Christian Brauner <brauner@kernel.org> says:
Cleanup the namespace headers by splitting them into types and helpers.
Better separate common namepace types and functions from namespace tree
types and functions.
Fix the reference counts of initial namespaces so we don't do any
pointless cacheline ping-pong for them when we know they can never go
away. Add a bunch of asserts for both the passive and active reference
counts to catch any changes that would break it.
* patches from https://patch.msgid.link/20251110-work-namespace-nstree-fixes-v1-0-e8a9264e0fb9@kernel.org:
selftests/namespaces: fix nsid tests
ns: drop custom reference count initialization for initial namespaces
pid: rely on common reference count behavior
ns: add asserts for initial namespace active reference counts
ns: add asserts for initial namespace reference counts
ns: make all reference counts on initial namespace a nop
ipc: enable is_ns_init_id() assertions
fs: use boolean to indicate anonymous mount namespace
ns: rename is_initial_namespace()
ns: make is_initial_namespace() argument const
nstree: use guards for ns_tree_lock
nstree: simplify owner list iteration
nstree: switch to new structures
nstree: add helper to operate on struct ns_tree_{node,root}
nstree: move nstree types into separate header
nstree: decouple from ns_common header
ns: move namespace types into separate header
Link: https://patch.msgid.link/20251110-work-namespace-nstree-fixes-v1-0-e8a9264e0fb9@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stop playing games with the namespace id and use a boolean instead:
* This will remove the special-casing we need to do everywhere for mount
namespaces.
* It will allow us to use asserts on the namespace id for initial
namespaces everywhere.
* It will allow us to put anonymous mount namespaces on the namespaces
trees in the future and thus make them available to statmount() and
listmount().
Link: https://patch.msgid.link/20251110-work-namespace-nstree-fixes-v1-10-e8a9264e0fb9@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Bring in the shared branch with the kbuild tree to enable
'-fms-extensions' for 6.19. Further namespace cleanup work
requires this extension.
Signed-off-by: Christian Brauner <brauner@kernel.org>
Commit da30705c46 ("arch/powerpc: Remove .interp section in vmlinux")
intended to drop the .interp section from vmlinux but even with this
change, relocatable kernels linked with ld.lld contain an empty .interp
section, which ends up causing crashes in GDB [1].
$ make -skj"$(nproc)" ARCH=powerpc LLVM=1 clean pseries_le_defconfig vmlinux
$ llvm-readelf -S vmlinux | grep interp
[44] .interp PROGBITS c0000000021ddb34 21edb34 000000 00 A 0 0 1
There appears to be a subtle difference between GNU ld and ld.lld when
it comes to discarding sections that specify load addresses [2].
Since '--no-dynamic-linker' prevents emission of the .interp section,
there is no need to describe it in the output sections of the vmlinux
linker script. Drop the .interp section description from vmlinux.lds.S
to avoid this issue altogether.
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=33481 [1]
Link: https://github.com/ClangBuiltLinux/linux/issues/2137 [2]
Reported-by: Vishal Chourasia <vishalc@linux.ibm.com>
Closes: https://lore.kernel.org/20251013040148.560439-1-vishalc@linux.ibm.com/
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Vishal Chourasia <vishalc@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20251018-ppc-fix-lld-interp-v1-1-a083de6dccc9@kernel.org
In struct CoherentAllocation, use NonNull<T> instead of a raw *mut T for
the CPU address; the CPU address of a valid CoherentAllocation won't
ever be NULL.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20251103190655.2326191-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Using start_ptr() and start_ptr_mut() has the advantage that we inherit
the requirements the a mutable or immutable reference from those
methods.
Hence, use them instead of self.cpu_addr.
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20251103190655.2326191-1-dakr@kernel.org
[ Keep using self.cpu_addr in item_from_index(). - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Commit b96bae3ae2 ("powerpc/32: Replace ASM exception exit by C
exception exit from ppc64") erroneouly copied to powerpc/32 the logic
from powerpc/64 based on feature CPU_FTR_STCX_CHECKS_ADDRESS which is
always 0 on powerpc/32.
Re-instate the logic implemented by commit b64f87c16f ("[POWERPC]
Avoid unpaired stwcx. on some processors") which is based on
CPU_FTR_NEED_PAIRED_STWCX feature.
Fixes: b96bae3ae2 ("powerpc/32: Replace ASM exception exit by C exception exit from ppc64")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/6040b5dbcf5cdaa1cd919fcf0790f12974ea6e5a.1757666244.git.christophe.leroy@csgroup.eu
Commit 46f045db5a ("rust: Add read_poll_timeout_atomic function")
initiated the first import change in the I/O module using the agreed
"kernel vertical" import style [1].
For consistency throughout the module, adjust all other imports
accordingly.
While at it, drop unnecessary imports covered by prelude::*.
Link: https://docs.kernel.org/rust/coding-guidelines.html#imports [1]
Reviewed-by: Zhi Wang <zhiw@nvidia.com>
Link: https://patch.msgid.link/20251104133301.59402-1-dakr@kernel.org
[ Use prelude::* in io/poll.rs. - Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Commit 13799748b9 ("powerpc/64: use interrupt restart table to speed
up return from interrupt") removed the inconditional clearing of
MSR[RI] when returning from interrupt into kernel. But powerpc/32
doesn't implement interrupt restart table hence still need MSR[RI]
to be cleared.
It could be added back in interrupt_exit_kernel_prepare() but it is
easier and better to add it back in entry_32.S for following reasons:
- Writing to MSR must be followed by a synchronising instruction
- The smaller the non recoverable section is the better it is
So add a macro called clr_ri and use it in the three places that play
up with SRR0/SRR1. Use it just before another mtspr for synchronisation
to avoid having to add an isync.
Now that's done in entry_32.S, exit_must_hard_disable() can return
false for non book3s/64, taking into account that BOOKE doesn't have
MSR_RI.
Also add back blacklisting syscall_exit_finish for kprobe. This was
initially added by commit 7cdf440138 ("powerpc/entry32: Blacklist
syscall exit points for kprobe.") then lost with
commit 6f76a01173 ("powerpc/syscall: implement system call
entry/exit logic in C for PPC32").
Fixes: 6f76a01173 ("powerpc/syscall: implement system call entry/exit logic in C for PPC32")
Fixes: 13799748b9 ("powerpc/64: use interrupt restart table to speed up return from interrupt")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/66d0ab070563ad460ed481328ab0887c27f21a2c.1757593807.git.christophe.leroy@csgroup.eu
The label 2: in fast_exception_return is a leftover from
commit b96bae3ae2 ("powerpc/32: Replace ASM exception exit by C
exception exit from ppc64"). Once removed, we see that
fast_exception_return is a standalone function that is called only
from pieces of assembly dedicated to book3s/32 or booke, never by
common code or 8xx code.
So remove the clear of MSR[RI] enclosed in #ifdef CONFIG_PPC_8xx.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/39de3e0f0122b571474b1ba352a2dc3ad8cb71dd.1756304318.git.christophe.leroy@csgroup.eu
The elfcorehdr segment in the kdump image stores information about the
memory regions (called crash memory ranges) that the kdump kernel must
capture.
When a memory hot-remove event occurs, the kernel regenerates the
elfcorehdr for the currently loaded kdump image to remove the
hot-removed memory from the crash memory ranges.
Call chain:
remove_mem_range()
update_crash_elfcorehdr()
arch_crash_handle_hotplug_event()
crash_handle_hotplug_event()
While removing the hot-removed memory from the crash memory ranges in
remove_mem_range(), if the removed memory lies within an existing crash
range, that range is split into two. During this split, the size of the
second range was being calculated incorrectly.
This leads to dump capture failure with makedumpfile with below error:
$ makedumpfile -l -d 31 /proc/vmcore /tmp/vmcore
readpage_elf: Attempt to read non-existent page at 0xbbdab0000.
readmem: type_addr: 0, addr:c000000bbdab7f00, size:16
validate_mem_section: Can't read mem_section array.
readpage_elf: Attempt to read non-existent page at 0xbbdab0000.
readmem: type_addr: 0, addr:c000000bbdab7f00, size:8
get_mm_sparsemem: Can't get the address of mem_section.
The updated crash memory range in PT_LOAD entry is holding incorrect
data (checkout FileSiz and MemSiz):
readelf -a /proc/vmcore
<snip...>
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
LOAD 0x0000000b013d0000 0xc000000b80000000 0x0000000b80000000
0xffffffffc0000000 0xffffffffc0000000 RWE 0x0
<snip...>
Update the size calculation for the new crash memory range to fix this
issue.
Note: This problem will not occur if the kdump kernel is loaded or
reloaded after a memory hot-remove operation.
Fixes: 849599b702 ("powerpc/crash: add crash memory hotplug support")
Reported-by: Shirisha G <shirisha@linux.ibm.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20251105033941.1752287-1-sourabhjain@linux.ibm.com
Commit 35c18f2933 ("Add a new optional ",cma" suffix to the
crashkernel= command line option") and commit ab475510e0 ("kdump:
implement reserve_crashkernel_cma") added CMA support for kdump
crashkernel reservation.
Extend crashkernel CMA reservation support to powerpc.
The following changes are made to enable CMA reservation on powerpc:
- Parse and obtain the CMA reservation size along with other crashkernel
parameters
- Call reserve_crashkernel_cma() to allocate the CMA region for kdump
- Include the CMA-reserved ranges in the usable memory ranges for the
kdump kernel to use.
- Exclude the CMA-reserved ranges from the crash kernel memory to
prevent them from being exported through /proc/vmcore.
With the introduction of the CMA crashkernel regions,
crash_exclude_mem_range() needs to be called multiple times to exclude
both crashk_res and crashk_cma_ranges from the crash memory ranges. To
avoid repetitive logic for validating mem_ranges size and handling
reallocation when required, this functionality is moved to a new wrapper
function crash_exclude_mem_range_guarded().
To ensure proper CMA reservation, reserve_crashkernel_cma() is called
after pageblock_order is initialized.
Update kernel-parameters.txt to document CMA support for crashkernel on
powerpc architecture.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20251107080334.708028-1-sourabhjain@linux.ibm.com
Systems can now be partitioned into resource groups. By default all
systems will be part of default resource group. Once a resource group is
created, and resources allocated to the resource group, those resources
will be removed from the default resource group. If a LPAR moved to a
resource group, then it can only use resources in the resource group.
So maximum processors that can be allocated to a LPAR can be equal or
smaller than the resources in the resource group.
lparcfg can now exposes the resource group id to which this LPAR belongs
to. It also exposes the number of processors in the current resource
group. The default resource group id happens to be 0. These would be
documented in the upcoming PAPR update.
Example of an LPAR in a default resource group
root@ltcp11-lp3 $ grep resource_group /proc/powerpc/lparcfg
resource_group_number=0
resource_group_active_processors=50
root@ltcp11-lp3 $
Example of an LPAR in a non-default resource group
root@ltcp11-lp5 $ grep resource_group /proc/powerpc/lparcfg
resource_group_number=1
resource_group_active_processors=30
root@ltcp11-lp5 $
Signed-off-by: Srikar Dronamraju <srikar@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250716104600.59102-1-srikar@linux.ibm.com
If for example the sniffer did not follow any AIDs in an MU frame, then
some of the information may not be filled in or is even expected to be
invalid. As an example, in that case it is expected that Nss is zero.
Fixes: 2ff5e52e78 ("radiotap: add 0-length PSDU "not captured" type")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20251110142554.83a2858ee15b.I9f78ce7984872f474722f9278691ae16378f0a3e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix an ath11k transmit status reporting issue. This issue has always
been present, but not reported until recently.
Bringing this through the current release since there is now a
userspace entity that wants to leverage this.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ/mtSHzPUi16IfDEksFbugiYzLewUCaRH9agAKCRAsFbugiYzL
e+XoAQCDIbOqOsKn/WlNJVzjzObzo5kN+OCve1SknD4jxr3zAgD/QD5k1ODVwuo2
92mAPuZfn8j2IUemXhisUlfJVpW57gw=
=VmVz
-----END PGP SIGNATURE-----
Merge tag 'ath-current-20251110' of git://git.kernel.org/pub/scm/linux/kernel/git/ath/ath
Jeff Johnson says:
==================
ath.git update for v6.18-rc6
Fix an ath11k transmit status reporting issue. This issue has always
been present, but not reported until recently.
Bringing this through the current release since there is now a
userspace entity that wants to leverage this.
==================
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add vdd-supply and vddio-supply for fsl,mpl3115 to fix below CHECK_DTBS
warnings:
arch/arm/boot/dts/nxp/imx/imx53-ppd.dtb: pressure-sensor@60 (fsl,mpl3115): 'vdd-supply' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add vdd-supply and vddio-supply for fsl,mpl3115 to fix CHECK_DTBS warning:
arch/arm64/boot/dts/freescale/imx8qm-mek.dtb: pressure-sensor@60 (fsl,mpl3115): 'vdd-supply' is a required property
from schema $id: http://devicetree.org/schemas/iio/pressure/fsl,mpl3115.yaml#
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Delete usb3_lpcg node for imx8dxl because not exist at such hardware.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add fsl,tuning-step for usdhc1 and usdhc2 to improve card compatibility.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add default clock rate for usdhc nodes to support higher transfer speed.
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Default, state_100mhz and state_200mhz use the same settings. But current
kernel driver use these to indicate if sd3.0 support.
Add max-frequency for usdhc2 because board design limitation.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Swap interrupt numbers of eqos because the below commit just swap
interrupt-names and missed swap interrupts also.
The driver (drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c) use
interrupt-names to get irq numbers.
Fixes: f29c19a6e4 ("arm64: dts: imx8dxl-ss-conn: Fix Ethernet interrupt-names order")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Tested-by: Alexander Dahl <ada@thorsis.com>
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
amd_pstate_change_mode_without_dvr_change() calls cppc_set_auto_sel()
for all the present CPUs.
However, this callpath eventually calls cppc_set_reg_val() which
accesses the per-cpu cpc_desc_ptr object. This object is initialized
only for online CPUs via acpi_soft_cpu_online() -->
__acpi_processor_start() --> acpi_cppc_processor_probe().
Hence, restrict calling cppc_set_auto_sel() to only the online CPUs.
Fixes: 3ca7bc818d ("cpufreq: amd-pstate: Add guided mode control support via sysfs")
Suggested-by: Mario Limonciello (AMD) (kernel.org) <superm1@kernel.org>
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
In case a new index is introduced add a static assert to make sure
that strings and values are updated.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Add whitespace around the equals and remove leading space.
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>