Enable the first USB controller in device mode on the Lemans EVK
board and configure the associated LDO regulators to power
the PHYs accordingly.
The USB port is a Type-C port controlled by HD3SS3320 port controller.
The role switch notifications would need to be routed to glue driver by
adding an appropriate usb-c-connector node in DT. However in the design,
the vbus supply that is to be provided to connected peripherals when
port is configured as an DFP, is controlled by a GPIO.
There is also one ID line going from Port controller chip to GPIO-50 of
the SoC. As per the datasheet of HD3SS3320:
"Upon detecting a UFP device, HD3SS3220 will keep ID pin high if VBUS is
not at VSafe0V. Once VBUS is at VSafe0V, the HD3SS3220 will assert ID
pin low. This is done to enforce Type-C requirement that VBUS must be
at VSafe0V before re-enabling VBUS."
The current HD3SS3220 driver doesn't have this functionality present. So,
putting the first USB controller in device mode for now. Once the vbus
control based on ID pin is implemented in hd3ss3220.c, the
usb-c-connector will be implemented and dr mode would be made OTG.
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Wasim Nazir <wasim.nazir@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250916-lemans-evk-bu-v5-8-53d7d206669d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the Iris video codec accelerator on the Lemans EVK board
and reference the appropriate firmware required for its operation.
This allows hardware-accelerated video encoding and decoding using
the Iris codec engine.
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Wasim Nazir <wasim.nazir@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250916-lemans-evk-bu-v5-7-53d7d206669d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable remoteproc subsystems for supported DSPs such as Audio DSP,
Compute DSP-0/1 and Generic DSP-0/1, along with their corresponding
firmware.
Signed-off-by: Wasim Nazir <wasim.nazir@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250916-lemans-evk-bu-v5-6-53d7d206669d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable PCIe0 and PCIe1 along with the respective phy-nodes.
PCIe0 is routed to an m.2 E key connector on the mainboard for wifi
attaches while PCIe1 routes to a standard PCIe x4 expansion slot.
Signed-off-by: Sushrut Shree Trivedi <quic_sushruts@quicinc.com>
Signed-off-by: Wasim Nazir <wasim.nazir@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250916-lemans-evk-bu-v5-5-53d7d206669d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Integrate the GT24C256C EEPROM via I2C to enable access to
board-specific non-volatile data.
Also, define an nvmem-layout to expose structured regions within the
EEPROM, allowing consumers to retrieve configuration data such as
Ethernet MAC addresses via the nvmem subsystem.
Signed-off-by: Monish Chunara <quic_mchunara@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Wasim Nazir <wasim.nazir@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250916-lemans-evk-bu-v5-4-53d7d206669d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable GPI DMA controllers (gpi_dma0, gpi_dma1, gpi_dma2) and QUPv3
interfaces (qupv3_id_0, qupv3_id_2) in the device tree to support
DMA and peripheral communication on the Lemans EVK platform.
qupv3_id_0 provides access to I2C/SPI/UART instances 0-5.
qupv3_id_2 provides access to I2C/SPI/UART instances 14-20.
Signed-off-by: Viken Dadhaniya <viken.dadhaniya@oss.qualcomm.com>
Signed-off-by: Wasim Nazir <wasim.nazir@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250916-lemans-evk-bu-v5-2-53d7d206669d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Introduce the SDHC v5 controller node for the Lemans platform.
This controller supports either eMMC or SD-card, but only one
can be active at a time. SD-card is the preferred configuration
on Lemans targets, so describe this controller.
Define the SDC interface pins including clk, cmd, and data lines
to enable proper communication with the SDHC controller.
Signed-off-by: Monish Chunara <quic_mchunara@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Co-developed-by: Wasim Nazir <wasim.nazir@oss.qualcomm.com>
Signed-off-by: Wasim Nazir <wasim.nazir@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250916-lemans-evk-bu-v5-1-53d7d206669d@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The `kunit_test` proc macro only checks for the `test` attribute
immediately preceding a `fn`. If the function is disabled via a `cfg`,
the generated code would result in a compile error referencing a
non-existent function [1].
This collects attributes and specifically cherry-picks `cfg` attributes
to be duplicated inside KUnit wrapper functions such that a test function
disabled via `cfg` compiles and is marked as skipped in KUnit correctly.
Link: https://lore.kernel.org/r/20250916021259.115578-1-ent3rm4n@gmail.com
Link: https://lore.kernel.org/rust-for-linux/CANiq72==48=69hYiDo1321pCzgn_n1_jg=ez5UYXX91c+g5JVQ@mail.gmail.com/ [1]
Closes: https://github.com/Rust-for-Linux/linux/issues/1185
Suggested-by: Miguel Ojeda <ojeda@kernel.org>
Suggested-by: David Gow <davidgow@google.com>
Signed-off-by: Kaibo Ma <ent3rm4n@gmail.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add driver for Maxim Integrated MAX7360 keypad controller, providing
support for up to 64 keys, with a matrix of 8 columns and 8 rows.
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-8-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add driver for Maxim Integrated MAX7360 GPIO/GPO controller.
Two sets of GPIOs are provided by the device:
- Up to 8 GPIOs, shared with the PWM and rotary encoder functionalities.
These GPIOs also provide interrupts on input changes.
- Up to 6 GPOs, on unused keypad columns pins.
Co-developed-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-7-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Allows to populate the gpio_regmap_config structure with
init_valid_mask() callback to set on the final gpio_chip structure.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-6-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
GPIO controller often have support for IRQ: allow to easily allocate
both gpio-regmap and regmap-irq in one operation.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-5-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add driver for Maxim Integrated MAX7360 pinctrl on the PORT pins. Pins
can be used either for GPIO, PWM or rotary encoder functionalities.
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-3-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add core driver to support MAX7360 i2c chip, multi function device
with keypad, GPIO, PWM, GPO and rotary encoder submodules.
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Co-developed-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-2-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add device tree bindings for Maxim Integrated MAX7360 device with
support for keypad, rotary, gpios and pwm functionalities.
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Link: https://lore.kernel.org/r/20250824-mdb-max7360-support-v14-1-435cfda2b1ea@bootlin.com
Signed-off-by: Lee Jones <lee@kernel.org>
Translate .../security/ipe.rst into Chinese.
Update the translation through commit ac6731870e
("documentation: add IPE documentation")
Signed-off-by: Shuo Zhao <zhaoshuo@cqsoftware.com.cn>
Reviewed-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Signed-off-by: Alex Shi <alexs@kernel.org>
translate the "generic-hdlc.rst" into Simplified Chinese.
Update the translation through commit 16128ad8f9
("docs: networking: convert generic-hdlc.txt to ReST")
Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn>
Signed-off-by: Sun yuxi <sun.yuxi@zte.com.cn>
Reviewed-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Alex Shi <alexs@kernel.org>
translate the "skbuff.rst" into Simplified Chinese.
Update the translation through commit 9facd94114
("skbuff: render the checksum comment to documentation")
Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn>
Signed-off-by: Sun yuxi <sun.yuxi@zte.com.cn>
Reviewed-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Alex Shi <alexs@kernel.org>
translate the "mptcp-sysctl.rst" into Simplified Chinese.
Update the translation through commit fa3ee9dd80
("mptcp: sysctl: add available_path_managers")
Signed-off-by: Sun yuxi <sun.yuxi@zte.com.cn>
Reviewed-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Alex Shi <alexs@kernel.org>
This driver supports RTC functionality for NCT6694 MFD device
based on USB interface.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Ming Yu <a0282524688@gmail.com>
Link: https://lore.kernel.org/r/20250912091952.1169369-8-a0282524688@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
This driver supports Hardware monitor functionality for NCT6694 MFD
device based on USB interface.
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ming Yu <a0282524688@gmail.com>
Link: https://lore.kernel.org/r/20250912091952.1169369-7-a0282524688@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
This driver supports Watchdog timer functionality for NCT6694 MFD
device based on USB interface.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Ming Yu <a0282524688@gmail.com>
Link: https://lore.kernel.org/r/20250912091952.1169369-6-a0282524688@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
This driver supports Socket CANFD functionality for NCT6694 MFD
device based on USB interface.
Reviewed-by: Marc Kleine-Budde <mkl@pengutronix.de>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Ming Yu <a0282524688@gmail.com>
Link: https://lore.kernel.org/r/20250912091952.1169369-5-a0282524688@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
This driver supports I2C adapter functionality for NCT6694 MFD
device based on USB interface.
Each I2C controller uses the default baudrate of 100kHz, which
can be overridden via module parameters.
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Ming Yu <a0282524688@gmail.com>
Link: https://lore.kernel.org/r/20250912091952.1169369-4-a0282524688@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
This driver supports GPIO and IRQ functionality for NCT6694 MFD
device based on USB interface.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Ming Yu <a0282524688@gmail.com>
Link: https://lore.kernel.org/r/20250912091952.1169369-3-a0282524688@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
The Nuvoton NCT6694 provides an USB interface to the host to
access its features.
Sub-devices can use the USB functions nct6694_read_msg() and
nct6694_write_msg() to issue a command. They can also request
interrupt that will be called when the USB device receives its
interrupt pipe.
Signed-off-by: Ming Yu <a0282524688@gmail.com>
Link: https://lore.kernel.org/r/20250912091952.1169369-2-a0282524688@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add support for the regulators found in the SpacemiT P1 PMIC. This
PMIC provides 6 buck converters and 12 LDO regulators.
The PMIC is implemented as a multi-function device. These regulators
are probed based on this driver being named in a MFD cell in the simple
MFD I2C driver.
Signed-off-by: Alex Elder <elder@riscstar.com>
Link: https://patch.msgid.link/20250825172057.163883-4-elder@riscstar.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The audio codec IC is found on Qualcomm PM4125/PM2250 PMIC.
It has TX and RX soundwire slave devices hence two files are added.
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250915-pm4125_audio_codec_v1-v4-1-b247b64eec52@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Since new audio codec driver is added the get_maintainers script
should catch the new files.
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250915-pm4125_audio_codec_v1-v4-4-b247b64eec52@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The audio codec is found in Qualcomm PM2250/PM4125 PMICs and is used on
platforms like Qualcomm QCM2290. It has soundwire interface and
corresponding RX and TX slave devices.
It has only two input channels: HPH left and right. The line output (LO)
is linked to HPHL so the hardware has some limitations regarding concurrent
playback via HPH and LO for instance.
The codec driver also uses WCD MBCH framework. The MBHC functionality is
implemented in a minimalistic way to enable IRQs and avoid different
issues with IRQs.
Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Tested-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250915-pm4125_audio_codec_v1-v4-3-b247b64eec52@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
translate the "inotify.rst" into Simplified Chinese.
Update to commit de389cf08d47("docs: filesystems: convert inotify.txt to
ReST")
Signed-off-by: Wang Longjie <wang.longjie1@zte.com.cn>
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
Signed-off-by: Alex Shi <alexs@kernel.org>
translate the "dnotify.rst" into Simplified Chinese.
Update to commit b31763cff488("docs: filesystems: convert dnotify.txt to
ReST")
Signed-off-by: Wang Longjie <wang.longjie1@zte.com.cn>
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
Signed-off-by: Alex Shi <alexs@kernel.org>
translate the "gfs2-glocks.rst" into Simplified Chinese.
Update to commit 713f8834389f("gfs2: Get rid of emote_ok
checks")
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
Signed-off-by: yang tao <yang.tao172@zte.com.cn>
Signed-off-by: Alex Shi <alexs@kernel.org>
translate the "gfs2-uevents.rst" into Simplified Chinese.
Update to commit 5b7ac27a6e2c("docs: filesystems: convert
gfs2-uevents.txt to ReST")
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
Signed-off-by: yang tao <yang.tao172@zte.com.cn>
Signed-off-by: Alex Shi <alexs@kernel.org>
translate the "gfs2.rst" into Simplified Chinese.
Update to commit d9593868cd58("Documentation: Update
filesystems/gfs2.rst")
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
Signed-off-by: yang tao <yang.tao172@zte.com.cn>
Signed-off-by: Alex Shi <alexs@kernel.org>
translate the "ubifs-authentication.rst" into Simplified Chinese.
Update to commit d56b699d76d1("Documentation: Fix typos")
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
Signed-off-by: yang tao <yang.tao172@zte.com.cn>
Signed-off-by: Alex Shi <alexs@kernel.org>
translate the "ubifs.rst" into Simplified Chinese.
Update to commit 5f5cae9b0e81("Documentation: ubifs: Fix
compression idiom")
Signed-off-by: Shao Mingyin <shao.mingyin@zte.com.cn>
Signed-off-by: yang tao <yang.tao172@zte.com.cn>
Signed-off-by: Alex Shi <alexs@kernel.org>
The bridge returned by drm_bridge_get_next_bridge() is refcounted. Put it
when done. We need to ensure it is not put before either next_bridge or
next_bridge_state is in use, thus for simplicity use a cleanup action.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20250801-drm-bridge-alloc-getput-drm_bridge_get_next_bridge-v2-9-888912b0be13@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>