This is a trivial change with no functional effect which replaces the
pattern:
if (a) {
if (b) {
do_stuff();
}
}
with:
if (a && b) {
do_stuff();
};
The purpose is to reduce the delta of a subsequent functional change.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260119121954.1624535-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean says:
====================
PHY polarity inversion via generic device tree properties
Using the "rx-polarity" and "tx-polarity" device tree properties
introduced in linux-phy and merged into net-next in
commit 96a2d53f24 ("Merge tag 'phy_common_properties' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy")
we convert here two existing networking use cases - the EN8811H Ethernet
PHY and the Mediatek LynxI PCS.
Original cover letter:
Polarity inversion (described in patch 4/10) is a feature with at least
4 potential new users waiting for a generic description:
- Horatiu Vultur with the lan966x SerDes
- Daniel Golle with the MaxLinear GSW1xx switches
- Bjørn Mork with the AN8811HB Ethernet PHY
- Me with a custom SJA1105 board, switch which uses the DesignWare XPCS
I became interested in exploring the problem space because I was averse
to the idea of adding vendor-specific device tree properties to describe
a common need.
This set contains an implementation of a generic feature that should
cater to all known needs that were identified during my documentation
phase.
Apart from what is converted here, we also have the following, which I
did not touch:
- "st,px_rx_pol_inv" - its binding is a .txt file and I don't have time
for such a large detour to convert it to dtschema.
- "st,pcie-tx-pol-inv" and "st,sata-tx-pol-inv" - these are defined in a
.txt schema but are not implemented in any driver. My verdict would be
"delete the properties" but again, I would prefer not introducing such
dependency to this series.
====================
Link: https://patch.msgid.link/20260119091220.1493761-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prefer the new "rx-polarity" and "tx-polarity" properties, which in this
case have the advantage that polarity inversion can be specified per
direction (and per protocol, although this isn't useful here).
We use the vendor specific ones as fallback if the standard description
doesn't exist.
Daniel, referring to the Mediatek SDK, clarifies that the combined
SGMII_PN_SWAP_TX_RX register field should be split like this: bit 0 is
TX and bit 1 is RX:
https://lore.kernel.org/linux-phy/aSW--slbJWpXK0nv@makrotopia.org/
Suggested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260119091220.1493761-6-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Mediatek LynxI PCS is used from the MT7530 DSA driver (where it does
not have an OF presence) and from mtk_eth_soc, where it does
(Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml
informs of a combined clock provider + SGMII PCS "SGMIISYS" syscon
block).
Currently, mtk_eth_soc parses the SGMIISYS OF node for the
"mediatek,pnswap" property and sets a bit in the "flags" argument of
mtk_pcs_lynxi_create() if set.
I'd like to deprecate "mediatek,pnswap" in favour of a property which
takes the current phy-mode into consideration. But this is only known at
mtk_pcs_lynxi_config() time, and not known at mtk_pcs_lynxi_create(),
when the SGMIISYS OF node is parsed.
To achieve that, we must pass the OF node of the PCS, if it exists, to
mtk_pcs_lynxi_create(), and let the PCS take a reference on it and
handle property parsing whenever it wants.
Use the fwnode API which is more general than OF (in case we ever need
to describe the PCS using some other format). This API should be NULL
tolerant, so add no particular tests for the mt7530 case.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20260119091220.1493761-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reference the common PHY properties, and update the example to use them.
Note that a PCS subnode exists, and it seems a better container of the
polarity description than the SGMIISYS node that hosts "mediatek,pnswap".
So use that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260119091220.1493761-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Prefer the new "rx-polarity" and "tx-polarity" properties, and use the
vendor specific ones as fallback if the standard description doesn't
exist.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20260119091220.1493761-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reference the common PHY properties, and update the example to use them.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260119091220.1493761-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We need to apply the tx_chan_offset to the netfilter cfg channel or the
output channel will be incorrect for asp-3.0 and newer.
Fixes: e9f31435ee ("net: bcmasp: Add support for asp-v3.0")
Signed-off-by: Justin Chen <justin.chen@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260120192339.2031648-1-justin.chen@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
gro: inline tcp6_gro_{receive,complete}
On some platforms, GRO stack is too deep and causes cpu stalls.
Decreasing call depths by one shows a 1.5 % gain on Zen2 cpus.
(32 RX queues, 100Gbit NIC, RFS enabled, tcp_rr with 128 threads and 10,000 flows)
We can go further by inlining ipv6_gro_{receive,complete}
and take care of IPv4 if there is interest.
Note: two temporary __always_inline will be replaced with
inline_for_performance when/if available.
Cumulative size increase for this series (of 3):
$ scripts/bloat-o-meter -t vmlinux.0 vmlinux.3
add/remove: 2/2 grow/shrink: 5/1 up/down: 1572/-471 (1101)
Function old new delta
ipv6_gro_receive 1069 1846 +777
ipv6_gro_complete 433 733 +300
tcp6_check_fraglist_gro - 272 +272
tcp6_gro_complete 227 306 +79
tcp4_gro_complete 325 397 +72
ipv6_offload_init 218 274 +56
__pfx_tcp6_check_fraglist_gro - 16 +16
__pfx___skb_incr_checksum_unnecessary 32 - -32
__skb_incr_checksum_unnecessary 186 - -186
tcp6_gro_receive 959 706 -253
Total: Before=22592724, After=22593825, chg +0.00%
====================
Link: https://patch.msgid.link/20260120164903.1912995-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
FDO/LTO are unable to inline tcp6_gro_receive() from ipv6_gro_receive()
Make sure tcp6_check_fraglist_gro() is only called only when needed,
so that compiler can leave it out-of-line.
$ scripts/bloat-o-meter -t vmlinux.1 vmlinux.2
add/remove: 2/0 grow/shrink: 3/1 up/down: 1123/-253 (870)
Function old new delta
ipv6_gro_receive 1069 1846 +777
tcp6_check_fraglist_gro - 272 +272
ipv6_offload_init 218 274 +56
__pfx_tcp6_check_fraglist_gro - 16 +16
ipv6_gro_complete 433 435 +2
tcp6_gro_receive 959 706 -253
Total: Before=22592662, After=22593532, chg +0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260120164903.1912995-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
clang does not inline this helper in GRO fast path.
We can save space and cpu cycles.
$ scripts/bloat-o-meter -t vmlinux.0 vmlinux.1
add/remove: 0/2 grow/shrink: 2/0 up/down: 156/-218 (-62)
Function old new delta
tcp6_gro_complete 227 311 +84
tcp4_gro_complete 325 397 +72
__pfx___skb_incr_checksum_unnecessary 32 - -32
__skb_incr_checksum_unnecessary 186 - -186
Total: Before=22592724, After=22592662, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260120164903.1912995-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After 3cbf4ffba5 ("net: plumb network namespace into __skb_flow_dissect")
we have to provide a net pointer to __skb_flow_dissect(),
either via skb->dev, skb->sk, or a user provided pointer.
In the following case, syzbot was able to cook a bare skb.
WARNING: net/core/flow_dissector.c:1131 at __skb_flow_dissect+0xb57/0x68b0 net/core/flow_dissector.c:1131, CPU#1: syz.2.1418/11053
Call Trace:
<TASK>
bond_flow_dissect drivers/net/bonding/bond_main.c:4093 [inline]
__bond_xmit_hash+0x2d7/0xba0 drivers/net/bonding/bond_main.c:4157
bond_xmit_hash_xdp drivers/net/bonding/bond_main.c:4208 [inline]
bond_xdp_xmit_3ad_xor_slave_get drivers/net/bonding/bond_main.c:5139 [inline]
bond_xdp_get_xmit_slave+0x1fd/0x710 drivers/net/bonding/bond_main.c:5515
xdp_master_redirect+0x13f/0x2c0 net/core/filter.c:4388
bpf_prog_run_xdp include/net/xdp.h:700 [inline]
bpf_test_run+0x6b2/0x7d0 net/bpf/test_run.c:421
bpf_prog_test_run_xdp+0x795/0x10e0 net/bpf/test_run.c:1390
bpf_prog_test_run+0x2c7/0x340 kernel/bpf/syscall.c:4703
__sys_bpf+0x562/0x860 kernel/bpf/syscall.c:6182
__do_sys_bpf kernel/bpf/syscall.c:6274 [inline]
__se_sys_bpf kernel/bpf/syscall.c:6272 [inline]
__x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:6272
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xec/0xf80 arch/x86/entry/syscall_64.c:94
Fixes: 58deb77cc5 ("bonding: balance ICMP echoes in layer3+4 mode")
Reported-by: syzbot+c46409299c70a221415e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/696faa23.050a0220.4cb9c.001f.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Matteo Croce <mcroce@redhat.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260120161744.1893263-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both send_mcast4() and send_mcast6() use sleep 2 to wait for the tunnel
connection between the gateway and the relay, and for the listener
socket to be created in the LISTENER namespace.
However, tests sometimes fail because packets are sent before the
connection is fully established.
Increase the waiting time to make the tests more reliable, and use
wait_local_port_listen() to explicitly wait for the listener socket.
Fixes: c08e8baea7 ("selftests: add amt interface selftest script")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://patch.msgid.link/20260120133930.863845-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We can change tcp_rsk() and inet_rsk() to propagate their argument
const qualifier thanks to container_of_const().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260120125353.1470456-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the parameter pmac_id_valid argument of be_cmd_get_mac_from_list() is
set to false, the driver may request the PMAC_ID from the firmware of the
network card, and this function will store that PMAC_ID at the provided
address pmac_id. This is the contract of this function.
However, there is a location within the driver where both
pmac_id_valid == false and pmac_id == NULL are being passed. This could
result in dereferencing a NULL pointer.
To resolve this issue, it is necessary to pass the address of a stub
variable to the function.
Fixes: 95046b927a ("be2net: refactor MAC-addr setup code")
Signed-off-by: Andrey Vatoropin <a.vatoropin@crpt.ru>
Link: https://patch.msgid.link/20260120113734.20193-1-a.vatoropin@crpt.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lorenzo Bianconi says:
====================
airoha: Add the capability to read firmware binary names from dts for Airoha NPU driver
This patch is needed because NPU firmware binaries are board specific since
they depend on the MediaTek WiFi chip used on the board (e.g. MT7996 or
MT7992). This is a preliminary patch to enable MT76 NPU offloading if
the Airoha SoC is equipped with MT7996 (Eagle) WiFi chipset.
====================
Link: https://patch.msgid.link/20260120-airoha-npu-firmware-name-v4-0-88999628b4c1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce the capability to read the firmware binary names from device-tree
using the firmware-name property if available.
This patch is needed because NPU firmware binaries are board specific since
they depend on the MediaTek WiFi chip used on the board (e.g. MT7996 or
MT7992) and the WiFi chip version info is not available in the NPU driver.
This is a preliminary patch to enable MT76 NPU offloading if the Airoha SoC
is equipped with MT7996 (Eagle) WiFi chipset.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260120-airoha-npu-firmware-name-v4-2-88999628b4c1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add firmware-name property in order to introduce the capability to
specify the firmware names used for 'RiscV core' and 'Data section'
binaries. This patch is needed because NPU firmware binaries are board
specific since they depend on the MediaTek WiFi chip used on the board
(e.g. MT7996 or MT7992) and the WiFi chip version info is not available
in the NPU driver. This is a preliminary patch to enable MT76 NPU
offloading if the Airoha SoC is equipped with MT7996 (Eagle) WiFi chipset.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20260120-airoha-npu-firmware-name-v4-1-88999628b4c1@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Include gvt/display_helpers.h so that the display register macros in
intel_gvt_mmio_table.c expand through the exported display functions.
This lets us keep the existing macro calls while avoiding direct
access to display internals, helping the display modularization work.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260114025456.1639171-1-ankit.k.nautiyal@intel.com
Andre Carvalho says:
====================
netconsole: support automatic target recovery
This patchset introduces target resume capability to netconsole allowing
it to recover targets when underlying low-level interface comes back
online.
The patchset starts by refactoring netconsole state representation in
order to allow representing deactivated targets (targets that are
disabled due to interfaces unregister).
It then modifies netconsole to handle NETDEV_REGISTER events for such
targets, setups netpoll and forces the device UP. Targets are matched with
incoming interfaces depending on how they were bound in netconsole
(by mac or interface name). For these reasons, we also attempt resuming
on NETDEV_CHANGENAME.
The patchset includes a selftest that validates netconsole target state
transitions and that target is functional after resumed.
====================
Link: https://patch.msgid.link/20260118-netcons-retrigger-v11-0-4de36aebcf48@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce a new netconsole selftest to validate that netconsole is able
to resume a deactivated target when the low level interface comes back.
The test setups the network using netdevsim, creates a netconsole target
and then remove/add netdevsim in order to bring the same interfaces
back. Afterwards, the test validates that the target works as expected.
Targets are created via cmdline parameters to the module to ensure that
we are able to resume targets that were bound by mac and interface name.
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260118-netcons-retrigger-v11-7-4de36aebcf48@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Attempt to resume a previously deactivated target when the associated
interface comes back (NETDEV_REGISTER) or when it changes name
(NETDEV_CHANGENAME) by calling netpoll_setup on the device.
Depending on how the target was setup (by mac or interface name), the
corresponding field is compared with the device being brought up. Targets
that match the incoming device, are scheduled for resume on a workqueue.
Resuming happens on a workqueue as we can't execute netpoll_setup in the
context of the netdev event. A standalone workqueue (as opposed to the
global one) is used to allow for proper cleanup process during
netconsole module cleanup as we need to be able to flush all pending
work before traversing the target list given that targets are temporarily
removed from the list during resume_target.
Target transitions to STATE_DISABLED in case of failures resuming it to
avoid retrying the same target indefinitely.
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260118-netcons-retrigger-v11-6-4de36aebcf48@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit introduces two helper functions to perform lock/unlock on
dynamic_netconsole_mutex providing no-op stub versions when compiled
without CONFIG_NETCONSOLE_DYNAMIC and refactors existing call sites to
use the new helpers.
This is done following kernel coding style guidelines, in preparation
for an upcoming change. It avoids the need for preprocessor conditionals
in the call site and keeps the logic easier to follow.
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260118-netcons-retrigger-v11-5-4de36aebcf48@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch makes sure netconsole clears dev_name for devices bound by mac
in order to allow calling setup_netpoll on targets that have previously
been cleaned up (in order to support resuming deactivated targets).
This is required as netpoll_setup populates dev_name even when devices are
matched via mac address. The cleanup is done inside netconsole as bound
by mac is a netconsole concept.
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260118-netcons-retrigger-v11-4-4de36aebcf48@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the low level interface brings a netconsole target down, record this
using a new STATE_DEACTIVATED state. This allows netconsole to distinguish
between targets explicitly disabled by users and those deactivated due to
interface state changes.
It also enables automatic recovery and re-enabling of targets if the
underlying low-level interfaces come back online.
From a code perspective, anything that is not STATE_ENABLED is disabled.
Devices (de)enslaving are marked STATE_DISABLED to prevent automatically
resuming as enslaved interfaces cannot have netconsole enabled.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260118-netcons-retrigger-v11-3-4de36aebcf48@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch refactors the netconsole driver's target enabled state from a
simple boolean to an explicit enum (`target_state`).
This allow the states to be expanded to a new state in the upcoming
change.
Co-developed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260118-netcons-retrigger-v11-2-4de36aebcf48@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduces a enum to track netconsole target state which is going to
replace the enabled boolean.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Tested-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260118-netcons-retrigger-v11-1-4de36aebcf48@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit eeecf5d3a3.
This change lead to MHI WWAN device can't connect to internet.
I found a netwrok issue with kernel 6.19-rc4, but network works
well with kernel 6.18-rc1. After checking, this commit is the
root cause.
Before appliing this serial changes on MHI WWAN network, we shall
revert this change in case of v6.19 being impacted.
Fixes: eeecf5d3a3 ("net: wwan: mhi_wwan_mbim: Avoid -Wflex-array-member-not-at-end warning")
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Link: https://patch.msgid.link/20260120072018.29375-1-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Suraj Gupta says:
====================
Add devm_clk_bulk_get_optional_enable() helper and use in AXI Ethernet driver
This patch series introduces a new managed clock framework helper function
and demonstrates its usage in AXI ethernet driver.
Device drivers frequently need to get optional bulk clocks, prepare them,
and enable them during probe, while ensuring automatic cleanup on device
unbind. Currently, this requires three separate operations with manual
cleanup handling.
The new devm_clk_bulk_get_optional_enable() helper combines these
operations into a single managed call, eliminating boilerplate code and
following the established pattern of devm_clk_bulk_get_all_enabled().
====================
Link: https://patch.msgid.link/20260116192725.972966-1-suraj.gupta2@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Transition axienet_probe() to managed resource allocation using devm_*
APIs for network device and clock handling, while improving error paths
with dev_err_probe(). This eliminates the need for manual resource
cleanup during probe failures and streamlines the remove() function.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Co-developed-by: Suraj Gupta <suraj.gupta2@amd.com>
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Link: https://patch.msgid.link/20260116192725.972966-3-suraj.gupta2@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new managed clock framework helper function that combines getting
optional bulk clocks and enabling them in a single operation.
The devm_clk_bulk_get_optional_enable() function simplifies the common
pattern where drivers need to get optional bulk clocks, prepare and enable
them, and have them automatically disabled/unprepared and freed when the
device is unbound.
This new API follows the established pattern of
devm_clk_bulk_get_all_enabled() and reduces boilerplate code in drivers
that manage multiple optional clocks.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Suraj Gupta <suraj.gupta2@amd.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://patch.msgid.link/20260116192725.972966-2-suraj.gupta2@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This fixes transmit power too low under 2GHz connection. Previously
we missed the settings of 2GHz, add the according calibrated tables.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260117044157.2392958-10-pkshih@realtek.com
Enable force MBA (Multi-user Block Ack) field to ensure trasnmiting
packet of duration field of MBA in multi-user block ack request is 0
as expected.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260117044157.2392958-9-pkshih@realtek.com
The data TX FIFO operation (DTOP) is a hardware component in TMAC circuit
to control TX flow, since CID7090 variant can clear DTOP by default, no
need it by driver.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260117044157.2392958-8-pkshih@realtek.com
TSSI is to do TX compensation caused by temperature. The RTL8922D defines
different H2C command format. Update it accordingly.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260117044157.2392958-7-pkshih@realtek.com
Before this change the rtw89_phy_edcca_log routine didn't handled
RTL8922D. This update expands the logic to recognize RTL8922D EDCCA
reports.
Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260117044157.2392958-5-pkshih@realtek.com
Introduce support for a new PS multi-link common info version (v1)
for RTL8922D, enabling the driver to send detailed RX gain and link
parameters to firmware via a new H2C command.
A dedicated 20 MHz beacon channel (chan_bcn) that replicates the primary
channel and band type of the original channel but forces a 20 MHz width.
This ensures that beacon mode always reference the 20 MHz gain table,
fixing the mis-assignment that could degrade signal strength or cause
incorrect RSSI calibration.
Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260117044157.2392958-4-pkshih@realtek.com
Introduce support for processing the new PS C2H report, enabling
detailed debugging of low-power state hardware changes.
Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260117044157.2392958-3-pkshih@realtek.com
In PS mode, it needs to restore RX gain settings while waking up. Add to
get RX gain values from chip specific ops, and pass these data to firmware
when going to enter PS mode.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260117044157.2392958-2-pkshih@realtek.com
In __print_txpwr_map(), memory is allocated to bufp via vzalloc().
If max_valid_addr is 0, the function returns -EOPNOTSUPP immediately
without freeing bufp, leading to a memory leak.
Since the validation of max_valid_addr does not depend on the allocated
memory, fix this by moving the vzalloc() call after the check.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 036042e157 ("wifi: rtw89: debug: txpwr table supports Wi-Fi 7 chips")
Suggested-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260116130834.1413924-1-zilin@seu.edu.cn
During MLO connections, A1 of the probe responses we received are
in link address, these frames will then be dropped by mac80211 due to
not matching the MLD address in ieee80211_scan_accept_presp().
Fix this by using MLD address to scan when not using random MAC address.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260114013950.19704-13-pkshih@realtek.com
Modify the power register range based on chip ability. When not set, the
default value is random. This fixes incorrect power limit on some ICs.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260114013950.19704-12-pkshih@realtek.com
BB wrapper is a hardware circuit to control TX power, and for single
writing it needs an additional flush to ensure writing is properly
completed.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260114013950.19704-10-pkshih@realtek.com
Set DBW by rate to on in TPU (TX Power Unit) init, and extend to
initialize two hardware bands.
Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260114013950.19704-8-pkshih@realtek.com
BB wrap registers are to configure TX power in MAC register domain, but
they are controlled and designed by BB layer. Since coming chips use
different register address, add a struct to define them.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260114013950.19704-7-pkshih@realtek.com
