Currently if a user enqueues a work item using schedule_delayed_work()
the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND. This lack of consistency cannot be addressed
without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251107151618.281250-1-marco.crivellari@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently if a user enqueues a work item using schedule_delayed_work()
the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND. This lack of consistency cannot be addressed
without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251107150542.271229-1-marco.crivellari@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently if a user enqueues a work item using schedule_delayed_work()
the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND. This lack of consistency cannot be addressed
without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251107150155.267651-3-marco.crivellari@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently if a user enqueues a work item using schedule_delayed_work()
the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND. This lack of consistency cannot be addressed
without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251107150155.267651-2-marco.crivellari@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently if a user enqueues a work item using schedule_delayed_work()
the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND. This lack of consistency cannot be addressed
without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251107144949.256894-1-marco.crivellari@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently if a user enqueues a work item using schedule_delayed_work()
the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND. This lack of consistency cannot be addressed
without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251107141458.225119-1-marco.crivellari@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently if a user enqueue a work item using schedule_delayed_work()
the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND. This lack of consistentcy cannot be
addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
This patch continues the effort to refactor worqueue APIs, which has
begun with the change introducing new workqueues and a new
alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20251104110808.123424-1-marco.crivellari@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Reviewed-by: Justin Tee <justin.tee@broadcom.com>
Link: https://patch.msgid.link/20251031095643.74246-5-marco.crivellari@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251031095643.74246-4-marco.crivellari@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251031095643.74246-3-marco.crivellari@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently if a user enqueue a work item using schedule_delayed_work()
the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the
API.
This patch continues the effort to refactor worqueue APIs, which has
begun with the change introducing new workqueues and a new
alloc_workqueue flag:
commit 128ea9f6cc ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566 ("workqueue: Add new WQ_PERCPU flag")
system_dfl_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
The old system_unbound_wq will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251104104518.102130-1-marco.crivellari@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-----BEGIN PGP SIGNATURE-----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=i1Nm
-----END PGP SIGNATURE-----
Merge tag 'loongarch-fixes-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
- Fix a Rust build error
- Fix exception/interrupt, memory management, perf event, hardware
breakpoint, kexec and KVM bugs
* tag 'loongarch-fixes-6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Fix max supported vCPUs set with EIOINTC
LoongArch: KVM: Skip PMU checking on vCPU context switch
LoongArch: KVM: Restore guest PMU if it is enabled
LoongArch: KVM: Add delay until timer interrupt injected
LoongArch: KVM: Set page with write attribute if dirty track disabled
LoongArch: kexec: Print out debugging message if required
LoongArch: kexec: Initialize the kexec_buf structure
LoongArch: Use correct accessor to read FWPC/MWPC
LoongArch: Refine the init_hw_perf_events() function
LoongArch: Remove __GFP_HIGHMEM masking in pud_alloc_one()
LoongArch: Let {pte,pmd}_modify() record the status of _PAGE_DIRTY
LoongArch: Consolidate max_pfn & max_low_pfn calculation
LoongArch: Consolidate early_ioremap()/ioremap_prot()
LoongArch: Use physical addresses for CSR_MERRENTRY/CSR_TLBRENTRY
LoongArch: Clarify 3 MSG interrupt features
rust: Add -fno-isolate-erroneous-paths-dereference to bindgen_skip_c_flags
Add Magnus as a maintainer of the alpha port.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iNUEABYKAH0WIQReryEEmoa4pUzLG/qs6yl0DJpOlwUCaRPq318UgAAAAAAuAChp
c3N1ZXItZnByQG5vdGF0aW9ucy5vcGVucGdwLmZpZnRoaG9yc2VtYW4ubmV0NUVB
RjIxMDQ5QTg2QjhBNTRDQ0IxQkZBQUNFQjI5NzQwQzlBNEU5NwAKCRCs6yl0DJpO
l2ixAQDwl+7FbCK6YuE7rwV1zFzH5vFPHUr/9L07aJydg1L8BwD/VjJxRKIQYcid
AP8Llk4OvzfDj16TD+dlhHkRBgaJUAA=
=KfTN
-----END PGP SIGNATURE-----
Merge tag 'alpha-fixes-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha
Pull alpha fix from Matt Turner:
"Add Magnus as a maintainer of the alpha port"
* tag 'alpha-fixes-v6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
MAINTAINERS: Add Magnus Lindholm as maintainer for alpha port
Currently if a user enqueue a work item using schedule_delayed_work()
the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the
API.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be
used.
The old system_unbound_wq will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251031095643.74246-2-marco.crivellari@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently if a user enqueue a work item using schedule_delayed_work()
the used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the
API.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be
used.
The old system_unbound_wq will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20251031095643.74246-2-marco.crivellari@suse.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Russell King says:
====================
net: stmmac: convert glue drivers to use stmmac_get_phy_intf_sel()
This series converts the remaining glue drivers that support
multi-interface to use stmmac_get_phy_intf_sel(). The reason these
drivers are not converted to the set_phy_intf_sel() method is
because it is unclear whether there are ordering dependencies that
would prevent it.
For example, reading the stm32mp2 documentation, it is required to
set the ETH1_SEL field while the dwmac core is in reset and before
clocks are enabled. This requirement can not be satsified at the
moment (but could with further changes.)
====================
Link: https://patch.msgid.link/aRLvrfx6tOa-RhrY@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use stmmac_get_phy_intf_sel() to decode the PHY interface mode to the
phy_intf_sel value, validate the result and use that to set the
control register to select the operating mode for the DWMAC core.
Note that this will allow GMII as well as MII as the phy_intf_sel
value is the same for both.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vIjUe-0000000DquB-3JDY@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert dwmac-visconti to use the PHY_INTF_SEL_x definitions. The
original definitions used constant 0, BIT(0) (==1) and BIT(2) (==4)
to define these, but the values of the bits corresponds with the
PHY_INTF_SEL_x values, so it is highly likely that these are not
individual bits, but the PHY_INTF_SEL_x bitfield.
This removes this incorrect use of BIT().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vIjUZ-0000000Dqu5-2sDI@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use stmmac_get_phy_intf_sel() to decode the PHY interface mode to the
phy_intf_sel value. As both configure functions would end up with the
same code, call this from stm32mp1_set_mode(), validate the result and
pass the resulting value into the stm32 configure function. Use this
value to set the operating mode for the DWMAC core.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vIjUU-0000000Dqtz-2PwT@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rather than defining separate constants for each, use the
PHY_INTF_SEL_x definitions in the switch()es configuring the
control register, and use one FIELD_PREP() to convert phy_intf_sel
to the register value.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vIjUP-0000000Dqtt-1bYn@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert dwmac-stm32 to use the PHY_INTF_SEL_x definitions.
For stm32mp1, the original definitions used constant 0 (GMII, 0 << 21),
BIT(21) (RGMII, 1 << 21) and BIT(23) (RMII, 4 << 21) to define these,
but from the values it can be clearly seen that these are the
PHY_INTF_SEL_x inputs to the dwmac.
For stm32mp2, the original definitions cover a bitfield 6:4 in the
SYSCFG Ethernet1 control register (according to documentation) and use
the PHY_INTF_SEL_x values.
Use the common dwmac definitions for the PHY interface selection field
by adding the bitfield mask, and using FIELD_PREP() for the bitfield
values.
This removes this incorrect use of BIT().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1vIjUK-0000000Dqtn-1AyK@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use stmmac_get_phy_intf_sel() to decode the PHY interface mode to the
phy_intf_sel value, validate the result and use that to set the
control register to select the operating mode for the DWMAC core.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://patch.msgid.link/E1vIjUF-0000000Dqth-0gwD@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the common dwmac definitions for the PHY interface selection field.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://patch.msgid.link/E1vIjUA-0000000Dqtb-0AfP@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the phy_intf_sel field value when deciding what other options to
apply for the configuration register.
Note that this will allow GMII as well as MII as the phy_intf_sel
value is the same for both.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vIjU4-0000000DqtV-3qsX@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use stmmac_get_phy_intf_sel() to decode the PHY interface mode to the
phy_intf_sel value, validate the result, and pass that into the
implementation specific ->dwmac_set_phy_interface() method. Use this
to configure the PHY interface selection field.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vIjTz-0000000DqtP-3N9v@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use PHY_INTF_SEL_x definitions for the fields that correspond to the
phy_intf_sel inputs to the dwmac core.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vIjTu-0000000DqtI-2sUB@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use stmmac_get_phy_intf_sel() to decode the PHY interface mode to the
phy_intf_sel value, validate the result and use that to set the
control register to select the operating mode for the DWMAC core.
Note that this will allow GMII as well as MII as the phy_intf_sel
value is the same for both.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vIjTp-0000000DqtC-2DmI@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the PHY_INTF_SEL_xx values directly in ls1c_dwmac_syscon_init(),
converting them to the PHY_INTF_SELI bitfield when calling
regmap_update_bits().
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/E1vIjTk-0000000Dqt6-1gN9@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use PHY_INTF_SEL_x definitions for phy_intf_sel bitfield.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Uninitialized pointers with '__free' attribute can cause undefined
behaviour as the memory assigned(randomly) to the pointer is freed
automatically when the pointer goes out of scope
scsi doesn't have any bugs related to this as of now, but it is better
to initialize and assign pointers with '__free' attr in one statement to
ensure proper scope-based cleanup
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/aPiG_F5EBQUjZqsl@stanley.mountain/
Signed-off-by: Ally Heev <allyheev@gmail.com>
Link: https://patch.msgid.link/20251105-aheev-uninitialized-free-attr-scsi-v1-1-d28435a0a7ea@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For NICs with a large (1024+) number of queues, this test can cause
excessive memory fragmentation. This results in OOM errors, and in the
worst case driver/kernel crashes. We don't need to test with the max number
of queues, just enough to create a high likelihood of races between
reconfiguration and stats getting read.
Signed-off-by: Dimitri Daskalakis <dimitri.daskalakis1@gmail.com>
Link: https://patch.msgid.link/20251111225319.3019542-1-dimitri.daskalakis1@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The !payload check tests the address of a member of a data structure. We
know that the start address of this data structure (job) is not NULL
since the 'job' pointer has already been dereferenced. Hence, the
!payload check is superfluous. Remove this test. This was reported by
the CodeSonar static analyzer.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20251111184802.125111-1-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There's no need to explicitly call pm_runtime_mark_last_busy() since
pm_runtime_autosuspend() is now doing it since commit 08071e64cb ("PM:
runtime: Mark last busy stamp in pm_runtime_autosuspend()")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20251111-scsi-pm-improv-v2-1-626b8491f4b4@analog.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The driver calls ioport_map() to map I/O ports in sim710_probe_common()
but never calls ioport_unmap() to release the mapping. This causes
resource leaks in both the error path when request_irq() fails and in
the normal device removal path via sim710_device_remove().
Add ioport_unmap() calls in the out_release error path and in
sim710_device_remove().
Fixes: 56fece2008 ("[PATCH] finally fix 53c700 to use the generic iomem infrastructure")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251029032555.1476-1-vulab@iscas.ac.cn
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The asd_pci_remove() function fails to synchronize with pending tasklets
before freeing the asd_ha structure, leading to a potential
use-after-free vulnerability.
When a device removal is triggered (via hot-unplug or module unload),
race condition can occur.
The fix adds tasklet_kill() before freeing the asd_ha structure,
ensuring all scheduled tasklets complete before cleanup proceeds.
Reported-by: Yuhao Jiang <danisjiang@gmail.com>
Reported-by: Junrui Luo <moonafterrain@outlook.com>
Fixes: 2908d778ab ("[SCSI] aic94xx: new driver")
Cc: stable@vger.kernel.org
Signed-off-by: Junrui Luo <moonafterrain@outlook.com>
Link: https://patch.msgid.link/ME2PR01MB3156AB7DCACA206C845FC7E8AFFDA@ME2PR01MB3156.ausprd01.prod.outlook.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add the USB device ID 0x0b05:0x1cb6 to the rtw8852bu driver to support the
ASUS AX57 Nano WiFi 6 USB adapter.This device uses the same Realtek
RTL8852BU chipset as other supported models.
Tested on: Linux Mint 22 with kernel 6.8.0-87-generic.
The adapter initializes successfully and connects to networks.
Signed-off-by: Dan Hamik <dan@hamik.net>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/010f019a76e1a84b-0a6f5e9f-2a43-4a9d-9c30-de4ae6363011-000000@us-east-2.amazonses.com
To be able to capture and inject packets in monitor mode, do RF calibration
once setting certain channel. Since calibration costs time, do not change
behavior of normal usage, which do calibration only when starting as AP
or going to connect AP.
Since driver declares IEEE80211_HW_WANT_MONITOR_VIF, the pure monitor vif
must be only one when adding interface with type NL80211_IFTYPE_MONITOR.
Otherwise, monitor vif must be NULL.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251111022452.28093-8-pkshih@realtek.com
To send injected packets with configurable rate/bandwidth/GI, fill TXWD
fields according to SKB's info->control.rates[0] annotated by mac80211.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251111022452.28093-7-pkshih@realtek.com
Coverity reported a potential out-of-bounds access when 'bw' exceeds the
valid range for the specified band. Add a helper `rtw89_bw_is_valid()`
to check bandwidth validity for each band before accessing limit tables.
Addresses-Coverity-ID: 1598844 ("Out-of-bounds access")
Addresses-Coverity-ID: 1598896 ("Out-of-bounds access")
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251111022452.28093-6-pkshih@realtek.com
The rules to diagnose MAC have a common header, and a cmd field is used
to know the exact command and its format. The rules with the same tuple of
fields {sheet, seq} can be seen as a set of compound rules, which treat
it as positive rule if just one of the rules is positive.
Take EQUALV rules as example, if value of {addr, mask} is equal to
predefined value as field val, a rule is positive. Fields addr_name_offset
and msg_offset are offsets related to textual messages for human readable.
Format of common rule header (8 bytes)
+-------+-----+--------+-----------+-----+---------+
| sheet | cmd | seq[2] | io / band | len | rsvd[2] |
+-------+-----+--------+-----------+-----+---------+
Format of rule command is EQUALV (equal value) (24 bytes):
+------+------------------+------+-----+------------+---------+
| addr | addr_name_offset | mask | val | msg_offset | rsvd[4] |
+------+------------------+------+-----+------------+---------+
Format of message:
+-----+----------+
| len | string[] |
+-----+----------+
An example of output:
Plain(Ignore)/Rules/Positive: 115(4)/86/81
Where, Plain is total rules written in firmware element.
Ignore is the ignored rules, such as USB IO, but current is PCIE.
Rules is number of set of compound rules.
Positive is number of positive Rules.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251111022452.28093-4-pkshih@realtek.com
The firmware element ID 28 is a set of rules to diagnose if MAC get
abnormal. The latter patch will use these rules via debugfs to know
the status.
The element contains rules with their textual messages shown as below:
+------------------------------------+
| |
| +-----------+ |
| | rule_size |-------|----------+
+----------------+-----------+-------+ -- |
| rule[0] | \ |
| rule[1] | | <---+
| : | /
+------------------------------------+ --
| msg[0] msg[1] | each msg has variable length
| msg[2] msg[3] ... | (with address align 2)
| ... |
+------------------------------------+
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251111022452.28093-3-pkshih@realtek.com
Normally only access PCI device in pci.c. However for debug purpose,
a set of registers predefined in firmware element including PCI
configuration space should be read for diagnosis.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20251111022452.28093-2-pkshih@realtek.com
Christian reported that f3ac2ff148 ("PCI/ASPM: Enable all ClockPM and
ASPM states for devicetree platforms") broke booting on the A-EON AmigaOne
X1000.
Override the L0s and L1 Support advertised in Link Capabilities by the
X1000 Root Ports ([1959:a002]) so we don't try to enable those states.
Fixes: f3ac2ff148 ("PCI/ASPM: Enable all ClockPM and ASPM states for devicetree platforms")
Fixes: df5192d9bb ("PCI/ASPM: Enable only L0s and L1 for devicetree platforms")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Link: https://lore.kernel.org/r/a41d2ca1-fcd9-c416-b111-a958e92e94bf@xenosoft.de
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Christian reported that f3ac2ff148 ("PCI/ASPM: Enable all ClockPM and
ASPM states for devicetree platforms") broke booting on the A-EON X5000.
Override the L0s and L1 Support advertised in Link Capabilities by the
X5000 Root Ports ([1957:0451]) so we don't try to enable those states.
Fixes: f3ac2ff148 ("PCI/ASPM: Enable all ClockPM and ASPM states for devicetree platforms")
Fixes: df5192d9bb ("PCI/ASPM: Enable only L0s and L1 for devicetree platforms")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Link: https://lore.kernel.org/r/db5c95a1-cf3e-46f9-8045-a1b04908051a@xenosoft.de
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Link: https://patch.msgid.link/20251110222929.2140564-5-helgaas@kernel.org
Existing quirks to disable ASPM L0s and L1 use pci_disable_link_state(),
which disables ASPM states and prevents their use in the future. But since
they are FINAL quirks, they happen after ASPM has already been enabled.
Here's a typical call path:
pci_host_probe
pci_scan_root_bus_bridge
pci_scan_child_bus
pci_scan_slot
pci_scan_single_device
pci_device_add
pci_fixup_device(pci_fixup_header) # HEADER quirks
pcie_aspm_init_link_state
pcie_config_aspm_path
pcie_config_aspm_link
pcie_config_aspm_dev # ASPM may be enabled
pci_bus_add_devices
pci_bus_add_devices
pci_fixup_device(pci_fixup_final) # FINAL quirks
quirk_disable_aspm_l0s
pci_disable_link_state(dev, PCIE_LINK_STATE_L0S)
Sometimes enabling ASPM can make the link non-functional, so if we know
ASPM is broken on a device, we shouldn't enable it at all, even
temporarily.
Convert the existing quirks to use pcie_aspm_remove_cap() instead, which
overrides the ASPM Support advertised in PCIe Link Capabilities, and make
them HEADER quirks so they run before pcie_aspm_init_link_state() has a
chance to enable ASPM.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Link: https://patch.msgid.link/20251110222929.2140564-4-helgaas@kernel.org
Add pcie_aspm_remove_cap(). A quirk can use this to prevent use of ASPM
L0s or L1 link states, even if the device advertised support for them.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Link: https://patch.msgid.link/20251110222929.2140564-3-helgaas@kernel.org
Defective devices sometimes advertise support for ASPM L0s or L1 states
even if they don't work correctly.
Cache the L0s Supported and L1 Supported bits early in enumeration so
HEADER quirks can override the ASPM states advertised in Link Capabilities
before pcie_aspm_cap_init() enables ASPM.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Link: https://patch.msgid.link/20251110222929.2140564-2-helgaas@kernel.org