Add a check in remove_range_from_remap_tree() after we call
btrfs_lookup_block_group(), to check if it is NULL. This shouldn't
happen, but if it does we at least get an error rather than a segfault.
Reported-by: Chris Mason <clm@fb.com>
Link: https://lore.kernel.org/linux-btrfs/20260125125129.2245240-1-clm@meta.com/
Fixes: 979e1dc3d6 ("btrfs: handle deletions from remapped block group")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_abort_transaction(), unlike btrfs_commit_transaction(), doesn't
also free the transaction handle. Fix the instances in
btrfs_last_identity_remap_gone() where we're also leaking the
transaction on abort.
Reported-by: Chris Mason <clm@fb.com>
Link: https://lore.kernel.org/linux-btrfs/20260125125129.2245240-1-clm@meta.com/
Fixes: 979e1dc3d6 ("btrfs: handle deletions from remapped block group")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If the call to btrfs_translate_remap() in btrfs_map_block() returns an
error code, we were leaking the chunk map. Fix it by jumping to out
rather than returning directly.
Reported-by: Chris Mason <clm@fb.com>
Link: https://lore.kernel.org/linux-btrfs/20260125125830.2352988-1-clm@meta.com/
Fixes: 18ba649928 ("btrfs: redirect I/O for remapped block groups")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix a chunk map leak in btrfs_map_block(): if we return early with -EINVAL,
we're not freeing the chunk map that we've just looked up.
Fixes: 0ae653fbec ("btrfs: reduce chunk_map lookups in btrfs_map_block()")
CC: stable@vger.kernel.org # 6.12+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit d7f67ac9a9 ("btrfs: relax block-group-tree feature dependency
checks") introduced a regression when it comes to handling unsupported
incompat or compat_ro flags. Beforehand we only printed the flags that
we didn't recognize, afterwards we printed them all, which is less
useful. Fix the error handling so it behaves like it used to.
Fixes: d7f67ac9a9 ("btrfs: relax block-group-tree feature dependency checks")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix the error message in btrfs_delete_subvolume() if we can't delete a
subvolume because it has an active swapfile: we were printing the number
of the parent rather than the target.
Fixes: 60021bd754 ("btrfs: prevent subvol with swapfile from being deleted")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Commit b471965fdb ("btrfs: fix replace/scrub failure with
metadata_uuid") fixed the comparison in scrub_verify_one_metadata() to
use metadata_uuid rather than fsid, but left the warning as it was. Fix
it so it matches what we're doing.
Fixes: b471965fdb ("btrfs: fix replace/scrub failure with metadata_uuid")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix a copy-paste error in check_extent_data_ref(): we're printing root
as in the message above, we should be printing objectid.
Fixes: f333a3c7e8 ("btrfs: tree-checker: validate dref root and objectid")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix the error message in check_dev_extent_item(), when an overlapping
stripe is encountered. For dev extents, objectid is the disk number and
offset the physical address, so prev_key->objectid should actually be
prev_key->offset.
(I can't take any credit for this one - this was discovered by Chris and
his friend Claude.)
Reported-by: Chris Mason <clm@fb.com>
Fixes: 008e2512dc ("btrfs: tree-checker: add dev extent item checks")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix the error message in btrfs_delete_delayed_dir_index() if
__btrfs_add_delayed_item() fails: the message says root, inode, index,
error, but we're actually passing index, root, inode, error.
Fixes: adc1ef55dc ("btrfs: add details to error messages at btrfs_delete_delayed_dir_index()")
Signed-off-by: Mark Harmstone <mark@harmstone.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When unmounting a filesystem we will try, among many other things, to
commit the super block. On a filesystem that was shutdown, though, this
will always fail with -EROFS as writes are forbidden on this context;
and an error will be reported.
Don't commit the super block on this situation, which should be fine as
the filesystem is frozen before shutdown and, therefore, it should be at
a consistent state.
Signed-off-by: Miquel Sabaté Solà <mssola@mssola.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In this function the 'pages' object is never freed in the hopes that it is
picked up by btrfs_uring_read_finished() whenever that executes in the
future. But that's just the happy path. Along the way previous
allocations might have gone wrong, or we might not get -EIOCBQUEUED from
btrfs_encoded_read_regular_fill_pages(). In all these cases, we go to a
cleanup section that frees all memory allocated by this function without
assuming any deferred execution, and this also needs to happen for the
'pages' allocation.
Fixes: 34310c442e ("btrfs: add io_uring command for encoded reads (ENCODED_READ ioctl)")
Signed-off-by: Miquel Sabaté Solà <mssola@mssola.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We compared rfer_cmpr against excl_cmpr_sum instead of rfer_cmpr_sum
which is confusing.
I expect that
rfer_cmpr == excl_cmpr in squota, but it is much better to be consistent
in case of any surprises or bugs.
Reported-by: Chris Mason <clm@meta.com>
Link: https://lore.kernel.org/linux-btrfs/cover.1764796022.git.boris@bur.io/T/#mccb231643ffd290b44a010d4419474d280be5537
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This WARN_ON(ret) is never executed since the previous if statement makes
us jump into the 'out_put' label when ret is not zero. The existing
transaction abort inside the if statement also gives us a stack trace,
so we don't need to move the WARN_ON(ret) into the if statement either.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We are logging messages as warnings but they should really have an error
level instead, as if the respective conditions are met the mount will
fail. So convert them to error level and also log the error code returned
by read_tree_block().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is no need to call btrfs_handle_fs_error() (which we are trying to
deprecate) if we fail to recover log trees:
1) Such a failure results in failing the mount immediately;
2) If the recovery started a transaction before failing, it has already
aborted the transaction down in the call chain.
So remove the btrfs_handle_fs_error() call, replace it with an error
message and assert that the FS is in error state (so that no partial
updates are committed due to a transaction that was not aborted).
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we fail to start the UUID rescan kthread, btrfs_check_uuid_tree() logs
an error message and returns the error to the single caller, open_ctree().
This however is redundant since the caller already logs an error message,
which is also more informative since it logs the error code. Some remove
the warning message from btrfs_check_uuid_tree() as it doesn't add any
value.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Failure to read the fs root results in a mount error, but we log a warning
message. Same goes for checking the UUID tree, an error results in a mount
failure but we log a warning message. Change the level of the logged
messages from warning to error.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
Commit c28214bde6 ("btrfs: refactor the main loop of
cow_file_range()") refactored the handling of COWing one range.
However it changed the error handling of the reserved extent.
The old cleanup looks like this:
out_drop_extent_cache:
btrfs_drop_extent_map_range(inode, start, start + cur_alloc_size - 1, false);
out_reserve:
btrfs_dec_block_group_reservations(fs_info, ins.objectid);
btrfs_free_reserved_extent(fs_info, ins.objectid, ins.offset, true);
[...]
clear_bits = EXTENT_LOCKED | EXTENT_DELALLOC | EXTENT_DELALLOC_NEW |
EXTENT_DEFRAG | EXTENT_CLEAR_META_RESV;
page_ops = PAGE_UNLOCK | PAGE_START_WRITEBACK | PAGE_END_WRITEBACK;
/*
* For the range (2). If we reserved an extent for our delalloc range
* (or a subrange) and failed to create the respective ordered extent,
* then it means that when we reserved the extent we decremented the
* extent's size from the data space_info's bytes_may_use counter and
* incremented the space_info's bytes_reserved counter by the same
* amount. We must make sure extent_clear_unlock_delalloc() does not try
* to decrement again the data space_info's bytes_may_use counter,
* therefore we do not pass it the flag EXTENT_CLEAR_DATA_RESV.
*/
if (cur_alloc_size) {
extent_clear_unlock_delalloc(inode, start,
start + cur_alloc_size - 1,
locked_folio, &cached, clear_bits,
page_ops);
btrfs_qgroup_free_data(inode, NULL, start, cur_alloc_size, NULL);
}
Which only calls EXTENT_CLEAR_META_RESV.
As the reserved extent is properly handled by
btrfs_free_reserved_extent().
However the new cleanup is:
extent_clear_unlock_delalloc(inode, file_offset, cur_end, locked_folio, cached,
EXTENT_LOCKED | EXTENT_DELALLOC |
EXTENT_DELALLOC_NEW |
EXTENT_DEFRAG | EXTENT_DO_ACCOUNTING,
PAGE_UNLOCK | PAGE_START_WRITEBACK |
PAGE_END_WRITEBACK);
btrfs_qgroup_free_data(inode, NULL, file_offset, cur_len, NULL);
btrfs_dec_block_group_reservations(fs_info, ins->objectid);
btrfs_free_reserved_extent(fs_info, ins->objectid, ins->offset, true);
The flag EXTENT_DO_ACCOUNTING implies both EXTENT_CLEAR_META_RESV and
EXTENT_CLEAR_DATA_RESV, which will release the bytes_may_use, which
later btrfs_free_reserved_extent() will do again, causing incorrect
double release (and may underflow bytes_may_use).
[FIX]
Use EXTENT_CLEAR_META_RESV to replace EXTENT_DO_ACCOUNTING, and add back
the comments on why we only use EXTENT_CLEAR_META_RESV.
Fixes: c28214bde6 ("btrfs: refactor the main loop of cow_file_range()")
Reported-by: Chris Mason <clm@meta.com>
Link: https://lore.kernel.org/linux-btrfs/20260208184920.1102719-1-clm@meta.com/
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Coverity (ID: 1226842) reported that the return value of
btrfs_discard_extent() is assigned to ret but is immediately
overwritten by unpin_extent_range() without being checked.
Use the same error handling that is done later in the same function.
Signed-off-by: Jingkai Tan <contact@jingk.ai>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Fix netfslib such that when it's making an unbuffered or DIO write, to make
sure that it sends each subrequest strictly sequentially, waiting till the
previous one is 'committed' before sending the next so that we don't have
pieces landing out of order and potentially leaving a hole if an error
occurs (ENOSPC for example).
This is done by copying in just those bits of issuing, collecting and
retrying subrequests that are necessary to do one subrequest at a time.
Retrying, in particular, is simpler because if the current subrequest needs
retrying, the source iterator can just be copied again and the subrequest
prepped and issued again without needing to be concerned about whether it
needs merging with the previous or next in the sequence.
Note that the issuing loop waits for a subrequest to complete right after
issuing it, but this wait could be moved elsewhere allowing preparatory
steps to be performed whilst the subrequest is in progress. In particular,
once content encryption is available in netfslib, that could be done whilst
waiting, as could cleanup of buffers that have been completed.
Fixes: 153a9961b5 ("netfs: Implement unbuffered/DIO write support")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/58526.1772112753@warthog.procyon.org.uk
Tested-by: Steve French <sfrench@samba.org>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Since commit af37511305 ("firmware: cs_dsp: Don't require client to
provide a struct cs_dsp_client_ops") the client doesn't have to provide
a struct cs_dsp_client_ops. So remove the dummy cs_dsp_client_ops.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20260226124115.1811187-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In page addressing mode, the pixel values of a dirty rectangle must be sent
to the display controller one page at a time. The range of pages
corresponding to a given rectangle is being incorrectly calculated as if
the Y value of the top left coordinate of the rectangle was 0. This can
result in rectangle updates being displayed on wrong parts of the screen.
Fix the above issue by consolidating the start page calculation in a single
place at the beginning of the update_rect function, and using the
calculated value for all addressing modes.
Fixes: b0daaa5cfa ("drm/ssd130x: Support page addressing mode")
Signed-off-by: Francesco Lavra <flavra@baylibre.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patch.msgid.link/20260210180932.736502-1-flavra@baylibre.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
One quirk and a fix for handling of exotic peripherals on cs42l43.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmmgOOkACgkQJNaLcl1U
h9BmNQf/U42WZyfPuTmtNH8YvPIm3UqE2kyzYhE37FvM3/JUrz34fiL0pB4SeUHE
FR2UQepV6k5jQtkLbzRuLAQnAeast5UB8QrYwc4iPvu7O90GzQeINBX3gN7Q4tuq
FDWdO+yANrWruz4WC5OVxoHhEkYTvwTIwySMlansrP6i8mxDazi6Nbf+adzI9rLM
f0CXUoT/Wn5+XX0L4lJe1E1Tiuzy/be6rKWvTvO91zQPINbYmKwDe3AJpaMq27Kb
k6tyVE+eIY9XFHLGD4R4ojr252wm/4JplxQeOSCU7SNQGDiTqSx+jHZRp7gEJ8qx
NY7QnD976usyenVCEBLbx0OdiDhtnw==
=2O9T
-----END PGP SIGNATURE-----
Merge tag 'asoc-fix-v7.0-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v7.0
One quirk and a fix for handling of exotic peripherals on cs42l43.
In decode_choice(), the boundary check before get_len() uses the
variable `len`, which is still 0 from its initialization at the top of
the function:
unsigned int type, ext, len = 0;
...
if (ext || (son->attr & OPEN)) {
BYTE_ALIGN(bs);
if (nf_h323_error_boundary(bs, len, 0)) /* len is 0 here */
return H323_ERROR_BOUND;
len = get_len(bs); /* OOB read */
When the bitstream is exactly consumed (bs->cur == bs->end), the check
nf_h323_error_boundary(bs, 0, 0) evaluates to (bs->cur + 0 > bs->end),
which is false. The subsequent get_len() call then dereferences
*bs->cur++, reading 1 byte past the end of the buffer. If that byte
has bit 7 set, get_len() reads a second byte as well.
This can be triggered remotely by sending a crafted Q.931 SETUP message
with a User-User Information Element containing exactly 2 bytes of
PER-encoded data ({0x08, 0x00}) to port 1720 through a firewall with
the nf_conntrack_h323 helper active. The decoder fully consumes the
PER buffer before reaching this code path, resulting in a 1-2 byte
heap-buffer-overflow read confirmed by AddressSanitizer.
Fix this by checking for 2 bytes (the maximum that get_len() may read)
instead of the uninitialized `len`. This matches the pattern used at
every other get_len() call site in the same file, where the caller
checks for 2 bytes of available data before calling get_len().
Fixes: ec8a8f3c31 ("netfilter: nf_ct_h323: Extend nf_h323_error_boundary to work on bits as well")
Signed-off-by: Vahagn Vardanian <vahagn@redrays.io>
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20260225130619.1248-2-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In cs35l56_hda_posture_put() assign ucontrol->value.integer.value[0] to
a long instead of an unsigned long. ucontrol->value.integer.value[0] is
a long.
This fixes the sparse warning:
sound/hda/codecs/side-codecs/cs35l56_hda.c:256:20: warning: unsigned value
that used to be signed checked against zero?
sound/hda/codecs/side-codecs/cs35l56_hda.c:252:29: signed value source
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 73cfbfa9ca ("ALSA: hda/cs35l56: Add driver for Cirrus Logic CS35L56 amplifier")
Link: https://patch.msgid.link/20260226111728.1700431-1-rf@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The driver obtains sw_attr.num_ifs from firmware via dpsw_get_attributes()
but never validates it against DPSW_MAX_IF (64). This value controls
iteration in dpaa2_switch_fdb_get_flood_cfg(), which writes port indices
into the fixed-size cfg->if_id[DPSW_MAX_IF] array. When firmware reports
num_ifs >= 64, the loop can write past the array bounds.
Add a bound check for num_ifs in dpaa2_switch_init().
dpaa2_switch_fdb_get_flood_cfg() appends the control interface (port
num_ifs) after all matched ports. When num_ifs == DPSW_MAX_IF and all
ports match the flood filter, the loop fills all 64 slots and the control
interface write overflows by one entry.
The check uses >= because num_ifs == DPSW_MAX_IF is also functionally
broken.
build_if_id_bitmap() silently drops any ID >= 64:
if (id[i] < DPSW_MAX_IF)
bmap[id[i] / 64] |= ...
Fixes: 539dda3c5d ("staging: dpaa2-switch: properly setup switching domains")
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://patch.msgid.link/SYBPR01MB78812B47B7F0470B617C408AAF74A@SYBPR01MB7881.ausprd01.prod.outlook.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
udpgro_frglist.sh and udpgro_bench.sh are the flakiest tests
currently in NIPA. They fail in the same exact way, TCP GRO
test stalls occasionally and the test gets killed after 10min.
These tests use veth to simulate GRO. They attach a trivial
("return XDP_PASS;") XDP program to the veth to force TSO off
and NAPI on.
Digging into the failure mode we can see that the connection
is completely stuck after a burst of drops. The sender's snd_nxt
is at sequence number N [1], but the receiver claims to have
received (rcv_nxt) up to N + 3 * MSS [2]. Last piece of the puzzle
is that senders rtx queue is not empty (let's say the block in
the rtx queue is at sequence number N - 4 * MSS [3]).
In this state, sender sends a retransmission from the rtx queue
with a single segment, and sequence numbers N-4*MSS:N-3*MSS [3].
Receiver sees it and responds with an ACK all the way up to
N + 3 * MSS [2]. But sender will reject this ack as TCP_ACK_UNSENT_DATA
because it has no recollection of ever sending data that far out [1].
And we are stuck.
The root cause is the mess of the xmit return codes. veth returns
an error when it can't xmit a frame. We end up with a loss event
like this:
-------------------------------------------------
| GSO super frame 1 | GSO super frame 2 |
|-----------------------------------------------|
| seg | seg | seg | seg | seg | seg | seg | seg |
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
-------------------------------------------------
x ok ok <ok>| ok ok ok <x>
\\
snd_nxt
"x" means packet lost by veth, and "ok" means it went thru.
Since veth has TSO disabled in this test it sees individual segments.
Segment 1 is on the retransmit queue and will be resent.
So why did the sender not advance snd_nxt even tho it clearly did
send up to seg 8? tcp_write_xmit() interprets the return code
from the core to mean that data has not been sent at all. Since
TCP deals with GSO super frames, not individual segment the crux
of the problem is that loss of a single segment can be interpreted
as loss of all. TCP only sees the last return code for the last
segment of the GSO frame (in <> brackets in the diagram above).
Of course for the problem to occur we need a setup or a device
without a Qdisc. Otherwise Qdisc layer disconnects the protocol
layer from the device errors completely.
We have multiple ways to fix this.
1) make veth not return an error when it lost a packet.
While this is what I think we did in the past, the issue keeps
reappearing and it's annoying to debug. The game of whack
a mole is not great.
2) fix the damn return codes
We only talk about NETDEV_TX_OK and NETDEV_TX_BUSY in the
documentation, so maybe we should make the return code from
ndo_start_xmit() a boolean. I like that the most, but perhaps
some ancient, not-really-networking protocol would suffer.
3) make TCP ignore the errors
It is not entirely clear to me what benefit TCP gets from
interpreting the result of ip_queue_xmit()? Specifically once
the connection is established and we're pushing data - packet
loss is just packet loss?
4) this fix
Ignore the rc in the Qdisc-less+GSO case, since it's unreliable.
We already always return OK in the TCQ_F_CAN_BYPASS case.
In the Qdisc-less case let's be a bit more conservative and only
mask the GSO errors. This path is taken by non-IP-"networks"
like CAN, MCTP etc, so we could regress some ancient thing.
This is the simplest, but also maybe the hackiest fix?
Similar fix has been proposed by Eric in the past but never committed
because original reporter was working with an OOT driver and wasn't
providing feedback (see Link).
Link: https://lore.kernel.org/CANn89iJcLepEin7EtBETrZ36bjoD9LrR=k4cfwWh046GB+4f9A@mail.gmail.com
Fixes: 1f59533f9c ("qdisc: validate frames going through the direct_xmit path")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260223235100.108939-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Update the vsock child_ns_mode documentation to include the new
write-once semantics of setting child_ns_mode. The semantics are
implemented in a preceding patch in this series.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260223-vsock-ns-write-once-v3-3-c0cde6959923@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Two administrator processes may race when setting child_ns_mode as one
process sets child_ns_mode to "local" and then creates a namespace, but
another process changes child_ns_mode to "global" between the write and
the namespace creation. The first process ends up with a namespace in
"global" mode instead of "local". While this can be detected after the
fact by reading ns_mode and retrying, it is fragile and error-prone.
Make child_ns_mode write-once so that a namespace manager can set it
once and be sure it won't change. Writing a different value after the
first write returns -EBUSY. This applies to all namespaces, including
init_net, where an init process can write "local" to lock all future
namespaces into local mode.
Fixes: eafb64f40c ("vsock: add netns to vsock core")
Suggested-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Co-developed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20260223-vsock-ns-write-once-v3-2-c0cde6959923@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The child_ns_mode sysctl parameter becomes write-once in a future patch
in this series, which breaks existing tests. This patch updates the
tests to respect this new policy. No additional tests are added.
Add "global-parent" and "local-parent" namespaces as intermediaries to
spawn namespaces in the given modes. This avoids the need to change
"child_ns_mode" in the init_ns. nsenter must be used because ip netns
unshares the mount namespace so nested "ip netns add" breaks exec calls
from the init ns. Adds nsenter to the deps check.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Link: https://patch.msgid.link/20260223-vsock-ns-write-once-v3-1-c0cde6959923@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Guillaume reported crashes via corrupted RCU callback function pointers
during KUnit testing. The crash was traced back to the pidfs rhashtable
conversion which replaced the 24-byte rb_node with an 8-byte rhash_head
in struct pid, shrinking it from 160 to 144 bytes.
struct kthread (without CONFIG_BLK_CGROUP) is also 144 bytes. With
CONFIG_SLAB_MERGE_DEFAULT and SLAB_HWCACHE_ALIGN both round up to
192 bytes and share the same slab cache. struct pid.rcu.func and
struct kthread.affinity_node both sit at offset 0x78.
When a kthread exits via make_task_dead() it bypasses kthread_exit() and
misses the affinity_node cleanup. free_kthread_struct() frees the memory
while the node is still linked into the global kthread_affinity_list. A
subsequent list_del() by another kthread writes through dangling list
pointers into the freed and reused memory, corrupting the pid's
rcu.func pointer.
Instead of patching free_kthread_struct() to handle the missed cleanup,
consolidate all kthread exit paths. Turn kthread_exit() into a macro
that calls do_exit() and add kthread_do_exit() which is called from
do_exit() for any task with PF_KTHREAD set. This guarantees that
kthread-specific cleanup always happens regardless of the exit path -
make_task_dead(), direct do_exit(), or kthread_exit().
Replace __to_kthread() with a new tsk_is_kthread() accessor in the
public header. Export do_exit() since module code using the
kthread_exit() macro now needs it directly.
Reported-by: Guillaume Tucker <gtucker@gtucker.io>
Tested-by: Guillaume Tucker <gtucker@gtucker.io>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: David Gow <davidgow@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/20260224-mittlerweile-besessen-2738831ae7f6@brauner
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Fixes: 4d13f4304f ("kthread: Implement preferred affinity")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
iomap's directio implementation has two magic errno codes that it uses
to signal callers -- ENOTBLK tells the filesystem that it should retry
a write with the pagecache; and EAGAIN tells the caller that pagecache
flushing or invalidation failed and that it should try again.
Neither of these indicate data loss, so let's not report them.
Fixes: a9d573ee88 ("iomap: report file I/O errors to the VFS")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Link: https://patch.msgid.link/20260224154637.GD2390381@frogsfrogsfrogs
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The entry of the validators table for UAC3 AC header descriptor is
defined with the wrong protocol version UAC_VERSION_2, while it should
have been UAC_VERSION_3. This results in the validator never matching
for actual UAC3 devices (protocol == UAC_VERSION_3), causing their
header descriptors to bypass validation entirely. A malicious USB
device presenting a truncated UAC3 header could exploit this to cause
out-of-bounds reads when the driver later accesses unvalidated
descriptor fields.
The bug was introduced in the same commit as the recently fixed UAC3
feature unit sub-type typo, and appears to be from the same copy-paste
error when the UAC3 section was created from the UAC2 section.
Fixes: 57f8770620 ("ALSA: usb-audio: More validations of descriptor units")
Cc: <stable@vger.kernel.org>
Signed-off-by: Jun Seo <jun.seo.93@proton.me>
Link: https://patch.msgid.link/20260226010820.36529-1-jun.seo.93@proton.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Tariq Toukan says:
====================
mlx5 misc fixes 2026-02-24
This patchset provides misc bug fixes from the team to the mlx5
core and Eth drivers.
====================
Link: https://patch.msgid.link/20260224114652.1787431-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a "scheduling while atomic" bug in mlx5e_ipsec_init_macs() by
replacing mlx5_query_mac_address() with ether_addr_copy() to get the
local MAC address directly from netdev->dev_addr.
The issue occurs because mlx5_query_mac_address() queries the hardware
which involves mlx5_cmd_exec() that can sleep, but it is called from
the mlx5e_ipsec_handle_event workqueue which runs in atomic context.
The MAC address is already available in netdev->dev_addr, so no need
to query hardware. This avoids the sleeping call and resolves the bug.
Call trace:
BUG: scheduling while atomic: kworker/u112:2/69344/0x00000200
__schedule+0x7ab/0xa20
schedule+0x1c/0xb0
schedule_timeout+0x6e/0xf0
__wait_for_common+0x91/0x1b0
cmd_exec+0xa85/0xff0 [mlx5_core]
mlx5_cmd_exec+0x1f/0x50 [mlx5_core]
mlx5_query_nic_vport_mac_address+0x7b/0xd0 [mlx5_core]
mlx5_query_mac_address+0x19/0x30 [mlx5_core]
mlx5e_ipsec_init_macs+0xc1/0x720 [mlx5_core]
mlx5e_ipsec_build_accel_xfrm_attrs+0x422/0x670 [mlx5_core]
mlx5e_ipsec_handle_event+0x2b9/0x460 [mlx5_core]
process_one_work+0x178/0x2e0
worker_thread+0x2ea/0x430
Fixes: cee137a634 ("net/mlx5e: Handle ESN update events")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260224114652.1787431-6-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cited commit miss to add locking in the error path of
mlx5_sriov_enable(). When pci_enable_sriov() fails,
mlx5_device_disable_sriov() is called to clean up. This cleanup function
now expects to be called with the devlink instance lock held.
Add the missing devl_lock(devlink) and devl_unlock(devlink)
Fixes: 84a433a40d ("net/mlx5: Lock mlx5 devlink reload callbacks")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260224114652.1787431-5-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cited commit introduced MLX5_PRIV_FLAGS_SWITCH_LEGACY to identify
when a transition to legacy mode is requested via devlink. However, the
logic failed to clear this flag if the mode was subsequently changed
back to MLX5_ESWITCH_OFFLOADS (switchdev). Consequently, if a user
toggled from legacy to switchdev, the flag remained set, leaving the
driver with wrong state indicating
Fix this by explicitly clearing the MLX5_PRIV_FLAGS_SWITCH_LEGACY bit
when the requested mode is MLX5_ESWITCH_OFFLOADS.
Fixes: 2a4f56fbcc ("net/mlx5e: Keep netdev when leave switchdev for devlink set legacy only")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260224114652.1787431-4-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5_lag_disable_change() unconditionally called mlx5_disable_lag() when
LAG was active, which is incorrect for MLX5_LAG_MODE_MPESW.
Hnece, call mlx5_disable_mpesw() when running in MPESW mode.
Fixes: a32327a3a0 ("net/mlx5: Lag, Control MultiPort E-Switch single FDB mode")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260224114652.1787431-3-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel says:
====================
team: Fix reference count leak when changing port netns
Patch #1 fixes a reference count leak that was reported by syzkaller.
The leak happens when a net device that is member in a team is changing
netns. The fix is to align the team driver with the bond driver and have
it suppress NETDEV_CHANGEMTU events for a net device that is being
unregistered.
Without this change, the NETDEV_CHANGEMTU event causes inetdev_event()
to recreate an inet device for this net device in its original netns,
after it was previously destroyed upon NETDEV_UNREGISTER. Later on, when
inetdev_event() receives a NETDEV_REGISTER event for this net device in
the new nents, it simply leaks the reference:
case NETDEV_REGISTER:
pr_debug("%s: bug\n", __func__);
RCU_INIT_POINTER(dev->ip_ptr, NULL);
break;
addrconf_notify() handles this differently and reuses the existing inet6
device if one exists when a NETDEV_REGISTER event is received. This
creates a different problem where it is possible for a net device to
reference an inet6 device that was created in a previous netns.
A more generic fix that we can try in net-next is to revert the changes
in the bond and team drivers and instead have IPv4 and IPv6 destroy and
recreate an inet device if one already exists upon NETDEV_REGISTER.
Patch #2 adds a selftest that passes with the fix and hangs without it.
====================
Link: https://patch.msgid.link/20260224125709.317574-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test for the issue that was fixed in "team: avoid NETDEV_CHANGEMTU
event when unregistering slave".
The test hangs due to a reference count leak without the fix:
# make -C tools/testing/selftests TARGETS="drivers/net/team" TEST_PROGS=refleak.sh TEST_GEN_PROGS="" run_tests
[...]
TAP version 13
1..1
# timeout set to 45
# selftests: drivers/net/team: refleak.sh
[ 50.681299][ T496] unregister_netdevice: waiting for dummy1 to become free. Usage count = 3
[ 71.185325][ T496] unregister_netdevice: waiting for dummy1 to become free. Usage count = 3
And passes with the fix:
# make -C tools/testing/selftests TARGETS="drivers/net/team" TEST_PROGS=refleak.sh TEST_GEN_PROGS="" run_tests
[...]
TAP version 13
1..1
# timeout set to 45
# selftests: drivers/net/team: refleak.sh
ok 1 selftests: drivers/net/team: refleak.sh
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260224125709.317574-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot is reporting
unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 3
ref_tracker: netdev@ffff88807dcf8618 has 1/2 users at
__netdev_tracker_alloc include/linux/netdevice.h:4400 [inline]
netdev_hold include/linux/netdevice.h:4429 [inline]
inetdev_init+0x201/0x4e0 net/ipv4/devinet.c:286
inetdev_event+0x251/0x1610 net/ipv4/devinet.c:1600
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
call_netdevice_notifiers_mtu net/core/dev.c:2318 [inline]
netif_set_mtu_ext+0x5aa/0x800 net/core/dev.c:9886
netif_set_mtu+0xd7/0x1b0 net/core/dev.c:9907
dev_set_mtu+0x126/0x260 net/core/dev_api.c:248
team_port_del+0xb07/0xcb0 drivers/net/team/team_core.c:1333
team_del_slave drivers/net/team/team_core.c:1936 [inline]
team_device_event+0x207/0x5b0 drivers/net/team/team_core.c:2929
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
call_netdevice_notifiers_extack net/core/dev.c:2281 [inline]
call_netdevice_notifiers net/core/dev.c:2295 [inline]
__dev_change_net_namespace+0xcb7/0x2050 net/core/dev.c:12592
do_setlink+0x2ce/0x4590 net/core/rtnetlink.c:3060
rtnl_changelink net/core/rtnetlink.c:3776 [inline]
__rtnl_newlink net/core/rtnetlink.c:3935 [inline]
rtnl_newlink+0x15a9/0x1be0 net/core/rtnetlink.c:4072
rtnetlink_rcv_msg+0x7d5/0xbe0 net/core/rtnetlink.c:6958
netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894
problem. Ido Schimmel found steps to reproduce
ip link add name team1 type team
ip link add name dummy1 mtu 1499 master team1 type dummy
ip netns add ns1
ip link set dev dummy1 netns ns1
ip -n ns1 link del dev dummy1
and also found that the same issue was fixed in the bond driver in
commit f51048c3e0 ("bonding: avoid NETDEV_CHANGEMTU event when
unregistering slave").
Let's do similar thing for the team driver, with commit ad7c7b2172 ("net:
hold netdev instance lock during sysfs operations") and commit 303a8487a6
("net: s/__dev_set_mtu/__netif_set_mtu/") also applied.
Reported-by: syzbot+881d65229ca4f9ae8c84@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=881d65229ca4f9ae8c84
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Fixes: 3d249d4ca7 ("net: introduce ethernet teaming device")
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20260224125709.317574-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While testing corner cases in the driver, a use-after-free crash
was found on the service rescan PCI path.
When mana_serv_reset() calls mana_gd_suspend(), mana_gd_cleanup()
destroys gc->service_wq. If the subsequent mana_gd_resume() fails
with -ETIMEDOUT or -EPROTO, the code falls through to
mana_serv_rescan() which triggers pci_stop_and_remove_bus_device().
This invokes the PCI .remove callback (mana_gd_remove), which calls
mana_gd_cleanup() a second time, attempting to destroy the already-
freed workqueue. Fix this by NULL-checking gc->service_wq in
mana_gd_cleanup() and setting it to NULL after destruction.
Call stack of issue for reference:
[Sat Feb 21 18:53:48 2026] Call Trace:
[Sat Feb 21 18:53:48 2026] <TASK>
[Sat Feb 21 18:53:48 2026] mana_gd_cleanup+0x33/0x70 [mana]
[Sat Feb 21 18:53:48 2026] mana_gd_remove+0x3a/0xc0 [mana]
[Sat Feb 21 18:53:48 2026] pci_device_remove+0x41/0xb0
[Sat Feb 21 18:53:48 2026] device_remove+0x46/0x70
[Sat Feb 21 18:53:48 2026] device_release_driver_internal+0x1e3/0x250
[Sat Feb 21 18:53:48 2026] device_release_driver+0x12/0x20
[Sat Feb 21 18:53:48 2026] pci_stop_bus_device+0x6a/0x90
[Sat Feb 21 18:53:48 2026] pci_stop_and_remove_bus_device+0x13/0x30
[Sat Feb 21 18:53:48 2026] mana_do_service+0x180/0x290 [mana]
[Sat Feb 21 18:53:48 2026] mana_serv_func+0x24/0x50 [mana]
[Sat Feb 21 18:53:48 2026] process_one_work+0x190/0x3d0
[Sat Feb 21 18:53:48 2026] worker_thread+0x16e/0x2e0
[Sat Feb 21 18:53:48 2026] kthread+0xf7/0x130
[Sat Feb 21 18:53:48 2026] ? __pfx_worker_thread+0x10/0x10
[Sat Feb 21 18:53:48 2026] ? __pfx_kthread+0x10/0x10
[Sat Feb 21 18:53:48 2026] ret_from_fork+0x269/0x350
[Sat Feb 21 18:53:48 2026] ? __pfx_kthread+0x10/0x10
[Sat Feb 21 18:53:48 2026] ret_from_fork_asm+0x1a/0x30
[Sat Feb 21 18:53:48 2026] </TASK>
Fixes: 505cc26bca ("net: mana: Add support for auxiliary device servicing events")
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/aZ2bzL64NagfyHpg@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace Vinod Koul with Mohd Ayaan Anwar as the maintainer of the
QUALCOMM ETHQOS ETHERNET DRIVER. Vinod confirmed he is no longer
active in this area and agreed to be removed.
Acked-by: Vinod Koul <vkoul@kernel.org>
Suggested-by: Russell King (Oracle) <linux@armlinux.org.uk>
Signed-off-by: Mohd Ayaan Anwar <mohd.anwar@oss.qualcomm.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20260224-qcom_ethqos_maintainer-v1-1-24e02701ea52@oss.qualcomm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The devm_add_action_or_reset() function already executes the cleanup
action on failure before returning an error, so the explicit goto error
and subsequent zl3073x_dev_dpll_fini() call causes double cleanup.
Fixes: ebb1031c51 ("dpll: zl3073x: Refactor DPLL initialization")
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260224-dpll-v2-1-d7786414a830@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
