Commit graph

1,427,869 commits

Author SHA1 Message Date
Chen-Yu Tsai
a9050236f8 arm64: dts: allwinner: a523: Add I2S2 pins on PI pin group
The Radxa Cubie A5E exposes I2S2 through the PI pin group on the 40-pin
GPIO header.

Add a pinmux setting for it so potential users can directly reference
it.

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251027125655.793277-9-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
2025-10-29 01:07:33 +08:00
Chen-Yu Tsai
1fe1e9b671 arm64: dts: allwinner: a523: Add device nodes for I2S controllers
The A523 family of SoCs have four I2S controllers capable of both
playback and capture. The user manual also implies that I2S2 also
outputs to the eDP interface controller.

Add device nodes for all of them.

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251027125655.793277-8-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
2025-10-29 01:07:33 +08:00
Chen-Yu Tsai
e51b773798 arm64: dts: allwinner: a523: Add device node for SPDIF block
The A523 has a SPDIF interface that is capable of both playback and
capture.

Add a node for it.

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251027125655.793277-7-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
2025-10-29 01:07:33 +08:00
Chen-Yu Tsai
55d43ef777 arm64: dts: allwinner: a523: Add DMA controller device nodes
The A523 has two DMA controllers. Add device nodes for both. Also hook
up DMA for existing devices.

Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251027125655.793277-6-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
2025-10-29 01:07:33 +08:00
Chen-Yu Tsai
697fbb43ab dt-bindings: dma: allwinner,sun50i-a64-dma: Add compatibles for A523
There are two DMA controllers on the A523, one in the main system area
and the other for the MCU. These are the same as the one found on the
A100. The only difference is the DMA endpoint (DRQ) layout.

Since the number of channels and endpoints are described with additional
generic properties, just add new A523-specific compatible strings and
fallback to the A100 one.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251027125655.793277-2-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
2025-10-29 01:07:33 +08:00
Richard Genoud
f55a252631 arm64: dts: allwinner: h616: add NAND controller
The H616 has a NAND controller quite similar to the A10/A23 ones, but
with some register differences, more clocks (for ECC and MBUS), more ECC
strengths, so this requires a new compatible string.

Add the NAND controller node and pins in the device tree.

Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Link: https://patch.msgid.link/20251028073534.526992-17-richard.genoud@bootlin.com
[wens@kernel.org: Fixed alignment of clocks in nand-controller node]
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
2025-10-29 01:00:56 +08:00
Valentin Schneider
d1e6d27738 rcu: Add a small-width RCU watching counter debug option
A later commit will reduce the size of the RCU watching counter to free up
some bits for another purpose. Paul suggested adding a config option to
test the extreme case where the counter is reduced to its minimum usable
width for rcutorture to poke at, so do that.

Make it only configurable under RCU_EXPERT. While at it, add a comment to
explain the layout of context_tracking->state.

Link: http://lore.kernel.org/r/4c2cb573-168f-4806-b1d9-164e8276e66a@paulmck-laptop
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
2025-10-28 17:32:56 +01:00
Alexander Usyskin
3e9c49d4c3 mtd: intel-dg: wake card on operations
The Intel DG cards do not have separate power control for
persistent memory.
The memory is available when the whole card is awake.

Enable runtime PM in mtd driver to notify parent graphics driver
that whole card should be kept awake while nvm operations are
performed through this driver.

Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-10-28 17:24:49 +01:00
Arnaud Lecomte
23f852daa4 bpf: Fix stackmap overflow check in __bpf_get_stackid()
Syzkaller reported a KASAN slab-out-of-bounds write in __bpf_get_stackid()
when copying stack trace data. The issue occurs when the perf trace
 contains more stack entries than the stack map bucket can hold,
 leading to an out-of-bounds write in the bucket's data array.

Fixes: ee2a098851 ("bpf: Adjust BPF stack helper functions to accommodate skip > 0")
Reported-by: syzbot+c9b724fbb41cf2538b7b@syzkaller.appspotmail.com
Signed-off-by: Arnaud Lecomte <contact@arnaud-lcm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20251025192941.1500-1-contact@arnaud-lcm.com

Closes: https://syzkaller.appspot.com/bug?extid=c9b724fbb41cf2538b7b
2025-10-28 09:20:27 -07:00
Arnaud Lecomte
e17d62fedd bpf: Refactor stack map trace depth calculation into helper function
Extract the duplicated maximum allowed depth computation for stack
traces stored in BPF stacks from bpf_get_stackid() and __bpf_get_stack()
into a dedicated stack_map_calculate_max_depth() helper function.

This unifies the logic for:
- The max depth computation
- Enforcing the sysctl_perf_event_max_stack limit

No functional changes for existing code paths.

Signed-off-by: Arnaud Lecomte <contact@arnaud-lcm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20251025192858.31424-1-contact@arnaud-lcm.com
2025-10-28 09:20:27 -07:00
Richard Genoud
88fd4e4dea mtd: rawnand: sunxi: Add support for H616 nand controller
The H616 nand controller has the same base as A10/A23, with some
differences:
- mdma is based on chained buffers
- its ECC supports up to 80bit per 1024bytes
- some registers layouts are a bit different, mainly due do the stronger
  ECC.
- it uses USER_DATA_LEN registers along USER_DATA registers.
- it needs a specific clock for ECC and MBUS.

Introduce the basic support, with ECC and scrambling, but without
DMA/MDMA.

Tested on Whatsminer H616 board (with and without scrambling, ECC)

Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-10-28 17:18:13 +01:00
Richard Genoud
5ddfbc68ec mtd: rawnand: sunxi: introduce sram_size in sunxi_nfc_caps
The H6/H616 the SRAM is bigger than the A10/A23 one, so move its size
into sunxi_nfc_caps.

No functional change

Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-10-28 17:18:13 +01:00
Richard Genoud
97d13bcea2 mtd: rawnand: sunxi: introduce ecc_err_mask in sunxi_nfc_caps
The H6/H616 error mask register is bigger than the A10/A23 one, so move
its mask into sunxi_nfc_caps.

No functional change

Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-10-28 17:18:13 +01:00
Richard Genoud
6208274d0a mtd: rawnand: sunxi: introduce reg_spare_area in sunxi_nfc_caps
The H6/H616 spare area register is not at the same offset as the
A10/A23 one, so move its offset into sunxi_nfc_caps.

No functional change.

Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-10-28 17:18:13 +01:00
Richard Genoud
ee61bba4ee mtd: rawnand: sunxi: introduce reg_pat_id in sunxi_nfc_caps
The H6/H616 pattern ID register is not at the same offset as the
A10/A23 one, so move its offset into sunxi_nfc_caps.

No functional change.

Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-10-28 17:18:13 +01:00
Richard Genoud
1340fa8721 mtd: rawnand: sunxi: introduce random en/dir in sunxi_nfc_caps
The H6/H616 RANDOM EN/DIRECTION masks are different from A10/A23.
So move the masks into sunxi_nfc_caps.

No functional change.

Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-10-28 17:18:13 +01:00
Richard Genoud
d21b433815 mtd: rawnand: sunxi: introduce ecc_mode_mask in sunxi_nfc_caps
The H6/H616 ECC_MODE field is not at the same offset, and has not the
same size.
So move the mask into sunxi_nfc_caps.

Also, introduce a non compile-time field_prep() because FIELD_PREP()
doesn't work with non compile-time constant.

No functional change.

Link: https://lore.kernel.org/all/cover.1761588465.git.geert+renesas@glider.be
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-10-28 17:18:04 +01:00
Richard Genoud
8c1b28ab3e mtd: rawnand: sunxi: add has_ecc_block_512 capability
The H616 controller can't handle 512 bytes ECC block size. The
NFC_ECC_BLOCK_512 bit disappeared in H6, and NDFC_RANDOM_EN took its
place.

So, add has_ecc_block_512 capability to only set this bit on SoC having
it.

No functional change.

Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-10-28 17:18:04 +01:00
Richard Genoud
6fc2619af1 mtd: rawnand: sunxi: rework pattern found registers
On H6/H616, the register ECC_PAT_FOUND is at its own address, and not
part of ECC status register.
So, introduce the pattern found register offset in sunxi_nfc_caps, along
with its mask.

Also, introduce a non compile-time field_get() because FIELD_GET() and
u32_get_bits() don't work with non compile-time constant.

No functional change.

Link: https://lore.kernel.org/all/cover.1761588465.git.geert+renesas@glider.be
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-10-28 17:17:47 +01:00
Richard Genoud
f53c74d057 mtd: rawnand: sunxi: introduce reg_user_data in sunxi_nfc_caps
The H6/H616 USER_DATA register is not at the same offset as the
A10/A23 one, so move its offset into sunxi_nfc_caps

No functional change.

Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-10-28 17:16:01 +01:00
Richard Genoud
4a3a056814 mtd: rawnand: sunxi: introduce reg_ecc_err_cnt in sunxi_nfc_caps
The H6/H616 ECC_ERR_CNT register is not at the same offset as the
A10/A23 one, so move its offset into sunxi_nfc_caps

No functional change.

Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-10-28 17:16:01 +01:00
Richard Genoud
94dc08adaf mtd: rawnand: sunxi: move ECC strenghts in sunxi_nfc_caps
H6/H616 has more ECC strenghts than A10/A23.

Move the ECC strenghts array to sunxi_nfc_caps to make it ready for
H6/H616 support.

No functional change.

Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-10-28 17:16:01 +01:00
Richard Genoud
1be7ac78b7 mtd: rawnand: sunxi: Replace hard coded value by a define
The user data length (4) used all over the code hard coded.
And sometimes, it's not that trivial to know that it's the user data
length and not something else.
Moreover, for the H6/H616 this value is no more fixed by hardware, but
could be modified.

Using a define here makes the code more readable.

Suggested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-10-28 17:16:01 +01:00
Richard Genoud
deaa77ed66 mtd: rawnand: sunxi: Remove superfluous register readings
The register NFC_REG_ECC_CTL was read twice and the result was not used,
then a third time with a mask applied.
Removing those calls didn't change the behavior.

Tested on H616 SoC, scrambling enabled.

Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-10-28 17:16:01 +01:00
Richard Genoud
7c99743a0b dt-bindings: mtd: sunxi: Add H616 compatible
The H616 NAND controller is quite different from the A10 and A23 ones,
some registers offset changed, and some new one are introduced.
Also, the DMA handling is different (it uses chained descriptors)

So, introduce a new compatible to represent this version of the IP.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Richard Genoud <richard.genoud@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-10-28 17:16:01 +01:00
Cezar Chiru
890a12d2f7 i2c: pcf8584: Change pcf_doAdress() to pcf_send_address()
Change name of pcf_doAddress() function to pcf_send_address() to be
more in line with the kernel functions naming.

Suggested-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Cezar Chiru <chiru.cezar.89@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251023120043.8661-4-chiru.cezar.89@gmail.com
2025-10-28 17:05:39 +01:00
Cezar Chiru
e7ba30357a i2c: pcf8584: Make pcf_doAddress() function void
Change pcf_doAddress() function's type from int to void as it always
returns 0. This way there is no need for extra assignment and extra checks
when the function is called.
Remove assignment of pcf_doAddress() and replace it with a simple function
call.

Suggested-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Cezar Chiru <chiru.cezar.89@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251023120043.8661-3-chiru.cezar.89@gmail.com
2025-10-28 17:05:25 +01:00
Cezar Chiru
11cb461c2e i2c: pcf8584: Move 'ret' variable inside for loop, goto out if ret < 0.
Require spaces around '=' and '<'. Add spaces around binary operators.
Enforce error fixing based on checkpatch.pl output on file.
Move 'ret' variable inside for loop. Then check if (ret < 0) goto out. This
improves usage of ret variable.

Signed-off-by: Cezar Chiru <chiru.cezar.89@gmail.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20251023120043.8661-2-chiru.cezar.89@gmail.com
2025-10-28 17:05:16 +01:00
Haotian Zhang
cdf44f1add mtd: rawnand: lpc32xx_slc: fix GPIO descriptor leak on probe error and remove
The driver calls gpiod_get_optional() in the probe function but
never calls gpiod_put() in the remove function or in the probe
error path. This leads to a GPIO descriptor resource leak.
The lpc32xx_mlc.c driver in the same directory handles this
correctly by calling gpiod_put() on both paths.

Add gpiod_put() in the remove function and in the probe error path
to fix the resource leak.

Fixes: 6b923db286 ("mtd: rawnand: lpc32xx_slc: switch to using gpiod API")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-10-28 17:04:34 +01:00
Sakari Ailus
2052c1e59b mtd: rawnand: gpmi: Remove redundant pm_runtime_mark_last_busy() calls
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-10-28 17:04:34 +01:00
Niravkumar L Rabara
bf425fa103 mtd: rawnand: cadence: Add support for NV-DDR interface mode
Add support for NV-DDR mode in the Cadence NAND controller driver.

Signed-off-by: Niravkumar L Rabara <niravkumarlaxmidas.rabara@altera.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-10-28 17:04:34 +01:00
Aryan Srivastava
050553c683 mtd: nand: relax ECC parameter validation check
Due to the custom handling and layouts of certain nand controllers this
validity check will always fail for certain layouts. The check
inherently depends on even chunk sizing and this is not always the
case.

Modify the check to only print a warning, instead of failing to
init the attached NAND. This allows various 8 bit and 12 ECC strength
layouts to be used.

Fixes: 68c18dae68 ("mtd: rawnand: marvell: add missing layouts")
Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-10-28 17:04:34 +01:00
Aryan Srivastava
fbd72cb463 Revert "mtd: rawnand: marvell: fix layouts"
This reverts commit e6a30d0c48.

This change resulted in the 8bit ECC layouts having the incorrect amount
of read/write chunks, the last spare bytes chunk would always be missed.

Fixes: e6a30d0c48 ("mtd: rawnand: marvell: fix layouts")
Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-10-28 17:04:34 +01:00
Wolfram Sang
9d4d01a293 dt-bindings: mtd: physmap: add 'clocks' and 'power-domains'
Physmap supports minimal PM since commit 0bc448b49e ("mtd: maps:
physmap: Add minimal Runtime PM support"), so support it also when used
in DT configurations.

Suggested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2025-10-28 17:04:17 +01:00
Zhang Chujun
88427328e3 bpftool: Fix missing closing parethesis for BTF_KIND_UNKN
In the btf_dumper_do_type function, the debug print statement for
BTF_KIND_UNKN was missing a closing parenthesis in the output format.
This patch adds the missing ')' to ensure proper formatting of the
dump output.

Signed-off-by: Zhang Chujun <zhangchujun@cmss.chinamobile.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251028063345.1911-1-zhangchujun@cmss.chinamobile.com
2025-10-28 09:00:55 -07:00
Sakari Ailus
1bc9d39275 drm/radeon: Remove redundant pm_runtime_mark_last_busy() calls
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-redundant explicit call to
pm_runtime_mark_last_busy().

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-28 11:31:45 -04:00
Sakari Ailus
ef4a4b8781 drm/amd: Remove redundant pm_runtime_mark_last_busy() calls
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-redundant explicit call to
pm_runtime_mark_last_busy().

Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2025-10-28 11:31:45 -04:00
Shawn Guo
48cbf50531
regmap: irq: Correct documentation of wake_invert flag
Per commit 9442490a02 ("regmap: irq: Support wake IRQ mask inversion")
the wake_invert flag is to support enable register, so cleared bits are
wake disabled.

Fixes: 68622bdfef ("regmap: irq: document mask/wake_invert flags")
Cc: stable@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Link: https://patch.msgid.link/20251024082344.2188895-1-shawnguo2@yeah.net
Signed-off-by: Mark Brown <broonie@kernel.org>
2025-10-28 15:17:36 +00:00
Hans de Goede
4173edb076
platform/x86: dell-wmi-base: Handle electronic privacy screen on/off events
Add handling for events for the electronic privacy screen found on some
models (e.g. Dell Latitude 7300) being toggled on/off.

Emit KEY_EPRIVACY_SCREEN_OFF / KEY_EPRIVACY_SCREEN_ON events for this so
that userspace can show the usual on-screen-display (OSD) notification for
eprivacy screen on/off to the user.

Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20251020152331.52870-3-hansg@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-10-28 17:12:00 +02:00
Hans de Goede
8f3eaad981
Input: Add keycodes for electronic privacy screen on/off hotkeys
Add keycodes for hotkeys toggling the electronic privacy screen found on
some laptops on/off.

There already is an API for eprivacy screens as kernel-mode-setting drm
connector object properties:
https://www.kernel.org/doc/html/latest/gpu/drm-kms.html#standard-connector-properties

this API also supports reporting when the eprivacy screen is turned on/off
by the embedded-controller (EC) in response to hotkey presses.

But on some laptops (e.g. the Dell Latitude 7300) the firmware does not
allow querying the presence nor the status of the eprivacy screen at boot.
This makes it impossible to implement the drm connector properties API
since drm objects do not allow adding new properties after creation and
the presence of the eprivacy cannot be detected at boot.

The first notice of the presence of an eprivacy screen on these laptops is
an EC generated (WMI) event when the eprivacy screen hotkeys are pressed.

In this case the new keycodes this change adds can be generated to notify
userspace of the eprivacy screen on/off hotkeys being pressed, so that
userspace can show the usual on-screen-display (OSD) notification for eprivacy
screen on/off to the user. This is similar to how e.g. touchpad on/off
keycodes are used to show the touchpad on/off OSD.

Signed-off-by: Hans de Goede <hansg@kernel.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20251020152331.52870-2-hansg@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-10-28 17:11:57 +02:00
Sakari Ailus
7f7d28c69e
MAINTAINERS: Update int3472 maintainers
Add myself as the maintainer of the int3472 driver. Also update Daniel's
e-mail address while at it.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://patch.msgid.link/20251028084959.394795-1-sakari.ailus@linux.intel.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-10-28 17:07:10 +02:00
Qiu Wenbo
f0f7a3f542
platform/x86: int3472: Fix double free of GPIO device during unregister
regulator_unregister() already frees the associated GPIO device. On
ThinkPad X9 (Lunar Lake), this causes a double free issue that leads to
random failures when other drivers (typically Intel THC) attempt to
allocate interrupts. The root cause is that the reference count of the
pinctrl_intel_platform module unexpectedly drops to zero when this
driver defers its probe.

This behavior can also be reproduced by unloading the module directly.

Fix the issue by removing the redundant release of the GPIO device
during regulator unregistration.

Cc: stable@vger.kernel.org
Fixes: 1e5d088a52 ("platform/x86: int3472: Stop using devm_gpiod_get()")
Signed-off-by: Qiu Wenbo <qiuwenbo@kylinsec.com.cn>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://patch.msgid.link/20251028063009.289414-1-qiuwenbo@gnome.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2025-10-28 17:06:14 +02:00
Ivan Lipski
b3656b355b drm/amd/display: Fix incorrect return of vblank enable on unconfigured crtc
[Why&How]
Return -EINVAL when userspace asks us to enable vblank on a crtc that is
not yet enabled.

Suggested-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/1856
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit cb57b8cdb0)
Cc: stable@vger.kernel.org
2025-10-28 11:05:47 -04:00
Alex Hung
7d08c3b173 drm/amd/display: Add HDR workaround for a specific eDP
[WHY & HOW]
Some eDP panels suffer from flicking when HDR is enabled in KDE or
Gnome.

This add another quirk to worksaround to skip VSC that is incompatible
with an eDP panel.

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/4452
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 99441824be)
Cc: stable@vger.kernel.org
2025-10-28 11:04:40 -04:00
Alex Deucher
4f2cd64510 drm/amdgpu: fix SPDX header on cyan_skillfish_reg_init.c
This should be MIT.  The driver in general is MIT and
the license text at the top of the file is MIT so fix
it.

Fixes: e8529dbc75 ("drm/amdgpu: add ip offset support for cyan skillfish")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4654
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 102c4f7c55)
2025-10-28 11:03:04 -04:00
Alex Deucher
8284a9e917 drm/amdgpu: fix SPDX header on irqsrcs_vcn_5_0.h
This should be MIT.  The driver in general is MIT and
the license text at the top of the file is MIT so fix
it.

Fixes: d1bb646510 ("drm/amdgpu: add irq source ids for VCN5_0/JPEG5_0")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4654
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 68c20d7b17)
2025-10-28 11:02:49 -04:00
Alex Deucher
964f8ff276 drm/amdgpu: fix SPDX header on amd_cper.h
This should be MIT.  The driver in general is MIT and
the license text at the top of the file is MIT so fix
it.

Fixes: 523b69c654 ("drm/amd/include: Add amd cper header")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4654
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 72c5482cb0)
2025-10-28 11:02:42 -04:00
Alex Deucher
f3b37ebf2c drm/amdgpu: fix SPDX headers on amdgpu_cper.c/h
These should be MIT.  The driver in general is MIT and
the license text at the top of the files is MIT so fix
it.

Fixes: 92d5d2a09d ("drm/amdgpu: Introduce funcs for populating CPER")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4654
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit abd3f87640)
2025-10-28 11:02:36 -04:00
John Smith
501672e3c1 drm/amd/pm/powerplay/smumgr: Fix PCIeBootLinkLevel value on Iceland
Previously this was initialized with zero which represented PCIe Gen
1.0 instead of using the
maximum value from the speed table which is the behaviour of all other
smumgr implementations.

Fixes: 18aafc59b1 ("drm/amd/powerplay: implement fw related smu interface for iceland.")
Signed-off-by: John Smith <itistotalbotnet@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 92b0a6ae66)
2025-10-28 11:02:19 -04:00
John Smith
07a13f913c drm/amd/pm/powerplay/smumgr: Fix PCIeBootLinkLevel value on Fiji
Previously this was initialized with zero which represented PCIe Gen
1.0 instead of using the
maximum value from the speed table which is the behaviour of all other
smumgr implementations.

Fixes: 18edef19ea ("drm/amd/powerplay: implement fw image related smu interface for Fiji.")
Signed-off-by: John Smith <itistotalbotnet@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit c52238c9fb)
2025-10-28 11:02:13 -04:00