Commit graph

661,541 commits

Author SHA1 Message Date
Ville Syrjälä
8581f1b5ee drm/i915: Force VDD off on the new power seqeuencer before starting to use it
Apparently some VLV BIOSen like to leave the VDD force bit enabled
even for power seqeuncers that aren't properly hooked up to any
port. That will result in a imbalance in the AUX power domain
refcount when we stat to use said power sequencer as edp_panel_vdd_on()
will not grab the power domain reference if it sees that the VDD is
already on.

To fix this let's make sure we turn off the VDD force bit when we
initialize the power sequencer registers. That is, unless it's
being done from the init path since there we are actually
initializing the registers for the current power sequencer and
we don't want to turn VDD off needlessly as that would require
waiting for the power cycle delay before we turn it back on.

This fixes the following kind of warnings:
WARNING: CPU: 0 PID: 123 at ../drivers/gpu/drm/i915/intel_runtime_pm.c:1455 intel_display_power_put+0x13a/0x170 [i915]()
WARN_ON(!power_domains->domain_use_count[domain])
...

v2: Fix typos in comment (David)

Cc: stable@vger.kernel.org
Cc: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Tested-by: Matwey V. Kornilov <matwey.kornilov@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98695
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161220165117.24801-1-ville.syrjala@linux.intel.com
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
(cherry picked from commit 5d5ab2d26f)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2017-01-03 11:36:11 +02:00
Neil Armstrong
dcafc45dcb drm/meson: Fix plane atomic check when no crtc for the plane
When no CRTC is associated with the plane, the meson_plane_atomic_check()
call breaks the kernel with an Oops.

Fixes: bbbe775ec5 ("drm: Add support for Amlogic Meson Graphic Controller")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2017-01-03 10:23:02 +01:00
Bartosz Golaszewski
b631436ec4 ARM: davinci_all_defconfig: enable dumb vga-dac drm bridge
This enables the dumb-vga-dac driver by default for davinci boards.

The driver is needed for tilcdc support on da850-lcdk board.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-03 14:51:48 +05:30
Marc Gonzalez
7165b8ad36 mtd: nand: tango: Update DT binding description
Visually separate register ranges (address/size pairs) in reg prop.
Change DMA channel name, for consistency with other drivers.

Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-01-03 09:51:13 +01:00
Linus Walleij
6ac4c1ad2e pinctrl: amd: fix compilation warning
3bfd44306c ("pinctrl: amd: Add support for additional GPIO")
created the following warning:

drivers/pinctrl/pinctrl-amd.c: In function 'amd_gpio_dbg_show':
drivers/pinctrl/pinctrl-amd.c:210:3: warning: 'pin_num' may be used uninitialized in this function [-Wmaybe-uninitialized]
   for (; i < pin_num; i++) {
   ^
drivers/pinctrl/pinctrl-amd.c:172:21: warning: 'i' may be used uninitialized in this function [-Wmaybe-uninitialized]
  unsigned int bank, i, pin_num;
                     ^
Fix this by adding a guarding default case for illegal
bank numbers.

Cc: S-k Shyam-sundar <Shyam-sundar.S-k@amd.com>
Cc: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-03 09:26:21 +01:00
Gary Bisson
3fd6d6ad73 pinctrl: imx: use generic pinmux helpers for managing functions
Now using function_desc structure instead of imx_pmx_func.

Also leveraging generic functions to retrieve functions count/name/groups.

The imx_free_funcs function can be removed since it is now handled by
the core driver during unregister.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-03 09:26:21 +01:00
Gary Bisson
e566fc11ea pinctrl: imx: use generic pinctrl helpers for managing groups
Now using group_desc structure instead of imx_pin_group.

Also leveraging generic functions to retrieve groups count/name/pins.

The imx_free_pingroups function can be removed since it is now handled by
the core driver during unregister.

Finally the device tree parsing is moved after the pinctrl driver registration
since this latter initializes the radix trees.

Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-03 09:26:20 +01:00
Linus Walleij
824e4d954d pinctrl: qcom: msm8660: rename some SDC1->SDC4
These four pins are for SDC4, not SDC1. They are grouped for
SDC4 later in the file so this must be a typo.

Reviewed-by: Björn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-03 09:26:20 +01:00
Tony Lindgren
571aec4df5 pinctrl: single: Use generic pinmux helpers for managing functions
We can now drop the driver specific code for managing functions.

Signed-off-by: Tony Lindgren <tony@atomide.com>
[Replaces GENERIC_PINMUX with GENERIC_PINMUX_FUNCTIONS]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-03 09:26:19 +01:00
Tony Lindgren
caeb774ea3 pinctrl: single: Use generic pinctrl helpers for managing groups
We can now drop the driver specific code for managing groups.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-03 09:26:19 +01:00
Tony Lindgren
a76edc89b1 pinctrl: core: Add generic pinctrl functions for managing groups
We can add generic helpers for function handling for cases where the pin
controller driver does not need to use static arrays.

Signed-off-by: Tony Lindgren <tony@atomide.com>
[Renamed the Kconfig item and moved things around]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-03 09:26:18 +01:00
Linus Walleij
c033a718f6 pinctrl: stricten up generic group code
Rename the symbol PINCTRL_GENERIC to PINCTRL_GENERIC_GROUPS since
it all pertains to groups. Replace everywhere.

ifdef out the radix tree and the struct when not using the
generic groups.

Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-03 09:26:18 +01:00
Tony Lindgren
c7059c5ac7 pinctrl: core: Add generic pinctrl functions for managing groups
We can add generic helpers for pin group handling for cases where the pin
controller driver does not need to use static arrays.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-03 09:26:17 +01:00
Linus Walleij
2d22e5b006 pinctrl: add some comments to the hog/late init code
It confused me a bit so it may confuse others. Make it crystal
clear what is going on here for any future readers.

Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-03 09:26:17 +01:00
Tony Lindgren
99e4f67508 pinctrl: core: Use delayed work for hogs
Having the pin control framework call pin controller functions
before it's probe has finished is not nice as the pin controller
device driver does not yet have struct pinctrl_dev handle.

Let's fix this issue by adding deferred work for late init. This is
needed to be able to add pinctrl generic helper functions that expect
to know struct pinctrl_dev handle. Note that we now need to call
create_pinctrl() directly as we don't want to add the pin controller
to the list of controllers until the hogs are claimed. We also need
to pass the pinctrl_dev to the device tree parser functions as they
otherwise won't find the right controller at this point.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-03 09:26:16 +01:00
Baoyou Xie
eb2e2a8168 arm64: dts: zx: support cpu-freq for zx296718
This patch adds the CPU clock phandle in CPU's node
and uses operating-points-v2 to register operating points.

So it can be used by cpufreq-dt driver.

Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-03 15:33:15 +08:00
Jagan Teki
cbc3ad1317 ARM: dts: imx6ul: Add Engicam Is.IoT MX6UL initial support
Is.IoT MX6UL modules are system on module solutions manufactured by
Engicam for IOT connectivity applications with following characteristics:
CPU     NXP i.MX6UL (G2) Cortex-A7@528 MHz
RAM     Up to 512 MB LvDDR3@800MT/s
NAND    256MB (option)
eMMC    4GB (option)
LCD     18 bit parallel
BT      2.1+EDR,Bluetooth 3.0, Bluetooth 4.1 (Bluetooth low energy)
WLAN    IEEE 802.11 b/g/n (single stream n)

Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-03 14:54:39 +08:00
Jagan Teki
84ebdaa255 ARM: dts: imx6q-icore-rqs: Update model to support Dual SOM
Engicam i.CoreM6 Dual and Quad SOM's use same dts file, hence
update model name to add Dual and also added full mode decsription.

Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-03 14:54:34 +08:00
Jagan Teki
7a9caba55a ARM: dts: imx6dl: Add Engicam i.CoreM6 DualLite/Solo RQS initial support
i.CoreM6 DualLite/Solo modules are system on module solutions manufactured
by Engicam with following characteristics:
CPU           NXP i.MX6 DL, 800MHz
RAM           1GB, 32, 64 bit, DDR3-800/1066
NAND          SLC,512MB
Power supply  Single 5V
MAX LCD RES   FULLHD

and more info at
http://www.engicam.com/en/products/embedded/som/standard/i-core-rqs-m6s-dl-d-q

Cc: Matteo Lisi <matteo.lisi@engicam.com>
Cc: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-03 14:54:26 +08:00
Fabio Estevam
c1cbd60fe0 ARM: imx_v6_v7_defconfig: Select wireless extensions option
Select CONFIG_CFG80211_WEXT so that wireless can work out of the box
when using userspace tools such as 'iwconfig'.

Generated by manually selecting CONFIG_CFG80211_WEXT and
then running:

make savedefconfig
cp defconfig arch/arm/configs/imx_v6_v7_defconfig

, which results in additional cleanup.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-03 14:21:54 +08:00
Meng Yi
6c05f0f2e5 arm64: dts: ls2080a-rdb: remove disable status of pca9547
pca9547 won't probed since its status property is disabled.
while there are devices connected to it, we need remove status
property to let ds3232 and adt7461 probed correctly.

Signed-off-by: Meng Yi <meng.yi@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-03 14:15:07 +08:00
Fabio Estevam
27958ccdf2 ARM: dts: imx: Remove unexistant property
Property 'anatop-enable-bit' does not exist, so just remove it.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-03 13:57:44 +08:00
Fabio Estevam
5fdb98dcfb ARM: mach-mx27_3ds: Remove camera support
Since commit 6b879edf75 ("[media] staging/media: remove deprecated
mx2 driver") the mx2 camera driver has been removed, so remove the camera
support from the board file as well.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-03 13:52:38 +08:00
Fabio Estevam
790e383dd7 ARM: mach-pcm037: Remove camera support
Since commit c93cc61475 ("[media] staging/media: remove deprecated
mx3 driver") the mx3 camera driver has been removed, so remove the camera
support from the board file as well.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-03 13:52:34 +08:00
Fabio Estevam
cc7969a189 ARM: mach-mx35_3ds: Remove camera support
Since commit c93cc61475 ("[media] staging/media: remove deprecated
mx3 driver") the mx3 camera driver has been removed, so remove the camera
support from the board file as well.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-03 13:52:31 +08:00
Fabio Estevam
9eba4b8e59 ARM: mx31moboard-smartbot: Remove camera support
Since commit c93cc61475 ("[media] staging/media: remove deprecated
mx3 driver") the mx3 camera driver has been removed, so remove the camera
support from the board file as well.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-03 13:52:28 +08:00
Fabio Estevam
a20bb25fa2 ARM: mx31moboard-marxbot: Remove camera support
Since commit c93cc61475 ("[media] staging/media: remove deprecated
mx3 driver") the mx3 camera driver has been removed, so remove the camera
support from the board file as well.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-03 13:52:25 +08:00
Fabio Estevam
7b239307db ARM: mach-mx31_3ds: Remove camera support
Since commit c93cc61475 ("[media] staging/media: remove deprecated
mx3 driver") the mx3 camera driver has been removed, so remove the camera
support from the board file as well.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Magnus Lilja <lilja.magnus@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-03 13:51:56 +08:00
Kevin Hilman
88b00d2d78 ARM: davinci_all_defconfig: enable video capture as modules
Enable media support and V4L2 capture, along with video decoders used
on da850 platforms.

Tested on da850-lcdk.

Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2017-01-03 11:18:37 +05:30
M'boumba Cedric Madianga
276b0046ff dmaengine: stm32-dma: Add max_burst support
This patch sets the max_burst value supported by the STM32 DMA

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-01-03 09:23:23 +05:30
M'boumba Cedric Madianga
dc80867510 dmaengine: stm32-dma: Add synchronization support
Implement the new device_synchronize() callback to allow proper
synchronization when stopping a channel.

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-01-03 09:23:23 +05:30
M'boumba Cedric Madianga
2b12c5580e dmaengine: stm32-dma: Fix residue computation issue in cyclic mode
This patch resolves the residue computation issue detected in cyclic mode.
Now, in cyclic mode, we increment next_sg variable as soon as a period is
transferred instead of after pushing a new sg request.
Then, we take into account that after transferring a complete buffer,
the next_sg variable is equal to 0.

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Reviewed-by: Ludovic BARRE <ludovic.barre@st.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-01-03 09:23:17 +05:30
M'boumba Cedric Madianga
8d1b76f031 dmaengine: stm32-dma: Rework starting transfer management
This patch reworks the way to manage transfer starting.
Now, starting DMA is only allowed when the channel is not busy.
Then, stm32_dma_start_transfer is declared as void.
At least, after each transfer completion, we start the next transfer if a
new descriptor as been queued in the issued list during an ongoing
transfer.

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Reviewed-by: Ludovic BARRE <ludovic.barre@st.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-01-03 09:23:17 +05:30
M'boumba Cedric Madianga
16545502d7 dt-bindings: stm32-dma: Fix typo regarding DMA client binding
Only four cells are required for dma client binding not five.

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Reviewed-by: Ludovic BARRE <ludovic.barre@st.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-01-03 09:23:17 +05:30
M'boumba Cedric Madianga
ddf9bd4089 dmaengine: stm32-dma: Fix typo in Kconfig
As STM32 DMA driver is only used as buit-in driver, it couldn't be used as
module.

Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com>
Reviewed-by: Ludovic BARRE <ludovic.barre@st.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-01-03 09:23:17 +05:30
Marek Szyprowski
5c9e6c2b2b dmaengine: pl330: Fix runtime PM support for terminated transfers
PL330 DMA engine driver is leaking a runtime reference after any terminated
DMA transactions. This patch fixes this issue by tracking runtime PM state
of the device and making additional call to pm_runtime_put() in terminate_all
callback if needed.

Fixes: ae43b32891 ("ARM: 8202/1: dmaengine: pl330: Add runtime Power Management support v12")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-01-03 09:18:13 +05:30
Nicolas Ferre
f53243b563 MAINTAINERS: dmaengine: Update + Hand over the at_hdmac driver to Ludovic
Hand over the Microchip / Atmel DMA driver handled by at_hdmac driver
to Ludovic who is responsible for the newer at_xdmac driver as well.
Also update the entry name and position to follow company changes.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-01-03 09:13:05 +05:30
Peter Ujfalusi
836c3ce256 dmaengine: omap-dma: Fix dynamic lch_map allocation
The original patch did not done what it was supposed to be doing and even
worst it broke legacy boot (OMAP1).

The lch_map size should be the number of available logical channels in sDMA
and the od->dma_requests should store the number of available DMA request
lines usable in sDMA.

In legacy mode we do not have a way to get the DMA request count, in that
case we use OMAP_SDMA_REQUESTS (127), despite the fact that OMAP1510 have
only 31 DMA request line.

Fixes: 2d1a9a946f ("dmaengine: omap-dma: Dynamically allocate memory for lch_map")
Reported-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: stable@vger.kernel.org   # v4.9
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-01-03 09:10:15 +05:30
Fabio Estevam
116dad7d43 ARM: dts: imx6: Disable "weim" node in the dtsi files
Commit 1be81ea586 ("ARM: dts: imx6: Add imx-weim parameters to
dtsi's") causes the following probe error when the weim node is not
present on the board dts (such as imx6q-sabresd):

imx-weim 21b8000.weim: Invalid 'ranges' configuration
imx-weim: probe of 21b8000.weim failed with error -22

There is no need to always enable the "weim" node on mx6. Do the same
as in the other i.MX dtsi files where "weim" is disabled and only gets
enabled on a per dts basis.

All the imx6 weim dts users explicitily provide 'status = "okay"', so
this change has no impact on current imx6 weim users.

If a board does not use the weim driver it will not describe its 'ranges'
property, so simply disable the 'weim' node in the imx6 dtsi files to
avoid such probe error message.

Fixes: 1be81ea586 ("ARM: dts: imx6: Add imx-weim parameters to dtsi's")
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2017-01-03 10:59:07 +08:00
Linus Torvalds
c8b4ec8351 Two fscrypt bug fixes, one of which was unmasked by an update to the
crypto tree during the merge window.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlhrCIIACgkQ8vlZVpUN
 gaP0rAf8DehnxAXTdGwCDKJ76Xgkd4C0vYwNYsWrwbEsD6dMXPmfhDVA40ZefFWY
 4UQaPeoDSXQnIxw+6gi6LFCJeYs+dc9ZWHk++w5kEMclIUONomODDAQLMJbpG+5t
 pkEwOzjTaKbIQ5n4r3rMJtlBlrZX+ZVJmMt3sYAMWhIq7Bf7dRy6AC7+vyM5VTce
 AYvFpureLd7pJT0AcNvg5oPnXIFiPlKi6knlmAdJ32I4FQQO07aDA37mLPKdff4/
 uKs4PGKTa9MCGw+blMDJ/208kBQPPn8JZ7yGQCdGw16CUaoSXLregqu6SNs2MKaQ
 WjmBFyEUssScTeAq8rYJVlU7FYxwdQ==
 =VVfb
 -----END PGP SIGNATURE-----

Merge tag 'fscrypt-for-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt

Pull fscrypt fixes from Ted Ts'o:
 "Two fscrypt bug fixes, one of which was unmasked by an update to the
  crypto tree during the merge window"

* tag 'fscrypt-for-stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt:
  fscrypt: fix renaming and linking special files
  fscrypt: fix the test_dummy_encryption mount option
2017-01-02 18:32:59 -08:00
Chanwoo Choi
32dd773169 PM / devfreq: exynos-bus: Fix the wrong return value
This patch fixes the wrong return value. If devfreq driver requires the wrong
and non-available governor, it is fail. So, this patch returns the error
insead of -EPROBE_DEFER.

Fixes: 403e0689d2 (PM / devfreq: exynos: Add support of bus frequency of sub-blocks using passive governor)
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-03 00:21:45 +01:00
Chanwoo Choi
73613b16cb PM / devfreq: Fix the bug of devfreq_add_device when governor is NULL
This patch fixes the bug of devfreq_add_device(). The devfreq device must
have the default governor. If find_devfreq_governor() returns error,
devfreq_add_device() fail to add the devfreq instance.

Fixes: 1b5c1be2c8 (PM / devfreq: map devfreq drivers to governor using name)
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-03 00:21:45 +01:00
Chanwoo Choi
9932ef3ca7 MAINTAINERS: Add myself as reviewer for DEVFREQ subsystem support
Add myself to the DEVFREQ entry as reviewer, I've been helping reviewing
and tesing the devfreq support patches for the couple of years. Also,
I'm going to contribute the improvement for devfreq subsystem. It would
be easier for me for review if I'm cc'ed for patches.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-03 00:21:45 +01:00
Rafael J. Wysocki
6e092c8c04 PM / docs: Drop confusing kernel-doc references from infrastructure.rst
The references to drivers/base/power/main.c and
drivers/acpi/scan.c from Documentation/driver-api/infrastructure.rst
are confusing.  They both cause descriptions of functions that are
not relevant to device drivers at all to be generated and none of
them is sufficient to cover the API in a meaningful way.

Drop them for now.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Jonathan Corbet <corbet@lwn.net>
2017-01-03 00:07:09 +01:00
Bob Moore
57707a9a77 ACPICA: Resources: Not a valid resource if buffer length too long
ACPICA commit 9f76de2d249b18804e35fb55d14b1c2604d627a1
ACPICA commit b2e89d72ef1e9deefd63c3fd1dee90f893575b3a
ACPICA commit 23b5bbe6d78afd3c5abf3adb91a1b098a3000b2e

The declared buffer length must be the same as the length of the
byte initializer list, otherwise not a valid resource descriptor.

Link: 9f76de2d
Link: b2e89d72
Link: 23b5bbe6
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-02 23:18:47 +01:00
Bob Moore
7225d0467c ACPICA: Utilities: Update debug output
ACPICA commit 082b5b3ee31f74735e166858eeda025288604a5a

Enhancement of miscellaneous debug output.

Link: 082b5b3e
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-02 23:18:46 +01:00
David E. Box
a654b8ca6d ACPICA: Disassembler: Add Switch/Case disassembly support
ACPICA commit 0f6cc80e8af519a3c31184367b0a9be7a399cf53

iasl compiles Switch/Case statements into a single iteration While
loop with If/Else statements. This patch adds support to recognize
this generated compiler output and disassemble it back to the
original Switch statement.

Linux kernel is not affected by this patch.

Link: 0f6cc80e
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-02 23:18:45 +01:00
Lv Zheng
5533308939 ACPICA: EFI: Add efihello demo application
ACPICA commit 3fcc59f4755607dd066ac8ef869f0aa95e871b84

This patch adds a demo EFI application for stdin/stdout testing. This
utility can be used to narrow down root causes of porting issues.

Linux is not affected by this patch.

Link: 3fcc59f4
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-02 23:18:43 +01:00
Lv Zheng
0822d4f4f8 ACPICA: MSVC: Fix MSVC6 build issues
ACPICA commit fa0680030a2969e1085563da633713e1c321637c

Build environment has changed because of new improvements:

 1. New files are split
 2. New inclusion order

This patch updates MSVC project files accordingly.

Linux is not affected by this patch.

Link: fa068003
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-02 23:18:43 +01:00
Colin Ian King
23741569dc ACPICA: Linux-specific header: Add support for s390x compilation
ACPICA commit ecac9504e32d3b501c8cb021afb253b4a83fc82f

Adds s390x as a 64-bit architecture.

Link: ecac9504
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-01-02 23:18:42 +01:00