Commit graph

229,850 commits

Author SHA1 Message Date
Michael Ellerman
b78e0bff85 powerpc: Remove UDBG_RTAS_CONSOLE
The IBM Cell blade support was the last user of UDBG_RTAS_CONSOLE.

Although it's still possible to build it via
PPC_EARLY_DEBUG_UDBG_RTAS_CONSOLE, AFAIK it's not useful on any
other platfoms, because only Cell and JS20 era machines provided the
RTAS get/put-term-char functions.

If anyone is using it or needs it we can always resurrect it from git.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218105523.416573-19-mpe@ellerman.id.au
2025-02-26 21:15:09 +05:30
Michael Ellerman
1b52e091e7 powerpc/io: Use standard barrier macros in io.c
io.c uses open-coded barriers. Update it to use the equivalent but in
macro form.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218105523.416573-18-mpe@ellerman.id.au
2025-02-26 21:15:09 +05:30
Michael Ellerman
76c7d4300d powerpc/io: Rename _insw_ns() etc.
The "_ns" suffix was "historical" in 2006, finally remove it.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218105523.416573-17-mpe@ellerman.id.au
2025-02-26 21:15:09 +05:30
Michael Ellerman
0305292f17 powerpc/io: Use generic raw accessors
The raw accessors are identical to the generic versions, use the generic
versions.

Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218105523.416573-16-mpe@ellerman.id.au
2025-02-26 21:15:09 +05:30
Michael Ellerman
c051451b7a powerpc/io: Spell-out PCI_IO_ADDR
PCI_IO_ADDR is a ppc-ism, which obscures the fact that some of the
powerpc accessors are identical to the generic ones. So remove it and
spell out the type fully.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218105523.416573-15-mpe@ellerman.id.au
2025-02-26 21:15:09 +05:30
Michael Ellerman
8a55941aed powerpc/io: Wrap port calculation in a macro
The calculation of the IO port is repeated several times, wrap it in
a macro, in particular to avoid spelling out the cast multiple times.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218105523.416573-14-mpe@ellerman.id.au
2025-02-26 21:15:08 +05:30
Michael Ellerman
41c8992c02 powerpc/io: Remove unnecessary indirection
Some of the __do_xxx() defines do nothing useful, they just existed to
make the previous hooking macros work. So remove them.

Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218105523.416573-13-mpe@ellerman.id.au
2025-02-26 21:15:08 +05:30
Michael Ellerman
15efd61fa7 powerpc/io: Unhook MMIO accessors
Now that PPC_INDIRECT_MMIO is removed, it's not possible/necessary
to hook any of the "memory" accessors, so turn them back into regular
static inlines, and restrict the hooking mechanism to the "pio"
accessors only.

Move the #defines that signal each routine is implemented next to the
implementation, and update the out-of-date comment.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218105523.416573-12-mpe@ellerman.id.au
2025-02-26 21:15:08 +05:30
Michael Ellerman
de9cc05822 powerpc/io: Remove PCI_FIX_ADDR
Now that PPC_INDIRECT_MMIO is removed, PCI_FIX_ADDR does nothing, so
remove it.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218105523.416573-11-mpe@ellerman.id.au
2025-02-26 21:15:08 +05:30
Michael Ellerman
6584845b3d powerpc/io: Remove PPC_INDIRECT_MMIO
The Cell blade support was the last user of PPC_INDIRECT_MMIO, so it can
now be removed.

PPC_INDIRECT_PIO is still used by Power8 powernv, so it needs to remain.

Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218105523.416573-10-mpe@ellerman.id.au
2025-02-26 21:15:08 +05:30
Michael Ellerman
478e1709ad powerpc/io: Remove PPC_IO_WORKAROUNDS
The Cell blade support was the last user of PPC_IO_WORKAROUNDS, so they
can now be removed.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218105523.416573-9-mpe@ellerman.id.au
2025-02-26 21:15:08 +05:30
Michael Ellerman
f026dffd54 powerpc: Remove PPC_OF_PLATFORM_PCI
The Cell blade support was the last user of PPC_OF_PLATFORM_PCI, so
remove it.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218105523.416573-8-mpe@ellerman.id.au
2025-02-26 21:15:08 +05:30
Michael Ellerman
bd4a83428b powerpc: Remove DCR_MMIO and the DCR generic layer
The Cell blade support was the last user of DCR_MMIO, so it can now
be removed.

That only leaves DCR_NATIVE, meaning the DCR generic layer which allows
using either DCR_NATIVE or DCR_MMIO is also unnecessary, remove it too.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218105523.416573-7-mpe@ellerman.id.au
2025-02-26 21:15:08 +05:30
Michael Ellerman
41cc49efff powerpc/xmon: Remove SPU debug and disassembly
Now that the IBM Cell Blade support is removed, the xmon SPU support is
effectively unusable. That is because PS3 doesn't implement udbg_getc
which is required to send input to xmon.

So remove the xmon SPU support.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218105523.416573-6-mpe@ellerman.id.au
2025-02-26 21:15:08 +05:30
Michael Ellerman
11923e0d9d powerpc/cell: Remove CBE_CPUFREQ_SPU_GOVERNOR
Although this driver is still buildable, it can't actually do anything
in practice now that the low-level cpufreq driver for Cell has been
disabled due to the removal of CBE_RAS.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218105523.416573-5-mpe@ellerman.id.au
2025-02-26 21:15:07 +05:30
Michael Ellerman
de9d1be44e powerpc: Remove IBM_CELL_BLADE & SPIDER_NET references
The symbols are no longer selectable so remove references to them.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218105523.416573-4-mpe@ellerman.id.au
2025-02-26 21:15:07 +05:30
Michael Ellerman
38efe5a9a7 powerpc: Remove PPC_PMI and driver
CONFIG_PPC_PMI is no longer selectable now that PPC_IBM_CELL_BLADE has
been removed, via the dependency on PPC_IBM_CELL_POWERBUTTON.

So remove it and the driver, and the pmi.h header which it was the only
user of.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218105523.416573-3-mpe@ellerman.id.au
2025-02-26 21:15:07 +05:30
Michael Ellerman
8e4f1a3495 powerpc: Remove some Cell leftovers
Now that CONFIG_PPC_CELL_NATIVE is removed, iommu_fixed_is_weak will
always be false, so remove it entirely.

Also remove a hack/quirk in the HTAB code that was only used on Cell.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218105523.416573-2-mpe@ellerman.id.au
2025-02-26 21:15:07 +05:30
Michael Ellerman
05bf59fbee powerpc/cell: Remove support for IBM Cell Blades
IBM Cell Blades used the Cell processor and the "blade" server form
factor. They were sold as models QS20, QS21 & QS22 from roughly 2006 to
2012 [1]. They were used in a few supercomputers (eg. Roadrunner) that
have since been dismantled, and were not that widely used otherwise.

Until recently I still had a working QS22, which meant I was able to
keep the platform support working, but unfortunately that machine has
now died.

I'm not aware of any users. If there is a user that wants to keep the
upstream support working, we can look at bringing some of the code back
as appropriate.

See previous discussion at [2].

Remove the top-level config symbol PPC_IBM_CELL_BLADE, and then
the dependent symbols PPC_CELL_NATIVE, PPC_CELL_COMMON, CBE_RAS,
PPC_IBM_CELL_RESETBUTTON, PPC_IBM_CELL_POWERBUTTON, CBE_THERM, and
AXON_MSI. Then remove the associated C files and headers, and trim
unused header content (some is shared with PS3).

Note that PPC_CELL_COMMON sounds like it would build code shared with
PS3, but it does not. It's a relic from when code was shared between the
Blade support and QPACE support.

Most of the primary authors already have CREDITS entries, with the
exception of Christian, so add one for him.

[1]: https://www.theregister.com/2011/06/28/ibm_kills_qs22_blade
[2]: https://lore.kernel.org/linuxppc-dev/60581044-df82-40ad-b94c-56468007a93e@app.fastmail.com

Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jeremy Kerr <jk@ozlabs.org>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20241218105523.416573-1-mpe@ellerman.id.au
2025-02-26 21:15:07 +05:30
Christophe Leroy
f50b45626e powerpc/static_call: Implement inline static calls
Implement inline static calls:
- Put a 'bl' to the destination function ('b' if tail call)
- Put a 'nop' when the destination function is NULL ('blr' if tail call)
- Put a 'li r3,0' when the destination is the RET0 function and not
a tail call.

If the destination is too far (over the 32Mb limit), go via the
trampoline.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/3dbd0b2ba577c942729235d0211d04a406653d81.1733245362.git.christophe.leroy@csgroup.eu
2025-02-26 21:09:43 +05:30
Christophe Leroy
6626f98ed5 powerpc: Prepare arch_static_call_transform() for supporting inline static calls
Reorganise arch_static_call_transform() in order to ease the support
of inline static calls in following patch:
- remove 'target' to nhide whether it is a 'return 0' or not.
- Don't bail out if 'tramp' is NULL, just do nothing until next patch.

Note that 'target' was 'tramp + PPC_SCT_RET0', is_short was perforce
true. So in the 'if (func && !is_short)' leg, target was perforce
equal to 'func'.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/7a8b9245e773307c315c2548a4c6cad570ac2648.1733245362.git.christophe.leroy@csgroup.eu
2025-02-26 21:09:43 +05:30
Christophe Leroy
d856bc3ac7 static_call_inline: Provide trampoline address when updating sites
In preparation of support of inline static calls on powerpc, provide
trampoline address when updating sites, so that when the destination
function is too far for a direct function call, the call site is
patched with a call to the trampoline.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/5efe0cffc38d6f69b1ec13988a99f1acff551abf.1733245362.git.christophe.leroy@csgroup.eu
2025-02-26 21:09:43 +05:30
Gautam Menghani
65acbd1285 arch/powerpc: Remove unused function icp_native_cause_ipi_rm()
Remove icp_native_cause_ipi_rm() as it has no callers since
commit 53af3ba2e819("KVM: PPC: Book3S HV: Allow guest exit path to have
MMU on")

Signed-off-by: Gautam Menghani <gautam@linux.ibm.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250101134251.436679-1-gautam@linux.ibm.com
2025-02-24 12:26:21 +05:30
Christophe Leroy
f17bcb97ed powerpc/time: Define div128_by_32() static and __init
div128_by_32() used to be called from outside time.c in the old days
but since v2.6.15 it hasn't been used outside time.c

$ git grep div128_by_32 v2.6.14
v2.6.14:arch/ppc64/kernel/iSeries_setup.c:	div128_by_32(1024 * 1024, 0, tb_ticks_per_sec, &divres);
v2.6.14:arch/ppc64/kernel/pmac_time.c:	div128_by_32( 1024*1024, 0, tb_ticks_per_sec, &divres );
v2.6.14:arch/ppc64/kernel/time.c:				div128_by_32( XSEC_PER_SEC, 0, tb_ticks_per_sec, &divres );
v2.6.14:arch/ppc64/kernel/time.c:	div128_by_32(1024*1024, 0, tb_ticks_per_sec, &divres);
v2.6.14:arch/ppc64/kernel/time.c:	div128_by_32(1000000000, 0, tb_ticks_per_sec, &res);
v2.6.14:arch/ppc64/kernel/time.c:	div128_by_32( 1024*1024, 0, new_tb_ticks_per_sec, &divres );
v2.6.14:arch/ppc64/kernel/time.c:void div128_by_32( unsigned long dividend_high, unsigned long dividend_low,
v2.6.14:include/asm-ppc64/time.h:void div128_by_32( unsigned long dividend_high, unsigned long dividend_low,

$ git grep div128_by_32 v2.6.15
v2.6.15:arch/powerpc/kernel/time.c:				div128_by_32( XSEC_PER_SEC, 0, tb_ticks_per_sec, &divres );
v2.6.15:arch/powerpc/kernel/time.c:	div128_by_32(1024*1024, 0, tb_ticks_per_sec, &res);
v2.6.15:arch/powerpc/kernel/time.c:	div128_by_32(1000000000, 0, tb_ticks_per_sec, &res);
v2.6.15:arch/powerpc/kernel/time.c:	div128_by_32(1024*1024, 0, new_tb_ticks_per_sec, &divres);
v2.6.15:arch/powerpc/kernel/time.c:void div128_by_32(u64 dividend_high, u64 dividend_low,
v2.6.15:include/asm-powerpc/time.h:extern void div128_by_32(u64 dividend_high, u64 dividend_low,

Move it above its only caller which is time_init() and define it
static and __init.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/50810349bf1eee378fbeab72a36e4b6553a60c3d.1738749246.git.christophe.leroy@csgroup.eu
2025-02-24 12:26:21 +05:30
Christophe Leroy
67d9391597 powerpc/ipic: Stop printing address of registers
The following line appears at boot:

	IPIC (128 IRQ sources) at (ptrval)

This is pointless so remove the printing of the virtual address and
replace it by matching physical address.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/ecffb21d88405f99e7ffc906a733396c57c36d50.1736405302.git.christophe.leroy@csgroup.eu
2025-02-24 12:26:21 +05:30
Christophe Leroy
2bf3caa7cc powerpc/32: Stop printing Kernel virtual memory layout
Printing of Kernel virtual memory layout was added for debug purpose
by commit f637a49e50 ("powerpc: Minor cleanups of kernel virt
address space definitions")

For security reasons, don't display the kernel's virtual memory layout.

Other architectures have removed it through following commits.

Commit 071929dbdd ("arm64: Stop printing the virtual memory layout")
Commit 1c31d4e96b ("ARM: 8820/1: mm: Stop printing the virtual memory layout")
Commit 31833332f7 ("m68k/mm: Stop printing the virtual memory layout")
Commit fd8d0ca256 ("parisc: Hide virtual kernel memory layout")
Commit 681ff0181b ("x86/mm/init/32: Stop printing the virtual memory layout")

Commit 681ff0181b ("x86/mm/init/32: Stop printing the virtual memory
layout") thought x86 was the last one, but in reality powerpc/32 still
had it.

So remove it now on powerpc/32 as well.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Kees Cook <kees@kernel.org>
[Maddy: Added "Commit" in commit message to avoid checkpatch error]
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/430bc8c1f2ff2eb9224b04450e22db472b0b9fa9.1736361630.git.christophe.leroy@csgroup.eu
2025-02-24 12:26:21 +05:30
Christophe Leroy
2c1cbbab62 powerpc/vmlinux: Remove etext, edata and end
etext is not used anymore since commit 843a1ffaf6 ("powerpc/mm: use
core_kernel_text() helper")

edata and end have not been used since the merge of arch/ppc/ and
arch/ppc64/

Remove the three and remove macro PROVIDE32.

Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/d1686d36cdd6b9d681e7ee4dd677c386d43babb1.1736332415.git.christophe.leroy@csgroup.eu
2025-02-24 12:26:21 +05:30
Christophe Leroy
779c501cab powerpc/44x: Declare primary_uic static in uic.c
primary_uic is not used outside uic.c, declare it static.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202411101746.lD8YdVzY-lkp@intel.com/
Fixes: e58923ed14 ("[POWERPC] Add arch/powerpc driver for UIC, PPC4xx interrupt controller")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/0e11233d30333610ab460b3a1fd0f43c3a51e34d.1736331884.git.christophe.leroy@csgroup.eu
2025-02-24 12:26:21 +05:30
Gaurav Batra
6aa989ab2b powerpc/pseries/iommu: memory notifier incorrectly adds TCEs for pmemory
iommu_mem_notifier() is invoked when RAM is dynamically added/removed. This
notifier call is responsible to add/remove TCEs from the Dynamic DMA Window
(DDW) when TCEs are pre-mapped. TCEs are pre-mapped only for RAM and not
for persistent memory (pmemory). For DMA buffers in pmemory, TCEs are
dynamically mapped when the device driver instructs to do so.

The issue is 'daxctl' command is capable of adding pmemory as "System RAM"
after LPAR boot. The command to do so is -

daxctl reconfigure-device --mode=system-ram dax0.0 --force

This will dynamically add pmemory range to LPAR RAM eventually invoking
iommu_mem_notifier(). The address range of pmemory is way beyond the Max
RAM that the LPAR can have. Which means, this range is beyond the DDW
created for the device, at device initialization time.

As a result when TCEs are pre-mapped for the pmemory range, by
iommu_mem_notifier(), PHYP HCALL returns H_PARAMETER. This failed the
command, daxctl, to add pmemory as RAM.

The solution is to not pre-map TCEs for pmemory.

Signed-off-by: Gaurav Batra <gbatra@linux.ibm.com>
Tested-by: Donet Tom <donettom@linux.ibm.com>
Reviewed-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250130183854.92258-1-gbatra@linux.ibm.com
2025-02-11 11:39:10 +05:30
Gaurav Batra
67dfc11982 powerpc/pseries/iommu: create DDW for devices with DMA mask less than 64-bits
Starting with PAPR level 2.13, platform supports placing PHB in limited
address mode. Devices that support DMA masks less that 64-bit but greater
than 32-bits are placed in limited address mode. In this mode, the
starting DMA address returned by the DDW is 4GB.

When the device driver calls dma_supported, with mask less then 64-bit, the
PowerPC IOMMU driver places PHB in the Limited Addressing Mode before
creating DDW.

Signed-off-by: Gaurav Batra <gbatra@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250108164814.73250-1-gbatra@linux.ibm.com
2025-02-11 11:38:41 +05:30
Abhishek Dubey
81c3d637c3 powerpc/pseries: Export hardware trace macro dump via debugfs
This patch adds debugfs interface to export Hardware Trace Macro (HTM)
function data in a LPAR. New hypervisor call "H_HTM" has been
defined to setup, configure, control and dump the HTM data.
This patch supports only dumping of HTM data in a LPAR.
New debugfs folder called "htmdump" has been added under
/sys/kernel/debug/arch path which contains files need to
pass required parameters for the H_HTM dump function. New Kconfig
option called "CONFIG_HTMDUMP" is added in platform/pseries
for the same.

With this module loaded, list of files in debugfs path

/sys/kernel/debug/powerpc/htmdump
coreindexonchip  htmtype  nodalchipindex  nodeindex  trace

Signed-off-by: Abhishek Dubey <adubey@linux.ibm.com>
Co-developed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250113164039.302017-2-adubey@linux.ibm.com
2025-02-11 11:35:45 +05:30
Abhishek Dubey
708220ae50 powerpc/pseries: Macros and wrapper functions for H_HTM call
Define macros and wrapper functions to handle
H_HTM (Hardware Trace Macro) hypervisor call.
H_HTM is new HCALL added to export data from
Hardware Trace Macro (HTM) function.

Signed-off-by: Abhishek Dubey <adubey@linux.ibm.com>
Co-developed-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250113164039.302017-1-adubey@linux.ibm.com
2025-02-11 11:35:45 +05:30
Athira Rajeev
f848e7ee15 arch/powerpc/perf: Update get_mem_data_src function to use saved values of sier and mmcra regs
During performance monitor interrupt handling, the regs are setup using
perf_read_regs function. Here some of the pt_regs fields is overloaded.
Samples Instruction Event Register (SIER) is loaded into pt_regs,
overloading regs->dar. And regs->dsisr to store MMCRA (Monitor Mode
Control Register A) so that we only need to read these once on each
interrupt.

Update the isa207_get_mem_data_src function to use regs->dar instead of
reading from SPRN_SIER again. Also use regs->dsisr to read the mmcra
value

Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250121131621.39054-2-atrajeev@linux.vnet.ibm.com
2025-02-11 11:33:11 +05:30
Athira Rajeev
2ffb26afa6 arch/powerpc/perf: Check the instruction type before creating sample with perf_mem_data_src
perf mem report aborts as below sometimes (during some corner
case) in powerpc:

   # ./perf mem report 1>out
   *** stack smashing detected ***: terminated
   Aborted (core dumped)

The backtrace is as below:
   __pthread_kill_implementation ()
   raise ()
   abort ()
   __libc_message
   __fortify_fail
   __stack_chk_fail
   hist_entry.lvl_snprintf
   __sort__hpp_entry
   __hist_entry__snprintf
   hists.fprintf
   cmd_report
   cmd_mem

Snippet of code which triggers the issue
from tools/perf/util/sort.c

   static int hist_entry__lvl_snprintf(struct hist_entry *he, char *bf,
                                    size_t size, unsigned int width)
   {
        char out[64];

        perf_mem__lvl_scnprintf(out, sizeof(out), he->mem_info);
        return repsep_snprintf(bf, size, "%-*s", width, out);
   }

The value of "out" is filled from perf_mem_data_src value.
Debugging this further showed that for some corner cases, the
value of "data_src" was pointing to wrong value. This resulted
in bigger size of string and causing stack check fail.

The perf mem data source values are captured in the sample via
isa207_get_mem_data_src function. The initial check is to fetch
the type of sampled instruction. If the type of instruction is
not valid (not a load/store instruction), the function returns.

Since 'commit e16fd7f2cb ("perf: Use sample_flags for data_src")',
data_src field is not initialized by the perf_sample_data_init()
function. If the PMU driver doesn't set the data_src value to zero if
type is not valid, this will result in uninitailised value for data_src.
The uninitailised value of data_src resulted in stack check fail
followed by abort for "perf mem report".

When requesting for data source information in the sample, the
instruction type is expected to be load or store instruction.
In ISA v3.0, due to hardware limitation, there are corner cases
where the instruction type other than load or store is observed.
In ISA v3.0 and before values "0" and "7" are considered reserved.
In ISA v3.1, value "7" has been used to indicate "larx/stcx".
Drop the sample if instruction type has reserved values for this
field with a ISA version check. Initialize data_src to zero in
isa207_get_mem_data_src if the instruction type is not load/store.

Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250121131621.39054-1-atrajeev@linux.vnet.ibm.com
2025-02-11 11:33:11 +05:30
Avnish Chouhan
fdc44538d5 powerpc: increase MIN RMA size for CAS negotiation
Change RMA size from 512 MB to 768 MB which will result
in more RMA at boot time for PowerPC. When PowerPC LPAR use/uses vTPM,
Secure Boot or FADump, the 512 MB RMA memory is not sufficient for
booting. With this 512 MB RMA, GRUB2 run out of memory and unable to
load the necessary. Sometimes even usage of CDROM which requires more
memory for installation along with the options mentioned above troubles
the boot memory and result in boot failures. Increasing the RMA size
will resolves multiple out of memory issues observed in PowerPC.

Failure details:

1. GRUB2

kern/ieee1275/init.c:550: mm requested region of size 8513000, flags 1
kern/ieee1275/init.c:563: Cannot satisfy allocation and retain minimum runtime
space
kern/ieee1275/init.c:550: mm requested region of size 8513000, flags 0
kern/ieee1275/init.c:563: Cannot satisfy allocation and retain minimum runtime
space
kern/file.c:215: Closing `/ppc/ppc64/initrd.img' ...
kern/disk.c:297: Closing
`ieee1275//vdevice/v-scsi
@30000067/disk@8300000000000000'...
kern/disk.c:311: Closing
`ieee1275//vdevice/v-scsi
@30000067/disk@8300000000000000' succeeded.
kern/file.c:225: Closing `/ppc/ppc64/initrd.img' failed with 3.
kern/file.c:148: Opening `/ppc/ppc64/initrd.img' succeeded.
error: ../../grub-core/kern/mm.c:552:out of memory.

2. Kernel

[    0.777633] List of all partitions:
[    0.777639] No filesystem could mount root, tried:
[    0.777640]
[    0.777649] Kernel panic - not syncing: VFS: Unable to mount root fs on "" or unknown-block(0,0)
[    0.777658] CPU: 17 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.11.0-0.rc4.20.el10.ppc64le #1
[    0.777669] Hardware name: IBM,9009-22A POWER9 (architected) 0x4e0202 0xf000005 of:IBM,FW950.B0 (VL950_149) hv:phyp pSeries
[    0.777678] Call Trace:
[    0.777682] [c000000003db7b60] [c000000001119714] dump_stack_lvl+0x88/0xc4 (unreliable)
[    0.777700] [c000000003db7b90] [c00000000016c274] panic+0x174/0x460
[    0.777711] [c000000003db7c30] [c00000000200631c] mount_root_generic+0x320/0x354
[    0.777724] [c000000003db7d00] [c0000000020066f8] prepare_namespace+0x27c/0x2f4
[    0.777735] [c000000003db7d90] [c000000002005824] kernel_init_freeable+0x254/0x294
[    0.777747] [c000000003db7df0] [c00000000001131c] kernel_init+0x30/0x1c4
[    0.777757] [c000000003db7e50] [c00000000000debc] ret_from_kernel_user_thread+0x14/0x1c
[    0.777768] --- interrupt: 0 at 0x0
[    0.784238] pstore: backend (nvram) writing error (-1)
[    0.790447] Rebooting in 10 seconds..

Signed-off-by: Avnish Chouhan <avnish@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250123114254.200527-4-sourabhjain@linux.ibm.com
2025-02-11 10:53:00 +05:30
Sourabh Jain
b7bb460624 powerpc/fadump: fix additional param memory reservation for HASH MMU
Commit 683eab94da ("powerpc/fadump: setup additional parameters for
dump capture kernel") introduced the additional parameter feature in
fadump for HASH MMU with the understanding that GRUB does not use the
memory area between 640MB and 768MB for its operation.

However, the third patch in this series ("powerpc: increase MIN RMA
size for CAS negotiation") changes the MIN RMA size to 768MB, allowing
GRUB to use memory up to 768MB. This makes the fadump reservation for
the additional parameter feature for HASH MMU unreliable.

To address this, adjust the memory range for the additional parameter in
fadump for HASH MMU. This will ensure that GRUB does not overwrite the
memory reserved for fadump's additional parameter in HASH MMU.

The new policy for the memory range for the additional parameter in HASH
MMU is that the first memory block must be larger than the MIN_RMA size,
as the bootloader can use memory up to the MIN_RMA size. The range
should be between MIN_RMA and the RMA size (ppc64_rma_size), and it must
not overlap with the fadump reserved area.

Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Reviewed-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250123114254.200527-3-sourabhjain@linux.ibm.com
2025-02-11 10:53:00 +05:30
Sourabh Jain
0bdd7ff5b8 powerpc: export MIN RMA size
Commit 683eab94da ("powerpc/fadump: setup additional parameters for
dump capture kernel") introduced the additional parameter feature in
fadump for HASH MMU with the understanding that GRUB does not use the
memory area between 640MB and 768MB for its operation.

However, the third patch ("powerpc: increase MIN RMA size for CAS
negotiation") in this series is changing the MIN RMA size to 768MB,
allowing GRUB to use memory up to 768MB. This makes the fadump
reservation for the additional parameter feature for HASH MMU
unreliable.

To address this, export the MIN_RMA so that the next patch
("powerpc/fadump: fix additional param memory reservation for HASH MMU")
can identify the correct memory range for the additional parameter
feature in fadump for HASH MMU.

Reviewed-by: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250123114254.200527-2-sourabhjain@linux.ibm.com
2025-02-11 10:52:59 +05:30
Linus Torvalds
954a209f43 ARM:
* Correctly clean the BSS to the PoC before allowing EL2 to access it
   on nVHE/hVHE/protected configurations
 
 * Propagate ownership of debug registers in protected mode after
   the rework that landed in 6.14-rc1
 
 * Stop pretending that we can run the protected mode without a GICv3
   being present on the host
 
 * Fix a use-after-free situation that can occur if a vcpu fails to
   initialise the NV shadow S2 MMU contexts
 
 * Always evaluate the need to arm a background timer for fully emulated
   guest timers
 
 * Fix the emulation of EL1 timers in the absence of FEAT_ECV
 
 * Correctly handle the EL2 virtual timer, specially when HCR_EL2.E2H==0
 
 s390:
 
 * move some of the guest page table (gmap) logic into KVM itself,
   inching towards the final goal of completely removing gmap from the
   non-kvm memory management code. As an initial set of cleanups, move
   some code from mm/gmap into kvm and start using __kvm_faultin_pfn()
   to fault-in pages as needed; but especially stop abusing page->index
   and page->lru to aid in the pgdesc conversion.
 
 x86:
 
 * Add missing check in the fix to defer starting the huge page recovery
   vhost_task
 
 * SRSO_USER_KERNEL_NO does not need SYNTHESIZED_F
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmemTnEUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroP97gf/Rew+yEsRrHVk/j0R2XwFx51raYZy
 eaicv07jYmwsnaALq6BEj4xxDW8dJEJgj05Czm1o9+9x8nvY2+UjT2q4J8fY9xdD
 Yr+5GvEEz4x2GNL3ZYE3iHTNFQckNxOgMilLW3br1E+wjusShKmgGxPYTRyClQ34
 gDBZQWzOG22UNC6PbW9dgTK54b57+NJdIZYuHz4LkMsTvzf6jXo5VumsgbbZqC4e
 VGh5EUEPL7+cNzGY/+WURXI6OojdPzbneH1NP82uT3lo2WaHK9+B3N6H+W71N/T4
 u1P7+g0WmdNj3FITvDpTJ7jNhke2atEjI9rvtHz6gwtf9SIujyuNl55uRA==
 =r0h9
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
 "ARM:

   - Correctly clean the BSS to the PoC before allowing EL2 to access it
     on nVHE/hVHE/protected configurations

   - Propagate ownership of debug registers in protected mode after the
     rework that landed in 6.14-rc1

   - Stop pretending that we can run the protected mode without a GICv3
     being present on the host

   - Fix a use-after-free situation that can occur if a vcpu fails to
     initialise the NV shadow S2 MMU contexts

   - Always evaluate the need to arm a background timer for fully
     emulated guest timers

   - Fix the emulation of EL1 timers in the absence of FEAT_ECV

   - Correctly handle the EL2 virtual timer, specially when HCR_EL2.E2H==0

  s390:

   - move some of the guest page table (gmap) logic into KVM itself,
     inching towards the final goal of completely removing gmap from the
     non-kvm memory management code.

     As an initial set of cleanups, move some code from mm/gmap into kvm
     and start using __kvm_faultin_pfn() to fault-in pages as needed;
     but especially stop abusing page->index and page->lru to aid in the
     pgdesc conversion.

  x86:

   - Add missing check in the fix to defer starting the huge page
     recovery vhost_task

   - SRSO_USER_KERNEL_NO does not need SYNTHESIZED_F"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (31 commits)
  KVM: x86/mmu: Ensure NX huge page recovery thread is alive before waking
  KVM: remove kvm_arch_post_init_vm
  KVM: selftests: Fix spelling mistake "initally" -> "initially"
  kvm: x86: SRSO_USER_KERNEL_NO is not synthesized
  KVM: arm64: timer: Don't adjust the EL2 virtual timer offset
  KVM: arm64: timer: Correctly handle EL1 timer emulation when !FEAT_ECV
  KVM: arm64: timer: Always evaluate the need for a soft timer
  KVM: arm64: Fix nested S2 MMU structures reallocation
  KVM: arm64: Fail protected mode init if no vgic hardware is present
  KVM: arm64: Flush/sync debug state in protected mode
  KVM: s390: selftests: Streamline uc_skey test to issue iske after sske
  KVM: s390: remove the last user of page->index
  KVM: s390: move PGSTE softbits
  KVM: s390: remove useless page->index usage
  KVM: s390: move gmap_shadow_pgt_lookup() into kvm
  KVM: s390: stop using lists to keep track of used dat tables
  KVM: s390: stop using page->index for non-shadow gmaps
  KVM: s390: move some gmap shadowing functions away from mm/gmap.c
  KVM: s390: get rid of gmap_translate()
  KVM: s390: get rid of gmap_fault()
  ...
2025-02-09 09:41:38 -08:00
Linus Torvalds
8b0582f509 execve fix for v6.14-rc2
- alpha/elf: Fix misc/setarch test of util-linux by removing 32bit support
   (Eric W. Biederman)
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRSPkdeREjth1dHnSE2KwveOeQkuwUCZ6e+TgAKCRA2KwveOeQk
 u/48AQC+DeV54+UA08YV+RdlZfCydMyDkCfdBcV6tcExs4C4tgD/RCRsfyPTB1oj
 PXVONVL88M6IYBIvtgYAzDcPpZuRBQ4=
 =qCPe
 -----END PGP SIGNATURE-----

Merge tag 'execve-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull execve fix from Kees Cook:
 "This is an alpha-specific fix, but since it touched ELF I was asked to
  carry it.

   - alpha/elf: Fix misc/setarch test of util-linux by removing 32bit
     support (Eric W. Biederman)"

* tag 'execve-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  alpha/elf: Fix misc/setarch test of util-linux by removing 32bit support
2025-02-08 13:59:24 -08:00
Linus Torvalds
a5057ded6e Fix a build regression on GCC 15 builds, caused by
GCC changing the default C version that is overriden
 in the main Makefile but not in the x86 boot code
 Makefile.
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmenJE0RHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1jDlw/+NIZi556JHCncSBt/rnTSNcEGC56Ie940
 A5WWUfgtMEVB2eEN47As3rranu9XhSN4iq0THWcjW2W6QZWGPBbncAkcnrfDMFKa
 JDokQXe9IyAk17iqu0HmVEiPPxvKwzmD8iH/vc9hSTFAsDeplFzJLk1qgvysZdhH
 OU+LhSI/TDJZmzQpd89+AFwTl8Afa64db7sfPxXtjI89ccsCnHD6K7t8Y3EsW6lx
 xjFY53/wShlyDuO5dgBeyC8oOagLOKVCftRIh913PCyfwx7XWkCuTFimJdg+oZN2
 tJcr7T7cNGNhesWaUxKmOBOtIFANecpKCLCpQKJnbPik8mqKZ9mFvY2k8litAX1x
 bzj+Y/RuztGcJUL+FCl0ygzEI7IVj0pHPm+FJPIHQ17antTh1my4cIKn+7YlLhGJ
 Z0eodbg/SRUKtNfp0qyj03oCTOrbnr4dE5qkS4BDnnr7hlMABGo/bPlxYQMOrDv2
 jvch1KalP6VLE/cH0Wlqxkx5JMVQe7HfdB9KWfOVtLBisfq3lH40SXup8/pz0A7t
 i6qvUTH3aPL2Byr8lQpb2NkoUMLW6a0jXQII2Bu58a/NXfC45Wqww8Ad7C6T6Qbz
 049Cc0RUMHELkQ/NdDx6RgMIn4KSf2eb1tCqK4Hw/TqwvBsZFizA9kySQskrhL49
 x5yzt/OJqC8=
 =x1bT
 -----END PGP SIGNATURE-----

Merge tag 'x86-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fix from Ingo Molnar:
 "Fix a build regression on GCC 15 builds, caused by GCC changing the
  default C version that is overriden in the main Makefile but not in
  the x86 boot code Makefile"

* tag 'x86-urgent-2025-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Use '-std=gnu11' to fix build with GCC 15
2025-02-08 12:04:00 -08:00
Geert Uytterhoeven
29a61a1f40 genirq: Remove leading space from irq_chip::irq_print_chip() callbacks
The space separator was factored out from the multiple chip name prints,
but several irq_chip::irq_print_chip() callbacks still print a leading
space.  Remove the superfluous double spaces.

Fixes: 9d9f204bdf ("genirq/proc: Add missing space separator back")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/893f7e9646d8933cd6786d5a1ef3eb076d263768.1738764803.git.geert+renesas@glider.be
2025-02-07 08:56:01 +01:00
Linus Torvalds
5b734b49de xen: branch for v6.14-rc2
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCZ6Ti7AAKCRCAXGG7T9hj
 vqTVAP4iQCeMzxPJoHteWm9ihOyIpHZ+5Kimhle/irUmAYC5OwD/St7EdmY3MiZd
 sMRNrW3dFBvOQkgnysRw7OOaP8GUfgY=
 =DT9D
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-6.14-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen fixes from Juergen Gross:
 "Three fixes for xen_hypercall_hvm() that was introduced in the 6.13
  cycle"

* tag 'for-linus-6.14-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  x86/xen: remove unneeded dummy push from xen_hypercall_hvm()
  x86/xen: add FRAME_END to xen_hypercall_hvm()
  x86/xen: fix xen_hypercall_hvm() to not clobber %rbx
2025-02-06 12:25:35 -08:00
Eric W. Biederman
b029628be2 alpha/elf: Fix misc/setarch test of util-linux by removing 32bit support
Richard Henderson <richard.henderson@linaro.org> writes[1]:

> There was a Spec benchmark (I forget which) which was memory bound and ran
> twice as fast with 32-bit pointers.
>
> I copied the idea from DEC to the ELF abi, but never did all the other work
> to allow the toolchain to take advantage.
>
> Amusingly, a later Spec changed the benchmark data sets to not fit into a
> 32-bit address space, specifically because of this.
>
> I expect one could delete the ELF bit and personality and no one would
> notice. Not even the 10 remaining Alpha users.

In [2] it was pointed out that parts of setarch weren't working
properly on alpha because it has it's own SET_PERSONALITY
implementation.  In the discussion that followed Richard Henderson
pointed out that the 32bit pointer support for alpha was never
completed.

Fix this by removing alpha's 32bit pointer support.

As a bit of paranoia refuse to execute any alpha binaries that have
the EF_ALPHA_32BIT flag set.  Just in case someone somewhere has
binaries that try to use alpha's 32bit pointer support.

Link: https://lkml.kernel.org/r/CAFXwXrkgu=4Qn-v1PjnOR4SG0oUb9LSa0g6QXpBq4ttm52pJOQ@mail.gmail.com [1]
Link: https://lkml.kernel.org/r/20250103140148.370368-1-glaubitz@physik.fu-berlin.de [2]
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/87y0zfs26i.fsf_-_@email.froward.int.ebiederm.org
Signed-off-by: Kees Cook <kees@kernel.org>
2025-02-06 07:35:38 -08:00
Juergen Gross
aaf5eefd37 x86/xen: remove unneeded dummy push from xen_hypercall_hvm()
Stack alignment of the kernel in 64-bit mode is 8, not 16, so the
dummy push in xen_hypercall_hvm() for aligning the stack to 16 bytes
can be removed.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
2025-02-05 17:23:22 +01:00
Juergen Gross
0bd797b801 x86/xen: add FRAME_END to xen_hypercall_hvm()
xen_hypercall_hvm() is missing a FRAME_END at the end, add it.

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202502030848.HTNTTuo9-lkp@intel.com/
Fixes: b4845bb638 ("x86/xen: add central hypercall functions")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
2025-02-05 17:23:20 +01:00
Juergen Gross
98a5cfd232 x86/xen: fix xen_hypercall_hvm() to not clobber %rbx
xen_hypercall_hvm(), which is used when running as a Xen PVH guest at
most only once during early boot, is clobbering %rbx. Depending on
whether the caller relies on %rbx to be preserved across the call or
not, this clobbering might result in an early crash of the system.

This can be avoided by using an already saved register instead of %rbx.

Fixes: b4845bb638 ("x86/xen: add central hypercall functions")
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
2025-02-05 17:23:15 +01:00
Sean Christopherson
43fb96ae78 KVM: x86/mmu: Ensure NX huge page recovery thread is alive before waking
When waking a VM's NX huge page recovery thread, ensure the thread is
actually alive before trying to wake it.  Now that the thread is spawned
on-demand during KVM_RUN, a VM without a recovery thread is reachable via
the related module params.

  BUG: kernel NULL pointer dereference, address: 0000000000000040
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
  RIP: 0010:vhost_task_wake+0x5/0x10
  Call Trace:
   <TASK>
   set_nx_huge_pages+0xcc/0x1e0 [kvm]
   param_attr_store+0x8a/0xd0
   module_attr_store+0x1a/0x30
   kernfs_fop_write_iter+0x12f/0x1e0
   vfs_write+0x233/0x3e0
   ksys_write+0x60/0xd0
   do_syscall_64+0x5b/0x160
   entry_SYSCALL_64_after_hwframe+0x4b/0x53
  RIP: 0033:0x7f3b52710104
   </TASK>
  Modules linked in: kvm_intel kvm
  CR2: 0000000000000040

Fixes: 931656b9e2 ("kvm: defer huge page recovery vhost task to later")
Cc: stable@vger.kernel.org
Cc: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20250124234623.3609069-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2025-02-04 11:28:21 -05:00
Paolo Bonzini
6f61269495 KVM: remove kvm_arch_post_init_vm
The only statement in a kvm_arch_post_init_vm implementation
can be moved into the x86 kvm_arch_init_vm.  Do so and remove all
traces from architecture-independent code.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2025-02-04 11:27:45 -05:00
Paolo Bonzini
5e21d0c5b9 KVM/arm64 fixes for 6.14, take #1
- Correctly clean the BSS to the PoC before allowing EL2 to access it
   on nVHE/hVHE/protected configurations
 
 - Propagate ownership of debug registers in protected mode after
   the rework that landed in 6.14-rc1
 
 - Stop pretending that we can run the protected mode without a GICv3
   being present on the host
 
 - Fix a use-after-free situation that can occur if a vcpu fails to
   initialise the NV shadow S2 MMU contexts
 
 - Always evaluate the need to arm a background timer for fully emulated
   guest timers
 
 - Fix the emulation of EL1 timers in the absence of FEAT_ECV
 
 - Correctly handle the EL2 virtual timer, specially when HCR_EL2.E2H==0
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmeiNZsACgkQI9DQutE9
 ekOmiQ//WsCDESxdg+kezCCmx9yHo8CM5tsOqzcDoIz+KV5aiLB6KlegGbciC9MZ
 Fgj8lBr+Mu2GGEhYP/H6glqMLB8VPLiGYzwbeBE8ty2IH5Nn6M9hiKFWTZJVpGma
 gNDtFVSO39d39gtklQ4Y3SYSlN0dN2wW47pXxlZiY/aD9GRie7z2m1yC3T05xVpR
 TT7XAYjucfx0Cj8vK9MaJyyy69TXsqocdAxZI+ZCp+NI1yuBv7sunjDdfPcp9n4G
 Lk+Ikn39FC3qlrjZ38eHidMgY6LQvucrwtlvDuPp7yMuNYTXW6UEIU7RUF1AUts4
 IsKKvENV0zLsmtoEAgSa4d9Rtid3eomyll6mb3hBF+1GSBf7+v+sgKdpoB7/mOyn
 exGEbYCOXghXswhF9up2YC6jI8XtcO/2nTt6PdS2nMK61mvCb31u6xFvU0yTEMQW
 dEDVTcIKmvKrAeVzNOBNNjZj0bGNns0P5+oLFbkOzYj8qNueYS0Y9o996kqODET2
 d4J8xib6Mh0cr6usgj0Z8Jp+7vl9Li9KR0SSQqiQyOQcu5St0zidJeCf7J46HCR7
 5d8sQi6lYZ+G+9rm0X7Rl8+yBaUhrUs9v+jOAip3M+1fIxIWr9DyDUcQQKv+obW0
 KqyMWx4Fv+bDqBqTRdd1r6KQEpLL0DbeWinNrdJdVZkmLyI1Y98=
 =idVr
 -----END PGP SIGNATURE-----

Merge tag 'kvmarm-fixes-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.14, take #1

- Correctly clean the BSS to the PoC before allowing EL2 to access it
  on nVHE/hVHE/protected configurations

- Propagate ownership of debug registers in protected mode after
  the rework that landed in 6.14-rc1

- Stop pretending that we can run the protected mode without a GICv3
  being present on the host

- Fix a use-after-free situation that can occur if a vcpu fails to
  initialise the NV shadow S2 MMU contexts

- Always evaluate the need to arm a background timer for fully emulated
  guest timers

- Fix the emulation of EL1 timers in the absence of FEAT_ECV

- Correctly handle the EL2 virtual timer, specially when HCR_EL2.E2H==0
2025-02-04 11:14:53 -05:00
Paolo Bonzini
35441cdd50 - some selftest fixes
- move some kvm-related functions from mm into kvm
 - remove all usage of page->index and page->lru from kvm
 - fixes and cleanups for vsie
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEoWuZBM6M3lCBSfTnuARItAMU6BMFAmecrk4ACgkQuARItAMU
 6BOnEw/+IKRVjfEdn2dbHu9PpEqphnnV7DtmfYn8+XRM9RU8hKIRzRFN7wfmVcSt
 Uz1tMCEQORSI6kYim+M5lbsIwtyeAEtrfA7hj7iZrAVbV9PXvYYPdIZBeeKbNvhc
 ScHYqfhbECaSrHJNi8+0ZG3vEO8yFhIgdst11UsxczR97S5GSt5d+7E4pbXpV3Ij
 wDbjIwSv9cUQzVV80Gt39VxxLZZti+z5Kch4RYgM2QhPFXag7Ja7F1XCDxiMHYj8
 YdQu2ayhEd5erdgmrwB+OFfFk280j13Ml/QYH+u0lBl11Yzc5spM/x+pb5dzuQwy
 I1tloWPHB4mgEbpINHHDJqVqQNGXlA5YSosESMNSS8kY7xGGbbZKR36kv61TiaRF
 kOA/KwffKOvMJHOIiE6ZPp5+vkYGrAeUK9c1s6dl3sug87dZ9hijqWCfa/1TkdnX
 VJT03JOuRAAzYEv1yp0bcPdA2Ex0ArDRA9jowqum2xKbwjYAL4EKozmYPG4kLarW
 tjXoC+Yy0z/U3qMsqRwcGhvGVP/Pau0/LeRsZK0udT0yz1a2na5snCHrPyXaxRrp
 qHZObCVPB+0IGxe1Rj8utnB3nUqHZT4RZFvU62J/tUZoGY7KLsXNL4MVIh/QAwVC
 nBp/Qjpcx7Khm92kaR55Z2PcgLyd0N7lI/C7pE6YEk+7qVz0Suo=
 =zCOv
 -----END PGP SIGNATURE-----

Merge tag 'kvm-s390-next-6.14-2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

- some selftest fixes
- move some kvm-related functions from mm into kvm
- remove all usage of page->index and page->lru from kvm
- fixes and cleanups for vsie
2025-02-04 11:14:21 -05:00