorsement keys installed/utilized by firmware at the time the
certificates are fetched.
[Melody: Update the documentation scheme about how file locking is
expected to happen.]
Reviewed-by: Liam Merwick <liam.merwick@oracle.com>
Tested-by: Liam Merwick <liam.merwick@oracle.com>
Tested-by: Dionna Glaze <dionnaglaze@google.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Melody Wang <huibo.wang@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Link: https://patch.msgid.link/20260109231732.1160759-2-michael.roth@amd.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Drop the sanity check in kvm_apic_accept_events() that attempts to detect
KVM bugs by asserting that a vCPU isn't in Wait-For-SIPI if INIT/SIPI are
blocked, because if INIT is blocked, then it should be impossible for a
vCPU to get into WFS in the first place. Unfortunately, syzbot is smarter
than KVM (and its maintainers), and circumvented the guards put in place
by commit 0fe3e8d804 ("KVM: x86: Move INIT_RECEIVED vs. INIT/SIPI blocked
check to KVM_RUN") by swapping the order and stuffing VMXON after INIT, and
then triggering kvm_apic_accept_events() by way of KVM_GET_MP_STATE.
Simply drop the WARN as it hasn't detected any meaningful KVM bugs in
years (if ever?), and preventing userspace from clobbering guest state is
generally a non-goal. More importantly, fully closing the hole would
likely require enforcing some amount of ordering in KVM's ioctls, which is
a much bigger risk than simply deleting the WARN.
Reported-by: syzbot+59f2c3a3fc4f6c09b8cd@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/6925da1b.a70a0220.d98e3.00b0.GAE@google.com
Link: https://patch.msgid.link/20260123022816.2283567-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
xe:
- Disallow bind-queue sharing across multiple VMs
- Fix xe userptr in the absence of CONFIG_DEVICE_PRIVATE
- Fix a missed page count update
- Fix a confused argument to alloc_workqueue()
- Kernel-doc fixes
- Disable a workaround on VFs
- Fix a job lock assert
- Update wedged.mode only after successful reset policy change
- Select CONFIG_DEVICE_PRIVATE when DRM_XE_GPUSVM is selected
amdgpu:
- fix color pipeline string leak
- GC 12 fix
- Misc error path fixes
- DC analog fix
- SMU 6 fixes
- TLB flush fix
- DC idle optimization fix
amdkfd:
- GC 11 cooperative launch fix
imagination:
- sync wait for logtype update completion to ensure FW trace is
available
bridge/synopsis:
- Fix error paths in dw_dp_bind
nouveau:
- Add and implement missing DSB connector types, and improve unknown
connector handling.
- Set missing atomic function ops.
intel:
- place 3D lut at correct place in pipeline
- fix color pipeline string leak
vkms:
- fix color pipeline string leak
mediatek:
- Fix platform_get_irq() error checking
- HDMI DDC v2 driver fixes
- dpi: Find next bridge during probe
- mtk_gem: Partial refactor and use drm_gem_dma_object
- dt-bindings: Fix typo 'hardwares' to 'hardware'
-----BEGIN PGP SIGNATURE-----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=Ur9f
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2026-01-23' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie:
"Probably a good thing you decided to do an rc8 in this round. Nothing
stands out, but xe/amdgpu and mediatek all have a bunch of fixes, and
then there are a few other single patches. Hopefully next week is
calmer for release.
xe:
- Disallow bind-queue sharing across multiple VMs
- Fix xe userptr in the absence of CONFIG_DEVICE_PRIVATE
- Fix a missed page count update
- Fix a confused argument to alloc_workqueue()
- Kernel-doc fixes
- Disable a workaround on VFs
- Fix a job lock assert
- Update wedged.mode only after successful reset policy change
- Select CONFIG_DEVICE_PRIVATE when DRM_XE_GPUSVM is selected
amdgpu:
- fix color pipeline string leak
- GC 12 fix
- Misc error path fixes
- DC analog fix
- SMU 6 fixes
- TLB flush fix
- DC idle optimization fix
amdkfd:
- GC 11 cooperative launch fix
imagination:
- sync wait for logtype update completion to ensure FW trace
is available
bridge/synopsis:
- Fix error paths in dw_dp_bind
nouveau:
- Add and implement missing DSB connector types, and improve
unknown connector handling
- Set missing atomic function ops
intel:
- place 3D lut at correct place in pipeline
- fix color pipeline string leak
vkms:
- fix color pipeline string leak
mediatek:
- Fix platform_get_irq() error checking
- HDMI DDC v2 driver fixes
- dpi: Find next bridge during probe
- mtk_gem: Partial refactor and use drm_gem_dma_object
- dt-bindings: Fix typo 'hardwares' to 'hardware'"
* tag 'drm-fixes-2026-01-23' of https://gitlab.freedesktop.org/drm/kernel: (38 commits)
Revert "drm/amd/display: pause the workload setting in dm"
drm/xe: Select CONFIG_DEVICE_PRIVATE when DRM_XE_GPUSVM is selected
drm, drm/xe: Fix xe userptr in the absence of CONFIG_DEVICE_PRIVATE
drm/i915/display: Fix color pipeline enum name leak
drm/vkms: Fix color pipeline enum name leak
drm/amd/display: Fix color pipeline enum name leak
drm/i915/color: Place 3D LUT after CSC in plane color pipeline
drm/nouveau/disp: Set drm_mode_config_funcs.atomic_(check|commit)
drm/nouveau: implement missing DCB connector types; gracefully handle unknown connectors
drm/nouveau: add missing DCB connector types
drm/amdgpu: fix type for wptr in ring backup
drm/amdgpu: Fix validating flush_gpu_tlb_pasid()
drm/amd/pm: Workaround SI powertune issue on Radeon 430 (v2)
drm/amd/pm: Don't clear SI SMC table when setting power limit
drm/amd/pm: Fix si_dpm mmCG_THERMAL_INT setting
drm/xe: Update wedged.mode only after successful reset policy change
drm/xe/migrate: fix job lock assert
drm/xe/uapi: disallow bind queue sharing
drm/amd/display: Only poll analog connectors
drm/amdgpu: fix error handling in ib_schedule()
...
Some distributions (such as Ubuntu) configure GCC so that
_FORTIFY_SOURCE is automatically enabled at -O1 or above. This results
in some fortified version of definitions of standard library functions
are included. While linker resolves the symbols, the fortified versions
might override the definitions in lib/string_override.c and reference to
those PLT entries in GLIBC. This is not a problem for the code in host,
but it is a disaster for the guest code. E.g., if build and run
x86/nested_emulation_test on Ubuntu 24.04 will encounter a L1 #PF due to
memset() reference to __memset_chk@plt.
The option -fno-builtin-memset is not helpful here, because those
fortified versions are not built-in but some definitions which are
included by header, they are for different intentions.
In order to eliminate the unpredictable behaviors may vary depending on
the linker and platform, add the "-U_FORTIFY_SOURCE" into CFLAGS to
prevent from introducing the fortified definitions.
Signed-off-by: Zhiquan Li <zhiquan_li@163.com>
Link: https://patch.msgid.link/20260122053551.548229-1-zhiquan_li@163.com
Fixes: 6b6f71484b ("KVM: selftests: Implement memcmp(), memcpy(), and memset() for guest use")
Cc: stable@vger.kernel.org
[sean: tag for stable]
Signed-off-by: Sean Christopherson <seanjc@google.com>
On the embedded platform, certain critical data, such as IMU data, is
transmitted through UART. The tty_flip_buffer_push() interface in the TTY
layer uses system_dfl_wq to handle the flipping of the TTY buffer.
Although the unbound workqueue can create new threads on demand and wake
up the kworker thread on an idle CPU, it may be preempted by real-time
tasks or other high-prio tasks.
flush_to_ldisc() needs to wake up the relevant data handle thread. When
executing __wake_up_common_lock(), it calls spin_lock_irqsave(), which
does not disable preemption but disables migration in RT-Linux. This
prevents the kworker thread from being migrated to other cores by CPU's
balancing logic, resulting in long delays. The call trace is as follows:
__wake_up_common_lock
__wake_up
ep_poll_callback
__wake_up_common
__wake_up_common_lock
__wake_up
n_tty_receive_buf_common
n_tty_receive_buf2
tty_ldisc_receive_buf
tty_port_default_receive_buf
flush_to_ldisc
In our system, the processing interval for each frame of IMU data
transmitted via UART can experience significant jitter due to this issue.
Instead of the expected 10 to 15 ms frame processing interval, we see
spikes up to 30 to 35 ms. Moreover, in just one or two hours, there can
be 2 to 3 occurrences of such high jitter, which is quite frequent. This
jitter exceeds the software's tolerable limit of 20 ms.
Introduce flip_wq in tty_port which can be set by tty_port_link_wq() or as
default linked to default workqueue allocated when tty_register_driver().
The default workqueue is allocated with flag WQ_SYSFS, so that cpumask and
nice can be set dynamically. The execution timing of tty_port_link_wq() is
not clearly restricted. The newly added function tty_port_link_driver_wq()
checks whether the flip_wq of the tty_port has already been assigned when
linking the default tty_driver's workqueue to the port. After the user has
set a custom workqueue for a certain tty_port using tty_port_link_wq(), the
system will only use this custom workqueue, even if tty_driver does not
have %TTY_DRIVER_CUSTOM_WORKQUEUE flag.
Introduce %TTY_DRIVER_CUSTOM_WORKQUEUE flag meaning not to create the
default single tty_driver workqueue. Two reasons why need to introduce the
%TTY_DRIVER_CUSTOM_WORKQUEUE flag:
1. If the WQ_SYSFS parameter is enabled, workqueue_sysfs_register() will
fail when trying to create a workqueue with the same name. The pty is an
example of this; if both CONFIG_LEGACY_PTYS and CONFIG_UNIX98_PTYS are
enabled, the call to tty_register_driver() in unix98_pty_init() will fail.
2. Different tty ports may be used for different tasks, which may require
separate core binding control via workqueues. In this case, the workqueue
created by default in the tty driver is unnecessary. Enabling this flag
prevents the creation of this redundant workqueue.
After applying this patch, we can set the related UART TTY flip buffer
workqueue by sysfs. We set the cpumask to CPU cores associated with the
IMU tasks, and set the nice to -20. Testing has shown significant
improvement in the previously described issue, with almost no stuttering
occurring anymore.
Signed-off-by: Xin Zhao <jackzxcui1989@163.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://patch.msgid.link/20251223034836.2625547-1-jackzxcui1989@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As comments mentioned this is old (and actually deprecated) interface
to set custom baud rates. This interface has limitations as it only
allows to set a single opaque value called "custom_divisor". If the HW
needs more complex settings (like fractional divisor) it must somehow
encode this. This is horrid interface that is very driver specific
and not flexible. Meanwhile Linux has established way to set free
baud rate settings via BOTHER [1]. With all this being said, remove
deprecated interface for good.
Link: https://stackoverflow.com/questions/12646324/how-can-i-set-a-custom-baud-rate-on-linux [1]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260122102349.2395423-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As comments mentioned this is old (and actually deprecated) interface
to set custom baud rates. This interface has limitations as it only
allows to set a single opaque value called "custom_divisor". If the HW
needs more complex settings (like fractional divisor) it must somehow
encode this. This is horrid interface that is very driver specific
and not flexible. Meanwhile Linux has established way to set free
baud rate settings via BOTHER [1]. With all this being said, remove
deprecated interface for good.
Link: https://stackoverflow.com/questions/12646324/how-can-i-set-a-custom-baud-rate-on-linux [1]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20260122102349.2395423-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add SCIF binding documentation for Renesas RZ/G3L SoC. SCIF block on the
RZ/G3L is identical to one found on the RZ/G3S SoC.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://patch.msgid.link/20260120125232.349708-2-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In TI K3 SoCs, I/O daisy chaining is used to allow wakeup from UART when the
UART controller is off. Set UART device as wakeup capable using out-of-band
wakeup if the 'wakeup' pinctrl state exists and the device may wakeup.
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Kendall Willis <k-willis@ti.com>
Link: https://patch.msgid.link/20260116-uart-wakeup-v2-1-0078ae9996e4@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Revert commit bfc467db60 ("serial: remove redundant
tty_port_link_device()") because the tty_port_link_device() is not
redundant: the tty->port has to be confured before we call
uart_configure_port(), otherwise user-space can open console without TTY
linked to the driver.
This tty_port_link_device() was added explicitly to avoid this exact
issue in commit fb2b90014d ("tty: link tty and port before configuring
it as console"), so offending commit basically reverted the fix saying
it is redundant without addressing the actual race condition presented
there.
Reproducible always as tty->port warning on Qualcomm SoC with most of
devices disabled, so with very fast boot, and one serial device being
the console:
printk: legacy console [ttyMSM0] enabled
printk: legacy console [ttyMSM0] enabled
printk: legacy bootconsole [qcom_geni0] disabled
printk: legacy bootconsole [qcom_geni0] disabled
------------[ cut here ]------------
tty_init_dev: ttyMSM driver does not set tty->port. This would crash the kernel. Fix the driver!
WARNING: drivers/tty/tty_io.c:1414 at tty_init_dev.part.0+0x228/0x25c, CPU#2: systemd/1
Modules linked in: socinfo tcsrcc_eliza gcc_eliza sm3_ce fuse ipv6
CPU: 2 UID: 0 PID: 1 Comm: systemd Tainted: G S 6.19.0-rc4-next-20260108-00024-g2202f4d30aa8 #73 PREEMPT
Tainted: [S]=CPU_OUT_OF_SPEC
Hardware name: Qualcomm Technologies, Inc. Eliza (DT)
...
tty_init_dev.part.0 (drivers/tty/tty_io.c:1414 (discriminator 11)) (P)
tty_open (arch/arm64/include/asm/atomic_ll_sc.h:95 (discriminator 3) drivers/tty/tty_io.c:2073 (discriminator 3) drivers/tty/tty_io.c:2120 (discriminator 3))
chrdev_open (fs/char_dev.c:411)
do_dentry_open (fs/open.c:962)
vfs_open (fs/open.c:1094)
do_open (fs/namei.c:4634)
path_openat (fs/namei.c:4793)
do_filp_open (fs/namei.c:4820)
do_sys_openat2 (fs/open.c:1391 (discriminator 3))
...
Starting Network Name Resolution...
Apparently the flow with this small Yocto-based ramdisk user-space is:
driver (qcom_geni_serial.c): user-space:
============================ ===========
qcom_geni_serial_probe()
uart_add_one_port()
serial_core_register_port()
serial_core_add_one_port()
uart_configure_port()
register_console()
|
| open console
| ...
| tty_init_dev()
| driver->ports[idx] is NULL
|
tty_port_register_device_attr_serdev()
tty_port_link_device() <- set driver->ports[idx]
Fixes: bfc467db60 ("serial: remove redundant tty_port_link_device()")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://patch.msgid.link/20260123072139.53293-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for HSIC USB mode, which can be set for second USB controller
and PHY on Tegra SoC along with already supported UTMI or ULPI.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://patch.msgid.link/20260122151125.7367-3-clamor95@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor to directly use enum usb_phy_interface to determine the PHY mode.
This change is in preparation for adding support for HSIC mode.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Link: https://patch.msgid.link/20260122151125.7367-2-clamor95@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The mode selection sequence is initiated by the driver after all partner
alternate modes have been successfully registered.
When a partner is disconnected, the driver also stops the mode selection
process and releases resources via `typec_mode_selection_delete`.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260119131824.2529334-8-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the ucsi port driver supports modes selection, it should implement
`add_partner_altmodes` and `remove_partner_altmodes` ucsi operations. With
these operations the driver can manage the mode selection process.
Once partner altmodes are registered, `add_partner_altmodes` is called to
start the mode selection. When the partner is unregistered,
`remove_partner_altmodes` is supposed to stop any ongoing processes and
clean up the resources.
`typec_altmode_state_update` informes mode selection about the current mode
of the Type-C connector.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260119131824.2529334-7-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The port driver sets this bit for an alternate mode description to indicate
support for the mode selection feature. Once set, individual Alt Mode
drivers will no longer attempt to activate their respective modes within
their probe functions. This prevents race conditions and non-prioritized
activation.
The bit is not set by default. If left unset, the system retains the
current behavior where Alt Mode drivers manage their own activation logic.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260119131824.2529334-6-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The mode selection process is controlled by the following API functions,
which allow to initiate and complete mode entry based on the priority of
each mode:
`typec_mode_selection_start` function compiles a priority list of supported
Alternate Modes.
`typec_altmode_state_update` function is invoked by the port driver to
communicate the current mode of the Type-C connector.
`typec_mode_selection_delete` function stops the currently running mode
selection process and releases all associated system resources.
`mode_selection_work_fn` task attempts to activate modes. The process stops
on success; otherwise, it proceeds to the next mode after a timeout or
error.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260119131824.2529334-5-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces a priority sysfs attribute to the USB Type-C
alternate mode port interface. This new attribute allows user-space to
configure the numeric priority of alternate modes managing their preferred
order of operation. If a new priority value conflicts with an existing
mode's priority, the priorities of the conflicting mode and all subsequent
modes are automatically incremented to ensure uniqueness.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260119131824.2529334-4-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This flag specifies that the Embedded Controller (EC) must receive explicit
approval from the Application Processor (AP) before initiating Type-C
alternate modes or USB4 mode.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://patch.msgid.link/20260119131824.2529334-3-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This new field in the port properties dictates whether the Platform Policy
Manager (PPM) allows the OS Policy Manager (OPM) to change the currently
active, negotiated alternate mode.
Signed-off-by: Andrei Kuchynski <akuchynski@chromium.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Benson Leung <bleung@chromium.org>
Link: https://patch.msgid.link/20260119131824.2529334-2-akuchynski@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The generic USB PHY driver uses the existence of the "clocks" property
to see if a clock is optional or not. Use devm_clk_get_optional()
instead, which exists for this purpose. As usb_phy_generic.clk is now
either a valid clock pointer or NULL, and all clock operations handle
NULL pointers gracefully, several IS_ERR() checks can be removed,
simplifying the code.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
...
Link: https://patch.msgid.link/5cc21d821edf5d40f56a74cd251bb1b982876b72.1769004444.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
bdc_run() can be ran during atomic context leading to a sleep during
atomic warning. Fix this by replacing read_poll_timeout() with
read_poll_timeout_atomic().
Fixes: 75ae051efc ("usb: gadget: bdc: use readl_poll_timeout() to simplify code")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260120200754.2488765-1-justin.chen@broadcom.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add dbc_manufacturer sysfs attribute to allow changing the manufacturer
description presented by the debug device when a host requests a string
descriptor with iManufacturer index.
Value can only be changed while debug capability (DbC) is in disabled
state to prevent USB device descriptor change while connected to a USB
host.
The default value is "Linux Foundation".
The string length can be from 1 to 126 characters.
String is terminated at null or newline, driver does not support empty
string.
[ mn: Improve commit message and sysfs entry documentation ]
Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260120181148.128712-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add dbc_product sysfs attribute to allow changing the product description
presented by the debug device when a host requests a string descriptor
with iProduct index.
Value can only be changed while debug capability (DbC) is in disabled
state to prevent USB device descriptor change while connected to a USB
host.
The default value is "Linux USB Debug Target".
The field length can be from 1 to 126 characters.
String is terminated at null or newline, driver does not support empty
string.
[ mn: Improve commit message and sysfs entry documentation ]
Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260120181148.128712-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add dbc_serial sysfs attribute to allow changing the serial number
string descriptor presented by the debug device when a host requests a
string descriptor with iSerialNumber index.
Value can only be changed while debug capability (DbC) is in disabled
state to prevent USB device descriptor change while connected to a USB
host.
The default value is "0001".
The field length can be from 1 to 126 characters.
String is terminated at null or newline, driver does not support empty
string.
[ mn: Improve commit message and sysfs entry documentation ]
Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260120181148.128712-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reorganize the code to prepare ground for setting serial number,
product and manufacturer names through sysfs. This commit:
1. Introduces new buffers for storing serial number, product and
manufacturer name in utf8. The buffers will be used by sysfs
*_show and *_store functions.
2. Increases USB string descriptor data maximum length to the
value from USB specification (126 bytes of data).
3. Adds new helper functions get_str_desc_len, prepare_len
and xhci_dbc_populate_str_desc.
Signed-off-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260120181148.128712-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For systems where the ID pin isn't available as gpio use the ATTACHED_STATE
register instead to control vbus.
>From the datasheet:
"This is an additional method to communicate attach other
than the ID pin. These bits can be read by the application to
determine what was attached."
Use this method if id-gpios property is not set, but the connector node
has vbus-supply defined.
Signed-off-by: Jan Remmet <j.remmet@phytec.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260115-wip-jremmet-hd3ss3220_vbus-v1-1-b7d9adfbe346@phytec.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The platform_get_irq_byname() function already prints an error message
internally upon failure using dev_err_probe(). Therefore, the explicit
dev_err() is redundant and results in duplicate error logs.
Remove the redundant dev_err() call to clean up the error path.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://patch.msgid.link/20260115023800.4142416-1-nichen@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We found that calling irq_dispose_mapping() caused a kernel warning
when removing the driver. The IRQs are obtained using
platform_get_irq(), which returns a Linux virtual IRQ number directly
managed by the device core, not by the OF subsystem. Therefore, the
driver should not call irq_dispose_mapping() for these IRQs.
Fixes: 5df186e2ef ("usb: xhci: tegra: Support USB wakeup function for Tegra234")
Cc: stable@vger.kernel.org
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Wei-Cheng Chen <weichengc@nvidia.com>
Link: https://patch.msgid.link/20260115103621.587366-1-weichengc@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Mukesh fixes a typo in comments.
- Thadeu adds support for built-in dfl driver.
- Michal changes his email.
- Romain corrects the error handling when an fpga bridge is missing.
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
-----BEGIN PGP SIGNATURE-----
iIkEABYIADEWIQSgSJpClIeaArXyudb8twOBpKCM2gUCaXHsnRMceWlsdW4ueHVA
aW50ZWwuY29tAAoJEPy3A4GkoIzarvoA/Rv2fTtQfd6rgebgoY90/jKk2TL2YyVX
ySd2JE8eEFtrAQCVnnG9JmjTkqHQtwT5pNeigFSrtELxaJUGl7WT/XnwBA==
=JBAR
-----END PGP SIGNATURE-----
Merge tag 'fpga-for-v6.20-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga into char-misc-next
Xu writes:
FPGA Manager changes for 6.20-rc1
- Mukesh fixes a typo in comments.
- Thadeu adds support for built-in dfl driver.
- Michal changes his email.
- Romain corrects the error handling when an fpga bridge is missing.
All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of our for-next branch).
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
* tag 'fpga-for-v6.20-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/fpga/linux-fpga:
fpga: dfl: fix typo in header file
fpga: dfl: use subsys_initcall to allow built-in drivers to be added
fpga: xilinx: Switch Michal Simek's email to new one
fpga: of-fpga-region: Fail if any bridge is missing
Some pinned importers, such as non-ODP RDMA ones, cannot invalidate their
mappings and therefore must be prevented from attaching to this exporter.
Fixes: 5d74781ebc ("vfio/pci: Add dma-buf export support for MMIO regions")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20260121-vfio-add-pin-v1-1-4e04916b17f1@nvidia.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
