Steffen Klassert says:
====================
pull request (net): ipsec 2016-12-01
1) Change the error value when someone tries to run 32bit
userspace on a 64bit host from -ENOTSUPP to the userspace
exported -EOPNOTSUPP. Fix from Yi Zhao.
2) On inbound, ESN sequence numbers are already in network
byte order. So don't try to convert it again, this fixes
integrity verification for ESN. Fixes from Tobias Brunner.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
netlink kernel socket is protected by refcount, not RCU.
Its rcv path is neither protected by RCU. So the synchronize_net()
is just pointless.
Cc: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Raju Lakkaraju says:
====================
Adding PHY MDI(X) support
I updated all review comments which were given by Andrew and Florian.
This series add support for PHY MDI(X), and implement it for MSCC phys.
Tested on Beaglebone Black with VSC 8531 PHY.
Change set:
v1:
- Initial patch submit the WoL and MDI-X in single set of patches
v2:
- Split the mdi(x) as signal set of patches.
- Remove the out_unlock as suggested by Andrew.
- Add mdix_ctrl parameter in "phy_device" to handle the user configure
mdi(x). Proposed implementation accepted by Florian.
- phydev->mdix_ctrl initialize with ETH_TP_MDI_AUTO. Ethernet controller
never initialize this parameter.
- Fix the mdix changes in marvell and microchip driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
PHY drivers to have an eth_tp_mdix_ctrl to indicate what is the configured
MDI setting, and read eth_tp_mdi to indicate what is the current status,
Add new parameter mdix_ctrl in phy_device structure and fix driver.
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To connect two ports of the same configuration (MDI to MDI or
MDI-X to MDI-X) with a 10/100/1000 Mbit/s connection, an
Ethernet crossover cable is needed to cross over the transmit
and receive signals in the cable, so that they are matched at
the connector level.
When connecting an MDI port to an MDI-X port a straight through
cable is used while to connect two MDI ports or two MDI-X ports
a crossover cable must be used. Conventionally MDI is used on end
devices while MDI-X is used on hubs and switches
Auto MDI-X automatically detects the required cable connection
type and configures the connection appropriately, removing the
need for crossover cables to interconnect switches or connecting
PCs peer-to-peer.
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update the mdix and mdix_ctrl with corresponding ethtool configuration
parameters.
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add new parameter mdix_ctrl to hold the user configuration.
Existing mdix maintain the current status of MDI(X) crossover performed or
not.
mdix_ctrl can configure either ETH_TP_MDI or ETH_TP_MDI_X orETH_TP_MDI_AUTO.
Signed-off-by: Raju Lakkaraju <Raju.Lakkaraju@microsemi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
This is a large batch of Netfilter fixes for net, they are:
1) Three patches to fix NAT conversion to rhashtable: Switch to rhlist
structure that allows to have several objects with the same key.
Moreover, fix wrong comparison logic in nf_nat_bysource_cmp() as this is
expecting a return value similar to memcmp(). Change location of
the nat_bysource field in the nf_conn structure to avoid zeroing
this as it breaks interaction with SLAB_DESTROY_BY_RCU and lead us
to crashes. From Florian Westphal.
2) Don't allow malformed fragments go through in IPv6, drop them,
otherwise we hit GPF, patch from Florian Westphal.
3) Fix crash if attributes are missing in nft_range, from Liping Zhang.
4) Fix arptables 32-bits userspace 64-bits kernel compat, from Hongxu Jia.
5) Two patches from David Ahern to fix netfilter interaction with vrf.
From David Ahern.
6) Fix element timeout calculation in nf_tables, we take milliseconds
from userspace, but we use jiffies from kernelspace. Patch from
Anders K. Pedersen.
7) Missing validation length netlink attribute for nft_hash, from
Laura Garcia.
8) Fix nf_conntrack_helper documentation, we don't default to off
anymore for a bit of time so let's get this in sync with the code.
I know is late but I think these are important, specifically the NAT
bits, as they are mostly addressing fallout from recent changes. I also
read there are chances to have -rc8, if that is the case, that would
also give us a bit more time to test this.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Presume neglected in commit 786c1b5 "perf annotate: Start supporting
cross arch annotation". This doesn't fix a bug since none of the
affected arches support parsing dec/inc instructions yet.
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Chris Ryder <chris.ryder@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/20161130092333.1cca5dd2c77e1790d61c1e9c@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Code move only; no functional change intended.
Committer notes:
Fix the build on Ubuntu 16.04 x86-64 cross-compiling to S/390, with this
set of auto-detected features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ OFF ]
... libaudit: [ OFF ]
... libbfd: [ OFF ]
... libelf: [ on ]
... libnuma: [ OFF ]
... numa_num_possible_cpus: [ OFF ]
... libperl: [ OFF ]
... libpython: [ OFF ]
... libslang: [ OFF ]
... libcrypto: [ OFF ]
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ OFF ]
... get_cpuid: [ OFF ]
... bpf: [ on ]
Where it was failing with:
CC /tmp/build/perf/util/time-utils.o
util/time-utils.c: In function 'parse_nsec_time':
util/time-utils.c:17:13: error: implicit declaration of function 'strtoul' [-Werror=implicit-function-declaration]
time_sec = strtoul(str, &end, 10);
^
util/time-utils.c:17:2: error: nested extern declaration of 'strtoul' [-Werror=nested-externs]
time_sec = strtoul(str, &end, 10);
^
util/time-utils.c: In function 'perf_time__parse_str':
util/time-utils.c:93:2: error: implicit declaration of function 'free' [-Werror=implicit-function-declaration]
free(str);
^
util/time-utils.c:93:2: error: incompatible implicit declaration of built-in function 'free' [-Werror]
util/time-utils.c:93:2: note: include '<stdlib.h>' or provide a declaration of 'free'
Do as suggested and add a '#include <stdlib.h>' to get the free() and strtoul()
declarations and fix the build.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480439746-42695-3-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add function to parse a user time string of the form <start>,<stop>
where start and stop are time in sec.nsec format. Both start and stop
times are optional.
Add function to determine if a sample time is within a given time
time window of interest.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1480439746-42695-2-git-send-email-dsahern@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'vfio_group_get_from_dev()' seems to return only NULL on error, not an
error pointer.
Fixes: 2169037dc3 ("vfio iommu: Added pin and unpin callback functions to vfio_iommu_driver_ops")
Fixes: c086de818d ("vfio iommu: Add blocking notifier to notify DMA_UNMAP")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Factor out common code for setting REQ_NOMERGE flag which is being used
out at certain places and make it a helper instead, req_set_nomerge().
Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org>
Get rid of the inline.
Signed-off-by: Jens Axboe <axboe@fb.com>
These updates include a new driver for Fintek F8153x devices, support
for the GPIO functionality on CP2105 devices, and improved support for
CH34X devices.
Included are also some clean ups and fixes for various minor issues.
Signed-off-by: Johan Hovold <johan@kernel.org>
-----BEGIN PGP SIGNATURE-----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=FChe
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB-serial updates for v4.10-rc1
These updates include a new driver for Fintek F8153x devices, support
for the GPIO functionality on CP2105 devices, and improved support for
CH34X devices.
Included are also some clean ups and fixes for various minor issues.
Signed-off-by: Johan Hovold <johan@kernel.org>
We should move the ops->destroy(dev) after the list_del(&dev->vm_node)
so that we don't use "dev" after freeing it.
Fixes: a28ebea2ad ("KVM: Protect device ops->create and list_add with kvm->lock")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Many drivers (21 to be exact) create connectors that are always
connected (for instance to an LVDS or DSI panel). Instead of forcing
them to implement a dummy .detect() handler, make the callback optional
and consider the connector as always connected in that case.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Vincent Abriou <vincent.abriou@st.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
[seanpaul fixed small conflict in rcar-du/rcar_du_lvdscon.c]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Fix bug https://bugzilla.kernel.org/show_bug.cgi?id=188531. In function
mtip_block_initialize(), variable rv takes the return value, and its
value should be negative on errors. rv is initialized as 0 and is not
reset when the call to ida_pre_get() fails. So 0 may be returned.
The return value 0 indicates that there is no error, which may be
inconsistent with the execution status. This patch fixes the bug by
explicitly assigning -ENOMEM to rv on the branch that ida_pre_get()
fails.
Signed-off-by: Pan Bian <bianpan2016@163.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Add support for handling write zeroes command on target.
Call into __blkdev_issue_zeroout, which the block layer expands into the
best suitable variant of zeroing the LBAs. Allow write zeroes operation
to deallocate the LBAs when calling __blkdev_issue_zeroout.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@hgst.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Allow write zeroes operations (REQ_OP_WRITE_ZEROES) on the block
device, if the device supports optional command bit set for write
zeroes. Add support to setup write zeroes command. Set maximum possible
write zeroes sectors in one write zeroes command according to
nvme write zeroes command definition.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@hgst.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Add the command structure, optional command set support (ONCS) bit and
a new error code for the Write Zeroes command.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@hgst.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
This adds a new block layer operation to zero out a range of
LBAs. This allows to implement zeroing for devices that don't use
either discard with a predictable zero pattern or WRITE SAME of zeroes.
The prominent example of that is NVMe with the Write Zeroes command,
but in the future, this should also help with improving the way
zeroing discards work. For this operation, suitable entry is exported in
sysfs which indicate the number of maximum bytes allowed in one
write zeroes operation by the device.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@hgst.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Similar to __blkdev_issue_discard this variant allows submitting
the final bio asynchronously and chaining multiple ranges
into a single completion.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@hgst.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Both blkdev_report_zones and blkdev_reset_zones can operate on a partition of
a zoned block device. However, the first and last zones reported for a
partition make sense only if the partition start sector and size are aligned
on the device zone size. The same applies for zone reset. Resetting the first
or the last zone of a partition straddling zones may impact neighboring
partitions. Finally, if a partition start sector is not at the beginning of a
sequential zone, it will be impossible to write to the first sectors of the
partition on a host-managed device.
Avoid all these problems and incoherencies by ignoring partitions that are not
zone aligned.
Note: Even with CONFIG_BLK_DEV_ZONED disabled, bdev_is_zoned() will report the
correct disk zoning type (host-aware, host-managed or none) but
bdev_zone_size() will always return 0 for zoned block devices (i.e. the zone
size is unknown). So test this as a way to ensure that a zoned block device is
being handled as such. As a result, for a host-aware devices, unaligned zone
partitions will be accepted with CONFIG_BLK_DEV_ZONED disabled. That is, the
disk will be treated as a regular block device (as it should). If zoned block
device support is enabled, only aligned partitions will be accepted.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
A register used to identify chip during probe was overwritten during
firmware download and due to that later probe's for warm chip were
failing. Detect chip from the another register, which is located on
different register bank 2.
Fixes: 94d0eaa419 ("[media] mn88472: move out of staging to media")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
A register used to identify chip during probe was overwritten during
firmware download and due to that later probe's for warm chip were
failing. Detect chip from the another register, which is located on
different register bank 2.
Fixes: 7908fad99a ("[media] mn88473: finalize driver")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
"c77d17c0 [media] lirc: use-after free" introduces two problems:
cdev_del() can be called with a NULL argument, and the kobject_put()
path will cause a double free.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The musb driver is enabled but the phy and the glue
for the da8xx are not enabled.
Enable them.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Add Knights Mill (KNM) to the list of CPUIDs supported by intel_pstate.
Signed-off-by: Piotr Luc <piotr.luc@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The kernel Bugzilla is used for tracking cpufreq bugs, so document
that.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Len Brown <len.brown@intel.com>
This SoC has a separate pin controller for configuring pullup/pulldown
bias on groups of pins.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
- Do not call kvm_notify_acked for PPIs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=1IXI
-----END PGP SIGNATURE-----
Merge tag 'kvm-arm-for-4.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm
KVM/ARM updates for v4.9-rc7
- Do not call kvm_notify_acked for PPIs
Alarm timers are one of the mechanisms to wake up a system from suspend,
but there exist no tracepoints to analyse which process/thread armed an
alarmtimer.
Add tracepoints for start/cancel/expire of individual alarm timers and one
for tracing the suspend time decision when to resume the system.
The following trace excerpt illustrates the new mechanism:
Binder:3292_2-3304 [000] d..2 149.981123: alarmtimer_cancel:
alarmtimer:ffffffc1319a7800 type:REALTIME
expires:1325463120000000000 now:1325376810370370245
Binder:3292_2-3304 [000] d..2 149.981136: alarmtimer_start:
alarmtimer:ffffffc1319a7800 type:REALTIME
expires:1325376840000000000 now:1325376810370384591
Binder:3292_9-3953 [000] d..2 150.212991: alarmtimer_cancel:
alarmtimer:ffffffc1319a5a00 type:BOOTTIME
expires:179552000000 now:150154008122
Binder:3292_9-3953 [000] d..2 150.213006: alarmtimer_start:
alarmtimer:ffffffc1319a5a00 type:BOOTTIME
expires:179551000000 now:150154025622
system_server-3000 [002] ...1 162.701940: alarmtimer_suspend:
alarmtimer type:REALTIME expires:1325376840000000000
The wakeup time which is selected at suspend time allows to map it back to
the task arming the timer: Binder:3292_2.
[ tglx: Store alarm timer expiry time instead of some useless RTC relative
information, add proper type information for wakeups which are
handled via the clock_nanosleep/freezer and massage the changelog. ]
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Link: http://lkml.kernel.org/r/1480372524-15181-5-git-send-email-john.stultz@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
0-day testing encountered a NULL pointer dereference in a cpumask access
from tsc_store_and_check_tsc_adjust().
This happens when the function is called on the boot CPU and the topology
masks are not yet available due to CPUMASK_OFFSTACK=y.
Add a NULL pointer check for the mask pointer. If NULL it's safe to assume
that the CPU is the boot CPU and the first one in the package.
Fixes: 8b223bc7ab ("x86/tsc: Store and check TSC ADJUST MSR")
Reported-by: kernel test robot <xiaolong.ye@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The intel_idle driver is going to be maintained by Jacob Pan now, so
update MAINTAINERS accordingly.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Len Brown <len.brown@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The kernel Bugzilla is used for tracking bugs in the cpuidle core and
intel_idle, so document that.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Len Brown <len.brown@intel.com>
ACPICA commit 68af3c3aa238dd8040e846ac6b4827a016434d8d
During early OS boot stage, drivers that have mapped system memory should
unmap it during the same stage. Linux kernel has an error message
indicating the unbalanced early memory mappings.
This patch back ports such error message into ACPICA for the early table
mappings, so that ACPICA development environment is also aware of this OS
specific requirement and thus is able to ensure the consistent quality
locally. Lv Zheng.
Link: 68af3c3a
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 80e24663b212daac0c32767fdbd8a46892292f1f
This patch introduces acpi_tb_unload_table() to eliminate redundant code from
acpi_ex_unload_table() and acpi_unload_parent_table().
No functional change. Lv Zheng.
Link: 80e24663
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 7fdac0289faa1c28b91413c8e394e87372aa69e6
acpi_tb_install_and_load_table() can invoke acpi_tb_load_table() to eliminate
redundant code.
No functional change. Lv Zheng.
Link: 7fdac028
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 543342ab7a676f4eb0c9f100d349388a84dff0e8
This patch changes acpi_ev_initialize_region(), stop returning AE_NOT_EXIST
from it so that, not only in acpi_ds_load2_end_op(), but all places invoking
this function won't emit exceptions. The exception can be seen in
acpi_ds_initialize_objects() when certain table loading mode is chosen.
This patch also removes useless acpi_ns_locked from acpi_ev_initialize_region()
as this function will always be invoked with interpreter lock held now, and
the lock granularity has been tuned to lock around _REG execution, thus it
is now handled by acpi_ex_exit_interpreter(). Lv Zheng.
Link: 543342ab
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit bc481e758e54f7644fd0b657119ca7763d8b6a9c
This is a back port result of the following commit:
Commit: 8633db6b02
Subject: ACPICA: Dispatcher: Fix interpreter locking around acpi_ev_initialize_region()
Link: bc481e75
Signed-off-by: Lv Zheng <lv.zheng@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Trivial fix to spelling mistake "oustanding" to "outstanding" in
comment and dev_dbg message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
According to both DTS (example and actual files), and Linux driver code,
the first interrupt specifier should be the Channel interrupt, while the
second interrupt specifier should be the Global interrupt.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>