Commit graph

191,556 commits

Author SHA1 Message Date
Marek Vasut
6ec04f434d [ARM] pxa/palm: fix PalmLD/T5/TX AC97 MFP
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-05-22 18:16:20 +08:00
Coly Li
f5c81a3270 [ARM] pxa: add parameter to clksrc_read() for pxa168/910
This patch modifies parameter of clksrc_read() from 'void' to
'struct clocksource *cs', which fixes compile warning for
incompatible parameter type.

Signed-off-by: Coly Li <coly.li@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-05-22 18:15:49 +08:00
Mingwei Wang
0e1b74df99 [ARM] pxa: fix the incorrectly defined drive strength macros for pxa{168,910}
Signed-off-by: Mingwei Wang <mwwang@marvell.com>
Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-05-22 18:15:31 +08:00
Steven Whitehouse
87ec217411 GFS2: Move gfs2_unlink_ok into ops_inode.c
Another function which is only called from one ops_inode.c so
we move it and make it static.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-05-22 10:54:50 +01:00
Steven Whitehouse
536baf02f6 GFS2: Move gfs2_readlinki into ops_inode.c
Move gfs2_readlinki into ops_inode.c and make it static

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-05-22 10:48:59 +01:00
Steven Whitehouse
2286dbfad1 GFS2: Move gfs2_rmdiri into ops_inode.c
Move gfs2_rmdiri() into ops_inode.c and make it static.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-05-22 10:45:09 +01:00
Steven Whitehouse
9e6e0a128b GFS2: Merge mount.c and ops_super.c into super.c
mount.c only contained a single function, so is not really
worth retaining on its own. All of the super related code
is now either in super.c or ops_fstype.c

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-05-22 10:36:01 +01:00
Peter Ujfalusi
7385ba44f8 ASoC: SDP4030: Use the twl4030_setup_data for headset pop-removal
With this patch the initial headset pop-removal related values are
configured for the twl4030 codec (ramp delay and sysclk).

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-22 10:23:22 +01:00
Peter Ujfalusi
9da28c7b38 ASoC: TWL4030: Add support for platform dependent configuration
twl4030_setup_data structure can be passed from platform drivers to
the codec via the snd_soc_device->codec_data pointer.

Currently the setup data has support for the Headset pop-removal
related configuration, which differs from board to board.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-22 10:23:22 +01:00
Mark Brown
5c82f56736 AsoC: Make snd_soc_read() and snd_soc_write() functions
Should be no impact on the generated code but it helps the compiler
print clearer messages.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2009-05-22 10:22:38 +01:00
Steven Whitehouse
b1e71b0622 GFS2: Clean up some file names
This patch renames the ops_*.c files which have no counterpart
without the ops_ prefix in order to shorten the name and make
it more readable. In addition, ops_address.h (which was very
small) is moved into inode.h and inode.h is cleaned up by
adding extern where required.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2009-05-22 10:01:55 +01:00
Ira Snyder
2e077f8e83 fsldma: fix memory leak on error path in fsl_dma_prep_memcpy()
When preparing a memcpy operation, if the kernel fails to allocate memory
for a link descriptor after the first link descriptor has already been
allocated, then some memory will never be released. Fix the problem by
walking the list of allocated descriptors backwards, and freeing the
allocated descriptors back into the DMA pool.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Li Yang <leoli@freescale.com>
2009-05-22 16:54:42 +08:00
Ira Snyder
776c8943f2 fsldma: snooping is not enabled for last entry in descriptor chain
On the 83xx controller, snooping is necessary for the DMA controller to
ensure cache coherence with the CPU when transferring to/from RAM.

The last descriptor in a chain will always have the End-of-Chain interrupt
bit set, so we can set the snoop bit while adding the End-of-Chain
interrupt bit.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Li Yang <leoli@freescale.com>
2009-05-22 16:53:56 +08:00
Ira Snyder
bcfb7465c0 fsldma: fix infinite loop on multi-descriptor DMA chain completion
When creating a DMA transaction with multiple descriptors, the async_tx
cookie is set to 0 for each descriptor in the chain, excluding the last
descriptor, whose cookie is set to -EBUSY.

When fsl_dma_tx_submit() is run, it only assigns a cookie to the first
descriptor. All of the remaining descriptors keep their original value,
including the last descriptor, which is set to -EBUSY.

After the DMA completes, the driver will update the last completed cookie
to be -EBUSY, which is an error code instead of a valid cookie. This causes
dma_async_is_complete() to always return DMA_IN_PROGRESS.

This causes the fsldma driver to never cleanup the queue of link
descriptors, and the driver will re-run the DMA transaction on the hardware
each time it receives the End-of-Chain interrupt. This causes an infinite
loop.

With this patch, fsl_dma_tx_submit() is changed to assign a cookie to every
descriptor in the chain. The rest of the code then works without problems.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Li Yang <leoli@freescale.com>
2009-05-22 16:51:28 +08:00
Ira Snyder
138ef01851 fsldma: fix "DMA halt timeout!" errors
When using the DMA controller from multiple threads at the same time, it is
possible to get lots of "DMA halt timeout!" errors printed to the kernel
log.

This occurs due to a race between fsl_dma_memcpy_issue_pending() and the
interrupt handler, fsl_dma_chan_do_interrupt(). Both call the
fsl_chan_xfer_ld_queue() function, which does not protect against
concurrent accesses to dma_halt() and dma_start().

The existing spinlock is moved to cover the dma_halt() and dma_start()
functions. Testing shows that the "DMA halt timeout!" errors disappear.

Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu>
Signed-off-by: Li Yang <leoli@freescale.com>
2009-05-22 16:49:17 +08:00
Roel Kluin
f47edc6dab fsldma: fix check on potential fdev->chan[] overflow
Fix the check of potential array overflow when using corrupted channel
device tree nodes.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Li Yang <leoli@freescale.com>
2009-05-22 16:46:52 +08:00
James Morris
2c9e703c61 Merge branch 'master' into next
Conflicts:
	fs/exec.c

Removed IMA changes (the IMA checks are now performed via may_open()).

Signed-off-by: James Morris <jmorris@namei.org>
2009-05-22 18:40:59 +10:00
Li Yang
0899d6349c fsldma: update mailling list address in MAINTAINERS
linuxppc-embedded has been merged into linuxppc-dev.

Signed-off-by: Li Yang <leoli@freescale.com>
2009-05-22 16:39:59 +08:00
Ron Lee
6746136520 slab: fix generic PAGE_POISONING conflict with SLAB_RED_ZONE
A generic page poisoning mechanism was added with commit:
 6a11f75b6a
which destructively poisons full pages with a bitpattern.

On arches where PAGE_POISONING is used, this conflicts with the slab
redzone checking enabled by DEBUG_SLAB, scribbling bits all over its
magic words and making it complain about that quite emphatically.

On x86 (and I presume at present all the other arches which set
ARCH_SUPPORTS_DEBUG_PAGEALLOC too), the kernel_map_pages() operation
is non destructive so it can coexist with the other DEBUG_SLAB
mechanisms just fine.

This patch favours the expensive full page destruction test for
cases where there is a collision and it is explicitly selected.

Signed-off-by: Ron Lee <ron@debian.org>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-05-22 11:01:12 +03:00
Roel Kluin
b9ed7252d2 xen-blkfront: beyond ARRAY_SIZE of info->shadow
Do not go beyond ARRAY_SIZE of info->shadow
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-05-22 09:59:51 +02:00
Michal Simek
aaf22af46f microblaze: Kbuild update
Signed-off-by: Michal Simek <monstr@monstr.eu>
2009-05-22 09:50:46 +02:00
Herbert Xu
3699067381 tcp: Unexport TCPv6 GRO functions
Sinec the TCPv6 GRO functions are used in the same file where
they are defined, we do not need to export them.  This was a
cut-n-paste from the IPv4 code which does need to export them.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-22 00:45:28 -07:00
Hiroshi DOYU
5c651ffaee omap iommu: add MPU_BRIDGE_IOMMU for tidspbridge migration
Currently "tidspbridge" driver uses its own mmu implementation and
will migrate to use this "omap iommu" eventually. This config is
provided to make this migration happen smoothly.

Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2009-05-22 10:17:02 +03:00
Hiroshi DOYU
caf60779a6 omap2 iommu: entries for Kconfig and Makefile
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2009-05-22 10:17:01 +03:00
Hiroshi DOYU
e769421de2 omap iommu: entries for Kconfig and Makefile
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
2009-05-22 10:16:36 +03:00
Inaky Perez-Gonzalez
e069c0cf7c wimax/i2400m: usb: fix device reset on autosuspend while not yet idle
When the i2400m is connected to a network, the host interface (USB)
cannot be suspended. For that to happen, the device has to have
negotiated with the basestation to put the link on IDLE state.

If the host tries to put the device in standby while it is connected
but not idle, the device resets, as the driver should not do that.

To avoid triggering that, when the USB susbsytem requires the driver
to autosuspend the device, the driver checks if the device is not yet
idle. If it is not, the request is rejected (will be retried again
later on after the autosuspend timeout). At some point the device will
enter idle and the request will succeed (unless of course, there is
network traffic, but at that point, there is no idle neither in the
link or the host interface).

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-05-22 00:13:18 -07:00
Zhang Rui
88dff4936c x86: DMI match for the Sony VGN-Z540N as it needs BIOS reboot
x86: DMI match for the Sony VGN-Z540N as it needs BIOS reboot,
see:

  http://bugzilla.kernel.org/show_bug.cgi?id=12901

[ Impact: fix hung reboot on certain systems ]

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <1242963350.32574.53.camel@rzhang-dt>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-22 09:11:30 +02:00
David S. Miller
7d18f11489 net: Fix arg to trace_napi_poll() in netpoll.
Reproted by Stephen Rothwell.

Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-21 23:30:09 -07:00
Takashi Iwai
89b7161c48 Merge branch 'fix/hda' into for-linus
* fix/hda:
  ALSA: hda - fix audio on HP TX25xx series notebooks
2009-05-22 08:23:39 +02:00
Adam Williamson
87488957a6 ALSA: hda - fix audio on HP TX25xx series notebooks
Fixes https://bugtrack.alsa-project.org/alsa-bug/view.php?id=4121

Taken from https://bugzilla.redhat.com/show_bug.cgi?id=498060

Signed-off-by: Adam Williamson <awilliam@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-05-22 08:22:23 +02:00
Michael Ellerman
6eb0ac0389 powerpc/maple: Add a quirk to disable MSI for IPR on Bimini
Something in the HW or FW setup is busted and MSIs aren't working with
IPR on Bimini, so until we figure out exaxtly what's up, we quirk them
out

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-22 16:01:11 +10:00
Paul Mundt
8fc40238b4 sh: Prefer slab_is_available() over after_bootmem.
This kills off after_bootmem and switches to using slab_is_available()
instead. Presently the only place this is used is by the sh64 ioremap,
and there's not much point in keeping the reference around otherwise.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22 14:21:03 +09:00
Paul Mundt
36aa1e32f4 sh: clkfwk: Make clock-cpg usable for non-legacy platforms.
This adds a new SH_CLK_CPG for parts that have CPG support.
SH_CLK_CPG_LEGACY is made to depend on this, and still needs to be set
for platforms that want clock-cpg to register the legacy clocks. With
this new config item in place, it is now possible to start layering more
generic CPG code in place while other platforms transition off of the
legacy clocks.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22 14:00:34 +09:00
Paul Mundt
62fad39be0 sh: Add a NR_IRQS_LEGACY for external IRQ0-7.
This adds a NR_IRQS_LEGACY definition, which will be used by sparse irq.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22 13:50:18 +09:00
Paul Mundt
2f3ed17e01 sh: Wrap irq_to_desc_alloc_cpu() around CONFIG_SPARSE_IRQ temporarily.
irq_to_desc_alloc_cpu() has been renamed to irq_to_desc_alloc_node() in
-next, but as we can not presently enable SPARSE_IRQ without the early
irq_desc alloc patch, protect it with an ifdef until the interface has
settled and we are ready to enable it system-wide.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22 13:47:52 +09:00
Paul Mundt
5f8371cec9 Merge branches 'sh/stable-updates' and 'sh/sparseirq' 2009-05-22 13:29:37 +09:00
Magnus Damm
8e9bb19ef9 video: stop sh_mobile_lcdcfb only if started
This patch fixes the LCDC driver to avoid calling the
function sh_mobile_lcdc_start_stop(priv, 0) unless the
same function has been called before to start the LCDC
hardware.

Triggered when sh_mobile_lcdcfb.c failed to probe() due to
missing MSTP clocks.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22 13:19:15 +09:00
Magnus Damm
37869fa2da sh: ap325 camera without i2c driver fix
This patch fixes the ap325rxa ncm03j camera code to handle
the case where no i2c driver is present. Without this fix
i2c_transfer() may be passed NULL as adapter which results
in a crash.

Triggered when i2c-sh_mobile.c failed to probe() due to
missing MSTP clocks.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22 13:19:11 +09:00
Roel Kluin
7fc1e5c15f sh: clkfwk: beyond ARRAY_SIZE of onchip_ops for sh7722.
Do not go beyond ARRAY_SIZE of onchip_ops

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-05-22 12:58:02 +09:00
Roel Kluin
6470c077ca smack: do not beyond ARRAY_SIZE of data
Do not go beyond ARRAY_SIZE of data

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-05-22 12:34:48 +10:00
Alexander Duyck
e35ec12650 ixgbe: only register DCA requester once
The current driver tries to re-register the DCA requester after reset and
this is not correct.  This change makes it so all we are doing is resetting
the DCA registers after reset and not re-adding the requester.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-21 17:19:10 -07:00
Alexander Duyck
7e0e99ef43 igb: do not re-register DCA requester on device reset
The current driver is re-registering the DCA requester after every reset.
Instead of doing this we should only be updating the on board DCA registers
and not unregistering/re-registering our requester.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-21 17:19:09 -07:00
Michał Mirosław
0d63cbb535 wireless: Use genl_register_family_with_ops()
Use genl_register_family_with_ops() instead of a copy.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-21 16:50:25 -07:00
Michał Mirosław
7ae740df3a netlabel: Use genl_register_family_with_ops()
Use genl_register_family_with_ops() instead of a copy. This fixes genetlink
family leak on error path.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-21 16:50:24 -07:00
Michał Mirosław
8f698d5453 ipvs: Use genl_register_family_with_ops()
Use genl_register_family_with_ops() instead of a copy.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-21 16:50:24 -07:00
Michał Mirosław
acb0a200ae tipc: Use genl_register_family_with_ops()
Use genl_register_family_with_ops() instead of a copy. This also changes
netlink related variable names to be kernel-wide unique for consistency
with other users.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-21 16:50:23 -07:00
Michał Mirosław
502664eeaf irda: Use genl_register_family_with_ops()
Use genl_register_family_with_ops() instead of a copy.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Cc: Samuel Ortiz <samuel@sortiz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-21 16:50:22 -07:00
Michał Mirosław
a7b11d7382 genetlink: Introduce genl_register_family_with_ops()
This introduces genl_register_family_with_ops() that registers a genetlink
family along with operations from a table. This is used to kill copy'n'paste
occurrences in following patches.

Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-21 16:50:22 -07:00
Neil Horman
4ea7e38696 dropmon: add ability to detect when hardware dropsrxpackets
Patch to add the ability to detect drops in hardware interfaces via dropwatch.
Adds a tracepoint to net_rx_action to signal everytime a napi instance is
polled.  The dropmon code then periodically checks to see if the rx_frames
counter has changed, and if so, adds a drop notification to the netlink
protocol, using the reserved all-0's vector to indicate the drop location was in
hardware, rather than somewhere in the code.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>

 include/linux/net_dropmon.h |    8 ++
 include/trace/napi.h        |   11 +++
 net/core/dev.c              |    5 +
 net/core/drop_monitor.c     |  124 ++++++++++++++++++++++++++++++++++++++++++--
 net/core/net-traces.c       |    4 +
 net/core/netpoll.c          |    2
 6 files changed, 149 insertions(+), 5 deletions(-)
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-21 16:50:21 -07:00
Mimi Zohar
c9d9ac525a integrity: move ima_counts_get
Based on discussion on lkml (Andrew Morton and Eric Paris),
move ima_counts_get down a layer into shmem/hugetlb__file_setup().
Resolves drm shmem_file_setup() usage case as well.

HD comment:
  I still think you're doing this at the wrong level, but recognize
  that you probably won't be persuaded until a few more users of
  alloc_file() emerge, all wanting your ima_counts_get().

  Resolving GEM's shmem_file_setup() is an improvement, so I'll say

Acked-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Signed-off-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
2009-05-22 09:45:33 +10:00