After commit:
884961618e ("x86/entry/vdso32: Remove open-coded DWARF in sigreturn.S")
building arch/x86/entry/vdso/vdso32/sigreturn.S with LLVM 15 fails with:
<instantiation>:18:20: error: invalid register name
.cfi_offset eflags, 64
^
arch/x86/entry/vdso/vdso32/sigreturn.S:33:2: note: while in macro instantiation
STARTPROC_SIGNAL_FRAME 8
^
Support for eflags as an argument to .cfi_offset was added in the LLVM
16 development cycle:
67bd3c58c0 [1]
Only add this .cfi_offset directive if it is supported by the assembler
to clear up the error.
[ mingo: Tidied up the changelog and the comment a bit ]
Fixes: 884961618e ("x86/entry/vdso32: Remove open-coded DWARF in sigreturn.S")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Link: https://patch.msgid.link/20260123-x86-vdso32-wa-llvm-15-cfi-offset-eflags-v1-1-0f412e3516a4@kernel.org
- Ensure early return semantics are preserved for pKVM fault handlers
- Fix case where the kernel runs with the guest's PAN value when
CONFIG_ARM64_PAN is not set
- Make stage-1 walks to set the access flag respect the access
permission of the underlying stage-2, when enabled
- Propagate computed FGT values to the pKVM view of the vCPU at
vcpu_load()
- Correctly program PXN and UXN privilege bits for hVHE's stage-1 page
tables
- Check that the VM is actually using VGICv3 before accessing the GICv3
CPU interface
- Delete some unused code
-----BEGIN PGP SIGNATURE-----
iI0EABYKADUWIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCaWiyJBccb2xpdmVyLnVw
dG9uQGxpbnV4LmRldgAKCRCivnWIJHzdFqVhAQDM4Lbrq0F80X+YzvO7oxWioOy4
JiTATSii9Lit8KY6fgEAvLD4qaggLdF3+WY+V37YmTj3UDgI31ClBr+xSvSengA=
=XaL0
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.19-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.19
- Ensure early return semantics are preserved for pKVM fault handlers
- Fix case where the kernel runs with the guest's PAN value when
CONFIG_ARM64_PAN is not set
- Make stage-1 walks to set the access flag respect the access
permission of the underlying stage-2, when enabled
- Propagate computed FGT values to the pKVM view of the vCPU at
vcpu_load()
- Correctly program PXN and UXN privilege bits for hVHE's stage-1 page
tables
- Check that the VM is actually using VGICv3 before accessing the GICv3
CPU interface
- Delete some unused code
Move the PHY initialization from PRE_CHANGE to POST_CHANGE in the
ufs_versal2_hce_enable_notify() callback. This ensures that the PHY is
initialized after the host controller enable sequence is complete, rather
than before it starts.
The PHY initialization requires the UFS host controller to be in a stable
enabled state to properly configure the MPHY registers. Moving this to
POST_CHANGE aligns with the expected initialization order and prevents
potential timing issues during controller startup.
Fixes: 769b8b2ffd ("scsi: ufs: amd-versal2: Add UFS support for AMD Versal Gen 2 SoC")
Signed-off-by: Ajay Neeli <ajay.neeli@amd.com>
Link: https://patch.msgid.link/20251224053950.54213-1-ajay.neeli@amd.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The code in sbp_make_tpg() limits "tpgt" to UINT_MAX but the data type of
"tpg->tport_tpgt" is u16. This causes a type truncation issue.
When a user creates a TPG via configfs mkdir, for example:
mkdir /sys/kernel/config/target/sbp/<wwn>/tpgt_70000
The value 70000 passes the "tpgt > UINT_MAX" check since 70000 is far less
than 4294967295. However, when assigned to the u16 field tpg->tport_tpgt,
the value is silently truncated to 4464 (70000 & 0xFFFF). This causes the
value the user specified to differ from what is actually stored, leading to
confusion and potential unexpected behavior.
Fix this by changing the type of "tpgt" to u16 and using kstrtou16() which
will properly reject values outside the u16 range.
Fixes: a511ce3397 ("sbp-target: Initial merge of firewire/ieee-1394 target mode support")
Signed-off-by: Kery Qi <qikeyu2017@gmail.com>
Link: https://patch.msgid.link/20260121114515.1829-2-qikeyu2017@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Earlier in the function, the ha->flt buffer is allocated with size
sizeof(struct qla_flt_header) + FLT_REGIONS_SIZE but freed in the error
path with size SFP_DEV_SIZE.
Fixes: 84318a9f01 ("scsi: qla2xxx: edif: Add send, receive, and accept for auth_els")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Link: https://patch.msgid.link/20260112134326.55466-2-fourier.thomas@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Marco Crivellari <marco.crivellari@suse.com> says:
Hi,
This series continues the effort to refactor the Workqueue API.
No behavior changes are introduced by this series.
=== Recent changes to the WQ API ===
The following, address the recent changes in the Workqueue API:
- commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
- commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The old workqueues will be removed in a future release cycle and
unbound will become the implicit default.
=== Introduced Changes by this series ===
1) [P 1-2-3] add WQ_PERCPU to alloc_workqueue() users
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
WQ_UNBOUND will be removed in future.
For more information:
https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Link: https://patch.msgid.link/20260113145711.242316-1-marco.crivellari@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue() flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The refactoring is going to alter the default behavior of
alloc_workqueue() to be unbound by default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU. For more details see the Link tag below.
In order to keep alloc_workqueue() behavior identical, explicitly
request WQ_PERCPU.
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20260113145711.242316-4-marco.crivellari@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue() flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The refactoring is going to alter the default behavior of
alloc_workqueue() to be unbound by default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU. For more details see the Link tag below.
In order to keep alloc_workqueue() behavior identical, explicitly request
WQ_PERCPU.
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20260113145711.242316-3-marco.crivellari@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue() flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
The refactoring is going to alter the default behavior of
alloc_workqueue() to be unbound by default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU. For more details see the Link tag below.
In order to keep alloc_workqueue() behavior identical, explicitly
request WQ_PERCPU.
Link: https://lore.kernel.org/all/20250221112003.1dSuoGyc@linutronix.de/
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20260113145711.242316-2-marco.crivellari@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Capture and retain firmware fault codes and extended fault information
whenever the controller enters a fault state.
Maintain a persistent firmware fault counter, expose it via sysfs, and
generate uevents to aid userspace diagnostics and failure analysis.
Co-developed-by: Salomon Dushimirimana <salomondush@google.com>
Signed-off-by: Salomon Dushimirimana <salomondush@google.com>
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260116060719.32937-7-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Firmware populates the negotiated SAS link rate in DevicePage0 during
device discovery. Update mpi3mr to cache this value while initializing
the target device.
When available, the cached link rate is used instead of issuing
additional SAS PHY or expander PHY page reads. If the DevicePage0 value
is missing or invalid, the driver falls back to the existing PHY-based
mechanism.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260116060719.32937-5-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update reset handling to invoke diag-save only for diag-fault resets.
Skip issuing a diagnostic reset if the IOC is already in FAULT state,
preventing repeated fault handling and improving reset stability.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260116060719.32937-4-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Log data events can be processed from BH and threaded contexts. Rename
the save helper to document its intended usage and improve readability
of the event handling flow.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260116060719.32937-3-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a module parameter to enable or disable threaded IRQ polling in the
driver. The default behavior remains unchanged with polling enabled.
When disabled, completion processing is kept entirely in the hard IRQ
context, avoiding the threaded polling path.
Signed-off-by: Ranjan Kumar <ranjan.kumar@broadcom.com>
Link: https://patch.msgid.link/20260116060719.32937-2-ranjan.kumar@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Ram Kumar Dwivedi <ram.dwivedi@oss.qualcomm.com> says:
On Qualcomm automotive SoC SA8255P, platform resource like clocks,
interconnect, resets, regulators and PHY are configured remotely by
firmware.
Logical power domain is used to abstract these resources in firmware
and SCMI power protocol is used to request resource operations by
using runtime PM framework APIs such as pm_runtime_get/put_sync to
invoke power_on/_off calls from kernel respectively.
Link: https://patch.msgid.link/20260113080046.284089-1-ram.dwivedi@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add a compatible string for SA8255p platforms where resources such as
PHY, clocks, regulators, and resets are managed by firmware through an
SCMI server. Use the SCMI power protocol to abstract these resources and
invoke power operations via runtime PM APIs (pm_runtime_get/put_sync).
Introduce vendor operations (vops) for SA8255p targets to enable SCMI-
based resource control. In this model, capabilities like clock scaling
and gating are not yet supported; these will be added incrementally.
Co-developed-by: Anjana Hari <anjana.hari@oss.qualcomm.com>
Signed-off-by: Anjana Hari <anjana.hari@oss.qualcomm.com>
Co-developed-by: Shazad Hussain <shazad.hussain@oss.qualcomm.com>
Signed-off-by: Shazad Hussain <shazad.hussain@oss.qualcomm.com>
Signed-off-by: Ram Kumar Dwivedi <ram.dwivedi@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260113080046.284089-5-ram.dwivedi@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Some UFS platforms only support a limited subset of power levels.
Currently, the sysfs interface allows users to set any PM level without
validating the minimum supported value. If an unsupported level is
selected, suspend may fail.
Introduce an pm_lvl_min field in the ufs_hba structure and use it to
clamp the PM level requested via sysfs so that only supported levels are
accepted. Platforms that require a minimum PM level can set this field
during probe.
Signed-off-by: Ram Kumar Dwivedi <ram.dwivedi@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260113080046.284089-4-ram.dwivedi@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Document the device tree bindings for UFS host controller on Qualcomm
SA8255P platform which integrates firmware-managed resources.
The platform firmware implements the SCMI server and manages resources
such as the PHY, clocks, regulators and resets via the SCMI power
protocol. As a result, the OS-visible DT only describes the controller’s
MMIO, interrupt, IOMMU and power-domain interfaces.
The generic "qcom,ufshc" and "jedec,ufs-2.0" compatible strings are
removed from the binding, since this firmware managed design won't be
compatible with the drivers doing full resource management.
Co-developed-by: Anjana Hari <anjana.hari@oss.qualcomm.com>
Signed-off-by: Anjana Hari <anjana.hari@oss.qualcomm.com>
Signed-off-by: Ram Kumar Dwivedi <ram.dwivedi@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20260113080046.284089-3-ram.dwivedi@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update the file pattern for UFS Qualcomm devicetree bindings to match
all files under 'Documentation/devicetree/bindings/ufs/qcom*' instead of
only 'qcom,ufs.yaml'. This ensures maintainers are correctly notified
for any related binding changes.
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Ram Kumar Dwivedi <ram.dwivedi@oss.qualcomm.com>
Link: https://patch.msgid.link/20260113080046.284089-2-ram.dwivedi@oss.qualcomm.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Bart Van Assche <bvanassche@acm.org> says:
Hi Martin,
Most but not all .queuecommand() implementations return a SCSI_MLQUEUE_*
constant. This affects code readability: in order to understand what happens
if a .queuecommand() function returns a value that is not a SCSI_MLQUEUE_*
constant, one has to read the scsi_dispatch_cmd() implementation and check
how other values are handled. Hence this patch series that changes the
return type of the .queuecommand() callback and also of the implementations of
this callback.
Please consider this patch series for the next merge window.
Thanks,
Bart.
Link: https://patch.msgid.link/20260115210357.2501991-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In clang version 21.1 and later the -Wimplicit-enum-enum-cast warning
option has been introduced. This warning is enabled by default and can
be used to catch .queuecommand() implementations that return another
value than 0 or one of the SCSI_MLQUEUE_* constants. Hence this patch
that changes the return type of the .queuecommand() implementations from
'int' into 'enum scsi_qc_status'. No functionality has been changed.
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260115210357.2501991-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Prevent that a later patch that modifies the qla2xxx_mqueuecommand()
declaration triggers the following checkpatch warning: "externs should
be avoided in .c files".
Cc: Nilesh Javali <njavali@marvell.com>
Cc: GR-QLogic-Storage-Upstream@marvell.com
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20260115210357.2501991-5-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
.queuecommand() implementations are expected to return a SCSI_MLQUEUE_*
value. Return SCSI_MLQUEUE_HOST_BUSY from megaraid_queue_command_lck()
instead of 1. This patch doesn't change any functionality since
scsi_dispatch_cmd() converts all return values other than SCSI_MLQUEUE_*
into SCSI_MLQUEUE_HOST_BUSY.
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Cc: Chandrakanth patil <chandrakanth.patil@broadcom.com>
Cc: megaraidlinux.pdl@broadcom.com
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260115210357.2501991-4-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
.queuecommand() implementations are expected to return a SCSI_MLQUEUE_*
value. Return SCSI_MLQUEUE_HOST_BUSY from megaraid_queue_lck() instead
of 1. This patch doesn't change any functionality since
scsi_dispatch_cmd() converts all return values other than SCSI_MLQUEUE_*
into SCSI_MLQUEUE_HOST_BUSY.
Cc: Kashyap Desai <kashyap.desai@broadcom.com>
Cc: Sumit Saxena <sumit.saxena@broadcom.com>
Cc: Shivasharan S <shivasharan.srikanteshwara@broadcom.com>
Cc: Chandrakanth patil <chandrakanth.patil@broadcom.com>
Cc: megaraidlinux.pdl@broadcom.com
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260115210357.2501991-3-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
.queuecommand() implementations are expected to return a SCSI_MLQUEUE_*
value. Return SCSI_MLQUEUE_HOST_BUSY from aha152x_internal_queue()
instead of 0x2003. This patch doesn't change any functionality since
scsi_dispatch_cmd() converts all return values other than SCSI_MLQUEUE_*
into SCSI_MLQUEUE_HOST_BUSY.
Cc: Juergen E. Fischer <fischer@norbit.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Link: https://patch.msgid.link/20260115210357.2501991-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On Turing and GA100 (i.e. the versions that use Libos v2), GSP-RM insists
that the 'size' parameter of the LibosMemoryRegionInitArgument struct be
aligned to 4KB. The logging buffers are already aligned to that size, so
only the GSP_ARGUMENTS_CACHED struct needs to be adjusted. Make that
adjustment by adding padding to the end of the struct.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260122222848.2555890-12-ttabi@nvidia.com
[acourbot@nvidia.com: GspArgumentsAligned -> GspArgumentsPadded]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
The FRTS firmware in Turing and GA100 VBIOS has an older header
format (v2 instead of v3). To support both v2 and v3 at runtime,
add the FalconUCodeDescV2 struct, and update code that references
the FalconUCodeDescV3 directly with a FalconUCodeDesc enum that
encapsulates both.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260122222848.2555890-11-ttabi@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Some GPUs do not support using DMA to transfer code/data from system
memory to Falcon memory, and instead must use programmed I/O (PIO).
Add a function to the Falcon HAL to indicate whether a given GPU's
Falcons support DMA for this purpose.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260122222848.2555890-10-ttabi@nvidia.com
[acourbot@nvidia.com: add short code to call into the HAL.]
[acourbot@nvidia.com: make `dma_load` private as per feedback.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
The hw clock gating register sequence consists of register value pairs
that are written to the GPU during initialisation.
The a690 hwcg sequence has two GMU registers in it that used to amount
to random writes in the GPU mapping, but since commit 188db3d7fe
("drm/msm/a6xx: Rebase GMU register offsets") they trigger a fault as
the updated offsets now lie outside the mapping. This in turn breaks
boot of machines like the Lenovo ThinkPad X13s.
Note that the updates of these GMU registers is already taken care of
properly since commit 40c297eb24 ("drm/msm/a6xx: Set GMU CGC
properties on a6xx too"), but for some reason these two entries were
left in the table.
Fixes: 5e7665b5e4 ("drm/msm/adreno: Add Adreno A690 support")
Cc: stable@vger.kernel.org # 6.5
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Fixes: 188db3d7fe ("drm/msm/a6xx: Rebase GMU register offsets")
Patchwork: https://patchwork.freedesktop.org/patch/695778/
Message-ID: <20251221164552.19990-1-johan@kernel.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
(cherry picked from commit dcbd2f8280)
Currently, `dev_*` only works on the core `Device`, but not on any other
bus or class device objects. This causes a pattern of
`dev_info!(pdev.as_ref())` which is not ideal.
This adds support of using these devices directly with `dev_*` macros, by
adding `AsRef` call inside the macro. To make sure we can still use just
`kernel::device::Device`, as `AsRef` implementation is added for it; this
is typical for types that is designed to use with `AsRef` anyway, for
example, `str` implements `AsRef<str>` and `Path` implements `AsRef<Path>`.
Signed-off-by: Gary Guo <gary@garyguo.net>
Link: https://patch.msgid.link/20260123175854.176735-1-gary@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
struct configfs_item_operations callbacks are defined like the following:
int (*allow_link)(struct config_item *src, struct config_item *target);
void (*drop_link)(struct config_item *src, struct config_item *target);
While pci_primary_epc_epf_link() and pci_secondary_epc_epf_link() specify
the parameters in the correct order, pci_primary_epc_epf_unlink() and
pci_secondary_epc_epf_unlink() specify the parameters in the wrong order,
leading to the below kernel crash when using the unlink command in
configfs:
Unable to handle kernel paging request at virtual address 0000000300000857
Mem abort info:
...
pc : string+0x54/0x14c
lr : vsnprintf+0x280/0x6e8
...
string+0x54/0x14c
vsnprintf+0x280/0x6e8
vprintk_default+0x38/0x4c
vprintk+0xc4/0xe0
pci_epf_unbind+0xdc/0x108
configfs_unlink+0xe0/0x208+0x44/0x74
vfs_unlink+0x120/0x29c
__arm64_sys_unlinkat+0x3c/0x90
invoke_syscall+0x48/0x134
do_el0_svc+0x1c/0x30prop.0+0xd0/0xf0
Fixes: e85a2d7837 ("PCI: endpoint: Add support in configfs to associate two EPCs with EPF")
Signed-off-by: Manikanta Maddireddy <mmaddireddy@nvidia.com>
[mani: cced stable, changed commit message as per https://lore.kernel.org/linux-pci/aV9joi3jF1R6ca02@ryzen]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260108062747.1870669-1-mmaddireddy@nvidia.com
Add a method for the NV_PFALCON_FALCON_ENGINE register that reset the
Falcon, and update the reset_eng() HAL functions to use it.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260122222848.2555890-9-ttabi@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Add the basic HAL for recognizing Turing GPUs. This isn't enough
to support booting GSP-RM on Turing, but it's a start.
Note that GA100, which boots using the same method as Turing, is not
supported yet.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260122222848.2555890-8-ttabi@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
A few Falcon methods are actually GPU-specific, so move them
into the HAL.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260122222848.2555890-7-ttabi@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
The with_falcon_mem() method initializes the 'imem' and 'sec' fields of
the NV_PFALCON_FALCON_DMATRFCMD register based on the value of
the FalconMem type.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260122222848.2555890-6-ttabi@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Turing and GA100 share the same GSP-RM firmware binary, but the
signature ELF section is labeled either ".fwsignature_tu10x" or
".fwsignature_tu11x".
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260122222848.2555890-5-ttabi@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
The Turing/GA100 version of Booter is slightly different from the
GA102+ version. The headers are the same, but different fields of
the headers are used to identify the IMEM section. In addition,
there is an NMEM section on Turing/GA100.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260122222848.2555890-4-ttabi@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
The GSP booter firmware in Turing and GA100 includes a third memory
section called ImemNonSecure, which is non-secure IMEM. This section
must be loaded separately from DMEM and secure IMEM, but only if it
actually exists.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260122222848.2555890-3-ttabi@nvidia.com
[acourbot@nvidia.com: add `debug_assert`.]
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Rename FalconMem::Imem to ImemSecure to indicate that it references
Secure Instruction Memory. This change has no functional impact.
On Falcon cores, pages in instruction memory can be tagged as Secure
or Non-Secure. For GA102 and later, only Secure is used, which is why
FalconMem::Imem seems appropriate. However, Turing firmware images
can also contain non-secure sections, and so FalconMem needs to support
that. By renaming Imem to ImemSec now, future patches for Turing support
will be simpler.
Nouveau uses the term "IMEM" to refer both to the Instruction Memory
block on Falcon cores as well as to the images of secure firmware
uploaded to part of IMEM. OpenRM uses the terms "ImemSec" and "ImemNs"
instead, and uses "IMEM" just to refer to the physical memory device.
Renaming these terms allows us to align with OpenRM, avoid confusion
between IMEM and ImemSec, and makes future patches simpler.
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patch.msgid.link/20260122222848.2555890-2-ttabi@nvidia.com
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
- Reduce possible complications when cross-compiling by increasing use
of ${NM} in check-function-names.sh
- Fix static linking of nconf
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Arkadiusz Kozdra <floss@arusekk.pl>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Nicolas Schier <nsc@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ExIb
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull kbuild fixes from Nicolas Schier:
- Reduce possible complications when cross-compiling by increasing use
of ${NM} in check-function-names.sh
- Fix static linking of nconf
* tag 'kbuild-fixes-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kconfig: fix static linking of nconf
kbuild: prefer ${NM} in check-function-names.sh
When I enabled Rust compilation, I wanted to clean up its output, so I
used make mrproper. However, I was still able to find that
libpin_init_internal.so in the rust directory was not deleted, while
all other corresponding outputs were cleared.
Thus add it to the `MRPROPER_FILES` list.
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Signed-off-by: Chen Miao <chenmiao@openatom.club>
Fixes: d7659acca7 ("rust: add pin-init crate build infrastructure")
Cc: stable@vger.kernel.org
Acked-by: Nicolas Schier <nsc@kernel.org>
Acked-by: Benno Lossin <lossin@kernel.org>
Link: https://patch.msgid.link/71ff222b8731e63e06059c5d8566434e508baf2b.1761876365.git.chenmiao@openatom.club
[ Fixed tags and Git author as discussed. Reworded slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
- Add $(DISABLE_KSTACK_ERASE) to vdso compile flags to fix compile errors
with old gcc versions
- Fix path to s390 chacha implementation in vdso selftests, after vdso64
has been renamed to vdso
- Fix off-by-one bug in APQN limit calculation
- Discard .modinfo section from decompressor image to fix SecureBoot
-----BEGIN PGP SIGNATURE-----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=ugtG
-----END PGP SIGNATURE-----
Merge tag 's390-6.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Add $(DISABLE_KSTACK_ERASE) to vdso compile flags to fix compile
errors with old gcc versions
- Fix path to s390 chacha implementation in vdso selftests, after
vdso64 has been renamed to vdso
- Fix off-by-one bug in APQN limit calculation
- Discard .modinfo section from decompressor image to fix SecureBoot
* tag 's390-6.19-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/boot/vmlinux.lds.S: Ensure bzImage ends with SecureBoot trailer
s390/ap: Fix wrong APQN fill calculation
selftests: vDSO: getrandom: Fix path to s390 chacha implementation
s390/vdso: Disable kstack erase
