of_find_node_by_path() returns a node pointer with
refcount incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes: eac1e731b5 ("powerpc/xive: guest exploitation of the XIVE interrupt controller")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220605053225.56125-1-linmq006@gmail.com
of_find_node_by_path() returns remote device nodepointer with
refcount incremented, we should use of_node_put() on it when done.
Add missing of_node_put() to avoid refcount leak.
Fixes: 0afacde3df ("[POWERPC] spufs: allow isolated mode apps by starting the SPE loader")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220603121543.22884-1-linmq006@gmail.com
Commit 6320e693d9 ("powerpc/perf: Add support for caps under sysfs in
powerpc") added support for caps under sysfs in powerpc. This added caps
directory to: /sys/bus/event_source/devices/cpu/ for power8, power9,
power10 and generic compat PMU in respective PMU driver code.
For power10, it is added under "power10_pmu_attr_groups". But
for DD1 version, attr_groups are defined under dd1 array:
"power10_pmu_attr_groups_dd1". Since caps is not added for DD1,
it fails to include "cpu/caps" in DD1 model.
The issue was observed while booting power10 pseries with qemu version
6, but not observed with qemu version 7. This is because qemu version 7
uses a DD 2.0 CPU model.
Below is the trace log:
Can't update unknown attr grp name: cpu/caps^M
------------[ cut here ]------------^M
Failed to register pmu: cpu, reason -22^M
WARNING: CPU: 1 PID: 1 at kernel/events/core.c:13427 perf_event_sysfs_init+0xbc/0x108^M
Modules linked in:^M
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.19.0-rc2-00111-g6320e693d98c #148^M
NIP: c0000000020391f4 LR: c0000000020391f0 CTR: c0000000008c9c30^M
REGS: c0000000044c38c0 TRAP: 0700 Not tainted (5.19.0-rc2-00111-g6320e693d98c)^M
MSR: 8000000002029033 <SF,VEC,EE,ME,IR,DR,RI,LE> CR: 48000281 XER: 20040000^M
CFAR: c00000000013feac IRQMASK: 0 ^M
GPR00: c0000000020391f0 c0000000044c3b60 c00000000283db00 0000000000000027 ^M
GPR04: 80000000ffffe0a8 0000000000000000 0000000000000004 00000000fdcd0000 ^M
GPR08: 0000000000000027 c0000000ffe07e08 0000000000000001 0000000000000000 ^M
GPR12: c00000000035dd90 c0000000fffff300 c000000000012478 0000000000000000 ^M
GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ^M
GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ^M
GPR24: c000000002003480 0000000000000007 c0000000012a78d0 c000000001170a80 ^M
GPR28: c0000000026c4df8 c0000000026c4e68 0000000000000000 c0000000025a8628 ^M
NIP [c0000000020391f4] perf_event_sysfs_init+0xbc/0x108^M
LR [c0000000020391f0] perf_event_sysfs_init+0xb8/0x108^M
Call Trace:^M
[c0000000044c3b60] [c0000000020391f0] perf_event_sysfs_init+0xb8/0x108 (unreliable)^M
[c0000000044c3bf0] [c000000000011ec4] do_one_initcall+0x64/0x2d0^M
[c0000000044c3cd0] [c0000000020049fc] kernel_init_freeable+0x338/0x3e0^M
[c0000000044c3db0] [c0000000000124a0] kernel_init+0x30/0x1a0^M
[c0000000044c3e10] [c00000000000cd54] ret_from_kernel_thread+0x5c/0x64^M
Instruction dump:^M
813f0038 2c090000 4180002c 7fe3fb78 4a3280c5 2c030000 7c651b78 41820018 ^M
e89f0030 7f63db78 4a106c59 60000000 <0fe00000> ebff0000 4bffffb4 39200001 ^M
---[ end trace 0000000000000000 ]---^M
Fix it by adding caps for dd1 attr_groups in power10 PMU driver.
Fixes: 6320e693d9 ("powerpc/perf: Add support for caps under sysfs in powerpc")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
[mpe: Update change log to mention qemu 7 DD2.0 CPU model]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220728163746.85062-1-atrajeev@linux.vnet.ibm.com
These tests are based on test_stat_user_read in
tools/lib/perf/tests/test-evsel.c.
The tests are modified to skip if perf_event_open fails or rdpmc isn't
supported.
Committer testing:
⬢[acme@toolbox perf]$ perf test "mmap interface"
4: mmap interface tests :
4.1: Read samples using the mmap interface : Skip (permissions)
⬢[acme@toolbox perf]$
[root@five ~]# perf test "mmap interface"
4: mmap interface tests :
4.1: Read samples using the mmap interface : Ok
[root@five ~]#
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20220719223946.176299-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This test has been superseded by test_stat_user_read in:
tools/lib/perf/tests/test-evsel.c
The updated test doesn't divide-by-0 when running time of a counter is
0. It also supports ARM64.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20220719223946.176299-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The only sensible exponent for a boolean stat is 0. Add a test assertion
requiring all boolean statistics to have an exponent of 0.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Message-Id: <20220719143134.3246798-4-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As it turns out, tests sometimes fail. When that is the case, packing
the test assertion with as much relevant information helps track down
the problem more quickly.
Sharpen up the stat descriptor assertions in kvm_binary_stats_test to
more precisely describe the reason for the test assertion and which
stat is to blame.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Message-Id: <20220719143134.3246798-3-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to provide more useful test assertions that describe the broken
stats descriptor, perform sanity check on the stat name before any other
descriptor field. While at it, avoid dereferencing the name field if the
sanity check fails as it is more likely to contain garbage.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Message-Id: <20220719143134.3246798-2-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Dimitris Michailidis says:
====================
net/funeth: Tx support for XDP with frags
Support XDP with fragments for XDP_TX and ndo_xdp_xmit.
The first three patches rework existing code used by the skb path to
make it suitable also for XDP. With these all the callees of the main
Tx XDP function, fun_xdp_tx(), are fragment-capable. The last patch
updates fun_xdp_tx() to handle fragments.
====================
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
By now all the functions fun_xdp_tx() calls are shared with the skb path
and thus are fragment-capable. Update fun_xdp_tx(), that up to now has
been passing just one buffer, to check for fragments and call
accordingly. This makes XDP_TX and ndo_xdp_xmit fragment-capable.
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of passing an skb to the mapping function pass an
skb_shared_info plus an additional address/length pair. This makes it
usable for both skbs and XDP. Call it from the XDP path and adjust the
skb path.
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extract the Tx gather list writing code that skbs use into a utility
function and use it also for XDP.
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current XDP unmapping is a subset of its skb analog, dealing with
only one buffer. In preparation for multi-frag XDP rename the skb
function and use it also for XDP. The XDP version is removed.
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The last use of 'pfn' went away with the same-named argument to
host_pfn_mapping_level; now that the hugepage level is obtained
exclusively from the host page tables, kvm_mmu_zap_collapsible_spte
does not need to know host pfns at all.
Fixes: a8ac499bb6 ("KVM: x86/mmu: Don't require refcounted "struct page" to create huge SPTEs")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Jiri Pirko says:
====================
net: devlink: allow parallel commands on multiple devlinks
Aim of this patchset is to remove devlink_mutex and eventually to enable
parallel ops on devlink netlink interface.
====================
Tested-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
As the devlink_mutex was removed and all devlink instances are protected
individually by devlink->lock mutex, allow the netlink ops to run
in parallel and therefore allow user to execute commands on multiple
devlink instances simultaneously.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All accesses to devlink structure from userspace and drivers are locked
with devlink->lock instance mutex. Also, devlinks xa_array iteration is
taken care of by iteration helpers taking devlink reference.
Therefore, remove devlink_mutex as it is no longer needed.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert reload command to behave the same way as the rest of the
commands and let if be called with devlink->lock held. Remove the
temporary devl_lock taking from drivers. As the DEVLINK_NL_FLAG_NO_LOCK
flag is no longer used, remove it alongside.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add new mark called "unregistering" to be set at the beginning of
devlink_unregister() function. Check this mark during devlinks
iteration in order to prevent getting a reference of devlink which is
being currently unregistered.
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
__udp_sysctl_init() is called for init_net via udp_sysctl_ops.
While at it, we can rename __udp_sysctl_init() to udp_sysctl_init().
Fixes: 1e80295158 ("udp: Move the udp sysctl to namespace.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-07-29
This series contains updates to iavf driver only.
Przemyslaw prevents setting of TC max rate below minimum supported values
and reports updated queue values when setting up TCs.
---
v2: Dropped patch 3 (hw-tc-offload check)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
If 'local_odp_mr->r_trans_private' is a error code,
it is better to print the error code than to print
the value of IS_ERR().
Signed-off-by: Li Qiong <liqiong@nfschina.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEBsvAIBsPu6mG7thcrX5LkNig010FAmLm0csTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRCtfkuQ2KDTXT7jB/oDrk0sWDrGWTyi+XvCHpeA/6V7Sv5a
R9dK+yqgCI8vtlTJiv+Einqja30DF3V927GWuhgZaUmLcIhCIyrStoBcUN7WYgu1
vuu5z67AoHmcwnfgftf2vzqMQ5yAt+G2z2AbH0Wo8Q7dM0ubJTyE0JtLDjLO07IQ
wTTrfygbCANypyipPM5Bvjf17oXCma8rzYsQHKjbA/M5ElTdjNPT2mU+5WTgxTJr
m9QsVsRI6nzqYTtblYjDJMO9OEnJxjddYqehPwtoDp2PtquiWBoZBoa/4mcf49da
ufCbp2Fcow8Q77ajRJniHpVcjMIWlFDmP2M3ViXQ4yzsfOKly/VmuPdn
=qVIR
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-5.20-20220731' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2022-07-31
this is a pull request of 36 patches for net-next/master.
The 1st patch is by me and fixes a typo in the mcp251xfd driver.
Vincent Mailhol contributes a series of 9 patches, which clean up the
drivers to make use of KBUILD_MODNAME instead of hard coded names and
remove DRV_VERSION.
Followed by 3 patches by Vincent Mailhol that directly set the
ethtool_ops in instead of calling a function in the slcan, c_can and
flexcan driver.
Vincent Mailhol contributes a KBUILD_MODNAME and pr_fmt cleanup patch
for the slcan driver. Dario Binacchi contributes 6 patches to clean up
the driver and remove the legacy driver infrastructure.
The next 14 patches are by Vincent Mailhol and target the various
drivers, they add ethtool support and reporting of timestamping
capabilities.
Another patch by Vincent Mailhol for the etas_es58x driver to remove
useless calls to usb_fill_bulk_urb().
The last patch is by Christophe JAILLET and fixes a broken link to
Documentation in the can327 driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
KVM/arm64 updates for 5.20:
- Unwinder implementations for both nVHE modes (classic and
protected), complete with an overflow stack
- Rework of the sysreg access from userspace, with a complete
rewrite of the vgic-v3 view to allign with the rest of the
infrastructure
- Disagregation of the vcpu flags in separate sets to better track
their use model.
- A fix for the GICv2-on-v3 selftest
- A small set of cosmetic fixes
KVM/s390, KVM/x86 and common infrastructure changes for 5.20
x86:
* Permit guests to ignore single-bit ECC errors
* Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit (detect microarchitectural hangs) for Intel
* Cleanups for MCE MSR emulation
s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to use TAP interface
* enable interpretive execution of zPCI instructions (for PCI passthrough)
* First part of deferred teardown
* CPU Topology
* PV attestation
* Minor fixes
Generic:
* new selftests API using struct kvm_vcpu instead of a (vm, id) tuple
x86:
* Use try_cmpxchg64 instead of cmpxchg64
* Bugfixes
* Ignore benign host accesses to PMU MSRs when PMU is disabled
* Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
* x86/MMU: Allow NX huge pages to be disabled on a per-vm basis
* Port eager page splitting to shadow MMU as well
* Enable CMCI capability by default and handle injected UCNA errors
* Expose pid of vcpu threads in debugfs
* x2AVIC support for AMD
* cleanup PIO emulation
* Fixes for LLDT/LTR emulation
* Don't require refcounted "struct page" to create huge SPTEs
x86 cleanups:
* Use separate namespaces for guest PTEs and shadow PTEs bitmasks
* PIO emulation
* Reorganize rmap API, mostly around rmap destruction
* Do not workaround very old KVM bugs for L0 that runs with nesting enabled
* new selftests API for CPUID
It should unlock 'tcon->tc_lock' before return from cifs_tree_connect().
Fixes: fe67bd563ec2 ("cifs: avoid use of global locks for high contention data")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
During analysis of multichannel perf, it was seen that
the global locks cifs_tcp_ses_lock and GlobalMid_Lock, which
were shared between various data structures were causing a
lot of contention points.
With this change, we're breaking down the use of these locks
by introducing new locks at more granular levels. i.e.
server->srv_lock, ses->ses_lock and tcon->tc_lock to protect
the unprotected fields of server, session and tcon structs;
and server->mid_lock to protect mid related lists and entries
at server level.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Removed remaining warnings related to externs. These warnings
although harmless could be distracting e.g.
fs/cifs/cifsfs.c: note: in included file:
fs/cifs/cifsglob.h:1968:24: warning: symbol 'sesInfoAllocCount' was not declared. Should it be static?
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Replace list_for_each() by list_for_each_entr() where appropriate.
Remove no longer used list_head stack variables.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
And also correct the URL for the project web site.
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
If the command is SMB2_IOCTL, OutputLength and OutputContext are
optional and can be zero, so return early and skip calculated length
check.
Move the mismatched length message to the end of the check, to avoid
unnecessary logs when the check was not a real miscalculation.
Also change the pr_warn_once() to a pr_warn() so we're sure to get a
log for the real mismatches.
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
If we hit the 'index == next_cached' case, we leak a refcount on the
struct page. Fix this by using readahead_folio() which takes care of
the refcount for you.
Fixes: 0174ee9947 ("cifs: Implement cache I/O by accessing the cache directly")
Cc: David Howells <dhowells@redhat.com>
Cc: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The build warning:
warning: symbol 'cifs_tcp_ses_lock' was not declared. Should it be static?
can be distracting. Fix two of these.
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Remove warnings for five global variables. For example:
fs/cifs/cifsglob.h:1984:24: warning: symbol 'midCount' was not declared. Should it be static?
Also change them from camelCase (e.g. "midCount" to "mid_count")
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Variable mnt_sign_enabled is being initialized with a value that
is never read, it is being reassigned later on with a different
value. The initialization is redundant and can be removed.
Cleans up clang scan-build warning:
fs/cifs/cifssmb.c:465:7: warning: Value stored to 'mnt_sign_enabled
during its initialization is never read
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Coverity complains about assigning a pointer based on
value length before checking that value length goes
beyond the end of the SMB. Although this is even more
unlikely as value length is a single byte, and the
pointer is not dereferenced until laterm, it is clearer
to check the lengths first.
Addresses-Coverity: 1467704 ("Speculative execution data leak")
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Commit fa1f57421e ("xen/virtio: Enable restricted memory access using
Xen grant mappings") introduced a new requirement for using virtio
devices: the backend now needs to support the VIRTIO_F_ACCESS_PLATFORM
feature.
This is an undue requirement for non-PV guests, as those can be operated
with existing backends without any problem, as long as those backends
are running in dom0.
Per default allow virtio devices without grant support for non-PV
guests.
On Arm require VIRTIO_F_ACCESS_PLATFORM for devices having been listed
in the device tree to use grants.
Add a new config item to always force use of grants for virtio.
Fixes: fa1f57421e ("xen/virtio: Enable restricted memory access using Xen grant mappings")
Reported-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # Arm64 guest using Xen
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20220622063838.8854-4-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
The only use case of the platform_has() infrastructure has been
removed again, so remove the whole feature.
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # Arm64 guest using Xen
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20220622063838.8854-3-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Instead of having a global flag to require restricted memory access
for all virtio devices, introduce a callback which can select that
requirement on a per-device basis.
For convenience add a common function returning always true, which can
be used for use cases like SEV.
Per default use a callback always returning false.
As the callback needs to be set in early init code already, add a
virtio anchor which is builtin in case virtio is enabled.
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # Arm64 guest using Xen
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20220622063838.8854-2-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Currently when the toolstack issues a reboot, it gets translated into a
call to ctrl_alt_del(). But tying reboot to ctrl-alt-del means rebooting
may fail if e.g. the user has masked the ctrl-alt-del.target under
systemd.
A previous attempt to fix this issue made a change that sets the
kernel.ctrl-alt-del sysctl to 1 before ctrl_alt_del() is called.
However, this doesn't give userspace the opportunity to block rebooting
or even do any cleanup or syncing.
Instead, call orderly_reboot() which will call the "reboot" command,
giving userspace the opportunity to block it or perform the usual reboot
process while being independent of the ctrl-alt-del behaviour. It also
matches what happens in the shutdown case.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220627142822.3612106-1-ross.lagerwall@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
