The 'syscall' argument of syscall_trace_enter() is immediately overwritten
before any real use and serves only as a local variable, so drop the
parameter.
No functional change intended.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260128031934.3906955-2-ruanjinjie@huawei.com
Currently the LS7A GMAC device tree node lacks a proper phy-handle
property pointing to the PHY node.
In addition, the phy-mode property specifies "rgmii" without any
internal delay information, which means the board trace needs to add 2ns
delay to the RGMII data lines; but that isn't known to happen on any
Loongson board. The ACPI-based initialization codepath, which is used on
LoongArch-based 3A5000 + 7A1000 hardwares, specifies "rgmii-id" phy
mode, which should be the one we are using.
Add the lacking phy-handle property and set proper phy-mode.
Tested on a LS3A4000_7A1000_NUC_BOARD_V2.1 board with YT8521S PHY.
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
This driver currently only supports builds against a PIC32 target. To
avoid future breakage in the future, let's update the Kconfig and the
driver so that it can be built with CONFIG_COMPILE_TEST enabled.
Note that with the existing asm calls is not how I'd want to do this
today if this was a new driver, however I don't have access to this
hardware. To avoid any breakage, let's keep the existing behavior.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
All users of the MIPS pic32.h asm header have been migrated to
linux/platform_data/pic32.h, so let's go ahead and drop the unused asm
variant.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use the linux/platform_data/pic32.h include instead of
asm/mach-pic32/pic32.h so that the asm variant can be dropped. This
is in preparation for allowing some drivers to be compiled on other
architectures with COMPILE_TEST enabled.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use the linux/platform_data/pic32.h include instead of
asm/mach-pic32/pic32.h so that the asm variant can be dropped. This
is in preparation for allowing some drivers to be compiled on other
architectures with COMPILE_TEST enabled.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use the linux/platform_data/pic32.h include instead of
asm/mach-pic32/pic32.h so that the asm variant can be dropped. This
is in preparation for allowing some drivers to be compiled on other
architectures with COMPILE_TEST enabled.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use the linux/platform_data/pic32.h include instead of
asm/mach-pic32/pic32.h so that the asm variant can be dropped. This
is in preparation for allowing some drivers to be compiled on other
architectures with COMPILE_TEST enabled.
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use the linux/platform_data/pic32.h include instead of
asm/mach-pic32/pic32.h so that the asm variant can be dropped. This
is in preparation for allowing some drivers to be compiled on other
architectures with COMPILE_TEST enabled.
Acked-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use the linux/platform_data/pic32.h include instead of
asm/mach-pic32/pic32.h so that the asm variant can be dropped. This
is in preparation for allowing some drivers to be compiled on other
architectures with COMPILE_TEST enabled.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use the linux/platform_data/pic32.h include instead of
asm/mach-pic32/pic32.h so that the asm variant can be dropped. This
is in preparation for allowing some drivers to be compiled on other
architectures with COMPILE_TEST enabled.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Acked-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use the linux/platform_data/pic32.h include instead of
asm/mach-pic32/pic32.h so that the asm variant can be dropped. This
is in preparation for allowing some drivers to be compiled on other
architectures with COMPILE_TEST enabled.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Acked-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use the linux/platform_data/pic32.h include instead of
asm/mach-pic32/pic32.h so that the asm variant can be dropped. This
is in preparation for allowing some drivers to be compiled on other
architectures with COMPILE_TEST enabled.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add the file include/linux/platform_data/pic32.h to the MIPS maintainer
entry.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
There are currently some pic32 MIPS drivers that are in tree, and are
only configured to be compiled on the pic32 platform. There's a risk of
breaking some of these drivers when migrating drivers away from legacy
APIs. It happened to me with a pic32 clk driver.
Let's go ahead and copy the MIPS pic32.h header to
include/linux/platform_data/, and make a minor update to allow compiling
this on other architectures. This will make it easier, and cleaner to
enable COMPILE_TEST for some of these pic32 drivers.
The asm variant of the header file will be dropped once all drivers have
been updated.
Link: https://lore.kernel.org/linux-clk/CABx5tq+eOocJ41X-GSgkGy6S+s+Am1yCS099wqP695NtwALTmg@mail.gmail.com/T/
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The linux/io.h include is not used, so let's drop it from pic32.h.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The pic32.h header file currently includes linux/io.h, however that
header is not actually used. The only header that's needed by this
C file is linux/types.h. Let's include it so that linux/io.h can be
dropped.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The pic32.h header includes linux/io.h, however nothing from that
include file is directly used by pic32.h. Several C files that
include pic32.h indirectly depend on linux/io.h, so let's go ahead
and add the missing include so that linux/io.h can be dropped from
pic32.h.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
CPU_HAS_LOAD_STORE_LR is not used anywhere in the kernel sources,
so drop it.
Fixes: 85c4354076 ("MIPS: loongson32: Switch to generic core")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Keguang Zhang <keguang.zhang@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The arch definition of cpumask_of_node() cannot handle NUMA_NO_NODE - which
is a valid index - so add a check for this.
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Macronix serial NAND devices with continuous read support do not
clear the configuration register on soft reset and lack a hardware
reset pin. When continuous read is interrupted (e.g., during reboot),
the feature remains enabled at the device level.
With continuous read enabled, the OOB area becomes inaccessible and
all reads are instead directed to the main area. As a result, during
partition allocation as part of MTD device registration, the first two
bytes of the main area for the master block are read and indicate that
the block is bad. This process repeats for every subsequent block for
the partition.
All reads and writes that reference the BBT find no good blocks and
fail.
The only paths for recovery from this state are triggering the
continuous read feature by way of raw MTD reads or through a NAND
device power drain.
Disable continuous read explicitly during spinand probe to ensure
quiescent feature state.
Fixes: 631cfdd052 ("mtd: spi-nand: Add continuous read support")
Cc: stable@vger.kernel.org
Signed-off-by: David LaPorte <dalaport@amazon.com>
Reviewed-by: Gunnar Kudrjavets <gunnarku@amazon.com>
Reviewed-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The devm_gpiod_get_optional() function may return an error pointer
(ERR_PTR) in case of a genuine failure during GPIO acquisition,
not just NULL which indicates the legitimate absence of an optional
GPIO.
Add an IS_ERR() check after the function call to catch such errors and
propagate them to the probe function, ensuring the driver fails to load
safely rather than proceeding with an invalid pointer.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20260130091904.3426149-1-nichen@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that all other accesses to curr_xfer are done under the lock,
protect the curr_xfer NULL check in tegra_qspi_isr_thread() with the
spinlock. Without this protection, the following race can occur:
CPU0 (ISR thread) CPU1 (timeout path)
---------------- -------------------
if (!tqspi->curr_xfer)
// sees non-NULL
spin_lock()
tqspi->curr_xfer = NULL
spin_unlock()
handle_*_xfer()
spin_lock()
t = tqspi->curr_xfer // NULL!
... t->len ... // NULL dereference!
With this patch, all curr_xfer accesses are now properly synchronized.
Although all accesses to curr_xfer are done under the lock, in
tegra_qspi_isr_thread() it checks for NULL, releases the lock and
reacquires it later in handle_cpu_based_xfer()/handle_dma_based_xfer().
There is a potential for an update in between, which could cause a NULL
pointer dereference.
To handle this, add a NULL check inside the handlers after acquiring
the lock. This ensures that if the timeout path has already cleared
curr_xfer, the handler will safely return without dereferencing the
NULL pointer.
Fixes: b4e002d8a7 ("spi: tegra210-quad: Fix timeout handling")
Signed-off-by: Breno Leitao <leitao@debian.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260126-tegra_xfer-v2-6-6d2115e4f387@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Protect the curr_xfer clearing in tegra_qspi_non_combined_seq_xfer()
with the spinlock to prevent a race with the interrupt handler that
reads this field to check if a transfer is in progress.
Fixes: b4e002d8a7 ("spi: tegra210-quad: Fix timeout handling")
Signed-off-by: Breno Leitao <leitao@debian.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260126-tegra_xfer-v2-5-6d2115e4f387@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The curr_xfer field is read by the IRQ handler without holding the lock
to check if a transfer is in progress. When clearing curr_xfer in the
combined sequence transfer loop, protect it with the spinlock to prevent
a race with the interrupt handler.
Protect the curr_xfer clearing at the exit path of
tegra_qspi_combined_seq_xfer() with the spinlock to prevent a race
with the interrupt handler that reads this field.
Without this protection, the IRQ handler could read a partially updated
curr_xfer value, leading to NULL pointer dereference or use-after-free.
Fixes: b4e002d8a7 ("spi: tegra210-quad: Fix timeout handling")
Signed-off-by: Breno Leitao <leitao@debian.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260126-tegra_xfer-v2-4-6d2115e4f387@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When the timeout handler processes a completed transfer and signals
completion, the transfer thread can immediately set up the next transfer
and assign curr_xfer to point to it.
If a delayed ISR from the previous transfer then runs, it checks if
(!tqspi->curr_xfer) (currently without the lock also -- to be fixed
soon) to detect stale interrupts, but this check passes because
curr_xfer now points to the new transfer. The ISR then incorrectly
processes the new transfer's context.
Protect the curr_xfer assignment with the spinlock to ensure the ISR
either sees NULL (and bails out) or sees the new value only after the
assignment is complete.
Fixes: 921fc1838f ("spi: tegra210-quad: Add support for Tegra210 QSPI controller")
Signed-off-by: Breno Leitao <leitao@debian.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260126-tegra_xfer-v2-3-6d2115e4f387@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the assignment of the transfer pointer from curr_xfer inside the
spinlock critical section in both handle_cpu_based_xfer() and
handle_dma_based_xfer().
Previously, curr_xfer was read before acquiring the lock, creating a
window where the timeout path could clear curr_xfer between reading it
and using it. By moving the read inside the lock, the handlers are
guaranteed to see a consistent value that cannot be modified by the
timeout path.
Fixes: 921fc1838f ("spi: tegra210-quad: Add support for Tegra210 QSPI controller")
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260126-tegra_xfer-v2-2-6d2115e4f387@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When the ISR thread wakes up late and finds that the timeout handler
has already processed the transfer (curr_xfer is NULL), return
IRQ_HANDLED instead of IRQ_NONE.
Use a similar approach to tegra_qspi_handle_timeout() by reading
QSPI_TRANS_STATUS and checking the QSPI_RDY bit to determine if the
hardware actually completed the transfer. If QSPI_RDY is set, the
interrupt was legitimate and triggered by real hardware activity.
The fact that the timeout path handled it first doesn't make it
spurious. Returning IRQ_NONE incorrectly suggests the interrupt
wasn't for this device, which can cause issues with shared interrupt
lines and interrupt accounting.
Fixes: b4e002d8a7 ("spi: tegra210-quad: Fix timeout handling")
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://patch.msgid.link/20260126-tegra_xfer-v2-1-6d2115e4f387@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver supports the Radisys 82600 embedded chipset, which was used with
Pentium III-era CPUs. It is highly unlikely that it is still used. Besides
its own documentation, the only information I was able to find about the
R82600, after looking through many pages of Google results, was that it was
used in a Nokia 2G GSM base station.
The original author said:
"This was after Bluesmoke (watch was out-of-tree), and was pay of the first
set of in tree edac drivers (a fresh design as far as I remember).
This particular driver did apparently get used by Akamai quite heavily and
widely but all ancient history now. The Radisys r82600 edac driver
r82600_edac.c was closely related hardware from the same era, and can probably
go too (although being embedded hardware, it's possible its production
lifespan was considerably longer).
Tim."
Mail is
https://lore.kernel.org/r/01BCCA37-F6A2-458B-BFE7-99C7724CDDEA@buttersideup.com
but lkml drops html mail so quoting the relevant info here too.
[ bp: Massage and extend commit message. ]
Signed-off-by: Ethan Nelson-Moore <enelsonmoore@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://patch.msgid.link/20260130052633.13119-1-enelsonmoore@gmail.com
The inline data buffer head (dibh) is being released prematurely in
gfs2_iomap_begin() via release_metapath() while iomap->inline_data
still points to dibh->b_data. This causes a use-after-free when
iomap_write_end_inline() later attempts to write to the inline data
area.
The bug sequence:
1. gfs2_iomap_begin() calls gfs2_meta_inode_buffer() to read inode
metadata into dibh
2. Sets iomap->inline_data = dibh->b_data + sizeof(struct gfs2_dinode)
3. Calls release_metapath() which calls brelse(dibh), dropping refcount
to 0
4. kswapd reclaims the page (~39ms later in the syzbot report)
5. iomap_write_end_inline() tries to memcpy() to iomap->inline_data
6. KASAN detects use-after-free write to freed memory
Fix by storing dibh in iomap->private and incrementing its refcount
with get_bh() in gfs2_iomap_begin(). The buffer is then properly
released in gfs2_iomap_end() after the inline write completes,
ensuring the page stays alive for the entire iomap operation.
Note: A C reproducer is not available for this issue. The fix is based
on analysis of the KASAN report and code review showing the buffer head
is freed before use.
[agruenba: Take buffer head reference in gfs2_iomap_begin() to avoid
leaks in gfs2_iomap_get() and gfs2_iomap_alloc().]
Reported-by: syzbot+ea1cd4aa4d1e98458a55@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ea1cd4aa4d1e98458a55
Fixes: d0a22a4b03 ("gfs2: Fix iomap write page reclaim deadlock")
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Add support for ML-DSA keys and signatures to the CMS/PKCS#7 and X.509
implementations. ML-DSA-44, -65 and -87 are all supported. For X.509
certificates, the TBSCertificate is required to be signed directly; for
CMS, direct signing of the data is preferred, though use of SHA512 (and
only that) as an intermediate hash of the content is permitted with
signedAttrs.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Lukas Wunner <lukas@wunner.de>
cc: Ignat Korchagin <ignat@cloudflare.com>
cc: Stephan Mueller <smueller@chronox.de>
cc: Eric Biggers <ebiggers@kernel.org>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: keyrings@vger.kernel.org
cc: linux-crypto@vger.kernel.org
Allow the data to be verified in a PKCS#7 or CMS message to be passed
directly to an asymmetric cipher algorithm (e.g. ML-DSA) if it wants to do
whatever passes for hashing/digestion itself. The normal digestion of the
data is then skipped as that would be ignored unless another signed info in
the message has some other algorithm that needs it.
The 'data to be verified' may be the content of the PKCS#7 message or it
will be the authenticatedAttributes (signedAttrs if CMS), modified, if
those are present.
This is done by:
(1) Make ->m and ->m_size point to the data to be verified rather than
making public_key_verify_signature() access the data directly. This
is so that keyctl(KEYCTL_PKEY_VERIFY) will still work.
(2) Add a flag, ->algo_takes_data, to indicate that the verification
algorithm wants to access the data to be verified directly rather than
having it digested first.
(3) If the PKCS#7 message has authenticatedAttributes (or CMS
signedAttrs), then the digest contained therein will be validated as
now, and the modified attrs blob will either be digested or assigned
to ->m as appropriate.
(4) If present, always copy and modify the authenticatedAttributes (or
signedAttrs) then digest that in one go rather than calling the shash
update twice (once for the tag and once for the rest).
(5) For ML-DSA, point ->m to the TBSCertificate instead of digesting it
and using the digest.
Note that whilst ML-DSA does allow for an "external mu", CMS doesn't yet
have that standardised.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Lukas Wunner <lukas@wunner.de>
cc: Ignat Korchagin <ignat@cloudflare.com>
cc: Stephan Mueller <smueller@chronox.de>
cc: Eric Biggers <ebiggers@kernel.org>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: keyrings@vger.kernel.org
cc: linux-crypto@vger.kernel.org
Rename ->digest and ->digest_len to ->m and ->m_size to represent the input
to the signature verification algorithm, reflecting that ->digest may no
longer actually *be* a digest.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
cc: Lukas Wunner <lukas@wunner.de>
cc: Ignat Korchagin <ignat@cloudflare.com>
cc: Stephan Mueller <smueller@chronox.de>
cc: Eric Biggers <ebiggers@kernel.org>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: keyrings@vger.kernel.org
cc: linux-crypto@vger.kernel.org
Calculate the SHA256 hash for blacklisting purposes independently of the
signature hash (which may be something other than SHA256).
This is necessary because when ML-DSA is used, no digest is calculated.
Note that this represents a change of behaviour in that the hash used for
the blacklist check would previously have been whatever digest was used
for, say, RSA-based signatures. It may be that this is inadvisable.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
cc: Lukas Wunner <lukas@wunner.de>
cc: Ignat Korchagin <ignat@cloudflare.com>
cc: Stephan Mueller <smueller@chronox.de>
cc: Eric Biggers <ebiggers@kernel.org>
cc: Herbert Xu <herbert@gondor.apana.org.au>
cc: keyrings@vger.kernel.org
cc: linux-crypto@vger.kernel.org
Now that there is support for creating a GICv5-based guest with KVM,
check that the hardware itself supports virtualisation, skipping the
setting of struct gic_kvm_info if not.
Note: If native GICv5 virt is not supported, then nor is
FEAT_GCIE_LEGACY, so we are able to skip altogether.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260128175919.3828384-33-sascha.bischoff@arm.com
[maz: cosmetic changes]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Different GIC types require the private IRQs to be initialised
differently. GICv5 is the culprit as it supports both a different
number of private IRQs, and all of these are PPIs (there are no
SGIs). Moreover, as GICv5 uses the top bits of the interrupt ID to
encode the type, the intid also needs to computed differently.
Up until now, the GIC model has been set after initialising the
private IRQs for a VCPU. Move this earlier to ensure that the GIC
model is available when configuring the private IRQs. While we're at
it, also move the setting of the in_kernel flag and implementation
revision to keep them grouped together as before.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260128175919.3828384-7-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The GICv5 architecture is dropping the ICC_HAPR_EL1 and ICV_HAPR_EL1
system registers. These registers were never added to the sysregs, but
the traps for them were.
Drop the trap bit from the ICH_HFGRTR_EL2 and make it Res1 as per the
upcoming GICv5 spec change. Additionally, update the EL2 setup code to
not attempt to set that bit.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260128175919.3828384-4-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
The VGIC-v3 code relied on hand-written definitions for the
ICH_VMCR_EL2 register. This register, and the associated fields, is
now generated as part of the sysreg framework. Move to using the
generated definitions instead of the hand-written ones.
There are no functional changes as part of this change.
Signed-off-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Link: https://patch.msgid.link/20260128175919.3828384-3-sascha.bischoff@arm.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
ops->write_waveform is already known to be non-NULL so there is
no need to check it a second time.
The superflous check was introduced in commit 17e40c2515
("pwm: New abstraction for PWM waveforms").
Signed-off-by: Ben Zong-You Xie <ben717@andestech.com>
Link: https://patch.msgid.link/20260129-fix-pwm-ops-check-v1-1-6f0b7952c875@andestech.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Seems that it was missed when MDCR_EL2 was first added to the trap
forwarding infrastructure. Add it back.
Fixes: cb31632c44 ("KVM: arm64: nv: Add trap forwarding for MDCR_EL2")
Signed-off-by: Zenghui Yu (Huawei) <zenghui.yu@linux.dev>
Link: https://patch.msgid.link/20260130094435.39942-1-zenghui.yu@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
Add counters of read, write and zone_reset operations as well as
GC written bytes to sysfs. This way they can be easily used for
monitoring tools and test cases.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Make this counter naming consistent with all the others.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Add a new errortag to test that zone reset errors are handled correctly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Include the actual bio submission in the common zone reset handler to
share more code and prepare for adding error injection for zone reset.
Note the I plan to refactor the block layer submit_bio_wait and
bio_await_chain code in the next merge window to remove some of the
code duplication added here.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Discard are not usually sync when issued from zoned garbage collection,
so drop the REQ_SYNC flag.
Fixes: 080d01c41d ("xfs: implement zoned garbage collection")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Add an errortag mount option that enables an errortag with the default
injection frequency. This allows injecting errors into the mount
process instead of just on live file systems, and thus test mount
error handling.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
There is no synchronization for updating m_errortag, which is fine as
it's just a debug tool. It would still be nice to fully avoid the
theoretical case of torn values, so use WRITE_ONCE and READ_ONCE to
access the members.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Mirror what is done for the more common XFS_ERRORTAG_TEST version,
and also only look at the error tag value once now that we can
easily have a local variable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hans Holmberg <hans.holmberg@wdc.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
