DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma, brcm,sr-thermal,
amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions Owl SPS, Marvell
AP80x System Controller, Marvell CP110 System Controller,
cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data() helpers
and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the code
to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e. in
a parent node) on nodes without an interrupt. This matches the spec
description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI
-----BEGIN PGP SIGNATURE-----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=ZM/+
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma,
brcm,sr-thermal, amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions
Owl SPS, Marvell AP80x System Controller, Marvell CP110 System
Controller, cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema
format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform
compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data()
helpers and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the
code to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e.
in a parent node) on nodes without an interrupt. This matches the
spec description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI"
* tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: kbuild: Skip validating empty examples
dt-bindings: interrupt-controller: brcm,bcm2836-l1-intc: Drop interrupt-controller requirement
dt-bindings: display: Fix brcm,bcm2835-hvs bindings for BCM2712
dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712
of: Skip devicetree kunit tests when RISCV+ACPI doesn't populate root node
soc: tegra: Simplify with of_machine_device_match()
soc: qcom: ubwc: Simplify with of_machine_get_match_data()
powercap: dtpm: Simplify with of_machine_get_match_data()
platform: surface: Simplify with of_machine_get_match_data()
irqchip/atmel-aic: Simplify with of_machine_get_match_data()
firmware: qcom: scm: Simplify with of_machine_device_match()
cpuidle: big_little: Simplify with of_machine_device_match()
cpufreq: sun50i: Simplify with of_machine_device_match()
cpufreq: mediatek: Simplify with of_machine_get_match_data()
cpufreq: dt-platdev: Simplify with of_machine_get_match_data()
of: Add wrappers to match root node with OF device ID tables
dt-bindings: eeprom: at25: Add Anvo ANV32C81W
of/reserved_mem: Simplify the logic of __reserved_mem_alloc_size()
of/reserved_mem: Simplify the logic of fdt_scan_reserved_mem_reg_nodes()
of/reserved_mem: Simplify the logic of __reserved_mem_reserve_reg()
...
-----BEGIN PGP SIGNATURE-----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=7Jr3
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2025120201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- Proper mapping of HID_GD_Z to ABS_DISTANCE for stylus/pen types of
devices (Ping Cheng)
- Power management/hibernation improvements in intel-ish (Zhang Lixu)
- Improved support for several Logitech devices, e.g. G Pro X
Superlight 2, new iteration of Lighspeed receiver, G13, G510 (Nathan
Rossi, Mavroudis Chatzilazaridis, Leo L Schwab, Hans de Goede)
- Support for UcLogic XP-PEN Artist 24 Pro (Joshua Goins)
- WinWing Orion2 throttle support improvement (Ivan Gorinov)
- other assorted small fixes and device ID additions
* tag 'hid-for-linus-2025120201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (37 commits)
drivers: hid: renegotiate resolution multipliers with device after reset
HID: evision: Fix Report Descriptor for Evision Wireless Receiver 320f:226f
HID: logitech-dj: Fix probe failure when used with KVM
HID: logitech-dj: Remove duplicate error logging
HID: logitech-dj: Add support for G Pro X Superlight 2 receiver
selftests/hid-tablet: add ABS_DISTANCE test for stylus/pen
HID: input: map HID_GD_Z to ABS_DISTANCE for stylus/pen
HID: bpf: fix typo in HID usage table
HID: bpf: add the Huion Kamvas 27 Pro
HID: bpf: add heuristics to the Huion Inspiroy 2S eraser button
HID: bpf: Add support for XP-Pen Deco02
HID: bpf: Add support for the XP-Pen Deco 01 V3
HID: bpf: Add support for the Waltop Batteryless Tablet
HID: bpf: Add fixup for Logitech SpaceNavigator variants
HID: bpf: support for Huion Kamvas 16 Gen 3
HID: bpf: add support for Huion Kamvas 13 (Gen 3) (model GS1333)
HID: bpf: Add support for the Inspiroy 2M
Documentation: hid-alps: Format DataByte* subsection headings
Documentation: hid-alps: Fix packet format section headings
HID: nintendo: add WQ_PERCPU to alloc_workqueue users
...
When interrupting perf stat in repeat mode with a signal the signal is
passed to the child process but the repeat doesn't terminate:
```
$ perf stat -v --null --repeat 10 sleep 1
Control descriptor is not initialized
[ perf stat: executing run #1 ... ]
[ perf stat: executing run #2 ... ]
^Csleep: Interrupt
[ perf stat: executing run #3 ... ]
[ perf stat: executing run #4 ... ]
[ perf stat: executing run #5 ... ]
[ perf stat: executing run #6 ... ]
[ perf stat: executing run #7 ... ]
[ perf stat: executing run #8 ... ]
[ perf stat: executing run #9 ... ]
[ perf stat: executing run #10 ... ]
Performance counter stats for 'sleep 1' (10 runs):
0.9500 +- 0.0512 seconds time elapsed ( +- 5.39% )
0.01user 0.02system 0:09.53elapsed 0%CPU (0avgtext+0avgdata 18940maxresident)k
29944inputs+0outputs (0major+2629minor)pagefaults 0swaps
```
Terminate the repeated run and give a reasonable exit value:
```
$ perf stat -v --null --repeat 10 sleep 1
Control descriptor is not initialized
[ perf stat: executing run #1 ... ]
[ perf stat: executing run #2 ... ]
[ perf stat: executing run #3 ... ]
^Csleep: Interrupt
Performance counter stats for 'sleep 1' (10 runs):
0.680 +- 0.321 seconds time elapsed ( +- 47.16% )
Command exited with non-zero status 130
0.00user 0.01system 0:02.05elapsed 0%CPU (0avgtext+0avgdata 70688maxresident)k
0inputs+0outputs (0major+5002minor)pagefaults 0swaps
```
Note, this also changes the exit value for non-repeat runs when
interrupted by a signal.
Reported-by: Ingo Molnar <mingo@kernel.org>
Closes: https://lore.kernel.org/lkml/aS5wjmbAM9ka3M2g@gmail.com/
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Add a test that if an offline CPU is requested perf stat will fail.
$ perf test -vv "perf stat tests"
101: perf stat tests:
--- start ---
test child forked, pid 46965
Basic stat command test
Basic stat command test [Success]
Null stat command test
Null stat command test [Success]
Offline CPU stat command test (cpu 8)
Offline CPU stat command test [Success]
stat record and report test
stat record and report test [Success]
stat record and script test
stat record and script test [Success]
stat repeat weak groups test
stat repeat weak groups test [Success]
Topdown event group test
Topdown event group test [Success]
Topdown weak groups test
Topdown weak groups test [Skipped event parsing failed]
cputype test
cputype test [Success]
hybrid test
hybrid test [Success]
---- end(0) ----
101: perf stat tests : Ok
Reported-by: Thomas Richter <tmricht@linux.ibm.com>
Closes: https://lore.kernel.org/linux-perf-users/94313b82-888b-4f42-9fb0-4585f9e90080@linux.ibm.com/
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
* Add support for Awinic AW99706 backlight driver.
* Add GPIOLIB dependency to backlight ktd2801 driver.
* Add devlink to LED Backlight's supplier LEDs to enforce correct removal
order and prevent NULL pointer dereferences.
* Fix kernel-doc warnings in lp855x.h
* Do not include <linux/fb.h> in backlight.h.
* Fix unused function warnings from suspend/resume ops in aw99706.c by
switching to DEFINE_SIMPLE_DEV_PM_OPS and using pm_ptr().
* Add Awinic AW99706 backlight binding to MAINTAINERS.
* Add Awinic AW99706 backlight binding documentation.
-----BEGIN PGP SIGNATURE-----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=n4gn
-----END PGP SIGNATURE-----
Merge tag 'backlight-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"Additions:
- Add support for Awinic AW99706 backlight driver
Fixes:
- Add GPIOLIB dependency to backlight ktd2801 driver
- Add devlink to LED Backlight's supplier LEDs to enforce correct
removal order and prevent NULL pointer dereferences
- Fix kernel-doc warnings in lp855x.h
Removals:
- Do not include <linux/fb.h> in backlight.h
- Fix unused function warnings from suspend/resume ops in aw99706.c
by switching to DEFINE_SIMPLE_DEV_PM_OPS and using pm_ptr()
Bindings:
- Add Awinic AW99706 backlight binding to MAINTAINERS
- Add Awinic AW99706 backlight binding documentation"
* tag 'backlight-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: aw99706: Fix unused function warnings from suspend/resume ops
backlight: lp855x: Fix lp855x.h kernel-doc warnings
dt-bindings: leds: backlight: Add Awinic AW99706 backlight
backlight: aw99706: Add support for Awinic AW99706 backlight
backlight: led-bl: Add devlink to supplier LEDs
backlight: ktd2801: Depend on GPIOLIB
backlight: Do not include <linux/fb.h> in header file
* Add optional GPIO enable pin support to PWM LED driver.
* Allow LED module 0 to be added to module bank in lp50xx driver.
* Fix upboard LED driver module alias to ensure proper auto-loading.
* Update LP5009 to support 3 modules for a total of 9 LEDs.
* Skip LEDs without color components in cros_ec driver instead of failing probe.
* Fix GPIO descriptor leaks in netxbig error paths by releasing acquired GPIOs.
* Allow LED_COLOR_ID_MULTI in qcom-lpg driver for greater flexibility.
* Enable LP55XX common LED use without FW_LOADER_USER_HELPER.
* Ensure lp50xx chip is enabled before any I2C communication.
* Use fwnode_for_each_child_node() instead of fwnode_for_each_available_child_node()
in LED drivers.
* Use device_get_next_child_node() instead of fwnode_get_next_available_child_node()
in LED flash drivers.
* Replace sprintf() with sysfs_emit() in sysfs show functions for improved
bounds checking.
* Replace system_wq() with system_percpu_wq() in the input event trigger.
* Reorder include files to alphabetic order in the PWM LED driver.
* Do not enable TRILED in qcom-lpg when configuring PWM.
* Drop duplicate LEDS_EXPRESSWIRE config from Kconfig.
* Remove arcxcnn_bl.txt Device Tree binding documentation.
* Convert ArcticSand arc2c0608 LED driver binding to DT Schema.
* Add default-brightness property to common LED binding.
* Add enable-gpios property to PWM LED binding.
* Add PM7550 to qcom,spmi-flash-led compatible.
* Explain standalone PWM usage in qcom-lpg binding.
-----BEGIN PGP SIGNATURE-----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=/TDJ
-----END PGP SIGNATURE-----
Merge tag 'leds-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
"Updates:
- Add optional GPIO enable pin support to PWM LED driver
Fixes:
- Allow LED module 0 to be added to module bank in lp50xx driver
- Fix upboard LED driver module alias to ensure proper auto-loading
- Update LP5009 to support 3 modules for a total of 9 LEDs
- Skip LEDs without color components in cros_ec driver instead of
failing probe
- Fix GPIO descriptor leaks in netxbig error paths by releasing
acquired GPIOs
- Allow LED_COLOR_ID_MULTI in qcom-lpg driver for greater flexibility
- Enable LP55XX common LED use without FW_LOADER_USER_HELPER
- Ensure lp50xx chip is enabled before any I2C communication
Cleanups:
- Use fwnode_for_each_child_node() instead of
fwnode_for_each_available_child_node() in LED drivers
- Use device_get_next_child_node() instead of
fwnode_get_next_available_child_node() in LED flash drivers
- Replace sprintf() with sysfs_emit() in sysfs show functions for
improved bounds checking
- Replace system_wq() with system_percpu_wq() in the input event
trigger
- Reorder include files to alphabetic order in the PWM LED driver
- Do not enable TRILED in qcom-lpg when configuring PWM
- Drop duplicate LEDS_EXPRESSWIRE config from Kconfig
Removals:
- Remove arcxcnn_bl.txt Device Tree binding documentation
Devicetree bindings:
- Convert ArcticSand arc2c0608 LED driver binding to DT Schema
- Add default-brightness property to common LED binding
- Add enable-gpios property to PWM LED binding
- Add PM7550 to qcom,spmi-flash-led compatible
- Explain standalone PWM usage in qcom-lpg binding"
* tag 'leds-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (21 commits)
leds: rgb: leds-qcom-lpg: Don't enable TRILED when configuring PWM
dt-bindings: leds: qcom-lpg: Explain standalone PWM usage
leds: rgb: leds-qcom-lpg: Allow LED_COLOR_ID_MULTI
leds: pwm: Reorder include files to alphabetic order
leds: pwm: Add optional GPIO enable pin support
dt-bindings: leds: pwm: Add enable-gpios property
leds: trigger: Replace use of system_wq() with system_percpu_wq()
leds: led-class: Replace sprintf() with sysfs_emit() in sysfs show functions
dt-bindings: leds: qcom,spmi-flash-led: Add PM7550
leds: netxbig: Fix GPIO descriptor leak in error paths
leds: leds-lp50xx: Enable chip before any communication
leds: Drop duplicate LEDS_EXPRESSWIRE config
leds: leds-cros_ec: Skip LEDs without color components
leds: leds-lp50xx: LP5009 supports 3 modules for a total of 9 LEDs
leds: upboard: Fix module alias
leds: leds-lp50xx: Allow LED 0 to be added to module bank
leds: lp55xx_common: Enable use without FW_LOADER_USER_HELPER
dt-bindings: leds: Add default-brightness property to common.yaml
leds: flash: Use fwnode_get_next_child_node() instead
leds: Use fwnode_for_each_child_node() instead
...
* Add Core, Regulator, Onkey and Battery Charger support for the NXP PF1550
Power Management IC (PMIC).
* Introduce __SMC_KEY macro to fix GCC 15.2.1 errors in macsmc.
* Add board definitions for TQMxCU1-HPCM and TQMxCU2-HPCM to the tqmx86 driver.
* Add support for Broadcom BCM2712 SoC to the bcm2835-pm driver.
* Hook up the qnap-mcu-eeprom sub-device to qnap-mcu.
* Enable compile testing for the Altera SOCFPGA System Manager driver.
* Fix device reference leak in altr_sysmgr_regmap_lookup_by_phandle().
* Reserve the unused second I2C address for DA9063 to prevent userspace
interference.
* Fix resource leak in da9055_device_init() by calling regmap_del_irq_chip()
in the error path.
* Fix potential IRQ chip conflict when probing multiple MAX77620 devices by
using devm_kmemdup for regmap_irq_chip.
* Return -EPROBE_DEFER when a syscon devuice is not found to allow deferred
probing.
* Update email address for the PF1550 PMIC driver in MAINTAINERS.
* Correct file entry for PF1550 MFD driver in MAINTAINERS from pfd1550.h to
pf1550.h.
* Calculate checksum on the actual number of received bytes in qnap-mcu for
error messages.
* Use -EPROTO instead of -EIO for checksum errors in qnap-mcu.
* Add proper error handling for command errors (e.g., "@8", "@9") in qnap-mcu.
* Fix missing irq_domain_remove() in error path of mt63{58,97}_irq_init().
* Mark SMC write buffer arguments as const in apple_smc_write(), apple_smc_rw(),
and apple_smc_write_atomic().
* Simplify the error handling path in da9055_device_init() by removing a
redundant mfd_remove_devices() call.
* Use regmap_reg_range() and a real one-element array for pmic_status_range in
rohm-bd718x7 for cleaner initialization.
* Remove select I2C_K1 from MFD_SPACEMIT_P1 to avoid build failures when
I2C_K1's dependencies are disabled.
* Remove unneeded semicolon from ls2k_bmc_recover_pci_data().
* Drop OF dependency for MFD_MAX5970 in Kconfig to allow wider compile testing
and non-OF systems.
* Make OF ID table style consistent in simple-mfd-i2c driver.
* Update header inclusions in simple-mfd-i2c to follow IWYU (Include What You
Use) principle.
* Move checksum verification logic to a separate function in qnap-mcu.
* Use chained IRQs for S2MPG10 in the Samsung SEC driver to simplify interrupt
handling.
* Drop a stray semicolon from sec-irq.c.
* Remove the unused TI WL1273 FM radio core driver.
* Remove the unused wl1273-core.h header and tidy up its reference in
documentation.
* Add Device Tree binding for the NXP PF1550 PMIC.
* Add missing GPIO pins and supply properties to the Silergy SY7636A PMIC
binding.
* Add interrupt-controller property to the Maxim MAX77705 binding for
sub-device interrupt source determination.
* Add Device Tree binding for the Renesas R2A11302FT PMIC.
* Allow the wakeup-source property in the Dialog DA9063 binding.
* Make interrupt-related properties optional in the TI TPS65910 PMIC binding.
* Document the Qualcomm PMIV0104 PMIC compatible string.
* Document the Qualcomm PM7550 PMIC compatible string.
* Enable power button subnode for TWL603x in the TI TWL binding.
* Convert the Dialog DA9052/53 I2C binding from .txt to .yaml format,
including compatible string fallback and interrupt properties.
* Document control-scb and sysreg-scb syscons on pic64gx with fallback
compatibles.
* Document sama7g5-sfrbu and sama7d65-sfrbu syscons with fallback to
atmel,sama5d2-sfrbu.
* Fix LEDs node schema in fsl,mc13xxx binding by adding led@ child nodes and
missing properties.
* Add mt7981-topmisc compatible string to the syscon binding.
-----BEGIN PGP SIGNATURE-----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=2TS8
-----END PGP SIGNATURE-----
Merge tag 'mfd-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Updates:
- Add Core, Regulator, Onkey and Battery Charger support for the NXP
PF1550 Power Management IC (PMIC)
- Introduce __SMC_KEY macro to fix GCC 15.2.1 errors in macsmc
- Add board definitions for TQMxCU1-HPCM and TQMxCU2-HPCM to the
tqmx86 driver
- Add support for Broadcom BCM2712 SoC to the bcm2835-pm driver
- Hook up the qnap-mcu-eeprom sub-device to qnap-mcu
Fixes:
- Enable compile testing for the Altera SOCFPGA System Manager driver
- Fix device reference leak in altr_sysmgr_regmap_lookup_by_phandle()
- Reserve the unused second I2C address for DA9063 to prevent
userspace interference
- Fix resource leak in da9055_device_init() by calling
regmap_del_irq_chip() in the error path
- Fix potential IRQ chip conflict when probing multiple MAX77620
devices by using devm_kmemdup for regmap_irq_chip
- Return -EPROBE_DEFER when a syscon devuice is not found to allow
deferred probing
- Update email address for the PF1550 PMIC driver in MAINTAINERS
- Correct file entry for PF1550 MFD driver in MAINTAINERS from
pfd1550.h to pf1550.h
- Calculate checksum on the actual number of received bytes in
qnap-mcu for error messages
- Use -EPROTO instead of -EIO for checksum errors in qnap-mcu
- Add proper error handling for command errors (e.g., "@8", "@9") in
qnap-mcu
- Fix missing irq_domain_remove() in error path of
mt63{58,97}_irq_init()
Cleanups:
- Mark SMC write buffer arguments as const in apple_smc_write(),
apple_smc_rw(), and apple_smc_write_atomic()
- Simplify the error handling path in da9055_device_init() by
removing a redundant mfd_remove_devices() call
- Use regmap_reg_range() and a real one-element array for
pmic_status_range in rohm-bd718x7 for cleaner initialization
- Remove select I2C_K1 from MFD_SPACEMIT_P1 to avoid build failures
when I2C_K1's dependencies are disabled
- Remove unneeded semicolon from ls2k_bmc_recover_pci_data()
- Drop OF dependency for MFD_MAX5970 in Kconfig to allow wider
compile testing and non-OF systems
- Make OF ID table style consistent in simple-mfd-i2c driver
- Update header inclusions in simple-mfd-i2c to follow IWYU (Include
What You Use) principle
- Move checksum verification logic to a separate function in qnap-mcu
- Use chained IRQs for S2MPG10 in the Samsung SEC driver to simplify
interrupt handling
- Drop a stray semicolon from sec-irq.c
Removals:
- Remove the unused TI WL1273 FM radio core driver
- Remove the unused wl1273-core.h header and tidy up its reference in
documentation
Device tree bindings:
- Add Device Tree binding for the NXP PF1550 PMIC
- Add missing GPIO pins and supply properties to the Silergy SY7636A
PMIC binding
- Add interrupt-controller property to the Maxim MAX77705 binding for
sub-device interrupt source determination
- Add Device Tree binding for the Renesas R2A11302FT PMIC
- Allow the wakeup-source property in the Dialog DA9063 binding
- Make interrupt-related properties optional in the TI TPS65910 PMIC
binding
- Document the Qualcomm PMIV0104 PMIC compatible string
- Document the Qualcomm PM7550 PMIC compatible string
- Enable power button subnode for TWL603x in the TI TWL binding
- Convert the Dialog DA9052/53 I2C binding from .txt to .yaml format,
including compatible string fallback and interrupt properties
- Document control-scb and sysreg-scb syscons on pic64gx with
fallback compatibles
- Document sama7g5-sfrbu and sama7d65-sfrbu syscons with fallback to
atmel,sama5d2-sfrbu
- Fix LEDs node schema in fsl,mc13xxx binding by adding led@ child
nodes and missing properties
- Add mt7981-topmisc compatible string to the syscon binding"
* tag 'mfd-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (42 commits)
mfd: sec: Drop a stray semicolon
mfd: qnap-mcu: Hook up the EEPROM sub-device
dt-bindings: mfd: syscon: Add mt7981-topmisc
dt-bindings: mfd: fsl,mc13xxx: Fix LEDs node schema
mfd: mt6358-irq: Fix missing irq_domain_remove() in error path
mfd: mt6397-irq: Fix missing irq_domain_remove() in error path
dt-bindings: mfd: Document syscons falling back to atmel,sama5d2-sfrbu
dt-bindings: mfd: Document control-scb and sysreg-scb on pic64gx
dt-bindings: mfd: Convert dlg,da9052-i2c.txt to yaml format
mfd: sec: Use chained IRQs for s2mpg10
mfd: qnap-mcu: Add proper error handling for command errors
mfd: qnap-mcu: Move checksum verification to its own function
mfd: qnap-mcu: Use EPROTO in stead of EIO on checksum errors
mfd: qnap-mcu: Calculate the checksum on the actual number of bytes received
mfd: simple-mfd-i2c: Don't use "proxy" headers
mfd: simple-mfd-i2c: Make ID table style consistent
mfd: Kconfig: Drop OF dependency on MFD_MAX5970
mfd: ls2kbmc: Remove unneeded semicolon from ls2k_bmc_recover_pci_data()
dt-bindings: mfd: twl: Enable power button also for TWL603X
MAINTAINERS: Adjust file entry in NXP PF1550 PMIC MFD DRIVER
...
The struct io_uring_buf elements in a buffer ring are in a memory region
accessible from userspace. A malicious/buggy userspace program could
therefore write to them at any time, so they should be accessed with
READ_ONCE() in the kernel. Commit 98b6fa62c8 ("io_uring/kbuf: always
use READ_ONCE() to read ring provided buffer lengths") already switched
the reads of the len field to READ_ONCE(). Do the same for bid and addr.
Signed-off-by: Caleb Sander Mateos <csander@purestorage.com>
Fixes: c7fb19428d ("io_uring: add support for ring mapped supplied buffers")
Cc: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
With authentication, in addition to EKEYREJECTED there is also no point in
retrying reconnects when status is ENOKEY. Thus, add -ENOKEY as another
criteria to determine when to stop retries.
Cc: Daniel Wagner <wagi@kernel.org>
Cc: Hannes Reinecke <hare@suse.de>
Closes: https://lore.kernel.org/linux-nvme/20250829-nvme-fc-sync-v3-0-d69c87e63aee@kernel.org/
Signed-off-by: Justin Tee <justintee8345@gmail.com>
Tested-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Memory allocated by kvcalloc() may come from vmalloc or kmalloc,
so use kvfree() instead of kfree() for proper deallocation.
Fixes: aa36d711e9 ("nvme-auth: convert dhchap_auth_list to an array")
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Replace kcalloc with kvcalloc for allocation of the commands
array. Each command structure is 712 bytes. The array typically
exceeds a single page, and grows much larger with high queue depths
(e.g., commands >182KB).
kvcalloc automatically falls back to vmalloc for large or fragmented
allocations, improving reliability. In our case, this memory is not
aimed for DMA operations and could be safely allocated by kvcalloc.
Using virtually contiguous memory helps to avoid allocation failures
and out-of-memory conditions common with kcalloc on large pools.
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Replace kcalloc with kvcalloc for allocation of the commands and
responses arrays. Each command structure is 272 bytes and each
response structure is 672 bytes. These arrays typically exceed a
single page, and grow much larger with high queue depths
(e.g., commands >2MB, responses >170KB)
kvcalloc automatically falls back to vmalloc for large or fragmented
allocations, improving reliability. In our case, this memory is not
aimed for DMA operations and could be safely allocated by kvcalloc.
Using virtually contiguous memory helps to avoid allocation failures
and out-of-memory conditions common with kcalloc on large pools.
Signed-off-by: Israel Rukshin <israelr@nvidia.com>
Reviewed-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
When cloning with node replacements (IORING_REGISTER_DST_REPLACE),
destination entries after the cloned range are not copied over.
Add logic to copy them over to the new destination table.
Fixes: c1329532d5 ("io_uring/rsrc: allow cloning with node replacements")
Cc: stable@vger.kernel.org
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Many of the nvmet-fc log messages cannot print the device used, because
it's not there yet:
(NULL device *): {0:0} Association deleted
Use the pr_* macros consistently throughout the module and match the
output of the nvme-fc module.
Using port:association ids are more useful when debugging what's going
on, because these match now with the log entries from nvme-fc.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The variable holds nodes from the destination ring's existing buffer
table. In io_clone_buffers(), the term "src" is used to refer to the
source ring.
Rename to node for clarity.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Get rid of some redundant checks and move the src arg validation to
before the buffer table allocation, which simplifies error handling.
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Nothing is using lsdir member in struct fcloop_lsreq.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
When the remoteport or the targetport are removed check that there are
no inflight requests or responses.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
When the rport is removed there shouldn't be any in flight request or
responses.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Move the fatal signal check before bio_alloc() to prevent a memory
leak when BLKDEV_ZERO_KILLABLE is set and a fatal signal is pending.
Previously, the bio was allocated before checking for a fatal signal.
If a signal was pending, the code would break out of the loop without
freeing or chaining the just-allocated bio, causing a memory leak.
This matches the pattern already used in __blkdev_issue_write_zeroes()
where the signal check precedes the allocation.
Fixes: bf86bcdb40 ("blk-lib: check for kill signal in ioctl BLKZEROOUT")
Reported-by: syzbot+527a7e48a3d3d315d862@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=527a7e48a3d3d315d862
Signed-off-by: Shaurya Rane <ssrane_b23@ee.vjti.ac.in>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Tested-by: syzbot+527a7e48a3d3d315d862@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
REQ_OP_ZONE_RESET_ALL is a zone management request, and op_is_zone_mgmt()
has returned true for it.
Update the comment to remove the misleading exception note so
the documentation matches the implementation.
Fixes: 12a1c9353c ("block: fix op_is_zone_mgmt() to handle REQ_OP_ZONE_RESET_ALL")
Signed-off-by: shechenglong <shechenglong@xfusion.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit fe0418eb9b ("block: Prevent potential deadlocks in zone write
plug error recovery") added a WARN check in disk_put_zone_wplug() to
verify that when the last reference to a zone write plug is dropped,
this zone write plug does not have the BLK_ZONE_WPLUG_PLUGGED flag set,
that is, that it is not plugged.
However, the function disk_zone_wplug_abort(), which is called for zone
reset and zone finish operations, does not clear this flag after
emptying a zone write plug BIO list. This can result in the
disk_put_zone_wplug() warning to trigger if the user (erroneously as
that is bad pratcice) issues zone reset or zone finish operations while
the target zone still has plugged BIOs.
Modify disk_put_zone_wplug() to clear the BLK_ZONE_WPLUG_PLUGGED flag.
And while at it, also add a lockdep annotation to ensure that this
function is called with the zone write plug spinlock held.
Fixes: fe0418eb9b ("block: Prevent potential deadlocks in zone write plug error recovery")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Allow more host caps to be modified through debugfs
- Skip to set the default 200mA SD current limit
MMC host:
- Convert a few more DT bindings to the DT schema
- dw_mmc: Add Shawn Lin as co-maintainer for the dw_mmc drivers
- dw_mmc-rockchip: Add memory clock auto-gating support
- dw_mmc-rockchip: Add support for the RK3506 variant
- meson-mx-sdio: Ignore disabled "mmc-slot" child-nodes
- meson-mx-sdio: Refactoring and general code improvements
- renesas_sdhi: Enable bigger data ports where available
- renesas_sdhi: Manage reset in probe and during system-wide suspend/resume
- sdhci-brcmstb: Add support for the BCM72116 and BCM74371 variants
- sdhci-brcmstb: Save/restore registers during system-wide suspend/resume
- sdhci-msm: Add support for the sm8750 and the Kaanapali variants
- sdhci-msm: Avoid early clock doubling during HS400 transition
- sdhci-of-dwcmshc: Add command queue support for Rockchip SOCs
- sdhci-of-dwcmshc: Add support for the Eswin EIC7700 variant
-----BEGIN PGP SIGNATURE-----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=Gf5H
-----END PGP SIGNATURE-----
Merge tag 'mmc-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Allow more host caps to be modified through debugfs
- Skip to set the default 200mA SD current limit
MMC host:
- Convert a few more DT bindings to the DT schema
- dw_mmc: Add Shawn Lin as co-maintainer for the dw_mmc drivers
- dw_mmc-rockchip:
- Add memory clock auto-gating support
- Add support for the RK3506 variant
- meson-mx-sdio:
- Ignore disabled "mmc-slot" child-nodes
- Refactoring and general code improvements
- renesas_sdhi:
- Enable bigger data ports where available
- Manage reset in probe and during system-wide suspend/resume
- sdhci-brcmstb:
- Add support for the BCM72116 and BCM74371 variants
- Save/restore registers during system-wide suspend/resume
- sdhci-msm:
- Add support for the sm8750 and the Kaanapali variants
- Avoid early clock doubling during HS400 transition
- sdhci-of-dwcmshc:
- Add command queue support for Rockchip SOCs
- Add support for the Eswin EIC7700 variant"
* tag 'mmc-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (40 commits)
mmc: sdhci-of-dwcmshc: reduce CIT for better performance
mmc: sdhci-of-dwcmshc: Disable internal clock auto gate for Rockchip SOCs
mmc: sdhci-msm: Avoid early clock doubling during HS400 transition
MAINTAINERS: Add Shawn Lin as co-maintainer for dw_mmc drivers
mmc: sdhci-of-dwcmshc: Fix command queue support for RK3576
mmc: renesas_sdhi: Add suspend/resume hooks
mmc: renesas_sdhi: Switch to SYSTEM_SLEEP_PM_OPS()/RUNTIME_PM_OPS() and pm_ptr()
mmc: renesas_sdhi: Deassert the reset signal on probe
dt-bindings: mmc: am654: Simplify dma-coherent property
mmc: meson-mx-sdio: Ignore disabled "mmc-slot" child-nodes
mmc: meson-mx-sdio: Fix indentation in meson_mx_mmc_irq_thread()
mmc: meson-mx-sdio: Use dev_err_probe() where appropriate
mmc: meson-mx-sdio: Use devm_mmc_alloc_host() helper
mmc: meson-mx-sdio: Refactor internal clock initialization
mmc: meson-mx-sdio: Use devm_clk_get_enabled()
mmc: meson-mx-sdio: Switch to regmap for register access
mmc: core: add WQ_PERCPU to alloc_workqueue users
mmc: dw_mmc-rockchip: Add memory clock auto-gating support
mmc: omap: add WQ_PERCPU to alloc_workqueue users
mmc: mtk-sd: replace use of system_wq with system_percpu_wq
...
- Allow power-off for out-of-band wakeup-capable devices
- Drop the redundant call to dev_pm_domain_detach() for the amba bus
- Extend the genpd governor for CPUs to account for IPIs
pmdomain providers:
- bcm: Add support for BCM2712
- mediatek: Add support for MFlexGraphics power domains
- mediatek: Add support for MT8196 power domains
- qcom: Add RPMh power domain support for Kaanapali
- rockchip: Add support for RV1126B
pmdomain consumers:
- usb: dwc3: Enable out of band wakeup for i.MX95
- usb: chipidea: Enable out of band wakeup for i.MX95
-----BEGIN PGP SIGNATURE-----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=Fkue
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Allow power-off for out-of-band wakeup-capable devices
- Drop the redundant call to dev_pm_domain_detach() for the amba bus
- Extend the genpd governor for CPUs to account for IPIs
pmdomain providers:
- bcm: Add support for BCM2712
- mediatek: Add support for MFlexGraphics power domains
- mediatek: Add support for MT8196 power domains
- qcom: Add RPMh power domain support for Kaanapali
- rockchip: Add support for RV1126B
pmdomain consumers:
- usb: dwc3: Enable out of band wakeup for i.MX95
- usb: chipidea: Enable out of band wakeup for i.MX95"
* tag 'pmdomain-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (26 commits)
pmdomain: Extend the genpd governor for CPUs to account for IPIs
smp: Introduce a helper function to check for pending IPIs
pmdomain: mediatek: convert from clk round_rate() to determine_rate()
amba: bus: Drop dev_pm_domain_detach() call
pmdomain: bcm: bcm2835-power: Prepare to support BCM2712
pmdomain: mediatek: mtk-mfg: select MAILBOX in Kconfig
pmdomain: mediatek: Add support for MFlexGraphics
pmdomain: mediatek: Fix build-errors
cpuidle: psci: Replace deprecated strcpy in psci_idle_init_cpu
pmdomain: rockchip: Add support for RV1126B
pmdomain: mediatek: Add support for MT8196 HFRPSYS power domains
pmdomain: mediatek: Add support for MT8196 SCPSYS power domains
pmdomain: mediatek: Add support for secure HWCCF infra power on
pmdomain: mediatek: Add support for Hardware Voter power domains
pmdomain: qcom: rpmhpd: Add RPMh power domain support for Kaanapali
usb: dwc3: imx8mp: Set out of band wakeup for i.MX95
usb: chipidea: ci_hdrc_imx: Set out of band wakeup for i.MX95
usb: chipidea: core: detach power domain for ci_hdrc platform device
pmdomain: core: Allow power-off for out-of-band wakeup-capable devices
PM: wakeup: Add out-of-band system wakeup support for devices
...
Add new debugfs entry "guc_log_lfd", prepared for output guc log
in LFD(Log Format Descriptors) format.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251127170759.2620994-7-zhanjun.dong@intel.com
Add GuC crash dump data empty check. LFD will only include crash dump
section when data is not empty.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251127170759.2620994-6-zhanjun.dong@intel.com
Add GuC LFD (Log Format Descriptors) related ABI definitions.
Signed-off-by: Zhanjun Dong <zhanjun.dong@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patch.msgid.link/20251127170759.2620994-3-zhanjun.dong@intel.com
Exec_queue's are only used for OAR/OAC functionality for OAG unit. Make
this requirement explicit, which avoids complications in the code for
other (non-OAG) OA units.
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20251202025115.373546-4-ashutosh.dixit@intel.com
gt_id was previously omitted from 'struct drm_xe_oa_unit' because it could
be determine from hwe's attached to the OA unit. However, we now have OA
units which don't have any hwe's attached to them. Hence add gt_id to
'struct drm_xe_oa_unit' in order to provide this needed information to
userspace.
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20251202025115.373546-3-ashutosh.dixit@intel.com
Use explicit struct initialization for struct xe_oa_regs to reduce chance
of error. Also add .oa_mmio_trg field to struct for completeness.
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patch.msgid.link/20251202025115.373546-2-ashutosh.dixit@intel.com
GPIO core:
- add proper support for shared GPIOs that's aiming to replace the
current sharing mechanism (which provides no synchronization ot enable
counting) and enable it for Qualcomm platforms
- improve the software node GPIO lookup by using the fwnode
representation instead of the software node's name which was prone to
bugs (GPIO controllers don't have to use the software node's name as
their kernel label)
- remove the last user of legacy-of-mm-gpiochip.h and drop the header
- move closer to removing the legacy gpio_request_one() routine
- rename some symbols for consistency
- shrink GPIO printk() helpers by reusing existing code
- remove some redundant kernel messages
- use min() instead of min_t() in GPIO ACPI code
- use system_percpu_wq instead of system_wq in GPIO character device code
New drivers:
- add a driver for the QIXIS FPGA GPIO controller
Driver improvements:
- use modernized variants of power management macros across a wide array
of drivers in order to avoid having to use the __maybe_unused attribute
- convert gpio-elkhartlake and reset-gpio to using the auxiliary bus
instead of the platform bus as they are not really described in
firmware
- use lock guards and update symbol prefixes in gpio-mmio
- support the bryx radio interface kit in gpio-mpsse + refactor the
driver
- use software nodes for configuring the reset-gpio driver, including
setting up the reference to the shared "reset" pin
- check and propagate the return value of gpiod_set_value() to user-space
in gpio-virtuser (this was previously not possible as this function
returned void)
- extend the gpio-regmap helper with more features (bypass cache for
aliased inputs, force writes for aliased data registers, add a new
configuration parameter)
- remove unneeded includes from gpio-aspeed and gpio-latch
- add support for Tegra410 to gpio-tegra186
- replace PCI-specific PM with generic device-level PM in gpio-bt8xx
- use dynamic GPIO range allocation in gpio-loongson-64bit
- improve handling of level-triggered interrupts in gpio-pca953x
- add suspend/resume support to gpio-fxl6408
- add support for more models to gpio-menz127
- optimize gpio-mvebu interrupt handling by avoiding unnecessary calls
to mvebu_gpio_irq_handler()
- make locking more consistent in gpio-grgpio
Device-tree bindings:
- document new NXP and Microchip models
Documentation:
- add a comprehensive compatibility and feature list for gpio-pca953x,
which is a great addition as it's probably the most commonly used GPIO
expander driver
- kernel-doc tweaks
Late fixes:
- use BYTE_CTRL_MODE for 2K2000/3000 models in gpio-loongson
-----BEGIN PGP SIGNATURE-----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=Mw+x
-----END PGP SIGNATURE-----
Merge tag 'gpio-updates-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"There's one new driver, lots of various updates to existing ones, some
refactoring support for new models and misc tweaks and fixes.
The biggest new feature in GPIO core is adding support for managed,
enable-counted sharing of GPIO pins, something that - until now - was
only hacked around with the GPIOD_FLAGS_BIT_NONEXCLUSIVE request flag
which basically allowed drivers to "fight it out" for the descriptor
and provided no synchronization. It was enabled on Qualcomm platforms
(and thus is enabled on arm64 defconfig) and I plan on removing
GPIOD_FLAGS_BIT_NONEXCLUSIVE once all drivers using it are switched to
the new mechanism.
GPIO core:
- add proper support for shared GPIOs that's aiming to replace the
current sharing mechanism (which provides no synchronization ot
enable counting) and enable it for Qualcomm platforms
- improve the software node GPIO lookup by using the fwnode
representation instead of the software node's name which was prone
to bugs (GPIO controllers don't have to use the software node's
name as their kernel label)
- remove the last user of legacy-of-mm-gpiochip.h and drop the header
- move closer to removing the legacy gpio_request_one() routine
- rename some symbols for consistency
- shrink GPIO printk() helpers by reusing existing code
- remove some redundant kernel messages
- use min() instead of min_t() in GPIO ACPI code
- use system_percpu_wq instead of system_wq in GPIO character device
code
New drivers:
- add a driver for the QIXIS FPGA GPIO controller
Driver improvements:
- use modernized variants of power management macros across a wide
array of drivers in order to avoid having to use the __maybe_unused
attribute
- convert gpio-elkhartlake and reset-gpio to using the auxiliary bus
instead of the platform bus as they are not really described in
firmware
- use lock guards and update symbol prefixes in gpio-mmio
- support the bryx radio interface kit in gpio-mpsse + refactor the
driver
- use software nodes for configuring the reset-gpio driver, including
setting up the reference to the shared "reset" pin
- check and propagate the return value of gpiod_set_value() to
user-space in gpio-virtuser (this was previously not possible as
this function returned void)
- extend the gpio-regmap helper with more features (bypass cache for
aliased inputs, force writes for aliased data registers, add a new
configuration parameter)
- remove unneeded includes from gpio-aspeed and gpio-latch
- add support for Tegra410 to gpio-tegra186
- replace PCI-specific PM with generic device-level PM in gpio-bt8xx
- use dynamic GPIO range allocation in gpio-loongson-64bit
- improve handling of level-triggered interrupts in gpio-pca953x
- add suspend/resume support to gpio-fxl6408
- add support for more models to gpio-menz127
- optimize gpio-mvebu interrupt handling by avoiding unnecessary
calls to mvebu_gpio_irq_handler()
- make locking more consistent in gpio-grgpio
Device-tree bindings:
- document new NXP and Microchip models
Documentation:
- add a comprehensive compatibility and feature list for
gpio-pca953x, which is a great addition as it's probably the most
commonly used GPIO expander driver
- kernel-doc tweaks
Late fixes:
- use BYTE_CTRL_MODE for 2K2000/3000 models in gpio-loongson"
* tag 'gpio-updates-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (80 commits)
gpio: loongson: Switch 2K2000/3000 GPIO to BYTE_CTRL_MODE
gpio: regmap: fix kernel-doc notation
gpio: shared: fix a deadlock
gpio: shared-proxy: set suppress_bind_attrs
gpio: shared: ignore GPIO hogs when traversing the device tree
gpio: shared: ignore special __symbols__ node when traversing device tree
gpio: shared: handle the reset-gpios corner case
gpio: zynq: Use modern PM macros
gpio: xilinx: Use modern PM macros
gpio: xgene: Use modern PM macros
gpio: uniphier: Use modern PM macros
gpio: tqmx86: Use modern PM macros
gpio: pch: Use modern PM macros
gpio: omap: Use modern PM macros
gpio: msc313: Use modern PM macros
gpio: mlxbf2: Use modern PM macros
gpio: ml-ioh: Use modern PM macros
gpio: pl061: Use modern PM macros
gpio: htc-egpio: Use modern PM macros
gpio: brcmstb: Use modern PM macros
...
This release includes two changes for core functions, which affects all
use cases of this subsystem.
- Handle per-device interoperability quirks
It is well known that some devices have quirks affecting
interoperability. To identify such quirks at an early stages of
device detection, the step for reading the configuration ROM contents
has been changed. As a side effect, the entire detection process is
now performed at the basic transaction speed (S100), without no trial
to probe higher supported speeds.
With this change, the following devices should now work with fewer
issues:
- TASCAM FW-1884, FW-1804, and FW-1082
- MOTU Audio Express
- Safer removals of host card
There was a race condition between host card removal and handling of
bus reset events in the workqueue. This appears to be a long standing
issue (for a dozen years or so[1]), and recent changes to use more
workqueues escalate it. To solve it, a new callback has been added to
the 1394 OHCI PCI driver to unregister the interrupt sources and wait
for workqueue completions when removing a card instance.
[1] https://sourceforge.net/p/linux1394/mailman/linux1394-devel/thread/20250629024836.GA16759%40workstation.local/#msg59200628
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQE66IEYNDXNBPeGKSsLtaWM8LwEwUCaS4gGwAKCRCsLtaWM8Lw
E1EhAP48BItL1FUcn1oHGU019iHCE57vTOxPE89LXlinAe7GAAD/WUq77tQ84RUJ
gCuml3cWgRJuDqT6rksDQNNPOFbPbgI=
=B7Xh
-----END PGP SIGNATURE-----
Merge tag 'firewire-updates-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394
Pull firewire updates from Takashi Sakamoto:
"This includes two changes for core functions, which affects all use
cases of this subsystem:
- Handle per-device interoperability quirks
Some devices have quirks affecting interoperability. To identify
such quirks at an early stages of device detection, the step for
reading the configuration ROM contents has been changed. As a side
effect, the entire detection process is now performed at the basic
transaction speed (S100), without a trial to probe higher
supported speeds.
With this change, the following devices should now work with fewer
issues:
- TASCAM FW-1884, FW-1804, and FW-1082
- MOTU Audio Express
- Safer removals of host card
There was a race condition between host card removal and handling
of bus reset events in the workqueue. This appears to be a long
standing issue, and recent changes to use more workqueues escalate
it.
To solve it, a new callback has been added to the 1394 OHCI PCI
driver to unregister the interrupt sources and wait for workqueue
completions when removing a card instance"
* tag 'firewire-updates-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: abort pending transactions at card removal
firewire: core: add WQ_UNBOUND to alloc_workqueue users
firewire: core: clear sources of hardware interrupt at card removal
firewire: core: code refactoring to find and pop transaction entry
firewire: core: code refactoring to remove transaction entry
firewire: core: use cleanup function to release cached configuration ROM
ALSA: firewire-tascam: reserve resources for transferred isochronous packets at S400
firewire: core: handle device quirk of TASCAM FW-1884/FW-1804/FW-1082
firewire: core: determine transaction speed after detecting quirks
firewire: core: code refactoring to compute transaction speed
firewire: core: handle device quirk of MOTU Audio Express
firewire: core: detect device quirk when reading configuration ROM
* New drivers
- Driver for Apple Silicon SMC
- Driver for TSC1641 I2C power monitor
- Driver for MPS MP9945
- Driver for MAX17616
- Driver for MP2925 and MP2929
* Added support for new devices to existing drivers
- dell-smm: Add Dell G5 5505 to fan control whitelist
- aspeed-g6-pwm-tach: Support for AST2700
- asus-ec-sensors: Support for ROG STRIX X470-I GAMING,
ROG STRIX X870-F GAMING WIFI, ROG STRIX X870E-H GAMING WIFI7,
and Pro WS TRX50-SAGE WIFI
- k10temp: Support for AMD Steam Deck APU ID
- pmbus/isl68137: Support for raa229141
- aht10: Support for dht20
- adt7410: Support for ADT7422
- peci: Support for Intel Emerald Rapids
- nct6775: Support for ASUS ROG STRIX X870E-H GAMING WIFI7
- pmbus/max34440: Support for ADPM12200
- ntc-thermistor: Support for Murata ncp18wm474
* Infrastructure updates
- Utilize subsystem locking in various drivers
- ltc4282, ltc2947: Use the new energy64 attribute
* Bug fixes
- Various drivers: Fixes to avoid TOCTOU, mostly in macro functions
evaluating parameters multiple times, as well as missing locks
- max6697: Fix regmap leak on probe failure
- sy7636a: Fix regulator_enable resource leak on error path
- asus-ec-sensors: Correct Pro WS TRX50-SAGE WIFI entry
* Other changes and improvements
- w83781d, lm78: Drop REALLY_SLOW_IO
- Fix broken datasheet links in various drivers
* Various other minor fixes and improvements
-----BEGIN PGP SIGNATURE-----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=NviP
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Apple Silicon SMC
- TSC1641 I2C power monitor
- MPS MP9945
- MAX17616
- MP2925 and MP2929
Added support for new devices to existing drivers:
- dell-smm: Add Dell G5 5505 to fan control whitelist
- aspeed-g6-pwm-tach: Support for AST2700
- asus-ec-sensors: Support for ROG STRIX X470-I GAMING, ROG STRIX
X870-F GAMING WIFI, ROG STRIX X870E-H GAMING WIFI7, and Pro WS
TRX50-SAGE WIFI
- k10temp: Support for AMD Steam Deck APU ID
- pmbus/isl68137: Support for raa229141
- aht10: Support for dht20
- adt7410: Support for ADT7422
- peci: Support for Intel Emerald Rapids
- nct6775: Support for ASUS ROG STRIX X870E-H GAMING WIFI7
- pmbus/max34440: Support for ADPM12200
- ntc-thermistor: Support for Murata ncp18wm474
Infrastructure updates:
- Utilize subsystem locking in various drivers
- ltc4282, ltc2947: Use the new energy64 attribute
Bug fixes:
- Various drivers: Fixes to avoid TOCTOU, mostly in macro functions
evaluating parameters multiple times, as well as missing locks
- max6697: Fix regmap leak on probe failure
- sy7636a: Fix regulator_enable resource leak on error path
- asus-ec-sensors: Correct Pro WS TRX50-SAGE WIFI entry
Other changes and improvements:
- w83781d, lm78: Drop REALLY_SLOW_IO
- Fix broken datasheet links in various drivers
And various other minor fixes and improvements"
* tag 'hwmon-for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (110 commits)
hwmon: (dell-smm) Add Dell G5 5505 to fan control whitelist
hwmon: (max16065) Use local variable to avoid TOCTOU
hwmon: (w83l786ng) Convert macros to functions to avoid TOCTOU
hwmon: (max6697) fix regmap leak on probe failure
hwmon/w83781d: Drop REALLY_SLOW_IO setting
hwmon/lm78: Drop REALLY_SLOW_IO setting
hwmon: sy7636a: Fix regulator_enable resource leak on error path
hwmon: (adm1026) Convert macros to functions to avoid TOCTOU
hwmon: (adm1029) Add locking to avoid TOCTOU
hwmon: (lm87) Convert macros to functions to avoid TOCTOU
hwmon: (asus-ec-sensors) correct Pro WS TRX50-SAGE WIFI entry
hwmon: (vt8231) Convert macros to functions to avoid TOCTOU
hwmon: (emc2103) Add locking to avoid TOCTOU
hwmon: (aspeed-g6-pwm-tach): Add AST2700 compatible string
dt-bindings: hwmon: Add AST2700 compatible
hwmon: (asus-ec-sensors) add ROG STRIX X470-I GAMING
hwmon: (vt1211) Convert macros to functions to avoid TOCTOU
hwmon: (k10temp) Add AMD Steam Deck APU ID
hwmon: Add Apple Silicon SMC hwmon driver
Documentation/hwmon: Fix broken datasheet links for zl6100
...
The two newly added drivers fail to link on builds without
CONFIG_OF:
x86_64-linux-ld: drivers/pinctrl/pinctrl-pic64gx-gpio2.o: in function `pinconf_generic_dt_node_to_map_all':
pinctrl-pic64gx-gpio2.c:(.text+0xc9): undefined reference to `pinconf_generic_dt_node_to_map'
x86_64-linux-ld: drivers/pinctrl/pinctrl-mpfs-iomux0.o: in function `pinconf_generic_dt_node_to_map_all':
pinctrl-mpfs-iomux0.c:(.text+0xc9): undefined reference to `pinconf_generic_dt_node_to_map'
Add a Kconfig dependencies.
Fixes: 38cf9d6413 ("pinctrl: add pic64gx "gpio2" pinmux driver")
Fixes: 46397274da ("pinctrl: add polarfire soc iomux0 pinmux driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
This function doesn't return anything any more, so the compiler would
notice any bad error handling before any cocci script would.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20251202193129.1411419-3-briannorris@chromium.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
No callers check the return code, and that's a good thing. Doing so
would be racy and unhelpful.
Drop the return code entirely, so we don't make anyone think about its
complexities.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20251202193129.1411419-2-briannorris@chromium.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Apparently this test is the only code that checks the return code from
pm_runtime_barrier(), and it turns out that's for good reason -- it's
inherently racy, and a bad idea. We're going to make
pm_runtime_barrier() return void, so prepare for that by dropping any
return code checks.
This resolves some test failures seen like the following:
[ 34.559694] # pm_runtime_error_test: EXPECTATION FAILED at drivers/base/power/runtime-test.c:177
[ 34.559694] Expected 1 == pm_runtime_barrier(dev), but
[ 34.559694] pm_runtime_barrier(dev) == 0 (0x0)
[ 34.563604] # pm_runtime_error_test: pass:0 fail:1 skip:0 total:1
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/lkml/93259f2b-7017-4096-a31b-cabbf6152e9b@roeck-us.net/
Signed-off-by: Brian Norris <briannorris@chromium.org>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20251202193129.1411419-1-briannorris@chromium.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
