SATA Host 0 clock is (as correctly documented) id 15/sata0.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Rob Herring <robh@kernel.org>
The generic IOMMU binding says that the meaning of an 'IOMMU specifier'
is defined by the binding of a specific SMMU. The ARM SMMU binding
never explicitly uses the term 'specifier' at all. Update implicit
references to use the explicit term.
In the iommu-map binding change references to iommu-specifier to
"IOMMU specifier" so we are 100% consistent everywhere with terminology
and capitalization.
Signed-off-by: Stuart Yoder <stuart.yoder@nxp.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
OMAP related files are actually named ehci-omap.txt and ohci-omap3.txt.
Also add full path to ohci-omap3.txt.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
On PowerPC machines some PCI slots might not have level triggered
interrupts capability (also know as level signaled interrupts),
leading of_irq_parse_pci() to complain by presenting error messages
on the kernel log - in this case, the properties "interrupt-map" and
"interrupt-map-mask" are not present on device's node in the device
tree.
This patch introduces a different message for this specific case,
and also reduces its level from error to warning. Besides, we warn
(once) that possibly some PCI slots on the system have no level
triggered interrupts available.
We changed some error return codes too on function of_irq_parse_raw()
in order other failure's cases can be presented in a more precise way.
Before this patch, when an adapter was plugged in a slot without level
interrupts capabilitiy on PowerPC, we saw a generic error message
like this:
[54.239] pci 002d:70:00.0: of_irq_parse_pci() failed with rc=-22
Now, with this applied, we see the following specific message:
[16.154] pci 0014:60:00.1: of_irq_parse_pci: no interrupt-map found,
INTx interrupts not available
Finally, we standardize the error path in of_irq_parse_raw() by always
taking the fail path instead of returning directly from the loop.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
The dma_fence.error field (formerly known as dma_fence.status) is an
optional field that may be set by drivers before calling
dma_fence_signal(). The field can be used to indicate that the fence was
completed in err rather than with success, and is visible to other
consumers of the fence and to userspace via sync_file.
This patch renames the field from status to error so that its meaning is
hopefully more clear (and distinct from dma_fence_get_status() which is
a composite between the error state and signal state) and adds a helper
that validates the preconditions of when it is suitable to adjust the
error field.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170104141222.6992-3-chris@chris-wilson.co.uk
Replace the sparse 256-pointer array for looking up protocol strings by
a switch() statement to reduce kernel size.
According to bloat-o-meter, this saves 910 bytes on m68k (32-bit), and
1892 bytes on arm64 (64-bit).
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Use SECINITSID_SECURITY as the default SID for booleans which don't have
a matching SID returned from security_genfs_sid(), also update the
error message to a warning which matches this.
This prevents the policy failing to load (and consequently the system
failing to boot) when there is no default genfscon statement matched for
the selinuxfs in the new policy.
Signed-off-by: Gary Tierney <gary.tierney@gmx.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Adds error logging to the code paths which can fail when loading a new
policy in sel_write_load(). If the policy fails to be loaded from
userspace then a warning message is printed, whereas if a failure occurs
after loading policy from userspace an error message will be printed
with details on where policy loading failed (recreating one of /classes/,
/policy_capabilities/, /booleans/ in the SELinux fs).
Also, if sel_make_bools() fails to obtain an SID for an entry in
/booleans/* an error will be printed indicating the path of the
boolean.
Signed-off-by: Gary Tierney <gary.tierney@gmx.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Processes can only alter their own security attributes via
/proc/pid/attr nodes. This is presently enforced by each individual
security module and is also imposed by the Linux credentials
implementation, which only allows a task to alter its own credentials.
Move the check enforcing this restriction from the individual
security modules to proc_pid_attr_write() before calling the security hook,
and drop the unnecessary task argument to the security hook since it can
only ever be the current task.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
SELinux was sometimes using the task "objective" credentials when
it could/should use the "subjective" credentials. This was sometimes
hidden by the fact that we were unnecessarily passing around pointers
to the current task, making it appear as if the task could be something
other than current, so eliminate all such passing of current. Inline
various permission checking helper functions that can be reduced to a
single avc_has_perm() call.
Since the credentials infrastructure only allows a task to alter
its own credentials, we can always assume that current must be the same
as the target task in selinux_setprocattr after the check. We likely
should move this check from selinux_setprocattr() to proc_pid_attr_write()
and drop the task argument to the security hook altogether; it can only
serve to confuse things.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
commit aad82892af ("selinux: Add support for
unprivileged mounts from user namespaces") prohibited any use of context
mount options within non-init user namespaces. However, this breaks
use of context mount options for tmpfs mounts within user namespaces,
which are being used by Docker/runc. There is no reason to block such
usage for tmpfs, ramfs or devpts. Exempt these filesystem types
from this restriction.
Before:
sh$ userns_child_exec -p -m -U -M '0 1000 1' -G '0 1000 1' bash
sh# mount -t tmpfs -o context=system_u:object_r:user_tmp_t:s0:c13 none /tmp
mount: tmpfs is write-protected, mounting read-only
mount: cannot mount tmpfs read-only
After:
sh$ userns_child_exec -p -m -U -M '0 1000 1' -G '0 1000 1' bash
sh# mount -t tmpfs -o context=system_u:object_r:user_tmp_t:s0:c13 none /tmp
sh# ls -Zd /tmp
unconfined_u:object_r:user_tmp_t:s0:c13 /tmp
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
commit 79c8b348f215 ("selinux: support distinctions among all network
address families") mapped datagram ICMP sockets to the new icmp_socket
security class, but left ICMPv6 sockets unchanged. This change fixes
that oversight to handle both kinds of sockets consistently.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Since kernel 4.1 ftrace is supported as a new separate filesystem. It
gets automatically mounted by the kernel under the old path
/sys/kernel/debug/tracing. Because it lives now on a separate filesystem
SELinux needs to be updated to also support setting SELinux labels
on tracefs inodes. This is required for compatibility in Android
when moving to Linux 4.1 or newer.
Signed-off-by: Yongqin Liu <yongqin.liu@linaro.org>
Signed-off-by: William Roberts <william.c.roberts@intel.com>
Acked-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Extend SELinux to support distinctions among all network address families
implemented by the kernel by defining new socket security classes
and mapping to them. Otherwise, many sockets are mapped to the generic
socket class and are indistinguishable in policy. This has come up
previously with regard to selectively allowing access to bluetooth sockets,
and more recently with regard to selectively allowing access to AF_ALG
sockets. Guido Trentalancia submitted a patch that took a similar approach
to add only support for distinguishing AF_ALG sockets, but this generalizes
his approach to handle all address families implemented by the kernel.
Socket security classes are also added for ICMP and SCTP sockets.
Socket security classes were not defined for AF_* values that are reserved
but unimplemented in the kernel, e.g. AF_NETBEUI, AF_SECURITY, AF_ASH,
AF_ECONET, AF_SNA, AF_WANPIPE.
Backward compatibility is provided by only enabling the finer-grained
socket classes if a new policy capability is set in the policy; older
policies will behave as before. The legacy redhat1 policy capability
that was only ever used in testing within Fedora for ptrace_child
is reclaimed for this purpose; as far as I can tell, this policy
capability is not enabled in any supported distro policy.
Add a pair of conditional compilation guards to detect when new AF_* values
are added so that we can update SELinux accordingly rather than having to
belatedly update it long after new address families are introduced.
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Now that we have a common pinctrl driver for all the sun5i SoCs, we can
remove the old, separate drivers.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Now that it's obvious what the helpers do, we can simplify the code
somewhat by using them when clearing the pdpe/pml4e with the relevant
scratch entry.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161213160512.7008-1-matthew.auld@intel.com
The function name gen8_setup_page_directory_pointer is misleading, and
only serves to confuse the reader, it's not setting up a pdp, but
rather encoding a specific pml4e with a given pdp.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The function name gen8_setup_page_directory is misleading, and only
serves to confuse the reader, it's not setting up a pd, but rather
encoding a specific pdpe with a given pd.
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The sun5i SoCs (A10s, A13, GR8) are all based on the same die fit in
different packages. Hence, the pins and functions available are just the
based on the same set, each SoC having a different subset.
Introduce a common pinctrl driver that supports multiple variants to allow
to put as much as we can in common.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Some SoCs are either supposed to be pin compatible (A10 and A20 for
example), or are just repackaged versions of the same die (A10s, A13, GR8).
In those case, having a full blown pinctrl driver just introduces
duplication in both data size and maintainance effort.
Add a variant option to both pins and functions to be able to limit the
pins and functions described only to a subset of the SoC we support with a
given driver.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The fence->status is an optional field that is only valid once the fence
has been signaled. (Driver may fill the fence->status with an error code
prior to calling dma_fence_signal().) Given the restriction upon its
validity, wrap querying of the fence->status into a helper
dma_fence_get_status().
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170104141222.6992-2-chris@chris-wilson.co.uk
As the fence->status is an optional field that may be set before
dma_fence_signal() is called to convey that the fence completed with an
error, we have to ensure that it is always set to zero on initialisation
so that the typical use (i.e. unset) always flags a successful completion.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sumit Semwal <sumit.semwal@linaro.org>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170104141222.6992-1-chris@chris-wilson.co.uk
Revert to using direct register writes to set the divisor and
line-control registers.
A recent change switched to using the init vendor command to update
these registers, something which also enabled support for CH341A
devices. It turns out that simply setting bit 7 in the divisor register
is sufficient to support CH341A and specifically prevent data from being
buffered until a full endpoint-size packet (32 bytes) has been received.
Using the init command also had the side-effect of temporarily
deasserting the DTR/RTS signals on every termios change (including
initialisation on open) something which for example could cause problems
in setups where DTR is used to trigger a reset.
Fixes: 4e46c410e0 ("USB: serial: ch341: reinitialize chip on
reconfiguration")
Signed-off-by: Johan Hovold <johan@kernel.org>
A recent change added support for modifying the default line-control
settings, but did not make sure that the modified settings were used as
part of reconfiguration after a device has been reset during resume.
This caused a port that was open before suspend to be unusable until
being closed and reopened.
Fixes: ba781bdf86 ("USB: serial: ch341: add support for parity, frame
length, stop bits")
Signed-off-by: Johan Hovold <johan@kernel.org>
Fix reset-resume handling which failed to resubmit the read and
interrupt URBs, thereby leaving a port that was open before suspend in a
broken state until closed and reopened.
Fixes: 1ded7ea47b ("USB: ch341 serial: fix port number changed after
resume")
Fixes: 2bfd1c96a9 ("USB: serial: ch341: remove reset_resume callback")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Make sure to stop the interrupt URB before returning on errors during
open.
Fixes: 664d5df92e ("USB: usb-serial ch341: support for DTR/RTS/CTS")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
The modem-control signals are managed by the tty-layer during open and
should not be asserted prematurely when set_termios is called from
driver open.
Also make sure that the signals are asserted only when changing speed
from B0.
Fixes: 664d5df92e ("USB: usb-serial ch341: support for DTR/RTS/CTS")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
The private baud_rate variable is used to configure the port at open and
reset-resume and must never be set to (and left at) zero or reset-resume
and all further open attempts will fail.
Fixes: aa91def41a ("USB: ch341: set tty baud speed according to tty
struct")
Fixes: 664d5df92e ("USB: usb-serial ch341: support for DTR/RTS/CTS")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
DTR and RTS will be asserted by the tty-layer when the port is opened
and deasserted on close (if HUPCL is set). Make sure the initial state
is not-asserted before the port is first opened as well.
Fixes: 664d5df92e ("USB: usb-serial ch341: support for DTR/RTS/CTS")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Checks on the operand to VMXON are performed after the check for
legacy mode operation and the #GP checks, according to the pseudo-code
in Intel's SDM.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
On interrupt delivery the PPR can only grow (except for auto-EOI),
so it is impossible that non-auto-EOI interrupt delivery results
in KVM_REQ_EVENT. We can therefore use __apic_update_ppr.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On PPR update, we set KVM_REQ_EVENT unconditionally anytime PPR is lowered.
But we can take into account IRR here already.
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PPR needs to be updated whenever on every IRR read because we
may have missed TPR writes that _increased_ PPR. However, these
writes need not generate KVM_REQ_EVENT, because either KVM_REQ_EVENT
has been set already in __apic_accept_irq, or we are going to
process the interrupt right away.
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since we're already in VCPU context, all we have to do here is recompute
the PPR value. That will in turn generate a KVM_REQ_EVENT if necessary.
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This statistic can be useful to estimate the cost of an IRQ injection
scenario, by comparing it with irq_injections. For example the stat
shows that sti;hlt triggers more KVM_REQ_EVENT than sti;nop.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a guest causes a NPF which requires emulation, KVM sometimes walks
the guest page tables to translate the GVA to a GPA. This is unnecessary
most of the time on AMD hardware since the hardware provides the GPA in
EXITINFO2.
The only exception cases involve string operations involving rep or
operations that use two memory locations. With rep, the GPA will only be
the value of the initial NPF and with dual memory locations we won't know
which memory address was translated into EXITINFO2.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
LAPIC after reset is in xAPIC mode, which poses a problem for hotplug of
VCPUs with high APIC ID, because reset VCPU is waiting for INIT/SIPI,
but there is no way to uniquely address it using xAPIC.
From many possible options, we chose the one that also works on real
hardware: accepting interrupts addressed to LAPIC's x2APIC ID even in
xAPIC mode.
KVM intentionally differs from real hardware, because real hardware
(Knights Landing) does just "x2apic_id & 0xff" to decide whether to
accept the interrupt in xAPIC mode and it can deliver one interrupt to
more than one physical destination, e.g. 0x123 to 0x123 and 0x23.
Fixes: 682f732ecf ("KVM: x86: bump MAX_VCPUS to 288")
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Slow path tried to prevent IPIs from x2APIC VCPUs from being delivered
to xAPIC VCPUs and vice-versa. Make slow path behave like fast path,
which never distinguished that.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There were three calls sites:
- recalculate_apic_map and kvm_apic_match_physical_addr, where it would
only complicate implementation of x2APIC hotplug;
- in apic_debug, where it was still somewhat preserved, but keeping the
old function just for apic_debug was not worth it
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Interrupt to self can be sent without knowing the APIC ID.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a brief description of the lockless access tracking mechanism
to the documentation of fast page faults in locking.txt.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This change implements lockless access tracking for Intel CPUs without EPT
A bits. This is achieved by marking the PTEs as not-present (but not
completely clearing them) when clear_flush_young() is called after marking
the pages as accessed. When an EPT Violation is generated as a result of
the VM accessing those pages, the PTEs are restored to their original values.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MMIO SPTEs currently set both bits 62 and 63 to distinguish them as special
PTEs. However, bit 63 is used as the SVE bit in Intel EPT PTEs. The SVE bit
is ignored for misconfigured PTEs but not necessarily for not-Present PTEs.
Since MMIO SPTEs use an EPT misconfiguration, so using bit 63 for them is
acceptable. However, the upcoming fast access tracking feature adds another
type of special tracking PTE, which uses not-Present PTEs and hence should
not set bit 63.
In order to use common bits to distinguish both type of special PTEs, we
now use only bit 62 as the special bit.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
mmu_spte_update() tracks changes in the accessed/dirty state of
the SPTE being updated and calls kvm_set_pfn_accessed/dirty
appropriately. However, in some cases (e.g. when aging the SPTE),
this shouldn't be done. mmu_spte_update_no_track() is introduced
for use in such cases.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This simplifies mmu_spte_update() a little bit.
The checks for clearing of accessed and dirty bits are refactored into
separate functions, which are used inside both mmu_spte_update() and
mmu_spte_clear_track_bits(), as well as kvm_test_age_rmapp(). The new
helper functions handle both the case when A/D bits are supported in
hardware and the case when they are not.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This change adds retries into the Fast Page Fault path. Without the
retries, the code still works, but if a retry does end up being needed,
then it will result in a second page fault for the same memory access,
which will cause much more overhead compared to just retrying within the
original fault.
This would be especially useful with the upcoming fast access tracking
change, as that would make it more likely for retries to be needed
(e.g. due to read and write faults happening on different CPUs at
the same time).
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This change renames spte_is_locklessly_modifiable() to
spte_can_locklessly_be_made_writable() to distinguish it from other
forms of lockless modifications. The full set of lockless modifications
is covered by spte_has_volatile_bits().
Signed-off-by: Junaid Shahid <junaids@google.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>