imx8m_soc_prepare() directly returns the result of clk_prepare_enable(),
which skips proper cleanup if the clock enable fails. Check the return
value of clk_prepare_enable() and release resources if failure.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202601111406.ZVV3YaiU-lkp@intel.com/
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Wire up the TPS65185 regulator needed for the display.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Kobo Aura (N514) includes a TPS65185 PMIC for the epaper display.
Add description for this pmic and its vin power-supply.
Signed-off-by: Josua Mayer <josua.mayer@jm0.eu>
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Wire up the TPS65185 regulator needed for the display.
Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Breno Leitao says:
====================
net: convert drivers to .get_rx_ring_count (part 2)
Commit 84eaf4359c ("net: ethtool: add get_rx_ring_count callback to
optimize RX ring queries") added specific support for GRXRINGS callback,
simplifying .get_rxnfc.
Remove the handling of GRXRINGS in .get_rxnfc() by moving it to the new
.get_rx_ring_count().
This simplifies the RX ring count retrieval and aligns the following
drivers with the new ethtool API for querying RX ring parameters.
* engleder/tsnep
* mediatek
* amazon/ena
* microchip/lan743x
* amd/xgbe
* chelsio/cxgb4
* wangxun/txgbe
* cadence/macb
All of these change were compile-tested only.
====================
Link: https://patch.msgid.link/20260115-grxring_big_v2-v1-0-b3e1b58bced5@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the newly introduced .get_rx_ring_count ethtool ops callback instead
of handling ETHTOOL_GRXRINGS directly in .get_rxnfc().
Since ETHTOOL_GRXRINGS was the only command handled by xgbe_get_rxnfc(),
remove the function entirely.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260115-grxring_big_v2-v1-6-b3e1b58bced5@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the newly introduced .get_rx_ring_count ethtool ops callback instead
of handling ETHTOOL_GRXRINGS directly in .get_rxnfc().
Since ETHTOOL_GRXRINGS was the only command handled by
lan743x_ethtool_get_rxnfc(), remove the function entirely.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260115-grxring_big_v2-v1-5-b3e1b58bced5@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the newly introduced .get_rx_ring_count ethtool ops callback instead
of handling ETHTOOL_GRXRINGS directly in .get_rxnfc().
Since ETHTOOL_GRXRINGS was the only useful command handled by
ena_get_rxnfc(), remove the function entirely.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Arthur Kiyanovski <akiyano@amazon.com>
Link: https://patch.msgid.link/20260115-grxring_big_v2-v1-4-b3e1b58bced5@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit 068648aab7.
NFC packets may have NUL-bytes. Checking for string length is not a correct
assumption here. As long as there is a check for the length copied from
copy_from_user, all should be fine.
The fix only prevented the syzbot reproducer from triggering the bug
because the packet is not enqueued anymore and the code that triggers the
bug is not exercised.
The fix even broke
testing/selftests/nci/nci_dev, making all tests there fail. After the
revert, 6 out of 8 tests pass.
Fixes: 068648aab7 ("nfc/nci: Add the inconsistency check between the input data length and count")
Cc: stable@vger.kernel.org
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Link: https://patch.msgid.link/20260113202458.449455-1-cascardo@igalia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yohei Kojima says:
====================
selftests: net: improve error handling in passive TFO test
This series improves error handling in the passive TFO test by (1)
fixing a broken behavior when the child processes failed (or timed out),
and (2) adding more error handlng code in the test program.
The first patch fixes the behavior that the test didn't report failure
even if the server or the client process exited with non-zero status.
The second patch adds error handling code in the test program to improve
reliability of the test.
====================
Link: https://patch.msgid.link/cover.1768312014.git.yk@y-koj.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Improve the passive TFO test to report failure if the server or the
client timed out or exited with non-zero status.
Before this commit, TFO test didn't fail even if exit(EXIT_FAILURE) is
added to the first line of the run_server() and run_client() functions.
Signed-off-by: Yohei Kojima <yk@y-koj.net>
Link: https://patch.msgid.link/214d399caec2e5de7738ced5736829915d507e4e.1768312014.git.yk@y-koj.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable Medium Quality Sound (MQS) output on the i.MX93 FRDM 11x11 board
by adding sound card description and enabling sai1 and mqs1 dts nodes,
together with necessary clocks and pinmux.
This supports audio playback via SAI1 DAI which is connected to the MQS1
block.
Co-developed-by: Tom Zheng <haidong.zheng@nxp.com>
Signed-off-by: Tom Zheng <haidong.zheng@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Tested-by: Francesco Valla <francesco@valla.it>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add nxp,ctrl-ids in scmi_misc node for wakeup notification.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable wdog3 to allow System manager reset Linux.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable UART5 for using Bluetooth.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable I2C bus[2,3,4,6,7] and the io-expanders connected to each I2C bus.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Set usdhc1_200mhz drive strength need to use DSE4, according to validation
team's suggestion,
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add idle-states node and refer it in A55 nodes to enable cpuidle.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add support for ifm i.MX8MN VHIP4 EvalBoard v1 and v2 reference design.
This system exists in two generations, v1 and v2, which share a lot of
commonality. The boards come with either single gigabit ethernet or an
KSZ8794 fast-ethernet switch, boot from eMMC, and offer CAN interfaces
via Microchip MCP25xx SPI CAN controllers, UART, and USB host. The GPU
is not available in the SoC populated on these devices.
Signed-off-by: Fedor Ross <fedor.ross@ifm.com>
Signed-off-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add SNVS LPGPR bindings to MX8M Nano, the LPGPR is used to store
boot counter.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Marek Vasut <marex@nabladev.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The default values are fine, and MICDET_ENA is handled by the driver on
its own anyway.
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is needed for brcmfmac to turn the card off in suspend
since 8c3170628a.
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
SparkLAN card has stability issues at 100MHz. It still appears to be
able to max out its throughput this way, so limit the frequency to
ensure stable operation.
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
It has been disabled because it was being used for system clock instead
of the discrete RTC. However, SNVS has some features that the discrete
RTC does not, such as being able to turn the device on. Solve that issue
with aliases instead and reenable SNVS RTC.
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
1Hz as used previously was way too long.
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
i2c-imx can perform bus recovery by temporarily switching I2C pins
into GPIO mode. To do so, it needs GPIO and pinctrl handles to be
provided in the device tree.
Suggested-by: Denis Sergeevich <galilley@gmail.com>
Signed-off-by: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This is another one of those XGSPON ONU sticks that's using the
X-ONU-SFPP internally, thus it also requires the potron quirk to avoid tx
faults. So, add an entry for it in sfp_quirks[].
Cc: stable@vger.kernel.org
Signed-off-by: Hamza Mahfooz <someguy@effective-light.com>
Link: https://patch.msgid.link/20260113232957.609642-1-someguy@effective-light.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In veth_get_ethtool_stats(), some statistics protected by
u64_stats_sync, are read and accumulated in ignorance of possible
u64_stats_fetch_retry() events. These statistics, peer_tq_xdp_xmit and
peer_tq_xdp_xmit_err, are already accumulated by veth_xdp_xmit(). Fix
this by reading them into a temporary buffer first.
Fixes: 5fe6e56776 ("veth: rely on peer veth_rq for ndo_xdp_xmit accounting")
Signed-off-by: David Yang <mmyangfl@gmail.com>
Link: https://patch.msgid.link/20260114122450.227982-1-mmyangfl@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Golle says:
====================
net: phy: realtek: simplify and reunify C22/C45 drivers
The RTL8221B PHY variants (VB-CG and VM-CG) were previously split into
separate C22 and C45 driver instances to support copper SFP modules
using the RollBall MDIO-over-I2C protocol, which only supports Clause-45
access. However, this split created significant code duplication and
complexity.
Commit 8af2136e77 ("net: phy: realtek: add helper
RTL822X_VND2_C22_REG") exposed that RealTek PHYs map all standard
Clause-22 registers into MDIO_MMD_VEND2 at offset 0xa400.
With commit 1850ec20d6 ("net: phy: realtek: use paged access for
MDIO_MMD_VEND2 in C22 mode") it is now possible to access all MMD
registers transparently, regardless of whether the PHY is accessed via
C22 or C45 MDIO.
Further improve the translation logic for this register mapping, so a
single unified driver works efficiently with both access methods,
reducing code duplication.
The series also includes cleanup to remove unnecessary paged operations
on registers that aren't actually affected by page selection.
Testing was done on RTL8211F and RTL8221B-VB-CG (the latter in both
C22 and C45 modes).
====================
Link: https://patch.msgid.link/cover.1768275364.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Only registers 0x10~0x17 are affected by the value in the page
selection register 0x1f. Hence there is no point in using paged
operations when accessing any other registers.
Simplify the driver by using the normal phy_read and phy_write
operations for registers which are anyway not affected by paging.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/0c5cbb66ce3e72a011d76f8c3d61ebcac44483bb.1768275364.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reunify the split C22/C45 drivers for the RTL8221B-VB-CG 2.5Gbps and
RTL8221B-VM-CG 2.5Gbps PHYs back into a single driver.
This is possible now by using all the driver operations previously used
by the C45 driver, as transparent access to all MMDs including
MDIO_MMD_VEND2 is now possible also over Clause-22 MDIO.
The unified driver will still only use Clause-45 access on any Clause-45
capable busses while still working fine on Clause-22 busses.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/bffcb85fdc20e07056976962d3caaa1be5d0ddb0.1768275364.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RealTek 2.5GE PHYs have all standard Clause-22 registers mapped also
inside MDIO_MMD_VEND2 at offset 0xa400. This is used mainly in case the
PHY is connected to a Clause-45-only bus. The RTL8221B is frequently
used in copper SFP module which uses the RollBall MDIO-over-I2C
method which *only* supports Clause-45, for example.
In order to support using the PHY on Clause-45-only busses, the PHY
driver has previously been split into a C22-only and C45-only instances,
creating quite a bit of redundancy and confusion.
In preparation of reunifying the two driver instances, add support for
translating MDIO_MMD_VEND2 registers 0xa400 to 0xa43c back to Clause-22
registers 0 to 30 in case the PHY is accessed on a Clause-22 bus.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/fd49d86bd0445b76269fd3ea456c709c2066683f.1768275364.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that access to MDIO_MMD_VEND2 works transparently also in Clause-22
mode, add interrupt support also for the C22 variants of the
RTL8221B-VB-CG and RTL8221B-VM-CG. This results in the C22 and C45
driver instances now having all the same features implemented.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/7620084b1de01580edc2d0e1b9548507fb4643a8.1768275364.git.daniel@makrotopia.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dwmac4's transmit performance dropped by a factor of four due to an
incorrect assumption about which definitions are for what. This
highlights the need for sane register macros.
Commit 8409495bf6 ("net: stmmac: cores: remove many xxx_SHIFT
definitions") changed the way the txpbl value is merged into the
register:
value = readl(ioaddr + DMA_CHAN_TX_CONTROL(dwmac4_addrs, chan));
- value = value | (txpbl << DMA_BUS_MODE_PBL_SHIFT);
+ value = value | FIELD_PREP(DMA_BUS_MODE_PBL, txpbl);
With the following in the header file:
#define DMA_BUS_MODE_PBL BIT(16)
-#define DMA_BUS_MODE_PBL_SHIFT 16
The assumption here was that DMA_BUS_MODE_PBL was the mask for
DMA_BUS_MODE_PBL_SHIFT, but this turns out not to be the case.
The field is actually six bits wide, buts 21:16, and is called
TXPBL.
What's even more confusing is, there turns out to be a PBLX8
single bit in the DMA_CHAN_CONTROL register (0x1100 for channel 0),
and DMA_BUS_MODE_PBL seems to be used for that. However, this bit
et.al. was listed under a comment "/* DMA SYS Bus Mode bitmap */"
which is for register 0x1004.
Fix this up by adding an appropriately named field definition under
the DMA_CHAN_TX_CONTROL() register address definition.
Move the RPBL mask definition under DMA_CHAN_RX_CONTROL(), correctly
renaming it as well.
Also move the PBL bit definition under DMA_CHAN_CONTROL(), correctly
renaming it.
This removes confusion over the PBL fields.
Fixes: 8409495bf6 ("net: stmmac: cores: remove many xxx_SHIFT definitions")
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Bisected-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://lore.kernel.org/51859704-57fd-4913-b09d-9ac58a57f185@bootlin.com
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vgY1k-00000003vOC-0Z1H@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima says:
====================
fou/gue: Fix skb memleak with inner protocol 0.
syzbot reported memleak for a GUE packet with its inner
protocol number 0.
Patch 1 fixes the issue, and patch 3 fixes the same issue
in FOU.
====================
Link: https://patch.msgid.link/20260115172533.693652-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fou_udp_recv() has the same problem mentioned in the previous
patch.
If FOU_ATTR_IPPROTO is set to 0, skb is not freed by
fou_udp_recv() nor "resubmit"-ted in ip_protocol_deliver_rcu().
Let's forbid 0 for FOU_ATTR_IPPROTO.
Fixes: 23461551c0 ("fou: Support for foo-over-udp RX path")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260115172533.693652-4-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
