Commit graph

191,556 commits

Author SHA1 Message Date
Mauro Carvalho Chehab
afe09f821f V4L/DVB (12136): mt9v011: Some fixes at the register initialization table
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-05 14:30:02 -03:00
Mauro Carvalho Chehab
7dfba00d05 V4L/DVB (12135): Add a driver for mt9v011 sensor
Adds driver for mt9v011 based on its datasheet, available at:
	http://download.micron.com/pdf/datasheets/imaging/MT9V011.pdf

The driver was tested with a webcam that will be added on a next patch.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-05 14:30:02 -03:00
Michael Krufky
b179bc4579 V4L/DVB (12166): cx23885: add FIXME comment above set_frontend override
add FIXME comment to indicate that the set_frontend override is a
temporary hack.  This will be done a better way in the next kernel.

Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-05 14:30:01 -03:00
Michael Krufky
f35b9e8039 V4L/DVB (12165): cx23885: override set_frontend to allow rf input path switching on the HVR1275
Use separate RF input spigots for Antennae and Cable.

Reviewed-by: Steven Toth <stoth@kernellabs.com>
Signed-off-by: Michael Krufky <mkrufky@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-05 14:30:01 -03:00
Mauro Carvalho Chehab
509dd025a4 V4L/DVB (12148): move V4L2_PIX_FMT_SGRBG8 to the proper place
Instead of defining a new pif format on an internal header, move it to
the V4L2 API header.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-05 14:30:00 -03:00
Andy Walls
ff861fb21e V4L/DVB (12182): cx18: Add DVB-T support for Yuan MPC-718 cards with an MT352 or ZL10353
Add DVB-T support for Yuan MPC-718 cards with an MT352 or ZL10353 demodulator.

There are apparently some units with a DiBcom demodulator which could be
supported by one of the dib7000 modules - but this is not implemented in the
cx18 driver (yet).

Due to lack of porgramming details for the MT352 and the mt352 module requiring
a "demod_init" function, a "firmware" must be obtained and loaded to get
DVB-T working for Yuan MPC-718 cards with an MT352.

Tested-by: Steve Firth <firth650@btinternet.com>
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-05 14:29:59 -03:00
Andy Walls
9f38a920b2 V4L/DVB (12181): get_dvb_firmware: Add Yuan MPC718 MT352 DVB-T "firmware" extraction
Add routine to support extracting the MT352 DVB-T demodulator initialization
sequence for Yuan MPC718 cards for use by the cx18 driver.

This routine uses a hueristic for extracting a good sequence.  It should work
on all different versions of the "yuanrap.sys" file, given the way the MT352
tuning sequences are stored in all versions of that file I have seen so far.
However, the current patch simply looks for one specific archive URL.

Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-05 14:29:58 -03:00
Andy Walls
637fb3d70b V4L/DVB (12180): cx18: Update Yuan MPC-718 card entry with better information and guesses
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-05 14:29:58 -03:00
Andy Walls
6e707b4c6d V4L/DVB (12167): tuner-xc2028: Fix 7 MHz DVB-T
The following patch should fix 7 MHz DVB-T with the XC3028 using the
DTV7 firmware from the xc3028-v27.fw firmware image.

Tested-by: Terry Wu <terrywu2009@gmail.com>
[mchehab@redhat.com: thanks to John Ferlito, we have a real test in Australia]
Signed-off-by: Andy Walls <awalls@radix.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-05 14:29:57 -03:00
Guennadi Liakhovetski
c06950ae4d V4L/DVB (12160): soc-camera: fix missing clean up on error path
If soc_camera_init_user_formats() fails in soc_camera_probe(), we have to call
client's .remove() method to unregister the video device.

Reported-by: Kuninori Morimoto <morimoto.kuninori@renesas.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-05 14:29:56 -03:00
Stefan Herbrechtsmeier
14df2ccead V4L/DVB (12159): soc_camera: Fix debug output of supported formats count
The supported formats count must be set to 0 after debug output
right before the second pass.

Signed-off-by: Stefan Herbrechtsmeier <hbmeier@hni.uni-paderborn.de>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-05 14:29:56 -03:00
Hans Verkuil
3175da83a0 V4L/DVB (12153): ttpci: config TTPCI_EEPROM depends on I2C
If I2C is not enabled, then we shouldn't build ttpci_eeprom.c.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-05 14:29:55 -03:00
Mark Brown
f6f1eb1033 ASoC: Factor out WM8580 register cache code
Note the slightly tricky cache usage in the volume update function due
to the requirement for a separate write for the VU bit.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 17:57:57 +01:00
Mark Brown
5f345346dd ASoC: Remove use of hw_read from TLV320AIC3x driver
The TLV320AIC3x driver is currently the only user of the CODEC hw_read
operation and is jumping through some hoops in order to do so.  In order
to support future refactoring to make the hw_read operation more usable
unwrap the usage in this driver to avoid its use.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 17:35:28 +01:00
Mark Brown
1e30a5828e ASoC: Remove unused AK4535 hardware read functionality
Nothing uses it and the existing hw_read operation needs to be
refectored so it's easier to remove it rather than work with it.
Support can be re-added if the code requires volatile registers.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 17:28:41 +01:00
Mark Brown
17a52fd60a ASoC: Begin to factor out register cache I/O functions
A lot of CODECs share the same register data formats and therefore
replicate the code to manage access to and caching of the register
map. In order to reduce code duplication centralised versions of
this code will be introduced with drivers able to configure the use
of the common code by calling the new snd_soc_codec_set_cache_io()
API call during startup.

As an initial user the 7 bit address/9 bit data format used by many
Wolfson devices is supported for write only CODECs and the drivers
with straightforward register cache implementations are converted to
use it.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 17:24:50 +01:00
Artem Bityutskiy
fe96efc1a3 UBI: nicify image sequence number handling
Move the image seq. number handling from I/O level to the scanning
lever, where it really belongs to. Move the @image_seq_set variable
to the @struct ubi_scan_info structure, which exists only during
scanning.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-05 18:47:08 +03:00
Adrian Hunter
0c6c7fa131 UBI: add image sequence number to EC header
An image sequence number is added to the UBI erase-counter header
to be able determine if the root file system contains a mixture
of old and new images (because the flashing failed to complete).

A change to nolo is also needed for this to take effect.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-05 18:47:07 +03:00
Artem Bityutskiy
1398788fe7 UBI: remove bogus debugging checks
The 'paranoid_check_empty()' is bogus because, which is easilly
seen on NOR flash, which has long erase cycles, and which may
easilly end-up with half-erased eraseblocks. In this case the
paranoid check fails. I is just wrong to assume that PEBs which
do not have EC headers always contain all 0xFF. Such assumption
should not be made on the I/O level, which is quite low.

Thus, just kill the check.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-05 18:47:05 +03:00
Artem Bityutskiy
40a71a87fa UBI: add empty eraseblocks verification
This patch adds code which makes sure eraseblocks contain all 0xFF
bytes before starting using them. The verification is done only when
debugging checks are enabled.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-05 18:47:03 +03:00
Artem Bityutskiy
8f6035732a MAINTAINERS: update ahunter's e-mail address
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-05 18:45:19 +03:00
Daniel Mack
7fcd9c3ecb UBIFS: allow more than one volume to be mounted
UBIFS uses a bdi device per volume, but does not care to hand out unique
names to each of them. This causes an error when trying to mount more
than one volumes. Append the UBI volume and device ID to avoid that.

[Amended a bit by Artem Bityutskiy]

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Cc: Adrian Hunter <ext-adrian.hunter@nokia.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-05 18:45:19 +03:00
Artem Bityutskiy
1fb8bd01ed UBIFS: fix assertion warning
When debugging is enabled and an unclean file-system is mounter,
the following assertion is triggered:

UBIFS assert failed in ubifs_tnc_start_commit at 805 (pid 1081)
Call Trace:
[cfaffbd0] [c0006cf8] show_stack+0x44/0x16c (unreliable)
[cfaffc10] [c011b738] ubifs_tnc_start_commit+0xbb8/0xd18
[cfaffc90] [c0112670] do_commit+0x150/0xa44
[cfaffd10] [c0125234] ubifs_rcvry_gc_commit+0xd8/0x544
[cfaffd60] [c0100e9c] ubifs_fill_super+0xe78/0x15f8
[cfaffdf0] [c0102118] ubifs_get_sb+0x20c/0x320
[cfaffe70] [c007f764] vfs_kern_mount+0x58/0xe0
[cfaffe90] [c007f83c] do_kern_mount+0x40/0xf8
[cfaffeb0] [c0095c24] do_mount+0x550/0x758
[cfafff10] [c0095ebc] sys_mount+0x90/0xe0
[cfafff40] [c000ed4c] ret_from_syscall+0x0/0x3c

The reason is that we initialize 'c->min_leb_idx' early, and do
not re-calculate it after journal replay.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-05 18:45:19 +03:00
Adrian Hunter
681947d2fa UBIFS: minor spelling and grammar fixes
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
2009-07-05 18:45:18 +03:00
Adrian Hunter
4473758944 UBIFS: fix 64-bit divisions in debug print
Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
2009-07-05 18:45:18 +03:00
Artem Bityutskiy
cb54ef8b13 UBIFS: few spelling fixes
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-05 18:45:18 +03:00
Artem Bityutskiy
2a35a3a8ab UBIFS: set write-buffer timout to 3-5 seconds
This patch cleans up write-buffer timeout initialization and
sets it to 3-5 interval.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-05 18:45:17 +03:00
Artem Bityutskiy
0b335b9d7d UBIFS: slightly optimize write-buffer timer usage
This patch adds the following minor optimization:

1. If write-buffer does not use the timer, indicate it with the
   wbuf->no_timer variable, instead of using the wbuf->softlimit
   variable. This is better because wbuf->softlimit is of ktime_t
   type, and the ktime_to_ns function contains 64-bit multiplication.

2. Do not call the 'hrtimer_cancel()' function for write-buffers
   which do not use timers.

3. Do not cancel the timer in 'ubifs_put_super()' because the
   synchronization function does this.

This patch also removes a confusing comment.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-05 18:45:16 +03:00
Artem Bityutskiy
70aee2f153 UBIFS: improve debugging messaged
1. Make the I/O debugging message print the journal head number.
2. Add prints to timer functions.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-05 18:45:16 +03:00
Adrian Hunter
e3dc5a665d UBIFS: fix integer overflow warning
Fix the following warning:

fs/ubifs/io.c: In function 'ubifs_wbuf_init':
fs/ubifs/io.c:860: warning: integer overflow in expression

And limit maximum hrtimer delta to ULONG_MAX because the
argument is 'unsigned long'.

Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-05 18:45:15 +03:00
Mark Brown
5420f30723 ASoC: Fix leaks in WM8988 registration error handling
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 16:29:39 +01:00
Mark Brown
1a01417e85 ASoC: Fix WM8960 leaks on probe failure
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 15:47:03 +01:00
Russell King
65b1bfc13e [ARM] pgtable: file pte layout documentation
Document the layout of our file PTE entries.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-05 15:31:35 +01:00
Russell King
fb93a1c75e [ARM] pgtable: swp pte layout documentation, definitions, and check
Document the layout of our swp PTE entries, adding definitions for
the bit masks/shifts/sizes, and implement MAX_SWAPFILES_CHECK()
such that we fail to build if we are unable to properly encode the
swp type field.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-05 15:31:26 +01:00
Russell King
ba9b42e4ff [ARM] export __cpu_flush_dcache_page
Now required for libsas:

  Kernel: arch/arm/boot/Image is ready
  Kernel: arch/arm/boot/zImage is ready
  Building modules, stage 2.
  MODPOST 1096 modules
ERROR: "xscale_flush_kern_dcache_page" [drivers/scsi/libsas/libsas.ko] undefined!

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-07-05 15:25:00 +01:00
Mark Brown
fe5422fc4a ASoC: Fix leaks in WM8731 probe error handling
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 15:18:01 +01:00
Mark Brown
096e49d5e6 ASoC: Add CODEC volatile register operation
Add a volatile_register() operation to the CODEC structure providing a
standard operation to query if a register is volatile. This will be used
to factor out the register cache I/O operations for the CODECs.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 15:12:22 +01:00
Josh Boyer
a22ebd069d powerpc/44x: Fix build error with -Werror for Warp platform
With -Werror enabled during the build, the warp.c file fails to build
due to the temp_isr function not containing a return statement.  This
fixes the build error and documents that the function never returns.

Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-07-05 10:02:15 -04:00
Sean MacLennan
ba703e1a7a powerpc/4xx: Have Warp take advantage of GPIO LEDs default-state = keep
The GPIO LEDS driver now has a default state of "keep".  Update the Warp DTS
and platform file to take advantage of this new state.  This removes the
hardcoding of the two LEDs on the Warp.

Signed-off-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-07-06 08:56:01 -04:00
Sean MacLennan
7c3a742a86 powerpc/44x: Update Warp defconfig
* Enable GPIO LEDS and LED triggers
* Move to SLUB
* Enable HOTPLUG
* Enable timestamps on printks
* Enable UBIFS
* Enable in-kernel config

Signed-off-by: Sean MacLennan <smaclennan@pikatech.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2009-07-06 08:53:16 -04:00
Mauro Carvalho Chehab
c285addb39 V4L/DVB (12134): vivi: bug: don't assume that S_STD will be called before streaming
precalculate_bars() improved vivi performance. However, it assumed that
always before streaming, the driver would call VIDIOC_S_STD. This is not
an API requirement, and the testing apps don't do that.

Due to that, a regression were caused by the patch that added it.

This patch moves the precalculate_bars to the proper place of the code,
calling it at buffer_prepare() callback.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-07-05 10:05:10 -03:00
Troy Kisky
af0adf3e81 ASoC: DaVinci: i2s, add davinci_i2s_prepare and shutdown
If the codec is master then prepare should call
mcbsp_start, not trigger.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 13:14:35 +01:00
Troy Kisky
f5cfa954e6 ASoC: DaVinci: i2s, fix mcbsp_word_length update
Code previously just "ors" in this field without clearing
first. Fix, by never reading this register.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 12:59:08 +01:00
Troy Kisky
9333b594a0 ASoC: DaVinci: i2s, minor cleanup of davinci_i2s_startup
Save a few lines of code.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 12:59:08 +01:00
Troy Kisky
1bef449989 ASoC: DaVinci: i2s, only start sample generator if needed
Only start sample generator if needed, and more
cleanup on davinci_mcbsp_start.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 12:59:07 +01:00
Troy Kisky
eba575c30b ASoC: DaVinci: i2s cleanup
Move variable declaration closer to use.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 12:59:07 +01:00
Troy Kisky
f9af37cc63 ASoc: DaVinci: i2s, minor cleanup
Add davinci_mcbsp_dev as argument to davinci_mcbsp_start
and davinci_mcbsp_stop.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 12:59:07 +01:00
Troy Kisky
c392bec716 ASoC: DaVinci: i2s toggle clock to complete reset
Add toggle_clock function to complete i2s reset earlier.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 12:59:06 +01:00
Troy Kisky
35cf63583d ASoC: DaVinci: i2s, remove MOD_REG_BIT macro
No functional changes. Rename variable w to something
more meaningful. Remove code obfuscating macro MOD_REG_BIT.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-07-05 12:59:06 +01:00
Rafael J. Wysocki
c71320d0c4 genirq: Fix comment describing suspend_device_irqs()
The kerneldoc comment describing suspend_device_irqs() is currently
misleading, because generally the function doesn't really disable
interrupt lines at the chip level.  Replace it with a more accurate
one.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
LKML-Reference: <200907050022.35117.rjw@sisk.pl>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-07-05 13:07:00 +02:00