Some processors have no IOCSR.VENDOR and IOCSR.CPUNAME, some processors
have these registers but there is no valid information.
Consolidate CPU names in /proc/cpuinfo:
1. Add "PRID" to display the PRID & Core-Name;
2. Let "Model Name" display "Unknown" if no valid name.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The kernel UAPI headers already contain fixed-width integer types, there
is no need to rely on the libc types. There may not be a libc available
or the libc may not provides the <stdint.h>, like for example on nolibc.
This also aligns the header with the rest of the LoongArch UAPI headers.
Fixes: 803b0fc5c3 ("LoongArch: Add process management")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
T99W760 modem is based on Qualcomm SDX35 chipset. It uses the same channel
configurations of Foxconn SDX61 modem. Hence, add support for it by reusing
the 'modem_foxconn_sdx61_config' config structure.
The EDL firmware for this modem has been pushed to linux-firmware.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
[mani: reworded description]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20251119105615.48295-2-slark_xiao@163.com
Tariq Toukan says:
====================
net/mlx5: Move notifiers outside the devlink lock
This series by Cosmin moves blocking notifier registration in the mlx5
driver outside the devlink lock during probe.
This is mostly a no-op refactoring that consists of multiple pieces.
It is necessary because upcoming code will introduce a potential locking
cycle between the devlink lock and the blocking notifier head mutexes,
so these notifiers must move out of the devlink-locked critical section.
====================
Link: https://patch.msgid.link/1763325940-1231508-1-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This completes the previous patches by moving notifier registration for
SF dev tables outside the devlink locked critical section in
mlx5_init_one() / mlx5_uninit_one() and into the mlx5_mdev_init() /
mlx5_mdev_uninit() functions.
This is only done for non-SFs, since SFs do not have a SF HW table
themselves.
After this patch, notifiers can grab the PF devlink lock (soon to be
necessary) without creating a locking cycle.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1763325940-1231508-7-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the SF table notifiers registration/unregistration outside of
mlx5_init_one() / mlx5_uninit_one() and into the mlx5_mdev_init() /
mlx5_mdev_uninit() functions.
This is only done for non-SFs, since SFs do not have a SF table
themselves and thus don't need notifiers.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1763325940-1231508-6-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the SF HW table notifier registration/unregistration outside of
mlx5_init_one() / mlx5_uninit_one() and into the mlx5_mdev_init() /
mlx5_mdev_uninit() functions.
This is only done for non-SFs, since SFs do not have a SF HW table
themselves.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1763325940-1231508-5-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The vhca event notifier consists of an atomic notifier for vhca state
changes (used for SF events), multiple workqueues and a blocking
notifier chain for delivering the vhca state change events for further
processing.
This patch moves the vhca notifier head outside of mlx5_init_one() /
mlx5_uninit_one() and into the mlx5_mdev_init() / mlx5_mdev_uninit()
functions.
This allows called notifiers to grab the PF devlink lock which was
previously impossible because it would create a circular lock
dependency.
mlx5_vhca_event_stop() is now called earlier in the cleanup phase and
flushes the workqueues to ensure that after the call, there are no
pending events. This simplifies the cleanup flow for vhca event
consumers.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1763325940-1231508-4-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The esw mode change notifier chain is initialized/cleaned up in
mlx5_init_one() / mlx5_uninit_one() with the devlink lock held.
Move the notifier head from the eswitch struct into mlx5_priv directly,
and initialize it outside the critical section. This will allow notifier
registration to happen earlier in the init procedure in subsequent
patches.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1763325940-1231508-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move event init/cleanup outside of mlx5_init_one() / mlx5_uninit_one()
and into the mlx5_mdev_init() / mlx5_mdev_uninit() functions.
By doing this, we avoid the events being reinitialized on devlink reload
and, more importantly, the events->sw_nh notifier chain becomes
available earlier in the init procedure, which will be used in
subsequent patches. This makes sense because the events struct is pure
software, independent of any HW details.
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/1763325940-1231508-2-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After getting the current skb in napi_skb_cache_get(), the next skb in
cache is highly likely to be used soon, so prefetch would be helpful.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20251118070646.61344-5-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Replace NAPI_SKB_CACHE_HALF with NAPI_SKB_CACHE_FREE
- Only free 32 skbs in napi_skb_cache_put()
Since the first patch adjusting NAPI_SKB_CACHE_SIZE to 128, the number
of packets to be freed in the softirq was increased from 32 to 64.
Considering a subsequent net_rx_action() calling napi_poll() a few
times can easily consume the 64 available slots and we can afford
keeping a higher value of sk_buffs in per-cpu storage, decrease
NAPI_SKB_CACHE_FREE to 32 like before. So now the logic is 1) keeping
96 skbs, 2) freeing 32 skbs at one time.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20251118070646.61344-4-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous value 16 is a bit conservative, so adjust it along with
NAPI_SKB_CACHE_SIZE, which can minimize triggering memory allocation
in napi_skb_cache_get*().
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20251118070646.61344-3-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After commit b61785852e ("net: increase skb_defer_max default to 128")
changed the value sysctl_skb_defer_max to avoid many calls to
kick_defer_list_purge(), the same situation can be applied to
NAPI_SKB_CACHE_SIZE that was proposed in 2016. It's a trade-off between
using pre-allocated memory in skb_cache and saving more a bit heavy
function calls in the softirq context.
With this patch applied, we can have more skbs per-cpu to accelerate the
sending path that needs to acquire new skbs.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20251118070646.61344-2-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Vladimir Oltean says:
====================
Disable CLKOUT on RTL8211F(D)(I)-VD-CG
The Realtek RTL8211F(D)(I)-VD-CG is similar to other RTL8211F models in
that the CLKOUT signal can be turned off - a feature requested to reduce
EMI, and implemented via "realtek,clkout-disable" as documented in
Documentation/devicetree/bindings/net/realtek,rtl82xx.yaml.
It is also dissimilar to said PHY models because it has no PHYCR2
register, and disabling CLKOUT is done through some other register.
The strategy adopted in this 6-patch series is to make the PHY driver
not think in terms of "priv->has_phycr2" and "priv->phycr2", but of more
high-level features ("priv->disable_clk_out") while maintaining behaviour.
Then, the logic is extended for the new PHY.
Very loosely based on previous work from Clark Wang, who took a
different approach, to pretend that the RTL8211FVD_CLKOUT_REG is
actually this PHY's PHYCR2.
====================
Link: https://patch.msgid.link/20251117234033.345679-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To simplify the rtl8211f_config_init() control flow and get rid of
"early" returns for PHYs where the PHYCR2 register is absent, move the
entire logic sub-block that deals with disabling PHY-mode EEE to a
separate function. There, it is much more obvious what the early
"return 0" skips, and it becomes more difficult to accidentally skip
unintended stuff.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251117234033.345679-7-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Previous changes have replaced the machine-level priv->phycr2 with a
high-level priv->disable_clk_out. This created a discrepancy with
priv->phycr1 which is resolved here, for uniformity.
One advantage of this new implementation is that we don't read
priv->phycr1 in rtl821x_probe() if we're never going to modify it.
We never test the positive return code from phy_modify_mmd_changed(), so
we could just as well use phy_modify_mmd().
I took the ALDPS feature description from commit d90db36a9e ("net:
phy: realtek: add dt property to enable ALDPS mode") and transformed it
into a function comment - the feature is sufficiently non-obvious to
deserve that.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251117234033.345679-6-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add CLKOUT disable support for RTL8211F(D)(I)-VD-CG. Like with other PHY
variants, this feature might be requested by customers when the clock
output is not used, in order to reduce electromagnetic interference (EMI).
In the common driver, the CLKOUT configuration is done through PHYCR2.
The RTL_8211FVD_PHYID is singled out as not having that register, and
execution in rtl8211f_config_init() returns early after commit
2c67301584 ("net: phy: realtek: Avoid PHYCR2 access if PHYCR2 not
present").
But actually CLKOUT is configured through a different register for this
PHY. Instead of pretending this is PHYCR2 (which it is not), just add
some code for modifying this register inside the rtl8211f_disable_clk_out()
function, and move that outside the code portion that runs only if
PHYCR2 exists.
In practice this reorders the PHYCR2 writes to disable PHY-mode EEE and
to disable the CLKOUT for the normal RTL8211F variants, but this should
be perfectly fine.
It was not noted that RTL8211F(D)(I)-VD-CG would need a genphy_soft_reset()
call after disabling the CLKOUT. Despite that, we do it out of caution
and for symmetry with the other RTL8211F models.
Co-developed-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Clark Wang <xiaoning.wang@nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251117234033.345679-5-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This variable is assigned in rtl821x_probe() and used in
rtl8211f_config_init(), which is more complex than it needs to be.
Simply testing the same condition from rtl821x_probe() in
rtl8211f_config_init() yields the same result (the PHY driver ID is a
runtime invariant), but with one temporary variable less.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251117234033.345679-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The RTL8211F(D)(I)-VD-CG PHY also has support for disabling the CLKOUT,
and we'd like to introduce the "realtek,clkout-disable" property for
that.
But it isn't done through the PHYCR2 register, and it becomes awkward to
have the driver pretend that it is. So just replace the machine-level
"u16 phycr2" variable with a logical "bool disable_clk_out", which
scales better to the other PHY as well.
The change is a complete functional equivalent. Before, if the device
tree property was absent, priv->phycr2 would contain the RTL8211F_CLKOUT_EN
bit as read from hardware. Now, we don't save priv->phycr2, but we just
don't call phy_modify_paged() on it. Also, we can simply call
phy_modify_paged() with the "set" argument to 0.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251117234033.345679-3-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The control flow in rtl8211f_config_init() has some pitfalls which were
probably unintended. Specifically it has an early return:
switch (phydev->interface) {
...
default: /* the rest of the modes imply leaving delay as is. */
return 0;
}
which exits the entire config_init() function. This means it also skips
doing things such as disabling CLKOUT or disabling PHY-mode EEE.
For the RTL8211FS, which uses PHY_INTERFACE_MODE_SGMII, this might be a
problem. However, I don't know that it is, so there is no Fixes: tag.
The issue was observed through code inspection.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251117234033.345679-2-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert the vmxnet3 driver to use the new .get_rx_ring_count ethtool
operation instead of implementing .get_rxnfc solely for handling
ETHTOOL_GRXRINGS command. This simplifies the code by removing the
switch statement and replacing it with a direct return of the queue
count.
The new callback provides the same functionality in a more direct way,
following the ongoing ethtool API modernization.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20251118-vmxnet3_grxrings-v1-1-ed8abddd2d52@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Aditya Garg says:
====================
net: mana: Enforce TX SGE limit and fix error cleanup
Add pre-transmission checks to block SKBs that exceed the hardware's SGE
limit. Force software segmentation for GSO traffic and linearize non-GSO
packets as needed.
Update TX error handling to drop failed SKBs and unmap resources
immediately.
====================
Link: https://patch.msgid.link/1763464269-10431-1-git-send-email-gargaditya@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MANA hardware supports a maximum of 30 scatter-gather entries (SGEs)
per TX WQE. Exceeding this limit can cause TX failures.
Add ndo_features_check() callback to validate SKB layout before
transmission. For GSO SKBs that would exceed the hardware SGE limit, clear
NETIF_F_GSO_MASK to enforce software segmentation in the stack.
Add a fallback in mana_start_xmit() to linearize non-GSO SKBs that still
exceed the SGE limit.
Also, Add ethtool counter for SKBs linearized
Co-developed-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Signed-off-by: Dipayaan Roy <dipayanroy@linux.microsoft.com>
Signed-off-by: Aditya Garg <gargaditya@linux.microsoft.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://patch.msgid.link/1763464269-10431-2-git-send-email-gargaditya@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2025-11-18 (idpf, ice)
This series contains updates to idpf and ice drivers.
Emil adds a check for NULL vport_config during removal to avoid NULL
pointer dereference in idpf.
Grzegorz fixes PTP teardown paths to account for some missed cleanups
for ice driver.
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: fix PTP cleanup on driver removal in error path
idpf: fix possible vport_config NULL pointer deref in remove
====================
Link: https://patch.msgid.link/20251118235207.2165495-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: misc fixes for v6.18-rc7
Here are various unrelated fixes:
- Patch 1: Fix window space computation for fallback connections which
can affect ACK generation. A fix for v5.11.
- Patch 2: Avoid unneeded subflow-level drops due to unsynced received
window. A fix for v5.11.
- Patch 3: Avoid premature close for fallback connections with PREEMPT
kernels. A fix for v5.12.
- Patch 4: Reset instead of fallback in case of data in the MPTCP
out-of-order queue. A fix for v5.7.
- Patches 5-7: Avoid also sending "plain" TCP reset when closing with an
MP_FASTCLOSE. A fix for v6.1.
- Patches 8-9: Longer timeout for background connections in MPTCP Join
selftests. An additional fix for recent patches for v5.13/v6.1.
- Patches 10-11: Fix typo in a check introduce in a recent refactoring.
A fix for v6.15.
====================
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-0-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The previous patch fixed an issue with the 'add_addr_accepted' counter.
This was not spot by the test suite.
Check this counter and 'add_addr_signal' in MPTCP Join 'delete re-add
signal' test. This should help spotting similar regressions later on.
These counters are crucial for ensuring the MPTCP path manager correctly
handles the subflow creation via 'ADD_ADDR'.
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-11-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix inverted WARN_ON_ONCE condition that prevented normal address
removal counter updates. The current code only executes decrement
logic when the counter is already 0 (abnormal state), while
normal removals (counter > 0) are ignored.
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Fixes: 6361139185 ("mptcp: pm: remove '_nl' from mptcp_pm_nl_rm_addr_received")
Cc: stable@vger.kernel.org
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-10-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In rare cases, when the test environment is very slow, some userspace
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to have a longer
timeout, and even go over the default one. This connection will be
killed at the end, after the verifications: increasing the timeout
doesn't change anything, apart from avoiding it to end before the end of
the verifications.
To play it safe, all userspace tests not waiting for the end of the
transfer are now having a longer timeout: 2 minutes.
The Fixes commit was making the connection longer, but still, the
default timeout would have stopped it after 1 minute, which might not be
enough in very slow environments.
Fixes: 290493078b ("selftests: mptcp: join: userspace: longer transfer")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-9-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In rare cases, when the test environment is very slow, some endpoints
tests can fail because some expected events have not been seen.
Because the tests are expecting a long on-going connection, and they are
not waiting for the end of the transfer, it is fine to have a longer
timeout, and even go over the default one. This connection will be
killed at the end, after the verifications: increasing the timeout
doesn't change anything, apart from avoiding it to end before the end of
the verifications.
To play it safe, all endpoints tests not waiting for the end of the
transfer are now having a longer timeout: 2 minutes.
The Fixes commit was making the connection longer, but still, the
default timeout would have stopped it after 1 minute, which might not be
enough in very slow environments.
Fixes: 6457595db9 ("selftests: mptcp: join: endpoints: longer transfer")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-8-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After recent fixes like the parent commit, and "selftests: mptcp:
connect: trunc: read all recv data", the two fastclose subtests no
longer look flaky any more.
It then feels fine to remove these flaky marks, to no longer ignore
these subtests in case of errors.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-7-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The CI reports sporadic failures of the fastclose self-tests. The root
cause is a duplicate reset, not carrying the relevant MPTCP option.
In the failing scenario the bad reset is received by the peer before
the fastclose one, preventing the reception of the latter.
Indeed there is window of opportunity at fastclose time for the
following race:
mptcp_do_fastclose
__mptcp_close_ssk
__tcp_close()
tcp_set_state() [1]
tcp_send_active_reset() [2]
After [1] the stack will send reset to in-flight data reaching the now
closed port. Such reset may race with [2].
Address the issue explicitly sending a single reset on fastclose before
explicitly moving the subflow to close status.
Fixes: d21f834855 ("mptcp: use fastclose on more edge scenarios")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/596
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-6-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
With the current fastclose implementation, the mptcp_do_fastclose()
helper is in charge of two distinct actions: send the fastclose reset
and cleanup the subflows.
Formally decouple the two steps, ensuring that mptcp explicitly closes
all the subflows after the mentioned helper.
This will make the upcoming fix simpler, and allows dropping the 2nd
argument from mptcp_destroy_common(). The Fixes tag is then the same as
in the next commit to help with the backports.
Fixes: d21f834855 ("mptcp: use fastclose on more edge scenarios")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-5-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case of DSS corruption, the MPTCP protocol tries to avoid the subflow
reset if fallback is possible. Such corruptions happen in the receive
path; to ensure fallback is possible the stack additionally needs to
check for OoO data, otherwise the fallback will break the data stream.
Fixes: e32d262c89 ("mptcp: handle consistently DSS corruption")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/598
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-4-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I'm observing very frequent self-tests failures in case of fallback when
running on a CONFIG_PREEMPT kernel.
The root cause is that subflow_sched_work_if_closed() closes any subflow
as soon as it is half-closed and has no incoming data pending.
That works well for regular subflows - MPTCP needs bi-directional
connectivity to operate on a given subflow - but for fallback socket is
race prone.
When TCP peer closes the connection before the MPTCP one,
subflow_sched_work_if_closed() will schedule the MPTCP worker to
gracefully close the subflow, and shortly after will do another schedule
to inject and process a dummy incoming DATA_FIN.
On CONFIG_PREEMPT kernel, the MPTCP worker can kick-in and close the
fallback subflow before subflow_sched_work_if_closed() is able to create
the dummy DATA_FIN, unexpectedly interrupting the transfer.
Address the issue explicitly avoiding closing fallback subflows on when
the peer is only half-closed.
Note that, when the subflow is able to create the DATA_FIN before the
worker invocation, the worker will change the msk state before trying to
close the subflow and will skip the latter operation as the msk will not
match anymore the precondition in __mptcp_close_subflow().
Fixes: f09b0ad55a ("mptcp: close subflow when receiving TCP+FIN")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-3-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The rcv window is shared among all the subflows. Currently, MPTCP sync
the TCP-level rcv window with the MPTCP one at tcp_transmit_skb() time.
The above means that incoming data may sporadically observe outdated
TCP-level rcv window and being wrongly dropped by TCP.
Address the issue checking for the edge condition before queuing the
data at TCP level, and eventually syncing the rcv window as needed.
Note that the issue is actually present from the very first MPTCP
implementation, but backports older than the blamed commit below will
range from impossible to useless.
Before:
$ nstat -n; sleep 1; nstat -z TcpExtBeyondWindow
TcpExtBeyondWindow 14 0.0
After:
$ nstat -n; sleep 1; nstat -z TcpExtBeyondWindow
TcpExtBeyondWindow 0 0.0
Fixes: fa3fe2b150 ("mptcp: track window announced to peer")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-2-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mptcp_cleanup_rbuf() needs to know the last most recent, mptcp-level
rcv_wnd sent, and such information is tracked into the msk->old_wspace
field, updated at ack transmission time by mptcp_write_options().
Fallback socket do not add any mptcp options, such helper is never
invoked, and msk->old_wspace value remain stale. That in turn makes
ack generation at recvmsg() time quite random.
Address the issue ensuring mptcp_write_options() is invoked even for
fallback sockets, and just update the needed info in such a case.
The issue went unnoticed for a long time, as mptcp currently overshots
the fallback socket receive buffer autotune significantly. It is going
to change in the near future.
Fixes: e3859603ba ("mptcp: better msk receive window updates")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/594
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251118-net-mptcp-misc-fixes-6-18-rc6-v1-1-806d3781c95f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, the TM tree is printing all SQ topology including those
which are not enabled, this results in redundant output for SQs
which are not active. This patch adds a check in print_tm_tree()
to skip printing the TM tree hierarchy if the SQ is not enabled.
Signed-off-by: Anshumali Gaur <agaur@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251118054235.1599714-1-agaur@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make sure that the linux-scsi mailing list is Cc-ed for changes to UFS
include headers.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251119165742.536170-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Allow user space software, e.g. a blktests test, to inject unaligned
write errors.
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251113174151.1095574-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In qla2xxx_process_purls_iocb(), an item is allocated via
qla27xx_copy_multiple_pkt(), which internally calls
qla24xx_alloc_purex_item().
The qla24xx_alloc_purex_item() function may return a pre-allocated item
from a per-adapter pool for small allocations, instead of dynamically
allocating memory with kzalloc().
An error handling path in qla2xxx_process_purls_iocb() incorrectly uses
kfree() to release the item. If the item was from the pre-allocated
pool, calling kfree() on it is a bug that can lead to memory corruption.
Fix this by using the correct deallocation function,
qla24xx_free_purex_item(), which properly handles both dynamically
allocated and pre-allocated items.
Fixes: 875386b988 ("scsi: qla2xxx: Add Unsolicited LS Request and Response Support for NVMe")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Himanshu Madhani <hmadhani2024@gmail.com>
Link: https://patch.msgid.link/20251113151246.762510-1-zilin@seu.edu.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Scanning can be offloaded to the firmware. To that end, the driver
prepares a list of channels to scan, including periodic visits back to
the operating channel, and sends the list to the firmware.
When the channel list is too long to fit in a single H2C message, the
driver splits the list, sends the first part, and tells the firmware to
scan. When the scan is complete, the driver sends the next part of the
list and tells the firmware to scan.
When the last channel that fit in the H2C message is the operating
channel something seems to go wrong in the firmware. It will
acknowledge receiving the list of channels but apparently it will not
do anything more. The AP can't be pinged anymore. The driver still
receives beacons, though.
One way to avoid this is to split the list of channels before the
operating channel.
Affected devices:
* RTL8851BU with firmware 0.29.41.3
* RTL8832BU with firmware 0.29.29.8
* RTL8852BE with firmware 0.29.29.8
The commit 57a5fbe39a ("wifi: rtw89: refactor flow that hw scan handles channel list")
is found by git blame, but it is actually to refine the scan flow, but not
a culprit, so skip Fixes tag.
Reported-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Closes: https://lore.kernel.org/linux-wireless/0abbda91-c5c2-4007-84c8-215679e652e1@gmail.com/
Cc: stable@vger.kernel.org # 6.16+
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/c1e61744-8db4-4646-867f-241b47d30386@gmail.com
drivers/ufs/host/ufs-rockchip.c:168:19: error: implicit declaration of function
'devm_gpiod_get'; did you mean 'em_pd_get'? [-Werror=implicit-function-declaration]
drivers/ufs/host/ufs-rockchip.c:214:2: error: implicit declaration of function
'gpiod_set_value_cansleep'; did you mean 'gpio_set_value_cansleep'?
[-Werror=implicit-function-declaration]
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511130238.LlA0MKxW-lkp@intel.com/
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/1763011091-243727-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This fixes the dme-reset failed when doing recovery. Because device
reset is not enough, we could occasionally see the error below:
ufshcd-rockchip 2a2d0000.ufs: uic cmd 0x14 with arg3 0x0 completion timeout
ufshcd-rockchip 2a2d0000.ufs: dme-reset: error code -110
ufshcd-rockchip 2a2d0000.ufs: DME_RESET failed
ufshcd-rockchip 2a2d0000.ufs: ufshcd_host_reset_and_restore: Host init failed -110
Fix this by resetting the controller on PRE_CHANGE stage of hce enable
notify.
Fixes: d3cbe455d6 ("scsi: ufs: rockchip: Initial support for UFS")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Link: https://patch.msgid.link/1763009575-237552-1-git-send-email-shawn.lin@rock-chips.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Different SoCs have different numbers of Wireless Ethernet
Dispatch (WED) units:
- MT7981: Has 1 WED unit
- MT7986: Has 2 WED units
- MT7988: Has 2 WED units
Update the binding to reflect these hardware differences. The MT7981
also uses infracfg for PHY switching, so allow that property.
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251115-openwrt-one-network-v4-6-48cbda2969ac@collabora.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>