The atclk is an optional clock for the CoreSight TMC, but the driver
misses to initialize it. In most cases, TMC shares the atclk clock with
other CoreSight components. Since these components enable the clock
before the TMC device is initialized, the TMC continues properly,
which is why we don’t observe any lockup issues.
This change enables atclk in probe of the TMC driver. Given the clock
is optional, it is possible to return NULL if the clock does not exist.
IS_ERR() is tolerant for this case.
Dynamically disable and enable atclk during suspend and resume. The
clock pointers will never be error values if the driver has successfully
probed, and the case of a NULL pointer case will be handled by the clock
core layer. The driver data is always valid after probe. Therefore,
remove the related checks. Also in the resume flow adds error handling.
Fixes: bc4bf7fe98 ("coresight-tmc: add CoreSight TMC driver")
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Yeoreum Yun <yeoreum.yun@arm.com>
Tested-by: James Clark <james.clark@linaro.org>
Signed-off-by: Leo Yan <leo.yan@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250731-arm_cs_fix_clock_v4-v6-1-1dfe10bb3f6f@arm.com
The TRCEXTINSELR is only implemented if TRCIDR5.NUMEXTINSEL > 0.
To avoid invalid accesses, introduce a check on numextinsel
(derived from TRCIDR5[11:9]) before reading or writing to this register.
Fixes: f5bd523690 ("coresight: etm4x: Convert all register accesses")
Signed-off-by: Yuanfang Zhang <yuanfang.zhang@oss.qualcomm.com>
Reviewed-by: James Clark <james.clark@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250812-trcextinselr_issue-v2-1-e6eb121dfcf4@oss.qualcomm.com
The devm_ioremap_resource() function returns error pointers on error.
It never returns NULL. Update the error checking to match.
Fixes: e54a52a28a ("coresight: add coresight Trace Network On Chip driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/7bd9fae8-a15f-412a-8800-ce47acf0b5ce@sabinyo.mountain
Jan Kara reported that the shared ILOCK held across the journal
flush during fdatasync operations slows down O_DSYNC DIO on
unwritten extents significantly. The underlying issue is that
unwritten extent conversion needs the ILOCK exclusive, whilst the
datasync operation after the extent conversion holds it shared.
Hence we cannot be flushing the journal for one IO completion whilst
at the same time doing unwritten extent conversion on another IO
completion on the same inode. This means that IO completions
lock-step, and IO performance is dependent on the journal flush
latency.
Jan demonstrated that reducing the ifdatasync lock hold time can
improve O_DSYNC DIO to unwritten extents performance by 2.5x.
Discussion on that patch found issues with the method, and we
came to the conclusion that separately tracking datasync flush
sequences was the best approach to solving the problem.
The fsync code uses the ILOCK to serialise against concurrent
modifications in the transaction commit phase. In a transaction
commit, there are several disjoint updates to inode log item state
that need to be considered atomically by the fsync code. These
operations are all done under ILOCK_EXCL context:
1. ili_fsync_flags is updated in ->iop_precommit
2. i_pincount is updated in ->iop_pin before it is added to the CIL
3. ili_commit_seq is updated in ->iop_committing, after it has been
added to the CIL
In fsync, we need to:
1. check that the inode is dirty in the journal (ipincount)
2. check that ili_fsync_flags is set
3. grab the ili_commit_seq if a journal flush is needed
4. clear the ili_fsync_flags to ensure that new modifications that
require fsync are tracked in ->iop_precommit correctly
The serialisation of ipincount/ili_commit_seq is needed
to ensure that we don't try to unnecessarily flush the journal.
The serialisation of ili_fsync_flags being set in
->iop_precommit and cleared in fsync post journal flush is
required for correctness.
Hence holding the ILOCK_SHARED in xfs_file_fsync() performs all this
serialisation for us. Ideally, we want to remove the need to hold
the ILOCK_SHARED in xfs_file_fsync() for best performance.
We start with the observation that fsync/fdatasync() only need to
wait for operations that have been completed. Hence operations that
are still being committed have not completed and datasync operations
do not need to wait for them.
This means we can use a single point in time in the commit process
to signal "this modification is complete". This is what
->iop_committing is supposed to provide - it is the point at which
the object is unlocked after the modification has been recorded in
the CIL. Hence we could use ili_commit_seq to determine if we should
flush the journal.
In theory, we can already do this. However, in practice this will
expose an internal global CIL lock to the IO path. The ipincount()
checks optimise away the need to take this lock - if the inode is
not pinned, then it is not in the CIL and we don't need to check if
a journal flush at ili_commit_seq needs to be performed.
The reason this is needed is that the ili_commit_seq is never
cleared. Once it is set, it remains set even once the journal has
been committed and the object has been unpinned. Hence we have to
look that journal internal commit sequence state to determine if
ili_commit_seq needs to be acted on or not.
We can solve this by clearing ili_commit_seq when the inode is
unpinned. If we clear it atomically with the last unpin going away,
then we are guaranteed that new modifications will order correctly
as they add a new pin counts and we won't clear a sequence number
for an active modification in the CIL.
Further, we can then allow the per-transaction flag state to
propagate into ->iop_committing (instead of clearing it in
->iop_precommit) and that will allow us to determine if the
modification needs a full fsync or just a datasync, and so we can
record a separate datasync sequence number (Jan's idea!) and then
use that in the fdatasync path instead of the full fsync sequence
number.
With this infrastructure in place, we no longer need the
ILOCK_SHARED in the fsync path. All serialisation is done against
the commit sequence numbers - if the sequence number is set, then we
have to flush the journal. If it is not set, then we have nothing to
do. This greatly simplifies the fsync implementation....
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Tested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
There are similar extsize checks and updates done inside and outside
the inode item lock, which could all be done under a single top
level logic branch outside the ili_lock. The COW extsize fixup can
potentially miss updating the XFS_ILOG_CORE in ili_fsync_fields, so
moving this code up above the ili_fsync_fields update could also be
considered a fix.
Further, to make the next change a bit cleaner, move where we
calculate the on-disk flag mask to after we attach the cluster
buffer to the the inode log item.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The function is unused; remove it.
Instead of relying on a general blit helper, drivers should pick a blit
function by themselves from their list of supported color formats.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250918154207.84714-4-tzimmermann@suse.de
Some configurations of sysfb outputs require format conversion from
framebuffer to scanout buffer. It is a driver bug if the conversion
helper is missing, yet it might happen on odd scanout formats. The old
code, based on drm_fb_blit(), only detects this situation during the
commit's hardware update, which is too late to abort the update.
Lookup the correct blit helper as part of the check phase. Then store
it in the sysfb plane state. Allows for detection of a missing helper
before the commit has started. Also avoids drm_fb_blit()'s large switch
statement on each updated scanline. Only a single lookup has to be done.
The lookup is in drm_sysfb_get_blit_func(), which only tracks formats
supported by sysfb drivers.
The lookup happens in sysfb's begin_fb_access helper instead of its
atomic_check helper. This allows vesadrm, and possibly other drivers,
to implement their own atomic_check without interfering with blit
lookups. Vesadrm implements XRGB8888 on top of R8 formats with the
help of the atomic_check. Doing the blit lookup in begin_fb_access then
always uses the correct CRTC format on all drivers.
v2:
- vesadrm: use drm_sysfb_plane_helper_begin_fb_access()
- fix type in commit description (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250918154207.84714-3-tzimmermann@suse.de
The plane-state type struct drm_sysfb_plane_state will store the
helper for blitting to the scanout buffer.
v2:
- add variable for duplicated shadow-plane state (Javier)
- fix build error
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250918154207.84714-2-tzimmermann@suse.de
The dm-raid code was using hardcoded integer values to represent the
read-only/read-write state of RAID arrays instead of the proper
enumeration constants defined in the md_ro_state enumerator type.
Changes:
- Replace hardcoded integers with the appropriate md_ro_state enumerator
values
- Add the missing MD_RDONLY setting in the post_suspend function
(no failures have been attributed to this inconsistency, the fix
ensures correct state transitions for completeness)
This improves code clarity and maintainability by using the defined
enumeration constants rather than magic numbers, ensuring the code
properly conforms to the established API interface.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
The previous patch preferred async interface for the purpose of testing.
However, the synchronous interface is faster, so it should be preferred.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Make sure that the "data" argument passed to integrity_sector_checksum is
always page-aligned and add an "offset" argument that specifies the
offset from the start of the page. This will enable us to use the
asynchronous hash interface later.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Allocate the recalculate buffer with kmalloc rather than vmalloc. This
will be needed later, for the simplification of the asynchronous hash
interface.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Similar to how we annotate dma-fences, add lockep annotation to
the pm_block completion to ensure we don't wait for it while holding
locks that are needed in the pm notifier or in the device
suspend / resume callbacks.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250918142848.21807-3-thomas.hellstrom@linux.intel.com
During pm notifier eviction we may still race with validations.
Ensure those are blocked out during eviction to ensure we have
access to as much system memory as possible.
During the suspend operation itself, we run single-threaded so that
shouldn't be a problem.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/20250918142848.21807-2-thomas.hellstrom@linux.intel.com
New device support
==================
ad,ade9000
- New driver for this complex energy and power monitoring ADC.
infineon,tlv493d
- New driver for this 3D magnetic sensor.
intel,dollar
- New driver for this TI PMIC (part number unknown)
marvel,88pm886
- Driver for this PMIC ADC.
microchip,mcp9600
- Add explicit support for the mcp9601 which has some additional features
over the mcp9600.
rohm,bd79112
- New driver for this ADC / GPIO Chip.
Features
========
Core
- New helper to multiply data expressed in IIO types.
- Add KUnit tests.
- New IIO_ALTCURRENT type, similar to existing IIO_ALTVOLTAGE
- Add some channel modifiers related to energy and power, such as
reactive.
adi,ad7124
- Support external clocks sources and output of the internal clocks.
- Filter control.
adi,ad7173
- Add filter support. Some fiddly interactions with other parameters on this
device.
adi,ad7779
- Add backend support which required control of the number of lanes used.
liteon,ltr390
- Add runtime PM support.
microchip,mcp9600
- Add support for different thermocouple types.
Cleanup and minor fixes
=======================
core
- Switch info_mask fields to be unsigned. Not clear why they were ever
signed.
- Fix handling of negative channel scale in iio_convert_raw_to_processed()
- Fix offset handling for channels without a scale attribute.
- Improve the precision of scaling slightly.
- Drop apparent handling of IIO_CHAN_INFO_PROCESSED for devices that don't
have any such channels.
various
- Drop many pm_runtime_mark_last_busy() calls now
pm_runtime_put_autosuspend() calls it internally.
- Drop dev_err_probe() calls where the error code is hard coded as -ENOMEM
as they don't do anything.
- Drop dev_err() calls where the error code is -ENOMEM. This will reduce
error prints, but memory failures generate a lot of messages anyway
so unlikely we need these prints.
current-sense-amplifier
- Add #io-channels property this channel to be used by a consumer driver.
adi,ad7124
- Fix incorrect clocks dt-binding property.
- Make the mclk clock optional in DT - this is internal to the ADC so should
never have been in he binding.
- Fix up sample rate to comply with ABI.
- Use read_avail() callback rather than opencoding similar.
- Deploy guard() to clean up some lock handling.
adi,ad7768
- Use devm_regulator_get_enable_read_voltage() to replace similar code.
adi,ad7816
- Drop an unnecessary dev_set_drvdata() call as nothing uses the data.
ad,adxl345
- Fix missing blank line before bullet list in documentation.
arm,scmi
- Use devm_kcalloc() for an array allocation rather than devm_kzalloc().
bosch,bmi270
- Match an ACPI ID seen in the wild. It is not spec compliant but we can't
do much about that.
bosch,bmp280
- Drop overly noisy dev_info()
- Allow for sleeping gpio controllers.
gogle,cros-ec
- Drop unused location attribute that has been replaced by label.
invense,icm42600
- Simplify the power management.
- Use guard() to simplify some locking.
maxim,max1238
- Add io-channel-cells property to dt-binding as there is an in tree
consumer.
microchip,mcp9600
- Specify a default value in dt-binding for the thermocouple type
- General whitespace cleanup.
samsung,exynos
- Drop support for the S3C2410 including bindings, and touchscreen support
as nothing else uses that.
- Drop platform ID based binding as not used.
st,vl53l0x
- Fix returning the wrong variable in an error path.
ti,pac1934
- Replace open coded devm_mutex_init().
xilinx,ams
- Update maintainers entry.
-----BEGIN PGP SIGNATURE-----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=iOJF
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.18a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: New device support, features and cleanup for 6.18
New device support
==================
ad,ade9000
- New driver for this complex energy and power monitoring ADC.
infineon,tlv493d
- New driver for this 3D magnetic sensor.
intel,dollar
- New driver for this TI PMIC (part number unknown)
marvel,88pm886
- Driver for this PMIC ADC.
microchip,mcp9600
- Add explicit support for the mcp9601 which has some additional features
over the mcp9600.
rohm,bd79112
- New driver for this ADC / GPIO Chip.
Features
========
Core
- New helper to multiply data expressed in IIO types.
- Add KUnit tests.
- New IIO_ALTCURRENT type, similar to existing IIO_ALTVOLTAGE
- Add some channel modifiers related to energy and power, such as
reactive.
adi,ad7124
- Support external clocks sources and output of the internal clocks.
- Filter control.
adi,ad7173
- Add filter support. Some fiddly interactions with other parameters on this
device.
adi,ad7779
- Add backend support which required control of the number of lanes used.
liteon,ltr390
- Add runtime PM support.
microchip,mcp9600
- Add support for different thermocouple types.
Cleanup and minor fixes
=======================
core
- Switch info_mask fields to be unsigned. Not clear why they were ever
signed.
- Fix handling of negative channel scale in iio_convert_raw_to_processed()
- Fix offset handling for channels without a scale attribute.
- Improve the precision of scaling slightly.
- Drop apparent handling of IIO_CHAN_INFO_PROCESSED for devices that don't
have any such channels.
various
- Drop many pm_runtime_mark_last_busy() calls now
pm_runtime_put_autosuspend() calls it internally.
- Drop dev_err_probe() calls where the error code is hard coded as -ENOMEM
as they don't do anything.
- Drop dev_err() calls where the error code is -ENOMEM. This will reduce
error prints, but memory failures generate a lot of messages anyway
so unlikely we need these prints.
current-sense-amplifier
- Add #io-channels property this channel to be used by a consumer driver.
adi,ad7124
- Fix incorrect clocks dt-binding property.
- Make the mclk clock optional in DT - this is internal to the ADC so should
never have been in he binding.
- Fix up sample rate to comply with ABI.
- Use read_avail() callback rather than opencoding similar.
- Deploy guard() to clean up some lock handling.
adi,ad7768
- Use devm_regulator_get_enable_read_voltage() to replace similar code.
adi,ad7816
- Drop an unnecessary dev_set_drvdata() call as nothing uses the data.
ad,adxl345
- Fix missing blank line before bullet list in documentation.
arm,scmi
- Use devm_kcalloc() for an array allocation rather than devm_kzalloc().
bosch,bmi270
- Match an ACPI ID seen in the wild. It is not spec compliant but we can't
do much about that.
bosch,bmp280
- Drop overly noisy dev_info()
- Allow for sleeping gpio controllers.
gogle,cros-ec
- Drop unused location attribute that has been replaced by label.
invense,icm42600
- Simplify the power management.
- Use guard() to simplify some locking.
maxim,max1238
- Add io-channel-cells property to dt-binding as there is an in tree
consumer.
microchip,mcp9600
- Specify a default value in dt-binding for the thermocouple type
- General whitespace cleanup.
samsung,exynos
- Drop support for the S3C2410 including bindings, and touchscreen support
as nothing else uses that.
- Drop platform ID based binding as not used.
st,vl53l0x
- Fix returning the wrong variable in an error path.
ti,pac1934
- Replace open coded devm_mutex_init().
xilinx,ams
- Update maintainers entry.
* tag 'iio-for-6.18a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (178 commits)
MAINTAINERS: Support ROHM BD79112 ADC
iio: adc: Support ROHM BD79112 ADC/GPIO
dt-bindings: iio: adc: ROHM BD79112 ADC/GPIO
iio: pressure: bmp280: Use gpiod_set_value_cansleep()
iio: pressure: bmp280: Remove noisy dev_info()
iio: ABI: add filter types for ad7173
iio: adc: ad7173: support changing filter type
iio: adc: ad7173: rename odr field
iio: adc: ad7173: rename ad7173_chan_spec_ext_info
iio: adc: Add driver for Marvell 88PM886 PMIC ADC
dt-bindings: mfd: 88pm886: Add #io-channel-cells
iio: ABI: document "sinc4+rej60" filter_type
iio: adc: ad7124: add filter support
iio: adc: ad7124: support fractional sampling_frequency
iio: adc: ad7124: use guard(mutex) to simplify return paths
iio: adc: ad7124: use read_avail() for scale_available
iio: adc: ad7124: use clamp()
iio: adc: ad7124: fix sample rate for multi-channel use
Documentation: ABI: iio: add sinc4+lp
docs: iio: add documentation for ade9000 driver
...
This pull request contains the interconnect changes for the 6.18-rc1
merge window. It contains new driver and a minor core cleanup.
Core change:
- Use device_match_of_node() instead of open coding it
Driver changes:
- Add new driver for the Qualcomm Glymur SoC
- Enable OSM L3 support for the QCS615 SoC
Signed-off-by: Georgi Djakov <djakov@kernel.org>
-----BEGIN PGP SIGNATURE-----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=SM2b
-----END PGP SIGNATURE-----
Merge tag 'icc-6.18-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc into char-misc-next
Georgi writes:
interconnect changes for 6.18
This pull request contains the interconnect changes for the 6.18-rc1
merge window. It contains new driver and a minor core cleanup.
Core change:
- Use device_match_of_node() instead of open coding it
Driver changes:
- Add new driver for the Qualcomm Glymur SoC
- Enable OSM L3 support for the QCS615 SoC
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-6.18-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
dt-bindings: interconnect: Add OSM L3 compatible for QCS615 SoC
interconnect: core: Use device_match_of_node()
interconnect: qcom: add glymur interconnect provider driver
interconnect: qcom: icc-rpmh: increase MAX_PORTS to support four QoS ports
dt-bindings: interconnect: document the RPMh Network-On-Chip interconnect in Glymur SoC
The driver uses drm_gem_shmem_prime_import_no_map() and
drm_gem_shmem_dumb_create(), but the Kconfig currently selects
DRM_GEM_DMA_HELPER instead of DRM_GEM_SHMEM_HELPER. This causes
link failures when DRM_GEM_SHMEM_HELPER is not enabled.
Select DRM_GEM_SHMEM_HELPER to fix the build.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202509220320.gfFZjmyg-lkp@intel.com/
Fixes: c9e70639f5 ("drm: tiny: Add support for Mayqueen Pixpaper e-ink panel")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: LiangCheng Wang <zaq14760@gmail.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250922-bar-v1-1-b2a1f54ace82@gmail.com
Following deadlock can be triggered easily by lockdep:
WARNING: possible circular locking dependency detected
6.17.0-rc3-00124-ga12c2658ced0 #1665 Not tainted
------------------------------------------------------
check/1334 is trying to acquire lock:
ff1100011d9d0678 (&q->sysfs_lock){+.+.}-{4:4}, at: blk_unregister_queue+0x53/0x180
but task is already holding lock:
ff1100011d9d00e0 (&q->q_usage_counter(queue)#3){++++}-{0:0}, at: del_gendisk+0xba/0x110
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&q->q_usage_counter(queue)#3){++++}-{0:0}:
blk_queue_enter+0x40b/0x470
blkg_conf_prep+0x7b/0x3c0
tg_set_limit+0x10a/0x3e0
cgroup_file_write+0xc6/0x420
kernfs_fop_write_iter+0x189/0x280
vfs_write+0x256/0x490
ksys_write+0x83/0x190
__x64_sys_write+0x21/0x30
x64_sys_call+0x4608/0x4630
do_syscall_64+0xdb/0x6b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #1 (&q->rq_qos_mutex){+.+.}-{4:4}:
__mutex_lock+0xd8/0xf50
mutex_lock_nested+0x2b/0x40
wbt_init+0x17e/0x280
wbt_enable_default+0xe9/0x140
blk_register_queue+0x1da/0x2e0
__add_disk+0x38c/0x5d0
add_disk_fwnode+0x89/0x250
device_add_disk+0x18/0x30
virtblk_probe+0x13a3/0x1800
virtio_dev_probe+0x389/0x610
really_probe+0x136/0x620
__driver_probe_device+0xb3/0x230
driver_probe_device+0x2f/0xe0
__driver_attach+0x158/0x250
bus_for_each_dev+0xa9/0x130
driver_attach+0x26/0x40
bus_add_driver+0x178/0x3d0
driver_register+0x7d/0x1c0
__register_virtio_driver+0x2c/0x60
virtio_blk_init+0x6f/0xe0
do_one_initcall+0x94/0x540
kernel_init_freeable+0x56a/0x7b0
kernel_init+0x2b/0x270
ret_from_fork+0x268/0x4c0
ret_from_fork_asm+0x1a/0x30
-> #0 (&q->sysfs_lock){+.+.}-{4:4}:
__lock_acquire+0x1835/0x2940
lock_acquire+0xf9/0x450
__mutex_lock+0xd8/0xf50
mutex_lock_nested+0x2b/0x40
blk_unregister_queue+0x53/0x180
__del_gendisk+0x226/0x690
del_gendisk+0xba/0x110
sd_remove+0x49/0xb0 [sd_mod]
device_remove+0x87/0xb0
device_release_driver_internal+0x11e/0x230
device_release_driver+0x1a/0x30
bus_remove_device+0x14d/0x220
device_del+0x1e1/0x5a0
__scsi_remove_device+0x1ff/0x2f0
scsi_remove_device+0x37/0x60
sdev_store_delete+0x77/0x100
dev_attr_store+0x1f/0x40
sysfs_kf_write+0x65/0x90
kernfs_fop_write_iter+0x189/0x280
vfs_write+0x256/0x490
ksys_write+0x83/0x190
__x64_sys_write+0x21/0x30
x64_sys_call+0x4608/0x4630
do_syscall_64+0xdb/0x6b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
other info that might help us debug this:
Chain exists of:
&q->sysfs_lock --> &q->rq_qos_mutex --> &q->q_usage_counter(queue)#3
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&q->q_usage_counter(queue)#3);
lock(&q->rq_qos_mutex);
lock(&q->q_usage_counter(queue)#3);
lock(&q->sysfs_lock);
Root cause is that queue_usage_counter is grabbed with rq_qos_mutex
held in blkg_conf_prep(), while queue should be freezed before
rq_qos_mutex from other context.
The blk_queue_enter() from blkg_conf_prep() is used to protect against
policy deactivation, which is already protected with blkcg_mutex, hence
convert blk_queue_enter() to blkcg_mutex to fix this problem. Meanwhile,
consider that blkcg_mutex is held after queue is freezed from policy
deactivation, also convert blkg_alloc() to use GFP_NOIO.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Turn on syncfs for all fuseblk servers so that the ones in the know can
flush cached intermediate data and logs to disk.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The CMT do a housekeeping such as dealing with runtime PM and
enable/disable clocks when either a clock source is enabled, or when a
new clock event is registered.
Doing this type of housekeeping for when a clock event is registered is
not always possible as it can happen in contexts where holding spinlocks
is not possible. However doing it when registering a clock source is
possible.
As a first step to address this design break apart the CMT start and
stop functions. The path for clock sources need not change, while the
one for clock events need to be reworked in future work.
There is no indented functional change, just breaking the two use-cases
controlled by a flag into two distinct functions.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20250910142657.1148696-2-niklas.soderlund+renesas@ragnatech.se
The current implementation of clps711x_timer_init() has multiple error
paths that directly return without releasing the base I/O memory mapped
via of_iomap(). Fix of_iomap leaks in error paths.
Fixes: 04410efbb6 ("clocksource/drivers/clps711x: Convert init function to return error")
Fixes: 2a6a8e2d90 ("clocksource/drivers/clps711x: Remove board support")
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250814123324.1516495-1-zhen.ni@easystack.cn
am43xx has a clock tree where the global timer clock is an indirect child
of the CPU clock used for frequency scaling:
dpll_mpu_ck -- CPU/cpufreq
|
v
dpll_mpu_m2_ck -- divider
|
v
mpu_periphclk -- fixed divider by 2 used for global timer
When CPU frequency changes, the global timer's clock notifier rejects
the change because the hardcoded prescaler (1 or 2) cannot accommodate
the frequency range across all CPU OPPs (300, 600, 720, 800, 1000 MHz).
Add platform-specific prescaler auto-detection to solve this issue:
- am43xx: prescaler = 50 (calculated as initial_freq/GCD of all OPP
freqs) This allows the timer to work across all CPU frequencies after
the fixed divider by 2. Tested on am4372-idk-evm.
- zynq-7000: prescaler = 2 (preserves previous Kconfig default)
- Other platforms: prescaler = 1 (previous default)
The Kconfig option now defaults to 0 (auto-detection) but can still
override the auto-detected value when set to a non-zero value,
preserving existing customization workflows.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
Tested-by: Judith Mendez <jm@ti.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20250819-topic-am43-arm-global-timer-v6-16-v2-1-6d082e2a5161@baylibre.com
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
appended to the "under-the-cut" portion of the patch.
While changes are being made to 'struct clk_ops', let's also go ahead
and fix the formatting of set_rate so that everything lines up as
expected.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20250810-clocksource-round-rate-v1-1-486ef53e45eb@redhat.com
While the main SoC PLL is responsible for the lexra bus frequency
it has no implications on the the timer divisior. Update the
comments accordingly.
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20250804080328.2609287-5-markus.stockhausen@gmx.de
During normal operation the timers are reprogrammed including an
interrupt acknowledgement. This has no effect as the whole timer
is setup from scratch afterwards. Especially in an interrupt this
has already been done by rttm_timer_interrupt().
Change the behaviour as follows:
- Use rttm_disable_timer() during reprogramming
- Keep rttm_stop_timer() for all other use cases.
Downstream has already tested and confirmed a patch. See
https://github.com/openwrt/openwrt/pull/19468https://forum.openwrt.org/t/support-for-rtl838x-based-managed-switches/57875/3788
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Stephen Howell <howels@allthatwemight.be>
Tested-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20250804080328.2609287-4-markus.stockhausen@gmx.de
NeilBrown <neilb@ownmail.net> says:
This is a re-re-revised selection of cleanups and API renaming which
continues my work to centralise locking of create/remove/rename
operations.
* patches from https://lore.kernel.org/20250922043121.193821-2-neilb@ownmail.net:
debugfs: rename start_creating() to debugfs_start_creating()
VFS: rename kern_path_locked() and related functions.
VFS/audit: introduce kern_path_parent() for audit
VFS: unify old_mnt_idmap and new_mnt_idmap in renamedata
VFS: discard err2 in filename_create()
VFS/ovl: add lookup_one_positive_killable()
Signed-off-by: Christian Brauner <brauner@kernel.org>
start_creating() is a generic name which I would like to use for a
function similar to simple_start_creating(), only not quite so simple.
debugfs is using this name which, though static, will cause complaints
if then name is given a different signature in a header file.
So rename it to debugfs_start_creating().
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Christian Brauner <brauner@kernel.org>
kern_path_locked() is now only used to prepare for removing an object
from the filesystem (and that is the only credible reason for wanting a
positive locked dentry). Thus it corresponds to kern_path_create() and
so should have a corresponding name.
Unfortunately the name "kern_path_create" is somewhat misleading as it
doesn't actually create anything. The recently added
simple_start_creating() provides a better pattern I believe. The
"start" can be matched with "end" to bracket the creating or removing.
So this patch changes names:
kern_path_locked -> start_removing_path
kern_path_create -> start_creating_path
user_path_create -> start_creating_user_path
user_path_locked_at -> start_removing_user_path_at
done_path_create -> end_creating_path
and also introduces end_removing_path() which is identical to
end_creating_path().
__start_removing_path (which was __kern_path_locked) is enhanced to
call mnt_want_write() for consistency with the start_creating_path().
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Christian Brauner <brauner@kernel.org>
audit_alloc_mark() and audit_get_nd() both need to perform a path
lookup getting the parent dentry (which must exist) and the final
target (following a LAST_NORM name) which sometimes doesn't need to
exist.
They don't need the parent to be locked, but use kern_path_locked() or
kern_path_locked_negative() anyway. This is somewhat misleading to the
casual reader.
This patch introduces a more targeted function, kern_path_parent(),
which returns not holding locks. On success the "path" will
be set to the parent, which must be found, and the return value is the
dentry of the target, which might be negative.
This will clear the way to rename kern_path_locked() which is
otherwise only used to prepare for removing something.
It also allows us to remove kern_path_locked_negative(), which is
transformed into the new kern_path_parent().
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Christian Brauner <brauner@kernel.org>
A rename operation can only rename within a single mount. Callers of
vfs_rename() must and do ensure this is the case.
So there is no point in having two mnt_idmaps in renamedata as they are
always the same. Only one of them is passed to ->rename in any case.
This patch replaces both with a single "mnt_idmap" and changes all
callers.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Since 204a575e91 "VFS: add common error checks to lookup_one_qstr_excl()"
filename_create() does not need to stash the error value from mnt_want_write()
into a separate variable - the logic that used to clobber 'error' after the
call of mnt_want_write() has migrated into lookup_one_qstr_excl().
So there is no need for two different err variables.
This patch discards "err2" and uses "error' throughout.
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Christian Brauner <brauner@kernel.org>
ovl wants a lookup which won't block on a fatal signal. It currently
uses down_write_killable() and then repeatedly calls to lookup_one()
The lock may not be needed if the name is already in the dcache and it
aids proposed future changes if the locking is kept internal to namei.c
So this patch adds lookup_one_positive_killable() which is like
lookup_one_positive() but will abort in the face of a fatal signal.
overlayfs is changed to use this.
Note that instead of always getting an exclusive lock, ovl now only gets
a shared lock, and only sometimes. The exclusive lock was never needed.
However down_read_killable() was only added in v4.15 but overlayfs started
using down_write_killable() here in v4.7.
Note that the linked list ->first_maybe_whiteout ->next_maybe_white is
local to the thread so there is no concurrency in that list which could
be threatened by removing the locking.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The current counter value is a read only register. It will be
reset when writing a new target timer value with rttm_set_period().
rttm_set_counter() is essentially a noop. Drop it.
While this makes rttm_start_timer() and rttm_enable_timer() the
same functions keep both to make the established abstraction layers
for register and control functions active.
Downstream has already tested and confirmed a patch. See
https://github.com/openwrt/openwrt/pull/19468https://forum.openwrt.org/t/support-for-rtl838x-based-managed-switches/57875/3788
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Stephen Howell <howels@allthatwemight.be>
Tested-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20250804080328.2609287-3-markus.stockhausen@gmx.de
The OpenWrt distribution has switched from kernel longterm 6.6 to
6.12. Reports show that devices with the Realtek Otto switch platform
die during operation and are rebooted by the watchdog. Sorting out
other possible reasons the Otto timer is to blame. The platform
currently consists of 4 targets with different hardware revisions.
It is not 100% clear which devices and revisions are affected.
Analysis shows:
A more aggressive sched/deadline handling leads to more timer starts
with small intervals. This increases the bug chances. See
https://marc.info/?l=linux-kernel&m=175276556023276&w=2
Focusing on the real issue a hardware limitation on some devices was
found. There is a minimal chance that a timer ends without firing an
interrupt if it is reprogrammed within the 5us before its expiration
time. Work around this issue by introducing a bounce() function. It
restarts the timer directly before the normal restart functions as
follows:
- Stop timer
- Restart timer with a slow frequency.
- Target time will be >5us
- The subsequent normal restart is outside the critical window
Downstream has already tested and confirmed a patch. See
https://github.com/openwrt/openwrt/pull/19468https://forum.openwrt.org/t/support-for-rtl838x-based-managed-switches/57875/3788
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Stephen Howell <howels@allthatwemight.be>
Tested-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20250804080328.2609287-2-markus.stockhausen@gmx.de
Add PWM capture function in DM timer driver.
OMAP DM timer hardware supports capture feature.It can be used to
timestamp events (falling/rising edges) detected on input signal.
Signed-off-by: Gokul Praveen <g-praveen@ti.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Link: https://lore.kernel.org/r/20250812105346.203541-1-g-praveen@ti.com
The MMIO driver can also double as a clocksource, something that was
missing in its previous incarnation. Add it for completeness.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20250814154622.10193-5-maz@kernel.org
Remove all the MMIO support from the per-CPU timer driver, and switch
over to the standalove driver.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20250814154622.10193-4-maz@kernel.org
Add a new driver for the MMIO side of the ARM architected timer.
Most of it has been lifted from the existing arch timer code,
massaged, and finally rewritten.
It supports both DT and ACPI as firmware descriptions.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20250814154622.10193-3-maz@kernel.org
In preparation for the MMIO timer support code becoming an actual
driver, mimic what is done for the SBSA watchdog and expose
a synthetic device for each MMIO timer block.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Sudeep Holla <sudeep.holla@arm.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20250807160243.1970533-2-maz@kernel.org
The previous changes put in place the encapsulation of the code in
order to allow multiple instances of the driver.
The S32G platform has two Periodic Interrupt Timer (PIT). The IP is
exactly the same as the VF platform.
Each PIT has four channels which are 32 bits wide and counting
down. The two first channels can be chained to implement a 64 bits
counter. The channel usage is kept unchanged with the original driver,
channel 2 is used as a clocksource, channel 3 is used as a
clockevent. Other channels are unused.
In order to support the S32G platform which has two PIT, we initialize
the timer and bind it to a CPU. The S32G platforms can have 2, 4 or 8
CPUs and this kind of configuration can appear unusual as we may endup
with two PIT used as a clockevent for the two first CPUs while the
other CPUs use the architected timers. However, in the context of the
automotive, the platform can be partioned to assign 2 CPUs for Linux
and the others CPUs to third party OS. The PIT is then used with their
specifities like the ability to freeze the time which is needed for
instance for debugging purpose.
The setup found for this platform is each timer instance is bound to
CPU0 and CPU1.
A counter is incremented when a timer is successfully initialized and
assigned to a CPU. This counter is used as an index for the CPU number
and to detect when we reach the maximum possible instances for the
platform. That in turn triggers the CPU hotplug callbacks to achieve
the per CPU setup. It is the exact same mechanism found in the NXP STM
driver.
If the timers must be bound to different CPUs, it would require an
additionnal mechanism which is not part of these changes.
Tested on a s32g274a-rdb2.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20250804152344.1109310-21-daniel.lezcano@linaro.org
The Vybrid Family is a NXP (formerly Freescale) platform having a
Programmable Interrupt Timer (PIT). This timer is an IP found also on
the NXP Automotive platform S32G2 and S32G3.
Add the compatible for those platforms to describe the timer.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250804152344.1109310-20-daniel.lezcano@linaro.org
The PIT acronym stands for Periodic Interrupt Timer which is found on
different NXP platforms not only on the Vybrid Family. Change the name
to be more generic for the NXP platforms in general. That will be
consistent with the NXP STM driver naming convention.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20250804152344.1109310-19-daniel.lezcano@linaro.org
The difference between the pit_clocksource_enable() and
pit_clocksource_disable() is only setting the TIF flag for the
clockevent. Let's group them and pass the TIF flag parameter to the
function so we save some lines of code. But as the base address is
different regarding if it is a clocksource or a clockevent, we pass
the base address in parameter instead of the struct pit_timer.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20250804152344.1109310-17-daniel.lezcano@linaro.org