drain_fw_reset() waits for ongoing firmware reset events and blocks new
event handling, but does not clear the reset requested flag, and may
keep sync reset polling.
To fix it, call mlx5_sync_reset_clear_reset_requested() to clear the
flag, stop sync reset polling, and resume health polling, ensuring
health issues are still detected after the firmware reset drain.
Fixes: 16d42d3133 ("net/mlx5: Drain fw_reset when removing device")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Shay Drori <shayd@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1765284977-1363052-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Daniel Golle says:
====================
net: dsa: lantiq: a bunch of fixes
This series is the continuation and result of comments received for a fix
for the SGMII restart-an bit not actually being self-clearing, which was
reported by by Rasmus Villemoes.
A closer investigation and testing the .remove and the .shutdown paths
of the mxl-gsw1xx.c and lantiq_gswip.c drivers has revealed a couple of
existing problems, which are also addressed in this series.
====================
Link: https://patch.msgid.link/cover.1765241054.git.daniel@makrotopia.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Despite being documented as self-clearing, the RANEG bit sometimes
remains set, preventing auto-negotiation from happening.
Manually clear the RANEG bit after 10ms as advised by MaxLinear.
In order to not hold RTNL during the 10ms of waiting schedule
delayed work to take care of clearing the bit asynchronously, which
is similar to the self-clearing behavior.
Fixes: 22335939ec ("net: dsa: add driver for MaxLinear GSW1xx switch family")
Reported-by: Rasmus Villemoes <ravi@prevas.dk>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/76745fceb5a3f53088110fb7a96acf88434088ca.1765241054.git.daniel@makrotopia.org
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The .shutdown operation should call dsa_switch_shutdown() just like
it is done also by the sibling lantiq_gswip driver. Not doing that
results in shutdown or reboot hanging and waiting for the CPU port
becoming free, which introduces a longer delay and a WARNING before
shutdown or reboot in case the driver is built-into the kernel.
Fix this by calling dsa_switch_shutdown() in the driver's shutdown
operation, harmonizing it with what is done in the lantiq_gswip
driver. As a side-effect this now allows to remove the previously
exported gswip_disable_switch() function which no longer got any
users.
Fixes: 22335939ec ("net: dsa: add driver for MaxLinear GSW1xx switch family")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/77ed91a5206e5dbf5d3e83d7e364ebfda90d31fd.1765241054.git.daniel@makrotopia.org
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The driver's .remove operation was calling gswip_disable_switch() which
clears the GSWIP_MDIO_GLOB_ENABLE bit before calling
dsa_unregister_switch() and thereby violating a Golden Rule of driver
development to always unpublish userspace interfaces before disabling
hardware, as pointed out by Russell King.
Fix this by relying in GSWIP_MDIO_GLOB_ENABLE being cleared by the
.teardown operation introduced by the previous commit
("net: dsa: lantiq_gswip: fix teardown order").
Fixes: 22335939ec ("net: dsa: add driver for MaxLinear GSW1xx switch family")
Suggested-by: "Russell King (Oracle)" <linux@armlinux.org.uk>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/63f882eeb910cf24503c35a443b541cc54a930f2.1765241054.git.daniel@makrotopia.org
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Russell King pointed out that disabling the switch by clearing
GSWIP_MDIO_GLOB_ENABLE before calling dsa_unregister_switch() is
problematic, as it violates a Golden Rule of driver development to
always first unpublish userspace interfaces and then disable the
hardware.
Fix this, and also simplify the probe() function, by introducing a
dsa_switch_ops teardown() operation which takes care of clearing the
GSWIP_MDIO_GLOB_ENABLE bit.
Fixes: 14fceff477 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Suggested-by: "Russell King (Oracle)" <linux@armlinux.org.uk>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Link: https://patch.msgid.link/4ebd72a29edc1e4059b9666a26a0bb5d906a829a.1765241054.git.daniel@makrotopia.org
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We know the address of the underlying remote software node referenced by
the GPIO property (if it is a software node). We don't need to compare
its name, we can compare its address which is more precise anyway.
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Tested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20251215154624.67099-1-bartosz.golaszewski@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
The ethtool -S command operates across three ioctl calls:
ETHTOOL_GSSET_INFO for the size, ETHTOOL_GSTRINGS for the names, and
ETHTOOL_GSTATS for the values.
If the number of stats changes between these calls (e.g., due to device
reconfiguration), userspace's buffer allocation will be incorrect,
potentially leading to buffer overflow.
Drivers are generally expected to maintain stable stat counts, but some
drivers (e.g., mlx5, bnx2x, bna, ksz884x) use dynamic counters, making
this scenario possible.
Some drivers try to handle this internally:
- bnad_get_ethtool_stats() returns early in case stats.n_stats is not
equal to the driver's stats count.
- micrel/ksz884x also makes sure not to write anything beyond
stats.n_stats and overflow the buffer.
However, both use stats.n_stats which is already assigned with the value
returned from get_sset_count(), hence won't solve the issue described
here.
Change ethtool_get_strings(), ethtool_get_stats(),
ethtool_get_phy_stats() to not return anything in case of a mismatch
between userspace's size and get_sset_size(), to prevent buffer
overflow.
The returned n_stats value will be equal to zero, to reflect that
nothing has been returned.
This could result in one of two cases when using upstream ethtool,
depending on when the size change is detected:
1. When detected in ethtool_get_strings():
# ethtool -S eth2
no stats available
2. When detected in get stats, all stats will be reported as zero.
Both cases are presumably transient, and a subsequent ethtool call
should succeed.
Other than the overflow avoidance, these two cases are very evident (no
output/cleared stats), which is arguably better than presenting
incorrect/shifted stats.
I also considered returning an error instead of a "silent" response, but
that seems more destructive towards userspace apps.
Notes:
- This patch does not claim to fix the inherent race, it only makes sure
that we do not overflow the userspace buffer, and makes for a more
predictable behavior.
- RTNL lock is held during each ioctl, the race window exists between
the separate ioctl calls when the lock is released.
- Userspace ethtool always fills stats.n_stats, but it is likely that
these stats ioctls are implemented in other userspace applications
which might not fill it. The added code checks that it's not zero,
to prevent any regressions.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20251208121901.3203692-1-gal@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In case of interrupt based transfer, when the transfer is very
small, relying on interrupts leads to lower performances than if
the transfer were done using polling on the registers.
Add a module parameter "polling_limit_us" to indicate the threshold
in us from which a transfer would be done polling the registers rather
than relying on interrupts.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://patch.msgid.link/20251218-stm32-spi-enhancements-v2-3-3b69901ca9fe@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When SPI communication is suspended by hardware automatically, it could
happen that few bits of next frame are already clocked out due to
internal synchronization delay.
To achieve a safe suspension, we need to ensure that each word must be
at least 8 SPI clock cycles long. That's why, if bpw is less than 8
bits, we need to use midi to reach 8 SPI clock cycles at least.
This will ensure that each word achieve safe suspension and prevent
overrun condition.
Signed-off-by: Deepak Kumar <deepak.kumar01@st.com>
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://patch.msgid.link/20251218-stm32-spi-enhancements-v2-2-3b69901ca9fe@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Correct handling of the dma_request_chan call in order to avoid
misleading warn message if no DMA is provided within the device-tree
and moreover fail if dma_request_chan has returned a valid error.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Link: https://patch.msgid.link/20251218-stm32-spi-enhancements-v2-1-3b69901ca9fe@foss.st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some mysterious reasons the GCC 8 and 9 preprocessor manages to
sporadically fumble _ASM_BYTES(0x0f, 0x0b):
$ grep ".byte[ ]*0x0f" defconfig-build/drivers/net/wireless/realtek/rtlwifi/base.s
1: .byte0x0f,0x0b ;
1: .byte 0x0f,0x0b ;
which makes the assembler upset and all that. While there are more
_ASM_BYTES() users (notably the NOP instructions), those don't seem
affected. Therefore replace the offending ASM_UD2 with one using the
ud2 mnemonic.
Reported-by: Jean Delvare <jdelvare@suse.de>
Suggested-by: Uros Bizjak <ubizjak@gmail.com>
Fixes: 85a2d4a890 ("x86,ibt: Use UDB instead of 0xEA")
Cc: stable@kernel.org
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251218104659.GT3911114@noisy.programming.kicks-ass.net
Update the OSS email addresses across all Coresight documents, as the
previous addresses have been deprecated.
Signed-off-by: Jie Gan <jie.gan@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250902042143.1010-1-jie.gan@oss.qualcomm.com
syzkaller noticed that with fault injection a failure inside
iommu_alloc_pages_node_sz() oops's in PT_FEAT_DMA_INCOHERENT because it goes
on to make NULL incoherent. Closer inspection shows the return value has
become confused, the alloc routines on the iommupt side expect ERR_PTR while
iommu_alloc_pages_node_sz() returns NULL.
Error out early to fix both issues.
Fixes: aefd967dab ("iommupt: Use the incoherent start/stop functions for PT_FEAT_DMA_INCOHERENT")
Fixes: dcd6a011a8 ("iommupt: Add map_pages op")
Fixes: cdb39d9185 ("iommupt: Add the basic structure of the iommu implementation")
Reported-by: syzbot+e06bb7478e687f235ad7@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/693a39de.050a0220.4004e.02ce.GAE@google.com/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
TCAL6408 and TCAL6416 supports latchable inputs and maskable interrupt.
add compatibles ti,tcal6408 and ti,tcal6416
The TI variants has the same programming model as the NXP PCAL6408 and
PCAL6416, but supports other supply voltages.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Jan Remmet <j.remmet@phytec.de>
Link: https://lore.kernel.org/r/20251216-wip-jremmet-tcal6416rtw-v2-2-6516d98a9836@phytec.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Since we can only inspect dmabuf by iterating over process FDs or the
dmabuf_list, we need to add our own tracepoints to track its status in
real time in production.
For example:
binder:3016_1-3102 [006] ...1. 255.126521: dma_buf_export: exp_name=qcom,system size=12685312 ino=2738
binder:3016_1-3102 [006] ...1. 255.126528: dma_buf_fd: exp_name=qcom,system size=12685312 ino=2738 fd=8
binder:3016_1-3102 [006] ...1. 255.126642: dma_buf_mmap_internal: exp_name=qcom,system size=28672 ino=2739
kworker/6:1-86 [006] ...1. 255.127194: dma_buf_put: exp_name=qcom,system size=12685312 ino=2738
RenderThread-9293 [006] ...1. 316.618179: dma_buf_get: exp_name=qcom,system size=12771328 ino=2762 fd=176
RenderThread-9293 [006] ...1. 316.618195: dma_buf_dynamic_attach: exp_name=qcom,system size=12771328 ino=2762 attachment:ffffff880a18dd00 is_dynamic=0 dev_name=kgsl-3d0
RenderThread-9293 [006] ...1. 318.878220: dma_buf_detach: exp_name=qcom,system size=12771328 ino=2762 attachment:ffffff880a18dd00 is_dynamic=0 dev_name=kgsl-3d0
Signed-off-by: Xiang Gao <gaoxiang17@xiaomi.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20251218062853.819744-1-gxxa03070307@gmail.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Drop the wait_prepare/finish callbacks. Instead require that the vb2_queue
lock field is always set and use that lock when waiting for buffers to
arrive.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Since vb2 now relies on the presence of the vb2_queue lock
field and there are no more drivers that use these helpers, it is safe
to drop them.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Since commit 88785982a1 ("media: vb2: use lock if wait_prepare/finish
are NULL") it is no longer needed to set the wait_prepare/finish
vb2_ops callbacks as long as the lock field in vb2_queue is set.
Set the queue lock to &ctx->mutex, which makes it possible to drop
the wait_prepare/finish callbacks.
This simplifies the code and this is a step towards the goal of deleting
these callbacks.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
vb2 no longer requires locking around mmap since commit
f035eb4e97 ("[media] videobuf2: fix lockdep warning").
Since the streaming I/O mode for DVB support is by default off, and
the dvb utilities were never updated with streaming support, and
we never had regression tests for this streaming mode, this was
never noticed before.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Currently the buffers are being filled until full, which works fine
for the transport stream, but not when reading sections, those have
to be returned to userspace immediately, otherwise dvbv5-scan will
just wait forever.
Add a 'flush' argument to dvb_vb2_fill_buffer to indicate whether
the buffer must be flushed or wait until it is full.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Call drm_dev_exit() before returning -EINVAL.
Fixes: cd2c9c3015 ("drm/panthor: Add flag to map GEM object Write-Back Cacheable")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/aUOxxvXXtHHfFCcg@stanley.mountain
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Switch error injection testing from i915_inject_probe_failure
to ALLOW_ERROR_INJECTION. Here taken out calls to
i915_inject_probe_failure and changed to use
ALLOW_ERROR_INJECTION for the same functions.
Below functions are dropped from testing since I
couldn't hit those at module bind time, testing
these would just fail the tests. To include these
in test would need to find way to cause resetting in i915
which would trigger these:
intel_gvt_init
intel_wopcm_init
intel_uc_fw_upload
intel_gt_init with expected -EIO (-EINVAL is tested)
lrc_init_wa_ctx
intel_huc_auth
guc_check_version_range
intel_uc_fw_fetch
uc_fw_xfer
__intel_uc_reset_hw
guc_enable_communication
uc_init_wopcm
..and all stages of __force_fw_fetch_failures
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patch.msgid.link/20251216080754.221974-2-juhapekka.heikkila@gmail.com
In cases where the ww_mutex test was occasionally tripping on
hard to find issues, leaving qemu in a reboot loop was my best
way to reproduce problems. These reboots however wasted time
when I just wanted to run the test-ww_mutex logic.
So tweak the test-ww_mutex test so that it can be re-triggered
via a sysfs file, so the test can be run repeatedly without
doing module loads or restarting.
This has been particularly valuable to stressing and finding
issues with the proxy-exec series.
To use, run as root:
echo 1 > /sys/kernel/test_ww_mutex/run_tests
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251205013515.759030-4-jstultz@google.com
The test-ww_mutex test already allocates its own workqueue
so be sure to use it for the mtx.work and abba.work rather
then the default system workqueue.
This resolves numerous messages of the sort:
"workqueue: test_abba_work hogged CPU... consider switching to WQ_UNBOUND"
"workqueue: test_mutex_work hogged CPU... consider switching to WQ_UNBOUND"
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251205013515.759030-3-jstultz@google.com
Currently the test-ww_mutex tool only utilizes the wait-die
class of ww_mutexes, and thus isn't very helpful in exercising
the wait-wound class of ww_mutexes.
So extend the test to exercise both classes of ww_mutexes for
all of the subtests.
Signed-off-by: John Stultz <jstultz@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251205013515.759030-2-jstultz@google.com
clang needs __always_inline instead of inline, even for tiny helpers.
This saves some cycles in system call fast path, and saves 195 bytes
on x86_64 build:
$ size vmlinux.before vmlinux.after
text data bss dec hex filename
34652814 22291961 5875180 62819955 3be8e73 vmlinux.before
34652619 22291961 5875180 62819760 3be8db0 vmlinux.after
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251204153127.1321824-1-edumazet@google.com
Merge series from Anurag Dutta <a-dutta@ti.com>:
This series addresses issues in the cadence-quadspi driver's probe
error path:
Patch 1 fixes a clock disable imbalance that occurs when probe fails
after runtime PM is enabled, particularly when DMA request returns
-EPROBE_DEFER.
Patch 2 adds proper error logging for DMA request failures using
dev_err_probe() to improve diagnostics and handle probe deferral
appropriately.
logs : https://gist.github.com/anuragdutta731/59925cd11a50913b7128c88cd5394db7
Rename rockchip_pcie_get_ltssm() to rockchip_pcie_get_ltssm_reg() and add
rockchip_pcie_get_ltssm() to get_ltssm() callback in order to show the
proper L1 Substates. The PCIE_CLIENT_LTSSM_STATUS[5:0] register returns
the same LTSSM layout as enum dw_pcie_ltssm. So the driver just need to
convey L1 PM Substates by returning the proper value defined in
pcie-designware.h.
cat /sys/kernel/debug/dwc_pcie_a40000000.pcie/ltssm_status
L1_2 (0x142)
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/1765503205-22184-2-git-send-email-shawn.lin@rock-chips.com
DWC core couldn't distinguish LTSSM state among L1.0, L1.1 and L1.2. But
the vendor glue driver may implement additional logic to convey this
information. So add two pseudo definitions for vendor glue drivers to
translate their internal L1 Substates for debugfs to show.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/1765503205-22184-1-git-send-email-shawn.lin@rock-chips.com
Merge series from Haibo Chen <haibo.chen@nxp.com>:
XSPI is a flexible SPI host controller which supports up to
2 external devices (2 CS). It support Single/Dual/Quad/Octal
mode data transfer.
The difference between XSPI and Flexspi is XSPI support
multiple independent execution environments (EENVs) for HW
virtualization with some limitations. Each EENV has its own
interrupt and its own set of programming registers that exists
in a specific offset range in the XSPI memory map.
The main environment (EENV0) address space contains all of the
registers for controlling EENV0 plus all of the general XSPI
control and programming registers. The register mnemonics for
the user environments (EENV1 to EENV4) have "_SUB_n" appended
to the mnemonic for the corresponding main-environment register.
Current driver based on EENV0, which means system already give
EENV0 right to linux.
This driver use SPI memory interface of the SPI framework to issue
flash memory operations. Tested this driver with mtd_debug and
UBIFS on NXP i.MX943 EVK board which has one MT35XU512ABA spi nor
flash. NOw this driver has the following key features:
- Support up to OCT DDR mode
- Support AHB read
- Support IP read and IP write
- Support two CS
Replace manual "request_threaded_irq()" with the device managed
"devm_request_threaded_irq" to manage the IRQ lifetime and also
it removes the smatch reported warning.
Remove the manual "free_irq()" in the "remove" function as free_irq
is tied to device teardown.
Signed-off-by: HariKrishna Sagala <hariconscious@gmail.com>
Link: https://patch.msgid.link/20251217054458.38257-2-hariconscious@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently device is using hardcoded slave properties
using the .read_prop callback from "struct sdw_slave_ops".
This patch removes this and uses the sdw_slave_read_prop API
to read the data directly from the ACPI table.
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251215153219.810-8-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for parsing the initilisation
data from ACPI table. This table is required to configure
each device correctly so that correct channel's data is
selected during playback.
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20251215153219.810-7-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add changes to support 4 tas2783A devices on mtl platform.
The supported unique IDs are updated to 9, a, c, d, where
c and d are configured to play left channels and 9 and a
are configured to play right channel.
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Link: https://patch.msgid.link/20251215153219.810-6-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The firmware file for tas2783A contains the device
and algorithm settings. So the firmware files are unique
for a system and driver should have the ability to
distinctly identify and pick the right firmware.
This commit adds the method to uniquely identify the
firmware for a system based on the below format.
<Subsystem>-<Link>-<Unique>.bin
* Subsystem is the PCI device subsystem-id
* Link is the SoundWire link id on which the device recides.
* Unique is the SoundWire slave unique id in the system.
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Link: https://patch.msgid.link/20251215153219.810-5-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently when the calibration is not found, it is wrongly
logged as device is not found. Fix this error message to
indicate that calibration data is not valid instead.
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Link: https://patch.msgid.link/20251215153219.810-4-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove unwanted initialistaion writes to the
device which will now be part of the either firmware
or acpi table.
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Link: https://patch.msgid.link/20251215153219.810-3-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the firmware version same as in Windows
projects. The firmware contains algorithm
parameters and some device configuration
writes which are part of the same firmware file.
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Link: https://patch.msgid.link/20251215153219.810-2-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently the machine driver for tas2783A can only
support 2 channels. This patch adds support for
2 channel playback with 4 device setup.
Signed-off-by: Niranjan H Y <niranjan.hy@ti.com>
Link: https://patch.msgid.link/20251215153219.810-1-niranjan.hy@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace the manual `unsafe { core::mem::zeroed() }` initialization of
`bindings::file_operations` with `pin_init::zeroed()`. This removes the
explicit unsafe
Signed-off-by: Atharv Dubey <atharvd440@gmail.com>
Link: https://patch.msgid.link/20251201152759.16429-1-atharvd440@gmail.com
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
In mtk_pcie_init_irq_domain(), if mtk_pcie_allocate_msi_domains()
fails after port->irq_domain has been successfully created via
irq_domain_create_linear(), the function returns directly without
cleaning up the allocated IRQ domain, resulting in a resource leak.
Add irq_domain_remove() call in the error path to properly release the
INTx IRQ domain before returning the error.
Fixes: 43e6409db6 ("PCI: mediatek: Add MSI support for MT2712 and MT7622")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20251119023308.476-1-vulab@iscas.ac.cn
Arnd Bergmann's patch [1] fixed the build dependency problem introduced by
bugfix commit cb2dc6d286 ("can: Kconfig: select CAN driver infrastructure
by default"). This ended up as commit 6abd4577bc ("can: fix build
dependency"), but I broke Arnd's fix by removing a dependency that we
thought was superfluous.
[1] https://lore.kernel.org/all/20251204100015.1033688-1-arnd@kernel.org/
Meanwhile the problem was also found by intel's kernel test robot,
complaining about undefined symbols:
| ERROR: modpost: "m_can_class_unregister" [drivers/net/can/m_can/m_can_platform.ko] undefined!
| ERROR: modpost: "m_can_class_free_dev" [drivers/net/can/m_can/m_can_platform.ko] undefined!
| ERROR: modpost: "m_can_class_allocate_dev" [drivers/net/can/m_can/m_can_platform.ko] undefined!
| ERROR: modpost: "m_can_class_get_clocks" [drivers/net/can/m_can/m_can_platform.ko] undefined!
| ERROR: modpost: "m_can_class_register" [drivers/net/can/m_can/m_can_platform.ko] undefined!
To fix this problem, add the missing dependency again.
Cc: Vincent Mailhol <mailhol@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512132253.vO9WFDJK-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202512180808.fTAUQ2XN-lkp@intel.com/
Reported-by: Arnd Bergmann <arnd@arndb.de>
Closes: https://lore.kernel.org/all/7427949a-ea7d-4854-9fe4-e01db7d878c7@app.fastmail.com/
Fixes: 6abd4577bc ("can: fix build dependency")
Fixes: cb2dc6d286 ("can: Kconfig: select CAN driver infrastructure by default")
Acked-by: Vincent Mailhol <mailhol@kernel.org>
Link: https://patch.msgid.link/20251217-can-fix-dependency-v1-1-fd2d4f2a2bf5@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
