Commit graph

199,496 commits

Author SHA1 Message Date
Mark Brown
33f503c96c ASoC: Use a shared define for AC97 CODEC data formats
The AC97 wire format is completely fixed so CODECs don't have any choice
about the formats they accept but controllers accept a variety of data
formats and render them down onto the bus.  Have a shared define so all
the CODEC drivers will interoperate with any of our controller drivers.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-02 12:32:09 +01:00
Magnus Damm
c81fc2c331 clockevent: export register_device and delta2ns
Export the following symbols using EXPORT_SYMBOL_GPL:
 - clockevent_delta2ns
 - clockevents_register_device

This allows us to build SuperH clockevent and clocksource
drivers as modules, see drivers/clocksource/sh_*.c

[ Impact: allow modular build of clockevent drivers ]

Signed-off-by: Magnus Damm <damm@igel.co.jp>
LKML-Reference: <20090501055247.8286.64067.sendpatchset@rx1.opensource.se>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-02 11:51:07 +02:00
john stultz
7d27558c41 timekeeping: create arch_gettimeoffset infrastructure
Some arches don't supply their own clocksource. This is mainly the
case in architectures that get their inter-tick times by reading the
counter on their interval timer.  Since these timers wrap every tick,
they're not really useful as clocksources.  Wrapping them to act like
one is possible but not very efficient. So we provide a callout these
arches can implement for use with the jiffies clocksource to provide
finer then tick granular time.

[ Impact: ease the migration to generic time keeping ]

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-02 11:45:15 +02:00
Magnus Damm
a25cbd045a clocksource: setup mult_orig in clocksource_enable()
Setup clocksource mult_orig in clocksource_enable().

Clocksource drivers can save power by using keeping the
device clock disabled while the clocksource is unused.

In practice this means that the enable() and disable()
callbacks perform clk_enable() and clk_disable().

The enable() callback may also use clk_get_rate() to get
the clock rate from the clock framework. This information
can then be used to calculate the shift and mult variables.

Currently the mult_orig variable is setup from mult at
registration time only. This is conflicting with the above
case since the clock is disabled and the mult variable is
not yet calculated at the time of registration.

Moving the mult_orig setup code to clocksource_enable()
allows us to both handle the common case with no enable()
callback and the mult-changed-after-enable() case.

[ Impact: allow dynamic clock source usage ]

Signed-off-by: Magnus Damm <damm@igel.co.jp>
LKML-Reference: <20090501054546.8193.10688.sendpatchset@rx1.opensource.se>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-02 11:45:15 +02:00
Jon Hunter
a041988876 timers: allow deferrable timers for intervals tv2-tv5 to be deferred
In the current kernel implementation only kernel timers for time interval
tv1 are being deferred. This patch allows any timer that is configured as
deferrable to be defer regardless of time interval.

This patch was previously discussed in
http://marc.info/?l=linux-kernel&m=123196343531966&w=2 and was acked by
Venki Pallipadi, the author of the original deferrable timer patch.

Signed-off-by: Jon Hunter <jon-hunter@ti.com>
Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-02 10:36:06 +02:00
Dmitri Vorobiev
a52f5c5620 clockevents: tick_broadcast_device can become static
The variable tick_broadcast_device is not used outside of the
file where it is defined, so let's make it static.

Signed-off-by: Dmitri Vorobiev <dmitri.vorobiev@movial.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-02 10:31:14 +02:00
john stultz
74a03b69d1 clockevents: prevent endless loop in tick_handle_periodic()
tick_handle_periodic() can lock up hard when a one shot clock event
device is used in combination with jiffies clocksource.

Avoid an endless loop issue by requiring that a highres valid
clocksource be installed before we call tick_periodic() in a loop when
using ONESHOT mode. The result is we will only increment jiffies once
per interrupt until a continuous hardware clocksource is available.

Without this, we can run into a endless loop, where each cycle through
the loop, jiffies is updated which increments time by tick_period or
more (due to clock steering), which can cause the event programming to
think the next event was before the newly incremented time and fail
causing tick_periodic() to be called again and the whole process loops
forever.

[ Impact: prevent hard lock up ]

Signed-off-by: John Stultz <johnstul@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@kernel.org
2009-05-02 10:22:27 +02:00
Steve French
24d35add2b [CIFS] Remove sparse warning
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-05-02 05:40:39 +00:00
Steve French
989c7e512f [CIFS] remove checkpatch warning
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-05-02 05:32:20 +00:00
Steve French
afe48c31ea [CIFS] Fix final user of old string conversion code
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-05-02 05:25:46 +00:00
Jeff Layton
3410602732 [CIFS] remove cifs_strfromUCS_le
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-05-02 04:59:34 +00:00
Steve French
2edd6c5b05 [CIFS] NTLMSSP support moving into new file, old dead code removed
Remove dead NTLMSSP support from connect.c prior to addition of
the new code to replace it.

Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-05-02 04:55:39 +00:00
Alex Williamson
1824a98974 virtio_net: Fix function name typo
Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01 21:26:36 -07:00
Alex Williamson
23e258e1a8 virtio_net: Cleanup command queue scatterlist usage
We were avoiding calling sg_init* on scatterlists passed
into virtnet_send_command to prevent extraneous end markers.
This caused build warnings for uninitialized variables.
Cleanup the code to create proper scatterlists.

Signed-off-by: Alex Williamson <alex.williamson@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01 21:26:36 -07:00
Eric Sandeen
c9877b205f ext4: fix for fiemap last-block test
Carl Henrik Lunde reported and debugged this; the test for the
last allocated block was comparing bytes to blocks in this test:

	if (logical + length - 1 == EXT_MAX_BLOCK ||
	    ext4_ext_next_allocated_block(path) == EXT_MAX_BLOCK)
		flags |= FIEMAP_EXTENT_LAST;

so any extent which ended right at 4G was stopping the extent
walk.  Just replacing these values with the extent block &
length should fix it.

Also give blksize_bits a saner type, and reverse the order 
of the tests to make the more likely case tested first.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reported-by: Carl Henrik Lunde <chlunde@ping.uio.no>
Tested-by: Carl Henrik Lunde <chlunde@ping.uio.no>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-05-01 23:32:06 -04:00
Aneesh Kumar K.V
19ba0559f9 vfs: Enable FS_IOC_FIEMAP and FIGETBSZ for all filetypes
The fiemap and get_blk_size ioctls should be enabled even for
directories.  So move it outisde file_ioctl.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-05-13 18:12:05 -04:00
Aneesh Kumar K.V
abc8746eb9 ext4: hook fiemap operation for directories
Add fiemap callback for directories

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-05-02 22:54:32 -04:00
Ken Kawasaki
f0a3a1538d 3c589_cs: add cis(firmware) of 3Com multifunction pcmcia card
3c589_cs,3c574_cs,serial_cs:

 (1)add cis(firmware) of 3Com lan&modem mulitifunction pcmcia card.
 (2)load correct configuration register for 3Com card
 
Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01 19:21:26 -07:00
Curt Wohlgemuth
f40339031b ext4: Make the length of the mb_history file tunable
In memory-constrained systems with many partitions, the ~68K for each
partition for the mb_history buffer can be excessive.

This patch adds a new mount option, mb_history_length, as well as a
way of setting the default via a module parameter (or via a sysfs
parameter in /sys/module/ext4/parameter/default_mb_history_length).
If the mb_history_length is set to zero, the mb_history facility is
disabled entirely.

Signed-off-by: Curt Wohlgemuth <curtw@google.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-05-01 20:27:20 -04:00
J. Bruce Fields
3aea09dc91 nfsd4: track recall retries in nfs4_delegation
Move this out of a local variable into the nfs4_delegation object in
preparation for making this an async rpc call (at which point we'll need
any state like this in a common object that's preserved across function
calls).

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-05-01 20:11:12 -04:00
J. Bruce Fields
6707bd3d42 nfsd4: remove unused dl_trunc
There's no point in keeping this field around--it's always zero.

(Background: the protocol allows you to tell the client that the file is
about to be truncated, as an optimization to save the client from
writing back dirty pages that will just be discarded.  We don't
implement this hint.  If we do some day, adding this field back in will
be the least of the work involved.)

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-05-01 19:57:46 -04:00
J. Bruce Fields
b53d40c507 nfsd4: eliminate struct nfs4_cb_recall
The nfs4_cb_recall struct is used only in nfs4_delegation, so its
pointer to the containing delegation is unnecessary--we could just use
container_of().

But there's no real reason to have this a separate struct at all--just
move these fields to nfs4_delegation.

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-05-01 19:50:00 -04:00
Theodore Ts'o
bb23c20a85 ext4: Move fs/ext4/group.h into ext4.h
Move the function prototypes in group.h into ext4.h so they are all
defined in one place.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-05-01 19:44:44 -04:00
Jiri Pirko
1363d9b135 bonding: correct the cleanup in bond_create()
This patch makes the cleanup in bond_create nicer :) Also now the forgotten
free_netdev is called.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01 15:35:28 -07:00
Grant Likely
c047fcd245 virtio: add missing include to virtio_net.h
virtio_net.h uses the macro ETH_ALEN which is defined in linux/if_ether.h.
Discovered when hacking on virtio-over-pci patches.

Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01 15:34:02 -07:00
Ayaz Abdulla
88d7d8b00c forcedeth: add clock gating feature <resend>
This patch adds new logic to support a clock gating feature found on the
latest set of chipsets. The clock gating is performed on the tx/rx
engines when the link is disconnected. Clock gating helps in reducing
power consumption.

* modified based on comments from netdev

Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01 15:30:45 -07:00
Steve Glendinning
726474b8cd smsc95xx: add support for LAN9512 and LAN9514
LAN9512 and LAN9514 are USB hubs with an integrated 10/100 ethernet
controller.  Logically this looks like an ethernet controller (similar
to LAN9500) permanently attached to one of the hub's downstream ports.

This patch adds the usb device id of the new ethernet controller to the
smsc95xx driver.  This id is the same in both new devices.

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01 15:27:03 -07:00
Steve Glendinning
f293501c61 smsc95xx: configure LED outputs
SMSC LAN9500 has dual purpose GPIO/LED pins, and by default at power-on
these are configured as GPIOs.  This means that if LEDs are fitted they
won't ever light.

This patch sets them to be LED outputs for speed, duplex and
link/activity.

Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01 15:27:02 -07:00
Bruno Prémont
2382b15bcc netconsole: take care of NETDEV_UNREGISTER event
When netconsole is loaded and a network interface fades away (e.g. on
rmmod $interface_driver_module) the rmmod remains stuck and some locks
are taken that prevent any additional module loading/unloading as well
as interface up/down changes.
In addition kernel logs (and console) get flooded at 10s interval with

[  122.464065] unregister_netdevice: waiting for eth0 to become free. Usage count = 1
[  132.704059] unregister_netdevice: waiting for eth0 to become free. Usage count = 1

This patch lets netconsole take NETDEV_UNREGISTER event into account
and release the affected interface if it was in use.

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01 15:24:18 -07:00
Laszlo Attila Toth
acda074390 xt_socket: checks for the state of nf_conntrack
xt_socket can use connection tracking, and checks whether it is a module.

Signed-off-by: Laszlo Attila Toth <panther@balabit.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01 15:23:10 -07:00
Greg Kroah-Hartman
1aec5bdfed net: remove driver_data direct access of struct device
In the near future, the driver core is going to not allow direct access
to the driver_data pointer in struct device.  Instead, the functions
dev_get_drvdata() and dev_set_drvdata() should be used.  These functions
have been around since the beginning, so are backwards compatible with
all older kernel versions.

Cc: netdev@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01 15:21:55 -07:00
Eric Dumazet
689c96cca7 bonding: bond_slave_info_query() fix
bond_slave_info_query() should keep a read lock while accessing slave info,
or risk accessing stale data and corruption.

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01 15:18:19 -07:00
Jiri Kosina
e5288eb5ea HID: fix oops in hid_check_keys_pressed()
If the device is not claimed by hid-input (i.e devices driver by userspace
hiddev/hidraw-based drivers, or completely detached from HID
and driver by libusb), we must not check the hid->inptus, as it
is not guaranteed to be initialized, as this is performed only for devices
handled by hid-input.

Reported-by: Guillaume Chazarain <guichaz@gmail.com>
Tested-by: Guillaume Chazarain <guichaz@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-05-02 00:02:57 +02:00
J. Bruce Fields
c237dc0303 nfsd4: rename callback struct to cb_conn
I want to use the name for a struct that actually does represent a
single callback.

(Actually, I've never been sure it helps to a separate struct for the
callback information.  Some day maybe those fields could just be dumped
into struct nfs4_client.  I don't know.)

Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2009-05-01 17:31:44 -04:00
Cyrill Gorcunov
6f0aced639 x86, apic: use pr_ macro
Replace recenly appeared printk with pr_ macro
(the file already use a lot of them).

[ Impact: cleanup ]

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
LKML-Reference: <20090501195425.GB4633@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-01 21:56:25 +02:00
Thomas Gleixner
f9a196b8dc x86: initialize io_bitmap_base on 32bit
commit db949bba3c (x86-32: use non-lazy
io bitmap context switching) broke ioperm for 32bit because it removed
the lazy initialization of io_bitmap_base and did not set it to the
real bitmap offset.

[ Impact: fix non-working sys_ioperm() on 32-bit kernels ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-01 21:09:53 +02:00
Theodore Ts'o
596397b77c ext4: Move fs/ext4/namei.h into ext4.h
The fs/ext4/namei.h header file had only a single function
declaration, and should have never been a standalone file.  Move it
into ext4.h, where should have been from the beginning.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-05-01 13:49:15 -04:00
Theodore Ts'o
ca0faba0e8 ext4: Move the ext4_sb.h header file into ext4.h
There is no longer a reason for a separate ext4_sb.h header file, so
move it into ext4.h just to make life easier for developers to find
the relevant data structures and typedefs.  Should also speed up
compiles slightly, too.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-05-03 16:33:44 -04:00
Theodore Ts'o
d444c3c381 ext4: Move the ext4_i.h header file into ext4.h
There is no longer a reason for a separate ext4_i.h header file, so
move it into ext4.h just to make life easier for developers to find
the relevant data structures and typedefs.  Should also speed up
compiles slightly, too.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2009-05-01 13:44:33 -04:00
Ingo Molnar
4420471f14 Merge branch 'x86/apic' into irq/numa
Conflicts:
	arch/x86/kernel/apic/io_apic.c

Merge reason: non-trivial interaction between ongoing work in io_apic.c
              and the NUMA migration feature in the irq tree.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-01 19:02:50 +02:00
Yinghai Lu
15e957d08d x86/irq: use move_irq_desc() in create_irq_nr()
move_irq_desc() will try to move irq_desc to the home node if
the allocated one is not correct, in create_irq_nr().

( This can happen on devices that are on different nodes that
  are using MSI, when drivers are loaded and unloaded randomly. )

v2: fix non-smp build
v3: add NUMA_IRQ_DESC to eliminate #ifdefs

[ Impact: improve irq descriptor locality on NUMA systems ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <49F95EAE.2050903@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-01 19:01:12 +02:00
Theodore Ts'o
75507efb13 ext4: Don't avoid using BLOCK_UNINIT block groups in mballoc
By avoiding the use of not-yet-used block groups (i.e., block groups
with the BLOCK_UNINIT flag), mballoc had a tendency to create large
files with large non-contiguous gaps.  In addition avoiding the use of
new block groups had a tendency to push regular file data into the
first block group in a flex_bg group, which slows down the speed of
e2fsck pass 2, since it has a tendency to seek much more.  For
example:

               Before Patch                       After Patch
              Time in seconds                   Time in seconds
            Real /  User/  Sys   MB/s      Real /  User/  Sys    MB/s
Pass 1      8.52 / 2.21 / 0.46  20.43      8.84 / 4.97 / 1.11   19.68
Pass 2     21.16 / 1.02 / 1.86  11.30      6.54 / 1.77 / 1.78   36.39
Pass 3      0.01 / 0.00 / 0.00 139.00      0.01 / 0.01 / 0.00  128.90
Pass 4      0.16 / 0.15 / 0.00   0.00      0.17 / 0.17 / 0.00    0.00
Pass 5      2.52 / 1.99 / 0.09   0.79      2.31 / 1.78 / 0.06    0.86
Total      32.40 / 5.11 / 2.49  12.81     17.99 / 8.75 / 2.98   23.01

This was on a sample 80 gig root filesystem which was approximately
50% full.  Note the improved e2fsck pass 2 performance, by over a
factor of 3, due to a decreased number of seeks.  (The total amount of
I/O in pass 2 was unchanged; the layout of the directory blocks was
simply much better from e2fsck's's perspective.)

Other changes as a result of this patch on this sample filesystem:

                             Before Patch    After Patch
# of non-contig files           762             779
# of non-contig directories     571             570
# of BLOCK_UNINIT bg's          307             293
# of INODE_UNINIT bg's          503             503

Out of 640 block groups, of which 333 were in use, this patch caused
an extra 14 block groups to be utilized.  The number of non-contiguous
files did go up slightly, but when measured against the 99.9% of the
files (603,154) which were contiguously allocated, this is pretty
insignificant.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Andreas Dilger <adilger@sun.com>
2009-05-01 12:58:36 -04:00
Thomas Gleixner
4ba67c1d48 perfcounter tools: get the syscall number from arch/*/include/asm/unistd.h
Avoid further confusion during development

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-01 18:50:29 +02:00
Thomas Gleixner
7bd5469cd9 perfcounter tools: fix pointer mismatch
Neither process_options nor execvp take an const **char as argument.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-01 18:42:47 +02:00
Thomas Gleixner
a92e70237c perfcounter tools: make rdclock an inline function
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-01 18:39:47 +02:00
Thomas Gleixner
6eda5838bc perfcounter tools: move common defines ... to local header file
No change, move of duplicated stuff only.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-05-01 18:38:00 +02:00
Steve French
051a2a0d32 [CIFS] Fix endian conversion of vcnum field
When multiply mounting from the same client to the same server, with
different userids, we create a vcnum which should be unique if
possible (this is not the same as the smb uid, which is the handle
to the security context).  We were not endian converting additional
(beyond the first which is zero) vcnum properly.

CC: Stable <stable@kernel.org>
Acked-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-05-01 16:25:15 +00:00
Steve French
e836f015b5 [CIFS] Remove trailing whitespace
Signed-off-by: Steve French <sfrench@us.ibm.com>
2009-05-01 16:20:35 +00:00
Sergey Senozhatsky
00b64f2aa5 cxgb3: fixing gcc 4.4 compiler warning: suggest parentheses around operand of ‘!’
Trivial: fixing gcc 4.4 compiler warning:
drivers/net/cxgb3/t3_hw.c: In function ‘t3_prep_adapter’:
drivers/net/cxgb3/t3_hw.c:3782: warning: suggest parentheses around operand of ‘!’ or change ‘|’ to ‘||’ or ‘!’ to ‘~’

Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@mail.by>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01 09:15:09 -07:00
Eric Dumazet
0f3d042ed2 netfilter: use likely() in xt_info_rdlock_bh()
Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01 09:10:46 -07:00