Commit 74e19ef0ff ("uaccess: Add speculation barrier to
copy_from_user()") added a redundant barrier_nospec() in
copy_from_user(), because powerpc is already calling
barrier_nospec() in allow_read_from_user() and
allow_read_write_user(). But on other architectures that
call to barrier_nospec() was missing. So change powerpc
instead of reverting the above commit and having to fix
other architectures one by one. This is now possible
because barrier_nospec() has also been added in
copy_from_user_iter().
Move barrier_nospec() out of allow_read_from_user() and
allow_read_write_user(). This will also allow reuse of those
functions when implementing masked user access which doesn't
require barrier_nospec().
Don't add it back in raw_copy_from_user() as it is already called
by copy_from_user() and copy_from_user_iter().
Fixes: 74e19ef0ff ("uaccess: Add speculation barrier to copy_from_user()")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/f29612105c5fcbc8ceb7303808ddc1a781f0f6b5.1766574657.git.chleroy@kernel.org
Sysfs entry name is gc_pin_file_thresh instead of gc_pin_file_threshold,
fix it.
Cc: stable@kernel.org
Fixes: c521a6ab4a ("f2fs: fix to limit gc_pin_file_threshold")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
During SPO tests, when mounting F2FS, an -EINVAL error was returned from
f2fs_recover_inode_page. The issue occurred under the following scenario
Thread A Thread B
f2fs_ioc_commit_atomic_write
- f2fs_do_sync_file // atomic = true
- f2fs_fsync_node_pages
: last_folio = inode folio
: schedule before folio_lock(last_folio) f2fs_write_checkpoint
- block_operations// writeback last_folio
- schedule before f2fs_flush_nat_entries
: set_fsync_mark(last_folio, 1)
: set_dentry_mark(last_folio, 1)
: folio_mark_dirty(last_folio)
- __write_node_folio(last_folio)
: f2fs_down_read(&sbi->node_write)//block
- f2fs_flush_nat_entries
: {struct nat_entry}->flag |= BIT(IS_CHECKPOINTED)
- unblock_operations
: f2fs_up_write(&sbi->node_write)
f2fs_write_checkpoint//return
: f2fs_do_write_node_page()
f2fs_ioc_commit_atomic_write//return
SPO
Thread A calls f2fs_need_dentry_mark(sbi, ino), and the last_folio has
already been written once. However, the {struct nat_entry}->flag did not
have the IS_CHECKPOINTED set, causing set_dentry_mark(last_folio, 1) and
write last_folio again after Thread B finishes f2fs_write_checkpoint.
After SPO and reboot, it was detected that {struct node_info}->blk_addr
was not NULL_ADDR because Thread B successfully write the checkpoint.
This issue only occurs in atomic write scenarios. For regular file
fsync operations, the folio must be dirty. If
block_operations->f2fs_sync_node_pages successfully submit the folio
write, this path will not be executed. Otherwise, the
f2fs_write_checkpoint will need to wait for the folio write submission
to complete, as sbi->nr_pages[F2FS_DIRTY_NODES] > 0. Therefore, the
situation where f2fs_need_dentry_mark checks that the {struct
nat_entry}->flag /wo the IS_CHECKPOINTED flag, but the folio write has
already been submitted, will not occur.
Therefore, for atomic file fsync, sbi->node_write should be acquired
through __write_node_folio to ensure that the IS_CHECKPOINTED flag
correctly indicates that the checkpoint write has been completed.
Fixes: 608514deba ("f2fs: set fsync mark only for the last dnode")
Cc: stable@kernel.org
Signed-off-by: Sheng Yong <shengyong1@xiaomi.com>
Signed-off-by: Jinbao Liu <liujinbao1@xiaomi.com>
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
{struct file_ra_state}->ra_pages and {struct bio}->bi_iter.bi_size is
defined as unsigned int, so values of seq_file_ra_mul and max_io_bytes
exceeding UINT_MAX are meaningless.
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Some f2fs sysfs attributes suffer from out-of-bounds memory access and
incorrect handling of integer values whose size is not 4 bytes.
For example:
vm:~# echo 65537 > /sys/fs/f2fs/vde/carve_out
vm:~# cat /sys/fs/f2fs/vde/carve_out
65537
vm:~# echo 4294967297 > /sys/fs/f2fs/vde/atgc_age_threshold
vm:~# cat /sys/fs/f2fs/vde/atgc_age_threshold
1
carve_out maps to {struct f2fs_sb_info}->carve_out, which is a 8-bit
integer. However, the sysfs interface allows setting it to a value
larger than 255, resulting in an out-of-range update.
atgc_age_threshold maps to {struct atgc_management}->age_threshold,
which is a 64-bit integer, but its sysfs interface cannot correctly set
values larger than UINT_MAX.
The root causes are:
1. __sbi_store() treats all default values as unsigned int, which
prevents updating integers larger than 4 bytes and causes out-of-bounds
writes for integers smaller than 4 bytes.
2. f2fs_sbi_show() also assumes all default values are unsigned int,
leading to out-of-bounds reads and incorrect access to integers larger
than 4 bytes.
This patch introduces {struct f2fs_attr}->size to record the actual size
of the integer associated with each sysfs attribute. With this
information, sysfs read and write operations can correctly access and
update values according to their real data size, avoiding memory
corruption and truncation.
Fixes: b59d0bae6c ("f2fs: add sysfs support for controlling the gc_thread")
Cc: stable@kernel.org
Signed-off-by: Jinbao Liu <liujinbao1@xiaomi.com>
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In f2fs_read_data_large_folio(), read_pages_pending is incremented only
after the subpage has been added to the BIO. With a heavily fragmented
file, each new subpage can force submission of the previous BIO.
If the BIO completes quickly, f2fs_finish_read_bio() may decrement
read_pages_pending to zero and call folio_end_read() while the read loop
is still processing other subpages of the same large folio.
Fix the ordering by incrementing read_pages_pending before any possible
BIO submission for the current subpage, matching the iomap ordering and
preventing premature folio_end_read().
Signed-off-by: Nanzhe Zhao <nzzhao@126.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
f2fs_folio_state is attached to folio->private and is expected to start
with read_pages_pending == 0. However, the structure was allocated from
ffs_entry_slab without being fully initialized, which can leave
read_pages_pending with stale values.
Allocate the object with __GFP_ZERO so all fields are reliably zeroed at
creation time.
Signed-off-by: Nanzhe Zhao <nzzhao@126.com>
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a new sysfs node in /sys/fs/f2fs/<disk>/inject_lock_timeout,
it relies on CONFIG_F2FS_FAULT_INJECTION kernel config.
It can be used to simulate different type of timeout in lock duration.
========== ===============================
Flag_Value Flag_Description
========== ===============================
0x00000000 No timeout (default)
0x00000001 Simulate running time
0x00000002 Simulate IO type sleep time
0x00000003 Simulate Non-IO type sleep time
0x00000004 Simulate runnable time
========== ===============================
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduce a new fault type FAULT_LOCK_TIMEOUT, it can
be used to inject timeout into lock duration.
Timeout type can be set via /sys/fs/f2fs/<disk>/inject_timeout_type
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Sometimes, f2fs_io_schedule_timeout_killable(HZ) may delay for about 2
seconds, this is because __f2fs_schedule_timeout(DEFAULT_SCHEDULE_TIMEOUT)
may delay for about 2 * DEFAULT_SCHEDULE_TIMEOUT due to its precision, but
we only account the delay as DEFAULT_SCHEDULE_TIMEOUT as below, fix it.
f2fs_io_schedule_timeout_killable()
..
timeout -= DEFAULT_SCHEDULE_TIMEOUT;
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Due to timeout parameter in {io,}_schedule_timeout() is based on jiffies
unit precision. It will lose precision when using msecs_to_jiffies(x)
for conversion.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use f2fs_{down,up}_{read,write}_trace for io_rwsem to trace lock elapsed time.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use f2fs_{down,up}_write_trace for cp_global_sem to trace lock elapsed time.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use f2fs_{down,up}_write_trace for gc_lock to trace lock elapsed time.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use f2fs_{down,up}_read_trace for node_write to trace lock elapsed time.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use f2fs_{down,up}_read_trace for node_change to trace lock elapsed time.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Use f2fs_{down,up}_read_trace for cp_rwsem to trace lock elapsed time.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch add a new sysfs node in /sys/fs/f2fs/<device>/max_lock_elapsed_time.
This is a threshold, once a thread enters critical region that lock covers,
total elapsed time exceeds this threshold, f2fs will print tracepoint to dump
information of related context. This sysfs entry can be used to control the
value of threshold, by default, the value is 500 ms.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds lock elapsed time trace facility for f2fs rwsemphore.
If total elapsed time of critical region covered by lock exceeds a
threshold, it will print tracepoint to dump information of lock related
context, including:
- thread information
- CPU/IO priority
- lock information
- elapsed time
- total time
- running time (depend on CONFIG_64BIT)
- runnable time (depend on CONFIG_SCHED_INFO and CONFIG_SCHEDSTATS)
- io sleep time (depend on CONFIG_TASK_DELAY_ACCT and
/proc/sys/kernel/task_delayacct)
- other time (by default other time will account nonio sleep time,
but, if above kconfig is not defined, other time will
include runnable time and/or io sleep time as wll)
output:
f2fs_lock_elapsed_time: dev = (254,52), comm: sh, pid: 13855, prio: 120, ioprio_class: 2, ioprio_data: 4, lock_name: cp_rwsem, lock_type: rlock, total: 1000, running: 993, runnable: 2, io_sleep: 0, other: 5
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
During the garbage collection process, F2FS submits readahead I/Os for
valid blocks. However, since the GC loop runs within a single plug scope
without intermediate flushing, these readahead I/Os often accumulate in
the block layer's plug list instead of being dispatched to the device
immediately.
Consequently, when the GC thread attempts to lock the page later, the
I/O might not have completed (or even started), leading to a "read try
and wait" scenario. This negates the benefit of readahead and causes
unnecessary delays in GC latency.
This patch addresses this issue by introducing an intermediate
blk_finish_plug() and blk_start_plug() pair within the GC loop. This
forces the dispatch of pending I/Os, ensuring that readahead pages are
fetched in time, thereby reducing GC latency.
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
nvme_set_app_tag() uses the app_tag value from the bio_integrity_payload
of the struct request's first bio. This assumes all the request's bios
have the same app_tag. However, it is possible for bios with different
app_tag values to be merged into a single request.
Add a check in blk_integrity_merge_{bio,rq}() to prevent the merging of
bios/requests with different app_tag values if BIP_CHECK_APPTAG is set.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: 3d8b5a22d4 ("block: add support to pass user meta buffer")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The unlikely() annotations on QUEUE_FLAG_QOS_ENABLED checks are
counterproductive. Writeback throttling (WBT) might be enabled by
default, mainly because CONFIG_BLK_WBT_MQ defaults to 'y'.
Branch profiling on Meta servers, which have WBT enabled, confirms 100%
misprediction rates on these checks.
Remove the unlikely() annotations to let the CPU's branch predictor
learn the actual behavior, potentially improving I/O path performance.
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Yohei Kojima says:
====================
net: netdevsim: fix inconsistent carrier state after link/unlink
This series fixes netdevsim's inconsistent behavior between carrier
and link/unlink state.
More specifically, this fixes a bug that the carrier goes DOWN although
two netdevsim were peered, depending on the order of peering and ifup.
Especially in a NetworkManager-enabled environment, netdevsim test fails
because of this.
The first patch fixes the bug itself in netdevsim/bus.c by adding
netif_carrier_on() into a proper function. The second patch adds a
regression test for this bug.
====================
Link: https://patch.msgid.link/cover.1767624906.git.yk@y-koj.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit adds a test case for netdevsim carrier state consistency.
Specifically, the added test verifies the carrier state during the
following operations:
1. Unlink two netdevsims
2. ifdown one netdevsim, then ifup again
3. Link the netdevsims again
4. ifdown one netdevsim, then ifup again
These steps verifies that the carrier is UP iff two netdevsims are
linked and ifuped.
Signed-off-by: Yohei Kojima <yk@y-koj.net>
Link: https://patch.msgid.link/481e2729e53b6074ebfc0ad85764d8feb244de8c.1767624906.git.yk@y-koj.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch fixes the edge case behavior on ifup/ifdown and
linking/unlinking two netdevsim interfaces:
1. unlink two interfaces netdevsim1 and netdevsim2
2. ifdown netdevsim1
3. ifup netdevsim1
4. link two interfaces netdevsim1 and netdevsim2
5. (Now two interfaces are linked in terms of netdevsim peer, but
carrier state of the two interfaces remains DOWN.)
This inconsistent behavior is caused by the current implementation,
which only cares about the "link, then ifup" order, not "ifup, then
link" order. This patch fixes the inconsistency by calling
netif_carrier_on() when two netdevsim interfaces are linked.
This patch fixes buggy behavior on NetworkManager-based systems which
causes the netdevsim test to fail with the following error:
# timeout set to 600
# selftests: drivers/net/netdevsim: peer.sh
# 2025/12/25 00:54:03 socat[9115] W address is opened in read-write mode but only supports read-only
# 2025/12/25 00:56:17 socat[9115] W connect(7, AF=2 192.168.1.1:1234, 16): Connection timed out
# 2025/12/25 00:56:17 socat[9115] E TCP:192.168.1.1🔢 Connection timed out
# expected 3 bytes, got 0
# 2025/12/25 00:56:17 socat[9109] W exiting on signal 15
not ok 13 selftests: drivers/net/netdevsim: peer.sh # exit=1
This patch also solves timeout on TCP Fast Open (TFO) test in
NetworkManager-based systems because it also depends on netdevsim's
carrier consistency.
Fixes: 1a8fed52f7 ("netdevsim: set the carrier when the device goes up")
Signed-off-by: Yohei Kojima <yk@y-koj.net>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/602c9e1ba5bb2ee1997bb38b1d866c9c3b807ae9.1767624906.git.yk@y-koj.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The key use for static-branches are not refrenced by name outside
of the security/security.c file, so make them static. This stops
the sparse warnings about "Should it be static?" such as:
security/security.c: note: in included file:
./include/linux/lsm_hook_defs.h:29:1: warning: symbol
'security_hook_active_binder_set_context_mgr_0' was not declared.
Should it be static?
./include/linux/lsm_hook_defs.h:29:1: warning: symbol
'security_hook_active_binder_set_context_mgr_1' was not declared.
Should it be static?
...
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
[PM: trimmed sparse output for line-length, readability]
Signed-off-by: Paul Moore <paul@paul-moore.com>
The function set_security_override_from_ctx() has no in-tree callers
since 6.14. Remove it.
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
[PM: subject tweak, merge fuzz]
Signed-off-by: Paul Moore <paul@paul-moore.com>
The pp_alloc_fail.py test (which doesn't run in NIPA CI?) uses tool, add
back the import.
Resolves:
ImportError: cannot import name 'tool' from 'lib.py'
Fixes: 68a052239f ("selftests: drv-net: update remaining Python init files")
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20260105163319.47619-1-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Emil Tsalapatis says:
====================
bpf/verifier: Allow calling arena functions when holding BPF lock
BPF arena-related kfuncs now cannot sleep, so they are safe to call
while holding a spinlock. However, the verifier still rejects
programs that do so. Update the verifier to allow arena kfunc
calls while holding a lock.
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Changes v1->v2: (https://lore.kernel.org/r/20260106-arena-under-lock-v1-0-6ca9c121d826@etsalapatis.com)
- Added patch to account for active locks in_sleepable_context() (AI)
====================
Link: https://patch.msgid.link/20260106-arena-under-lock-v2-0-378e9eab3066@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The bpf_arena_*_pages() kfuncs can be called from sleepable contexts,
but the verifier still prevents BPF programs from calling them while
holding a spinlock. Amend the verifier to allow for BPF programs
calling arena page management functions while holding a lock.
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260106-arena-under-lock-v2-2-378e9eab3066@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The in_sleepable_context() function is used to specialize the BPF code
in do_misc_fixups(). With the addition of nonsleepable arena kfuncs,
there are kfuncs whose specialization depends on whether we are
holding a lock. We should use the nonsleepable version while
holding a lock and the sleepable one when not.
Add a check for active_locks to account for locking when specializing
arena kfuncs.
Signed-off-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260106-arena-under-lock-v2-1-378e9eab3066@etsalapatis.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Introduce minimal tests. These can serve as simple illustrative
examples, and as templates when writing new tests.
When adding new cases, it can be easier to extend an existing base
test rather than start from scratch. The existing tests all focus on
real, often non-trivial, features. It is not obvious which to take as
starting point, and arguably none really qualify.
Add two tests
- the client test performs the active open and initial close
- the server test implements the passive open and final close
Signed-off-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260105172529.3514786-1-willemdebruijn.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The optional and required hints in the tcp_congestion_ops are information
for the user of this interface to signalize its importance when
implementing these functions.
However, cong_avoid comment incorrectly tells that it is required,
in reality congestion control must provide one of either cong_avoid or
cong_control.
In addition, min_tso_segs has not had any comment optional/required
hints. So mark it as optional since it is used only in BBR.
Co-developed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Daniel Sedlak <daniel.sedlak@cdn77.com>
Link: https://patch.msgid.link/20260105115533.1151442-1-daniel.sedlak@cdn77.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is needed to inline these helpers into Rust code.
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
This is needed to inline these helpers into Rust code.
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The current flow control implementation doesn't handle autonegotiation
and ethtool operations properly. Remove it for now so we don't claim
support for something that doesn't really work. A better implementation
will be sent in future patches.
Signed-off-by: Vivian Wang <wangruikang@iscas.ac.cn>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260104-k1-ethernet-actually-remove-fc-v3-1-3871b055064c@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the Google Virtual Ethernet (GVE) driver to use the new
.get_rx_ring_count ethtool operation instead of handling
ETHTOOL_GRXRINGS in .get_rxnfc. This simplifies the code by moving the
ring count query to a dedicated callback.
The new callback provides the same functionality in a more direct way,
following the ongoing ethtool API modernization.
Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260105-gxring_google-v2-1-e7cfe924d429@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some arches (like x86) do not inline spin_unlock_irqrestore().
backlog_unlock_irq_restore() is in RPS/RFS critical path,
we prefer using spin_unlock() + local_irq_restore() for
optimal performance.
Also change backlog_unlock_irq_restore() second argument
to avoid a pointless dereference.
No difference in net/core/dev.o code size.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260105163054.13698-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We expect the SFP write accessors to return the number of written bytes.
We fail to do so for single-byte smbus accesses, which may cause errors
when setting a module's high-power state and for some cotsworks modules.
Let's return the amount of written bytes, as expected.
Fixes: 7662abf4db ("net: phy: sfp: Add support for SMBus module access")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260105151840.144552-1-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add additional machines that requires communication to the SC firmware
to set the GPR bit required for stop mode support.
NXP i.MX8DX (fsl,imx8dx) is a low end version of i.MX8QXP (fsl,imx8qxp),
while NXP i.MX8QP (fsl,imx8qp) is a low end version of i.MX8QM
(fsl,imx8qm).
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260105152452.84338-1-francesco@dolcini.it
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace rio_probe1() printk(KERN_INFO) messages with netdev_{info,dbg}().
Keep one netdev_info() line for device identification; move the rest to
netdev_dbg() to avoid spamming the kernel log.
Log rx_timeout on a separate line since netdev_*() prefixes each
message and the multi-line formatting looks broken otherwise.
No functional change intended.
Tested-on: D-Link DGE-550T Rev-A3
Signed-off-by: Yeounsu Moon <yyyynoom@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20260105130552.8721-2-yyyynoom@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
