Enable the block layer support for MTD devices.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
- It includes a series which adds DT bindings and PM domain driver for
PCU (Power Control Unit) block found on ZTE ZX2967 family SoC.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJYjW7hAAoJEFBXWFqHsHzOCN8H/jVJo7Rnx4zwL8sx+2pjuceN
ecTTu2l9U5Nh2Y1uRqDf914rquJteDNYoe0oWz71W7UxpJMl20X3zjfso7SWDqx8
uSEgad6V/qHkgQQnLL9S9WdFQEGhfjVYvnMoVjBQEb1jpwdIm+nr8PIZ+Fqhh8u0
3OLOjXk40PvzKcYwkxqeJQajP0pE6UFUOXQesolcCr+ilTvoqqQ9chPY4Jvsc7Qf
ffC+ueSUymAhIqof2kEfy3PS5NA/ltQjokDpKjvU2+e3uJtM3qwstzt1kPCgX/d7
azOuNNdif4hT2J26qIBG5H/wS/dFEvxnA0P4J/XUwkQ4FPRpa2Er1+F+03n5sPc=
=XwPV
-----END PGP SIGNATURE-----
Merge tag 'zte-pd-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers
ZTE PM domain driver support for 4.11:
- It includes a series which adds DT bindings and PM domain driver for
PCU (Power Control Unit) block found on ZTE ZX2967 family SoC.
* tag 'zte-pd-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: zte: pm_domains: Add support for zx296718
soc: zte: pm_domains: Prepare for supporting ARMv8 zx2967 family
soc: zte: Add header for PM domains specifiers
MAINTAINERS: add zx2967 SoC drivers to ARM ZTE architecture
dt-bindings: zte: add bindings document for zx2967 power domain controller
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable cpufreq support for zx296718 by using new operating-points-v2
bindings, so that it works with the generic cpufreq-dt driver.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJYjW1hAAoJEFBXWFqHsHzOkYUH/RNoyrOb3+KWfy0pczLBj98F
SmF966hsGNPPKNZ+NFhqWdd1/iT9UzdIax09858HQzvyWSL7LSZNwbkHJU/2McKy
zFo71IAnMNiNti6USiKVNX0HGx9ndnCChzJBUAcum46fJ7Kt0g8zjfBZfGjRq1cQ
b3b1sJXt5P9+ebjUhrGXAykkS4zwpTHCdRAwmtKQEhU8Q5ri2+pqMtwvrt8XDfxl
vFbckTpA0byd60TGvl/HecmafpYhXvOU7QGQaknzOnlH2o5dmwf0/i7Cw0sqyQn7
JeBopKi7N2S2hN7ZlUYcEQ87FRGdf2u5WbQtcTRiYrZwvUf508hNMxGclMKUHNg=
=EYrK
-----END PGP SIGNATURE-----
Merge tag 'zte-dt64-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64
ZTE arm64 device tree update for 4.11:
- Enable cpufreq support for zx296718 by using new operating-points-v2
bindings, so that it works with the generic cpufreq-dt driver.
* tag 'zte-dt64-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: zx: support cpu-freq for zx296718
Signed-off-by: Olof Johansson <olof@lixom.net>
- Select wireless extensions option for imx_v6_v7_defconfig, so that
wireless works out of box with userspace tools such as 'iwconfig'.
- Enable EXT4 filesystem support for vf610m4_defconfig.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJYjWf2AAoJEFBXWFqHsHzOSicH/Rg+X7Qat+pMxINB7+enJqlw
mIM5WTUwhO4txugFD84ybcBitC/+t/kS5ffEM7ckkDDn6p6bN0K9vcU137V/CkE2
cMHgnuawXs3qCu4D+h4X3MsdF/AWTOD20dv1W5QMhC9/kANP2emQ6ohB5Wee0Gmx
5Mi4UaD0QNYrFsukayWhQ45i0RbsNRdiyzAntIpY1Xz8JJGL/ufTk233wtfxihsV
8MQw/Ar1Q3Hz8+eIKj+9dqDKV5AUrXQ3GvrvTfwlXlLM+NNSN5UWfJsbzob9754P
h02zRhjtQfjFKTUVAJKQPTNPci8b+8InnKyLgqSNSAnb/2PXtJB0AlFXJfaZ/LM=
=VjCo
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig
i.MX defconfig updates for 4.11:
- Select wireless extensions option for imx_v6_v7_defconfig, so that
wireless works out of box with userspace tools such as 'iwconfig'.
- Enable EXT4 filesystem support for vf610m4_defconfig.
* tag 'imx-defconfig-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: vf610m4: defconfig: enable EXT4 filesystem
ARM: imx_v6_v7_defconfig: Select wireless extensions option
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add support for LS1012A SoC which is an ARMv8 SoC with single
Cortex-A53 core, and the corresponding board support: FRDM, QDS
and RDB.
- Enable TMU (Thermal Monitoring Unit) support for LS1046A SoC.
- Enable PCA9547 device for ls2080a-rdb board by removing 'disabled'
status setting.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJYjWZxAAoJEFBXWFqHsHzOvGQIAJpdglbg/r997PFL43gODNaU
RfF/userRtzsm3PZ9Uyf2EMg2Q66O92g9lqlr6+QNDSBuLl6iyyIomiCE3P9D/8A
IggNiTKYuEFqWQUCQL6VSoOK5Ha9sa4D23rrGoRGbfKeiiM8M/gn7gNjOAmbbZx6
VwVAAmkLObGmrkxq9IN++u7rIpTWLyOX+6wzQUYFfTD8OqGBrkpFpKOGTZXgzmeE
Q8EebPh/ti2lFjGw1lWECjI4kEXIz7TMnKFsS/fYf7o6s778JQ/uocUl2UtTon1E
aIIU72OMq6Mp/EoaMq3l9t1pgoEZMPVzyGiYPVypfEzkKTh26wb9POc6KiDO0JE=
=g8mg
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64
Freescale arm64 device tree updates for 4.11:
- Add support for LS1012A SoC which is an ARMv8 SoC with single
Cortex-A53 core, and the corresponding board support: FRDM, QDS
and RDB.
- Enable TMU (Thermal Monitoring Unit) support for LS1046A SoC.
- Enable PCA9547 device for ls2080a-rdb board by removing 'disabled'
status setting.
* tag 'imx-dt64-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: clockgen: Add compatible string for LS1012A
Documentation: DT: add LS1012A compatible for SCFG and DCFG
Documentation: DT: Add entry for FSL LS1012A RDB, FRDM, QDS boards
arm64: dts: ls1046a: Add TMU device tree support
arm64: dts: Add support for FSL's LS1012A SoC
arm64: dts: ls2080a-rdb: remove disable status of pca9547
Signed-off-by: Olof Johansson <olof@lixom.net>
- New board support: vf610-zii-dev-rev-c, imx6ul-opos6uldev,
imx6ul-isiot, imx6qdl-savageboard, imx6q-mccmon6.
- A patch from Alexandre to correct the mangled license text which
has been copied & pasted all over the i.MX device tree files.
- Update cpu nodes of some i.MX SoCs to make them consistent and match
ePAPR spec.
- Add OCOTP device for i.MX6UL SoC.
- Add security violation interrupt for i.MX25 DryIce.
- Enable USB OTG, WIFI and Bluetooth support for i.MX6SX Udoo Neo
board.
- Enable S/PDIF and 2nd display pipeline support for CompuLab board..
- Add SPI and LTC3676 PMIC support for Gateworks Ventana boards.
- A few random device addition for various boards: TVE DAC regulators
for imx53-qsb, EEPROM for vf610-zii-dev, eMMC and NAND support for
i.MX6UL Engicam boards.
- Cleanups on obsoleted or unused properties.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJYjWLQAAoJEFBXWFqHsHzOGt0H/2WCsuRi6WU7i7Wyk/S0Xq5t
HzA/9m2f7z1vb1tzFknbpcWYa9bdofI7Dz+6KW2vp4fxhMyJn8SQxWwQjVNya2ba
z8XLdEMlIuozBebPcH84ovNzqoBIOEFahGm5smm40s/o7XL8ua9tOEFaUc+jY0Pd
n/3TPmoyBTlbrgiCZfLXCVsczHtEVW5JoQmXT7aDsxT0BQpnwLbgXKVOxgDvsWXM
WtAKjpGvdiApD3znbFjYmRKak+2uilkV5B4jrL4mZf8dxCliykP4XA/LbiMLKAMN
voMpTtTK7UYp59GrwKbqfJ+pPU7b6ndKK59f7FWrTDNgtDGe+J4ExjWwsDnuLfI=
=HAbg
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
i.MX device tree updates for 4.11:
- New board support: vf610-zii-dev-rev-c, imx6ul-opos6uldev,
imx6ul-isiot, imx6qdl-savageboard, imx6q-mccmon6.
- A patch from Alexandre to correct the mangled license text which
has been copied & pasted all over the i.MX device tree files.
- Update cpu nodes of some i.MX SoCs to make them consistent and match
ePAPR spec.
- Add OCOTP device for i.MX6UL SoC.
- Add security violation interrupt for i.MX25 DryIce.
- Enable USB OTG, WIFI and Bluetooth support for i.MX6SX Udoo Neo
board.
- Enable S/PDIF and 2nd display pipeline support for CompuLab board..
- Add SPI and LTC3676 PMIC support for Gateworks Ventana boards.
- A few random device addition for various boards: TVE DAC regulators
for imx53-qsb, EEPROM for vf610-zii-dev, eMMC and NAND support for
i.MX6UL Engicam boards.
- Cleanups on obsoleted or unused properties.
* tag 'imx-dt-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (32 commits)
ARM: dts: udoo_neo: Add Bluetooth support
ARM: dts: udoo_neo: Add Wifi support
ARM: dts: udoo_neo: Add UDOO Neo USB OTG1 and OTG2 support
ARM: dts: imx6ul: Add Engicam Is.IoT MX6UL NAND initial support
ARM: dts: imx6ul: Add Engicam Is.IoT MX6UL eMMC initial support
ARM: dts: imx6qdl: Fix "ERROR: code indent should use tabs where possible"
ARM: dts: vf610-zii-dev: add EEPROM entry to Rev C
ARM: dts: add Armadeus Systems OPOS6UL and OPOS6ULDEV support
ARM: dts: imx6q-utilite-pro: enable 2nd display pipeline
ARM: dts: vf610-zii-dev: Add .dts file for rev. C
ARM: dts: vf610-zii-dev-rev-b: Remove leftover PWM pingroup
ARM: dts: imx6: Support Savageboard quad
ARM: dts: imx6: Support Savageboard dual
ARM: dts: imx6: Add Savageboard common file
ARM: dts: imx53-qsb: Provide the TVE DAC regulators
ARM: dts: imx6q: Add mccmon6 board support
Doc: devicetree: bindings: Add vendor prefix entry - lwn
ARM: dts: imx/vf: Correct license text
ARM: dts: imx25.dtsi: DryIce security violation interrupt
ARM: dts: imx: Add ocotp node for imx6ul
...
Signed-off-by: Olof Johansson <olof@lixom.net>
- Remove unused flexcan and esdhc device definitions for i.MX25.
- A series from Fabio to remove camera device initialization code from
i.MX platform support, since the corresponding media driver has been
deprecated and removed from kernel tree.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJYjVZ8AAoJEFBXWFqHsHzOiW8IAKucWgP/WbNyi4AOJf7fyXts
USevVUrv5PMpeekb/EoLilYXNZaaUSnmx/zsAGfG2tBd94FPrDEFcDJLmEmBVKwO
fYxFEBddVJkT+zsXgAkffaEI447tV9Hgaxb91vqc25LKqj85uxzeo3t4YZadHO22
xFIc/hE3GDTiu0L4P0cqAE9hJl7pZGiENta0KZO6g8nvYpFvPddtfQ/GpbKGOJW1
9h/iMP4CbnTgU9pQkm/IwGopejsvWHzlCVrOPJz5Fj7B7Mrf6xQigo5ZovPnPF+m
GYp5C4wZ9oQCsIeaBLEKubgzJA+xXwp1TpzPbGdDPp5rqfsGEKfJiPnzNJK/x68=
=t+pS
-----END PGP SIGNATURE-----
Merge tag 'imx-cleanup-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc
i.MX cleanup for 4.11:
- Remove unused flexcan and esdhc device definitions for i.MX25.
- A series from Fabio to remove camera device initialization code from
i.MX platform support, since the corresponding media driver has been
deprecated and removed from kernel tree.
* tag 'imx-cleanup-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: mach-mx27_3ds: Remove camera support
ARM: mach-pcm037: Remove camera support
ARM: mach-mx35_3ds: Remove camera support
ARM: mx31moboard-smartbot: Remove camera support
ARM: mx31moboard-marxbot: Remove camera support
ARM: mach-mx31_3ds: Remove camera support
ARM: imx: remove unused device definitions
Signed-off-by: Olof Johansson <olof@lixom.net>
- A couple of fixes on anatop regulator voltage and constraints
according to hardware datasheet.
- Correct FEC interrupt routing for i.MX6QP which has got the hardware
bug found on i.MX6Q fixed.
- Remove unit address from i.MX6 LDB device node to fix DTC warning.
- A fix on imx53-qsb board FEC pinmux config to remove the dependency
on firmware for setting up pins.
- A series from Sascha to fix LPSR pins for i.MX7 boards.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJYjVP+AAoJEFBXWFqHsHzOcvEIAKmxLYG5bmXkUNm+cJQ0oJde
MPh984lN1Xzx0PFlXJoC3mMC4W0RCibLjjSMS3s28ddzw0AKyAWHVkPDzUtuFQOT
s7iUjgXhfpwxeIt5DGZUXbzfZVXjRrVgWfYSMPnc2Q+PUAHQDhqTqylCTz5yF6qf
/XpN5uBaq/h++CJ+e06h9xSuIaCcEtGzLoUA+qXJBseBCLxlaR7zlt5bVL338oOt
P8LuKk8Xcmc6QstpC5HyH8XuHQ8h+Gj0tLKkFeEnLY5JFmRo6e1wOq9EPW+AHfBp
vgW5cI5cgdtn7/TuAbmCOoE052jd8oVK3LnKEfFXHxcBCDIDYz580CdbTFe06+g=
=tRE+
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-nc-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
i.MX non-critical device tree fixes for 4.11:
- A couple of fixes on anatop regulator voltage and constraints
according to hardware datasheet.
- Correct FEC interrupt routing for i.MX6QP which has got the hardware
bug found on i.MX6Q fixed.
- Remove unit address from i.MX6 LDB device node to fix DTC warning.
- A fix on imx53-qsb board FEC pinmux config to remove the dependency
on firmware for setting up pins.
- A series from Sascha to fix LPSR pins for i.MX7 boards.
* tag 'imx-fixes-nc-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx53-qsb-common: fix FEC pinmux config
ARM: imx6: remove unit address from LDB node
ARM: imx6qp: adapt DT to changed FEC interrupts
ARM: imx6: fix regulator constraints on anatop 1p1 and 2p5
ARM: imx6: fix min/max voltage of anatop 2p5 regulator
ARM: dts: imx7: Add "LPSR" to LPSR iomux pin names
ARM: dts: imx7d-cl-som: Fix OTG power pinctrl
ARM: dts: imx7d-sdb: Fix watchdog and pwm pinmux
ARM: dts: imx7s-warp: Fix watchdog pinmux
Signed-off-by: Olof Johansson <olof@lixom.net>
- more EBI fixes
-----BEGIN PGP SIGNATURE-----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=udxv
-----END PGP SIGNATURE-----
Merge tag 'at91-ab-4.11-drivers2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/drivers
Drivers for 4.11 #2:
- more EBI fixes
* tag 'at91-ab-4.11-drivers2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
memory: atmel-ebi: Enable the SMC clock if specified
memory: atmel-ebi: Properly handle multiple reference to the same CS
memory: atmel-ebi: Fix the test to enable generic SMC logic
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add a new Armada 8K based board: MACCHIATOBin
- Enable AHCI on the Armada 7K/8K SoCs
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWIt9MyMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71Zw/AJ9NEi6v2zy2
F16VJxKCgnhcJd++zwCfXA4/Z8eBtxXwsIPNLPMCTc9FtC0=
=JDKj
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt64-4.11-2' of git://git.infradead.org/linux-mvebu into next/dt64
mvebu dt64 for 4.11 (part 2)
- Add a new Armada 8K based board: MACCHIATOBin
- Enable AHCI on the Armada 7K/8K SoCs
* tag 'mvebu-dt64-4.11-2' of git://git.infradead.org/linux-mvebu:
arm64: dts: marvell: add generic-ahci compatibles for CP110 ahci
arm64: dts: marvell: Add DT for MACCHIATOBin board
Signed-off-by: Olof Johansson <olof@lixom.net>
Switch device tree files to the new DSA binding
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWIt8ZyMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71fx4AJ4mibAO0PUJ
Hbts4+PNC5f8PMYHlQCeIDfqtqLKlfJMVH3YFasSLYmb0lo=
=PRxv
-----END PGP SIGNATURE-----
Merge tag 'mvebu-dt-4.11-2' of git://git.infradead.org/linux-mvebu into next/dt
mvebu dt for 4.11 (part 2)
Switch device tree files to the new DSA binding
* tag 'mvebu-dt-4.11-2' of git://git.infradead.org/linux-mvebu:
ARM: dts: kirkwood-rd88f6281: Utilize new DSA binding
ARM: dts: kirkwood-mv88f6281gtw-ge: Utilize new DSA binding
ARM: dts: kirkwood-linksys-viper: Utilize new DSA binding
ARM: dts: kirkwood-dir665: Utilize new DSA binding
ARM: dts: armada-xp-linksys-mamba: Utilize new DSA binding
ARM: dts: armada-388-clearfog: Utilize new DSA binding
ARM: dts: armada-385-linksys: Utilize new DSA binding
ARM: dts: armada-370-rd: Utilize new DSA binding
Signed-off-by: Olof Johansson <olof@lixom.net>
Cleanup up on dove pmu and mv78x00 pci
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWIt76SMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71ei+AKCfHdyZYwW1
uRXvVqdkSgOYQ8hAiwCfd2NeIfkr/7rEufrswNvqcmVc078=
=FdKA
-----END PGP SIGNATURE-----
Merge tag 'mvebu-soc-4.11-1' of git://git.infradead.org/linux-mvebu into next/soc
mvebu soc for 4.11 (part 1)
Cleanup up on dove pmu and mv78x00 pci
* tag 'mvebu-soc-4.11-1' of git://git.infradead.org/linux-mvebu:
soc: dove: constify reset_control_ops structures
ARM: mv78xx0: fix possible PCI buffer overflow
Signed-off-by: Olof Johansson <olof@lixom.net>
Since v4.10-rc1, xhci is complaining in loop with :
[ 801.953836] usb usb6-port1: Cannot enable. Maybe the USB cable is bad?
[ 801.960455] xhci-hcd xhci-hcd.0.auto: Cannot set link state.
[ 801.966611] usb usb6-port1: cannot disable (err = -32)
set property "snps,dis_u3_susphy_quirk" in DT fix it.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=+Frf
-----END PGP SIGNATURE-----
Merge tag 'sti-dt-for-v4.10-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into fixes
STi DT fix:
Since v4.10-rc1, xhci is complaining in loop with :
[ 801.953836] usb usb6-port1: Cannot enable. Maybe the USB cable is bad?
[ 801.960455] xhci-hcd xhci-hcd.0.auto: Cannot set link state.
[ 801.966611] usb usb6-port1: cannot disable (err = -32)
set property "snps,dis_u3_susphy_quirk" in DT fix it.
* tag 'sti-dt-for-v4.10-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti:
ARM: dts: STiH407-family: set snps,dis_u3_susphy_quirk
Signed-off-by: Olof Johansson <olof@lixom.net>
This contains three patches that reintroduce symbolic identifiers for
clocks, resets and mailboxes. These had been converted to literals in
the v4.10 release to avoid complicated dependencies between branches.
-----BEGIN PGP SIGNATURE-----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=eeee
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.11-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt64
arm64: tegra: Device tree changes for v4.11-rc1
This contains three patches that reintroduce symbolic identifiers for
clocks, resets and mailboxes. These had been converted to literals in
the v4.10 release to avoid complicated dependencies between branches.
* tag 'tegra-for-4.11-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Use symbolic reset identifiers
arm64: tegra: Use symbolic clock identifiers
arm64: tegra: Use symbolic HSP identifiers
Signed-off-by: Olof Johansson <olof@lixom.net>
This contains a set of patches that add hardware compatibility for newer
revisions of the Toradex Apalis TK1. Also included is a fix to the PAZ00
that stabilizes panel initialization on boot as well as a patch to add
card detection for the µSD card slot on TrimSlice.
To round things off there are a couple of fixes and changes to the Nyan
device tree files to fix the battery charger, add compatibility with new
revisions of Nyan Blaze and Nyan Big, as well as properly support the
TPM.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAliLDnETHHRyZWRpbmdA
bnZpZGlhLmNvbQAKCRDdI6zXfz6zoQ8VEACrXqha5c4/lbDW1MIzD90McHHAL3U1
UtyvDp8lyOYXWMhwgraJvfHM0VVyyGsjzxn+DflKFo4LF9iro2nOOSJqeMxVIxhC
EC7kbJ1jjoc81sYTMy7oPtgMDy3eYnKzsf3Ua7mo7yFR+zQ4S1HovEF4xqOSyGfC
rPwrwvgl+KuVj4KkEY71DAqMXmuSEBRbgW03IPa1yEJhQ5KCH7gE8ox1HZBtorrl
ITf8up/YUvA/HzBhZTPjn8D65QJIH2g7ehOAlMvIfM8qshCH+mPfBNR2pVKzFP7B
r51RRpUlSriZVMXglq6cQ7zyEoGTMph3h33DLnPbYTcDGJz7ETVp/TS8sGG6YNHg
KsVmmgbS+sQGEKz1/Eq9LRv4xnQm0x2oOTRO96oD+WAs9r8csJlnSbWfQOPRgXgz
fL/X7SW229eXrejg4faxH2jVX9qWwnWua0TkUFMArmall/iFjqhFfc/0GIdVFpmU
wXXuKTtHyAHQBwgXUVe3Y3SSIHT5qS9yRMHJyaTt/c25gdgCMDtZVTyNbY05Lcv6
f3RLdJEEvm0xIPneRpF7FDZIohvlGnTidHgSp8CaJkk1KNett/DiK7N5NN6wjOVF
EZZm2tPY/nXL3pyspt0ZsZhVsp97p50rkkAKBHu+u+h2K1f39NX3Qm6886a/J/h4
ijqExw48RGedig==
=QqnB
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.11-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
ARM: tegra: Device tree changes for v4.11-rc1
This contains a set of patches that add hardware compatibility for newer
revisions of the Toradex Apalis TK1. Also included is a fix to the PAZ00
that stabilizes panel initialization on boot as well as a patch to add
card detection for the µSD card slot on TrimSlice.
To round things off there are a couple of fixes and changes to the Nyan
device tree files to fix the battery charger, add compatibility with new
revisions of Nyan Blaze and Nyan Big, as well as properly support the
TPM.
* tag 'tegra-for-4.11-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: nyan-blaze: Proper pinmux for TPM I2C
ARM: tegra: nyan-big: Proper pinmux for TPM I2C
ARM: tegra: nyan-blaze: Include compatible revisions for proper detection
ARM: tegra: nyan-big: Include compatible revisions for proper detection
ARM: tegra: nyan: Use external control for bq24735 charger
ARM: tegra: nyan: Use proper IRQ type definitions
ARM: dts: tegra: Fix missing card detection in Trimslice µSD card slot
ARM: tegra: paz00: Mark panel regulator as enabled on boot
ARM: tegra: apalis-tk1: Update compatibility comment
ARM: tegra: apalis-tk1: Fix SD card detect on v1.1 HW
ARM: tegra: apalis-tk1: Adjust pin muxing for v1.1 HW
ARM: tegra: apalis-tk1: Optional DisplayPort hot-plug detect
ARM: tegra: apalis-tk1: Pull-up temperature alert
Signed-off-by: Olof Johansson <olof@lixom.net>
This contains a single cleanup patch for the placement of the __initdata
annotation, as suggested by checkpatch.
-----BEGIN PGP SIGNATURE-----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=NF/K
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.11-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc
ARM: tegra: Core SoC changes for v4.11-rc1
This contains a single cleanup patch for the placement of the __initdata
annotation, as suggested by checkpatch.
* tag 'tegra-for-4.11-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: paz00: Fix __initdata placement
Signed-off-by: Olof Johansson <olof@lixom.net>
This contains a single commit that plugs a potential device node leak in
error handling code.
-----BEGIN PGP SIGNATURE-----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=vWHP
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.11-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers
memory: tegra: Changes for v4.11-rc1
This contains a single commit that plugs a potential device node leak in
error handling code.
* tag 'tegra-for-4.11-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
memory: tegra: Add a missing 'of_node_put()' call
Signed-off-by: Olof Johansson <olof@lixom.net>
r8a779[56] SoCs:
* Mark EthernetAVB device node disabled in DT for r8a779[56] SoCs
- They are enabled as appropriate in board DT files
* Link ARM GIC to clock and clock domain on r8a779[56] SoCs
* Add thermal support
r8a7795 SoC:
* Tidyup audma definition order on r8a7795 SoC
* Add missing power-domains property for SATA
r8a7795/h3ulcb board:
* Add MIX/CTU support as per support present in DT for r8a7796
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=KG8o
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm64-dt2-for-v4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64
Second Round of Renesas ARM64 Based SoC DT Updates for v4.11
r8a779[56] SoCs:
* Mark EthernetAVB device node disabled in DT for r8a779[56] SoCs
- They are enabled as appropriate in board DT files
* Link ARM GIC to clock and clock domain on r8a779[56] SoCs
* Add thermal support
r8a7795 SoC:
* Tidyup audma definition order on r8a7795 SoC
* Add missing power-domains property for SATA
r8a7795/h3ulcb board:
* Add MIX/CTU support as per support present in DT for r8a7796
* tag 'renesas-arm64-dt2-for-v4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: r8a7796: Mark EthernetAVB device node disabled
arm64: dts: r8a7795: Mark EthernetAVB device node disabled
arm64: dts: r8a7795: tidyup audma definition order
arm64: dts: r8a7796: Link ARM GIC to clock and clock domain
arm64: dts: r8a7795: Link ARM GIC to clock and clock domain
arm64: dts: r8a7796: Add R-Car Gen3 thermal support
arm64: dts: r8a7795: Add R-Car Gen3 thermal support
arm64: dts: r8a7795: Add missing power-domains property for sata
arm64: dts: h3ulcb: follow sound CTU/MIX supports
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable the DMA on sama5d2 and sama5d4 xplained to fix an issue seen by
kernelci
-----BEGIN PGP SIGNATURE-----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=MsBR
-----END PGP SIGNATURE-----
Merge tag 'at91-ab-4.11-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt
DT for 4.11 #2:
- Enable the DMA on sama5d2 and sama5d4 xplained to fix an issue seen by
kernelci
* tag 'at91-ab-4.11-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
ARM: dts: at91: Enable DMA on sama5d2_xplained console
ARM: dts: at91: Enable DMA on sama5d4_xplained console
Signed-off-by: Olof Johansson <olof@lixom.net>
* Add more register documentation to R-Car Gen2 PM
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJYicrUAAoJENfPZGlqN0++hX0P/RfsvYchYCwmgwNjUsC45dLJ
UCR+jRFEciq4XzOpF4yExqR8+16/Ne7JFU5ayKd6cv9x/NlDbtcWDRl2eJ2uw1QF
o2gESzrO67rcrSBSqGp/Fk9lqp42HrrAXlHew9NpmPCLGzlWusgn40ET9IVF9KGa
HgWBIeJaB3R0DeViYeUcCiizYgTMORHsi+JPxvHnP1je7+jjfhK2oOLs++nzpISl
0BJgKM5vtW7UCRkMbqYCXNmb+Ej9ReSX+EvfGKlw/EyotGY7uxku0FsQDZFSTsf6
un6wgoGF+41U85KTN6uEEaM+VK42z1+/eAGGgn37efHC+GrpQP/1LXTGJBhNZszB
JwWJk7y+a5EjAp5Hfdc00x2G+0vj7ohk++7ffFA+tz249PX7Wbd7JeNzxsQRFzri
8VPpiFtGImVSy6Cq/fR05CjAns20JW8BGM3U8gY1FQare/ZPaExHMisX71lgv/mi
27SJ0M3THOGu2RSkbtzYmOfUUrC1DCmTSUtD6s4ZZYu/79n5db1+6mdNRB+P89UR
pDagZqNK6v0YgBaCO7fkLe6jkYhPCKFGjOSxVuOtnDkLAC8kIazQBDE5mNlr/8Yo
gVhdskUhBQHmwFU1iuTTnfiiotc2Ef8oiY18JyGTCE5x6AB0sMytN91UlYBkLs9H
4U4iuWx5jYhkQahD6jTM
=WcAl
-----END PGP SIGNATURE-----
Merge tag 'renesas-soc2-for-v4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Second Round of Renesas ARM Based SoC Updates for v4.11
* Add more register documentation to R-Car Gen2 PM
* tag 'renesas-soc2-for-v4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: rcar-gen2: Add more register documentation
Signed-off-by: Olof Johansson <olof@lixom.net>
Enhancements:
* Add power-domains to mmcif on r7s72100 SoC
* Add OSTM to rskrza1/r7s72100
* Link ARM GIC to clock and clock domain on r8a774[35] SoCs
Clean-up:
* Correct SATA device status on r8a7779/marzen
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=5/D6
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt2-for-v4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Second Round of Renesas ARM Based SoC DT Updates for v4.11
Enhancements:
- Add power-domains to mmcif on r7s72100 SoC
- Add OSTM to rskrza1/r7s72100
- Link ARM GIC to clock and clock domain on r8a774[35] SoCs
Clean-up:
- Correct SATA device status on r8a7779/marzen
* tag 'renesas-dt2-for-v4.11' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: dts: r7s72100: add power-domains to mmcif
ARM: dts: rskrza1: add ostm DT support
ARM: dts: r7s72100: add ostm to device tree
ARM: dts: r7s72100: add ostm clock to device tree
ARM: dts: r8a7745: Link ARM GIC to clock and clock domain
ARM: dts: r8a7743: Link ARM GIC to clock and clock domain
ARM: dts: r8a7779, marzen: Fix sata device status
Signed-off-by: Olof Johansson <olof@lixom.net>
When setting a 2MB pte, radix__map_kernel_page() is using the address
ptep = (pte_t *)pudp;
Fix this conversion to use pmdp instead. Use pmdp_ptep() to do this
instead of casting the pointer.
Fixes: 2bfd65e45e ("powerpc/mm/radix: Add radix callbacks for early init routines")
Cc: stable@vger.kernel.org # v4.7+
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Reza Arbab <arbab@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Since we moved the cdb parts and define out of the block proper,
we need to include scsi/scsi_request.h for the nvme scsi layer.
Fixes: 82ed4db499 ("block: split scsi_request out of struct request")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jens Axboe <axboe@fb.com>
This cycle is a minor fixes one, covering :
- build fixes from Arnd, mainly include related
- transfer of maintainance of Motorala phone to Robert
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Z3AX
-----END PGP SIGNATURE-----
Merge tag 'pxa-for-4.11' of https://github.com/rjarzmik/linux into next/soc
This is the pxa changes for v4.11 cycle.
This cycle is a minor fixes one, covering :
- build fixes from Arnd, mainly include related
- transfer of maintainance of Motorala phone to Robert
* tag 'pxa-for-4.11' of https://github.com/rjarzmik/linux:
MAINTAINERS: transfer maintainership for the EZX platform
ARM: pxa: include linux/leds.h
ARM: pxa: ezx: fix a910 camera data
Signed-off-by: Olof Johansson <olof@lixom.net>
Enable the Cadence SD/SDIO/eMMC controller. This is used on
Socionext UniPhier SoC family.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
- Drop the declaration of the unimplemented hip01_cpu_die
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJYiNOBAAoJEAvIV27ZiWZcmkIP/jiTcu/KpJDKbhsf04QKvlNr
lHxcH+PuBpvp33Emw2b17dyKqRq5+74LtxShxVIW3KLBipi1w9dsHhlFc1QfnFNb
lxZNvhIOWJshHsnu9Xn23Vbari1cxcpoEZe1R+6ij20UXdg282C7Zj3Hg8oHa5oB
eCGgoSxwnEqh55MmUOTSh+7GG1eSK/MExjZAI/nT8NUu2JIhLopAXCMJVZu3tUUz
BEOrz+76WC3KWkG7aFdBu10/7qRT++Wh2jirguxCEXo9SxaUs1i7G1DGzhy8N9oh
Vs2EKNdYTeKu9IMJAx2RFEcxEusc+oAfTLQBQCSQFaKYKp+K+ZZ3pKF6E7LT1AyL
Sz/xQETtWNjETgE5YVXwfHUlZOB7k9/2q/SoL9gqbQ+302Que1U6a+i747ZLmYH9
/N7HS1WLMLIGGvcp7X/iMwBqZAnVY+vi7KNiqGzRd2YYRnJ/L44fTbEIB/Ve5tvT
vj81yKTLx228VJM9IB0F2Sz6KXsJeW2TcNk2sF88TfGx80FTmxFfdK1lHNQXQWcu
4aRG2o2np3PFXCn1pGW1KoVvvhhnzFRcXQSXlRQTOcc/SBOK9E1hOCvEf3eG0cdj
TSRLbvlg2Gs7BdX8O4axNoN9nbXD1MvF6yuAgbxdavgJGUx72Eq7J7ebzUXNFwTh
nxhqaOtpmPyigm8aS2nb
=XY+A
-----END PGP SIGNATURE-----
Merge tag 'hisi-armv7-soc-for-4.11' of git://github.com/hisilicon/linux-hisi into next/soc
ARM: mach-hisi: Hisilicon SoC updates for 4.11
- Drop the declaration of the unimplemented hip01_cpu_die
* tag 'hisi-armv7-soc-for-4.11' of git://github.com/hisilicon/linux-hisi:
arm: hisi: drop extern hip01_cpu_die
Signed-off-by: Olof Johansson <olof@lixom.net>
- Enable ARM_SMMU_V3 in the arm64 defconfig
- Enable NUMA and NUMA_BALANCING in the arm64 defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=7Xif
-----END PGP SIGNATURE-----
Merge tag 'hisi-defconfig-for-4.11' of git://github.com/hisilicon/linux-hisi into next/defconfig
ARM64: hisilicon: defconfig updates for 4.11
- Enable ARM_SMMU_V3 in the arm64 defconfig
- Enable NUMA and NUMA_BALANCING in the arm64 defconfig
* tag 'hisi-defconfig-for-4.11' of git://github.com/hisilicon/linux-hisi:
arm64: defconfig: Enable NUMA and NUMA_BALANCING
arm64: defconfig: enable SMMUv3 config
Signed-off-by: Olof Johansson <olof@lixom.net>
- Add binding for Hi3660 SoC and HiKey960 Board
- Add binding for ARM Cortex-A73
- Add dts files for HiKey960 development board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=zJLi
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-dt-for-4.11' of git://github.com/hisilicon/linux-hisi into next/dt64
ARM64: DT: Hisilicon SoC DT updates for 4.11
- Add binding for Hi3660 SoC and HiKey960 Board
- Add binding for ARM Cortex-A73
- Add dts files for HiKey960 development board
* tag 'hisi-arm64-dt-for-4.11' of git://github.com/hisilicon/linux-hisi:
arm64: dts: Add dts files for Hisilicon Hi3660 SoC
dt-bindings: Add a support cpu type for cortex-a73
document: dt: add binding for Hi3660 SoC
Signed-off-by: Olof Johansson <olof@lixom.net>
- set mm_sel clock to 400 MHz to support 4K HDMI
- adjust power efficiency between the little and big cores
- add a node for thermal calibration via e-fuse data
-----BEGIN PGP SIGNATURE-----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=hboI
-----END PGP SIGNATURE-----
Merge tag 'v4.10-next-dts' of https://github.com/mbgg/linux-mediatek into next/dt64
For mt8173:
- set mm_sel clock to 400 MHz to support 4K HDMI
- adjust power efficiency between the little and big cores
- add a node for thermal calibration via e-fuse data
* tag 'v4.10-next-dts' of https://github.com/mbgg/linux-mediatek:
arm64: dts: mt8173: add node for thermal calibration
arm64: dts: mt8173: Fix cpu_thermal cooling-maps contributions
arm64: dts: mt8173: add mmsel clocks for 4K support
Signed-off-by: Olof Johansson <olof@lixom.net>
- Switch to use LIS3LV02DL IIO driver instead of the
LIS3LC02D misc driver
- Set CONFIG_SERIAL_8250_RUNTIME_UARTS=6 to avoid runtime
warnings on omap5 and dra7
- Enable ksz9021 phy and m41t80 rtc as they are used at
least on phyCORE-AM335x
-----BEGIN PGP SIGNATURE-----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=Vv0t
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.11/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig
Few omap2plus_defconfig changes for v4.11 merge window:
- Switch to use LIS3LV02DL IIO driver instead of the
LIS3LC02D misc driver
- Set CONFIG_SERIAL_8250_RUNTIME_UARTS=6 to avoid runtime
warnings on omap5 and dra7
- Enable ksz9021 phy and m41t80 rtc as they are used at
least on phyCORE-AM335x
* tag 'omap-for-v4.11/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: omap2plus_defconfig: Enable support for RTC M41T80
ARM: omap2plus_defconfig: Enable support for micrell phys
ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6
ARM: defconfig: omap2plus: switch LIS3LV02DL driver
Signed-off-by: Olof Johansson <olof@lixom.net>
changes add earlycon stdout-path propety for the SoCs so far
tested with it. The other changes are addition of BeagleBone
green and making WLAN work on BeagleBone black wireless and
green wireless. The rest of the changes are the usual enabling
features on various devices:
- Enable devices on am335x-sl50
- Changes to dra7-evm boards to enable enable irqs for dp83867
eth phys, add pinmux configuration for mmc, remov erratum
i869 pinmux configurations, disable NAND support because of
pin conflict, add pcf8575 used for lcd
- Remove NAND partition table for omap3-igep
- Configure USB Ethernet MAC from device tree for beagleboard
xm, pandaboard, omap5-uevm and igepv5
- Configure am335x-chilisom to wake from RTC-only state
- Update Nanobone for external FRAM chip
- Clean up n900 dts
- Update am335x-phycore and am335x-wega for various devices
- Changes for am57xx-beagle-x15 to implement rgmii2 errata
-----BEGIN PGP SIGNATURE-----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=URbm
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.11/dt-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Device tree changes for omaps for v4.11 merge window. These
changes add earlycon stdout-path propety for the SoCs so far
tested with it. The other changes are addition of BeagleBone
green and making WLAN work on BeagleBone black wireless and
green wireless. The rest of the changes are the usual enabling
features on various devices:
- Enable devices on am335x-sl50
- Changes to dra7-evm boards to enable enable irqs for dp83867
eth phys, add pinmux configuration for mmc, remov erratum
i869 pinmux configurations, disable NAND support because of
pin conflict, add pcf8575 used for lcd
- Remove NAND partition table for omap3-igep
- Configure USB Ethernet MAC from device tree for beagleboard
xm, pandaboard, omap5-uevm and igepv5
- Configure am335x-chilisom to wake from RTC-only state
- Update Nanobone for external FRAM chip
- Clean up n900 dts
- Update am335x-phycore and am335x-wega for various devices
- Changes for am57xx-beagle-x15 to implement rgmii2 errata
* tag 'omap-for-v4.11/dt-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (35 commits)
ARM: dts: dra72/1-evm: add pcf8575 used for lcd
ARM: dts: dra7xx: Add stdout-path property
ARM: dts: am57xx: Add stdout-path property
ARM: dts: am43xx: Add stdout-path property
ARM: dts: am33xx: Add stdout-path property
ARM: dts: am335x-sl50: Enable the Ambient Light Sensor.
ARM: dts: am335x-sl50: Enable the MCP23017 GPIO Expander.
ARM: dts: am335x-sl50: Enable BQ32000 Real Time Clock.
ARM: dts: am335x-sl50: Enable SPI0 interface and Flash Memory.
ARM: dts: am335x-sl50: Enable UART1.
ARM: dts: am335x-sl50: Remove I2C1 node.
ARM: dts: omap3-igep: Remove NAND partition table
ARM: dts: am57xx-beagle-x15: implement errata "Ethernet RGMII2 Limited to 10/100 Mbps"
ARM: dts: am335x-phycore-som: Remove partition tables
ARM: dts: dra72-evm-revc: enable irqs for dp83867 eth phys
ARM: dts: Configure BeagleBone peripheral USB VBUS irq
ARM: dts: omap5-igep0050: Allow bootloader to configure USB Ethernet MAC
ARM: dts: omap5-uevm: Allow bootloader to configure USB Ethernet MAC
ARM: dts: pandaboard: Allow bootloader to configure USB Ethernet MAC
ARM: omap3: beagleboard-xm: dt: Add ethernet to the device tree
...
Signed-off-by: Olof Johansson <olof@lixom.net>
We don't currently have anything else for drivers/soc to
merge, but I'd expect that to change as soon as we can start
moving PM code into drivers with the recently posted SRAM
changes. Anyways, sent as a separate pull request to make
it easy to group the ARM SoC pull requests.
-----BEGIN PGP SIGNATURE-----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=2tPW
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.11/drivers-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers
Just a single wkup_m3_ipc clean-up for v4.11 merge window.
We don't currently have anything else for drivers/soc to
merge, but I'd expect that to change as soon as we can start
moving PM code into drivers with the recently posted SRAM
changes. Anyways, sent as a separate pull request to make
it easy to group the ARM SoC pull requests.
* tag 'omap-for-v4.11/drivers-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
soc: ti: wkup_m3_ipc: Drop wait from wkup_m3_rproc_boot_thread
Signed-off-by: Olof Johansson <olof@lixom.net>
for keeping the interconnect target module active for uart if
earlycon is specified. And we're adding Aaro Koskinen as a
co-maintainer for omap1 to make sure things stay working for
omap1. The other changes are mostly clean-up of old legacy code:
- Remove unused omap_display_init()
- Make omapdss_find_dss_of_node() function static
- Add support for earlycon
- Tidy up omap1 usb logging output with pr_cont
- Make omap_otg_init() static
- Delete redundant CPU class checks for omap1
- Remove unused mpurate cmdline option that has not done
anything for past 1.5 years at least
-----BEGIN PGP SIGNATURE-----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=GiAL
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.11/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
SoC changes for omaps for v4.11 merge window. This adds support
for keeping the interconnect target module active for uart if
earlycon is specified. And we're adding Aaro Koskinen as a
co-maintainer for omap1 to make sure things stay working for
omap1. The other changes are mostly clean-up of old legacy code:
- Remove unused omap_display_init()
- Make omapdss_find_dss_of_node() function static
- Add support for earlycon
- Tidy up omap1 usb logging output with pr_cont
- Make omap_otg_init() static
- Delete redundant CPU class checks for omap1
- Remove unused mpurate cmdline option that has not done
anything for past 1.5 years at least
* tag 'omap-for-v4.11/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP: clock: Remove unused mpurate cmdline option
ARM: OMAP2+: omap_hwmod: Add support for earlycon
MAINTAINERS: Add Aaro Koskinen as TI omap1 SoC co-maintainer
ARM: OMAP1: USB: delete redundant CPU class checks
ARM: OMAP1: USB: make omap_otg_init() static
ARM: OMAP1: USB: tidy up logging output
ARM: OMAP2+: Make the omapdss_find_dss_of_node() function static
ARM: OMAP2+: Remove unused omap_display_init() function
Signed-off-by: Olof Johansson <olof@lixom.net>
fixes for things that have never worked or have been broken for
a long time and nobody noticed:
- Fix omap3 off mode pull defines
- Allow multiple pdata quirks instead of just one
- Fix am335x and dm814x scm syscon to probe children too
- Fix compatible for ti81xx to allow use with 8250_omap as well
- Fix 8250_omap on omap5 by adding HWMOD_SWSUP_SIDLE_ACT flag
- Fix SoC detection for omap36/37 SoCs
-----BEGIN PGP SIGNATURE-----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=SNQE
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.11/fixes-not-urgent-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/fixes-non-critical
Non-urgent fixes for omaps for v4.11 merge window. These all are
fixes for things that have never worked or have been broken for
a long time and nobody noticed:
- Fix omap3 off mode pull defines
- Allow multiple pdata quirks instead of just one
- Fix am335x and dm814x scm syscon to probe children too
- Fix compatible for ti81xx to allow use with 8250_omap as well
- Fix 8250_omap on omap5 by adding HWMOD_SWSUP_SIDLE_ACT flag
- Fix SoC detection for omap36/37 SoCs
* tag 'omap-for-v4.11/fixes-not-urgent-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP3: Fix SoC detection of OMAP36/37 Family
ARM: OMAP5: Add HWMOD_SWSUP_SIDLE_ACT flag for UART
ARM: dts: Fix compatible for ti81xx uarts for 8250
ARM: dts: Fix am335x and dm814x scm syscon to probe children
ARM: OMAP2+: Fix init for multiple quirks for the same SoC
ARM: dts: Fix omap3 off mode pull defines
Signed-off-by: Olof Johansson <olof@lixom.net>
Import a minimal defconfig for tango4 boards.
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
* Coding style and typo fix
* Make PLL0 rate setting API for DA850
less confusing to use.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=rf0t
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.11/fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/fixes-non-critical
Non-critical DaVinci fixes for v4.11
* Coding style and typo fix
* Make PLL0 rate setting API for DA850
less confusing to use.
* tag 'davinci-for-v4.11/fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
bus: da850-mstpri: fix my e-mail address
ARM: davinci: da850: fix da850_set_pll0rate()
ARM: davinci: da850: coding style fix
Signed-off-by: Olof Johansson <olof@lixom.net>
This patch adds devm_alloc_etherdev_mqs function and devm_alloc_etherdev
macro. These can be used for simpler netdev allocation without having to
care about calling free_netdev.
Thanks to this change drivers, their error paths and removal paths may
get simpler by a bit.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
- fix double call of dev_queue_xmit(), caused by the recent introduction
of net_xmit_eval(), by Sven Eckelmann
- Fix includes for IS_ERR/ERR_PTR, by Sven Eckelmann
-----BEGIN PGP SIGNATURE-----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=iLbv
-----END PGP SIGNATURE-----
Merge tag 'batadv-next-for-davem-20170128' of git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
Here are two fixes for batman-adv for net-next:
- fix double call of dev_queue_xmit(), caused by the recent introduction
of net_xmit_eval(), by Sven Eckelmann
- Fix includes for IS_ERR/ERR_PTR, by Sven Eckelmann
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently the retransmission stats are not incremented if the
retransmit fails locally. But we always increment the other packet
counters that track total packet/bytes sent. Awkwardly while we
don't count these failed retransmits in RETRANSSEGS, we do count
them in FAILEDRETRANS.
If the qdisc is dropping many packets this could under-estimate
TCP retransmission rate substantially from both SNMP or per-socket
TCP_INFO stats. This patch changes this by always incrementing
retransmission stats on retransmission attempts and failures.
Another motivation is to properly track retransmists in
SCM_TIMESTAMPING_OPT_STATS. Since SCM_TSTAMP_SCHED collection is
triggered in tcp_transmit_skb(), If tp->total_retrans is incremented
after the function, we'll always mis-count by the amount of the
latest retransmission.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add two stats in SCM_TIMESTAMPING_OPT_STATS:
TCP_NLA_DATA_SEGS_OUT: total data packets sent including retransmission
TCP_NLA_TOTAL_RETRANS: total data packets retransmitted
The names are picked to be consistent with corresponding fields in
TCP_INFO. This allows applications that are using the timestamping
API to measure latency stats to also retrive retransmission rate
of application write.
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* Fix issues with SCM compile testing
* Add SCM set remote state API
* Mask APQ8064 SCM clock dependency issue
* Add Qualcomm DMA folder to MAINTAINERS
* Fix EBI2 dependencies
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=E4FV
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers
Qualcomm ARM Based Driver Updates for v4.11
* Fix issues with SCM compile testing
* Add SCM set remote state API
* Mask APQ8064 SCM clock dependency issue
* Add Qualcomm DMA folder to MAINTAINERS
* Fix EBI2 dependencies
* tag 'qcom-drivers-for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
firmware: qcom_scm: Add set remote state API
MAINTAINERS: Update the files to include the Qualcomm DMA folder
bus: qcom_ebi2: default y if ARCH_QCOM
firmware: qcom: scm: Mask APQ8064 core clk dependency
firmware: qcom: scm: Add empty functions to help compile testing
Signed-off-by: Olof Johansson <olof@lixom.net>
Timur Tabi says:
====================
net: qcom/emac:
Although not related, these patches affect the same files, so they should
be applied in order.
The first patch cleans up logging of when the the phy driver is attached.
The second patch always configures the SGMII to use autonegotiation mode.
The third patch removes a redundant call to emac_mac_start().
The fourth patch removes some extraneous non-functioning WOL code.
The fifth patch adds an error handler for the SGMII block.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The SGMII (internal PHY) can report decode errors via an interrupt. It
can also report autonegotiation status changes, but we don't need to track
those. The SGMII can recover automatically from most decode errors, so
we only reset the interface if we get multiple consecutive errors.
It's possible for bogus decode errors to be reported while the link is
being brought up. The interrupt is registered when the interface is
opened, and it's enabled after the link is up.
Signed-off-by: Timur Tabi <timur@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
