Make aptina_pll_calculate() debug log the calculated p1 min and max values,
this makes it easier to see how the m, n and p1 values were chosen.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The reset GPIO must be requested in the asserted (HIGH) state to keep
the sensor in standby during probe and power sequencing.
Signed-off-by: Elgin Perumbilly <elgin.perumbilly@siliconsignals.io>
Acked-by: Tarang Raval <tarang.raval@siliconsignals.io>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Provide information on the frame layout using frame descriptors.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
With enable_streams and disable_streams, the driver for a device where
streams are not independently started and stopped needs to maintain state
information on streams that have been requested to be started. Do that
now.
In the future, a helper function in the framework is a desirable way to do
this instead.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Switch from s_stream() video op to enable_streams() and disable_streams()
pad operations. They are preferred and required for streams support.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Fix setting sub-device state for non-source sub-devices.
Fixes: 5755be5f15 ("media: v4l2-subdev: Rename .init_cfg() operation to .init_state()")
Cc: stable@vger.kernel.org # for v6.8 and later
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Configurable vertical blanking size control allows users to set a wanted
image frame rate.
Reviewed-by: Tarang Raval <tarang.raval@siliconsignals.io>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Configurable vertical blanking size control allows users to set a wanted
image frame rate.
Reviewed-by: Tarang Raval <tarang.raval@siliconsignals.io>
Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Convert binding for ti,omap3isp from TXT to YAML format.
Signed-off-by: Alex Tran <alex.t.tran@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Convert binding for toshiba,et8ek8 from TXT to YAML format.
Update MAINTAINERS file accordingly. The binding references
video-interface-devices.yaml at top level to inherit flash-leds
property.
Signed-off-by: Alex Tran <alex.t.tran@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Fix checkpatch error "trailing statements should be on next line"
by moving the return statement to a new line.
Signed-off-by: Arjun Changla <arjunchangla7@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The memory allocation functions (kvzalloc) already emit a stack dump
on failure when GFP_KERNEL is used. Printing an extra error message
is redundant and increases code size.
This resolves the checkpatch warnings:
WARNING: Possible unnecessary 'out of memory' message
Signed-off-by: Zixuan Dong <dbeidachazi@foxmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The link frequency can vary between modes, so add it as a control.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The pixel rate control is marked as read-only by the framework itself,
so no need to mark it explicitly in the driver. Also, we can set the ops
to NULL to avoid checking for it in the s_ctrl implementation.
Suggested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
In order to simplify the driver slightly, use the same PLL
configuration, and hence pixel rate and link frequency (to be
added) for the full, 1080p, and binned modes.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
There are many registers in common between all the modes.
Pull those out into one common table.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
To make comparisons of the mode registers easier, put the registers
for the binned and VGA modes in the same order as the others.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The driver did expose V4L2_CID_HBLANK, but as a READ_ONLY control.
The sensor only uses the HTS register to control the line length,
so convert this control to read/write, with the appropriate ranges.
Adopt the old fixed values as the minimum values permitted in each
mode to avoid issues of it not streaming.
This should allow exposure times up to ~3 seconds (up from ~1sec).
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
v4l2_async_register_subdev doesn't bind in lens or flash drivers,
but v4l2_async_register_subdev_sensor does.
Switch to using v4l2_async_register_subdev_sensor.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add missing controls for horizontal and vertical flipping.
The sensor readout mirrors in the horizontal direction by default (if
0x3821[1] = 0) which can make things unnecessarily difficult for
applications. The register table prior to this commit was setting that
bit explicitly, to achieve a normally oriented image.
Now that we have userspace controls for HFLIP, we keep the convention
and report the non-mirrored image (with 0x3821[1] = 1) as
horizontal_flip=0, and vice versa.
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Co-developed-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Parse device properties and register controls for them using the V4L2
fwnode properties helpers.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Allow properties from video-interface-devices. The change is identical to
commit 08fbd355be ("media: dt-bindings: sony,imx219: Allow props from
video-interface-devices")
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The driver supported using GPIOs to control the shutdown line,
but no regulator control.
Add regulator hooks.
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The OV5647 camera sensor takes 3 voltage supplies. So define those in
the bindings as optional regulators, to not break existing users.
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The pixel rate for VGA (640x480) mode is configured in the mode's table
to be 58.333 MPix/s instead of 55 MPix/s, so fix it.
Fixes: 911f4516ee ("media: ov5647: Support V4L2_CID_PIXEL_RATE")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/CAPY8ntA2TCf9FuB6Nk%2BOn%2By6N_PMuYPAOAr3Yx8YESwe4skWvw@mail.gmail.com/
Suggested-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
As this sensor captures RAW bayer frames, the colorspace should be
V4L2_COLORSPACE_RAW instead of SRGB.
Fixes: a8df5af695 ("media: ov5647: Add SGGBR10_1X10 modes")
Cc: stable@vger.kernel.org
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Trial and error reveals that the minimum vblank value appears to be 24
(the OV5647 data sheet does not give any clues). This fixes streaming
lock-ups in full resolution mode.
Fixes: 2512c06441 ("media: ov5647: Support V4L2_CID_VBLANK control")
Cc: stable@vger.kernel.org
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The top offset in the pixel array is actually 6 (see page 3-1 of the
OV5647 data sheet).
Fixes: 14f70a3232 ("media: ov5647: Add support for get_selection()")
Cc: stable@vger.kernel.org
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
In ov5647_init_controls() we call v4l2_get_subdevdata, but it is
initialized by v4l2_i2c_subdev_init() in the probe, which currently
happens after init_controls(). This can result in a segfault if the
error condition is hit, and we try to access i2c_client, so fix the
order.
Fixes: 4974c2f19f ("media: ov5647: Support gain, exposure and AWB controls")
Cc: stable@vger.kernel.org
Suggested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
ccs_validate_csi_data_format() will soon be needed elsewhere, above its
current location. Move it up.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Julien Massot <julien.massot@collabora.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
In preparation for upcoming changes in the function, rename the out label
as err_pm_put. The purpose of the label is changed to match its name in
the next patch.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Prepare for using ccs_pm_get_init from locations earlier than its the
current place.
Also add a missing newline while at it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Streaming will have been stopped before the sensor is powered off, and so
sensor->streaming is also false already. Do not set it as part of the
runtime suspend callback.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Document that -ENXIO is returned when the user tries to set a routing
configuration not supported by the hardware (or rather the driver). The
documentation details the exact cases of this, besides -EINVAL that is
already documented for VIDIOC_SUBDEV_S_ROUTING.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The routing flag indicating an active route is called
V4L2_SUBDEV_ROUTE_FL_ACTIVE, not V4L2_SUBDEV_STREAM_FL_ACTIVE. Fix this.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Remove DocBook (?) conversion leftovers from figure titles, including
obsolete numbering and highlighting. This aligns these titles with others.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Once an async connection is found to be matching with an fwnode, a
sub-device may be registered (in case it wasn't already), its bound
operation is called, ancillary links are created, the async connection
is added to the sub-device's list of connections and removed from the
global waiting connection list. Further on, the sub-device's possible own
notifier is searched for possible additional matches.
Fix these specific issues:
- If v4l2_async_match_notify() failed before the sub-notifier handling,
the async connection was unbound and its entry removed from the
sub-device's async connection list. The latter part was also done in
v4l2_async_match_notify().
- The async connection's sd field was only set after creating ancillary
links in v4l2_async_match_notify(). It was however dereferenced in
v4l2_async_unbind_subdev_one(), which was called on error path of
v4l2_async_match_notify() failure.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: "Yew, Chang Ching" <chang.ching.yew@intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Calculating maximum M for scaler configuration involves dividing by
MIN_X_OUTPUT_SIZE limit register's value. Albeit the value is presumably
non-zero, the driver was missing the check it in fact was. Fix this.
Reported-by: Josh Poimboeuf <jpoimboe@kernel.org>
Closes: https://lore.kernel.org/all/ahukd6b3wonye3zgtptvwzvrxldcruazs2exfvll6etjhmcxyj@vq3eh6pd375b/
Fixes: ccfc97bdb5 ("[media] smiapp: Add driver")
Cc: stable@vger.kernel.org # for 5.15 and later
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org> # build
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
v4l2_fwnode_endpoint_parse() and v4l2_fwnode_endpoint_alloc_parse() take
a fwnode as the first argument and leave it up to the caller to check a
valid fwnode has been obtained through various means. Instead, add a check
here so the callers won't need to do that anymore.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Michael Riesch <michael.riesch@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The vast majority of the callers of v4l2_ctrl_new_fwnode_properties() do
check the returned error code but the function does not set the control
handler's error on failure. This will make error handling more complicated
and prone for bugs.
Always assign the control handler's error field on error in
v4l2_ctrl_new_fwnode_properties().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Allison Henderson says:
====================
net/rds: RDS-TCP bug fix collection, subset 1: Work queue scalability
This is subset 1 of the RDS-TCP bug fix collection series I posted last
Oct. The greater series aims to correct multiple rds-tcp bugs that
can cause dropped or out of sequence messages. The set was starting to
get a bit large, so I've broken it down into smaller sets to make
reviews more manageable.
In this subset, we focus on work queue scalability. Messages queues
are refactored to operate in parallel across multiple connections,
which improves response times and avoids timeouts.
The entire set can be viewed in the rfc here:
https://lore.kernel.org/netdev/20251022191715.157755-1-achender@kernel.org/
Questions, comments, flames appreciated!
====================
Link: https://patch.msgid.link/20260109224843.128076-1-achender@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
RDS was written to require ordered workqueues for "cp->cp_wq":
Work is executed in the order scheduled, one item at a time.
If these workqueues are shared across connections,
then work executed on behalf of one connection blocks work
scheduled for a different and unrelated connection.
Luckily we don't need to share these workqueues.
While it obviously makes sense to limit the number of
workers (processes) that ought to be allocated on a system,
a workqueue that doesn't have a rescue worker attached,
has a tiny footprint compared to the connection as a whole:
A workqueue costs ~900 bytes, including the workqueue_struct,
pool_workqueue, workqueue_attrs, wq_node_nr_active and the
node_nr_active flex array. Each connection can have up to 8
(RDS_MPATH_WORKERS) paths for a worst case of ~7 KBytes per
connection. While an RDS/IB connection totals only ~5 MBytes.
So we're getting a signficant performance gain
(90% of connections fail over under 3 seconds vs. 40%)
for a less than 0.02% overhead.
RDS doesn't even benefit from the additional rescue workers:
of all the reasons that RDS blocks workers, allocation under
memory pressue is the least of our concerns. And even if RDS
was stalling due to the memory-reclaim process, the work
executed by the rescue workers are highly unlikely to free up
any memory. If anything, they might try to allocate even more.
By giving each connection path its own workqueues, we allow
RDS to better utilize the unbound workers that the system
has available.
Signed-off-by: Somasundaram Krishnasamy <somasundaram.krishnasamy@oracle.com>
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260109224843.128076-3-achender@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch adds a per connection workqueue which can be initialized
and used independently of the globally shared rds_wq.
This patch is the first in a series that aims to address tcp ack
timeouts during the tcp socket shutdown sequence.
This initial refactoring lays the ground work needed to alleviate
queue congestion during heavy reads and writes. The independently
managed queues will allow shutdowns and reconnects respond more quickly
before the peer(s) timeout waiting for the proper acks.
Signed-off-by: Allison Henderson <allison.henderson@oracle.com>
Link: https://patch.msgid.link/20260109224843.128076-2-achender@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The callbacks .probe(), .remove() and .shutdown() for device_drivers
should go away. So migrate to bus methods. There are two differences
that need addressing:
- The bus remove callback returns void while the driver remove callback
returns int (the actual value is ignored by the core).
- The bus shutdown callback is also called for unbound devices, so an
additional check for dev->driver != NULL is needed.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # tegra20 tegra-video
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/dd55d034c68953268ea416aa5c13e41b158fcbb4.1765355236.git.u.kleine-koenig@baylibre.com
ida_alloc_max() interprets its max argument as inclusive.
Using SDW_FW_MAX_DEVICES(16) therefore allows an ID of 16 to be
allocated, but the IRQ domain created for the bus is sized for IDs
0-15. If 16 is returned, irq_create_mapping() fails and the driver
ends up with an invalid IRQ mapping.
Limit the allocation to 0-15 by passing SDW_FW_MAX_DEVICES - 1.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202512240450.hlDH3nCs-lkp@intel.com/
Fixes: aab12022b0 ("soundwire: bus: Add internal slave ID and use for IRQs")
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260110201959.2523024-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The return value of struct device_driver::remove is ignored by the core
(see device_remove() in drivers/base/dd.c). So it doesn't make sense to
let the host1x remove callback return an int just to ignore it later.
So make the callback return void. All current implementors return 0, so
they are easily converted.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # tegra20 tegra-video
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/d364fd4ec043d36ee12e46eaef98c57658884f63.1765355236.git.u.kleine-koenig@baylibre.com
