[ Upstream commit 0ae8e4cca7 ]
Before this patch, transport offset (pkt->thoff) provides an offset
relative to the network header. This is fine for the inet families
because skb->data points to the network header in such case. However,
from netdev/egress, skb->data points to the mac header (if available),
thus, pkt->thoff is missing the mac header length.
Add skb_network_offset() to the transport offset (pkt->thoff) for
netdev, so transport header mangling works as expected. Adjust payload
fast eval function to use skb->data now that pkt->thoff provides an
absolute offset. This explains why users report that matching on
egress/netdev works but payload mangling does not.
This patch implicitly fixes payload mangling for IPv4 packets in
netdev/egress given skb_store_bits() requires an offset from skb->data
to reach the transport header.
I suspect that nft_exthdr and the trace infra were also broken from
netdev/egress because they also take skb->data as start, and pkt->thoff
was not correct.
Note that IPv6 is fine because ipv6_find_hdr() already provides a
transport offset starting from skb->data, which includes
skb_network_offset().
The bridge family also uses nft_set_pktinfo_ipv4_validate(), but there
skb_network_offset() is zero, so the update in this patch does not alter
the existing behaviour.
Fixes: 42df6e1d22 ("netfilter: Introduce egress hook")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02d374f341 ]
For the QUEUE_FLAG_HW_WC to actually work, it needs to have a separate
number from QUEUE_FLAG_FUA, doh.
Fixes: 43c9835b14 ("block: don't allow enabling a cache on devices that don't support it")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20231226081524.180289-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 753547de0d ]
The ___kcrctab section holds an array of 32-bit CRC values.
Add a .balign 4 to tell the linker the correct memory alignment.
Fixes: f3304ecd7f ("linux/export: use inline assembler to populate symbol CRCs")
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f6847807c2 ]
An alignment of 4 bytes is wrong for 64-bit platforms which don't define
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS (which then store 64-bit pointers).
Fix their alignment to 8 bytes.
Fixes: ddb5cdbafa ("kbuild: generate KSYMTAB entries by modpost")
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 077c212f03 ]
Recently, we converted the ctime accesses in the kernel to use new
accessor functions. Linus recently pointed out though that if we add
accessors for the atime and mtime, then that would allow us to
seamlessly change how these timestamps are stored in the inode.
Add new accessor functions for the atime and mtime that mirror the
accessors for the ctime.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/r/20231004185239.80830-1-jlayton@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Stable-dep-of: 01fe654f78 ("fs: cifs: Fix atime update check")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a931c68160 upstream.
An out of bounds read can occur within the tracepoint 9p_protocol_dump. In
the fast assign, there is a memcpy that uses a constant size of 32 (macro
named P9_PROTO_DUMP_SZ). When the copy is invoked, the source buffer is not
guaranteed match this size. It was found that in some cases the source
buffer size is less than 32, resulting in a read that overruns.
The size of the source buffer seems to be known at the time of the
tracepoint being invoked. The allocations happen within p9_fcall_init(),
where the capacity field is set to the allocated size of the payload
buffer. This patch tries to fix the overrun by changing the fixed array to
a dynamically sized array and using the minimum of the capacity value or
P9_PROTO_DUMP_SZ as its length. The trace log statement is adjusted to
account for this. Note that the trace log no longer splits the payload on
the first 16 bytes. The full payload is now logged to a single line.
To repro the orignal problem, operations to a plan 9 managed resource can
be used. The simplest approach might just be mounting a shared filesystem
(between host and guest vm) using the plan 9 protocol while the tracepoint
is enabled.
mount -t 9p -o trans=virtio <mount_tag> <mount_path>
The bpftrace program below can be used to show the out of bounds read.
Note that a recent version of bpftrace is needed for the raw tracepoint
support. The script was tested using v0.19.0.
/* from include/net/9p/9p.h */
struct p9_fcall {
u32 size;
u8 id;
u16 tag;
size_t offset;
size_t capacity;
struct kmem_cache *cache;
u8 *sdata;
bool zc;
};
tracepoint:9p:9p_protocol_dump
{
/* out of bounds read can happen when this tracepoint is enabled */
}
rawtracepoint:9p_protocol_dump
{
$pdu = (struct p9_fcall *)arg1;
$dump_sz = (uint64)32;
if ($dump_sz > $pdu->capacity) {
printf("reading %zu bytes from src buffer of %zu bytes\n",
$dump_sz, $pdu->capacity);
}
}
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Message-ID: <20231204202321.22730-1-inwardvessel@gmail.com>
Fixes: 60ece0833b ("net/9p: allocate appropriate reduced message buffers")
Cc: stable@vger.kernel.org
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 59b047bc98 upstream.
If two Bluetooth devices both support BR/EDR and BLE, and also
support Secure Connections, then they only need to pair once.
The LTK generated during the LE pairing process may be converted
into a BR/EDR link key for BR/EDR transport, and conversely, a
link key generated during the BR/EDR SSP pairing process can be
converted into an LTK for LE transport. Hence, the link type of
the link key and LTK is not fixed, they can be either an LE LINK
or an ACL LINK.
Currently, in the mgmt_new_irk/ltk/crsk/link_key functions, the
link type is fixed, which could lead to incorrect address types
being reported to the application layer. Therefore, it is necessary
to add link_type/addr_type to the smp_irk/ltk/crsk and link_key,
to ensure the generation of the correct address type.
SMP over BREDR:
Before Fix:
> ACL Data RX: Handle 11 flags 0x02 dlen 12
BR/EDR SMP: Identity Address Information (0x09) len 7
Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 00:00:00:00:00:00 (Non-Resolvable)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
After Fix:
> ACL Data RX: Handle 11 flags 0x02 dlen 12
BR/EDR SMP: Identity Address Information (0x09) len 7
Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 00:00:00:00:00:00 (Non-Resolvable)
BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
SMP over LE:
Before Fix:
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 5F:5C:07:37:47:D5 (Resolvable)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
@ MGMT Event: New Link Key (0x0009) plen 26
BR/EDR Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated Combination key from P-256 (0x08)
After Fix:
@ MGMT Event: New Identity Resolving Key (0x0018) plen 30
Random address: 5E:03:1C:00:38:21 (Resolvable)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
@ MGMT Event: New Long Term Key (0x000a) plen 37
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated key from P-256 (0x03)
@ MGMT Event: New Link Key (0x0009) plen 26
Store hint: Yes (0x01)
LE Address: F8:7D:76:F2:12:F3 (OUI F8-7D-76)
Key type: Authenticated Combination key from P-256 (0x08)
Cc: stable@vger.kernel.org
Signed-off-by: Xiao Yao <xiaoyao@rock-chips.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 39299bdd25 ]
If a key has an expiration time, then when that time passes, the key is
left around for a certain amount of time before being collected (5 mins by
default) so that EKEYEXPIRED can be returned instead of ENOKEY. This is a
problem for DNS keys because we want to redo the DNS lookup immediately at
that point.
Fix this by allowing key types to be marked such that keys of that type
don't have this extra period, but are reclaimed as soon as they expire and
turn this on for dns_resolver-type keys. To make this easier to handle,
key->expiry is changed to be permanent if TIME64_MAX rather than 0.
Furthermore, give such new-style negative DNS results a 1s default expiry
if no other expiry time is set rather than allowing it to stick around
indefinitely. This shouldn't be zero as ls will follow a failing stat call
immediately with a second with AT_SYMLINK_NOFOLLOW added.
Fixes: 1a4240f476 ("DNS: Separate out CIFS DNS Resolver code")
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Markus Suvanto <markus.suvanto@gmail.com>
cc: Wang Lei <wang840925@gmail.com>
cc: Jeff Layton <jlayton@redhat.com>
cc: Steve French <smfrench@gmail.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Jarkko Sakkinen <jarkko@kernel.org>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: linux-cifs@vger.kernel.org
cc: linux-nfs@vger.kernel.org
cc: ceph-devel@vger.kernel.org
cc: keyrings@vger.kernel.org
cc: netdev@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dade3f6a1e ]
This reverts commit 3dec89b14d.
The commit has some race conditions given how expires is managed on a
fib6_info in relation to gc start, adding the entry to the gc list and
setting the timer value leading to UAF. Revert the commit and try again
in a later release.
Fixes: 3dec89b14d ("net/ipv6: Remove expired routes with a separated list of routes")
Cc: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20231219030243.25687-1-dsahern@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 50efc63d1a ]
hci_conn_hash_lookup_cis shall always match the requested CIG and CIS
ids even when they are unset as otherwise it result in not being able
to bind/connect different sockets to the same address as that would
result in having multiple sockets mapping to the same hci_conn which
doesn't really work and prevents BAP audio configuration such as
AC 6(i) when CIG and CIS are left unset.
Fixes: c14516faed ("Bluetooth: hci_conn: Fix not matching by CIS ID")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d6650646c ]
I added logic to track the sock pair for stream_unix sockets so that we
ensure lifetime of the sock matches the time a sockmap could reference
the sock (see fixes tag). I forgot though that we allow af_unix unconnected
sockets into a sock{map|hash} map.
This is problematic because previous fixed expected sk_pair() to exist
and did not NULL check it. Because unconnected sockets have a NULL
sk_pair this resulted in the NULL ptr dereference found by syzkaller.
BUG: KASAN: null-ptr-deref in unix_stream_bpf_update_proto+0x72/0x430 net/unix/unix_bpf.c:171
Write of size 4 at addr 0000000000000080 by task syz-executor360/5073
Call Trace:
<TASK>
...
sock_hold include/net/sock.h:777 [inline]
unix_stream_bpf_update_proto+0x72/0x430 net/unix/unix_bpf.c:171
sock_map_init_proto net/core/sock_map.c:190 [inline]
sock_map_link+0xb87/0x1100 net/core/sock_map.c:294
sock_map_update_common+0xf6/0x870 net/core/sock_map.c:483
sock_map_update_elem_sys+0x5b6/0x640 net/core/sock_map.c:577
bpf_map_update_value+0x3af/0x820 kernel/bpf/syscall.c:167
We considered just checking for the null ptr and skipping taking a ref
on the NULL peer sock. But, if the socket is then connected() after
being added to the sockmap we can cause the original issue again. So
instead this patch blocks adding af_unix sockets that are not in the
ESTABLISHED state.
Reported-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+e8030702aefd3444fb9e@syzkaller.appspotmail.com
Fixes: 8866730aed ("bpf, sockmap: af_unix stream sockets need to hold ref for pair sock")
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20231201180139.328529-2-john.fastabend@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98fb9b9680 ]
For vendor action frames, whether a protected one should be
used or not is clearly up to the individual vendor and frame,
so even though a protected dual is defined, it may not get
used. Thus, don't require protection for vendor action frames
when they're used in a connection.
Since we obviously don't process frames unknown to the kernel
in the kernel, it may makes sense to invert this list to have
all the ones the kernel processes and knows to be requiring
protection, but that'd be a different change.
Fixes: 91535613b6 ("wifi: mac80211: don't drop all unprotected public action frames")
Reported-by: Jouni Malinen <j@w1.fi>
Link: https://msgid.link/20231206223801.f6a2cf4e67ec.Ifa6acc774bd67801d3dafb405278f297683187aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c7a387ffe ]
With the typical model where the display server opens the file descriptor
and then hands it over to the client(*), we were showing stale data in
debugfs.
Fix it by updating the drm_file->pid on ioctl access from a different
process.
The field is also made RCU protected to allow for lockless readers. Update
side is protected with dev->filelist_mutex.
Before:
$ cat /sys/kernel/debug/dri/0/clients
command pid dev master a uid magic
Xorg 2344 0 y y 0 0
Xorg 2344 0 n y 0 2
Xorg 2344 0 n y 0 3
Xorg 2344 0 n y 0 4
After:
$ cat /sys/kernel/debug/dri/0/clients
command tgid dev master a uid magic
Xorg 830 0 y y 0 0
xfce4-session 880 0 n y 0 1
xfwm4 943 0 n y 0 2
neverball 1095 0 n y 0 3
*)
More detailed and historically accurate description of various handover
implementation kindly provided by Emil Velikov:
"""
The traditional model, the server was the orchestrator managing the
primary device node. From the fd, to the master status and
authentication. But looking at the fd alone, this has varied across
the years.
IIRC in the DRI1 days, Xorg (libdrm really) would have a list of open
fd(s) and reuse those whenever needed, DRI2 the client was responsible
for open() themselves and with DRI3 the fd was passed to the client.
Around the inception of DRI3 and systemd-logind, the latter became
another possible orchestrator. Whereby Xorg and Wayland compositors
could ask it for the fd. For various reasons (hysterical and genuine
ones) Xorg has a fallback path going the open(), whereas Wayland
compositors are moving to solely relying on logind... some never had
fallback even.
Over the past few years, more projects have emerged which provide
functionality similar (be that on API level, Dbus, or otherwise) to
systemd-logind.
"""
v2:
* Fixed typo in commit text and added a fine historical explanation
from Emil.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Tested-by: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230621094824.2348732-1-tvrtko.ursulin@linux.intel.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Stable-dep-of: 5a6c9a05e5 ("drm: Fix FD ownership check in drm_master_check_perm()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6376a82459 ]
The cleanup tasks of kdamond threads including reset of corresponding
DAMON context's ->kdamond field and decrease of global nr_running_ctxs
counter is supposed to be executed by kdamond_fn(). However, commit
0f91d13366 ("mm/damon: simplify stop mechanism") made neither
damon_start() nor damon_stop() ensure the corresponding kdamond has
started the execution of kdamond_fn().
As a result, the cleanup can be skipped if damon_stop() is called fast
enough after the previous damon_start(). Especially the skipped reset
of ->kdamond could cause a use-after-free.
Fix it by waiting for start of kdamond_fn() execution from
damon_start().
Link: https://lkml.kernel.org/r/20231208175018.63880-1-sj@kernel.org
Fixes: 0f91d13366 ("mm/damon: simplify stop mechanism")
Signed-off-by: SeongJae Park <sj@kernel.org>
Reported-by: Jakub Acs <acsjakub@amazon.de>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Jakub Acs <acsjakub@amazon.de>
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4472edf63d ]
DAMON sleeps for sampling interval after each sampling, and check if the
aggregation interval and the ops update interval have passed using
ktime_get_coarse_ts64() and baseline timestamps for the intervals. That
design is for making the operations occur at deterministic timing
regardless of the time that spend for each work. However, it turned out
it is not that useful, and incur not-that-intuitive results.
After all, timer functions, and especially sleep functions that DAMON uses
to wait for specific timing, are not necessarily strictly accurate. It is
legal design, so no problem. However, depending on such inaccuracies, the
nr_accesses can be larger than aggregation interval divided by sampling
interval. For example, with the default setting (5 ms sampling interval
and 100 ms aggregation interval) we frequently show regions having
nr_accesses larger than 20. Also, if the execution of a DAMOS scheme
takes a long time, next aggregation could happen before enough number of
samples are collected. This is not what usual users would intuitively
expect.
Since access check sampling is the smallest unit work of DAMON, using the
number of passed sampling intervals as the DAMON-internal timer can easily
avoid these problems. That is, convert aggregation and ops update
intervals to numbers of sampling intervals that need to be passed before
those operations be executed, count the number of passed sampling
intervals, and invoke the operations as soon as the specific amount of
sampling intervals passed. Make the change.
Note that this could make a behavioral change to settings that using
intervals that not aligned by the sampling interval. For example, if the
sampling interval is 5 ms and the aggregation interval is 12 ms, DAMON
effectively uses 15 ms as its aggregation interval, because it checks
whether the aggregation interval after sleeping the sampling interval.
This change will make DAMON to effectively use 10 ms as aggregation
interval, since it uses 'aggregation interval / sampling interval *
sampling interval' as the effective aggregation interval, and we don't use
floating point types. Usual users would have used aligned intervals, so
this behavioral change is not expected to make any meaningful impact, so
just make this change.
Link: https://lkml.kernel.org/r/20230914021523.60649-1-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 6376a82459 ("mm/damon/core: make damon_start() waits until kdamond_fn() starts")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4b7de80160 upstream.
Lee pointed out issue found by syscaller [0] hitting BUG in prog array
map poke update in prog_array_map_poke_run function due to error value
returned from bpf_arch_text_poke function.
There's race window where bpf_arch_text_poke can fail due to missing
bpf program kallsym symbols, which is accounted for with check for
-EINVAL in that BUG_ON call.
The problem is that in such case we won't update the tail call jump
and cause imbalance for the next tail call update check which will
fail with -EBUSY in bpf_arch_text_poke.
I'm hitting following race during the program load:
CPU 0 CPU 1
bpf_prog_load
bpf_check
do_misc_fixups
prog_array_map_poke_track
map_update_elem
bpf_fd_array_map_update_elem
prog_array_map_poke_run
bpf_arch_text_poke returns -EINVAL
bpf_prog_kallsyms_add
After bpf_arch_text_poke (CPU 1) fails to update the tail call jump, the next
poke update fails on expected jump instruction check in bpf_arch_text_poke
with -EBUSY and triggers the BUG_ON in prog_array_map_poke_run.
Similar race exists on the program unload.
Fixing this by moving the update to bpf_arch_poke_desc_update function which
makes sure we call __bpf_arch_text_poke that skips the bpf address check.
Each architecture has slightly different approach wrt looking up bpf address
in bpf_arch_text_poke, so instead of splitting the function or adding new
'checkip' argument in previous version, it seems best to move the whole
map_poke_run update as arch specific code.
[0] https://syzkaller.appspot.com/bug?extid=97a4fe20470e9bc30810
Fixes: ebf7d1f508 ("bpf, x64: rework pro/epilogue and tailcall handling in JIT")
Reported-by: syzbot+97a4fe20470e9bc30810@syzkaller.appspotmail.com
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Cc: Lee Jones <lee@kernel.org>
Cc: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20231206083041.1306660-2-jolsa@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b8ec60e118 upstream.
.discard.retpoline_safe sections do not have the SHF_ALLOC flag. These
sections referencing text sections' STT_SECTION symbols with PC-relative
relocations like R_386_PC32 [0] is conceptually not suitable. Newer
LLD will report warnings for REL relocations even for relocatable links [1]:
ld.lld: warning: vmlinux.a(drivers/i2c/busses/i2c-i801.o):(.discard.retpoline_safe+0x120): has non-ABS relocation R_386_PC32 against symbol ''
Switch to absolute relocations instead, which indicate link-time
addresses. In a relocatable link, these addresses are also output
section offsets, used by checks in tools/objtool/check.c. When linking
vmlinux, these .discard.* sections will be discarded, therefore it is
not a problem that R_X86_64_32 cannot represent a kernel address.
Alternatively, we could set the SHF_ALLOC flag for .discard.* sections,
but I think non-SHF_ALLOC for sections to be discarded makes more sense.
Note: if we decide to never support REL architectures (e.g. arm, i386),
we can utilize R_*_NONE relocations (.reloc ., BFD_RELOC_NONE, sym),
making .discard.* sections zero-sized. That said, the section content
waste is 4 bytes per entry, much smaller than sizeof(Elf{32,64}_Rel).
[0] commit 1c0c1faf56 ("objtool: Use relative pointers for annotations")
[1] https://github.com/ClangBuiltLinux/linux/issues/1937
Signed-off-by: Fangrui Song <maskray@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20230920001728.1439947-1-maskray@google.com
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4376807bf2 upstream.
In the effort to reduce zombie memcgs [1], it was discovered that the
memcg LRU doesn't apply enough pressure on offlined memcgs. Specifically,
instead of rotating them to the tail of the current generation
(MEMCG_LRU_TAIL) for a second attempt, it moves them to the next
generation (MEMCG_LRU_YOUNG) after the first attempt.
Not applying enough pressure on offlined memcgs can cause them to build
up, and this can be particularly harmful to memory-constrained systems.
On Pixel 8 Pro, launching apps for 50 cycles:
Before After Change
Zombie memcgs 45 35 -22%
[1] https://lore.kernel.org/CABdmKX2M6koq4Q0Cmp_-=wbP0Qa190HdEGGaHfxNS05gAkUtPA@mail.gmail.com/
Link: https://lkml.kernel.org/r/20231208061407.2125867-4-yuzhao@google.com
Fixes: e4dde56cd2 ("mm: multi-gen LRU: per-node lru_gen_folio lists")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reported-by: T.J. Mercier <tjmercier@google.com>
Tested-by: T.J. Mercier <tjmercier@google.com>
Cc: Charan Teja Kalla <quic_charante@quicinc.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8aa4206179 upstream.
While investigating kswapd "consuming 100% CPU" [1] (also see "mm/mglru:
try to stop at high watermarks"), it was discovered that the memcg LRU can
breach the thrashing protection imposed by min_ttl_ms.
Before the memcg LRU:
kswapd()
shrink_node_memcgs()
mem_cgroup_iter()
inc_max_seq() // always hit a different memcg
lru_gen_age_node()
mem_cgroup_iter()
check the timestamp of the oldest generation
After the memcg LRU:
kswapd()
shrink_many()
restart:
iterate the memcg LRU:
inc_max_seq() // occasionally hit the same memcg
if raced with lru_gen_rotate_memcg():
goto restart
lru_gen_age_node()
mem_cgroup_iter()
check the timestamp of the oldest generation
Specifically, when the restart happens in shrink_many(), it needs to stick
with the (memcg LRU) generation it began with. In other words, it should
neither re-read memcg_lru->seq nor age an lruvec of a different
generation. Otherwise it can hit the same memcg multiple times without
giving lru_gen_age_node() a chance to check the timestamp of that memcg's
oldest generation (against min_ttl_ms).
[1] https://lore.kernel.org/CAK8fFZ4DY+GtBA40Pm7Nn5xCHy+51w3sfxPqkqpqakSXYyX+Wg@mail.gmail.com/
Link: https://lkml.kernel.org/r/20231208061407.2125867-3-yuzhao@google.com
Fixes: e4dde56cd2 ("mm: multi-gen LRU: per-node lru_gen_folio lists")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Tested-by: T.J. Mercier <tjmercier@google.com>
Cc: Charan Teja Kalla <quic_charante@quicinc.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 081488051d upstream.
Unmapped folios accessed through file descriptors can be underprotected.
Those folios are added to the oldest generation based on:
1. The fact that they are less costly to reclaim (no need to walk the
rmap and flush the TLB) and have less impact on performance (don't
cause major PFs and can be non-blocking if needed again).
2. The observation that they are likely to be single-use. E.g., for
client use cases like Android, its apps parse configuration files
and store the data in heap (anon); for server use cases like MySQL,
it reads from InnoDB files and holds the cached data for tables in
buffer pools (anon).
However, the oldest generation can be very short lived, and if so, it
doesn't provide the PID controller with enough time to respond to a surge
of refaults. (Note that the PID controller uses weighted refaults and
those from evicted generations only take a half of the whole weight.) In
other words, for a short lived generation, the moving average smooths out
the spike quickly.
To fix the problem:
1. For folios that are already on LRU, if they can be beyond the
tracking range of tiers, i.e., five accesses through file
descriptors, move them to the second oldest generation to give them
more time to age. (Note that tiers are used by the PID controller
to statistically determine whether folios accessed multiple times
through file descriptors are worth protecting.)
2. When adding unmapped folios to LRU, adjust the placement of them so
that they are not too close to the tail. The effect of this is
similar to the above.
On Android, launching 55 apps sequentially:
Before After Change
workingset_refault_anon 25641024 25598972 0%
workingset_refault_file 115016834 106178438 -8%
Link: https://lkml.kernel.org/r/20231208061407.2125867-1-yuzhao@google.com
Fixes: ac35a49023 ("mm: multi-gen LRU: minimal implementation")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reported-by: Charan Teja Kalla <quic_charante@quicinc.com>
Tested-by: Kalesh Singh <kaleshsingh@google.com>
Cc: T.J. Mercier <tjmercier@google.com>
Cc: Kairui Song <ryncsn@gmail.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 125b0bb95d ]
We really don't want to do atomic_read() or anything like that, since we
already have the value, not the lock. The whole point of this is that
we've loaded the lock from memory, and we want to check whether the
value we loaded was a locked one or not.
The main use of this is the lockref code, which loads both the lock and
the reference count in one atomic operation, and then works on that
combined value. With the atomic_read(), the compiler would pointlessly
spill the value to the stack, in order to then be able to read it back
"atomically".
This is the qspinlock version of commit c6f4a90022 ("asm-generic:
ticket-lock: Optimize arch_spin_value_unlocked()") which fixed this same
bug for ticket locks.
Cc: Guo Ren <guoren@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/all/CAHk-=whNRv0v6kQiV5QO6DJhjH4KEL36vWQ6Re8Csrnh4zbRkQ@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 718ab82266 upstream.
Add pci_enable_link_state_locked() for enabling link states that can be
used in contexts where a pci_bus_sem read lock is already held (e.g. from
pci_walk_bus()).
This helper will be used to fix a couple of potential deadlocks where
the current helper is called with the lock already held, hence the CC
stable tag.
Fixes: f492edb40b ("PCI: vmd: Add quirk to configure PCIe ASPM and LTR")
Link: https://lore.kernel.org/r/20231128081512.19387-2-johan+linaro@kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
[bhelgaas: include helper name in subject, commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: <stable@vger.kernel.org> # 6.3
Cc: Michael Bottini <michael.a.bottini@linux.intel.com>
Cc: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c55e0a55b1 upstream.
Although DIRECT_IO_RELAX's initial usage is to allow shared mmap, its
description indicates a purpose of reducing memory footprint. This
may imply that it could be further used to relax other DIRECT_IO
operations in the future.
Replace it with a flag DIRECT_IO_ALLOW_MMAP which does only one thing,
allow shared mmap of DIRECT_IO files while still bypassing the cache
on regular reads and writes.
[Miklos] Also Keep DIRECT_IO_RELAX definition for backward compatibility.
Signed-off-by: Tyler Fanelli <tfanelli@redhat.com>
Fixes: e78662e818 ("fuse: add a new fuse init flag to relax restrictions in no cache mode")
Cc: <stable@vger.kernel.org> # v6.6
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f8fa5d7692 upstream.
There are multiple ways to grab references to credentials, and the only
protection we have against overflowing it is the memory required to do
so.
With memory sizes only moving in one direction, let's bump the reference
count to 64-bit and move it outside the realm of feasibly overflowing.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bd4a816752 ]
Lorenzo points out that we effectively clear all unknown
flags from PIO when copying them to userspace in the netlink
RTM_NEWPREFIX notification.
We could fix this one at a time as new flags are defined,
or in one fell swoop - I choose the latter.
We could either define 6 new reserved flags (reserved1..6) and handle
them individually (and rename them as new flags are defined), or we
could simply copy the entire unmodified byte over - I choose the latter.
This unfortunately requires some anonymous union/struct magic,
so we add a static assert on the struct size for a little extra safety.
Cc: David Ahern <dsahern@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d293714ac ]
Send blocking events from IB driver whenever the device is done being
affiliated or if it is removed from an affiliation.
This is useful since now the EN driver can register to those event and
know when a device is affiliated or not.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://lore.kernel.org/r/a7491c3e483cfd8d962f5f75b9a25f253043384a.1695296682.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Stable-dep-of: 762a55a54e ("net/mlx5e: Disable IPsec offload support if not FW steering")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2bf84f1d1 ]
IPsec NAT-T packets are UDP encapsulated packets over ESP normal ones.
In case they arrive to RX, the SPI and ESP are located in inner header,
while the check was performed on outer header instead.
That wrong check caused to the situation where received rekeying request
was missed and caused to rekey timeout, which "compensated" this failure
by completing rekeying.
Fixes: d659549349 ("net/mlx5e: Support IPsec NAT-T functionality")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a5e400a985 ]
Users can configure IPsec replay window size, but mlx5 driver didn't
honor their choice and set always 32bits. Fix assignment logic to
configure right size from the beginning.
Fixes: 7db21ef456 ("net/mlx5e: Set IPsec replay sequence numbers")
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7037d95a04 ]
The ASUS USB-C2500 is an RTL8156 based 2.5G Ethernet controller.
Add the vendor and product ID values to the driver. This makes Ethernet
work with the adapter.
Signed-off-by: Kelly Kane <kelly@hawknetworks.com>
Link: https://lore.kernel.org/r/20231203011712.6314-1-kelly@hawknetworks.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d839a656d0 upstream.
It seems that the pointer-to-kretprobe "rp" within the kretprobe_holder is
RCU-managed, based on the (non-rethook) implementation of get_kretprobe().
The thought behind this patch is to make use of the RCU API where possible
when accessing this pointer so that the needed barriers are always in place
and to self-document the code.
The __rcu annotation to "rp" allows for sparse RCU checking. Plain writes
done to the "rp" pointer are changed to make use of the RCU macro for
assignment. For the single read, the implementation of get_kretprobe()
is simplified by making use of an RCU macro which accomplishes the same,
but note that the log warning text will be more generic.
I did find that there is a difference in assembly generated between the
usage of the RCU macros vs without. For example, on arm64, when using
rcu_assign_pointer(), the corresponding store instruction is a
store-release (STLR) which has an implicit barrier. When normal assignment
is done, a regular store (STR) is found. In the macro case, this seems to
be a result of rcu_assign_pointer() using smp_store_release() when the
value to write is not NULL.
Link: https://lore.kernel.org/all/20231122132058.3359-1-inwardvessel@gmail.com/
Fixes: d741bf41d7 ("kprobes: Remove kretprobe hash")
Cc: stable@vger.kernel.org
Signed-off-by: JP Kobryn <inwardvessel@gmail.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e0f04e41e8 upstream.
Invoke drm_plane_helper_funcs.end_fb_access before
drm_atomic_helper_commit_hw_done(). The latter function hands over
ownership of the plane state to the following commit, which might
free it. Releasing resources in end_fb_access then operates on undefined
state. This bug has been observed with non-blocking commits when they
are being queued up quickly.
Here is an example stack trace from the bug report. The plane state has
been free'd already, so the pages for drm_gem_fb_vunmap() are gone.
Unable to handle kernel paging request at virtual address 0000000100000049
[...]
drm_gem_fb_vunmap+0x18/0x74
drm_gem_end_shadow_fb_access+0x1c/0x2c
drm_atomic_helper_cleanup_planes+0x58/0xd8
drm_atomic_helper_commit_tail+0x90/0xa0
commit_tail+0x15c/0x188
commit_work+0x14/0x20
Fix this by running end_fb_access immediately after updating all planes
in drm_atomic_helper_commit_planes(). The existing clean-up helper
drm_atomic_helper_cleanup_planes() now only handles cleanup_fb.
For aborted commits, roll back from drm_atomic_helper_prepare_planes()
in the new helper drm_atomic_helper_unprepare_planes(). This case is
different from regular cleanup, as we have to release the new state;
regular cleanup releases the old state. The new helper also invokes
cleanup_fb for all planes.
The changes mostly involve DRM's atomic helpers. Only two drivers, i915
and nouveau, implement their own commit function. Update them to invoke
drm_atomic_helper_unprepare_planes(). Drivers with custom commit_tail
function do not require changes.
v4:
* fix documentation (kernel test robot)
v3:
* add drm_atomic_helper_unprepare_planes() for rolling back
* use correct state for end_fb_access
v2:
* fix test in drm_atomic_helper_cleanup_planes()
Reported-by: Alyssa Ross <hi@alyssa.is>
Closes: https://lore.kernel.org/dri-devel/87leazm0ya.fsf@alyssa.is/
Suggested-by: Daniel Vetter <daniel@ffwll.ch>
Fixes: 94d879eaf7 ("drm/atomic-helper: Add {begin,end}_fb_access to plane helpers")
Tested-by: Alyssa Ross <hi@alyssa.is>
Reviewed-by: Alyssa Ross <hi@alyssa.is>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: <stable@vger.kernel.org> # v6.2+
Link: https://patchwork.freedesktop.org/patch/msgid/20231204083247.22006-1-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 187da0f825 upstream.
The routine __vma_private_lock tests for the existence of a reserve map
associated with a private hugetlb mapping. A pointer to the reserve map
is in vma->vm_private_data. __vma_private_lock was checking the pointer
for NULL. However, it is possible that the low bits of the pointer could
be used as flags. In such instances, vm_private_data is not NULL and not
a valid pointer. This results in the null-ptr-deref reported by syzbot:
general protection fault, probably for non-canonical address 0xdffffc000000001d:
0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef]
CPU: 0 PID: 5048 Comm: syz-executor139 Not tainted 6.6.0-rc7-syzkaller-00142-g88
8cf78c29e2 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 1
0/09/2023
RIP: 0010:__lock_acquire+0x109/0x5de0 kernel/locking/lockdep.c:5004
...
Call Trace:
<TASK>
lock_acquire kernel/locking/lockdep.c:5753 [inline]
lock_acquire+0x1ae/0x510 kernel/locking/lockdep.c:5718
down_write+0x93/0x200 kernel/locking/rwsem.c:1573
hugetlb_vma_lock_write mm/hugetlb.c:300 [inline]
hugetlb_vma_lock_write+0xae/0x100 mm/hugetlb.c:291
__hugetlb_zap_begin+0x1e9/0x2b0 mm/hugetlb.c:5447
hugetlb_zap_begin include/linux/hugetlb.h:258 [inline]
unmap_vmas+0x2f4/0x470 mm/memory.c:1733
exit_mmap+0x1ad/0xa60 mm/mmap.c:3230
__mmput+0x12a/0x4d0 kernel/fork.c:1349
mmput+0x62/0x70 kernel/fork.c:1371
exit_mm kernel/exit.c:567 [inline]
do_exit+0x9ad/0x2a20 kernel/exit.c:861
__do_sys_exit kernel/exit.c:991 [inline]
__se_sys_exit kernel/exit.c:989 [inline]
__x64_sys_exit+0x42/0x50 kernel/exit.c:989
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x38/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
Mask off low bit flags before checking for NULL pointer. In addition, the
reserve map only 'belongs' to the OWNER (parent in parent/child
relationships) so also check for the OWNER flag.
Link: https://lkml.kernel.org/r/20231114012033.259600-1-mike.kravetz@oracle.com
Reported-by: syzbot+6ada951e7c0f7bc8a71e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-mm/00000000000078d1e00608d7878b@google.com/
Fixes: bf4916922c ("hugetlbfs: extend hugetlb_vma_lock to private VMAs")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Reviewed-by: Rik van Riel <riel@surriel.com>
Cc: Edward Adam Davis <eadavis@qq.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 73424d00dc upstream.
Clang static checker complains that value stored to 'from' is never read.
And memcpy_from_folio() only copy the last chunk memory from folio to
destination. Use 'to += chunk' to replace 'from += chunk' to fix this
typo problem.
Link: https://lkml.kernel.org/r/20231130034017.1210429-1-suhui@nfschina.com
Fixes: b23d03ef7a ("highmem: add memcpy_to_folio() and memcpy_from_folio()")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jiaqi Yan <jiaqiyan@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a1461f1fd6 upstream.
Since the rethook::handler is an RCU-maganged pointer so that it will
notice readers the rethook is stopped (unregistered) or not, it should
be an __rcu pointer and use appropriate functions to be accessed. This
will use appropriate memory barrier when accessing it. OTOH,
rethook::data is never changed, so we don't need to check it in
get_kretprobe().
NOTE: To avoid sparse warning, rethook::handler is defined by a raw
function pointer type with __rcu instead of rethook_handler_t.
Link: https://lore.kernel.org/all/170126066201.398836.837498688669005979.stgit@devnote2/
Fixes: 54ecbe6f1e ("rethook: Add a generic return hook")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311241808.rv9ceuAh-lkp@intel.com/
Tested-by: JP Kobryn <inwardvessel@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4fbc3a52cd ]
64k pages introduce the situation in this diagram when the HCA 4k page
size is being used:
+-------------------------------------------+ <--- 64k aligned VA
| |
| HCA 4k page |
| |
+-------------------------------------------+
| o |
| |
| o |
| |
| o |
+-------------------------------------------+
| |
| HCA 4k page |
| |
+-------------------------------------------+ <--- Live HCA page
|OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO| <--- offset
| | <--- VA
| MR data |
+-------------------------------------------+
| |
| HCA 4k page |
| |
+-------------------------------------------+
| o |
| |
| o |
| |
| o |
+-------------------------------------------+
| |
| HCA 4k page |
| |
+-------------------------------------------+
The VA addresses are coming from rdma-core in this diagram can be
arbitrary, but for 64k pages, the VA may be offset by some number of HCA
4k pages and followed by some number of HCA 4k pages.
The current iterator doesn't account for either the preceding 4k pages or
the following 4k pages.
Fix the issue by extending the ib_block_iter to contain the number of DMA
pages like comment [1] says and by using __sg_advance to start the
iterator at the first live HCA page.
The changes are contained in a parallel set of iterator start and next
functions that are umem aware and specific to umem since there is one user
of the rdma_for_each_block() without umem.
These two fixes prevents the extra pages before and after the user MR
data.
Fix the preceding pages by using the __sq_advance field to start at the
first 4k page containing MR data.
Fix the following pages by saving the number of pgsz blocks in the
iterator state and downcounting on each next.
This fix allows for the elimination of the small page crutch noted in the
Fixes.
Fixes: 10c75ccb54 ("RDMA/umem: Prevent small pages from being returned by ib_umem_find_best_pgsz()")
Link: https://lore.kernel.org/r/20231129202143.1434-2-shiraz.saleem@intel.com
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d99ed6072 ]
Similar to other protocol ops, it's useful for an scmi module driver to get
some generic information of a performance domain. Therefore, let's add a
new callback to provide this information. The information is currently
limited to the name of the performance domain and whether the set-level
operation is supported, although this can easily be extended if we find the
need for it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230825112633.236607-3-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Stable-dep-of: 8e3c98d918 ("firmware: arm_scmi: Fix frequency truncation by promoting multiplier type")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9090e70e6 ]
Similar to other protocol ops, it's useful for an scmi module driver to get
the number of supported performance domains, hence let's make this
available by adding a new perf protocol callback. Note that, a user is
being added from subsequent changes.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20230825112633.236607-2-ulf.hansson@linaro.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Stable-dep-of: 8e3c98d918 ("firmware: arm_scmi: Fix frequency truncation by promoting multiplier type")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e03781879a ]
The "NET_DM" generic netlink family notifies drop locations over the
"events" multicast group. This is problematic since by default generic
netlink allows non-root users to listen to these notifications.
Fix by adding a new field to the generic netlink multicast group
structure that when set prevents non-root users or root without the
'CAP_SYS_ADMIN' capability (in the user namespace owning the network
namespace) from joining the group. Set this field for the "events"
group. Use 'CAP_SYS_ADMIN' rather than 'CAP_NET_ADMIN' because of the
nature of the information that is shared over this group.
Note that the capability check in this case will always be performed
against the initial user namespace since the family is not netns aware
and only operates in the initial network namespace.
A new field is added to the structure rather than using the "flags"
field because the existing field uses uAPI flags and it is inappropriate
to add a new uAPI flag for an internal kernel check. In net-next we can
rework the "flags" field to use internal flags and fold the new field
into it. But for now, in order to reduce the amount of changes, add a
new field.
Since the information can only be consumed by root, mark the control
plane operations that start and stop the tracing as root-only using the
'GENL_ADMIN_PERM' flag.
Tested using [1].
Before:
# capsh -- -c ./dm_repo
# capsh --drop=cap_sys_admin -- -c ./dm_repo
After:
# capsh -- -c ./dm_repo
# capsh --drop=cap_sys_admin -- -c ./dm_repo
Failed to join "events" multicast group
[1]
$ cat dm.c
#include <stdio.h>
#include <netlink/genl/ctrl.h>
#include <netlink/genl/genl.h>
#include <netlink/socket.h>
int main(int argc, char **argv)
{
struct nl_sock *sk;
int grp, err;
sk = nl_socket_alloc();
if (!sk) {
fprintf(stderr, "Failed to allocate socket\n");
return -1;
}
err = genl_connect(sk);
if (err) {
fprintf(stderr, "Failed to connect socket\n");
return err;
}
grp = genl_ctrl_resolve_grp(sk, "NET_DM", "events");
if (grp < 0) {
fprintf(stderr,
"Failed to resolve \"events\" multicast group\n");
return grp;
}
err = nl_socket_add_memberships(sk, grp, NFNLGRP_NONE);
if (err) {
fprintf(stderr, "Failed to join \"events\" multicast group\n");
return err;
}
return 0;
}
$ gcc -I/usr/include/libnl3 -lnl-3 -lnl-genl-3 -o dm_repo dm.c
Fixes: 9a8afc8d39 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol")
Reported-by: "The UK's National Cyber Security Centre (NCSC)" <security@ncsc.gov.uk>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20231206213102.1824398-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58d3aade20 ]
After the blamed commit below, if the user-space application performs
window clamping when tp->rcv_wnd is 0, the TCP socket will never be
able to announce a non 0 receive window, even after completely emptying
the receive buffer and re-setting the window clamp to higher values.
Refactor tcp_set_window_clamp() to address the issue: when the user
decreases the current clamp value, set rcv_ssthresh according to the
same logic used at buffer initialization, but ensuring reserved mem
provisioning.
To avoid code duplication factor-out the relevant bits from
tcp_adjust_rcv_ssthresh() in a new helper and reuse it in the above
scenario.
When increasing the clamp value, give the rcv_ssthresh a chance to grow
according to previously implemented heuristic.
Fixes: 3aa7857fe1 ("tcp: enable mid stream window clamp")
Reported-by: David Gibson <david@gibson.dropbear.id.au>
Reported-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/705dad54e6e6e9a010e571bf58e0b35a8ae70503.1701706073.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37e4b8df27 ]
The status bits of register MAC_FPE_CTRL_STS are clear on read. Using
32-bit read for MAC_FPE_CTRL_STS in dwmac5_fpe_configure() and
dwmac5_fpe_send_mpacket() clear the status bits. Then the stmmac interrupt
handler missing FPE event status and leads to FPE handshaking failure and
retries.
To avoid clear status bits of MAC_FPE_CTRL_STS in dwmac5_fpe_configure()
and dwmac5_fpe_send_mpacket(), add fpe_csr to stmmac_fpe_cfg structure to
cache the control bits of MAC_FPE_CTRL_STS and to avoid reading
MAC_FPE_CTRL_STS in those methods.
Fixes: 5a5586112b ("net: stmmac: support FPE link partner hand-shaking procedure")
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Jianheng Zhang <Jianheng.Zhang@synopsys.com>
Link: https://lore.kernel.org/r/CY5PR12MB637225A7CF529D5BE0FBE59CBF81A@CY5PR12MB6372.namprd12.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c0930ccaa ]
2b8272ff4a ("cpu/hotplug: Prevent self deadlock on CPU hot-unplug")
solved the straight forward CPU hotplug deadlock vs. the scheduler
bandwidth timer. Yu discovered a more involved variant where a task which
has a bandwidth timer started on the outgoing CPU holds a lock and then
gets throttled. If the lock required by one of the CPU hotplug callbacks
the hotplug operation deadlocks because the unthrottling timer event is not
handled on the dying CPU and can only be recovered once the control CPU
reaches the hotplug state which pulls the pending hrtimers from the dead
CPU.
Solve this by pushing the hrtimers away from the dying CPU in the dying
callbacks. Nothing can queue a hrtimer on the dying CPU at that point because
all other CPUs spin in stop_machine() with interrupts disabled and once the
operation is finished the CPU is marked offline.
Reported-by: Yu Liao <liaoyu15@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Liu Tie <liutie4@huawei.com>
Link: https://lore.kernel.org/r/87a5rphara.ffs@tglx
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ea95c04fa ]
Drop the vfio_file_iommu_group() stub and instead unconditionally declare
the function to fudge around a KVM wart where KVM tries to do symbol_get()
on vfio_file_iommu_group() (and other VFIO symbols) even if CONFIG_VFIO=n.
Ensuring the symbol is always declared fixes a PPC build error when
modules are also disabled, in which case symbol_get() simply points at the
address of the symbol (with some attributes shenanigans). Because KVM
does symbol_get() instead of directly depending on VFIO, the lack of a
fully defined symbol is not problematic (ugly, but "fine").
arch/powerpc/kvm/../../../virt/kvm/vfio.c:89:7:
error: attribute declaration must precede definition [-Werror,-Wignored-attributes]
fn = symbol_get(vfio_file_iommu_group);
^
include/linux/module.h:805:60: note: expanded from macro 'symbol_get'
#define symbol_get(x) ({ extern typeof(x) x __attribute__((weak,visibility("hidden"))); &(x); })
^
include/linux/vfio.h:294:35: note: previous definition is here
static inline struct iommu_group *vfio_file_iommu_group(struct file *file)
^
arch/powerpc/kvm/../../../virt/kvm/vfio.c:89:7:
error: attribute declaration must precede definition [-Werror,-Wignored-attributes]
fn = symbol_get(vfio_file_iommu_group);
^
include/linux/module.h:805:65: note: expanded from macro 'symbol_get'
#define symbol_get(x) ({ extern typeof(x) x __attribute__((weak,visibility("hidden"))); &(x); })
^
include/linux/vfio.h:294:35: note: previous definition is here
static inline struct iommu_group *vfio_file_iommu_group(struct file *file)
^
2 errors generated.
Although KVM is firmly in the wrong (there is zero reason for KVM to build
virt/kvm/vfio.c when VFIO is disabled), fudge around the error in VFIO as
the stub is unnecessary and doesn't serve its intended purpose (KVM is the
only external user of vfio_file_iommu_group()), and there is an in-flight
series to clean up the entire KVM<->VFIO interaction, i.e. fixing this in
KVM would result in more churn in the long run, and the stub needs to go
away regardless.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202308251949.5IiaV0sz-lkp@intel.com
Closes: https://lore.kernel.org/oe-kbuild-all/202309030741.82aLACDG-lkp@intel.com
Closes: https://lore.kernel.org/oe-kbuild-all/202309110914.QLH0LU6L-lkp@intel.com
Link: https://lore.kernel.org/all/0-v1-08396538817d+13c5-vfio_kvm_kconfig_jgg@nvidia.com
Link: https://lore.kernel.org/all/20230916003118.2540661-1-seanjc@google.com
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Tested-by: Michael Ellerman <mpe@ellerman.id.au>
Fixes: c1cce6d079 ("vfio: Compile vfio_group infrastructure optionally")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20231130001000.543240-1-seanjc@google.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit febab20cae ]
When amd_pstate is running, writing to scaling_min_freq and
scaling_max_freq has no effect. These values are only passed to the
policy level, but not to the platform level. This means that the
platform does not know about the frequency limits set by the user.
To fix this, update the min_perf and max_perf values at the platform
level whenever the user changes the scaling_min_freq and scaling_max_freq
values.
Fixes: ffa5096a7c ("cpufreq: amd-pstate: implement Pstate EPP support for the AMD processors")
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8866730aed ]
AF_UNIX stream sockets are a paired socket. So sending on one of the pairs
will lookup the paired socket as part of the send operation. It is possible
however to put just one of the pairs in a BPF map. This currently increments
the refcnt on the sock in the sockmap to ensure it is not free'd by the
stack before sockmap cleans up its state and stops any skbs being sent/recv'd
to that socket.
But we missed a case. If the peer socket is closed it will be free'd by the
stack. However, the paired socket can still be referenced from BPF sockmap
side because we hold a reference there. Then if we are sending traffic through
BPF sockmap to that socket it will try to dereference the free'd pair in its
send logic creating a use after free. And following splat:
[59.900375] BUG: KASAN: slab-use-after-free in sk_wake_async+0x31/0x1b0
[59.901211] Read of size 8 at addr ffff88811acbf060 by task kworker/1:2/954
[...]
[59.905468] Call Trace:
[59.905787] <TASK>
[59.906066] dump_stack_lvl+0x130/0x1d0
[59.908877] print_report+0x16f/0x740
[59.910629] kasan_report+0x118/0x160
[59.912576] sk_wake_async+0x31/0x1b0
[59.913554] sock_def_readable+0x156/0x2a0
[59.914060] unix_stream_sendmsg+0x3f9/0x12a0
[59.916398] sock_sendmsg+0x20e/0x250
[59.916854] skb_send_sock+0x236/0xac0
[59.920527] sk_psock_backlog+0x287/0xaa0
To fix let BPF sockmap hold a refcnt on both the socket in the sockmap and its
paired socket. It wasn't obvious how to contain the fix to bpf_unix logic. The
primarily problem with keeping this logic in bpf_unix was: In the sock close()
we could handle the deref by having a close handler. But, when we are destroying
the psock through a map delete operation we wouldn't have gotten any signal
thorugh the proto struct other than it being replaced. If we do the deref from
the proto replace its too early because we need to deref the sk_pair after the
backlog worker has been stopped.
Given all this it seems best to just cache it at the end of the psock and eat 8B
for the af_unix and vsock users. Notice dgram sockets are OK because they handle
locking already.
Fixes: 94531cfcbe ("af_unix: Add unix_stream_proto for sockmap")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20231129012557.95371-2-john.fastabend@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45b3fae467 ]
Previously, one-element and zero-length arrays were treated as true
flexible arrays, even though they are actually "fake" flex arrays.
The __randomize_layout would leave them untouched at the end of the
struct, similarly to proper C99 flex-array members.
However, this approach changed with commit 1ee60356c2 ("gcc-plugins:
randstruct: Only warn about true flexible arrays"). Now, only C99
flexible-array members will remain untouched at the end of the struct,
while one-element and zero-length arrays will be subject to randomization.
Fix a `__randomize_layout` crash in `struct neighbour` by transforming
zero-length array `primary_key` into a proper C99 flexible-array member.
Fixes: 1ee60356c2 ("gcc-plugins: randstruct: Only warn about true flexible arrays")
Closes: https://lore.kernel.org/linux-hardening/20231124102458.GB1503258@e124191.cambridge.arm.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Joey Gouly <joey.gouly@arm.com>
Link: https://lore.kernel.org/r/ZWJoRsJGnCPdJ3+2@work
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e86f32a13 ]
Recently the kernel test robot has reported an ARM-specific BUILD_BUG_ON()
in an old and unmaintained wil6210 wireless driver. The problem comes from
the structure packing rules of old ARM ABI ('-mabi=apcs-gnu'). For example,
the following structure is packed to 18 bytes instead of 16:
struct poorly_packed {
unsigned int a;
unsigned int b;
unsigned short c;
union {
struct {
unsigned short d;
unsigned int e;
} __attribute__((packed));
struct {
unsigned short d;
unsigned int e;
} __attribute__((packed)) inner;
};
} __attribute__((packed));
To fit it into 16 bytes, it's required to add packed attribute to the
container union as well:
struct poorly_packed {
unsigned int a;
unsigned int b;
unsigned short c;
union {
struct {
unsigned short d;
unsigned int e;
} __attribute__((packed));
struct {
unsigned short d;
unsigned int e;
} __attribute__((packed)) inner;
} __attribute__((packed));
} __attribute__((packed));
Thanks to Andrew Pinski of GCC team for sorting the things out at
https://gcc.gnu.org/pipermail/gcc/2023-November/242888.html.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311150821.cI4yciFE-lkp@intel.com
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://lore.kernel.org/r/20231120110607.98956-1-dmantipov@yandex.ru
Fixes: 50d7bd38c3 ("stddef: Introduce struct_group() helper macro")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5d33213fac ]
The problem is this line here from subdev_do_ioctl().
client_cap->capabilities &= ~V4L2_SUBDEV_CLIENT_CAP_STREAMS;
The "client_cap->capabilities" variable is a u64. The AND operation
is supposed to clear out the V4L2_SUBDEV_CLIENT_CAP_STREAMS flag. But
because it's a 32 bit variable it accidentally clears out the high 32
bits as well.
Currently we only use the first bit and none of the upper bits so this
doesn't affect runtime behavior.
Fixes: f57fa29592 ("media: v4l2-subdev: Add new ioctl for client capabilities")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit c392cbecd8 upstream.
If a provided buffer ring is setup with IOU_PBUF_RING_MMAP, then the
kernel allocates the memory for it and the application is expected to
mmap(2) this memory. However, io_uring uses remap_pfn_range() for this
operation, so we cannot rely on normal munmap/release on freeing them
for us.
Stash an io_buf_free entry away for each of these, if any, and provide
a helper to free them post ->release().
Cc: stable@vger.kernel.org
Fixes: c56e022c0a ("io_uring: add support for user mapped provided buffer ring")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
