USB4 v2 link used in peer-to-peer networking is symmetric 80Gbps so in
order to support reading this link speed, add support for it to ethtool.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260115115646.328898-3-mika.westerberg@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jamal Hadi Salim says:
====================
net/sched: teql: Enforce hierarchy placement
GangMin Kim <km.kim1503@gmail.com> managed to create a UAF on qfq by inserting
teql as a child qdisc and exploiting a qlen sync issue.
teql is not intended to be used as a child qdisc. Lets enforce that rule in
patch #1. Although patch #1 fixes the issue, we prevent another potential qlen
exploit in qfq in patch #2 by enforcing the child's active status is not
determined by inspecting the qlen. In patch #3 we add a tdc test case.
====================
Link: https://patch.msgid.link/20260114160243.913069-1-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a selftest that attempts to add a teql qdisc as a qfq child.
Since teql _must_ be added as a root qdisc, the kernel should reject
this.
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
Link: https://patch.msgid.link/20260114160243.913069-4-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is more of a preventive patch to make the code more consistent and
to prevent possible exploits that employ child qlen manipulations on qfq.
use cl_is_active instead of relying on the child qdisc's qlen to determine
class activation.
Fixes: 462dbc9101 ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost")
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260114160243.913069-3-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Design intent of teql is that it is only supposed to be used as root qdisc.
We need to check for that constraint.
Although not important, I will describe the scenario that unearthed this
issue for the curious.
GangMin Kim <km.kim1503@gmail.com> managed to concot a scenario as follows:
ROOT qdisc 1:0 (QFQ)
├── class 1:1 (weight=15, lmax=16384) netem with delay 6.4s
└── class 1:2 (weight=1, lmax=1514) teql
GangMin sends a packet which is enqueued to 1:1 (netem).
Any invocation of dequeue by QFQ from this class will not return a packet
until after 6.4s. In the meantime, a second packet is sent and it lands on
1:2. teql's enqueue will return success and this will activate class 1:2.
Main issue is that teql only updates the parent visible qlen (sch->q.qlen)
at dequeue. Since QFQ will only call dequeue if peek succeeds (and teql's
peek always returns NULL), dequeue will never be called and thus the qlen
will remain as 0. With that in mind, when GangMin updates 1:2's lmax value,
the qfq_change_class calls qfq_deact_rm_from_agg. Since the child qdisc's
qlen was not incremented, qfq fails to deactivate the class, but still
frees its pointers from the aggregate. So when the first packet is
rescheduled after 6.4 seconds (netem's delay), a dangling pointer is
accessed causing GangMin's causing a UAF.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: GangMin Kim <km.kim1503@gmail.com>
Tested-by: Victor Nogueira <victor@mojatatu.com>
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://patch.msgid.link/20260114160243.913069-2-jhs@mojatatu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ivan Vecera says:
====================
dpll: support mode switching
This series adds support for switching the working mode (automatic vs
manual) of a DPLL device via netlink.
Currently, the DPLL subsystem allows userspace to retrieve the current
working mode but lacks the mechanism to configure it. Userspace is also
unaware of which modes a specific device actually supports, as it
currently assumes only the active mode is supported.
The series addresses these limitations by:
1. Introducing .supported_modes_get() callback to allow drivers to report
all modes capable of running on the device.
2. Introducing .mode_set() callback and updating the netlink policy
to allow userspace to request a mode change.
3. Implementing these callbacks in the zl3073x driver, enabling dynamic
switching between automatic and manual modes.
====================
Link: https://patch.msgid.link/20260114122726.120303-1-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for .supported_modes_get() and .mode_set() callbacks
to enable switching between manual and automatic modes via netlink.
Implement .supported_modes_get() to report available modes based
on the current hardware configuration:
* manual mode is always supported
* automatic mode is supported unless the dpll channel is configured
in NCO (Numerically Controlled Oscillator) mode
Implement .mode_set() to handle the specific logic required when
transitioning between modes:
1) Transition to manual:
* If a valid reference is currently active, switch the hardware
to ref-lock mode (force lock to that reference).
* If no reference is valid and the DPLL is unlocked, switch to freerun.
* Otherwise, switch to Holdover.
2) Transition to automatic:
* If the currently selected reference pin was previously marked
as non-selectable (likely during a previous manual forcing
operation), restore its priority and selectability in the hardware.
* Switch the hardware to Automatic selection mode.
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Prathosh Satish <Prathosh.Satish@microchip.com>
Link: https://patch.msgid.link/20260114122726.120303-4-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, userspace can retrieve the DPLL working mode but cannot
configure it. This prevents changing the device operation, such as
switching from manual to automatic mode and vice versa.
Add a new callback .mode_set() to struct dpll_device_ops. Extend
the netlink policy and device-set command handling to process
the DPLL_A_MODE attribute. Update the netlink YAML specification
to include the mode attribute in the device-set operation.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260114122726.120303-3-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the DPLL subsystem assumes that the only supported mode is
the one currently active on the device. When dpll_msg_add_mode_supported()
is called, it relies on ops->mode_get() and reports that single mode
to userspace. This prevents users from discovering other modes the device
might be capable of.
Add a new callback .supported_modes_get() to struct dpll_device_ops. This
allows drivers to populate a bitmap indicating all modes supported by
the hardware.
Update dpll_msg_add_mode_supported() to utilize this new callback:
* if ops->supported_modes_get is defined, use it to retrieve the full
bitmap of supported modes.
* if not defined, fall back to the existing behavior: retrieve
the current mode via ops->mode_get and set the corresponding bit
in the bitmap.
Finally, iterate over the bitmap and add a DPLL_A_MODE_SUPPORTED netlink
attribute for every set bit, accurately reporting the device's capabilities
to userspace.
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Link: https://patch.msgid.link/20260114122726.120303-2-ivecera@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set CLK_OPS_PARENT_ENABLE to ensure the parent gets prepared and enabled
when switching to it.
Fixes: e3c13e0caa ("clk: qcom: dispcc-sm7150: Fix dispcc_mdss_pclk0_clk_src")
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20260117-sm7150-dispcc-fix-v1-1-2f39966bcad2@ixit.cz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add CoreSight DT nodes for AOSS, QDSS, CDSP, and Modem blocks to enable
the STM and TPDM sources to route trace data to the ETF for debugging.
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251120-add-coresight-nodes-for-pakala-v3-1-03bb7651bc90@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
QUP devices are currently marked with opp-shared in their OPP table,
causing the kernel to treat them as part of a shared OPP domain. This
leads to the qcom_geni_serial driver failing to probe with error
-EBUSY (-16).
Remove the opp-shared property to ensure the OPP framework treats the
QUP OPP table as device-specific, allowing the serial driver to probe
successfully
Fixes: f6746dc9e3 ("arm64: dts: qcom: qcs615: Add QUPv3 configuration")
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251111170350.525832-1-viken.dadhaniya@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The watchdog support in EL1 is SBSA compliant, handled by Gunyah
hypervisor, but in EL2. the watchdog is an instance of the APSS WDT HW
block, same as older platforms. So describe the APSS WDT node and mark
it as reserved, as it will only be enabled in EL2 overlay.
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251224-arm64-dts-qcom-x1e80100-el2-add-apss-wdt-v3-2-1801c55d2883@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document the compatible for the X1E80100 platform to the Qualcomm watchdog
binding. The HW implementation is compatible with the KPSS WDT.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251224-arm64-dts-qcom-x1e80100-el2-add-apss-wdt-v3-1-1801c55d2883@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Currently the Proximity Sensor doesn't work, but light sensor does.
Left the proximity sensor as a TODO for later.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Rudraksha Gupta <guptarud@gmail.com>
Link: https://lore.kernel.org/r/20251124-expressatt_nfc_accel_magn_light-v4-2-9c5686ad67e2@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the CCI where the camera modules are connected to, and add a node
for the EEPROM found next to the IMX363 rear camera.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Link: https://lore.kernel.org/r/20251028-msm8953-cci-v2-7-b5f9f7135326@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the definitions for a few fixed regulators found on the Fairphone 3.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Link: https://lore.kernel.org/r/20251028-msm8953-cci-v2-6-b5f9f7135326@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Follow the Devicetree Sources Coding Style and sort the pinctrl nodes by
the pins property. This makes it simpler to add new pinctrl states in
the future.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Link: https://lore.kernel.org/r/20251028-msm8953-cci-v2-4-b5f9f7135326@lucaweiss.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEn/sM2K9nqF/8FWzzDHRl3/mQkZwFAmlql18THG1rbEBwZW5n
dXRyb25peC5kZQAKCRAMdGXf+ZCRnLugB/99YE/TQM9Kwr3BPl4/BoNM+kiNyT4s
C7PK4PJIVnlTQBbp3hLTWpnU1Hyjmd1bRd5QY4/Ue3YfE06mj4v5MvXt7kQYdNP8
jpEU5JZleykE8qxrMR35CiBTbXLf6GeXd5AdDQd4PaAUmZyjPgzGQFkJOdP0DfB/
zTDrjZye2uOAj/d/6K5HSCXwZhjik65VIwj4bWFVTru+YypjRMs19qZgBybINlPn
b5fVdbsK+d0vxSeLN9goKRqHVsyl4UCANXLri3k1I34b1wScGOeezydo09eQnbMZ
MPhDpYDuhCuzBiti7P0X7UcjY1Y+hiKqsAYsvZmp+q916cDa7I97cakR
=I14Q
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.19-20260116' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2026-01-16
The first patch is by me and sets the missing CAN device default
capabilities in the CAN device layer.
The next patch is by me, target the gs_usb driver and adds the missing
unanchor URB on usb_submit_urb() error.
The last 5 patches are also from me and fix the same USB-URB leak (as
in the gs_usb driver) in the affected CAN-USB driver: ems_usb,
esd_usb, kvaser_usb, mcba_usb and usb_8dev.
* tag 'linux-can-fixes-for-6.19-20260116' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: usb_8dev: usb_8dev_read_bulk_callback(): fix URB memory leak
can: mcba_usb: mcba_usb_read_bulk_callback(): fix URB memory leak
can: kvaser_usb: kvaser_usb_read_bulk_callback(): fix URB memory leak
can: esd_usb: esd_usb_read_bulk_callback(): fix URB memory leak
can: ems_usb: ems_usb_read_bulk_callback(): fix URB memory leak
can: gs_usb: gs_usb_receive_bulk_callback(): unanchor URL on usb_submit_urb() error
can: dev: alloc_candev_mqs(): add missing default CAN capabilities
====================
Link: https://patch.msgid.link/20260116200323.366877-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RX flowid programming initializes the TCAM mask to all ones, but
then overwrites it when clearing the MAC DA mask bits. This results
in losing the intended initialization and may affect other match fields.
Update the code to clear the MAC DA bits using an AND operation, making
the handling of mask[0] consistent with mask[1], where the field-specific
bits are cleared after initializing the mask to ~0ULL.
Fixes: 57d00d4364 ("octeontx2-pf: mcs: Match macsec ethertype along with DMAC")
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://patch.msgid.link/20260116164724.2733511-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Following warning is encountered when building selftests on powerpc/32.
CC csum
csum.c: In function 'recv_get_packet_csum_status':
csum.c:710:50: warning: format '%lu' expects argument of type 'long unsigned int', but argument 4 has type 'size_t' {aka 'unsigned int'} [-Wformat=]
710 | error(1, 0, "cmsg: len=%lu expected=%lu",
| ~~^
| |
| long unsigned int
| %u
711 | cm->cmsg_len, CMSG_LEN(sizeof(struct tpacket_auxdata)));
| ~~~~~~~~~~~~
| |
| size_t {aka unsigned int}
csum.c:710:63: warning: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'unsigned int' [-Wformat=]
710 | error(1, 0, "cmsg: len=%lu expected=%lu",
| ~~^
| |
| long unsigned int
| %u
cm->cmsg_len has type __kernel_size_t and CMSG() macro has the type
returned by sizeof() which is size_t.
size_t is 'unsigned int' on some platforms and 'unsigned long' on
other ones so use %zu instead of %lu.
The code in question was introduced by
commit 91a7de8560 ("selftests/net: add csum offload test").
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/8b69b40826553c1dd500d9d25e45883744f3f348.1768556791.git.chleroy@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexander Sverdlin says:
====================
dsa: mxl-gsw1xx: Support R(G)MII slew rate configuration
Maxlinear GSW1xx switches offer slew rate configuration bits for R(G)MII
interface. The default state of the configuration bits is "normal", while
"slow" can be used to reduce the radiated emissions. Add the support for
the latter option into the driver as well as the new DT bindings.
====================
Link: https://patch.msgid.link/20260114104509.618984-1-alexander.sverdlin@siemens.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Support newly introduced maxlinear,slew-rate-txc and
maxlinear,slew-rate-txd device tree properties to configure R(G)MII
interface pins' slew rate. It might be used to reduce the radiated
emissions.
Reviewed-by: Daniel Golle <daniel@makrotopia.org>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20260114104509.618984-3-alexander.sverdlin@siemens.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add new maxlinear,slew-rate-txc and maxlinear,slew-rate-txd uint32
properties. The properties are only applicable for ports in R(G)MII mode
and allow for slew rate reduction in comparison to "normal" default
configuration with the purpose to reduce radiated emissions.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260114104509.618984-2-alexander.sverdlin@siemens.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If rxrpc_recvmsg() fails because MSG_DONTWAIT was specified but the call at
the front of the recvmsg queue already has its mutex locked, it requeues
the call - whether or not the call is already queued. The call may be on
the queue because MSG_PEEK was also passed and so the call was not dequeued
or because the I/O thread requeued it.
The unconditional requeue may then corrupt the recvmsg queue, leading to
things like UAFs or refcount underruns.
Fix this by only requeuing the call if it isn't already on the queue - and
moving it to the front if it is already queued. If we don't queue it, we
have to put the ref we obtained by dequeuing it.
Also, MSG_PEEK doesn't dequeue the call so shouldn't call
rxrpc_notify_socket() for the call if we didn't use up all the data on the
queue, so fix that also.
Fixes: 540b1c48c3 ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg")
Reported-by: Faith <faith@zellic.io>
Reported-by: Pumpkin Chang <pumpkin@devco.re>
Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Marc Dionne <marc.dionne@auristor.com>
cc: Nir Ohfeld <niro@wiz.io>
cc: Willy Tarreau <w@1wt.eu>
cc: Simon Horman <horms@kernel.org>
cc: linux-afs@lists.infradead.org
cc: stable@kernel.org
Link: https://patch.msgid.link/95163.1768428203@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Any queue_limits_start_update() call must be followed either by a
queue_limits_commit_update() call or by a queue_limits_cancel_update()
call. Make sure that the error path near the start of
disk_update_zone_resources() follows this requirement. Remove the
"goto unfreeze" statement from that error path to make the code easier
to verify.
This was detected by annotating the queue_limits_*() calls with Clang
thread-safety attributes and by building the kernel with thread-safety
checking enabled. Without this patch and with thread-safety checking
enabled, the following error is reported:
block/blk-zoned.c:2020:1: error: mutex 'disk->queue->limits_lock' is not held on every path through here [-Werror,-Wthread-safety-analysis]
2020 | }
| ^
block/blk-zoned.c:1959:8: note: mutex acquired here
1959 | lim = queue_limits_start_update(q);
| ^
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Fixes: bba4322e3f ("block: freeze queue when updating zone resources")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20260114192803.4171847-3-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Dmitry Skorodumov says:
====================
ipvlan: addrs_lock made per port
First patch fixes a rather minor issues that sometimes
ipvlan-addrs are modified without lock (because
for IPv6 addr can be sometimes added without RTNL)
====================
Link: https://patch.msgid.link/20260112142417.4039566-1-skorodumov.dmitry@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a simple ipvtap test to test handling
IP-address add/remove on ipvlan interface.
It creates a veth-interface and then creates several
network-namespace with ipvlan0 interface in it linked to veth.
Then it starts to add/remove addresses on ipvlan0 interfaces
in several threads.
At finish, it checks that there is no duplicated addresses.
Signed-off-by: Dmitry Skorodumov <skorodumov.dmitry@huawei.com>
Link: https://patch.msgid.link/20260112142417.4039566-3-skorodumov.dmitry@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make the addrs_lock be per port, not per ipvlan dev.
Initial code seems to be written in the assumption,
that any address change must occur under RTNL.
But it is not so for the case of IPv6. So
1) Introduce per-port addrs_lock.
2) It was needed to fix places where it was forgotten
to take lock (ipvlan_open/ipvlan_close)
This appears to be a very minor problem though.
Since it's highly unlikely that ipvlan_add_addr() will
be called on 2 CPU simultaneously. But nevertheless,
this could cause:
1) False-negative of ipvlan_addr_busy(): one interface
iterated through all port->ipvlans + ipvlan->addrs
under some ipvlan spinlock, and another added IP
under its own lock. Though this is only possible
for IPv6, since looks like only ipvlan_addr6_event() can be
called without rtnl_lock.
2) Race since ipvlan_ht_addr_add(port) is called under
different ipvlan->addrs_lock locks
This should not affect performance, since add/remove IP
is a rare situation and spinlock is not taken on fast
paths.
Fixes: 8230819494 ("ipvlan: use per device spinlock to protect addrs list updates")
Signed-off-by: Dmitry Skorodumov <skorodumov.dmitry@huawei.com>
Reviewed-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20260112142417.4039566-2-skorodumov.dmitry@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
ipv6: more data-race annotations
Inspired by one unrelated syzbot report.
This series adds missing (and boring) data-race annotations in IPv6.
Only the first patch adds sysctl_ipv6_flowlabel group
to speedup ip6_make_flowlabel() a bit.
====================
Link: https://patch.msgid.link/20260115094141.3124990-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sysctls are read while their values can change,
add READ_ONCE() annotations.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260115094141.3124990-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Following four sysctls can change under us, add missing READ_ONCE().
- ipv6.sysctl.max_dst_opts_len
- ipv6.sysctl.max_dst_opts_cnt
- ipv6.sysctl.max_hbh_opts_len
- ipv6.sysctl.max_hbh_opts_cnt
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260115094141.3124990-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add READ_ONCE() on lockless reads of net->ipv6.sysctl.ip6_rt_gc_interval
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260115094141.3124990-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add missing READ_ONCE() when reading ipv6.sysctl.flowlabel_reflect,
as its value can be changed under us.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260115094141.3124990-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a missing READ_ONCE(), and add const qualifiers to the two parameters.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260115094141.3124990-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use READ_ONCE() to read sysctl values in ip6_make_flowlabel()
and ip6_make_flowlabel()
Add a const qualifier to 'struct net' parameters.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260115094141.3124990-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Group together following struct netns_sysctl_ipv6 fields:
- flowlabel_consistency
- auto_flowlabels
- flowlabel_state_ranges
After this patch, ip6_make_flowlabel() uses a single cache line to fetch
auto_flowlabels and flowlabel_state_ranges (instead of two before the patch).
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260115094141.3124990-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The commit 7e89efc6e9 ("Lock upstream bridge for pci_reset_function()")
added locking of the upstream bridge to the reset function. To catch
paths that are not properly locked, the commit 920f646892 ("Warn on
missing cfg_access_lock during secondary bus reset") added a warning
if the PCI configuration space was not locked during a secondary bus reset
request.
When a VFIO PCI device is released from userspace ownership, an attempt
to reset the PCI device function may be made. If so, and the upstream bridge
is not locked, the release request results in a warning:
pcieport 0000:00:00.0: unlocked secondary bus reset via:
pci_reset_bus_function+0x188/0x1b8
Add missing upstream bridge locking to vfio_pci_core_disable().
Fixes: 7e89efc6e9 ("PCI: Lock upstream bridge for pci_reset_function()")
Signed-off-by: Anthony Pighin <anthony.pighin@nokia.com>
Link: https://lore.kernel.org/r/BN0PR08MB695171D3AB759C65B6438B5D838DA@BN0PR08MB6951.namprd08.prod.outlook.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
The sizeof_wfhw field wasn't populated in max7360_pwm_ops so it was set
to 0 by default.
While this is ok for now because:
sizeof(struct max7360_pwm_waveform) < PWM_WFHWSIZE
in the future, if struct max7360_pwm_waveform grows, it could lead to
stack corruption.
Fixes: d93a75d94b ("pwm: max7360: Add MAX7360 PWM support")
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Link: https://patch.msgid.link/20260113163907.368919-1-richard.genoud@bootlin.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
