/proc/net/igmp6 walks IPv6 multicast memberships under RCU and reads
mca_work.timer.expires to print the remaining multicast timer. The
delayed-work timer can be updated concurrently.
Annotate the intentional lockless procfs snapshot with READ_ONCE().
Signed-off-by: Yuyang Huang <sigefriedhyy@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260609081113.7613-3-sigefriedhyy@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
/proc/net/igmp6 walks IPv6 multicast memberships under RCU and
prints mca_flags without holding idev->mc_lock. The multicast paths
update the field while holding idev->mc_lock.
Annotate this intentional lockless snapshot with READ_ONCE() and the
matching writers with WRITE_ONCE().
Signed-off-by: Yuyang Huang <sigefriedhyy@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260609081113.7613-2-sigefriedhyy@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tls_toe feature and its single user (chelsio chtls) have been
unmaintained for multiple years. It also hooks into the core of the
TCP implementation, and bypasses most of the networking stack.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/1f30e73275c07bf879f547589872d0916025a52e.1781165969.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5 throws ASSERT_RTNL() warnings on timestamp config, because
it tries to update features. mlx5e_hwtstamp_set() calls
netdev_update_features().
I missed this while grepping the drivers because tsconfig goes
through ndo_hwtstamp_set/get, not ethtool ops, even tho the new
uAPI is in ethtool Netlink. We could add a dedicated opt out bit
for mlx5, but NDOs were not supposed to be part of the ethtool locking
conversion in the first place.
The mlx5 features update is related to the "compressed CQE" format
which lacks timestamp, apparently. See commit c0194e2d0e ("net/mlx5e:
Disable rxhash when CQE compress is enabled").
Fixes: f9a3e05114 ("net: ethtool: optionally skip rtnl_lock on Netlink path for SET ops")
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20260611200355.2020663-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip_tunnel_xmit() runs locklessly (dev->lltx == true).
ipgre_err() and ipip_err() also run locklessly.
We need to add READ_ONCE() and WRITE_ONCE() annotations
around t->err_count and t->err_time.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260611165247.2710257-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function checks the HSR_PT_SLAVE_A and HSR_PT_SLAVE_B bitmaps
for emptiness right before calling find_last_bit().
This pass may be avoided, because if the bitmap is empty, the
find_last_bit() returns >= HSR_SEQ_BLOCK_SIZE
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Reviewed-by: Felix Maurer <fmaurer@redhat.com>
Link: https://patch.msgid.link/20260609171545.1051322-1-ynorov@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ACCEPT and DONE are the two downcalls of the handshake genl
family, both intended for use by the trusted handshake agent
(tlshd). ACCEPT already requires GENL_ADMIN_PERM; DONE has
no privilege check at all.
The fd-lookup in handshake_nl_done_doit() only confirms that
some pending handshake request exists for the supplied sockfd;
it does not authenticate the sender. An unprivileged process
that guesses or observes a valid sockfd can therefore submit
a DONE with HANDSHAKE_A_DONE_STATUS == 0, leaving the kernel
consumer to proceed as if the handshake succeeded. A non-zero
status on a forged DONE tears down a legitimate in-flight
handshake before tlshd can report its real result.
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Hannes Reinecke <hare@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260609141831.90694-1-cel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The extended IPv4 L4 header mode in act_pedit can select TCP or UDP
header fields without confirming that the IPv4 protocol field matches
the selected transport header.
That lets a rule written for TCP or UDP modify unrelated payload bytes
in a packet carrying a different protocol.
Verify that the IPv4 header is long enough, that the protocol matches
the selected TCP or UDP header, and that the packet is not a non-initial
fragment before applying TCP or UDP extended header edits.
Cc: stable+noautosel@kernel.org # in real rule sets the match confirms this before calling the action
Signed-off-by: Samuel Moelius <sam.moelius@trailofbits.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ip6_tnl_xmit() and ipip6_tunnel_xmit() run locklessly (dev->lltx == true).
ip6gre_err() and ipip6_err() also run locklessly.
We need to add READ_ONCE() and WRITE_ONCE() annotations
around t->err_count and t->err_time.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260610171458.1359630-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- nxp-nci: Add ISO15693 support
- nxp-nci: treat -ENXIO in IRQ thread as no data available
- nci: uart: Constify struct tty_ldisc_ops
- trf7970a: fix comment typos
- Use named initializers for struct i2c_device_id
- MAINTAINERS: Update address for David Heidelberg
-----BEGIN PGP SIGNATURE-----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=BdKR
-----END PGP SIGNATURE-----
Merge tag 'nfc-net-next-20260611' of https://codeberg.org/linux-nfc/linux
David Heidelberg says:
====================
NFC updates for net-next 20260611
- nxp-nci: Add ISO15693 support
- nxp-nci: treat -ENXIO in IRQ thread as no data available
- nci: uart: Constify struct tty_ldisc_ops
- trf7970a: fix comment typos
- Use named initializers for struct i2c_device_id
- MAINTAINERS: Update address for David Heidelberg
* tag 'nfc-net-next-20260611' of https://codeberg.org/linux-nfc/linux:
MAINTAINERS: Update address for David Heidelberg
nfc: Use named initializers for struct i2c_device_id
nfc: nxp-nci: treat -ENXIO in IRQ thread as no data available
nfc: nxp-nci: Add ISO15693 support
nfc: nci: uart: Constify struct tty_ldisc_ops
nfc: trf7970a: fix comment typos
====================
Link: https://patch.msgid.link/1aed7555-3d24-413c-b284-bc85fdd33055@ixit.cz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Introduce vendor-specific PHY tunable identifiers to control the
KSZ87xx low-loss cable erratum handling through the ethtool PHY
tunable interface.
The following tunables are added:
- a boolean "short-cable" tunable, applying a documented and
conservative preset intended for short or low-loss Ethernet cables;
- an integer LPF bandwidth tunable, allowing advanced adjustment of the
receiver low-pass filter bandwidth;
- an integer DSP EQ initial value tunable, allowing advanced tuning of
the PHY equalizer initialization.
The actual behavior is implemented by the corresponding PHY and switch
drivers.
Reviewed-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Nicolai Buchwitz <nb@tipi-net.de>
Signed-off-by: Fidelio Lawson <fidelio.lawson@exotec.com>
Link: https://patch.msgid.link/20260609-ksz87xx_errata_low_loss_connections-v10-2-9ba4418cf3db@exotec.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mptcp_pm_announced_del_timer() removes the matched ADD_ADDR entry (if
found) from the ADD_ADDR list only if check_id is false. That's
dangerous, and not clear, because it means the caller should be free the
entry only in some cases, and it easy to miss that.
Instead, make it static, and call it from mptcp_pm_add_addr_echoed,
which is the only other case where mptcp_pm_add_addr_del_timer should be
called with check_id set to true. Bonus with that: a second call to
mptcp_pm_add_addr_lookup_by_addr() can be avoided.
Note that instead of adding the signature above to avoid a compilation
issue because this helper is called before the definition of the
function, the whole helper is moved above where it is first called. Its
content is untouched, except the addition of the 'static' keyboard.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-14-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Only used in pm.c.
Note that the signature is added above: it is easier than moving the
code around, because this helper depends on mptcp_pm_schedule_work which
is declared below.
While at it, explicitly mark it as to be called while pm->lock is held.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-13-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to the two previous commits, using the 'add' prefix is
confusing, also confirmed by [1].
Now that the structure has been renamed to include 'add_addr' in its
name, easier to know the timer is linked to the ADD_ADDR, no need to
add the confusing prefix, or an unneeded longer one.
While at it, also update the ADD_ADDR timer helper to clearly specify it
is linked to ADD_ADDR, and it is not there to add a new timer.
Link: https://lore.kernel.org/20251117100745.1913963-1-edumazet@google.com [1]
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-12-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to the previous commit, only using the 'add' or 'anno' prefixes
is confusing -- generally associated to the action of adding something,
or the Latin name for "year" -- and lack of uniformity.
This has been causing issues in the past, e.g. del_add_timer seemed to
suggest the goal is to delete a previously added timer.
Instead, use the mptcp_pm_announced_ prefix.
While at it, slightly improves some helpers:
- mptcp_lookup_anno_list_by_saddr: no need to specify what is used to do
the lookup: mptcp_pm_announced_lookup.
- mptcp_pm_sport_in_anno_list: it doesn't just compare the port, but the
whole address linked to the sublow: mptcp_pm_announced_has_ssk.
- mptcp_pm_alloc_anno_list: it allocates one item of the list, not a
whole list: mptcp_pm_announced_alloc.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-11-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using only the 'add' prefix is confusing: does it refer to a generic
added entry or address, or specifically to ADD_ADDRs. Using add_addr
removes this confusion.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-10-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Similar to most places in the MPTCP code. So instead of passing the
subflow list and use list_for_each_entry(subflow, list, node), pass the
msk and use mptcp_for_each_subflow(msk, subflow).
That's clearer and more uniform with the rest.
While at it, add 'pm_' prefix for the exported one to easily identify
the origin. Plus replace 'lookup' by 'has', because a bool is returned.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-9-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With TCP-timestamps (padded) taking 12 bytes and ADD_ADDR IPv6 + port
taking 30 bytes, the 40-byte limit for the TCP options is reached. In
this case, it is then not possible to send the signal.
To be able to send this ADD_ADDR, the TCP timestamps option can now be
dropped. This is done, when needed by setting the *drop_ts parameter
from mptcp_established_options. This feature is controlled by a new
net.mptcp.add_addr_v6_port_drop_ts sysctl knob, enabled by default.
It is important to keep in mind that dropping the TCP timestamps option
for one packet of the connection could eventually disrupt some
middleboxes: even if it should be unlikely, they could drop the packet
or even block the connection. That's why this new feature can be
controlled by a sysctl knob.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/448
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-6-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With TCP-timestamps (padded) taking 12 bytes and ADD_ADDR IPv6 + port
taking 30 bytes, the 40-byte limit for the TCP options is reached. In
this case, it is then not possible to send the address signal.
The idea is to let MPTCP dropping the TCP-timestamps option for some
specific packets, to be able to send some specific pure ACK carrying >28
bytes of MPTCP options, like with this specific ADD_ADDR. A new
parameter is passed from tcp_established_options to the MPTCP side to
indicate if the TCP TS option is used, and if it should be dropped. The
next commit implements the part on MPTCP side, but split into two
patches to help TCP maintainers to identify the modifications on TCP
side. This feature will be controlled by a new add_addr_v6_port_drop_ts
MPTCP sysctl knob.
It is important to keep in mind that dropping the TCP timestamps option
for one packet of the connection could eventually disrupt some
middleboxes: even if it should be unlikely, they could drop the packet
or even block the connection. That's why this new feature will be
controlled by a sysctl knob.
Note that it would be technically possible to squeeze both options into
the header if the ADD_ADDR is first written, and then the TCP timestamps
without the NOPs preceding it. But this means more modifications on TCP
side, plus some middleboxes could still be disrupted by that.
In this implementation, an unused bit is used in mptcp_out_options
structure to avoid passing an address to a local variable. Reading and
setting it needs CONFIG_MPTCP, so the whole block now has this #if
condition: mptcp_established_options() is then no longer used without
CONFIG_MPTCP.
About alternatives, instead of passing a new boolean (has_ts), another
option would be to pass the whole option structure (opts), but
'struct tcp_out_options' is currently defined in tcp_output.c, and it
would need to be exported. Plus that means the removal of the TCP TS
option would be done on the MPTCP side, and not here on the TCP side.
It feels clearer to remove other TCP options from the TCP side, than
hiding that from the MPTCP side.
Yet an other alternative would be to pass the size already taken by the
other TCP options, and have a way to drop them all when needed. But this
feels better to target only the timestamps option where dropping it
should be safe, even if it is currently the only option that would be
set before MPTCP, when MPTCP is used.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-5-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This sysctl is going to be used in the next commits to drop TCP
timestamps option, to be able to send an ADD_ADDR with a v6 IP address
and a port number. It is enabled by default.
This knob is explicitly disabled in the MPTCP Join selftest, with the
"signal addr list progresses after tx drop" subtest, to continue
verifying the previous behaviour where the ADD_ADDR is not sent due to a
lack of space.
While at it, move syn_retrans_before_tcp_fallback down from struct
mptcp_pernet, to avoid creating another 3 bytes hole.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-4-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mptcp_add_addr_len helper was called twice: in mptcp_pm_add_addr_signal,
then just after in mptcp_established_options_add_addr. Both to check
the remaining space.
The second call is not needed: if there is not enough space,
mptcp_pm_add_addr_signal will return false, and the caller,
mptcp_established_options_add_addr, will do the same without re-checking
the size again. Instead, mptcp_pm_add_addr_signal can directly set the
size.
Note that the returned size can be negative when other suboptions are
dropped, e.g. to send an echo ADD_ADDR with a v4 address, and no port.
While at it:
- move mptcp_add_addr_len to pm.c, as it is now only used from there
- use 'int' in mptcp_add_addr_len for the size, instead of having a mix
- use a bool for 'ret' in mptcp_pm_add_addr_signal
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-3-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mptcp_rm_addr_len helper was called twice: in mptcp_pm_rm_addr_signal,
then just after in mptcp_established_options_rm_addr. Both to check the
remaining space.
The second call is not needed: if there is not enough space,
mptcp_pm_rm_addr_signal will return false, and the caller,
mptcp_established_options_rm_addr, will do the same without re-checking
the size again. Instead, mptcp_pm_rm_addr_signal can directly set the
size.
While at it, move mptcp_rm_addr_len to pm.c, as it is now only used
there, once.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-2-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use a signed int for the returned size, because when other options are
dropped, the size can be negative, e.g. to send an echo ADD_ADDR with a
v4 address, and no port.
The behaviour is not changed, because it was working as expected with an
overflow. But it is clearer like this, and it will help later on.
Even if, for the moment, only the ADD_ADDR size can be negative in some
cases, a signed int is now used for all mptcp_established_options_*()
helpers, not to mismatch the type, and as a question of uniformity.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260605-net-next-mptcp-add-addr6-port-ts-v2-1-758e7ca73f4d@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mr_table.cache_resolve_queue_len is always updated under
spin_lock_bh(&mfc_unres_lock).
Let's convert it to u32.
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260609222013.1550355-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-7.1-rc8).
Conflicts:
drivers/net/ethernet/wangxun/txgbe/txgbe_aml.c
f67aead16e ("net: txgbe: rework service event handling")
57d39faed4 ("net: txgbe: improve functions of AML 40G devices")
net/rds/info.c
512db8267b ("rds: mark snapshot pages dirty in rds_info_getsockopt()")
6e94eeb2a2 ("rds: convert to getsockopt_iter")
Adjacent changes:
include/net/sock.h
1ee90b77b7 ("net: guard timestamp cmsgs to real error queue skbs")
f0de88303d ("net: make is_skb_wmem() available to modules")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Connectionless L2CAP frames carry a two-byte PSM at the start of the
payload. l2cap_recv_frame() currently reads that PSM unconditionally
after validating only the outer L2CAP length.
A malformed connectionless frame with a zero- or one-byte payload can
therefore make the parser read beyond the advertised skb payload and use
tailroom bytes as part of the PSM. A VHCI-backed QEMU reproducer
injected a one-byte connectionless payload and reached the unchecked
read.
Reject connectionless frames that cannot contain the PSM before reading
or pulling it. This preserves all valid connectionless frames while
dropping only structurally incomplete packets.
Assisted-by: Codex:gpt-5.5-cyber-preview
Signed-off-by: Samuel Moelius <sam.moelius@trailofbits.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Read Local Codec Capabilities returns a sequence of capability elements.
Each element starts with a one-byte length followed by that many payload
bytes.
hci_read_codec_capabilities() checks that the skb contains the length
byte, but then validates only caps->len against the remaining skb
length. A malformed controller response with one remaining byte and
caps->len set to one passes that check even though the element needs two
bytes. The parser then records a two-byte capability and copies one
byte beyond the advertised response payload into the codec list.
Validate the full element size, including the length byte, before adding
it to the accumulated capability length. This preserves all well-formed
capability elements and drops only truncated controller responses.
Fixes: 8961987f3f ("Bluetooth: Enumerate local supported codec and cache details")
Assisted-by: Codex:gpt-5.5-cyber-preview
Signed-off-by: Samuel Moelius <sam.moelius@trailofbits.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_chan_timeout() runs asynchronously and accesses chan->conn. If
the connection is torn down while the timer is running or pending,
chan->conn can be freed, leading to a use-after-free when the timer
worker attempts to lock conn->lock:
| BUG: KASAN: slab-use-after-free in instrument_atomic_read_write include/linux/instrumented.h:112 [inline]
| BUG: KASAN: slab-use-after-free in atomic_long_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:4456 [inline]
| BUG: KASAN: slab-use-after-free in __mutex_trylock_fast kernel/locking/mutex.c:161 [inline]
| BUG: KASAN: slab-use-after-free in mutex_lock+0x4f/0xa0 kernel/locking/mutex.c:318
| Write of size 8 at addr ffff8881298d9550 by task kworker/2:1/83
|
| CPU: 2 UID: 0 PID: 83 Comm: kworker/2:1 Not tainted 7.1.0-rc6-next-20260601-dirty #6 PREEMPT(full)
| Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
| Workqueue: events l2cap_chan_timeout
| Call Trace:
| <TASK>
| instrument_atomic_read_write include/linux/instrumented.h:112 [inline]
| atomic_long_try_cmpxchg_acquire include/linux/atomic/atomic-instrumented.h:4456 [inline]
| __mutex_trylock_fast kernel/locking/mutex.c:161 [inline]
| mutex_lock+0x4f/0xa0 kernel/locking/mutex.c:318
| l2cap_chan_timeout+0x5d/0x1b0 net/bluetooth/l2cap_core.c:422
| process_one_work kernel/workqueue.c:3326 [inline]
| process_scheduled_works+0x7c8/0xfb0 kernel/workqueue.c:3409
| worker_thread+0x8a9/0xcf0 kernel/workqueue.c:3490
| kthread+0x346/0x430 kernel/kthread.c:436
| ret_from_fork+0x1a3/0x470 arch/x86/kernel/process.c:158
| ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
| </TASK>
|
| Allocated by task 320:
| l2cap_conn_add+0xa7/0x820 net/bluetooth/l2cap_core.c:7075
| l2cap_connect_cfm+0xdb/0xd70 net/bluetooth/l2cap_core.c:7452
| hci_connect_cfm include/net/bluetooth/hci_core.h:2139 [inline]
| hci_remote_features_evt+0x52f/0x9f0 net/bluetooth/hci_event.c:3760
| hci_event_func net/bluetooth/hci_event.c:7796 [inline]
| hci_event_packet+0x561/0xa70 net/bluetooth/hci_event.c:7847
| hci_rx_work+0x370/0x890 net/bluetooth/hci_core.c:4040
| process_one_work kernel/workqueue.c:3326 [inline]
| process_scheduled_works+0x7c8/0xfb0 kernel/workqueue.c:3409
| worker_thread+0x8a9/0xcf0 kernel/workqueue.c:3490
| kthread+0x346/0x430 kernel/kthread.c:436
| ret_from_fork+0x1a3/0x470 arch/x86/kernel/process.c:158
| ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
|
| Freed by task 322:
| hci_disconn_cfm include/net/bluetooth/hci_core.h:2154 [inline]
| hci_conn_hash_flush+0x101/0x1f0 net/bluetooth/hci_conn.c:2736
| hci_dev_close_sync+0x889/0xde0 net/bluetooth/hci_sync.c:5405
| hci_dev_do_close net/bluetooth/hci_core.c:502 [inline]
| hci_unregister_dev+0x1f7/0x370 net/bluetooth/hci_core.c:2679
| vhci_release+0x12a/0x180 drivers/bluetooth/hci_vhci.c:690
| __fput+0x369/0x890 fs/file_table.c:510
| task_work_run+0x160/0x1d0 kernel/task_work.c:233
| get_signal+0xf5b/0x1120 kernel/signal.c:2810
| arch_do_signal_or_restart+0x4d/0x600 arch/x86/kernel/signal.c:337
| __exit_to_user_mode_loop kernel/entry/common.c:64 [inline]
| exit_to_user_mode_loop+0x85/0x510 kernel/entry/common.c:98
| do_syscall_64+0x263/0x3d0 arch/x86/entry/syscall_64.c:100
| entry_SYSCALL_64_after_hwframe+0x77/0x7f
|
| The buggy address belongs to the object at ffff8881298d9400
| which belongs to the cache kmalloc-512 of size 512
| The buggy address is located 336 bytes inside of
| freed 512-byte region [ffff8881298d9400, ffff8881298d9600)
Fix it by having chan->conn hold a reference to l2cap_conn (via
l2cap_conn_get) when the channel is added to the connection, and
releasing it in the channel destructor. This ensures the l2cap_conn
remains alive as long as the channel exists.
A new FLAG_DEL channel flag is introduced to indicate that the channel
has been deleted from its connection. l2cap_chan_del() atomically sets
this flag using test_and_set_bit() instead of setting chan->conn to
NULL. All asynchronous workers (l2cap_chan_timeout, l2cap_ack_timeout,
l2cap_monitor_timeout, l2cap_retrans_timeout) and l2cap_chan_send()
check FLAG_DEL to determine whether the channel has been torn down,
rather than testing chan->conn for NULL.
Fixes: 8c8e620467 ("Bluetooth: L2CAP: use chan timer to close channels in cleanup_listen()")
Cc: <stable@vger.kernel.org>
Cc: Siwei Zhang <oss@fourdim.xyz>
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Assisted-by: Gemini:gemini-3.1-pro-preview
Reported-by: https://sashiko.dev/#/patchset/20260521021249.3258069-1-oss%40fourdim.xyz
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Many bluetooth source files are missing SPDX-License-Identifier
lines. Add appropriate IDs to these files, and remove other
license lines from the headers.
Leave the warranty disclaimer in files where the license ID is
GPL-2.0 but the wording of the disclaimer is slightly different
from that of the GPL v2 disclaimer.
It is not different enough to cause licensing conflicts, but is
kept to honor the original contributors' legal intent.
Signed-off-by: Tim Bird <tim.bird@sony.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_unregister_dev() does not disable cmd_timer and ncmd_timer
before the hci_dev structure is freed. If a timeout fires
during device teardown, the callback dereferences freed memory
(including the hdev->reset function pointer), leading to a
use-after-free.
Add disable_delayed_work_sync() calls alongside the existing
disable_work_sync() calls to ensure both timers are fully
quiesced before teardown proceeds.
Fixes: 0d151a1037 ("Bluetooth: hci_core: cancel all works upon hci_unregister_dev()")
Signed-off-by: Jordan Walters <jaggyaur@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
eir_create_adv_data() builds the advertising data into a fixed-size
buffer ("size", 31 for the legacy path). It may prepend a 3-byte "Flags"
AD structure (LE_AD_NO_BREDR on an LE-only controller) and then copies
the per-instance data without checking that it still fits:
memcpy(ptr, adv->adv_data, adv->adv_data_len);
tlv_data_max_len() only reserves those 3 bytes when the user-supplied
flags carry a managed-flags bit, so an instance added with flags == 0 is
accepted with adv_data_len up to the full buffer. At advertise time the
flags are still prepended, and the memcpy() writes 3 + adv_data_len
bytes into the size-byte buffer:
BUG: KASAN: stack-out-of-bounds in eir_create_adv_data (net/bluetooth/eir.c:301)
Write of size 31 at addr ffff88800a547bdc by task kworker/u9:0/65
Workqueue: hci0 hci_cmd_sync_work
__asan_memcpy (mm/kasan/shadow.c:106)
eir_create_adv_data (net/bluetooth/eir.c:301)
hci_update_adv_data_sync (net/bluetooth/hci_sync.c:1310)
hci_schedule_adv_instance_sync (net/bluetooth/hci_sync.c:1817)
hci_cmd_sync_work (net/bluetooth/hci_sync.c:332)
This frame has 1 object:
[32, 64) 'cp'
The "Flags" structure is added by the kernel, not requested by
userspace, so only prepend it when it fits together with the instance
advertising data; when there is no room for both, drop the flags rather
than the user-provided data.
Reachable by a local user with CAP_NET_ADMIN owning an LE-only
controller on the legacy advertising path.
Fixes: b44133ff03 ("Bluetooth: Support the "discoverable" adv flag")
Reported-by: Xiang Mei <xmei5@asu.edu>
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support for using HCI_LE_Set_Host_Feature [v2] instead of v1
if LL Extented Features is supported and the controller supports the
command.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Convert SCO socket's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of put_user()/copy_to_user()
- Drop the open-coded ptr cursor in BT_CODEC; iter_out advances on
every copy_to_iter() naturally
- Add linux/uio.h for copy_to_iter()
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Convert L2CAP socket's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *sopt
- Use sopt->optlen for buffer length (input)
- Use copy_to_iter() instead of put_user()/copy_to_user()
- Add linux/uio.h for copy_to_iter()
The sockopt_t parameter is named sopt rather than opt to avoid
collision with the existing local u32 opt used by L2CAP_LM. The same
naming is reused for the new u32 helper in l2cap_sock_getsockopt(),
with mtu and mval helpers covering the u16 and u8 cases.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Convert RFCOMM socket's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *sopt
- Use sopt->optlen for buffer length (input)
- Use copy_to_iter() instead of put_user()/copy_to_user()
- Add linux/uio.h for copy_to_iter()
The sockopt_t parameter is named sopt rather than opt to avoid
collision with the existing local u32 opt used by RFCOMM_LM.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Convert ISO socket's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *opt
- Use opt->optlen for buffer length (input) and returned size (output)
- Use copy_to_iter() instead of put_user()/copy_to_user()
- Add linux/uio.h for copy_to_iter()
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Convert HCI socket's getsockopt implementation to use the new
getsockopt_iter callback with sockopt_t.
Key changes:
- Replace (char __user *optval, int __user *optlen) with sockopt_t *sopt
- Use sopt->optlen for buffer length (input)
- Use copy_to_iter() instead of put_user()/copy_to_user()
- Add linux/uio.h for copy_to_iter()
The sockopt_t parameter is named sopt rather than opt to avoid
collision with the existing local int opt used by HCI_DATA_DIR and
HCI_TIME_STAMP.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In hci_sock_getsockopt_old(), HCI_DATA_DIR and HCI_TIME_STAMP both store
their value into a local int and then call put_user(opt, optval). Because
optval is the function parameter typed char __user *, put_user sizes the
write from sizeof(*optval), so only the low byte of the int is copied to
userspace.
The matching setsockopt path reads sizeof(int) via copy_safe_from_sockptr,
so userspace passes a 4-byte buffer in both directions but previously got
back only one initialized byte on the read side.
Not sending this through 'net' tree given this bug is mostly invisble,
given opt is 0/1, and the last byte is being properly copied.
With this change, the upcoming translation to .getsockopt_iter becomes
mechanical.
FWIW: This behavior appeared in commit 1da177e4c3 ("Linux-2.6.12-rc2").
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Now that AES-CMAC has a library API, convert net/bluetooth/smp.c to use
it instead of the "cmac(aes)" crypto_shash. Since the library API
doesn't require dynamic memory allocation, we no longer need to pass a
crypto_shash object down the call stack and can simply allocate the
aes_cmac_key on the stack in smp_aes_cmac() (renamed from aes_cmac()).
The result is simpler and faster code that no longer relies on the
error-prone loading of algorithms by name.
Note that the maximum stack usage actually decreases slightly, despite
the expanded AES key being moved to the stack. This is because the old
code called crypto_shash_tfm_digest(), which allocates 384 bytes on the
stack for a maximally-sized hash descriptor for any algorithm. The new
code instead declares a 288-byte aes_cmac_key, then calls aes_cmac()
which declares a 32-byte aes_cmac_ctx. Since 288 + 32 < 384, the
maximum stack usage decreases. I.e. the entire expanded AES key easily
fits in the space that the generic crypto API was wasting before.
I didn't add zeroization of the aes_cmac_key, since smp_aes_cmac()
already copies the raw key to the stack without zeroizing it.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Remove several kconfig selections that are no longer needed:
- CRYPTO_SKCIPHER and CRYPTO_ECB have been unneeded since
commit a4770e1117 ("Bluetooth: Switch SMP to
crypto_cipher_encrypt_one()") in 2016.
- CRYPTO_SHA256 has been unneeded since
commit e7b02296fb ("Bluetooth: Remove BT_HS") in 2024.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
6lowpan.c has theoretically conflicting lock orderings, which lockdep
complains about:
a) rtnl_lock > hdev->workqueue
from 6lowpan.c:delete_netdev -> rtnl_lock -> device_del
-> put_device(parent) -> hci_release_dev -> destroy_workqueue
b) hdev->workqueue > l2cap_conn->lock > chan->lock > rtnl_lock
from hci_rx_work -> 6lowpan.c:chan_ready_cb
-> lowpan_register_netdev, ifup -> rtnl_lock
Actual deadlock appears not possible, as hci_rx_work is disabled and
l2cap_conn flushed already on hdev unregister. Hence, do minimal thing
to make lockdep happy by breaking chain a) by holding hdev refcount
until after netdev put in 6lowpan.c.
Fixes the lockdep complaint:
WARNING: possible circular locking dependency detected.
kworker/0:1/11 is trying to acquire lock:
ffff8880023b3940 ((wq_completion)hci0#2){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x8b/0x130
but task is already holding lock:
ffffffff95e4f9c0 (rtnl_mutex){+.+.}-{4:4}, at: lowpan_unregister_netdev+0xd/0x30
Workqueue: events delete_netdev
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
'struct tty_ldisc_ops' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
11454 3352 256 15062 3ad6 net/nfc/nci/uart.o
After:
=====
text data bss dec hex filename
11646 3160 256 15062 3ad6 net/nfc/nci/uart.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://patch.msgid.link/c756755a72cdfde2877a18ddee01eaa4f633c220.1778443960.git.christophe.jaillet@wanadoo.fr
Signed-off-by: David Heidelberg <david@ixit.cz>
sch_cbs and sch_taprio print ecmd.base.speed, even if
netif_get_link_ksettings() failed. When netif_get_link_ksettings()
fails the ecmd may not be initialized.
Use the always-initialized speed variable instead.
The semantics change slightly because UNKNOWN will
never be printed, but that doesn't seem important
enough to complicate the code for.
This is a _dbg() print, anyway.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260609183353.1109641-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This is a minor performance / conceptual fix.
1) ip6erspan_tunnel_xmit()
ERSPAN tunnel can mirror both IPv4 and IPv6 traffic, skb
(the packet being mirrored) can be an IPv4 packet,
and thus dst can be an IPv4 destination entry
Use dst_mtu() which contains generic logic for both families.
2) ip4ip6_err()
skb2 has been prepared as an IPv4 packet, and its destination
is an IPv4 route.
dst6_mtu() is optimized for IPv6 destinations and uses INDIRECT_CALL_1
to call ip6_mtu() directly if the ops match.
We should use dst4_mtu() instead.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20260609091337.2672441-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Various AI scan tools may complain that we don't support resuming
the cap dump. This is true, but the cap dumps are tiny.
net_shaper_nl_cap_pre_dumpit() sets up the dump for just
one device, so the size of the dump scales with NET_SHAPER_SCOPE_MAX (3).
We don't expect them to ever need more than a 4kB page.
Document this.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20260609183224.1108521-5-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
