Commit graph

199,496 commits

Author SHA1 Message Date
Peter Zijlstra
a026dfecc0 perf_counter: x86: Allow unpriviliged use of NMIs
Apply sysctl_perf_counter_priv to NMIs. Also, fail the counter
creation instead of silently down-grading to regular interrupts.

[ Impact: allow wider perf-counter usage ]

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-15 09:46:57 +02:00
Ingo Molnar
f5a5a2f6e6 perf_counter: x86: Fix throttling
If counters are disabled globally when a perfcounter IRQ/NMI hits,
and if we throttle in that case, we'll promote the '0' value to
the next lapic IRQ and disable all perfcounters at that point,
permanently ...

Fix it.

[ Impact: fix hung perfcounters under load ]

Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-15 09:46:56 +02:00
Peter Zijlstra
ec3232bdf8 perf_counter: x86: More accurate counter update
Take the counter width into account instead of assuming 32 bits.

In particular Nehalem has 44 bit wide counters, and all
arithmetics should happen on a 44-bit signed integer basis.

[ Impact: fix rare event imprecision, warning message on Nehalem ]

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-15 09:46:54 +02:00
Arnaldo Carvalho de Melo
1a853e3687 perf record: Allow specifying a pid to record
Allow specifying a pid instead of always fork+exec'ing a command.

Because the PERF_EVENT_COMM and PERF_EVENT_MMAP events happened before
we connected, we must synthesize them so that 'perf report' can get what
it needs.

[ Impact: add new command line option ]

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <20090515015046.GA13664@ghostprotocols.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-15 09:35:24 +02:00
Benjamin Herrenschmidt
ad892a63f6 powerpc: Fix PCI ROM access
A couple of issues crept in since about 2.6.27 related to accessing PCI
device ROMs on various powerpc machines.

First, historically, we don't allocate the ROM resource in the resource
tree. I'm not entirely certain of why, I susepct they often contained
garbage on x86 but it's hard to tell. This causes the current generic
code to always call pci_assign_resource() when trying to access the said
ROM from sysfs, which will try to re-assign some new address regardless
of what the ROM BAR was already set to at boot time. This can be a
problem on hypervisor platforms like pSeries where we aren't supposed
to move PCI devices around (and in fact probably can't).

Second, our code that generates the PCI tree from the OF device-tree
(instead of doing config space probing) which we mostly use on pseries
at the moment, didn't set the (new) flag IORESOURCE_SIZEALIGN on any
resource. That means that any attempt at re-assigning such a resource
with pci_assign_resource() would fail due to resource_alignment()
returning 0.

This fixes this by doing these two things:

 - The code that calculates resource flags based on the OF device-node
is improved to set IORESOURCE_SIZEALIGN on any valid BAR, and while at
it also set IORESOURCE_READONLY for ROMs since we were lacking that too

 - We now allocate ROM resources as part of the resource tree. However
to limit the chances of nasty conflicts due to busted firmwares, we
only do it on the second pass of our two-passes allocation scheme,
so that all valid and enabled BARs get precedence.

This brings pSeries back the ability to access PCI ROMs via sysfs (and
thus initialize various video cards from X etc...).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-15 16:43:42 +10:00
Benjamin Herrenschmidt
b173f03d7c powerpc/pseries: Really fix the oprofile CPU type on pseries
My previous pach for fixing the oprofile CPU type got somewhat mismerged
(by my fault) when it collided with another related patch. This should
finally (fingers crossed) fix the whole thing.

We make sure we keep the -old- oprofile type and CPU type whenever
one of them was specified in the first pass through the function.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-15 16:43:42 +10:00
Benjamin Krill
951c4df5b7 serial/nwpserial: Fix wrong register read address and add interrupt acknowledge.
The receive interrupt routine checks the wrong register if the
receive fifo is empty. Further an explicit interrupt acknowledge
write is introduced. In some circumstances another interrupt was
issued.

Signed-off-by: Benjamin Krill <ben@codiert.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-15 16:43:42 +10:00
Gerhard Stenzel
37cd8ed90f powerpc/cell: Make ptcal more reliable
There have been a series of checkstops on QS21 related to
ptcal being set up incorrectly. On systems that only
have memory on a single node, ptcal fails when it gets
a pointer to memory on the remote node.

Moreover, agressive prefetching in memcpy and other
functions may accidentally touch the first cache line
of the page that we reserve for ptcal, which causes
an ECC checkstop.

We now allocate pages only from the specified node, moves the
ptcal area into the middle of the allocated page to avoid
potential prefetch problems and prints the address of the
ptcal area to facilitate diagnostics.

Signed-off-by: Gerhard Stenzel <gerhard.stenzel@de.ibm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-15 16:43:42 +10:00
Becky Bruce
49a8496525 powerpc: Allow mem=x cmdline to work with 4G+
We're currently choking on mem=4g (and above) due to memory_limit
being specified as an unsigned long. Make memory_limit
phys_addr_t to fix this.

Signed-off-by: Becky Bruce <beckyb@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-15 16:43:41 +10:00
Kumar Gala
31207dab7d powerpc/mpic: Fix incorrect allocation of interrupt rev-map
Before when we were setting up the irq host map for mpic we passed in
just isu_size for the size of the linear map.  However, for a number of
mpic implementations we have no isu (thus pass in 0) and will end up
with a no linear map (size = 0).  This causes us to always call
irq_find_mapping() from mpic_get_irq().

By moving the allocation of the host map to after we've determined the
number of sources we can actually benefit from having a linear map for
the non-isu users that covers all the interrupt sources.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-15 16:43:41 +10:00
Maynard Johnson
e5fc948b11 powerpc: Fix oprofile sampling of marked events on POWER7
Description
-----------
Change ppc64 oprofile kernel driver to use the SLOT bits (MMCRA[37:39]only on
older processors where those bits are defined.

Background
----------
The performance monitor unit of the 64-bit POWER processor family has the
ability to collect accurate instruction-level samples when profiling on marked
events (i.e., "PM_MRK_<event-name>").  In processors prior to POWER6, the MMCRA
register contained "slot information" that the oprofile kernel driver used to
adjust the value latched in the SIAR at the time of a PMU interrupt.  But as of
POWER6, these slot bits in MMCRA are no longer necessary for oprofile to use,
since the SIAR itself holds the accurate sampled instruction address.  With
POWER6, these MMCRA slot bits were zero'ed out by hardware so oprofile's use of
these slot bits was, in effect, a NOP.  But with POWER7, these bits are no
longer zero'ed out; however, they serve some other purpose rather than slot
information.  Thus, using these bits on POWER7 to adjust the SIAR value results
in samples being attributed to the wrong instructions.  The attached patch
changes the oprofile kernel driver to ignore these slot bits on all newer
processors starting with POWER6.

Signed-off-by: Maynard Johnson <maynardj@us.ibm.com>
Signed-off-by: Michael Wolf <mjw@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-15 16:43:41 +10:00
Stephen Rothwell x
397717c578 powerpc/iseries: Fix pci breakage due to bad dma_data initialization
Commit 4fc665b88a "powerpc: Merge 32 and
64-bit dma code" made changes to the PCI initialisation code that added
an assignment to archdata.dma_data but only for 32 bit code.  Commit
7eef440a54 "powerpc/pci: Cosmetic cleanups
of pci-common.c" removed the conditional compilation.  Unfortunately,
the iSeries code setup the archdata.dma_data before that assignment was
done - effectively overwriting the dma_data with NULL.

Fix this up by moving the iSeries setup of dma_data into a
pci_dma_dev_setup callback.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-15 16:43:41 +10:00
Timur Tabi
93f1cc609c powerpc: Fix mktree build error on Mac OS X host
The mktree utility defines some variables as "uint", although this is not a
standard C type, and so cross-compiling on Mac OS X fails.  Change this to
"unsigned int".

Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-15 16:43:41 +10:00
Borislav Petkov
103f7033bd ide: unify interrupt reason checking
Add ide_check_ireason() function that handles all ATAPI devices.
Reorganize all unlikely cases in ireason checking further down in the
code path.

In addition, add PFX for printks originating from ide-atapi. Finally,
remove ide_cd_check_ireason.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:45 +02:00
Borislav Petkov
239f7e2534 ide-cd: use whole request_sense buffer in EH
Now that we use a static request_sense buffer, use it instead of the
first 18 bytes only. Also, remove sense-arg to cdrom_analyze_sense_data
and cdrom_log_sense since we can access it through drive->sense_data
now.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:41 +02:00
Borislav Petkov
19f52a784f ide-atapi: remove pc->buf
Now after all users of pc->buf have been converted, remove the 64B buffer
embedded in each packet command.

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:38 +02:00
Borislav Petkov
55ce3a129e ide-tape: fix READ POSITION cmd handling
ide-tape used to issue READ POSITION in several places and the
evaluation of the returned READ POSITION data was done in the
->pc_callback. Convert it to use local buffer and move that
evaluation chunk in the idetape_read_position(). Additionally, fold
idetape_create_read_position_cmd() into it, too, thus concentrating READ
POSITION handling in one method only and making all places call that.

Finally, mv {idetape,ide_tape}_read_position.

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:35 +02:00
Borislav Petkov
837272b4f9 ide-tape/ide_tape_get_bsize_from_bdesc: use local buffer
There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:31 +02:00
Borislav Petkov
60cfab85da ide-floppy/ide_floppy_get_format_progress: use local sense buffer
There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:28 +02:00
Borislav Petkov
ae3a8387be ide-atapi: use local sense buffer
Access the sense buffer through the bio in ->pc_callback method thus
alleviating the need for the pc->buf pointer.

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:23 +02:00
Borislav Petkov
5122e5174f ide-floppy/ide_floppy_format_unit: use local buffer
Pass the buffer into ide_floppy_create_format_unit_cmd instead of using
pc->buf.

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:20 +02:00
Borislav Petkov
802e663427 ide-floppy/ide_floppy_get_sfrp_bit: use local buffer
There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:17 +02:00
Borislav Petkov
d9a6830764 ide-floppy/ide_floppy_get_flexible_disk_page: use local buffer
There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:13 +02:00
Borislav Petkov
b13345f39d ide-atapi: add a buffer-arg to ide_queue_pc_tail
This is in preparation of removing ide_atapi_pc. Expose the buffer as an
argument to ide_queue_pc_tail with later replacing it with local buffer
or even kmalloc'ed one if needed due to stack usage constraints.

Also, add the possibility of passing a NULL-ptr buffer for cmds which
don't transfer data besides the cdb. While at it, switch to local buffer
in idetape_get_mode_sense_results().

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:09 +02:00
Borislav Petkov
5a0e43b5e2 ide-atapi: add a len-parameter to ide_queue_pc_tail
This is in preparation for removing ide_atapi_pc.

There should be no functional change resulting from this patch.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:06 +02:00
Borislav Petkov
077e6dba20 ide-atapi: switch to rq->resid_len
Now that we have rq->resid_len, use it to account partial completion
amount during the lifetime of an rq, decrementing it on each successful
transfer. As a result, get rid of now unused pc->xferred.

While at it, remove noisy debug call in ide_prep_sense.

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:44:02 +02:00
Borislav Petkov
dfb7e621fa ide-atapi: switch to blk_rq_bytes() on do_request() path
After the recent struct request cleanups, blk_rq_bytes() is guaranteed
to be valid and is the current total length of the rq's bio. Use that
instead of pc->req_xfer in the do_request() path after the command has
been queued

The remaining usage of pc->req_xfer now is only until we map the rq to a
bio.

While at it:

- remove local caching of rq completion length in ide_tape_issue_pc()

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:43:59 +02:00
Borislav Petkov
10c0b3437c ide-tape: fix potential fs requests bug
ide-tape had a potential bug for fs requests when preparing the command
packet: it was writing the transfer length as a number of fixed blocks.
However, the block layer implies 512 byte blocks and ide-tape can have
other block sizes so account for that too.

ide-floppy does this calculation properly with the block size factor
(floppy->bs_factor).

Signed-off-by: Borislav Petkov <petkovbb@gmail.com>
2009-05-15 06:43:45 +02:00
Li Zefan
5872144f64 tracing/filters: fix off-by-one bug
We should leave the last slot for the ending '\0'.

[ Impact: fix possible crash when the length of an operand is 128 ]

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A0CDC8C.30602@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-14 23:55:12 -04:00
Li Zefan
8cd995b6de tracing/filters: add missing unlock in a failure path
[ Impact: fix deadlock in a rare case we fail to allocate memory ]

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4A0CDC6F.7070200@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-14 23:55:10 -04:00
Steven Rostedt
1ec7c4849c tracing: stop stack trace on first empty entry
The stack tracer stores eight entries in the ring buffer when an event
traces the stack. The output outputs all eight entries regardless of
how many entries were recorded.

This patch breaks out of the loop when a null entry is discovered.

[ Impact: only print the stack that is recorded ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-14 23:40:06 -04:00
Steven Rostedt
29a679754b x86/stacktrace: return 0 instead of -1 for stack ops
If we return -1 in the ops->stack for the stacktrace saving, we end up
breaking out of the loop if the stack we are tracing is in the exception
stack. This causes traces like:

          <idle>-0     [002] 34263.745825: raise_softirq_irqoff <-__blk_complete_request
          <idle>-0     [002] 34263.745826:
 <= 0
 <= 0
 <= 0
 <= 0
 <= 0
 <= 0
 <= 0

By returning "0" instead, the irq stack is saved as well, and we see:

          <idle>-0     [003]   883.280992: raise_softirq_irqoff <-__hrtimer_star
t_range_ns
          <idle>-0     [003]   883.280992:
 <= hrtimer_start_range_ns
 <= tick_nohz_restart_sched_tick
 <= cpu_idle
 <= start_secondary
 <=
 <= 0
 <= 0

[ Impact: record stacks from interrupts ]

Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2009-05-14 23:19:09 -04:00
Magnus Damm
639138a991 sound: oss: sh_dac_audio timer fixes.
This patch modifies sh_dac_audio in the following ways:

- use high resolution timer instead of TMU1
- fix cpu/dac.h include
- add future rewrite comment

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-15 12:07:17 +09:00
Paul Mundt
bec36eca6f sh: hd64461: Fix up I/O base register offsets.
hd64461 is mapped in a fixed location, so the I/O base itself is fairly
meaningless as a configuration item. Additionally, this makes it
impossible to share hd64461 code alongside generic drivers (in the case
of sh_dac_audio), so simply make it commonly defined and permit the
mach_is_foo() logic to work out the proper semantics.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-15 12:03:04 +09:00
Linus Torvalds
bd67ce0f66 Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  cifs: fix error handling in parse_DFS_referrals
2009-05-14 19:20:04 -07:00
Linus Torvalds
c48f2295a9 Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (38 commits)
  MIPS: Sibyte: Fix locking in set_irq_affinity
  MIPS: Use force_sig when handling address errors.
  MIPS: Cavium: Add struct clocksource * argument to octeon_cvmcount_read()
  MIPS: Rewrite <asm/div64.h> to work with gcc 4.4.0.
  MIPS: Fix highmem.
  MIPS: Fix sign-extension bug in 32-bit kernel on 32-bit hardware.
  MIPS: MSP71xx: Remove the RAMROOT functions
  MIPS: Use -mno-check-zero-division
  MIPS: Set compiler options only after the compiler prefix has ben set.
  MIPS: IP27: Get rid of #ident.  Gcc 4.4.0 doesn't like it.
  MIPS: uaccess: Switch lock annotations to might_fault().
  MIPS: MSP71xx: Resolve use of non-existent GPIO routines in msp71xx reset
  MIPS: MSP71xx: Resolve multiple definition of plat_timer_setup
  MIPS: Make uaccess.h slightly more sparse friendly.
  MIPS: Make access_ok() sideeffect proof.
  MIPS: IP27: Fix clash with NMI_OFFSET from hardirq.h
  MIPS: Alchemy: Timer build fix
  MIPS: Kconfig: Delete duplicate definition of RWSEM_GENERIC_SPINLOCK.
  MIPS: Cavium: Add support for 8k and 32k page sizes.
  MIPS: TXx9: Fix possible overflow in clock calculations
  ...
2009-05-14 19:19:43 -07:00
Linus Torvalds
5732c46849 Merge git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable
* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: Spelling fix in btrfs_lookup_first_block_group comments
  Btrfs: make show_options result match actual option names
  Btrfs: remove outdated comment in btrfs_ioctl_resize()
  Btrfs: remove some WARN_ONs in the IO failure path
  Btrfs: Don't loop forever on metadata IO failures
  Btrfs: init inode ordered_data_close flag properly
2009-05-14 19:18:44 -07:00
Inaky Perez-Gonzalez
4e5b6d006b wimax/i2400m: fix device crash: fix optimization in _roq_queue_update_ws
When the i2400m receives data and the device indicates there has to be
reordering, we keep an sliding window implementation to sort the
packets before sending them to the network stack.

One of the "operations" that the device indicates is "queue a packet
and update the window start". When the queue is empty, this is
equivalent to "deliver the packet and update the window start".

That case was optimized in i2400m_roq_queue_update_ws() so that we
would not pointlessly queue and dequeue a packet. However, when the
optimization was active, it wasn't updating the window start. That
caused the reorder management code to get confused later on with what
seemed to be wrong reorder requests from the device.

Thus the fix implemented is to do the right thing and update the
window start in both cases, when the queue is empty (and the
optimization is done) and when not.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-05-14 18:00:32 -07:00
Eric Paris
c3d20103d0 IMA: do not measure everything opened by root by default
The IMA default policy measures every single file opened by root.  This is
terrible for most users.  Consider a system (like mine) with virtual machine
images.  When those images are touched (which happens at boot for me) those
images are measured.  This is just way too much for the default case.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-05-15 09:55:44 +10:00
Eric Paris
f850a7c040 IMA: remove read permissions on the ima policy file
The IMA policy file does not implement read.  Trying to just open/read/close
the file will load a blank policy and you cannot then change the policy
without a reboot.  This removes the read permission from the file so one must
at least be attempting to write...

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-05-15 09:55:41 +10:00
Carl Worth
08d7b3d1ed drm/i915: Add new GET_PIPE_FROM_CRTC_ID ioctl.
This allows userlevel code to discover the pipe number corresponding
to a given CRTC ID. This is necessary for doing pipe-specific
operations such as waiting for vblank on a given CRTC.  Failure to use
the right pipe mapping can result in GPU hangs, or at least failure
to actually sync to vblank.

Signed-off-by: Carl Worth <cworth@cworth.org>
[anholt: Style touchups from review]
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-05-14 16:00:32 -07:00
Ma Ling
9d2949a4cd drm/i915: Set HDMI hot plug interrupt enable for only the output in question.
We detect HDMI output connection status by writing to HOT Plug Interrupt
Detect Enable bit in PORT_HOTPLUG_EN.  The behavior will generate a specified
interrupt, which is caught by audio driver, but during one detection driver
set all Detect Enable bits of HDMIB, HDMIC HDMID, and generate wrong
interrupt signals for current output, according to the signals audio driver
misunderstand device status. The patch intends to handle corresponding
output precisely.

It fixed freedesktop.org bug #21371

Signed-off-by: Ma Ling <ling.ma@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-05-14 16:00:31 -07:00
Ma Ling
c9ed4486bd drm/i915: Include 965GME pci ID in IS_I965GM(dev) to match UMS.
It fixed bug #21659

Signed-off-by: Ma Ling <ling.ma@intel.com>
[anholt: hand-applied because git-am is too picky]
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-05-14 16:00:30 -07:00
Ma Ling
e92597cfff drm/i915: Use the GM45 VGA hotplug workaround on G45 as well.
Although spec say CRT_HOTPLUG_ACTIVATION_PERIOD_64 is only useful for
mobile platform, it is also required to detect vga on G4x desktops correctly.
Tested on G45/G43/Q45 platforms with no regressions.

It fixed freedesktop.org bug #21120 and part of bug #21210

Signed-off-by: Ma Ling <ling.ma@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-05-14 16:00:29 -07:00
Jarod Wilson
425d244c86 drm/i915: ignore LVDS on intel graphics systems that lie about having it
There are a number of small form factor desktop systems with Intel mobile
graphics chips that lie and say they have an LVDS. With kernel mode-setting,
this becomes a problem, and makes native resolution boot go haywire -- for
example, my Dell Studio Hybrid, hooked to a 1920x1080 display claims to
have a 1024x768 LVDS, and the resulting graphical boot on the 1920x1080
display uses only the top left 1024x768, and auto-configured X will end
up only 1024x768 as well. With this change, graphical boot and X
both do 1920x1080 as expected.

Note that we're simply embracing and extending the early bail-out code
in place for the Mac Mini here. The xorg intel driver uses pci subsystem
device and vendor id for matching, while we're using dmi lookups here.
The MSI addition is courtesy of and tested by Bill Nottingham.

Signed-off-by: Jarod Wilson <jarod@redhat.com>
Tested-by: Bill Nottingham <notting@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-05-14 16:00:28 -07:00
Jesse Barnes
802c7eb646 drm/i915: sanity check IER at wait_request time
We might sleep here anyway so I hope an extra uncached read is ok to
add.

In #20896 we found that vbetool clobbers the IER.  In KMS mode this is
particularly bad since we don't set the interrupt regs late (in
EnterVT), so we'd fail to get *any* interrupts at all after X started
(since some distros have scripts that call vbetool at X startup
apparently).

So this patch checks IER at wait_request time, and re-enables
interrupts if it's been clobbered.  In a proper config this check
should never be triggered.

This is really a distro issue, but having a sanity check is nice, as
long as it doesn't have a real performance hit.

Tested-by: Mateusz Kaduk <mateusz.kaduk@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[anholt: Moved the check inside of the sleeping case to avoid perf cost]
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-05-14 16:00:27 -07:00
Shaohua Li
0ba0e9e1f1 drm/i915: workaround IGD i2c bus issue in kernel side (v2)
In IGD, DPCUNIT_CLOCK_GATE_DISABLE bit should be set, otherwise i2c
access will be wrong.

v2: Disable CLOCK_GATE_DISABLE bit after bit bashing as suggested by Eric.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-05-14 16:00:26 -07:00
Eric Anholt
13f4c435eb drm/i915: Don't allow binding objects into the last page of the aperture.
This should avoid a class of bugs where the hardware prefetches past the
end of the object, and walks into unallocated memory when the object is
bound to the last page of the aperture.

fd.o bug #21488

Signed-off-by: Eric Anholt <eric@anholt.net>
2009-05-14 16:00:20 -07:00
Edward Goggin
c53a284f8b [SCSI] initialize max_target_blocked in scsi_alloc_target
This patch initializes the max_target_blocked field of a scsi target
structure so that a queuecommand return value of
SCSI_MLQUEUE_TARGET_BUSY will actually result in having the
scsi_queue_insert blocking the device queue before requeuing the
command and running the queue.  Otherwise, can and does cause livelock
on single CPU configurations if/when open-iSCSI software initiator's
command PDU window fills.

Signed-off-by: Ed Goggin <egoggin@vmware.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-05-14 17:17:46 -04:00
Aneesh Kumar K.V
2a8964d63d ext4: Clear the unwritten buffer_head flag after the extent is initialized
The BH_Unwritten flag indicates that the buffer is allocated on disk
but has not been written; that is, the disk was part of a persistent
preallocation area.  That flag should only be set when a get_blocks()
function is looking up a inode's logical to physical block mapping.

When ext4_get_blocks_wrap() is called with create=1, the uninitialized
extent is converted into an initialized one, so the BH_Unwritten flag
is no longer appropriate.  Hence, we need to make sure the
BH_Unwritten is not left set, since the combination of BH_Mapped and
BH_Unwritten is not allowed; among other things, it will result ext4's
get_block() to be called over and over again during the write_begin
phase of write(2).

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-05-14 17:05:39 -04:00